MGUARDB-MIB

File: MGUARDB-MIB.mib (215463 bytes)

Imported modules

RFC1155-SMI RFC-1212 SNMPv2-TC
RFC1213-MIB RFC-1215

Imported symbols

enterprises IpAddress OBJECT-TYPE
RowStatus TruthValue MacAddress
DisplayString TRAP-TYPE

Defined Types

MGuardVPNConnectionEntry  
SEQUENCE    
  mGuardVPNconIndex INTEGER
  mGuardVPNconName DisplayString
  mGuardVPNconEnabled INTEGER
  mGuardVPNremGW DisplayString
  mGuardVPNconType INTEGER
  mGuardVPNlocalNet IpAddress
  mGuardVPNlocalMask IpAddress
  mGuardVPNremoteNet IpAddress
  mGuardVPNremoteMask IpAddress
  mGuardVPNauthType INTEGER
  mGuardVPNpsk DisplayString
  mGuardVPNx509 DisplayString
  mGuardVPNikeDH INTEGER
  mGuardVPNikeHash INTEGER
  mGuardVPNipsecHash INTEGER
  mGuardVPNikeAlg INTEGER
  mGuardVPNipsecAlg INTEGER
  mGuardVPNpfs INTEGER
  mGuardVPNconStartUp INTEGER
  mGuardVPNvirtIPMethod INTEGER
  mGuardVPNvirtIP IpAddress
  mGuardVPNFWLogDefIn INTEGER
  mGuardVPNFWLogDefOut INTEGER
  mGuardVPNProtoAH INTEGER
  mGuardVPNProtoESP INTEGER
  mGuardVPNComp INTEGER
  mGuardVPNLocalIDMode INTEGER
  mGuardVPNLocalID DisplayString
  mGuardVPNRemoteIDMode INTEGER
  mGuardVPNRemoteID DisplayString
  mGuardVPNIkeLifetime INTEGER
  mGuardVPNIpsecLifetime INTEGER
  mGuardVPNRekeyMargin INTEGER
  mGuardVPNRekeyFuzz INTEGER
  mGuardVPNKeyingTries INTEGER
  mGuardVPNRekey INTEGER
  mGuardVPNDPDAction INTEGER
  mGuardVPNDPDDelay INTEGER
  mGuardVPNDPDTimeout INTEGER
  mGuardVPNRowStatus RowStatus
  mGuardVPNAggressive INTEGER
  mGuardVPNlocal DisplayString
  mGuardVPNremote DisplayString

MGuardVPNFWINEntry  
SEQUENCE    
  mGuardVPNFWINconIndex INTEGER
  mGuardVPNFWINruleIndex INTEGER
  mGuardVPNFWINsourceIP DisplayString
  mGuardVPNFWINdestinationIP DisplayString
  mGuardVPNFWINsport DisplayString
  mGuardVPNFWINdport DisplayString
  mGuardVPNFWINtarget INTEGER
  mGuardVPNFWINproto INTEGER
  mGuardVPNFWINlog INTEGER
  mGuardVPNFWINRowStatus RowStatus
  mGuardVPNFWINcomment DisplayString

MGuardVPNFWOUTEntry  
SEQUENCE    
  mGuardVPNFWOUTconIndex INTEGER
  mGuardVPNFWOUTruleIndex INTEGER
  mGuardVPNFWOUTsourceIP DisplayString
  mGuardVPNFWOUTdestinationIP DisplayString
  mGuardVPNFWOUTsport DisplayString
  mGuardVPNFWOUTdport DisplayString
  mGuardVPNFWOUTtarget INTEGER
  mGuardVPNFWOUTproto INTEGER
  mGuardVPNFWOUTlog INTEGER
  mGuardVPNFWOUTRowStatus RowStatus
  mGuardVPNFWOUTcomment DisplayString

MGuardVPNL2TPpppdOptEntry  
SEQUENCE    
  mGuardVPNL2TPpppdOptIndex INTEGER
  mGuardVPNL2TPpppdOptValue DisplayString
  mGuardVPNL2TPpppdOptRowStatus RowStatus

MGuardFirewallIncomingEntry  
SEQUENCE    
  mGuardFWINruleIndex INTEGER
  mGuardFWINsourceIP DisplayString
  mGuardFWINdestinationIP DisplayString
  mGuardFWINsport DisplayString
  mGuardFWINdport DisplayString
  mGuardFWINtarget INTEGER
  mGuardFWINproto INTEGER
  mGuardFWINlog INTEGER
  mGuardFWINRowStatus RowStatus
  mGuardFWINcomment DisplayString

MGuardFirewallOutgoingEntry  
SEQUENCE    
  mGuardFWOUTruleIndex INTEGER
  mGuardFWOUTsourceIP DisplayString
  mGuardFWOUTdestinationIP DisplayString
  mGuardFWOUTsport DisplayString
  mGuardFWOUTdport DisplayString
  mGuardFWOUTtarget INTEGER
  mGuardFWOUTproto INTEGER
  mGuardFWOUTlog INTEGER
  mGuardFWOUTRowStatus RowStatus
  mGuardFWOUTcomment DisplayString

MGuardFirewallPortforwardEntry  
SEQUENCE    
  mGuardFWPORTFORWruleIndex INTEGER
  mGuardFWPORTFORWinIP DisplayString
  mGuardFWPORTFORWoutIP DisplayString
  mGuardFWPORTFORWinport DisplayString
  mGuardFWPORTFORWoutport DisplayString
  mGuardFWPORTFORWproto INTEGER
  mGuardFWPORTFORWlog INTEGER
  mGuardFWPORTFORWRowStatus RowStatus
  mGuardFWPORTFORWsrcIP DisplayString
  mGuardFWPORTFORWsrcport DisplayString
  mGuardFWPORTFORWcomment DisplayString

MGuardFirewallNATRuleEntry  
SEQUENCE    
  mGuardFWNATruleIndex INTEGER
  mGuardFWNATIP DisplayString
  mGuardFWNATRowStatus RowStatus
  mGuardFWNATOutIP DisplayString

MGuardFirewall11NATRuleEntry  
SEQUENCE    
  mGuardFW11NATruleIndex INTEGER
  mGuardFW11NATLocal IpAddress
  mGuardFW11NATRemote IpAddress
  mGuardFW11NATMask INTEGER
  mGuardFW11NATLog INTEGER
  mGuardFW11NATRowStatus RowStatus

MGuardFirewallUserFWTemplateEntry  
SEQUENCE    
  mGuardFirewallUserFWTemplateIndex INTEGER
  mGuardFirewallUserFWTemplateEnabled INTEGER
  mGuardFirewallUserFWTemplateName DisplayString
  mGuardFirewallUserFWTemplateComment DisplayString
  mGuardFirewallUserFWTemplateTimeout INTEGER
  mGuardFirewallUserFWTemplateSrcIP DisplayString
  mGuardFirewallUserFWTemplateRowStatus RowStatus

MGuardFirewallUserFWTemplateUserEntry  
SEQUENCE    
  mGuardFirewallUserFWTemplateUserTemplateIndex INTEGER
  mGuardFirewallUserFWTemplateUserIndex INTEGER
  mGuardFirewallUserFWTemplateUserName DisplayString
  mGuardFirewallUserFWTemplateUserRowStatus RowStatus

MGuardFirewallUserFWTemplateRuleEntry  
SEQUENCE    
  mGuardFirewallUserFWTemplateRuleTemplateIndex INTEGER
  mGuardFirewallUserFWTemplateRuleIndex INTEGER
  mGuardFirewallUserFWTemplateRuleProto INTEGER
  mGuardFirewallUserFWTemplateRuleSrcPort DisplayString
  mGuardFirewallUserFWTemplateRuleDstPort DisplayString
  mGuardFirewallUserFWTemplateRuleDstIP DisplayString
  mGuardFirewallUserFWTemplateRuleLog INTEGER
  mGuardFirewallUserFWTemplateRuleComment DisplayString
  mGuardFirewallUserFWTemplateRuleRowStatus RowStatus

MGuardL2FilterInternEntry  
SEQUENCE    
  mGuardL2FilterInternRuleIndex INTEGER
  mGuardL2FilterInternRowStatus RowStatus
  mGuardL2FilterInternSrcMac MacAddress
  mGuardL2FilterInternDstMac MacAddress
  mGuardL2FilterInternEthType INTEGER
  mGuardL2FilterInternTarget INTEGER
  mGuardL2FilterInternComment DisplayString

MGuardL2FilterExternEntry  
SEQUENCE    
  mGuardL2FilterExternRuleIndex INTEGER
  mGuardL2FilterExternRowStatus RowStatus
  mGuardL2FilterExternSrcMac MacAddress
  mGuardL2FilterExternDstMac MacAddress
  mGuardL2FilterExternEthType INTEGER
  mGuardL2FilterExternTarget INTEGER
  mGuardL2FilterExternComment DisplayString

MGuardRouterLocalAliasesEntry  
SEQUENCE    
  mGuardLocalAliasIndex INTEGER
  mGuardLocalAliasIpAddress IpAddress
  mGuardLocalAliasNetmask IpAddress
  mGuardLocalAliasRowStatus RowStatus
  mGuardLocalAliasUseVLAN INTEGER
  mGuardLocalAliasVLANid INTEGER

MGuardLocalRoutesEntry  
SEQUENCE    
  mGuardLocalRouteIndex INTEGER
  mGuardLocalRouteNetwork DisplayString
  mGuardLocalRouteGateway IpAddress
  mGuardLocalRouteRowStatus RowStatus

MGuardRouterExternAliasesEntry  
SEQUENCE    
  mGuardExternAliasIndex INTEGER
  mGuardExternAliasIpAddress IpAddress
  mGuardExternAliasNetmask IpAddress
  mGuardExternAliasRowStatus RowStatus
  mGuardExternAliasUseVLAN INTEGER
  mGuardExternAliasVLANid INTEGER

MGuardExternRoutesEntry  
SEQUENCE    
  mGuardExternRouteIndex INTEGER
  mGuardExternRouteNetwork DisplayString
  mGuardExternRouteGateway IpAddress
  mGuardExternRouteRowStatus RowStatus

MGuardPPPOEpppdOptionsEntry  
SEQUENCE    
  mGuardPPPOEpppdOptionsIndex INTEGER
  mGuardPPPOEpppdOptionsValue DisplayString
  mGuardPPPOEpppdOptionsRowStatus RowStatus

