MOXA-IKS6726A-MIB

File: MOXA-IKS6726A-MIB.mib (148083 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC

Imported symbols

enterprises MODULE-IDENTITY NOTIFICATION-TYPE
IpAddress OBJECT-TYPE DateAndTime
TEXTUAL-CONVENTION MacAddress DisplayString

Defined Types

PortList  
TEXTUAL-CONVENTION    
  current STRING

PortEntry  
SEQUENCE    
  portIndex INTEGER
  portDesc DisplayString
  portEnable INTEGER
  portSpeed INTEGER
  portMDI INTEGER
  portFDXFlowCtrl INTEGER
  portName DisplayString

MonitorPortEntry  
SEQUENCE    
  monitorLinkStatus INTEGER
  monitorSpeed INTEGER
  monitorAutoMDI INTEGER
  monitorTraffic INTEGER
  monitorFDXFlowCtrl INTEGER
  monitorTxTraffic INTEGER
  monitorRxTraffic INTEGER

MonitorDiEntry  
SEQUENCE    
  diIndex INTEGER
  diInputStatus INTEGER

MonitorSFPEntry  
SEQUENCE    
  sfpPort DisplayString
  sfpModelName DisplayString
  sfpTemperature DisplayString
  sfpVoltage DisplayString
  sfpTxPower DisplayString
  sfpRxPower DisplayString

SetDevIpEntry  
SEQUENCE    
  setDevIpIndex INTEGER
  setDevIpCurrentIpofDevice DisplayString
  setDevIpPresentBy INTEGER
  setDevIpDedicatedIp IpAddress

TrunkSettingEntry  
SEQUENCE    
  trunkSettingIndex INTEGER
  trunkType INTEGER
  trunkMemberPorts PortList

TrunkEntry  
SEQUENCE    
  trunkIndex INTEGER
  trunkPort INTEGER
  trunkStatus INTEGER

TurboRingPortEntry  
SEQUENCE    
  turboRingPortIndex INTEGER
  turboRingPortStatus INTEGER
  turboRingPortDesignatedBridge STRING
  turboRingPortDesignatedPort INTEGER

SpanningTreeEntry  
SEQUENCE    
  spanningTreeIndex INTEGER
  enableSpanningTree INTEGER
  spanningTreePortPriority INTEGER
  spanningTreePortCost INTEGER
  spanningTreePortStatus INTEGER
  spanningTreePortEdge INTEGER

QosPortEntry  
SEQUENCE    
  inspectTos INTEGER
  inspectCos INTEGER
  portPriority INTEGER

CosMappingEntry  
SEQUENCE    
  cosTag INTEGER
  cosMappedPriority INTEGER

TosMappingEntry  
SEQUENCE    
  tosClass INTEGER
  tosMappedPriority INTEGER

VlanPortSettingEntry  
SEQUENCE    
  portVlanType INTEGER
  portDefaultVid INTEGER
  portFixedVid DisplayString
  portFixedVidUntag DisplayString
  portForbiddenVid DisplayString

VlanEntry  
SEQUENCE    
  vlanId INTEGER
  joinedAccessPorts PortList
  joinedTrunkPorts PortList
  joinedHybridPorts PortList

PortbaseVlanSettingEntry  
SEQUENCE    
  portbaseVlanSettingIndex INTEGER
  portbaseVlanMemberPorts PortList

IgmpSnoopingSettingEntry  
SEQUENCE    
  enableIgmpSnooping INTEGER
  enableQuerier INTEGER
  fixedMulticastQuerierPorts PortList
  learnedMulticastQuerierPorts PortList

StaticMulticastEntry  
SEQUENCE    
  staticMulticastAddress MacAddress
  staticMulticastPorts PortList
  staticMulticastStatus INTEGER

GmrpSettingEntry  
SEQUENCE    
  enableGMRP INTEGER

GmrpEntry  
SEQUENCE    
  gmrpMulticastGroup MacAddress
  gmrpFixedPorts PortList
  gmrpLearnedPorts PortList

MfbSettingEntry  
SEQUENCE    
  filterBehavior INTEGER

NormalModeRateLimitingEntry  
SEQUENCE    
  ingressLimitRate INTEGER
  egressLimit INTEGER

PortDisableModeEntry  
SEQUENCE    
  ingressLimit INTEGER

Dot1xSettingEntry  
SEQUENCE    
  enableDot1X INTEGER

Dot1xReauthEntry  
SEQUENCE    
  dot1xReauthPortIndex INTEGER
  dot1xReauth INTEGER

PortAccessControlEntry  
SEQUENCE    
  portAccessControlAddress MacAddress
  portAccessControlPortNo INTEGER
  portAccessControlAccessStatus INTEGER
  portAccessControlStatus INTEGER

AccessibleIpEntry  
SEQUENCE    
  accessibleIpAddress IpAddress
  accessibleIpNetMask IpAddress
  accessibleIpStatus INTEGER

DhcpFunctionTableEntry  
SEQUENCE    
  dhcpPortIndex INTEGER
  circuitID DisplayString
  option82Enable INTEGER

PtpPortEntry  
SEQUENCE    
  ptpPortIndex INTEGER
  ptpPortEnable INTEGER
  ptpPortStatus INTEGER

EventlogEntry  
SEQUENCE    
  eventlogIndex INTEGER
  eventlogBootup INTEGER
  eventlogDate DisplayString
  eventlogTime DisplayString
  eventlogUptime DisplayString
  eventlogEvent DisplayString

SystemEventSettingsEntry  
SEQUENCE    
  systemEventIndex INTEGER
  systemEventActive INTEGER
  systemEventName DisplayString
  systemEventSupport INTEGER
  systemEventModuleEnable INTEGER
  systemEventSeverity INTEGER

PortEventSettingsEntry  
SEQUENCE    
  portEventIndex INTEGER
  portEventLabel DisplayString
  portEventActive INTEGER
  portEventEnable INTEGER
  portEventTrafficThreshold INTEGER
  portEventTrafficDuration INTEGER
  portEventModuleEnable INTEGER
  portEventSeverity INTEGER

Defined Values

moxa 1.3.6.1.4.1.8691
OBJECT IDENTIFIER    

industrialEthernet 1.3.6.1.4.1.8691.7
OBJECT IDENTIFIER    

iks6726A 1.3.6.1.4.1.8691.7.116
The MIB module for Moxa IKS-6726A series specific information.
MODULE-IDENTITY    

swMgmt 1.3.6.1.4.1.8691.7.116.1
OBJECT IDENTIFIER    

swTraps 1.3.6.1.4.1.8691.7.116.2
OBJECT IDENTIFIER    

numberOfPorts 1.3.6.1.4.1.8691.7.116.1.1
Total Ports.
OBJECT-TYPE    
  INTEGER  

switchModel 1.3.6.1.4.1.8691.7.116.1.2
The switch model.
OBJECT-TYPE    
  DisplayString  

firmwareVersion 1.3.6.1.4.1.8691.7.116.1.4
The firmware version.
OBJECT-TYPE    
  DisplayString  

enableWebConfig 1.3.6.1.4.1.8691.7.116.1.5
This enable the Web. configuration function.
OBJECT-TYPE    
  INTEGER disable(0), httpOrHttps(1), httpsOnly(2)  

consoleLoginMode 1.3.6.1.4.1.8691.7.116.1.51
This option can change console login mode.
OBJECT-TYPE    
  INTEGER menu(0), cli(1)  

enableTelnetConsole 1.3.6.1.4.1.8691.7.116.1.6
This enable telnet console.
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

lineSwapRecovery 1.3.6.1.4.1.8691.7.116.1.7
This enable line-swap-fast-recovery function.
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

ageTime 1.3.6.1.4.1.8691.7.116.1.44
Web Timeout
OBJECT-TYPE    
  INTEGER  

networkSetting 1.3.6.1.4.1.8691.7.116.1.8
OBJECT IDENTIFIER    

switchIpAddr 1.3.6.1.4.1.8691.7.116.1.8.1
The IP Address of this switch.
OBJECT-TYPE    
  IpAddress  

switchIpMask 1.3.6.1.4.1.8691.7.116.1.8.2
The netmask of this switch.
OBJECT-TYPE    
  IpAddress  

defaultGateway 1.3.6.1.4.1.8691.7.116.1.8.3
The default gateway of this switch.
OBJECT-TYPE    
  IpAddress  

enableAutoIpConfig 1.3.6.1.4.1.8691.7.116.1.8.4
This enable the automatic IP address configuration function.
OBJECT-TYPE    
  INTEGER disable(0), enableDHCP(1), enableBOOTP(2)  

dnsServer1IpAddr 1.3.6.1.4.1.8691.7.116.1.8.5
The first DNS server's IP address
OBJECT-TYPE    
  IpAddress  

snmpTrapCommunity 1.3.6.1.4.1.8691.7.116.1.8.6
The SNMP trap community name
OBJECT-TYPE    
  DisplayString  

trapServerAddr 1.3.6.1.4.1.8691.7.116.1.8.7
The IP address/Domain name of SNMP trap server
OBJECT-TYPE    
  DisplayString  

dnsServer2IpAddr 1.3.6.1.4.1.8691.7.116.1.8.8
The second DNS server's IP address
OBJECT-TYPE    
  IpAddress  

snmpReadCommunity 1.3.6.1.4.1.8691.7.116.1.8.9
The SNMP read community name
OBJECT-TYPE    
  DisplayString  

snmpTrap2Community 1.3.6.1.4.1.8691.7.116.1.8.11
The Second SNMP trap community name
OBJECT-TYPE    
  DisplayString  

trap2ServerAddr 1.3.6.1.4.1.8691.7.116.1.8.12
The IP address/Domain name of Second SNMP trap server
OBJECT-TYPE    
  DisplayString  

snmpInformEnable 1.3.6.1.4.1.8691.7.116.1.8.13
This enable the snmpInform function.
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

snmpInformRetries 1.3.6.1.4.1.8691.7.116.1.8.14
The snmp inform retry times of SNMP trap server
OBJECT-TYPE    
  INTEGER 1..99  

snmpInformTimeout 1.3.6.1.4.1.8691.7.116.1.8.15
The snmp inform interval of SNMP trap server
OBJECT-TYPE    
  INTEGER 1..300  

dhcpRetryPeriods 1.3.6.1.4.1.8691.7.116.1.8.16
The DHCP retry periods.
OBJECT-TYPE    
  INTEGER  

dhcpRetryTimes 1.3.6.1.4.1.8691.7.116.1.8.17
The dhcp retry times.
OBJECT-TYPE    
  INTEGER  

trapVersion 1.3.6.1.4.1.8691.7.116.1.8.18
Version of SNMP trap
OBJECT-TYPE    
  INTEGER snmpv1-Trap(0), snmpv2-Notification(1), snmpv2-Inform(2)  

portSetting 1.3.6.1.4.1.8691.7.116.1.9
OBJECT IDENTIFIER    

portTable 1.3.6.1.4.1.8691.7.116.1.9.1
The port table.
OBJECT-TYPE    
  SEQUENCE OF  
    PortEntry

portEntry 1.3.6.1.4.1.8691.7.116.1.9.1.1
The port entry.
OBJECT-TYPE    
  PortEntry  

portIndex 1.3.6.1.4.1.8691.7.116.1.9.1.1.1
The port index.
OBJECT-TYPE    
  INTEGER  

portDesc 1.3.6.1.4.1.8691.7.116.1.9.1.1.2
The port description
OBJECT-TYPE    
  DisplayString  

portEnable 1.3.6.1.4.1.8691.7.116.1.9.1.1.3
This enable the port.
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

portSpeed 1.3.6.1.4.1.8691.7.116.1.9.1.1.4
The port speed and duplex.
OBJECT-TYPE    
  INTEGER auto(0), speed100M-Full(1), speed100M-Half(2), speed10M-Full(3), speed10M-Half(4), speed1000M-Full(5)  

portMDI 1.3.6.1.4.1.8691.7.116.1.9.1.1.5
The port MDI/MDIX.
OBJECT-TYPE    
  INTEGER na(0), auto(1), mdi(2), mdiX(3)  

portFDXFlowCtrl 1.3.6.1.4.1.8691.7.116.1.9.1.1.6
The port FDX Flow Control
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

