MPLS-LC-ATM-MIB-DRAFT-01

File: MPLS-LC-ATM-MIB-DRAFT-01.mib (9584 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
ATM-TC-MIB MPLS-TC-STD-MIB MPLS-LSR-STD-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE MODULE-COMPLIANCE
OBJECT-GROUP RowStatus StorageType
TruthValue AtmVpIdentifier mplsStdMIB
MplsAtmVcIdentifier mplsInterfaceIndex

Defined Types

MplsLcAtmIfConfEntry  
SEQUENCE    
  mplsLcAtmCtrlVpi AtmVpIdentifier
  mplsLcAtmCtrlVci MplsAtmVcIdentifier
  mplsLcAtmUnlabTrafVpi AtmVpIdentifier
  mplsLcAtmUnlabTrafVci MplsAtmVcIdentifier
  mplsLcAtmVcMerge TruthValue
  mplsLcAtmIfConfRowStatus RowStatus
  mplsLcAtmIfConfStoreType StorageType

Defined Values

mplsLcAtmMIB 1.3.6.1.2.1.10.166.1
This MIB contains managed object definitions for MPLS Label Controlled ATM interfaces as defined in RFC3035.
MODULE-IDENTITY    

mplsLcAtmNotifications 1.3.6.1.2.1.10.166.1.0
OBJECT IDENTIFIER    

mplsLcAtmObjects 1.3.6.1.2.1.10.166.1.1
OBJECT IDENTIFIER    

mplsLcAtmConformance 1.3.6.1.2.1.10.166.1.2
OBJECT IDENTIFIER    

mplsLcAtmIfConfTable 1.3.6.1.2.1.10.166.1.1.1
This table specifies per-interface MPLS LC-ATM capability and associated information. In particular, this table extends the MPLS-LSR MIB's mplsInterfaceConfTable.
OBJECT-TYPE    
  SEQUENCE OF  
    MplsLcAtmIfConfEntry

mplsLcAtmIfConfEntry 1.3.6.1.2.1.10.166.1.1.1.1
An entry in this table is created by an LSR for every interface capable of supporting MPLS LC-ATM. Each entry in this table will exist only if a corresponding entry in ifTable and mplsInterfaceConfTable exist. If the associated entries in ifTable and mplsInterfaceConfTable are deleted, the corresponding entry in this table must also be deleted shortly thereafter.
OBJECT-TYPE    
  MplsLcAtmIfConfEntry  

mplsLcAtmCtrlVpi 1.3.6.1.2.1.10.166.1.1.1.1.1
This is the VPI value over which this LSR is willing to accept control traffic on this interface.
OBJECT-TYPE    
  AtmVpIdentifier  

mplsLcAtmCtrlVci 1.3.6.1.2.1.10.166.1.1.1.1.2
This is the VCI value over which this LSR is willing to accept control traffic on this interface.
OBJECT-TYPE    
  MplsAtmVcIdentifier  

mplsLcAtmUnlabTrafVpi 1.3.6.1.2.1.10.166.1.1.1.1.3
This is the max VPI value over which this LSR is willing to accept unlabeled traffic on this interface.
OBJECT-TYPE    
  AtmVpIdentifier  

mplsLcAtmUnlabTrafVci 1.3.6.1.2.1.10.166.1.1.1.1.4
This is the VCI value over which this LSR is willing to accept unlabled traffic on this interface.
OBJECT-TYPE    
  MplsAtmVcIdentifier  

mplsLcAtmVcMerge 1.3.6.1.2.1.10.166.1.1.1.1.5
If set to true(0), indicates that this interface is capabile of ATM VC merge, otherwise it MUST be set to false(1).
OBJECT-TYPE    
  TruthValue  

mplsLcAtmIfConfRowStatus 1.3.6.1.2.1.10.166.1.1.1.1.6
This is object is used to create and delete entries in this table. When configuring entries in this table, the corresponding corresponding ifEntry and mplsInterfaceConfEntry MUST exist before hand. If an entry is attempted to be created by a manager for a corresponding mplsInterfaceConfEntry that does not support LC-ATM, the agent MUST return an inconsistentValue error. If this table is implemented read-only, then the agent must set this object to active(1) when this row is made active. If this table is implemented writable, then an agent MUST not allow modification to its objects once this value is set to active(1).
OBJECT-TYPE    
  RowStatus  

mplsLcAtmIfConfStoreType 1.3.6.1.2.1.10.166.1.1.1.1.7
This SNMP storage type for this entry. All objects are writable for permanent objects.
OBJECT-TYPE    
  StorageType  

mplsLcAtmCompliances 1.3.6.1.2.1.10.166.1.2.1
OBJECT IDENTIFIER    

mplsLcAtmGroups 1.3.6.1.2.1.10.166.1.2.2
OBJECT IDENTIFIER    

mplsLcAtmModuleCompliance 1.3.6.1.2.1.10.166.1.2.1.1
Write access is not required.
MODULE-COMPLIANCE    

mplsLcAtmIfGroup 1.3.6.1.2.1.10.166.1.2.2.1
Collection of objects needed for MPLS LC-ATM interface configuration.
OBJECT-GROUP