MGuardDHCPIntStaticEntry  
SEQUENCE    
  mGuardDHCPIntStaticIndex INTEGER
  mGuardDHCPIntStaticMAC MacAddress
  mGuardDHCPIntStaticIP IpAddress
  mGuardDHCPIntStaticRowStatus RowStatus

MGuardDHCPIntRelayServerEntry  
SEQUENCE    
  mGuardDHCPIntRelayServerIndex INTEGER
  mGuardDHCPIntRelayServerIP IpAddress
  mGuardDHCPIntRelayRowStatus RowStatus

MGuardDHCPExtStaticEntry  
SEQUENCE    
  mGuardDHCPExtStaticIndex INTEGER
  mGuardDHCPExtStaticMAC MacAddress
  mGuardDHCPExtStaticIP IpAddress
  mGuardDHCPExtStaticRowStatus RowStatus

MGuardDHCPExtRelayServerEntry  
SEQUENCE    
  mGuardDHCPExtRelayServerIndex INTEGER
  mGuardDHCPExtRelayServerIP IpAddress
  mGuardDHCPExtRelayRowStatus RowStatus

MGuardDNSUserDefinedServerEntry  
SEQUENCE    
  mGuarddnsServerIndex INTEGER
  mGuarddnsServerIP IpAddress
  mGuarddnsServerRowStatus RowStatus

MGuardPPTPpppdOptionsEntry  
SEQUENCE    
  mGuardPPTPpppdOptionsIndex INTEGER
  mGuardPPTPpppdOptionsValue DisplayString
  mGuardPPTPpppdOptionsRowStatus RowStatus

MGuardSerialPPPFWINEntry  
SEQUENCE    
  mGuardSerialPPPFWINruleIndex INTEGER
  mGuardSerialPPPFWINsourceIP DisplayString
  mGuardSerialPPPFWINdestinationIP DisplayString
  mGuardSerialPPPFWINsport DisplayString
  mGuardSerialPPPFWINdport DisplayString
  mGuardSerialPPPFWINtarget INTEGER
  mGuardSerialPPPFWINproto INTEGER
  mGuardSerialPPPFWINlog INTEGER
  mGuardSerialPPPFWINRowStatus RowStatus
  mGuardSerialPPPFWINcomment DisplayString

MGuardSerialPPPFWOUTEntry  
SEQUENCE    
  mGuardSerialPPPFWOUTruleIndex INTEGER
  mGuardSerialPPPFWOUTsourceIP DisplayString
  mGuardSerialPPPFWOUTtargetIP DisplayString
  mGuardSerialPPPFWOUTsport DisplayString
  mGuardSerialPPPFWOUTdport DisplayString
  mGuardSerialPPPFWOUTtarget INTEGER
  mGuardSerialPPPFWOUTproto INTEGER
  mGuardSerialPPPFWOUTlog INTEGER
  mGuardSerialPPPFWOUTRowStatus RowStatus
  mGuardSerialPPPFWOUTcomment DisplayString

MGuardHTTPSRemoteFWRuleEntry  
SEQUENCE    
  mGuardHTTPSFWruleIndex INTEGER
  mGuardHTTPSFWsourceIP DisplayString
  mGuardHTTPSFWinterface INTEGER
  mGuardHTTPSFWtarget INTEGER
  mGuardHTTPSFWlog INTEGER
  mGuardHTTPSFWRowStatus RowStatus
  mGuardHTTPSFWcomment DisplayString

MGuardSSHRemoteFWRuleEntry  
SEQUENCE    
  mGuardSSHFWruleIndex INTEGER
  mGuardSSHFWsourceIP DisplayString
  mGuardSSHFWinterface INTEGER
  mGuardSSHFWtarget INTEGER
  mGuardSSHFWlog INTEGER
  mGuardSSHFWRowStatus RowStatus
  mGuardSSHFWcomment DisplayString

MGuardPackageVersionEntry  
SEQUENCE    
  mGuardPkgIndex INTEGER
  mGuardPkgName DisplayString
  mGuardPkgVerNum DisplayString
  mGuardPkgVerVersion DisplayString
  mGuardPkgVerFlavour DisplayString

MGuardSNMPFWRuleEntry  
SEQUENCE    
  mGuardSNMPFWruleIndex INTEGER
  mGuardSNMPFWsourceIP DisplayString
  mGuardSNMPFWinterface INTEGER
  mGuardSNMPFWtarget INTEGER
  mGuardSNMPFWlog INTEGER
  mGuardSNMPFWRowStatus RowStatus
  mGuardSNMPFWcomment DisplayString

MGuardSNMPTrapReceiverEntry  
SEQUENCE    
  mGuardSNMPTrapReceiverIndex INTEGER
  mGuardSNMPTrapReceiverCommunity DisplayString Size(1..16)
  mGuardSNMPTrapReceiverIPAddress IpAddress
  mGuardSNMPTrapReceiverName DisplayString
  mGuardSNMPTrapReceiverRowStatus INTEGER

MGuardNTPServerEntry  
SEQUENCE    
  mGuardNTPServerIndex INTEGER
  mGuardNTPServerHost DisplayString
  mGuardNTPServerRowStatus RowStatus

MGuardUpdateServerEntry  
SEQUENCE    
  mGuardUpdateServerIndex INTEGER
  mGuardUpdateServer DisplayString
  mGuardUpdateServerRowStatus RowStatus
  mGuardUpdateServerProto DisplayString
  mGuardUpdateServerHost DisplayString
  mGuardUpdateServerLogin DisplayString
  mGuardUpdateServerPassword DisplayString

MGuardRouterRedExtHostCheckEntry  
SEQUENCE    
  mGuardRouterRedExtHostCheckIndex INTEGER
  mGuardRouterRedExtHostCheckIP IpAddress
  mGuardRouterRedExtHostCheckRowSt RowStatus

MGuardRouterRedIntHostCheckEntry  
SEQUENCE    
  mGuardRouterRedIntHostCheckIndex INTEGER
  mGuardRouterRedIntHostCheckIP IpAddress
  mGuardRouterRedIntHostCheckRowSt RowStatus

MguardPSEntry  
SEQUENCE    
  mGuardPSSysID INTEGER
  mGuardPSID INTEGER
  mGuardPSState INTEGER

MGuardContFiltAVPServerEntry  
SEQUENCE    
  mGuardContFiltAVPServerIndex INTEGER
  mGuardContFiltAVPServerURL DisplayString
  mGuardContFiltAVPServerRowStatus RowStatus

MGuardContFiltHTTPSrvrEntry  
SEQUENCE    
  mGuardContFiltHTTPSrvrIndex INTEGER
  mGuardContFiltHTTPSrvrIP DisplayString
  mGuardContFiltHTTPSrvrPort DisplayString
  mGuardContFiltHTTPSrvrScanAction INTEGER
  mGuardContFiltHTTPSrvrRowStatus RowStatus
  mGuardContFiltHTTPSrvrComment DisplayString

MGuardContFiltPOP3SrvrEntry  
SEQUENCE    
  mGuardContFiltPOP3SrvrIndex INTEGER
  mGuardContFiltPOP3SrvrIP DisplayString
  mGuardContFiltPOP3SrvrPort DisplayString
  mGuardContFiltPOP3SrvrScanAction INTEGER
  mGuardContFiltPOP3SrvrRowStatus RowStatus
  mGuardContFiltPOP3SrvrComment DisplayString

MGuardContFiltSMTPSrvrEntry  
SEQUENCE    
  mGuardContFiltSMTPSrvrIndex INTEGER
  mGuardContFiltSMTPSrvrIP DisplayString
  mGuardContFiltSMTPSrvrPort DisplayString
  mGuardContFiltSMTPSrvrScanAction INTEGER
  mGuardContFiltSMTPSrvrRowStatus RowStatus
  mGuardContFiltSMTPSrvrComment DisplayString

MGuardContFiltFTPSrvrEntry  
SEQUENCE    
  mGuardContFiltFTPSrvrIndex INTEGER
  mGuardContFiltFTPSrvrIP DisplayString
  mGuardContFiltFTPSrvrPort DisplayString
  mGuardContFiltFTPSrvrScanAction INTEGER
  mGuardContFiltFTPSrvrRowStatus RowStatus
  mGuardContFiltFTPSrvrComment DisplayString

MGuardBladeCtrlEntry  
SEQUENCE    
  mGuardBladeCtrlIndex INTEGER
  mGuardBladeCtrlDevice DisplayString
  mGuardBladeCtrlStatus INTEGER
  mGuardBladeCtrlAVRRevision DisplayString
  mGuardBladeCtrlSlotID DisplayString
  mGuardBladeCtrlProductID DisplayString
  mGuardBladeCtrlAssemblyID DisplayString
  mGuardBladeCtrlSerial DisplayString
  mGuardBladeCtrlFlashID DisplayString
  mGuardBladeCtrlVersion DisplayString
  mGuardBladeCtrlBackup INTEGER
  mGuardBladeCtrlRestore INTEGER

MGuardBladePwrEntry  
SEQUENCE    
  mGuardBladePwrIndex INTEGER
  mGuardBladePwrStatus INTEGER

MGuardRADIUSServerEntry  
SEQUENCE    
  mGuardRADIUSServerIndex INTEGER
  mGuardRADIUSServerHostname DisplayString
  mGuardRADIUSServerPort INTEGER
  mGuardRADIUSServerSecret DisplayString
  mGuardRADIUSServerRowStatus RowStatus

MGuardUserFWUserEntry  
SEQUENCE    
  mGuardUserFWUserIndex INTEGER
  mGuardUserFWUserName DisplayString
  mGuardUserFWUserAuthMethod INTEGER
  mGuardUserFWUserPassword DisplayString
  mGuardUserFWUserRowStatus RowStatus