portName 1.3.6.1.4.1.8691.7.116.1.9.1.1.7
The port Name
OBJECT-TYPE    
  DisplayString  

monitor 1.3.6.1.4.1.8691.7.116.1.10
OBJECT IDENTIFIER    

power1InputStatus 1.3.6.1.4.1.8691.7.116.1.10.1
The status of the first power input.
OBJECT-TYPE    
  INTEGER not-present(0), present(1)  

power2InputStatus 1.3.6.1.4.1.8691.7.116.1.10.2
The status of the second power input.
OBJECT-TYPE    
  INTEGER not-present(0), present(1)  

monitorPortTable 1.3.6.1.4.1.8691.7.116.1.10.3
The port table of monitor function.
OBJECT-TYPE    
  SEQUENCE OF  
    MonitorPortEntry

monitorPortEntry 1.3.6.1.4.1.8691.7.116.1.10.3.1
The port table entry of monitor function.
OBJECT-TYPE    
  MonitorPortEntry  

monitorLinkStatus 1.3.6.1.4.1.8691.7.116.1.10.3.1.2
The port link status.
OBJECT-TYPE    
  INTEGER disable(-1), off(0), on(1)  

monitorSpeed 1.3.6.1.4.1.8691.7.116.1.10.3.1.3
The port speed and duplex status.
OBJECT-TYPE    
  INTEGER speed1000M-Full(5), speed1000M-Half(4), speed100M-Full(3), speed100M-Half(2), speed10M-Full(1), speed10M-Half(0), na(-1)  

monitorAutoMDI 1.3.6.1.4.1.8691.7.116.1.10.3.1.4
The port MDI/MDIX status.
OBJECT-TYPE    
  INTEGER mdiX(1), mdi(0), na(-1)  

monitorTraffic 1.3.6.1.4.1.8691.7.116.1.10.3.1.5
The trafic loading percentage of port.
OBJECT-TYPE    
  INTEGER  

monitorFDXFlowCtrl 1.3.6.1.4.1.8691.7.116.1.10.3.1.6
The Full-Duplex flow control status
OBJECT-TYPE    
  INTEGER off(0), on(1)  

monitorTxTraffic 1.3.6.1.4.1.8691.7.116.1.10.3.1.7
The TX traffic loading percentage of port.
OBJECT-TYPE    
  INTEGER  

monitorRxTraffic 1.3.6.1.4.1.8691.7.116.1.10.3.1.8
The RTX traffic loading percentage of port.
OBJECT-TYPE    
  INTEGER  

monitorDiTable 1.3.6.1.4.1.8691.7.116.1.10.4
The DI table of monitor function.
OBJECT-TYPE    
  SEQUENCE OF  
    MonitorDiEntry

monitorDiEntry 1.3.6.1.4.1.8691.7.116.1.10.4.1
The DI table entry of monitor function.
OBJECT-TYPE    
  MonitorDiEntry  

diIndex 1.3.6.1.4.1.8691.7.116.1.10.4.1.1
The DI index of monitor function
OBJECT-TYPE    
  INTEGER 1..2  

diInputStatus 1.3.6.1.4.1.8691.7.116.1.10.4.1.2
The DI input status.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

monitorSFPTable 1.3.6.1.4.1.8691.7.116.1.10.7
The SFP table of monitor function.
OBJECT-TYPE    
  SEQUENCE OF  
    MonitorSFPEntry

monitorSFPEntry 1.3.6.1.4.1.8691.7.116.1.10.7.1
The SFP table entry of monitor function.
OBJECT-TYPE    
  MonitorSFPEntry  

sfpPort 1.3.6.1.4.1.8691.7.116.1.10.7.1.1
The SFP index of monitor function
OBJECT-TYPE    
  DisplayString  

sfpModelName 1.3.6.1.4.1.8691.7.116.1.10.7.1.2
The SFP ModelName of monitor function
OBJECT-TYPE    
  DisplayString  

sfpTemperature 1.3.6.1.4.1.8691.7.116.1.10.7.1.3
The SFP Temperature(¢XC) of monitor function
OBJECT-TYPE    
  DisplayString  

sfpVoltage 1.3.6.1.4.1.8691.7.116.1.10.7.1.4
The SFP Voltage(V) of monitor function
OBJECT-TYPE    
  DisplayString  

sfpTxPower 1.3.6.1.4.1.8691.7.116.1.10.7.1.5
The SFP TX power(dBm) of monitor function
OBJECT-TYPE    
  DisplayString  

sfpRxPower 1.3.6.1.4.1.8691.7.116.1.10.7.1.6
The SFP RX power(dBm) of monitor function
OBJECT-TYPE    
  DisplayString  

powerConsumption 1.3.6.1.4.1.8691.7.116.1.10.8
Current power comsuption(Watts). Accurate to second decimal place.
OBJECT-TYPE    
  DisplayString  

emailWarning 1.3.6.1.4.1.8691.7.116.1.11
OBJECT IDENTIFIER    

emailService 1.3.6.1.4.1.8691.7.116.1.11.1
OBJECT IDENTIFIER    

emailWarningMailServer 1.3.6.1.4.1.8691.7.116.1.11.1.1
The email server's Ip Address/Domain name of email warning function.
OBJECT-TYPE    
  DisplayString  

emailWarningSMTPPort 1.3.6.1.4.1.8691.7.116.1.11.1.6
The email server's SMTP port of email warning function.
OBJECT-TYPE    
  INTEGER 1..65536  

emailWarningFirstEmailAddr 1.3.6.1.4.1.8691.7.116.1.11.1.2
The first email address of email warning function.
OBJECT-TYPE    
  DisplayString  

emailWarningSecondEmailAddr 1.3.6.1.4.1.8691.7.116.1.11.1.3
The second email address of email warning function.
OBJECT-TYPE    
  DisplayString  

emailWarningThirdEmailAddr 1.3.6.1.4.1.8691.7.116.1.11.1.4
The third email address of email warning function.
OBJECT-TYPE    
  DisplayString  

emailWarningFourthEmailAddr 1.3.6.1.4.1.8691.7.116.1.11.1.5
The fourth email address of email warning function.
OBJECT-TYPE    
  DisplayString  

setDeviceIp 1.3.6.1.4.1.8691.7.116.1.12
OBJECT IDENTIFIER    

setDevIpTable 1.3.6.1.4.1.8691.7.116.1.12.1
The set devvice IP table.
OBJECT-TYPE    
  SEQUENCE OF  
    SetDevIpEntry

setDevIpEntry 1.3.6.1.4.1.8691.7.116.1.12.1.1
The set devvice IP table entry.
OBJECT-TYPE    
  SetDevIpEntry  

setDevIpIndex 1.3.6.1.4.1.8691.7.116.1.12.1.1.1
The set devvice IP index.
OBJECT-TYPE    
  INTEGER  

setDevIpCurrentIpofDevice 1.3.6.1.4.1.8691.7.116.1.12.1.1.2
The current IP address of connected to this port.
OBJECT-TYPE    
  DisplayString  

setDevIpPresentBy 1.3.6.1.4.1.8691.7.116.1.12.1.1.3
The protocol used that assigning IP to the device.
OBJECT-TYPE    
  INTEGER no(0), dhcpClient(1), rarp(2), bootp(4)  

setDevIpDedicatedIp 1.3.6.1.4.1.8691.7.116.1.12.1.1.4
The IP address when assign to the device connected to this port.
OBJECT-TYPE    
  IpAddress  

mirroring 1.3.6.1.4.1.8691.7.116.1.13
OBJECT IDENTIFIER    

targetPort 1.3.6.1.4.1.8691.7.116.1.13.1
The mirrored port of mirroring function.
OBJECT-TYPE    
  INTEGER  

mirroringPort 1.3.6.1.4.1.8691.7.116.1.13.2
The mirroring port of mirroring function.
OBJECT-TYPE    
  INTEGER  

monitorDirection 1.3.6.1.4.1.8691.7.116.1.13.3
The traffic direction of mirroring function.
OBJECT-TYPE    
  INTEGER inputDataStream(0), outputDataStream(1), biDirectional(2)  

portTrunking 1.3.6.1.4.1.8691.7.116.1.14
OBJECT IDENTIFIER    

trunkSettingTable 1.3.6.1.4.1.8691.7.116.1.14.1
Port Trunking Setting Table.
OBJECT-TYPE    
  SEQUENCE OF  
    TrunkSettingEntry

trunkSettingEntry 1.3.6.1.4.1.8691.7.116.1.14.1.1
Port Trunking Setting Entry.
OBJECT-TYPE    
  TrunkSettingEntry  

trunkSettingIndex 1.3.6.1.4.1.8691.7.116.1.14.1.1.1
Trunking Group Index.
OBJECT-TYPE    
  INTEGER  

trunkType 1.3.6.1.4.1.8691.7.116.1.14.1.1.2
Trunking Group Type.
OBJECT-TYPE    
  INTEGER static(1), lacp(2)  

trunkMemberPorts 1.3.6.1.4.1.8691.7.116.1.14.1.1.3
Trunking Group Member Ports.
OBJECT-TYPE    
  PortList  

trunkTable 1.3.6.1.4.1.8691.7.116.1.14.2
Port Trunking Table.
OBJECT-TYPE    
  SEQUENCE OF  
    TrunkEntry

trunkEntry 1.3.6.1.4.1.8691.7.116.1.14.2.1
Port Trunking Entry.
OBJECT-TYPE    
  TrunkEntry  

trunkIndex 1.3.6.1.4.1.8691.7.116.1.14.2.1.1
Trunking Group Index.
OBJECT-TYPE    
  INTEGER  

trunkPort 1.3.6.1.4.1.8691.7.116.1.14.2.1.2
Trunking Group Member Port.
OBJECT-TYPE    
  INTEGER  

trunkStatus 1.3.6.1.4.1.8691.7.116.1.14.2.1.3
Trunking Port Status.
OBJECT-TYPE    
  INTEGER success(1), fail(2), standby(3)  

commRedundancy 1.3.6.1.4.1.8691.7.116.1.16
OBJECT IDENTIFIER    

protocolOfRedundancySetup 1.3.6.1.4.1.8691.7.116.1.16.1
This set the redundancy protocol of this switch.
OBJECT-TYPE    
  INTEGER spanningTree(1), turboRing(2), turboRingV2(3), turboChain(4), mstp(5)  

turboRing 1.3.6.1.4.1.8691.7.116.1.16.2
OBJECT IDENTIFIER    

turboRingMaster 2.1
Is this a Master or Slave.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

turboRingMasterSetup 2.2
Set this to be Master.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

turboRingPortTable 2.3
Turbo Ring Port Table.
OBJECT-TYPE    
  SEQUENCE OF  
    TurboRingPortEntry

turboRingPortEntry 2.3.1
Turbo Ring Port Entry.
OBJECT-TYPE    
  TurboRingPortEntry  

turboRingPortIndex 2.3.1.1
Turbo Ring Port Index.
OBJECT-TYPE    
  INTEGER  

turboRingPortStatus 2.3.1.2
Turbo Ring Port Status.
OBJECT-TYPE    
  INTEGER portDisabled(0), notTurboRingPort(1), linkDown(2), blocked(3), learning(4), forwarding(5)  

turboRingPortDesignatedBridge 2.3.1.3
The MAC address of the bridge which this port considers to be the Designated Bridge for this port's segment.
OBJECT-TYPE    
  MacAddress  

turboRingPortDesignatedPort 2.3.1.4
The Port Number of the port on the Designated Bridge for this port's segment.
OBJECT-TYPE    
  INTEGER  

turboRingDesignatedMaster 2.6
The MAC address of the bridge which is the Master of the TURBO RING.
OBJECT-TYPE    
  MacAddress  

turboRingRdntPort1 2.7
The port number of 1st Redundant Port on the TURBO RING.
OBJECT-TYPE    
  INTEGER  

turboRingRdntPort2 2.8
The port number of 2nd Redundant Port on the TURBO RING.
OBJECT-TYPE    
  INTEGER  

turboRingEnableCoupling 2.9
This enable the ring coupling function.
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

turboRingCouplingPort 2.10
The coupling port of ring coupling function.
OBJECT-TYPE    
  INTEGER  

turboRingCouplingPortStatus 2.11
The coupling port status of ring coupling function.
OBJECT-TYPE    
  INTEGER portDisabled(0), notCouplingPort(1), linkDown(2), blocked(3), forwarding(5)  

turboRingControlPort 2.12
The control port of ring coupling function.
OBJECT-TYPE    
  INTEGER  

turboRingControlPortStatus 2.13
The control port status of ring coupling function.
OBJECT-TYPE    
  INTEGER portDisabled(0), notControlPort(1), linkDown(2), blocked(3), forwarding(5), inactive(6), active(7)  

turboRingBrokenStatus 2.14
Turbo Ring broken display.
OBJECT-TYPE    
  INTEGER na(0), normal(1), broken(2)  

spanningTree 1.3.6.1.4.1.8691.7.116.1.16.3
OBJECT IDENTIFIER    

spanningTreeRoot 1.1
The root of spanning tree.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

spanningTreeBridgePriority 1.2
The bridge priority of spanning tree protocol.
OBJECT-TYPE    
  INTEGER priority0(0), priority4096(4096), priority8192(8192), priority12288(12288), priority16384(16384), priority20480(20480), priority24576(24576), priority28672(28672), priority32768(32768), priority36864(36864), priority40960(40960), priority45056(45056), priority49152(49152), priority53248(53248), priority57344(57344), priority61440(61440)  

spanningTreeHelloTime 1.3
The hello time of spanning tree protocol.
OBJECT-TYPE    
  INTEGER  

spanningTreeMaxAge 1.4
The max. age of spanning tree protocol.
OBJECT-TYPE    
  INTEGER  

spanningTreeForwardingDelay 1.5
Tje forwarding delay of spanning tree protocol.
OBJECT-TYPE    
  INTEGER  

spanningTreeTable 1.6
The spanning tree table.
OBJECT-TYPE    
  SEQUENCE OF  
    SpanningTreeEntry

spanningTreeEntry 1.6.1
The spanning tree port entry.
OBJECT-TYPE    
  SpanningTreeEntry  

spanningTreeIndex 1.6.1.1
The index of spanning tree table.
OBJECT-TYPE    
  INTEGER  

enableSpanningTree 1.6.1.2
This enable of spanning tree protocol for this port.
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

spanningTreePortPriority 1.6.1.3
The port priority of spanning tree protocol.
OBJECT-TYPE    
  INTEGER priority0(0), priority16(16), priority32(32), priority48(48), priority64(64), priority80(80), priority96(96), priority112(112), priority128(128), priority144(144), priority160(160), priority176(176), priority192(192), priority208(208), priority224(224), priority240(240)  

spanningTreePortCost 1.6.1.4
The port cost of spanning tree protocol.
OBJECT-TYPE    
  INTEGER  

spanningTreePortStatus 1.6.1.5
The port status of spanning tree protocol.
OBJECT-TYPE    
  INTEGER portDisabled(0), notSpanningTreePort(1), linkDown(2), blocked(3), learning(4), forwarding(5)  

spanningTreePortEdge 1.6.1.6
This configures the Edge Port property for this port.
OBJECT-TYPE    
  INTEGER auto(0), forceEdge(1), false(2)  

activeProtocolOfRedundancy 1.3.6.1.4.1.8691.7.116.1.16.4
This shows the active redundancy protocol of this switch now. The none(0) stauts will be showed if only if the switch's redundancy protocol is set to spanning tree and none of ports enable spanning tree.
OBJECT-TYPE    
  INTEGER none(0), spanningTree(1), turboRing(2), turboRingV2(3), turboChain(4), mstp(5)  

turboRingV2 1.3.6.1.4.1.8691.7.116.1.16.5
OBJECT IDENTIFIER    

turboRingV2Ring1 3.1
OBJECT IDENTIFIER    

ringIndexRing1 3.1.1
The turboRingV2 Ring Index.
OBJECT-TYPE    
  INTEGER 1..2  

ringEnableRing1 3.1.2
The turboRingV2 Ring1 Enalbe Config.
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

masterSetupRing1 3.1.3
Is this a Master or Slave.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

masterStatusRing1 3.1.4
Set this to be Master.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

designatedMasterRing1 3.1.5
The MAC address of the bridge which is the Master of the turboRingV2.
OBJECT-TYPE    
  MacAddress  

rdnt1stPortRing1 3.1.6
The port number of 1st Redundant Port on the turboRingV2.
OBJECT-TYPE    
  INTEGER  

rdnt1stPortStatusRing1 3.1.7
The status of 1st Redundant Port on the turboRingV2.
OBJECT-TYPE    
  INTEGER disabled(0), notRedundant(1), linkdown(2), blocking(3), learning(4), forwarding(5)  

rdnt2ndPortRing1 3.1.8
The port number of 2nd Redundant Port on the turboRingV2.
OBJECT-TYPE    
  INTEGER  

rdnt2ndPortStatusRing1 3.1.9
The status of 2nd Redundant Port on the turboRingV2.
OBJECT-TYPE    
  INTEGER disabled(0), notRedundant(1), linkdown(2), blocking(3), learning(4), forwarding(5)  

brokenStatusRing1 3.1.10
turboRingV2 broken display.
OBJECT-TYPE    
  INTEGER na(0), normal(1), broken(2)  

turboRingV2Ring2 3.2
OBJECT IDENTIFIER    

ringIndexRing2 3.2.1
The turboRingV2 Ring Index.
OBJECT-TYPE    
  INTEGER 1..2  

ringEnableRing2 3.2.2
The turboRingV2 Ring2 Enalbe Config.
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

masterSetupRing2 3.2.3
Is this a Master or Slave.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

masterStatusRing2 3.2.4
Set this to be Master.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

designatedMasterRing2 3.2.5
The MAC address of the bridge which is the Master of the turboRingV2.
OBJECT-TYPE    
  MacAddress  

rdnt1stPortRing2 3.2.6
The port number of 1st Redundant Port on the turboRingV2.
OBJECT-TYPE    
  INTEGER  

rdnt1stPortStatusRing2 3.2.7
The status of 1st Redundant Port on the turboRingV2.
OBJECT-TYPE    
  INTEGER disabled(0), notRedundant(1), linkdown(2), blocking(3), learning(4), forwarding(5)  

rdnt2ndPortRing2 3.2.8
The port number of 2nd Redundant Port on the turboRingV2.
OBJECT-TYPE    
  INTEGER  

rdnt2ndPortStatusRing2 3.2.9
The status of 2nd Redundant Port on the turboRingV2.
OBJECT-TYPE    
  INTEGER disabled(0), notRedundant(1), linkdown(2), blocking(3), learning(4), forwarding(5)  

brokenStatusRing2 3.2.10
turboRingV2 broken display.
OBJECT-TYPE    
  INTEGER na(0), normal(1), broken(2)  

turboRingV2Coupling 3.3
OBJECT IDENTIFIER    

couplingEnable 3.3.1
Setting the ring coupling enable.
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

couplingMode 3.3.2
Setting the ring coupling mode.
OBJECT-TYPE    
  INTEGER dualHoming(1), couplingBackup(2), couplingPrimary(3)  

coupling1stPort 3.3.3
If in 'DUAL HOMING' mode,port name is 'Primary port',If in 'COUPLING' mode,port name is 'Coupling port'
OBJECT-TYPE    
  INTEGER  

coupling1stPortStatus 3.3.4
The 1st coupling port status of coupling function.
OBJECT-TYPE    
  INTEGER disabled(0), notRedundant(1), linkdown(2), blocking(3), learning(4), forwarding(5)  

coupling2ndPort 3.3.5
If in 'DUAL HOMING' mode,port name is 'Backup port',If in 'COUPLING' mode,port name is no used.
OBJECT-TYPE    
  INTEGER  

coupling2ndPortStatus 3.3.6
The 2nd coupling port status of coupling function.
OBJECT-TYPE    
  INTEGER disabled(0), notRedundant(1), linkdown(2), blocking(3), learning(4), forwarding(5)  

turboChain 1.3.6.1.4.1.8691.7.116.1.16.6
OBJECT IDENTIFIER    

turboChainRole 4.1
The Role of TURBO CHAIN.
OBJECT-TYPE    
  INTEGER head(1), member(2), tail(3)  

turboChainPort1 4.2
The port number of 1st Redundant Port on the TURBO CHAIN. If switch role is Turbo Chain Head, this is Head port, If Switch role is Turbo Chain Tail, this is Tail port.
OBJECT-TYPE    
  INTEGER  

turboChainPort2 4.3
The port number of 2nd Redundant Port on the TURBO CHAIN. It is the member port of TurboChain
OBJECT-TYPE    
  INTEGER  

turboChainPort1Status 4.4
Turbo Chain Port Status.
OBJECT-TYPE    
  INTEGER notTurboChainPort(0), linkDown(1), blocking(2), blocked(3), forwarding(4), na(5)  

turboChainPort2Status 4.5
Turbo Chain Port Status.
OBJECT-TYPE    
  INTEGER notTurboChainPort(0), linkDown(1), blocking(2), blocked(3), forwarding(4), na(5)  

turboChainPort1PartnerBridge 4.6
The MAC address of the next bridge
OBJECT-TYPE    
  MacAddress  

turboChainPort2PartnerBridge 4.7
The MAC address of the neighbor Turbo Chain switch
OBJECT-TYPE    
  MacAddress  

trafficPrioritization 1.3.6.1.4.1.8691.7.116.1.18
OBJECT IDENTIFIER    

qosClassification 1.3.6.1.4.1.8691.7.116.1.18.1
OBJECT IDENTIFIER    

queuingMechanism 1.3.6.1.4.1.8691.7.116.1.18.1.1
The queuing mechanism.
OBJECT-TYPE    
  INTEGER schedweightfair(0), schedstrict(1)  

qosPortTable 1.3.6.1.4.1.8691.7.116.1.18.1.2
The QoS port table.
OBJECT-TYPE    
  SEQUENCE OF  
    QosPortEntry

qosPortEntry 1.3.6.1.4.1.8691.7.116.1.18.1.2.1
The QoS Port Entry.
OBJECT-TYPE    
  QosPortEntry  

inspectTos 1.3.6.1.4.1.8691.7.116.1.18.1.2.1.1
This enable the inspection of ToS field.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

inspectCos 1.3.6.1.4.1.8691.7.116.1.18.1.2.1.2
This enable the inspection of CoS field.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

portPriority 1.3.6.1.4.1.8691.7.116.1.18.1.2.1.3
The deault priority of the port.
OBJECT-TYPE    
  INTEGER priority0(0), priority1(1), priority2(2), priority3(3), priority4(4), priority5(5), priority6(6), priority7(7)  

cosMapping 1.3.6.1.4.1.8691.7.116.1.18.2
OBJECT IDENTIFIER    

cosMappingTable 1.3.6.1.4.1.8691.7.116.1.18.2.1
The COS mapping table.
OBJECT-TYPE    
  SEQUENCE OF  
    CosMappingEntry

cosMappingEntry 1.3.6.1.4.1.8691.7.116.1.18.2.1.1
The COS mapping Entry.
OBJECT-TYPE    
  CosMappingEntry  

cosTag 1.3.6.1.4.1.8691.7.116.1.18.2.1.1.1
The cos tag of TOS field.
OBJECT-TYPE    
  INTEGER 0..7  

cosMappedPriority 1.3.6.1.4.1.8691.7.116.1.18.2.1.1.2
The frame's priority corresponding to it's COS tag value.
OBJECT-TYPE    
  INTEGER trafficclass0(0), trafficclass1(1), trafficclass2(2), trafficclass3(3)  

tosMapping 1.3.6.1.4.1.8691.7.116.1.18.3
OBJECT IDENTIFIER    

tosMappingTable 1.3.6.1.4.1.8691.7.116.1.18.3.1
The TOS mapping table.
OBJECT-TYPE    
  SEQUENCE OF  
    TosMappingEntry

tosMappingEntry 1.3.6.1.4.1.8691.7.116.1.18.3.1.1
TOS mapping Entry.
OBJECT-TYPE    
  TosMappingEntry  