Defined Values

innominate 1.3.6.1.4.1.15450
OBJECT IDENTIFIER    

mGuardb 1.3.6.1.4.1.15450.2
OBJECT IDENTIFIER    

mGuardVPN 1.3.6.1.4.1.15450.2.1
OBJECT IDENTIFIER    

mGuardFirewall 1.3.6.1.4.1.15450.2.2
OBJECT IDENTIFIER    

mGuardNetwork 1.3.6.1.4.1.15450.2.3
OBJECT IDENTIFIER    

mGuardSystem 1.3.6.1.4.1.15450.2.4
OBJECT IDENTIFIER    

mGuardSNMP 1.3.6.1.4.1.15450.2.5
OBJECT IDENTIFIER    

mGuardNTP 1.3.6.1.4.1.15450.2.6
OBJECT IDENTIFIER    

mGuardUpdate 1.3.6.1.4.1.15450.2.7
OBJECT IDENTIFIER    

mGuardRedundancy 1.3.6.1.4.1.15450.2.9
OBJECT IDENTIFIER    

mGuardInfo 1.3.6.1.4.1.15450.2.10
OBJECT IDENTIFIER    

mGuardLogging 1.3.6.1.4.1.15450.2.11
OBJECT IDENTIFIER    

mGuardContFilt 1.3.6.1.4.1.15450.2.12
OBJECT IDENTIFIER    

mGuardBlade 1.3.6.1.4.1.15450.2.13
OBJECT IDENTIFIER    

mGuardProfile 1.3.6.1.4.1.15450.2.14
OBJECT IDENTIFIER    

mGuardUsers 1.3.6.1.4.1.15450.2.15
OBJECT IDENTIFIER    

mGuardVPNMachine 1.3.6.1.4.1.15450.2.1.1
OBJECT IDENTIFIER    

mGuardVPNMachineCert 1.3.6.1.4.1.15450.2.1.1.1
Machine certificate and private key of this device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardVPNMachinePrivate 1.3.6.1.4.1.15450.2.1.1.2
Private key
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardVPNConnectionTable 1.3.6.1.4.1.15450.2.1.2
A table containing the configuration of the local device's VPN connections.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardVPNConnectionEntry

mGuardVPNConnectionEntry 1.3.6.1.4.1.15450.2.1.2.1
Configuration of a single VPN connection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardVPNConnectionEntry  

mGuardVPNconIndex 1.3.6.1.4.1.15450.2.1.2.1.1
Index to identify the connection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..250  

mGuardVPNconName 1.3.6.1.4.1.15450.2.1.2.1.2
Descriptive name of the connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardVPNconEnabled 1.3.6.1.4.1.15450.2.1.2.1.3
Is the connection enabled: yes / no .
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mGuardVPNremGW 1.3.6.1.4.1.15450.2.1.2.1.4
Remote VPN gateway.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardVPNconType 1.3.6.1.4.1.15450.2.1.2.1.5
Type of VPN connection: transport / tunnel / l2tp-w2k / l2tp-ssh
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER transport(1), tunnel(2), l2tp-w2k(3), l2tp-ssh(4)  

mGuardVPNlocalNet 1.3.6.1.4.1.15450.2.1.2.1.6
Local net address for VPN connection in tunnel mode.
Status: deprecated Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardVPNlocalMask 1.3.6.1.4.1.15450.2.1.2.1.7
Local netmask for VPN connection in tunnel mode.
Status: deprecated Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardVPNremoteNet 1.3.6.1.4.1.15450.2.1.2.1.8
Remote net address for VPN connection in tunnel mode.
Status: deprecated Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardVPNremoteMask 1.3.6.1.4.1.15450.2.1.2.1.9
Remote netmask for VPN connection in tunnel mode.
Status: deprecated Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardVPNauthType 1.3.6.1.4.1.15450.2.1.2.1.10
Authentification mode of the VPN connection: psk / x509
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER psk(1), x509(2)  

mGuardVPNpsk 1.3.6.1.4.1.15450.2.1.2.1.11
Pre Shared Secret
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardVPNx509 1.3.6.1.4.1.15450.2.1.2.1.12
X.509 certificate
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardVPNikeDH 1.3.6.1.4.1.15450.2.1.2.1.13
IKE DH algorithm.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER all(1), modp1024(2), modp1536(3), modp2048(4), modp3072(5), modp4096(6)  

mGuardVPNikeHash 1.3.6.1.4.1.15450.2.1.2.1.14
IKE hash algorithm: all / md5 / sha1
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER all(1), md5(2), sha1(3)  

mGuardVPNipsecHash 1.3.6.1.4.1.15450.2.1.2.1.15
ipsec hash algorithm: all / md5 / sha1
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER all(1), md5(2), sha1(3)  

mGuardVPNikeAlg 1.3.6.1.4.1.15450.2.1.2.1.16
IKE encryption algorithm: des / 3des168 / aes128 / aes192 / aes256
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER des(1), tripledes168(2), aes128(3), aes192(4), aes256(5)  

mGuardVPNipsecAlg 1.3.6.1.4.1.15450.2.1.2.1.17
ipsec encryption algorithm: des/ 3des168 / aes128 / aes192 / aes256 / null
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER des(1), tripledes168(2), aes128(3), aes192(4), aes256(5), null(6)  

mGuardVPNpfs 1.3.6.1.4.1.15450.2.1.2.1.18
ipsec perfect forward secrecy: no / all / modp1024 / modp1536 / modp2048 / modp3072 / modp4096
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), all(2), modp1024(3), modp1536(4), modp2048(5), modp3072(6), modp4096(7)  

mGuardVPNconStartUp 1.3.6.1.4.1.15450.2.1.2.1.19
Recognize the startup of the VPN connection or wait for connection startup of the remote gateway: yes / no .
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER initiate(1), waitForRemote(2)  

mGuardVPNvirtIPMethod 1.3.6.1.4.1.15450.2.1.2.1.20
This option isn't implemented yet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER static(1), dhcp-over-ipsec(2)  

mGuardVPNvirtIP 1.3.6.1.4.1.15450.2.1.2.1.21
Virtual IP to use
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardVPNFWLogDefIn 1.3.6.1.4.1.15450.2.1.2.1.22
Log entries for undefined incoming connection attemps ?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardVPNFWLogDefOut 1.3.6.1.4.1.15450.2.1.2.1.23
Log entries for undefined outgoing connection attemps ?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardVPNProtoAH 1.3.6.1.4.1.15450.2.1.2.1.26
Use the AH protocoll. Only 'no' is supported.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardVPNProtoESP 1.3.6.1.4.1.15450.2.1.2.1.27
Use the ESP protocoll. Only 'yes' is supported.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardVPNComp 1.3.6.1.4.1.15450.2.1.2.1.28
Use IPsec compression. Only 'no' is supported.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardVPNLocalIDMode 1.3.6.1.4.1.15450.2.1.2.1.29
Mode for local ID. This option isn't implemented yet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), freeswan(2)  

mGuardVPNLocalID 1.3.6.1.4.1.15450.2.1.2.1.30
Local ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardVPNRemoteIDMode 1.3.6.1.4.1.15450.2.1.2.1.31
Mode for remote ID. This option isn't implemented yet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), freeswan(2)  

mGuardVPNRemoteID 1.3.6.1.4.1.15450.2.1.2.1.32
Local ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardVPNIkeLifetime 1.3.6.1.4.1.15450.2.1.2.1.33
ISAKMP SA lifetime (seconds).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardVPNIpsecLifetime 1.3.6.1.4.1.15450.2.1.2.1.34
IPSec SA lifetime (seconds).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardVPNRekeyMargin 1.3.6.1.4.1.15450.2.1.2.1.35
Rekey Margin (seconds).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardVPNRekeyFuzz 1.3.6.1.4.1.15450.2.1.2.1.36
Rekey fuzz (in percent).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardVPNKeyingTries 1.3.6.1.4.1.15450.2.1.2.1.37
Rekey fuzz (in percent).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardVPNRekey 1.3.6.1.4.1.15450.2.1.2.1.38
Renegotiate connection after the keys have expired? Must be set to 'no' on both end to be effective.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardVPNDPDAction 1.3.6.1.4.1.15450.2.1.2.1.39
What to do in case DPD found out that the connection is dead: 'hold': renegotiate connection. 'clear': clear connection and don't renegotiate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER hold(1), clear(2)  

mGuardVPNDPDDelay 1.3.6.1.4.1.15450.2.1.2.1.40
Interval in seconds to wait before sending DPD requests when the remote end didn't send data. The default value is 30.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardVPNDPDTimeout 1.3.6.1.4.1.15450.2.1.2.1.41
Interval in seconds before declaring the remote end as dead after sending the first DPD request. The default value is 120.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardVPNRowStatus 1.3.6.1.4.1.15450.2.1.2.1.42
RowStatus
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardVPNAggressive 1.3.6.1.4.1.15450.2.1.2.1.43
Wether to use/accept aggressive mode VPn connections for this one.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

mGuardVPNlocal 1.3.6.1.4.1.15450.2.1.2.1.44
Local network for VPN connection in tunnel mode in CIDR notation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardVPNremote 1.3.6.1.4.1.15450.2.1.2.1.45
Remote network for VPN connection in tunnel mode in CIDR notation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardVPNFW 1.3.6.1.4.1.15450.2.1.3
OBJECT IDENTIFIER    

mGuardVPNFWINTable 1.3.6.1.4.1.15450.2.1.3.1
Table of firewall rules for incoming packets.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardVPNFWINEntry

mGuardVPNFWINEntry 1.3.6.1.4.1.15450.2.1.3.1.1
An entry containing data of a single rule.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardVPNFWINEntry  

mGuardVPNFWINconIndex 1.3.6.1.4.1.15450.2.1.3.1.1.1
Index to identify the rule.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..250  

mGuardVPNFWINruleIndex 1.3.6.1.4.1.15450.2.1.3.1.1.2
Index to identify the rule.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..250  

mGuardVPNFWINsourceIP 1.3.6.1.4.1.15450.2.1.3.1.1.3
The rule's source IP address
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardVPNFWINdestinationIP 1.3.6.1.4.1.15450.2.1.3.1.1.4
The rule's source IP address
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardVPNFWINsport 1.3.6.1.4.1.15450.2.1.3.1.1.5
The rule's source port
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardVPNFWINdport 1.3.6.1.4.1.15450.2.1.3.1.1.6
The rule's destination port
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardVPNFWINtarget 1.3.6.1.4.1.15450.2.1.3.1.1.7
The rule's target
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER accept(1), reject(2), drop(3)  

mGuardVPNFWINproto 1.3.6.1.4.1.15450.2.1.3.1.1.8
The rule's transport protocol
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tcp(1), udp(2), icmp(3), all(4)  