tosClass 1.3.6.1.4.1.8691.7.116.1.18.3.1.1.1
The TOS class of TOS field.
OBJECT-TYPE    
  INTEGER  

tosMappedPriority 1.3.6.1.4.1.8691.7.116.1.18.3.1.1.2
The frame's priority corresponding to it's TOS class value.
OBJECT-TYPE    
  INTEGER priority0(0), priority1(1), priority2(2), priority3(3), priority4(4), priority5(5), priority6(6), priority7(7)  

vlan 1.3.6.1.4.1.8691.7.116.1.19
OBJECT IDENTIFIER    

vlanPortSettingTable 1.3.6.1.4.1.8691.7.116.1.19.1
The vlan seting table of ports.
OBJECT-TYPE    
  SEQUENCE OF  
    VlanPortSettingEntry

vlanPortSettingEntry 1.3.6.1.4.1.8691.7.116.1.19.1.1
Port Setting Entry of VLAN.
OBJECT-TYPE    
  VlanPortSettingEntry  

portVlanType 1.3.6.1.4.1.8691.7.116.1.19.1.1.1
The vlan type of port.
OBJECT-TYPE    
  INTEGER access(0), trunk(1), hybrid(2)  

portDefaultVid 1.3.6.1.4.1.8691.7.116.1.19.1.1.2
The PVID of port.
OBJECT-TYPE    
  INTEGER 1..4094  

portFixedVid 1.3.6.1.4.1.8691.7.116.1.19.1.1.3
The fixed vids of (trunk) port.
OBJECT-TYPE    
  DisplayString  

portForbiddenVid 1.3.6.1.4.1.8691.7.116.1.19.1.1.4
The forbidden vids of (trunk)port.
OBJECT-TYPE    
  DisplayString  

portFixedVidUntag 1.3.6.1.4.1.8691.7.116.1.19.1.1.5
The fixed untag vids of (trunk) port.
OBJECT-TYPE    
  DisplayString  

vlanTable 1.3.6.1.4.1.8691.7.116.1.19.2
The VLAN table.
OBJECT-TYPE    
  SEQUENCE OF  
    VlanEntry

vlanEntry 1.3.6.1.4.1.8691.7.116.1.19.2.1
VLAN Entry.
OBJECT-TYPE    
  VlanEntry  

vlanId 1.3.6.1.4.1.8691.7.116.1.19.2.1.1
The VLAN id.
OBJECT-TYPE    
  INTEGER 1..4094  

joinedAccessPorts 1.3.6.1.4.1.8691.7.116.1.19.2.1.2
The access ports that joined this VID.
OBJECT-TYPE    
  PortList  

joinedTrunkPorts 1.3.6.1.4.1.8691.7.116.1.19.2.1.3
The trunk ports that joined this VID.
OBJECT-TYPE    
  PortList  

joinedHybridPorts 1.3.6.1.4.1.8691.7.116.1.19.2.1.4
The hybrid ports that joined this VID.
OBJECT-TYPE    
  PortList  

managementVlanId 1.3.6.1.4.1.8691.7.116.1.19.3
The management VLAN id.
OBJECT-TYPE    
  INTEGER  

vlanType 1.3.6.1.4.1.8691.7.116.1.19.4
VLAN Type.
OBJECT-TYPE    
  INTEGER tagBased(0), portBased(1)  

portbaseVlanSettingTable 1.3.6.1.4.1.8691.7.116.1.19.5
Port base Vlan Setting Table.
OBJECT-TYPE    
  SEQUENCE OF  
    PortbaseVlanSettingEntry

portbaseVlanSettingEntry 1.3.6.1.4.1.8691.7.116.1.19.5.1
Port base Vlan Setting Entry.
OBJECT-TYPE    
  PortbaseVlanSettingEntry  

portbaseVlanSettingIndex 1.3.6.1.4.1.8691.7.116.1.19.5.1.1
port base Vlan Group Index.
OBJECT-TYPE    
  INTEGER  

portbaseVlanMemberPorts 1.3.6.1.4.1.8691.7.116.1.19.5.1.2
port base Vlan Group Member Ports.
OBJECT-TYPE    
  PortList  

enableGvrp 1.3.6.1.4.1.8691.7.116.1.19.6
Enable GVRP.
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

multicastFiltering 1.3.6.1.4.1.8691.7.116.1.20
OBJECT IDENTIFIER    

igmpSnooping 1.3.6.1.4.1.8691.7.116.1.20.1
OBJECT IDENTIFIER    

querierQueryInterval 1.3.6.1.4.1.8691.7.116.1.20.1.1
This query interval of the querier function for this VLAN.
OBJECT-TYPE    
  INTEGER 20..600  

igmpSnoopingSettingTable 1.3.6.1.4.1.8691.7.116.1.20.1.2
The IGMP snooping setting table.
OBJECT-TYPE    
  SEQUENCE OF  
    IgmpSnoopingSettingEntry

igmpSnoopingSettingEntry 1.3.6.1.4.1.8691.7.116.1.20.1.2.1
The IGMP snooping setting Entry.
OBJECT-TYPE    
  IgmpSnoopingSettingEntry  

enableIgmpSnooping 1.3.6.1.4.1.8691.7.116.1.20.1.2.1.1
This enable the IGMP snooping functon in this VLAN.
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

enableQuerier 1.3.6.1.4.1.8691.7.116.1.20.1.2.1.2
This enable the querier function for this VLAN.
OBJECT-TYPE    
  INTEGER disable(0), igmpv2(1), igmpv3(2)  

fixedMulticastQuerierPorts 1.3.6.1.4.1.8691.7.116.1.20.1.2.1.3
The ports that multicast-Querier exist.
OBJECT-TYPE    
  PortList  

learnedMulticastQuerierPorts 1.3.6.1.4.1.8691.7.116.1.20.1.2.1.4
The ports that multicast-Querier exist.
OBJECT-TYPE    
  PortList  

enableGlobalIgmpSnooping 1.3.6.1.4.1.8691.7.116.1.20.1.4
This enable the IGMP snooping functon .
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

multicastFastForwarding 1.3.6.1.4.1.8691.7.116.1.20.1.7
This Enable Multicast Fast Forwarding Mode functon .
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

staticMulticast 1.3.6.1.4.1.8691.7.116.1.20.2
OBJECT IDENTIFIER    

staticMulticastTable 1.3.6.1.4.1.8691.7.116.1.20.2.1
The static multicast table.
OBJECT-TYPE    
  SEQUENCE OF  
    StaticMulticastEntry

staticMulticastEntry 1.3.6.1.4.1.8691.7.116.1.20.2.1.1
Static multicast Entry.
OBJECT-TYPE    
  StaticMulticastEntry  

staticMulticastAddress 1.3.6.1.4.1.8691.7.116.1.20.2.1.1.1
The static multicast address.
OBJECT-TYPE    
  MacAddress  

staticMulticastPorts 1.3.6.1.4.1.8691.7.116.1.20.2.1.1.2
The port map of the static multicast address.
OBJECT-TYPE    
  PortList  

staticMulticastStatus 1.3.6.1.4.1.8691.7.116.1.20.2.1.1.3
The status is active to indicate normal. Use createAndGo to create new on multiple SET. Use createAndWait to create new on one SET all then actvie. Use destroy to delete this row.
OBJECT-TYPE    
  INTEGER active(1), createAndGo(4), createAndWait(5), destroy(6)  

gmrp 1.3.6.1.4.1.8691.7.116.1.20.3
OBJECT IDENTIFIER    

gmrpSettingTable 1.3.6.1.4.1.8691.7.116.1.20.3.1
The GMRP setting table.
OBJECT-TYPE    
  SEQUENCE OF  
    GmrpSettingEntry

gmrpSettingEntry 1.3.6.1.4.1.8691.7.116.1.20.3.1.1
The GMRP Setting Entry.
OBJECT-TYPE    
  GmrpSettingEntry  

enableGMRP 1.3.6.1.4.1.8691.7.116.1.20.3.1.1.1
Enable/Disable GMRP.
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

gmrpTable 1.3.6.1.4.1.8691.7.116.1.20.3.2
The GMRP status table.
OBJECT-TYPE    
  SEQUENCE OF  
    GmrpEntry

gmrpEntry 1.3.6.1.4.1.8691.7.116.1.20.3.2.1
The GMRP Status Entry.
OBJECT-TYPE    
  GmrpEntry  

gmrpMulticastGroup 1.3.6.1.4.1.8691.7.116.1.20.3.2.1.1
GMRP multicast group.
OBJECT-TYPE    
  MacAddress  

gmrpFixedPorts 1.3.6.1.4.1.8691.7.116.1.20.3.2.1.2
The ports that joined GMRP multicast group manually.
OBJECT-TYPE    
  PortList  

gmrpLearnedPorts 1.3.6.1.4.1.8691.7.116.1.20.3.2.1.3
The ports that joined GMRP multicast group by GMRP learning.
OBJECT-TYPE    
  PortList  

mfb 1.3.6.1.4.1.8691.7.116.1.20.4
OBJECT IDENTIFIER    

mfbSettingTable 1.3.6.1.4.1.8691.7.116.1.20.4.1
The Multicast Filtering Behavior setting table.
OBJECT-TYPE    
  SEQUENCE OF  
    MfbSettingEntry

mfbSettingEntry 1.3.6.1.4.1.8691.7.116.1.20.4.1.1
The Multicast Filtering Behavior Setting Entry.
OBJECT-TYPE    
  MfbSettingEntry  

filterBehavior 1.3.6.1.4.1.8691.7.116.1.20.4.1.1.1
Port forward multicast packet behavior.
OBJECT-TYPE    
  INTEGER forwardUnknown(2), filterUnknown(3)  

rateLimiting 1.3.6.1.4.1.8691.7.116.1.21
OBJECT IDENTIFIER    

rateLimitingMode 1.3.6.1.4.1.8691.7.116.1.21.4
The rate limiting mode.
OBJECT-TYPE    
  INTEGER normal(0), portDisable(1)  

normalModeRateLimitingTable 1.3.6.1.4.1.8691.7.116.1.21.1
The rate limiting table.
OBJECT-TYPE    
  SEQUENCE OF  
    NormalModeRateLimitingEntry

normalModeRateLimitingEntry 1.3.6.1.4.1.8691.7.116.1.21.1.1
Rate limiting Entry.
OBJECT-TYPE    
  NormalModeRateLimitingEntry  

ingressLimitRate 1.3.6.1.4.1.8691.7.116.1.21.1.1.1
The ingress limit mode.
OBJECT-TYPE    
  INTEGER notlimited(0), percentage03(1), percentage05(2), percentage10(3), percentage15(4), percentage25(5), percentage35(6), percentage50(7), percentage65(8), percentage85(9)  

egressLimit 1.3.6.1.4.1.8691.7.116.1.21.1.1.2
The ingress limit mode.
OBJECT-TYPE    
  INTEGER notlimited(0), percentage03(1), percentage05(2), percentage10(3), percentage15(4), percentage25(5), percentage35(6), percentage50(7), percentage65(8), percentage85(9)  

broadcastStormProtection 1.3.6.1.4.1.8691.7.116.1.21.2
OBJECT IDENTIFIER    

enableBcastStormProtection 1.3.6.1.4.1.8691.7.116.1.21.2.1
Enable Broadcast Storm Protection
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

bcastStormIncludeMcast 1.3.6.1.4.1.8691.7.116.1.21.2.2
Broadcast Storm Protection includes Multicast packets
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

bcastStormIncludeUnkonwnMcastUcast 1.3.6.1.4.1.8691.7.116.1.21.2.3
Broadcast Storm Protection includes Unkonwn Multicast and Unknown Unicast Packet packets
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

unicastFilterBehavior 1.3.6.1.4.1.8691.7.116.1.21.2.4
OBJECT IDENTIFIER    

ufbIncludeUnkonwnUcast 1.3.6.1.4.1.8691.7.116.1.21.2.4.1
Unicast Filter Behavior includes Unknown Unicast packets
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

portDisableMode 1.3.6.1.4.1.8691.7.116.1.21.3
OBJECT IDENTIFIER    

portDisableModePeriod 1.3.6.1.4.1.8691.7.116.1.21.3.1
Check time.
OBJECT-TYPE    
  INTEGER 1..65535  

portDisableModeTable 1.3.6.1.4.1.8691.7.116.1.21.3.2
The rate limiting table.
OBJECT-TYPE    
  SEQUENCE OF  
    PortDisableModeEntry

portDisableModeEntry 1.3.6.1.4.1.8691.7.116.1.21.3.2.1
Rate limiting Entry.
OBJECT-TYPE    
  PortDisableModeEntry  

ingressLimit 1.3.6.1.4.1.8691.7.116.1.21.3.2.1.1
The ingress limit mode.
OBJECT-TYPE    
  INTEGER notlimited(0), rateMega1Fps4464(1), rateMega2Fps7441(2), rateMega3Fps14881(3), rateMega4Fps22322(4), rateMega5Fps37203(5), rateMega6Fps52084(6), rateMega7Fps74405(7), rateGiga1Fps44640(8), rateGiga2Fps74410(9), rateGiga3Fps148810(10), rateGiga4Fps223220(11), rateGiga5Fps372030(12), rateGiga6Fps520840(13), rateGiga7Fps744050(14)  

security 1.3.6.1.4.1.8691.7.116.1.22
OBJECT IDENTIFIER    

userLoginSetting 1.3.6.1.4.1.8691.7.116.1.22.1
OBJECT IDENTIFIER    

userLoginServer 1.3.6.1.4.1.8691.7.116.1.22.1.1
Set user login server option.
OBJECT-TYPE    
  INTEGER tacacs(1), radius(2)  

tacacsServerSetting 1.3.6.1.4.1.8691.7.116.1.22.1.2
OBJECT IDENTIFIER    

tacacsLoginAuthServer 1.3.6.1.4.1.8691.7.116.1.22.1.2.1
Set Tacacs+ Server IP Address/Domain name.
OBJECT-TYPE    
  DisplayString  

tacacsLoginAuthPort 1.3.6.1.4.1.8691.7.116.1.22.1.2.2
Set Tacacs+ Port.
OBJECT-TYPE    
  INTEGER 1..65535  

tacacsLoginAuthSharedKey 1.3.6.1.4.1.8691.7.116.1.22.1.2.3
Set Tacacs+ Shared Key.
OBJECT-TYPE    
  DisplayString  

tacacsLoginAuthAuthType 1.3.6.1.4.1.8691.7.116.1.22.1.2.4
Set Tacacs+ Shared Key.
OBJECT-TYPE    
  INTEGER ascii(0), pap(1), chap(2), mschap(4)  

tacacsLoginAuthTimeout 1.3.6.1.4.1.8691.7.116.1.22.1.2.5
Set Tacacs+ Shared Key.
OBJECT-TYPE    
  INTEGER 1..255  

radiusServerSetting 1.3.6.1.4.1.8691.7.116.1.22.1.3
OBJECT IDENTIFIER    

radiusLoginAuthServer 1.3.6.1.4.1.8691.7.116.1.22.1.3.1
Set Radius Server IP Address/Domain name.
OBJECT-TYPE    
  DisplayString  

radiusLoginAuthPort 1.3.6.1.4.1.8691.7.116.1.22.1.3.2
Set Radius Port.
OBJECT-TYPE    
  INTEGER 1..65535  

radiusLoginAuthSharedKey 1.3.6.1.4.1.8691.7.116.1.22.1.3.3
Set Radius Shared Key.
OBJECT-TYPE    
  DisplayString  

radiusLoginAuthAuthType 1.3.6.1.4.1.8691.7.116.1.22.1.3.4
Set Radius Shared Key.
OBJECT-TYPE    
  INTEGER eap-md5(0)  

radiusLoginAuthTimeout 1.3.6.1.4.1.8691.7.116.1.22.1.3.5
Set Radius Shared Key.
OBJECT-TYPE    
  INTEGER 1..255  

portAccessControl 1.3.6.1.4.1.8691.7.116.1.22.2
OBJECT IDENTIFIER    

staticPortLock 1.3.6.1.4.1.8691.7.116.1.22.2.1
OBJECT IDENTIFIER    

staticPortLockAddress 1.3.6.1.4.1.8691.7.116.1.22.2.1.1
The static port lock address.
OBJECT-TYPE    
  MacAddress  

staticPortLockPort 1.3.6.1.4.1.8691.7.116.1.22.2.1.2
The port of the static port lock address.
OBJECT-TYPE    
  INTEGER  

staticPortLockStatus 1.3.6.1.4.1.8691.7.116.1.22.2.1.3
The status is active to indicate normal. Use createAndGo to create new on multiple SET.
OBJECT-TYPE    
  INTEGER active(1), createAndGo(4)  

dot1x 1.3.6.1.4.1.8691.7.116.1.22.2.2
OBJECT IDENTIFIER    

dataBaseOption 1.3.6.1.4.1.8691.7.116.1.22.2.2.1
Set IEEE 802.1X database option.
OBJECT-TYPE    
  INTEGER local(1), radius(2), radiuslocal(3)  

dot1xReauthEnable 1.3.6.1.4.1.8691.7.116.1.22.2.2.5
Enable/Disable IEEE 802.1X Re-authentication.
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

dot1xReauthPeriod 1.3.6.1.4.1.8691.7.116.1.22.2.2.6
Set IEEE 802.1X Re-authentication Period.
OBJECT-TYPE    
  INTEGER 60..3600  

dot1xSettingTable 1.3.6.1.4.1.8691.7.116.1.22.2.2.7
IEEE 802.1X Port Setting Table.
OBJECT-TYPE    
  SEQUENCE OF  
    Dot1xSettingEntry

dot1xSettingEntry 1.3.6.1.4.1.8691.7.116.1.22.2.2.7.1
IEEE 802.1X Port Setting Entry.
OBJECT-TYPE    
  Dot1xSettingEntry  

enableDot1X 1.3.6.1.4.1.8691.7.116.1.22.2.2.7.1.1
Enable/Disable IEEE 802.1X.
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

dot1xReauthTable 1.3.6.1.4.1.8691.7.116.1.22.2.2.8
IEEE 802.1X Re-authentication Table.
OBJECT-TYPE    
  SEQUENCE OF  
    Dot1xReauthEntry

dot1xReauthEntry 1.3.6.1.4.1.8691.7.116.1.22.2.2.8.1
IEEE 802.1X Re-authentication Entry.
OBJECT-TYPE    
  Dot1xReauthEntry  

dot1xReauthPortIndex 1.3.6.1.4.1.8691.7.116.1.22.2.2.8.1.1
IEEE 802.1X Enabled Port Index.
OBJECT-TYPE    
  INTEGER  

dot1xReauth 1.3.6.1.4.1.8691.7.116.1.22.2.2.8.1.2
Reauth IEEE 802.1X.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

dot1xRadius 1.3.6.1.4.1.8691.7.116.1.22.2.2.9
OBJECT IDENTIFIER    

dot1xSameAsAuthServer 1.3.6.1.4.1.8691.7.116.1.22.2.2.9.1
Set Radius Server IP Address/Domain name.
OBJECT-TYPE    
  INTEGER notSame(0), same(1)  

dot1x1stRadiusServer 1.3.6.1.4.1.8691.7.116.1.22.2.2.9.2
Set Radius Server IP Address/Domain name.
OBJECT-TYPE    
  DisplayString  

dot1x1stRadiusPort 1.3.6.1.4.1.8691.7.116.1.22.2.2.9.3
Set Radius Port.
OBJECT-TYPE    
  INTEGER 1..65535  

dot1x1stRadiusSharedKey 1.3.6.1.4.1.8691.7.116.1.22.2.2.9.4
Set Radius Shared Key.
OBJECT-TYPE    
  DisplayString  

dot1x2ndRadiusServer 1.3.6.1.4.1.8691.7.116.1.22.2.2.9.5
Set Radius Server IP Address/Domain name.
OBJECT-TYPE    
  DisplayString  

dot1x2ndRadiusPort 1.3.6.1.4.1.8691.7.116.1.22.2.2.9.6
Set Radius Port.
OBJECT-TYPE    
  INTEGER 1..65535  

dot1x2ndRadiusSharedKey 1.3.6.1.4.1.8691.7.116.1.22.2.2.9.7
Set Radius Shared Key.
OBJECT-TYPE    
  DisplayString  

portAccessControlTable 1.3.6.1.4.1.8691.7.116.1.22.2.3
The Port Access Control table.
OBJECT-TYPE    
  SEQUENCE OF  
    PortAccessControlEntry

portAccessControlEntry 1.3.6.1.4.1.8691.7.116.1.22.2.3.1
The Port Access Control table entry.
OBJECT-TYPE    
  PortAccessControlEntry  

portAccessControlAddress 1.3.6.1.4.1.8691.7.116.1.22.2.3.1.1
The MAC address which is static locked or IEEE 802.1X authorized.
OBJECT-TYPE    
  MacAddress  

portAccessControlPortNo 1.3.6.1.4.1.8691.7.116.1.22.2.3.1.2
The port number that the Port Access Control address resides.
OBJECT-TYPE    
  INTEGER  

portAccessControlAccessStatus 1.3.6.1.4.1.8691.7.116.1.22.2.3.1.3
The access status of the Port Access Control address.
OBJECT-TYPE    
  INTEGER staticLock(1), authorized(2), unAuthorized(3), authorizing(4)  

portAccessControlStatus 1.3.6.1.4.1.8691.7.116.1.22.2.3.1.4
The status is active to indicate normal. Use createAndGo to create new on multiple SET. Use createAndWait to create new on one SET all then actvie. Use destroy to delete this row.
OBJECT-TYPE    
  INTEGER active(1), createAndGo(4), createAndWait(5), destroy(6)  

accessibleIP 1.3.6.1.4.1.8691.7.116.1.30
OBJECT IDENTIFIER    

enableAccessibleIP 1.3.6.1.4.1.8691.7.116.1.30.1
Enable the accessible IP address list.
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

accessibleIpTable 1.3.6.1.4.1.8691.7.116.1.30.2
accessibleIP.
OBJECT-TYPE    
  SEQUENCE OF  
    AccessibleIpEntry

accessibleIpEntry 1.3.6.1.4.1.8691.7.116.1.30.2.1
Accessible IP address entry.
OBJECT-TYPE    
  AccessibleIpEntry  

accessibleIpAddress 1.3.6.1.4.1.8691.7.116.1.30.2.1.1
Accessible IP address
OBJECT-TYPE    
  IpAddress  

accessibleIpNetMask 1.3.6.1.4.1.8691.7.116.1.30.2.1.2
Accessible IP netmask.
OBJECT-TYPE    
  IpAddress  

accessibleIpStatus 1.3.6.1.4.1.8691.7.116.1.30.2.1.3
The status is active to indicate normal. Use createAndGo to create new on multiple SET. Use createAndWait to create new on one SET all then actvie. Use destroy to delete this row.
OBJECT-TYPE    
  INTEGER active(1), createAndGo(4), createAndWait(5), destroy(6)  

sysFileUpdate 1.3.6.1.4.1.8691.7.116.1.31
OBJECT IDENTIFIER    

tftpServer 1.3.6.1.4.1.8691.7.116.1.31.1
The TFTP Server name(IP Address)
OBJECT-TYPE    
  DisplayString  

firmwarePathName 1.3.6.1.4.1.8691.7.116.1.31.2
The path name of firmware file in the TFTP Server
OBJECT-TYPE    
  DisplayString  

logPathName 1.3.6.1.4.1.8691.7.116.1.31.3
The path name of log file in the TFTP Server
OBJECT-TYPE    
  DisplayString  

confPathName 1.3.6.1.4.1.8691.7.116.1.31.4
The path name of configuration file in the TFTP Server
OBJECT-TYPE    
  DisplayString  

tftpUpdate 1.3.6.1.4.1.8691.7.116.1.31.5
Tok_String
OBJECT-TYPE    
  INTEGER importFirmware(1), importConfig(2), exportConfig(3), exportLog(4)  

timeSetting 1.3.6.1.4.1.8691.7.116.1.32
OBJECT IDENTIFIER    

sysDateTime 1.3.6.1.4.1.8691.7.116.1.32.1
The date time of system
OBJECT-TYPE    
  DateAndTime  