mGuardVPNFWINlog 1.3.6.1.4.1.15450.2.1.3.1.1.9
Log packets matching this rule.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardVPNFWINRowStatus 1.3.6.1.4.1.15450.2.1.3.1.1.10
RowStatus
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardVPNFWINcomment 1.3.6.1.4.1.15450.2.1.3.1.1.11
Commentary or name for this rule.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardVPNFWOUTTable 1.3.6.1.4.1.15450.2.1.3.2
Table of firewall rules for outgoing packets.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardVPNFWOUTEntry

mGuardVPNFWOUTEntry 1.3.6.1.4.1.15450.2.1.3.2.1
An entry containing data of a single rule.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardVPNFWOUTEntry  

mGuardVPNFWOUTconIndex 1.3.6.1.4.1.15450.2.1.3.2.1.1
Index to identify the rule.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..250  

mGuardVPNFWOUTruleIndex 1.3.6.1.4.1.15450.2.1.3.2.1.2
Index to identify the rule.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..250  

mGuardVPNFWOUTsourceIP 1.3.6.1.4.1.15450.2.1.3.2.1.3
The rule's source IP address
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardVPNFWOUTdestinationIP 1.3.6.1.4.1.15450.2.1.3.2.1.4
The rule's source IP address
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardVPNFWOUTsport 1.3.6.1.4.1.15450.2.1.3.2.1.5
The rule's source port
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardVPNFWOUTdport 1.3.6.1.4.1.15450.2.1.3.2.1.6
The rule's destination port
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardVPNFWOUTtarget 1.3.6.1.4.1.15450.2.1.3.2.1.7
The rule's target
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER accept(1), reject(2), drop(3)  

mGuardVPNFWOUTproto 1.3.6.1.4.1.15450.2.1.3.2.1.8
The rule's transport protocol
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tcp(1), udp(2), icmp(3), all(4)  

mGuardVPNFWOUTlog 1.3.6.1.4.1.15450.2.1.3.2.1.9
Log packets matching this rule.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardVPNFWOUTRowStatus 1.3.6.1.4.1.15450.2.1.3.2.1.10
RowStatus
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardVPNFWOUTcomment 1.3.6.1.4.1.15450.2.1.3.2.1.11
Commentary or name for this rule.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardVPNDynDNS 1.3.6.1.4.1.15450.2.1.4
OBJECT IDENTIFIER    

mGuardVPNDynDNSRegister 1.3.6.1.4.1.15450.2.1.4.1
OBJECT IDENTIFIER    

mGuardVPNDynDNSReg 1.3.6.1.4.1.15450.2.1.4.1.1
Register at a DynDNS service: no, yes
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

mGuardVPNDynDNSRegInterval 1.3.6.1.4.1.15450.2.1.4.1.2
Refresh interval for registration.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardVPNDynDNSRegServer 1.3.6.1.4.1.15450.2.1.4.1.3
DynDNS server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardVPNDynDNSRegLogin 1.3.6.1.4.1.15450.2.1.4.1.4
Login for DynDNS server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardVPNDynDNSRegPasswd 1.3.6.1.4.1.15450.2.1.4.1.5
Password for DynDNS server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardVPNDynDNSRegProvider 1.3.6.1.4.1.15450.2.1.4.1.6
DynDNS provider
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER inominate(1), dyndns(2), dns4biz(3)  

mGuardVPNDynDNSRegHostname 1.3.6.1.4.1.15450.2.1.4.1.7
Hostname to register
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardVPNDynDNSCheck 1.3.6.1.4.1.15450.2.1.4.2
OBJECT IDENTIFIER    

mGuardVPNDynDNSCheckDo 1.3.6.1.4.1.15450.2.1.4.2.1
Should hostnames of remote vpn gateways be checked after certain time intervals in case they are at a DynDNS provider? : no,yes
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

mGuardVPNDynDNSCheckRefresh 1.3.6.1.4.1.15450.2.1.4.2.2
Refresh interval for checking DNS names of remote VPN peers.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardVPNL2TP 1.3.6.1.4.1.15450.2.1.5
OBJECT IDENTIFIER    

mGuardVPNL2TPStart 1.3.6.1.4.1.15450.2.1.5.1
Start the L2TP Server ? yes,no
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mGuardVPNL2TPLocalIP 1.3.6.1.4.1.15450.2.1.5.2
Local IP for L2TP connections
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardVPNL2TPRemoteIPRangeStart 1.3.6.1.4.1.15450.2.1.5.3
Start of range of remote IPs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardVPNL2TPRemoteIPRangeEnd 1.3.6.1.4.1.15450.2.1.5.4
End of range of remote IPs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardVPNL2TPpppdOptTable 1.3.6.1.4.1.15450.2.1.5.5
A table of options set for the pppd process implementing IPsec/L2TP.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardVPNL2TPpppdOptEntry

mGuardVPNL2TPpppdOptEntry 1.3.6.1.4.1.15450.2.1.5.5.1
A single option set for pppd.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardVPNL2TPpppdOptEntry  

mGuardVPNL2TPpppdOptIndex 1.3.6.1.4.1.15450.2.1.5.5.1.1
Table index.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..100  

mGuardVPNL2TPpppdOptValue 1.3.6.1.4.1.15450.2.1.5.5.1.2
The pppd option.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardVPNL2TPpppdOptRowStatus 1.3.6.1.4.1.15450.2.1.5.5.1.3
Row Status
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardVPNSettings 1.3.6.1.4.1.15450.2.1.6
OBJECT IDENTIFIER    

mGuardVPNRequireUniqueIDs 1.3.6.1.4.1.15450.2.1.6.1
Allow only one open connection per identity (ie. X.509 certificate).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardVPNNatTraversal 1.3.6.1.4.1.15450.2.1.6.2
Encapsulate ESP traffic into IKE (UDP) packets to pass IPsec unaware NAT routers.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

mGuardVPNNatTPortfloating 1.3.6.1.4.1.15450.2.1.6.3
Some NAT routers fail to perform NAT originating low UDP ports. This option moves IKE from UDP 500 to UDP 4500 if possible
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

mGuardVPNNatTKeepAliveInterval 1.3.6.1.4.1.15450.2.1.6.4
NAT-T Keepalive Interval (in seconds). Keepalives will tell the NAT router not to close the connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardVPNNatTKeepAliveForce 1.3.6.1.4.1.15450.2.1.6.5
Force NAT-T Keepalive ?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardVPNIkeLog 1.3.6.1.4.1.15450.2.1.6.6
Log verbose information on IKE ?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardVPNHideTos 1.3.6.1.4.1.15450.2.1.6.7
When set to yes the TOS bit will be cleared on IPsec output.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardVPNmtu 1.3.6.1.4.1.15450.2.1.6.8
ipsec0 mtu
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardVPNStrictCRLPolicy 1.3.6.1.4.1.15450.2.1.6.9
Use a strict CRL policy?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardVPNNoCertReqSend 1.3.6.1.4.1.15450.2.1.6.10
Don't send certificate requests?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardFirewallIncoming 1.3.6.1.4.1.15450.2.2.1
OBJECT IDENTIFIER    

mGuardFirewallIncomingTable 1.3.6.1.4.1.15450.2.2.1.1
A table containing firewall rules for incoming packets.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardFirewallIncomingEntry

mGuardFirewallIncomingEntry 1.3.6.1.4.1.15450.2.2.1.1.1
An entry containing data of a single rule.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardFirewallIncomingEntry  

mGuardFWINruleIndex 1.3.6.1.4.1.15450.2.2.1.1.1.1
Index to identify the rule.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..250  

mGuardFWINsourceIP 1.3.6.1.4.1.15450.2.2.1.1.1.2
The rule's source IP address
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardFWINdestinationIP 1.3.6.1.4.1.15450.2.2.1.1.1.3
The rule's source IP address
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardFWINsport 1.3.6.1.4.1.15450.2.2.1.1.1.4
The rule's source port
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardFWINdport 1.3.6.1.4.1.15450.2.2.1.1.1.5
The rule's destination port
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardFWINtarget 1.3.6.1.4.1.15450.2.2.1.1.1.6
The rule's target
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER accept(1), reject(2), drop(3)  

mGuardFWINproto 1.3.6.1.4.1.15450.2.2.1.1.1.7
The rule's transport protocol
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tcp(1), udp(2), icmp(3), all(4)  

mGuardFWINlog 1.3.6.1.4.1.15450.2.2.1.1.1.8
Log packets matching this rule ?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardFWINRowStatus 1.3.6.1.4.1.15450.2.2.1.1.1.9
RowStatus
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardFWINcomment 1.3.6.1.4.1.15450.2.2.1.1.1.10
Commentary or name for this rule.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardFirewallINLogDefault 1.3.6.1.4.1.15450.2.2.1.2
Log entries for unknown connection attemps ?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardFirewallOutgoing 1.3.6.1.4.1.15450.2.2.2
OBJECT IDENTIFIER    

mGuardFirewallOutgoingTable 1.3.6.1.4.1.15450.2.2.2.1
A table containing firewall rules for outgoing packets.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardFirewallOutgoingEntry

mGuardFirewallOutgoingEntry 1.3.6.1.4.1.15450.2.2.2.1.1
An entry containing data of a single rule.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardFirewallOutgoingEntry  

mGuardFWOUTruleIndex 1.3.6.1.4.1.15450.2.2.2.1.1.1
Index to identify the rule.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..250  

mGuardFWOUTsourceIP 1.3.6.1.4.1.15450.2.2.2.1.1.2
The rule's source IP address
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardFWOUTdestinationIP 1.3.6.1.4.1.15450.2.2.2.1.1.3
The rule's source IP address
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardFWOUTsport 1.3.6.1.4.1.15450.2.2.2.1.1.4
The rule's source port
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardFWOUTdport 1.3.6.1.4.1.15450.2.2.2.1.1.5
The rule's destination port
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardFWOUTtarget 1.3.6.1.4.1.15450.2.2.2.1.1.6
The rule's target
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER accept(1), reject(2), drop(3)  

mGuardFWOUTproto 1.3.6.1.4.1.15450.2.2.2.1.1.7
The rule's transport protocol
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tcp(1), udp(2), icmp(3), all(4)  

mGuardFWOUTlog 1.3.6.1.4.1.15450.2.2.2.1.1.8
Log packets matching this rule ?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardFWOUTRowStatus 1.3.6.1.4.1.15450.2.2.2.1.1.9
RowStatus
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardFWOUTcomment 1.3.6.1.4.1.15450.2.2.2.1.1.10
Commentary or name for this rule.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardFirewallOUTLogDefault 1.3.6.1.4.1.15450.2.2.2.2
Log entries for unknown connection attemps ?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardFirewallPortforwarding 1.3.6.1.4.1.15450.2.2.3
OBJECT IDENTIFIER    

mGuardFirewallPortforwardTable 1.3.6.1.4.1.15450.2.2.3.1
A table containing firewall rules for portforwarding.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardFirewallPortforwardEntry

mGuardFirewallPortforwardEntry 1.3.6.1.4.1.15450.2.2.3.1.1
An entry containing data of a single rule.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardFirewallPortforwardEntry  

mGuardFWPORTFORWruleIndex 1.3.6.1.4.1.15450.2.2.3.1.1.1
Index to identify the rule.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..250  

mGuardFWPORTFORWinIP 1.3.6.1.4.1.15450.2.2.3.1.1.2
The rule's incoming IP address
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardFWPORTFORWoutIP 1.3.6.1.4.1.15450.2.2.3.1.1.3
The rule's redirect IP address
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardFWPORTFORWinport 1.3.6.1.4.1.15450.2.2.3.1.1.4
The rule's incoming port
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardFWPORTFORWoutport 1.3.6.1.4.1.15450.2.2.3.1.1.5
The rule's destination port
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardFWPORTFORWproto 1.3.6.1.4.1.15450.2.2.3.1.1.6
The rule's transport protocol
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tcp(1), udp(2)  

mGuardFWPORTFORWlog 1.3.6.1.4.1.15450.2.2.3.1.1.7
Log packets matching this rule ?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardFWPORTFORWRowStatus 1.3.6.1.4.1.15450.2.2.3.1.1.8
RowStatus
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardFWPORTFORWsrcIP 1.3.6.1.4.1.15450.2.2.3.1.1.9
The rule's source IP address
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardFWPORTFORWsrcport 1.3.6.1.4.1.15450.2.2.3.1.1.10
The rule's source port
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardFWPORTFORWcomment 1.3.6.1.4.1.15450.2.2.3.1.1.11
Commentary or name for this rule.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardFirewallNAT 1.3.6.1.4.1.15450.2.2.4
OBJECT IDENTIFIER    

mGuardFirewallNATRuleTable 1.3.6.1.4.1.15450.2.2.4.1
A table containing firewall rules for network address translation.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardFirewallNATRuleEntry

mGuardFirewallNATRuleEntry 1.3.6.1.4.1.15450.2.2.4.1.1
An entry containing data of a single rule.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardFirewallNATRuleEntry  

mGuardFWNATruleIndex 1.3.6.1.4.1.15450.2.2.4.1.1.1
Index to identify the rule.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..250  

mGuardFWNATIP 1.3.6.1.4.1.15450.2.2.4.1.1.2
The rule's source IP address
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardFWNATRowStatus 1.3.6.1.4.1.15450.2.2.4.1.1.3
RowStatus
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardFWNATOutIP 1.3.6.1.4.1.15450.2.2.4.1.1.4
Reserved for future use
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardFirewallExtended 1.3.6.1.4.1.15450.2.2.5
OBJECT IDENTIFIER    

mGuardFirewallIPConntrackMax 1.3.6.1.4.1.15450.2.2.5.1
Maximum size of connection tracking table
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardFirewallIPSynfloodLimitInt 1.3.6.1.4.1.15450.2.2.5.2
Maximum number of new outgoing TCP connections (SYN) per second
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardFirewallIPSynfloodLimitExt 1.3.6.1.4.1.15450.2.2.5.3
Maximum number of new incoming TCP connections (SYN) per second
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardFirewallICMPLimitInt 1.3.6.1.4.1.15450.2.2.5.4
Maximum number of outgoing ping frames (ICMP Echo Request) per second
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardFirewallICMPLimitExt 1.3.6.1.4.1.15450.2.2.5.5
Maximum number of incoming ping frames (ICMP Echo Request) per second
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardFirewallEnableConntrackFTP 1.3.6.1.4.1.15450.2.2.5.6
Enable active FTP NAT/Connection Tracking support
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardFirewallConntrackIRC 1.3.6.1.4.1.15450.2.2.5.7
Enable IRC NAT/Connection Tracking support
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardFirewallConntrackPPTP 1.3.6.1.4.1.15450.2.2.5.8
Enable PPTP NAT/Connection Tracking support
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardFirewallARPLimitInt 1.3.6.1.4.1.15450.2.2.5.9
Maximum number of outgoing arp request frames per second (stealth mode only)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardFirewallARPLimitExt 1.3.6.1.4.1.15450.2.2.5.10
Maximum number of incoming arp request frames per second (stealth mode only)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardFirewallICMPPolicy 1.3.6.1.4.1.15450.2.2.5.11
Allow incoming ICMP frames to the mGuard itself (router modes only): drop: default, ping: allow incoming ICMP echo request (required to answer ping), all: allow all incoming ICMP request to reach the TCP stack. Note: ICMP packets related to established connections are handled by the connection tracking. This setting is used for unrelated ICMP traffic.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER drop(1), ping(2), all(3)  

mGuardFirewallConntrackH323 1.3.6.1.4.1.15450.2.2.5.12
Enable H323 NAT/Connection Tracking support
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardFirewallIpUncleanMatch 1.3.6.1.4.1.15450.2.2.5.13
Enable IP Unclean Match
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardFirewall11NAT 1.3.6.1.4.1.15450.2.2.6
OBJECT IDENTIFIER    

mGuardFirewall11NATRuleTable 1.3.6.1.4.1.15450.2.2.6.1
A table containing firewall rules for network address translation.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardFirewall11NATRuleEntry

mGuardFirewall11NATRuleEntry 1.3.6.1.4.1.15450.2.2.6.1.1
An entry containing data of a single rule.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardFirewall11NATRuleEntry  

mGuardFW11NATruleIndex 1.3.6.1.4.1.15450.2.2.6.1.1.1
Index to identify the rule.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..250  

mGuardFW11NATLocal 1.3.6.1.4.1.15450.2.2.6.1.1.2
Network for 1:1 NAT on local interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardFW11NATRemote 1.3.6.1.4.1.15450.2.2.6.1.1.3
Network for 1:1 NAT on remote interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardFW11NATMask 1.3.6.1.4.1.15450.2.2.6.1.1.4
Netmask for 1:1 NAT between 0 and 32.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardFW11NATLog 1.3.6.1.4.1.15450.2.2.6.1.1.5
Log entries for this rule?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardFW11NATRowStatus 1.3.6.1.4.1.15450.2.2.6.1.1.10
RowStatus
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardFirewallUserFW 1.3.6.1.4.1.15450.2.2.7
OBJECT IDENTIFIER    

mGuardFirewallUserFWEnabled 1.3.6.1.4.1.15450.2.2.7.1
Enable the user firewall.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mGuardFirewallUserFWTemplateTable 1.3.6.1.4.1.15450.2.2.7.2
A table containing user firewall templates.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardFirewallUserFWTemplateEntry

mGuardFirewallUserFWTemplateEntry 1.3.6.1.4.1.15450.2.2.7.2.1
An entry containing a single user firewall template.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardFirewallUserFWTemplateEntry  

mGuardFirewallUserFWTemplateIndex 1.3.6.1.4.1.15450.2.2.7.2.1.1
Index to identify the user firewall template entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..100  

mGuardFirewallUserFWTemplateEnabled 1.3.6.1.4.1.15450.2.2.7.2.1.2
Enable this user firewall template.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mGuardFirewallUserFWTemplateName 1.3.6.1.4.1.15450.2.2.7.2.1.3
A descriptive name of the user firewall template.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardFirewallUserFWTemplateComment 1.3.6.1.4.1.15450.2.2.7.2.1.4
A comment associated with the user firewall template.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardFirewallUserFWTemplateTimeout 1.3.6.1.4.1.15450.2.2.7.2.1.5
The timeout in seconds of the user firewall template.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..86400  

mGuardFirewallUserFWTemplateSrcIP 1.3.6.1.4.1.15450.2.2.7.2.1.6
The source IP address of the user firewall template.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardFirewallUserFWTemplateRowStatus 1.3.6.1.4.1.15450.2.2.7.2.1.7
Row Status
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardFirewallUserFWTemplateUserTable 1.3.6.1.4.1.15450.2.2.7.3
A table containing the users associated with a user firewall template.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardFirewallUserFWTemplateUserEntry

mGuardFirewallUserFWTemplateUserEntry 1.3.6.1.4.1.15450.2.2.7.3.1
An entry containing a single user associated with a user firewall template.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardFirewallUserFWTemplateUserEntry  

mGuardFirewallUserFWTemplateUserTemplateIndex 1.3.6.1.4.1.15450.2.2.7.3.1.1
Index to identify the user firewall template entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..100  

mGuardFirewallUserFWTemplateUserIndex 1.3.6.1.4.1.15450.2.2.7.3.1.2
Index to identify the user within the user firewall template entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..100  

mGuardFirewallUserFWTemplateUserName 1.3.6.1.4.1.15450.2.2.7.3.1.3
The username of the user within the user firewall template entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardFirewallUserFWTemplateUserRowStatus 1.3.6.1.4.1.15450.2.2.7.3.1.4
Row Status
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardFirewallUserFWTemplateRuleTable 1.3.6.1.4.1.15450.2.2.7.4
A table containing the rules associated with a user firewall template.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardFirewallUserFWTemplateRuleEntry

mGuardFirewallUserFWTemplateRuleEntry 1.3.6.1.4.1.15450.2.2.7.4.1
An entry containing a single rule associated with a user firewall template.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardFirewallUserFWTemplateRuleEntry  

mGuardFirewallUserFWTemplateRuleTemplateIndex 1.3.6.1.4.1.15450.2.2.7.4.1.1
Index to identify the user firewall template entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..100  

mGuardFirewallUserFWTemplateRuleIndex 1.3.6.1.4.1.15450.2.2.7.4.1.2
Index to identify the rule within the user firewall template entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..100  

mGuardFirewallUserFWTemplateRuleProto 1.3.6.1.4.1.15450.2.2.7.4.1.3
The protocol of the rule within the user firewall template entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tcp(1), udp(2), icmp(3), all(4)  