calibratePeriod 1.3.6.1.4.1.8691.7.116.1.32.2
The period (seconds) that calibrate with time server
OBJECT-TYPE    
  INTEGER  

timeServer1 1.3.6.1.4.1.8691.7.116.1.32.3
The first time server
OBJECT-TYPE    
  DisplayString  

timeServer2 1.3.6.1.4.1.8691.7.116.1.32.4
The second time server
OBJECT-TYPE    
  DisplayString  

daylightSaving 1.3.6.1.4.1.8691.7.116.1.32.5
OBJECT IDENTIFIER    

startMonth 1.3.6.1.4.1.8691.7.116.1.32.5.1
Setting Start Month of Daylight Saving time
OBJECT-TYPE    
  INTEGER na(0), jan(1), feb(2), mar(3), apr(4), may(5), jun(6), jul(7), aug(8), sep(9), oct(10), nov(11), dec(12)  

startWeek 1.3.6.1.4.1.8691.7.116.1.32.5.2
Setting Start Week of Daylight Saving time
OBJECT-TYPE    
  INTEGER na(0), week1(1), week2(2), week3(3), week4(4), weeklast(6)  

startDay 1.3.6.1.4.1.8691.7.116.1.32.5.3
Setting Start Day of Daylight Saving time
OBJECT-TYPE    
  INTEGER na(0), sun(1), mon(2), tue(3), wed(4), thu(5), fri(6), sat(7)  

startHour 1.3.6.1.4.1.8691.7.116.1.32.5.4
Setting Start Hour of Daylight Saving time
OBJECT-TYPE    
  INTEGER  

endMonth 1.3.6.1.4.1.8691.7.116.1.32.5.5
Setting End Month of Daylight Saving time
OBJECT-TYPE    
  INTEGER na(0), jan(1), feb(2), mar(3), apr(4), may(5), jun(6), jul(7), aug(8), sep(9), oct(10), nov(11), dec(12)  

endWeek 1.3.6.1.4.1.8691.7.116.1.32.5.6
Setting End Week of Daylight Saving time
OBJECT-TYPE    
  INTEGER na(0), week1(1), week2(2), week3(3), week4(4), weeklast(6)  

endDay 1.3.6.1.4.1.8691.7.116.1.32.5.7
Setting End Day of Daylight Saving time
OBJECT-TYPE    
  INTEGER na(0), sun(1), mon(2), tue(3), wed(4), thu(5), fri(6), sat(7)  

endHour 1.3.6.1.4.1.8691.7.116.1.32.5.8
Setting End Hour of Daylight Saving time
OBJECT-TYPE    
  INTEGER  

offsetHours 1.3.6.1.4.1.8691.7.116.1.32.5.9
Setting Offset Hours of Daylight Saving time
OBJECT-TYPE    
  INTEGER  

enableNTPServer 1.3.6.1.4.1.8691.7.116.1.32.6
This enable NTP Server.
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

clockSource 1.3.6.1.4.1.8691.7.116.1.32.7
The clock source of system
OBJECT-TYPE    
  INTEGER local(0), sntp(1), ntp(2)  

backupMediaSetting 1.3.6.1.4.1.8691.7.116.1.35
OBJECT IDENTIFIER    

abc02Status 1.3.6.1.4.1.8691.7.116.1.35.2
Current status of ABC-02
OBJECT-TYPE    
  INTEGER device-not-present(0), unauthorized-media(1), detecting(2), working(3), ready-and-removable(4)  

abc02AutoImportConfig 1.3.6.1.4.1.8691.7.116.1.35.3
Auto load configuration from ABC to system when boot up
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

abc02AutoExportConfig 1.3.6.1.4.1.8691.7.116.1.35.4
Auto backup to ABC-02 when configuration change
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

abc02AutoExportLog 1.3.6.1.4.1.8691.7.116.1.35.5
Auto backup of event log to prevent overwrite
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

enableWarmStart 1.3.6.1.4.1.8691.7.116.1.36
Enable to restart MOXA ethernet switch.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

syslogSetting 1.3.6.1.4.1.8691.7.116.1.37
OBJECT IDENTIFIER    

syslogServer1 1.3.6.1.4.1.8691.7.116.1.37.1
The syslog server 1
OBJECT-TYPE    
  DisplayString  

syslogServer1port 1.3.6.1.4.1.8691.7.116.1.37.2
The syslog server 1 port
OBJECT-TYPE    
  INTEGER  

syslogServer2 1.3.6.1.4.1.8691.7.116.1.37.3
The syslog server 2
OBJECT-TYPE    
  DisplayString  

syslogServer2port 1.3.6.1.4.1.8691.7.116.1.37.4
The syslog server 2 port
OBJECT-TYPE    
  INTEGER  

syslogServer3 1.3.6.1.4.1.8691.7.116.1.37.5
The syslog server 3
OBJECT-TYPE    
  DisplayString  

syslogServer3port 1.3.6.1.4.1.8691.7.116.1.37.6
The syslog server 3 port
OBJECT-TYPE    
  INTEGER  

dhcpRelayAgentSetting 1.3.6.1.4.1.8691.7.116.1.39
OBJECT IDENTIFIER    

dhcpServer1 1.3.6.1.4.1.8691.7.116.1.39.1
The dhcp Relay Agent Server 1.
OBJECT-TYPE    
  DisplayString  

dhcpServer2 1.3.6.1.4.1.8691.7.116.1.39.2
The dhcp Relay Agent Server 2.
OBJECT-TYPE    
  DisplayString  

dhcpServer3 1.3.6.1.4.1.8691.7.116.1.39.3
The dhcp Relay Agent Server 3.
OBJECT-TYPE    
  DisplayString  

dhcpServer4 1.3.6.1.4.1.8691.7.116.1.39.4
The dhcp Relay Agent Server 4.
OBJECT-TYPE    
  DisplayString  

option82Setting 1.3.6.1.4.1.8691.7.116.1.39.5
OBJECT IDENTIFIER    

enableOption82 1.3.6.1.4.1.8691.7.116.1.39.5.1
Enable DHCP Option 82
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

option82Type 1.3.6.1.4.1.8691.7.116.1.39.5.2
Option 82 Type selector
OBJECT-TYPE    
  INTEGER ip(0), mac(1), client-id(2), other(3)  

option82Value 1.3.6.1.4.1.8691.7.116.1.39.5.3
Option 82 Type Value
OBJECT-TYPE    
  DisplayString  

option82ValueDisplay 1.3.6.1.4.1.8691.7.116.1.39.5.4
Option 82 Type Value Display
OBJECT-TYPE    
  DisplayString  

dhcpFunctionTable 1.3.6.1.4.1.8691.7.116.1.39.6
DHCP Function Table.
OBJECT-TYPE    
  SEQUENCE OF  
    DhcpFunctionTableEntry

dhcpFunctionTableEntry 1.3.6.1.4.1.8691.7.116.1.39.6.1
DHCP Function Table Entry.
OBJECT-TYPE    
  DhcpFunctionTableEntry  

dhcpPortIndex 1.3.6.1.4.1.8691.7.116.1.39.6.1.1
The DHCP Port Index.
OBJECT-TYPE    
  INTEGER  

circuitID 1.3.6.1.4.1.8691.7.116.1.39.6.1.2
The Circuit ID.
OBJECT-TYPE    
  DisplayString  

option82Enable 1.3.6.1.4.1.8691.7.116.1.39.6.1.3
This enable option 82 of the port.
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

ieee1588Setting 1.3.6.1.4.1.8691.7.116.1.41
OBJECT IDENTIFIER    

ptpv1Setting 1.3.6.1.4.1.8691.7.116.1.41.1
OBJECT IDENTIFIER    

enablePtpv1 1.3.6.1.4.1.8691.7.116.1.41.1.1
This enable the PTP functon.
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

clockModev1 1.3.6.1.4.1.8691.7.116.1.41.1.2
the clock mode of the PTP clock.
OBJECT-TYPE    
  INTEGER v1BC(0), v2E2E2stepTC(1), v2P2PTC(3), v2E2EBC(4), v2P2PBC(5)  

syncIntervalv1 1.3.6.1.4.1.8691.7.116.1.41.1.3
the logSyncInterval of the PTP clock.
OBJECT-TYPE    
  INTEGER oneSec(0), twoSec(1), fourSec(2), eightSec(3), sixteenSec(4)  

subDomainNamev1 1.3.6.1.4.1.8691.7.116.1.41.1.4
The subdomain name of the PTP clock.
OBJECT-TYPE    
  INTEGER dflt(0), alt1(1), alt2(2), alt3(3)  

preferMasterv1 1.3.6.1.4.1.8691.7.116.1.41.1.5
This enable the PTP prefer master function.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

ptpv2Setting 1.3.6.1.4.1.8691.7.116.1.41.2
OBJECT IDENTIFIER    

enablePtp 1.3.6.1.4.1.8691.7.116.1.41.2.1
This enable the PTP functon.
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

clockMode 1.3.6.1.4.1.8691.7.116.1.41.2.2
the clock mode of the PTP clock.
OBJECT-TYPE    
  INTEGER v1BC(0), v2E2E2stepTC(1), v2P2PTC(3), v2E2EBC(4), v2P2PBC(5)  

transport 1.3.6.1.4.1.8691.7.116.1.41.2.3
the transport mode of the PTP clock.
OBJECT-TYPE    
  INTEGER ieee802dot3(0), ipv4(1)  

syncInterval 1.3.6.1.4.1.8691.7.116.1.41.2.4
the logSyncInterval of the PTP clock.
OBJECT-TYPE    
  INTEGER t128msec(-3), t256msec(-2), t512msec(-1), t1sec(0), t2sec(1)  

logMinDelayReqInterval 1.3.6.1.4.1.8691.7.116.1.41.2.5
the logMinDelayReqInterval of the PTP clock.
OBJECT-TYPE    
  INTEGER t1sec(0), t2sec(1), t4sec(2), t8sec(3), t16sec(4), t32sec(5)  

logMinPdelayReqInterval 1.3.6.1.4.1.8691.7.116.1.41.2.6
the logMinPdelayReqInterval of the PTP clock.
OBJECT-TYPE    
  INTEGER t512msec(-1), t1sec(0), t2sec(1), t4sec(2), t8sec(3), t16sec(4), t32sec(5)  

logAnnounceInterval 1.3.6.1.4.1.8691.7.116.1.41.2.7
the logAnnounceInterval of the PTP clock.
OBJECT-TYPE    
  INTEGER t1sec(0), t2sec(1), t4sec(2), t8sec(3), t16sec(4)  

announceReceiptTimeout 1.3.6.1.4.1.8691.7.116.1.41.2.8
the announceReceiptTimeout of the PTP clock.
OBJECT-TYPE    
  INTEGER 2..10  

priority1 1.3.6.1.4.1.8691.7.116.1.41.2.9
the priority1 of the PTP clock.
OBJECT-TYPE    
  INTEGER  

priority2 1.3.6.1.4.1.8691.7.116.1.41.2.10
the priority2 of the PTP clock.
OBJECT-TYPE    
  INTEGER  

clockClass 1.3.6.1.4.1.8691.7.116.1.41.2.11
the clockClass of the PTP clock.
OBJECT-TYPE    
  INTEGER  

domainNumber 1.3.6.1.4.1.8691.7.116.1.41.2.12
The domain number of the PTP clock.
OBJECT-TYPE    
  INTEGER dflt(0), alt1(1), alt2(2), alt3(3)  

localUtcOffset 1.3.6.1.4.1.8691.7.116.1.41.2.13
the UTC offset of the local PTP clock.
OBJECT-TYPE    
  INTEGER  

localUtcOffsetValid 1.3.6.1.4.1.8691.7.116.1.41.2.14
the UTC offset valid of the local PTP clock.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

localLeap59 1.3.6.1.4.1.8691.7.116.1.41.2.15
the leap59 of the local PTP clock.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

localLeap61 1.3.6.1.4.1.8691.7.116.1.41.2.16
the leap61 of the local PTP clock.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

localPtpTimescale 1.3.6.1.4.1.8691.7.116.1.41.2.17
the timescale of the local PTP clock.
OBJECT-TYPE    
  INTEGER arb(0), ptp(1)  