mGuardFirewallUserFWTemplateRuleSrcPort 1.3.6.1.4.1.15450.2.2.7.4.1.4
The source port or port range of the rule within the user firewall template entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardFirewallUserFWTemplateRuleDstPort 1.3.6.1.4.1.15450.2.2.7.4.1.5
The destination port or port range of the rule within the user firewall template entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardFirewallUserFWTemplateRuleDstIP 1.3.6.1.4.1.15450.2.2.7.4.1.6
The destination IP address of the rule within the user firewall template entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardFirewallUserFWTemplateRuleLog 1.3.6.1.4.1.15450.2.2.7.4.1.7
Log packets matching the rule within the user firewall template entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardFirewallUserFWTemplateRuleComment 1.3.6.1.4.1.15450.2.2.7.4.1.8
A comment associated with the rule within the user firewall template entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardFirewallUserFWTemplateRuleRowStatus 1.3.6.1.4.1.15450.2.2.7.4.1.9
Row Status
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardNetworkMode 1.3.6.1.4.1.15450.2.3.1
Network mode: router,stealth
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER stealth(1), router(2), pppoe(3), pptp(4)  

mGuardStealth 1.3.6.1.4.1.15450.2.3.2
OBJECT IDENTIFIER    

mGuardStealthIPConfMode 1.3.6.1.4.1.15450.2.3.2.1
Type of IP Stack configuration in stealth mode. autodetect, static, multiple-clients
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER autoDetect(1), static(2), multi(3)  

mGuardStealthIPConfStatic 1.3.6.1.4.1.15450.2.3.2.2
OBJECT IDENTIFIER    

mGuardStealthStaticIP 1.3.6.1.4.1.15450.2.3.2.2.1
IP address of the protected client in stealth mode (using static ip configuration).
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardStealthStaticMAC 1.3.6.1.4.1.15450.2.3.2.2.2
MAC address of protected client in stealth mode (using static ip configuration).
Status: mandatory Access: read-write
OBJECT-TYPE    
  MacAddress  

mGuardStealthStaticActivate 1.3.6.1.4.1.15450.2.3.2.2.3
Button to activate Stealth Static IP configuration.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER activate(1), valuescached(2)  

mGuardStealthManageIP 1.3.6.1.4.1.15450.2.3.2.2.4
The management IP address of this system in stealth mode When set, this value is internally cached inside the agent until it is explicitly activated by writing the mGuardStealthManageActivate object. When read the currently active setting is returned, not regarding any cached values.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardStealthManageNetmask 1.3.6.1.4.1.15450.2.3.2.2.5
The management IP netmask of this system in stealth mode When set, this value is internally cached inside the agent until it is explicitly activated by writing the mGuardStealthManageActivate object. When read the currently active setting is returned, not regarding any cached values.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardStealthManageGateway 1.3.6.1.4.1.15450.2.3.2.2.6
The default gateway for the management IP of the mGuard in stealth mode When set, this value is internally cached inside the agent until it is explicitly activated by writing the mGuardStealthManageActivate object. When read the currently active setting is returned, not regarding any cached values.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardStealthManageActivate 1.3.6.1.4.1.15450.2.3.2.2.7
Button to activate the stealth management IP configuration. When activate(1) is written, any cached values for the mGuardStealthManageIP, mGuardStealthManageNetmask, and mGuardStealthManageGateway objects are activated. When read and one or more of the above mentioned objects have been cached, valuescached(2) is returned, not regarding whether the cached valued and the current value are different.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER activate(1), valuescached(2)  

mGuardStealthHiDiscoveryRelay 1.3.6.1.4.1.15450.2.3.2.3
Relay/bridge HiDiscovery queries when in Stealth Mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mGuardStealthHiDiscoveryState 1.3.6.1.4.1.15450.2.3.2.4
Enable HiDiscovery in StealthMode. This is mutually exclusive with the two HiDiscovery router mode settings of course.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER readwrite(1), disabled(2), readonly(3)  

mGuardStealthL2Filter 1.3.6.1.4.1.15450.2.3.2.5
OBJECT IDENTIFIER    

mGuardL2FilterInternTable 1.3.6.1.4.1.15450.2.3.2.5.1
Table of firewall rules for Layer 2 filtering on internal interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardL2FilterInternEntry

mGuardL2FilterInternEntry 1.3.6.1.4.1.15450.2.3.2.5.1.1
A single rule for Layer-2 filter in internal interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardL2FilterInternEntry  

mGuardL2FilterInternRuleIndex 1.3.6.1.4.1.15450.2.3.2.5.1.1.1
Table index.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..100  

mGuardL2FilterInternRowStatus 1.3.6.1.4.1.15450.2.3.2.5.1.1.2
Row Status.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardL2FilterInternSrcMac 1.3.6.1.4.1.15450.2.3.2.5.1.1.3
Source MAC Address to apply this filter rule for.
Status: mandatory Access: read-write
OBJECT-TYPE    
  MacAddress  

mGuardL2FilterInternDstMac 1.3.6.1.4.1.15450.2.3.2.5.1.1.4
Desitination MAC Address to apply this filter rule for.
Status: mandatory Access: read-write
OBJECT-TYPE    
  MacAddress  

mGuardL2FilterInternEthType 1.3.6.1.4.1.15450.2.3.2.5.1.1.5
Ethernet type to apply this filter rule for.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardL2FilterInternTarget 1.3.6.1.4.1.15450.2.3.2.5.1.1.6
The rule's target
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER accept(1), reject(2), drop(3)  

mGuardL2FilterInternComment 1.3.6.1.4.1.15450.2.3.2.5.1.1.7
Comment or name for this rule.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardL2FilterExternTable 1.3.6.1.4.1.15450.2.3.2.5.2
Table of firewall rules for Layer 2 filterin on external interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardL2FilterExternEntry

mGuardL2FilterExternEntry 1.3.6.1.4.1.15450.2.3.2.5.2.1
A single rule for Layer-2 filter in external interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardL2FilterExternEntry  

mGuardL2FilterExternRuleIndex 1.3.6.1.4.1.15450.2.3.2.5.2.1.1
Table index.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..100  

mGuardL2FilterExternRowStatus 1.3.6.1.4.1.15450.2.3.2.5.2.1.2
Row Status.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardL2FilterExternSrcMac 1.3.6.1.4.1.15450.2.3.2.5.2.1.3
Source MAC Address to apply this filter rule for.
Status: mandatory Access: read-write
OBJECT-TYPE    
  MacAddress  

mGuardL2FilterExternDstMac 1.3.6.1.4.1.15450.2.3.2.5.2.1.4
Desitination MAC Address to apply this filter rule for.
Status: mandatory Access: read-write
OBJECT-TYPE    
  MacAddress  

mGuardL2FilterExternEthType 1.3.6.1.4.1.15450.2.3.2.5.2.1.5
Ethernet type to apply this filter rule for.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardL2FilterExternTarget 1.3.6.1.4.1.15450.2.3.2.5.2.1.6
The rule's target
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER accept(1), reject(2), drop(3)  

mGuardL2FilterExternComment 1.3.6.1.4.1.15450.2.3.2.5.2.1.7
Comment or name for this rule.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardStealthL2ForwardGVRP 1.3.6.1.4.1.15450.2.3.2.5.3
Enable GVRP forwarding in StealthMode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardStealthL2ForwardSTP 1.3.6.1.4.1.15450.2.3.2.5.4
Enable STP forwarding in StealthMode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardStealthL2ForwardDHCP 1.3.6.1.4.1.15450.2.3.2.5.5
Enable DHCP forwarding in StealthMode. This will allow computers on the internal/protected side to receive their configuration via DHCP even if no special DHCP rule is configured in the firewall
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardStealthInterface 1.3.6.1.4.1.15450.2.3.2.6
OBJECT IDENTIFIER    

mGuardStealthMTU 1.3.6.1.4.1.15450.2.3.2.6.1
MTU to use in Stealth Mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardStealthVlanMTU 1.3.6.1.4.1.15450.2.3.2.6.2
MTU to use in Stealth Mode for VLAN packets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardStealthManageUseVLAN 1.3.6.1.4.1.15450.2.3.2.6.3
Use VLAn tagging for the management IP address in Stealth Mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardStealthManageVLanID 1.3.6.1.4.1.15450.2.3.2.6.4
VLAN ID for the management IP address in Stealth Mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardRouter 1.3.6.1.4.1.15450.2.3.3
OBJECT IDENTIFIER    

mGuardRouterLocal 1.3.6.1.4.1.15450.2.3.3.1
OBJECT IDENTIFIER    

mGuardRouterLocalIP 1.3.6.1.4.1.15450.2.3.3.1.1
The internal IP address of this device in router mode. When set, this value is internally cached inside the agent until it is explicitly activated by writing the mGuardRouterLocalActivate object. When read the currently active setting is returned, not regarding any cached values.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardRouterLocalNetmask 1.3.6.1.4.1.15450.2.3.3.1.2
The internal subnet mask of this device in router mode. When set, this value is internally cached inside the agent until it is explicitly activated by writing the mGuardRouterLocalActivate object. When read the currently active setting is returned, not regarding any cached values.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardRouterLocalActivate 1.3.6.1.4.1.15450.2.3.3.1.3
Button to activate the router local IP configuration. When activate(1) is written, any cached values for the mGuardRouterLocalIP, mGuardRouterLocalNetmask, and mGuardRouterExternStaticGateway objects are activated. When read and one or more of the above mentioned objects have been cached, valuescached(2) is returned, not regarding whether the cached valued and the current value are different.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER activate(1), valuescached(2)  

mGuardRouterLocalAliasesTable 1.3.6.1.4.1.15450.2.3.3.1.4
A table containing aliases for the local interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardRouterLocalAliasesEntry

mGuardRouterLocalAliasesEntry 1.3.6.1.4.1.15450.2.3.3.1.4.1
An entry containing a single alias for the local interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardRouterLocalAliasesEntry  

mGuardLocalAliasIndex 1.3.6.1.4.1.15450.2.3.3.1.4.1.1
Identifier.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..100  