localArbTime 1.3.6.1.4.1.8691.7.116.1.41.2.18
the ARB time of the local PTP clock.
OBJECT-TYPE    
  INTEGER  

ptpv1Status 1.3.6.1.4.1.8691.7.116.1.41.3
OBJECT IDENTIFIER    

offsetToMasterv1 1.3.6.1.4.1.8691.7.116.1.41.3.1
The offset to master for nsec.
OBJECT-TYPE    
  INTEGER  

meanPathDelayv1 1.3.6.1.4.1.8691.7.116.1.41.3.2
The mean path delay of the PTP clock.
OBJECT-TYPE    
  INTEGER  

grandMasterUuidv1 1.3.6.1.4.1.8691.7.116.1.41.3.3
The grand master UUID address of the PTP clock.
OBJECT-TYPE    
  MacAddress  

parentUuidv1 1.3.6.1.4.1.8691.7.116.1.41.3.4
The parent master UUID address of the PTP clock.
OBJECT-TYPE    
  MacAddress  

clockStratumv1 1.3.6.1.4.1.8691.7.116.1.41.3.5
The clock stratum of the PTP clock.
OBJECT-TYPE    
  INTEGER  

clockIdentifierv1 1.3.6.1.4.1.8691.7.116.1.41.3.6
The clock identifier of the PTP clock.
OBJECT-TYPE    
  DisplayString  

ptpv2Status 1.3.6.1.4.1.8691.7.116.1.41.4
OBJECT IDENTIFIER    

offsetToMaster 1.3.6.1.4.1.8691.7.116.1.41.4.1
The offset to master for nsec.
OBJECT-TYPE    
  INTEGER  

meanPathDelay 1.3.6.1.4.1.8691.7.116.1.41.4.2
The mean path delay of the PTP clock.
OBJECT-TYPE    
  INTEGER  

parentIdentity 1.3.6.1.4.1.8691.7.116.1.41.4.3
The parent identity of the PTP clock.
OBJECT-TYPE    
  DisplayString  

grandmasterIdentity 1.3.6.1.4.1.8691.7.116.1.41.4.4
The grandmaster identity of the PTP clock.
OBJECT-TYPE    
  DisplayString  

grandmasterClockClass 1.3.6.1.4.1.8691.7.116.1.41.4.5
The grandmaster clockClass of the PTP clock.
OBJECT-TYPE    
  INTEGER  

grandmasterClockAccuracy 1.3.6.1.4.1.8691.7.116.1.41.4.6
The grandmaster clockAccuracy of the PTP clock.
OBJECT-TYPE    
  INTEGER  

grandmasterPriority1 1.3.6.1.4.1.8691.7.116.1.41.4.7
The grandmaster priority1 of the PTP clock.
OBJECT-TYPE    
  INTEGER  

grandmasterPriority2 1.3.6.1.4.1.8691.7.116.1.41.4.8
The grandmaster priority2 of the PTP clock.
OBJECT-TYPE    
  INTEGER  

stepsRemoved 1.3.6.1.4.1.8691.7.116.1.41.4.9
The steps removed of the PTP clock.
OBJECT-TYPE    
  INTEGER  

currentUtcOffset 1.3.6.1.4.1.8691.7.116.1.41.4.10
The current utc offset of the PTP clock.
OBJECT-TYPE    
  INTEGER  

currentUtcOffsetValid 1.3.6.1.4.1.8691.7.116.1.41.4.11
The current utc offset valid flag of the PTP clock.
OBJECT-TYPE    
  DisplayString  

leap59 1.3.6.1.4.1.8691.7.116.1.41.4.12
The leap59 of the PTP clock.
OBJECT-TYPE    
  DisplayString  

leap61 1.3.6.1.4.1.8691.7.116.1.41.4.13
The leap61 of the PTP clock.
OBJECT-TYPE    
  DisplayString  

ptpTimescale 1.3.6.1.4.1.8691.7.116.1.41.4.14
The ptp timescale of the PTP clock.
OBJECT-TYPE    
  DisplayString  

timesource 1.3.6.1.4.1.8691.7.116.1.41.4.15
The timesource of the PTP clock.
OBJECT-TYPE    
  DisplayString  

ptpPortTable 1.3.6.1.4.1.8691.7.116.1.41.5
The ptp port table.
OBJECT-TYPE    
  SEQUENCE OF  
    PtpPortEntry

ptpPortEntry 1.3.6.1.4.1.8691.7.116.1.41.5.1
The ptp port entry.
OBJECT-TYPE    
  PtpPortEntry  

ptpPortIndex 1.3.6.1.4.1.8691.7.116.1.41.5.1.1
The ptp port index.
OBJECT-TYPE    
  INTEGER  

ptpPortEnable 1.3.6.1.4.1.8691.7.116.1.41.5.1.2
This enable the ptp port.
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

ptpPortStatus 1.3.6.1.4.1.8691.7.116.1.41.5.1.3
This port status of the PTP clock.
OBJECT-TYPE    
  INTEGER ptpInitializing(0), ptpFaulty(1), ptpDisabled(2), ptpListening(3), ptpPreMaster(4), ptpMaster(5), ptpPassive(6), ptpUncalibrated(7), ptpSlave(8)  

mibNotificationsPrefix 1.3.6.1.4.1.8691.7.116.0
OBJECT IDENTIFIER    

varconfigChangeTrap 1.3.6.1.4.1.8691.7.116.2.1
The configuration has been changed.
OBJECT-TYPE    
  INTEGER none(1), configChanged(2)  

configChangeTrap 1.3.6.1.4.1.8691.7.116.0.1
The configuration has been changed.
NOTIFICATION-TYPE    

varpower1Trap 1.3.6.1.4.1.8691.7.116.2.2
The power on/off changed.
OBJECT-TYPE    
  INTEGER none(1), on2off(2), off2on(3)  

power1Trap 1.3.6.1.4.1.8691.7.116.0.2
The power on/off changed.
NOTIFICATION-TYPE    

varpower2Trap 1.3.6.1.4.1.8691.7.116.2.3
The power on/off changed.
OBJECT-TYPE    
  INTEGER none(1), on2off(2), off2on(3)  

power2Trap 1.3.6.1.4.1.8691.7.116.0.3
The power on/off changed.
NOTIFICATION-TYPE    

vartrafficOverloadTrap 1.3.6.1.4.1.8691.7.116.2.4
The ethernet port's traffic loading exceeds the pre-defined value.
OBJECT-TYPE    
  INTEGER  

trafficOverloadTrap 1.3.6.1.4.1.8691.7.116.0.4
The ethernet port's traffic loading exceeds the pre-defined value.
NOTIFICATION-TYPE    

varredundancyTopologyChangedTrap 1.3.6.1.4.1.8691.7.116.2.5
The redundancy topology has been changed.
OBJECT-TYPE    
  INTEGER none(1), topologyChanged(2), topologyChangedTurboChainHead(3), topologyChangedTurboChainTail(4)  

redundancyTopologyChangedTrap 1.3.6.1.4.1.8691.7.116.0.5
The redundancy topology has been changed.
NOTIFICATION-TYPE    

varturboRingCouplingPortChangedTrap 1.3.6.1.4.1.8691.7.116.2.6
The coupling path of Turbo Ring has been changed.
OBJECT-TYPE    
  INTEGER none(1), couplingPortChanged(2)  

turboRingCouplingPortChangedTrap 1.3.6.1.4.1.8691.7.116.0.6
The coupling path of Turbo Ring has been changed.
NOTIFICATION-TYPE    

varturboRingMasterChangedTrap 1.3.6.1.4.1.8691.7.116.2.7
The master of Turbo Ring has been changed.
OBJECT-TYPE    
  INTEGER none(1), ringMasterChanged(2)  

turboRingMasterChangedTrap 1.3.6.1.4.1.8691.7.116.0.7
The master of Turbo Ring has been changed.
NOTIFICATION-TYPE    

varusbWarningTrap 1.3.6.1.4.1.8691.7.116.2.20
USB warning trap event.
OBJECT-TYPE    
  INTEGER noEnoughSpace(1), unauthDevice(2), exportConfigFail(3), exportLogFail(4), autoImportFail(5), isAttached(6), isDetached(7)  

usbWarningTrap 1.3.6.1.4.1.8691.7.116.0.20
USB warning trap event.
NOTIFICATION-TYPE    

varturboRingMasterMismatchTrap 1.3.6.1.4.1.8691.7.116.2.22
The master of Turbo Ring has been mismatch.
OBJECT-TYPE    
  INTEGER none(1), ringMasterMismatch(2)  

turboRingMasterMismatchTrap 1.3.6.1.4.1.8691.7.116.0.22
The master of Turbo Ring has been mismatch.
NOTIFICATION-TYPE    

varPortLoopDetectedTrap 1.3.6.1.4.1.8691.7.116.2.17
The DUT port is looping.
OBJECT-TYPE    
  INTEGER  

portLoopDetectedTrap 1.3.6.1.4.1.8691.7.116.0.17
The DUT port is looping.
NOTIFICATION-TYPE    

varRateLimitedOnTrap 1.3.6.1.4.1.8691.7.116.2.18
The DUT port is rate limit.
OBJECT-TYPE    
  INTEGER none(1), rateLimitON(2), rateLimitOFF(3)  

rateLimitedOnTrap 1.3.6.1.4.1.8691.7.116.0.18
The DUT port rate limit is ON.
NOTIFICATION-TYPE    

varLLDPChgTrap 1.3.6.1.4.1.8691.7.116.2.19
The LLDP table is changing.
OBJECT-TYPE    
  INTEGER  

lldpChgTrap 1.3.6.1.4.1.8691.7.116.0.19
The LLDP table is changing.
NOTIFICATION-TYPE    

varPoEWarningTrap 1.3.6.1.4.1.8691.7.116.2.16
The POE warning message.
OBJECT-TYPE    
  INTEGER pdOverCurrent(1), pdCheckFail(2), pdPowerOn(3), pdPowerOff(4), exceedSystemThreshold(5), pseFetBad(6), pseOverTemperature(7), pseVeeUvlo(8), exceedSystemPowerBudget(9)  

poeWarningTrap 1.3.6.1.4.1.8691.7.116.0.16
The POE warning message.
NOTIFICATION-TYPE    

diagnosis 1.3.6.1.4.1.8691.7.116.1.42
OBJECT IDENTIFIER    

lldpSetting 1.3.6.1.4.1.8691.7.116.1.42.1
OBJECT IDENTIFIER    

enableLLDP 1.3.6.1.4.1.8691.7.116.1.42.1.1
This enable the LLDP functon.
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

lldpMSGInterval 1.3.6.1.4.1.8691.7.116.1.42.1.2
The LLDP message transmit interval.
OBJECT-TYPE    
  INTEGER  

industrialProtocol 1.3.6.1.4.1.8691.7.116.1.47
OBJECT IDENTIFIER    

eipSetting 1.3.6.1.4.1.8691.7.116.1.47.1
OBJECT IDENTIFIER    

modbusTCPSetting 1.3.6.1.4.1.8691.7.116.1.47.2
OBJECT IDENTIFIER    

profinetioSetting 1.3.6.1.4.1.8691.7.116.1.47.3
OBJECT IDENTIFIER    

enableEtherNetIP 1.3.6.1.4.1.8691.7.116.1.47.1.1
This enable the EtherNet/IP functon.
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

enableModbusTCP 1.3.6.1.4.1.8691.7.116.1.47.2.1
This enable the Modbus TCP functon.
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

enableProfinetIO 1.3.6.1.4.1.8691.7.116.1.47.3.1
This enable the PROFINET IO functon.
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

garpSetting 1.3.6.1.4.1.8691.7.116.1.45
OBJECT IDENTIFIER    

leaveAllTime 1.3.6.1.4.1.8691.7.116.1.45.3
Leaveall Time (ms).
OBJECT-TYPE    
  INTEGER  

leaveTime 1.3.6.1.4.1.8691.7.116.1.45.2
Leave Time (ms).
OBJECT-TYPE    
  INTEGER  

joinTime 1.3.6.1.4.1.8691.7.116.1.45.1
Join Time (ms).
OBJECT-TYPE    
  INTEGER  

enableFactoryDefault 1.3.6.1.4.1.8691.7.116.1.48
Reset all EtherDevice switch settings to factory default values
OBJECT-TYPE    
  INTEGER activate(1)  

eventlog 1.3.6.1.4.1.8691.7.116.1.46
OBJECT IDENTIFIER    

eventlogTable 1.3.6.1.4.1.8691.7.116.1.46.1
The table of eventlog.
OBJECT-TYPE    
  SEQUENCE OF  
    EventlogEntry

eventlogEntry 1.3.6.1.4.1.8691.7.116.1.46.1.1
The table entry of eventlog.
OBJECT-TYPE    
  EventlogEntry  

eventlogIndex 1.3.6.1.4.1.8691.7.116.1.46.1.1.1
The index of eventlog entry.
OBJECT-TYPE    
  INTEGER  

eventlogBootup 1.3.6.1.4.1.8691.7.116.1.46.1.1.2
The reboot count of the system.
OBJECT-TYPE    
  INTEGER  

eventlogDate 1.3.6.1.4.1.8691.7.116.1.46.1.1.3
The date of the event occured.
OBJECT-TYPE    
  DisplayString  

eventlogTime 1.3.6.1.4.1.8691.7.116.1.46.1.1.4
The time of the event occured.
OBJECT-TYPE    
  DisplayString  

eventlogUptime 1.3.6.1.4.1.8691.7.116.1.46.1.1.5
The time of the event occured after booting up.
OBJECT-TYPE    
  DisplayString  

eventlogEvent 1.3.6.1.4.1.8691.7.116.1.46.1.1.6
The event which occured in the system.
OBJECT-TYPE    
  DisplayString  

eventlogClear 1.3.6.1.4.1.8691.7.116.1.46.2
To clear the eventlog, set value 1 to this field.
OBJECT-TYPE    
  INTEGER noop(0), clear(1)  

cpuLoading5s 1.3.6.1.4.1.8691.7.116.1.53
CPU Loading for the past 5 seconds in %.
OBJECT-TYPE    
  INTEGER  

cpuLoading30s 1.3.6.1.4.1.8691.7.116.1.54
CPU Loading for the past 30 seconds in %.
OBJECT-TYPE    
  INTEGER  

cpuLoading300s 1.3.6.1.4.1.8691.7.116.1.55
CPU Loading for the past 5 minutes in %.
OBJECT-TYPE    
  INTEGER  

totalMemory 1.3.6.1.4.1.8691.7.116.1.56
Total size of System RAM.
OBJECT-TYPE    
  INTEGER  

freeMemory 1.3.6.1.4.1.8691.7.116.1.57
Total size of free dynamic memory
OBJECT-TYPE    
  INTEGER  

usedMemory 1.3.6.1.4.1.8691.7.116.1.58
Total size of used dynamic memory
OBJECT-TYPE    
  INTEGER  

memoryUsage 1.3.6.1.4.1.8691.7.116.1.59
The usage of memory size in %.
OBJECT-TYPE    
  INTEGER  

loopProtection 1.3.6.1.4.1.8691.7.116.1.61
This enable the Loop Protection functon.
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

eventSettings 1.3.6.1.4.1.8691.7.116.1.62
OBJECT IDENTIFIER    

systemEventSettingsTable 1.3.6.1.4.1.8691.7.116.1.62.1
The system event settings table.
OBJECT-TYPE    
  SEQUENCE OF  
    SystemEventSettingsEntry

systemEventSettingsEntry 1.3.6.1.4.1.8691.7.116.1.62.1.1
System Event Settings Entry.
OBJECT-TYPE    
  SystemEventSettingsEntry  

systemEventIndex 1.3.6.1.4.1.8691.7.116.1.62.1.1.1
Index of system event settings
OBJECT-TYPE    
  INTEGER  

systemEventActive 1.3.6.1.4.1.8691.7.116.1.62.1.1.2
Status of active of system event settings
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

systemEventName 1.3.6.1.4.1.8691.7.116.1.62.1.1.3
Name of system event settings
OBJECT-TYPE    
  DisplayString  

systemEventSupport 1.3.6.1.4.1.8691.7.116.1.62.1.1.4
Status of support modules of system event settings.
OBJECT-TYPE    
  INTEGER none(0), support-SNMPTrap-only(1), support-Email-only(2), support-SNMP-Trap-Email(3), support-Syslog-only(4), support-SNMPTrap-Syslog(5), support-Email-Syslog(6), support-SNMPTrap-Email-Syslog(7), support-Relay1-only(8), support-SNMPTrap-Relay1(9), support-Email-Relay1(10), support-SNMPTrap-Email-Relay1(11), support-Syslog-Relay1(12), support-SNMPTrap-Syslog-Relay1(13), support-Email-Syslog-Relay1(14), support-SNMPTrap-Email-Syslog-Relay1(15), support-Relay2-only(16), support-SNMPTrap-Relay2(17), support-Email-Relay2(18), support-SNMPTrap-Email-Relay2(19), support-Syslog-Relay2(20), support-SNMPTrap-Syslog-Relay2(21), support-Email-Syslog-Relay2(22), support-SNMPTrap-Email-Syslog-Relay2(23), support-Relay1-Relay2(24), support-SNMPTrap-Relay1-Relay2(25), support-Syslog-Relay1-Relay2(28), support-Email-Syslog-Relay1-Relay2(30), support-all-SNMPTrap-Email-Syslog-Relay1-Relay2(31)  

systemEventModuleEnable 1.3.6.1.4.1.8691.7.116.1.62.1.1.5
Status of enable of system event settings.
OBJECT-TYPE    
  INTEGER none(0), enable-SNMPTrap-only(1), enable-Email-only(2), enable-SNMPTrap-Email(3), enable-Syslog-only(4), enable-SNMPTrap-Syslog(5), enable-Email-Syslog(6), enable-SNMPTrap-Email-Syslog(7), enable-Relay1-only(8), enable-SNMPTrap-Relay1(9), enable-Email-Relay1(10), enable-SNMPTrap-Email-Relay1(11), enable-Syslog-Relay1(12), enable-SNMPTrap-Syslog-Relay1(13), enable-Email-Syslog-Relay1(14), enable-SNMPTrap-Email-Syslog-Relay1(15), enable-Relay2-only(16), enable-SNMPTrap-Relay2(17), enable-Email-Relay2(18), enable-SNMPTrap-Email-Relay2(19), enable-Syslog-Relay2(20), enable-SNMPTrap-Syslog-Relay2(21), enable-Email-Syslog-Relay2(22), enable-SNMPTrap-Email-Syslog-Relay2(23), enable-Relay1-Relay2(24), enable-SNMPTrap-Relay1-Relay2(25), enable-Syslog-Relay1-Relay2(28), enable-Email-Syslog-Relay1-Relay2(30), enable-All-SNMPTrap-Email-Syslog-Relay1-Relay2(31)  

systemEventSeverity 1.3.6.1.4.1.8691.7.116.1.62.1.1.6
Severity of system event settings
OBJECT-TYPE    
  INTEGER emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), information(6), debug(7)  

portEventSettingsTable 1.3.6.1.4.1.8691.7.116.1.62.2
The port event settings table.
OBJECT-TYPE    
  SEQUENCE OF  
    PortEventSettingsEntry

portEventSettingsEntry 1.3.6.1.4.1.8691.7.116.1.62.2.1
Port Event Settings Entry.
OBJECT-TYPE    
  PortEventSettingsEntry  

portEventIndex 1.3.6.1.4.1.8691.7.116.1.62.2.1.1
Index of port event settings
OBJECT-TYPE    
  INTEGER  

portEventLabel 1.3.6.1.4.1.8691.7.116.1.62.2.1.2
Label of portEventIndex
OBJECT-TYPE    
  DisplayString  

portEventActive 1.3.6.1.4.1.8691.7.116.1.62.2.1.3
Status of active of port event settings
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

portEventEnable 1.3.6.1.4.1.8691.7.116.1.62.2.1.4
Status of event enable of port event settings
OBJECT-TYPE    
  INTEGER none(0), enable-LinkOn-only(1), enable-LinkOff-only(2), enable-LinkOn-LinkOff(3), enable-TrafficOverload-only(4), enable-LinkOn-TrafficOverload(5), enable-LinkOff-TrafficOverload(6), enable-All-LinkOn-LinkOff-TrafficOverload(7)  

portEventTrafficThreshold 1.3.6.1.4.1.8691.7.116.1.62.2.1.5
Threshold of Traffic-Overload in percentage(%)
OBJECT-TYPE    
  INTEGER 0..100  

portEventTrafficDuration 1.3.6.1.4.1.8691.7.116.1.62.2.1.6
Duration of Traffic-Overload in secs(s)
OBJECT-TYPE    
  INTEGER 1..300  

portEventModuleEnable 1.3.6.1.4.1.8691.7.116.1.62.2.1.7
Status of module enable of port event settings.
OBJECT-TYPE    
  INTEGER none(0), enable-SNMPTrap-only(1), enable-Email-only(2), enable-SNMPTrap-Email(3), enable-Syslog-only(4), enable-SNMPTrap-Syslog(5), enable-Email-Syslog(6), enable-SNMPTrap-Email-Syslog(7), enable-Relay1-only(8), enable-SNMPTrap-Relay1(9), enable-Email-Relay1(10), enable-SNMPTrap-Email-Relay1(11), enable-Syslog-Relay1(12), enable-SNMPTrap-Syslog-Relay1(13), enable-Email-Syslog-Relay1(14), enable-SNMPTrap-Email-Syslog-Relay1(15), enable-Relay2-only(16), enable-SNMPTrap-Relay2(17), enable-Email-Relay2(18), enable-SNMPTrap-Email-Relay2(19), enable-Syslog-Relay2(20), enable-SNMPTrap-Syslog-Relay2(21), enable-Email-Syslog-Relay2(22), enable-SNMPTrap-Email-Syslog-Relay2(23), enable-Relay1-Relay2(24), enable-SNMPTrap-Relay1-Relay2(25), enable-Syslog-Relay1-Relay2(28), enable-Email-Syslog-Relay1-Relay2(30), enable-All-SNMPTrap-Email-Syslog-Relay1-Relay2(31)  

portEventSeverity 1.3.6.1.4.1.8691.7.116.1.62.2.1.8
Severity of port event settings
OBJECT-TYPE    
  INTEGER emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), information(6), debug(7)  

managementInterface 1.3.6.1.4.1.8691.7.116.1.63
OBJECT IDENTIFIER    

httpEnable 1.3.6.1.4.1.8691.7.116.1.63.1
Status of http service
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

httpPort 1.3.6.1.4.1.8691.7.116.1.63.2
Port of http service
OBJECT-TYPE    
  INTEGER 1..65535  

sslEnable 1.3.6.1.4.1.8691.7.116.1.63.3
Status of ssl(https) service
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sslPort 1.3.6.1.4.1.8691.7.116.1.63.4
Port of ssl(https) service
OBJECT-TYPE    
  INTEGER 1..65535  

telnetEnable 1.3.6.1.4.1.8691.7.116.1.63.5
Status of telnet service
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

telnetPort 1.3.6.1.4.1.8691.7.116.1.63.6
Port of telnet service
OBJECT-TYPE    
  INTEGER 1..65535  

sshEnable 1.3.6.1.4.1.8691.7.116.1.63.7
Status of ssh service
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sshPort 1.3.6.1.4.1.8691.7.116.1.63.8
Port of telnet service
OBJECT-TYPE    
  INTEGER 1..65535  

webTimeout 1.3.6.1.4.1.8691.7.116.1.63.9
Web Timeout (Mins). Set 0 to disable
OBJECT-TYPE    
  INTEGER 0..1440  

switchLocator 1.3.6.1.4.1.8691.7.116.1.64
OBJECT IDENTIFIER    

blinkingLocatorLED 1.3.6.1.4.1.8691.7.116.1.64.1
Blinking switch locator LED.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

disableLocatorLEDTime 1.3.6.1.4.1.8691.7.116.1.64.2
Configure back-off time for disable switch locator LED.
OBJECT-TYPE    
  INTEGER  

uiVersion 1.3.6.1.4.1.8691.7.116.1.65
New UI Version
OBJECT-TYPE    
  INTEGER