mGuardLocalAliasIpAddress 1.3.6.1.4.1.15450.2.3.3.1.4.1.2
IP address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardLocalAliasNetmask 1.3.6.1.4.1.15450.2.3.3.1.4.1.3
Netmask.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardLocalAliasRowStatus 1.3.6.1.4.1.15450.2.3.3.1.4.1.4
RowStatus
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardLocalAliasUseVLAN 1.3.6.1.4.1.15450.2.3.3.1.4.1.5
Use VLAn tagging with this Alias interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardLocalAliasVLANid 1.3.6.1.4.1.15450.2.3.3.1.4.1.6
VLAN ID to be used with this Alias.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardLocalRoutesTable 1.3.6.1.4.1.15450.2.3.3.1.5
A table containing additional internal routes interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardLocalRoutesEntry

mGuardLocalRoutesEntry 1.3.6.1.4.1.15450.2.3.3.1.5.1
An entry containing a single internal route.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardLocalRoutesEntry  

mGuardLocalRouteIndex 1.3.6.1.4.1.15450.2.3.3.1.5.1.1
Identifier.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..100  

mGuardLocalRouteNetwork 1.3.6.1.4.1.15450.2.3.3.1.5.1.2
Routed network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardLocalRouteGateway 1.3.6.1.4.1.15450.2.3.3.1.5.1.3
Routing gateway.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardLocalRouteRowStatus 1.3.6.1.4.1.15450.2.3.3.1.5.1.4
RowStatus
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardRouterLocalDevMTU 1.3.6.1.4.1.15450.2.3.3.1.6
Set the MTU for the local interface. Router-Mode only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardRouterLocalUseVLAN 1.3.6.1.4.1.15450.2.3.3.1.7
Use VLAN for the local interface. Router-Mode only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardRouterLocalVlanId 1.3.6.1.4.1.15450.2.3.3.1.8
VLAN-ID for the local interface, used only if set to use VLAN. Router-Mode only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardRouterLocalDevVlanMTU 1.3.6.1.4.1.15450.2.3.3.1.9
Set the MTU for the VLAN if enabled on local interface. Router-Mode only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardRouterExtern 1.3.6.1.4.1.15450.2.3.3.2
OBJECT IDENTIFIER    

mGuardRouterExternDHCP 1.3.6.1.4.1.15450.2.3.3.2.1
When enabled, retrieve the external IP via DHCP, otherwise use the value stored in mGuardRouterExternStaticIP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mGuardRouterExternStatic 1.3.6.1.4.1.15450.2.3.3.2.2
OBJECT IDENTIFIER    

mGuardRouterExternStaticIP 1.3.6.1.4.1.15450.2.3.3.2.2.1
The external IP address of this device in router mode (when statically configured). When set, this value is internally cached inside the agent until it is explicitly activated by writing the mGuardRouterExternStaticActivate object. When read the currently active setting is returned, not regarding any cached values.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardRouterExternStaticNetmask 1.3.6.1.4.1.15450.2.3.3.2.2.2
The external netmask of this device in router mode (when statically configured). When set, this value is internally cached inside the agent until it is explicitly activated by writing the mGuardRouterExternStaticActivate object. When read the currently active setting is returned, not regarding any cached values.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardRouterExternStaticGateway 1.3.6.1.4.1.15450.2.3.3.2.2.3
The (extern) default gateway of this device in router mode (when statically configured). When set, this value is internally cached inside the agent until it is explicitly activated by writing the mGuardRouterExternStaticActivate or mGuardRouterLocalActivate object. When read the currently active setting is returned, not regarding any cached values.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardRouterExternActivate 1.3.6.1.4.1.15450.2.3.3.2.2.4
Button to activate the router extern IP configuration. When activate(1) is written, any cached values for the mGuardRouterExternStaticIP, mGuardRouterExternStaticNetmask, and mGuardRouterExternStaticGateway objects are activated. When read and one or more of the above mentioned objects have been cached, valuescached(2) is returned, not regarding whether the cached valued and the current value are different.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER activate(1), valuescached(2)  

mGuardRouterExternDevMTU 1.3.6.1.4.1.15450.2.3.3.2.6
Set the MTU for the external interface. Router-Mode only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardRouterExternUseVLAN 1.3.6.1.4.1.15450.2.3.3.2.7
Use VLAN for the external interface. Router-Mode only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardRouterExternVlanId 1.3.6.1.4.1.15450.2.3.3.2.8
VLAN-ID for the external interface, used only if set to use VLAN. Router-Mode only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardRouterExternDevVlanMTU 1.3.6.1.4.1.15450.2.3.3.2.9
Set the MTU for the VLAN if enabled on external interface. Router-Mode only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardRouterExternAliasesTable 1.3.6.1.4.1.15450.2.3.3.2.2.5
A table containing aliases for the external interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardRouterExternAliasesEntry

mGuardRouterExternAliasesEntry 1.3.6.1.4.1.15450.2.3.3.2.2.5.1
An entry containing a single alias for the extern interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardRouterExternAliasesEntry  

mGuardExternAliasIndex 1.3.6.1.4.1.15450.2.3.3.2.2.5.1.1
Identifier.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..100  

mGuardExternAliasIpAddress 1.3.6.1.4.1.15450.2.3.3.2.2.5.1.2
IP address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardExternAliasNetmask 1.3.6.1.4.1.15450.2.3.3.2.2.5.1.3
Netmask.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardExternAliasRowStatus 1.3.6.1.4.1.15450.2.3.3.2.2.5.1.4
RowStatus
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardExternAliasUseVLAN 1.3.6.1.4.1.15450.2.3.3.2.2.5.1.5
Use VLAn tagging with this Alias interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardExternAliasVLANid 1.3.6.1.4.1.15450.2.3.3.2.2.5.1.6
VLAN ID to be used with this Alias.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardExternRoutesTable 1.3.6.1.4.1.15450.2.3.3.2.2.6
A table containing additional external routes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardExternRoutesEntry

mGuardExternRoutesEntry 1.3.6.1.4.1.15450.2.3.3.2.2.6.1
An entry containing a single external route.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardExternRoutesEntry  

mGuardExternRouteIndex 1.3.6.1.4.1.15450.2.3.3.2.2.6.1.1
Identifier.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..100  

mGuardExternRouteNetwork 1.3.6.1.4.1.15450.2.3.3.2.2.6.1.2
Routed network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardExternRouteGateway 1.3.6.1.4.1.15450.2.3.3.2.2.6.1.3
Routing gateway.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardExternRouteRowStatus 1.3.6.1.4.1.15450.2.3.3.2.2.6.1.4
RowStatus
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardRouterHiDiscovery 1.3.6.1.4.1.15450.2.3.3.3
OBJECT IDENTIFIER    

mGuardRouterHiDiscoveryIntern 1.3.6.1.4.1.15450.2.3.3.3.1
Enable HiDiscovery on internal interface in RouterMode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER readwrite(1), disabled(2), readonly(3)  

mGuardRouterHiDiscoveryExtern 1.3.6.1.4.1.15450.2.3.3.3.2
Enable HiDiscovery on external interface in RouterMode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER readwrite(1), disabled(2), readonly(3)  

mGuardPPPOE 1.3.6.1.4.1.15450.2.3.4
OBJECT IDENTIFIER    

mGuardPPPOELogin 1.3.6.1.4.1.15450.2.3.4.1
PPPoE login user name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardPPPOEPasswd 1.3.6.1.4.1.15450.2.3.4.2
PPPoE login password.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardPPPOEMSS 1.3.6.1.4.1.15450.2.3.4.3
The maximum segment size used for PPPoE
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardPPPOEServiceName 1.3.6.1.4.1.15450.2.3.4.4
The service name used for PPPoE, normally not used!
Status: obsolete Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardPPPOEAccessConcentName 1.3.6.1.4.1.15450.2.3.4.5
The access concentrator name used for PPPoE, normally not used!
Status: obsolete Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardPPPOEHostUnique 1.3.6.1.4.1.15450.2.3.4.6
Set 'Host-Unique' tag for discovery, required for operation with several daemons
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mGuardPPPOEpppdOptionsTable 1.3.6.1.4.1.15450.2.3.4.7
A table of options set for the pppd process implementing PPPOE.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardPPPOEpppdOptionsEntry

mGuardPPPOEpppdOptionsEntry 1.3.6.1.4.1.15450.2.3.4.7.1
A single option set for pppd.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardPPPOEpppdOptionsEntry  

mGuardPPPOEpppdOptionsIndex 1.3.6.1.4.1.15450.2.3.4.7.1.1
Table index.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..100  

mGuardPPPOEpppdOptionsValue 1.3.6.1.4.1.15450.2.3.4.7.1.2
The pppd option.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardPPPOEpppdOptionsRowStatus 1.3.6.1.4.1.15450.2.3.4.7.1.3
Row Status
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardDHCP 1.3.6.1.4.1.15450.2.3.5
OBJECT IDENTIFIER    

mGuardDHCPInt 1.3.6.1.4.1.15450.2.3.5.1
OBJECT IDENTIFIER    

mGuardDHCPExt 1.3.6.1.4.1.15450.2.3.5.2
OBJECT IDENTIFIER    

mGuardDHCPIntStart 1.3.6.1.4.1.15450.2.3.5.1.1
Enable the internal DHCP/DHCP Relay Server ?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), enabled-relay(3)  

mGuardDHCPIntPoolEnable 1.3.6.1.4.1.15450.2.3.5.1.2
Enable the dynamic DHCP Pool ?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mGuardDHCPIntRangeStart 1.3.6.1.4.1.15450.2.3.5.1.3
Start of ip range provided by the builtin DHCP Server for the internal network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardDHCPIntRangeEnd 1.3.6.1.4.1.15450.2.3.5.1.4
End of ip range provided by the builtin DHCP Server for the internal network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardDHCPIntNetmask 1.3.6.1.4.1.15450.2.3.5.1.5
Netmask provided by the builtin DHCP Server for the internal network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardDHCPIntGateway 1.3.6.1.4.1.15450.2.3.5.1.6
Default gateway provided by the builtin DHCP Server for the internal network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardDHCPIntDnsServer 1.3.6.1.4.1.15450.2.3.5.1.7
DNS Server provided by the builtin DHCP server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardDHCPIntStaticTable 1.3.6.1.4.1.15450.2.3.5.1.8
A table containing static MAC-IP address allocations.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardDHCPIntStaticEntry

mGuardDHCPIntStaticEntry 1.3.6.1.4.1.15450.2.3.5.1.8.1
An entry containing a single MAC-IP address allocation.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardDHCPIntStaticEntry  

mGuardDHCPIntStaticIndex 1.3.6.1.4.1.15450.2.3.5.1.8.1.1
Index to identify allocation entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..250  

mGuardDHCPIntStaticMAC 1.3.6.1.4.1.15450.2.3.5.1.8.1.2
The client's MAC address
Status: mandatory Access: read-write
OBJECT-TYPE    
  MacAddress  

mGuardDHCPIntStaticIP 1.3.6.1.4.1.15450.2.3.5.1.8.1.3
The allocated IP address
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardDHCPIntStaticRowStatus 1.3.6.1.4.1.15450.2.3.5.1.8.1.4
RowStatus
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardDHCPIntBroadcast 1.3.6.1.4.1.15450.2.3.5.1.9
Broadcast address provided by the builtin DHCP server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardDHCPIntWINS 1.3.6.1.4.1.15450.2.3.5.1.10
WINS provided by the builtin DHCP Server for the internal network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardDHCPIntLeaseTime 1.3.6.1.4.1.15450.2.3.5.1.11
Lifetime for DHCP Leases
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardDHCPIntRelayServerTable 1.3.6.1.4.1.15450.2.3.5.1.50
List of DHCP Servers to relay to.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardDHCPIntRelayServerEntry

mGuardDHCPIntRelayServerEntry 1.3.6.1.4.1.15450.2.3.5.1.50.1
An entry containing a DHCP Relay Server IP.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardDHCPIntRelayServerEntry  

mGuardDHCPIntRelayServerIndex 1.3.6.1.4.1.15450.2.3.5.1.50.1.1
Index to identify relay server entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..100  

mGuardDHCPIntRelayServerIP 1.3.6.1.4.1.15450.2.3.5.1.50.1.2
The allocated IP address
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardDHCPIntRelayRowStatus 1.3.6.1.4.1.15450.2.3.5.1.50.1.10
RowStatus
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardDHCPIntRelayMaxHop 1.3.6.1.4.1.15450.2.3.5.1.51
Maximal number of Hops when relaying.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardDHCPIntRelayAppend 1.3.6.1.4.1.15450.2.3.5.1.52
Whether to append DHCP Relay Agent Information.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

mGuardDHCPIntRelayAppendLimit 1.3.6.1.4.1.15450.2.3.5.1.53
When appending DHCP Relay Agent Information would exceed this limit, it is not appended.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardDHCPIntRelayCircuitInfo 1.3.6.1.4.1.15450.2.3.5.1.54
What to append as Circuit ID: none: no Cicuit ID if-idx: the system interface index (1 octet) if-name: the systems interface name (ascii) if-mac: the MAC address (6 octets) if-ip: the IP address (4 octets) sysname: the systems hostname text: a text defined in mGuardDHCPIntRelayCircuitText.0 if-prefixed-ip: prefix IP with 0xA1 Sub Remote ID (2+4 octets) rs2: Hirschmann RS2 Sub Circuit Information
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), if-idx(2), if-name(3), if-mac(4), if-ip(5), sysname(6), text(7), if-prefixed-ip(8), rs2(9)  

mGuardDHCPIntRelayCircuitText 1.3.6.1.4.1.15450.2.3.5.1.55
Text in case mGuardDHCPIntRelayCircuitInfo.0 is set to text(7).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardDHCPIntRelayRemoteInfo 1.3.6.1.4.1.15450.2.3.5.1.56
What to append as Remote ID: none: no Cicuit ID if-idx: the system interface index (1 octet) if-name: the systems interface name (ascii) if-mac: the MAC address (6 octets) if-ip: the IP address (4 octets) sysname: the systems hostname text: a text defined in mGuardDHCPIntRelayRemoteText.0 if-prefixed-ip: prefix IP with 0xA1 Sub Remote ID (2+4 octets) rs2: Hirschmann RS2 Sub Circuit Information
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), if-idx(2), if-name(3), if-mac(4), if-ip(5), sysname(6), text(7), if-prefixed-ip(8), rs2(9)  

mGuardDHCPIntRelayRemoteText 1.3.6.1.4.1.15450.2.3.5.1.57
Text in case mGuardDHCPIntRelayRemoteInfo.0 is set to text(7).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardDHCPExtStart 1.3.6.1.4.1.15450.2.3.5.2.1
Enable the external DHCP/DHCP Relay Server ?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), enabled-relay(3)  

mGuardDHCPExtPoolEnable 1.3.6.1.4.1.15450.2.3.5.2.2
Enable the dynamic DHCP Pool ?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mGuardDHCPExtRangeStart 1.3.6.1.4.1.15450.2.3.5.2.3
Start of ip range provided by the builtin DHCP Server for the external network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardDHCPExtRangeEnd 1.3.6.1.4.1.15450.2.3.5.2.4
End of ip range provided by the builtin DHCP Server for the external network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardDHCPExtNetmask 1.3.6.1.4.1.15450.2.3.5.2.5
Netmask provided by the builtin DHCP Server for the external network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardDHCPExtGateway 1.3.6.1.4.1.15450.2.3.5.2.6
Default gateway provided by the builtin DHCP Server for the external network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardDHCPExtDnsServer 1.3.6.1.4.1.15450.2.3.5.2.7
DNS Server provided by the builtin DHCP server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardDHCPExtStaticTable 1.3.6.1.4.1.15450.2.3.5.2.8
A table containing static MAC-IP address allocations.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardDHCPExtStaticEntry

mGuardDHCPExtStaticEntry 1.3.6.1.4.1.15450.2.3.5.2.8.1
An entry containing a single MAC-IP address allocation.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardDHCPExtStaticEntry  

mGuardDHCPExtStaticIndex 1.3.6.1.4.1.15450.2.3.5.2.8.1.1
Index to identify allocation entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..250  

mGuardDHCPExtStaticMAC 1.3.6.1.4.1.15450.2.3.5.2.8.1.2
The client's MAC address
Status: mandatory Access: read-write
OBJECT-TYPE    
  MacAddress  

mGuardDHCPExtStaticIP 1.3.6.1.4.1.15450.2.3.5.2.8.1.3
The allocated IP address
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardDHCPExtStaticRowStatus 1.3.6.1.4.1.15450.2.3.5.2.8.1.4
RowStatus
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardDHCPExtBroadcast 1.3.6.1.4.1.15450.2.3.5.2.9
Broadcast address provided by the builtin DHCP server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardDHCPExtWINS 1.3.6.1.4.1.15450.2.3.5.2.10
WINS provided by the builtin DHCP Server for the external network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardDHCPExtLeaseTime 1.3.6.1.4.1.15450.2.3.5.2.11
Lifetime for DHCP Leases
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardDHCPExtRelayServerTable 1.3.6.1.4.1.15450.2.3.5.2.50
List of DHCP Servers to relay to.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardDHCPExtRelayServerEntry

mGuardDHCPExtRelayServerEntry 1.3.6.1.4.1.15450.2.3.5.2.50.1
An entry containing a DHCP Relay Server IP.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardDHCPExtRelayServerEntry  

mGuardDHCPExtRelayServerIndex 1.3.6.1.4.1.15450.2.3.5.2.50.1.1
Index to identify relay server entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..100  

mGuardDHCPExtRelayServerIP 1.3.6.1.4.1.15450.2.3.5.2.50.1.2
The allocated IP address
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardDHCPExtRelayRowStatus 1.3.6.1.4.1.15450.2.3.5.2.50.1.10
RowStatus
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardDHCPExtRelayMaxHop 1.3.6.1.4.1.15450.2.3.5.2.51
Maximal number of Hops when relaying.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardDHCPExtRelayAppend 1.3.6.1.4.1.15450.2.3.5.2.52
Whether to append DHCP Relay Agent Information.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

mGuardDHCPExtRelayAppendLimit 1.3.6.1.4.1.15450.2.3.5.2.53
When appending DHCP Relay Agent Information would exceed this limit, it is not appended.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardDHCPExtRelayCircuitInfo 1.3.6.1.4.1.15450.2.3.5.2.54
What to append as Circuit ID: none: no Cicuit ID if-idx: the system interface index (1 octet) if-name: the systems interface name (ascii) if-mac: the MAC address (6 octets) if-ip: the IP address (4 octets) sysname: the systems hostname text: a text defined in mGuardDHCPExtRelayCircuitText.0 if-prefixed-ip: prefix IP with 0xA1 Sub Remote ID (2+4 octets) rs2: Hirschmann RS2 Sub Circuit Information
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), if-idx(2), if-name(3), if-mac(4), if-ip(5), sysname(6), text(7), if-prefixed-ip(8), rs2(9)  

mGuardDHCPExtRelayCircuitText 1.3.6.1.4.1.15450.2.3.5.2.55
Text in case mGuardDHCPExtRelayCircuitInfo.0 is set to text(7).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardDHCPExtRelayRemoteInfo 1.3.6.1.4.1.15450.2.3.5.2.56
What to append as Remote ID: none: no Cicuit ID if-idx: the system interface index (1 octet) if-name: the systems interface name (ascii) if-mac: the MAC address (6 octets) if-ip: the IP address (4 octets) sysname: the systems hostname text: a text defined in mGuardDHCPExtRelayRemoteText.0 if-prefixed-ip: prefix IP with 0xA1 Sub Remote ID (2+4 octets) rs2: Hirschmann RS2 Sub Circuit Information
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), if-idx(2), if-name(3), if-mac(4), if-ip(5), sysname(6), text(7), if-prefixed-ip(8), rs2(9)  

mGuardDHCPExtRelayRemoteText 1.3.6.1.4.1.15450.2.3.5.2.57
Text in case mGuardDHCPExtRelayRemoteInfo.0 is set to text(7).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardDNS 1.3.6.1.4.1.15450.2.3.6
OBJECT IDENTIFIER    

mGuardDNSSearchPath 1.3.6.1.4.1.15450.2.3.6.1
Domain search path.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardDNSServerType 1.3.6.1.4.1.15450.2.3.6.2
Type of DNS Servers to query: root: DNS root servers provider: Provider defined DNS Servers (via DHCP,PPPOE) user: User defined DNS Servers
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER root(1), provider(2), user(3)  

mGuardDNSUserDefinedServerTable 1.3.6.1.4.1.15450.2.3.6.3
A table containing user defined DNS Servers
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardDNSUserDefinedServerEntry

mGuardDNSUserDefinedServerEntry 1.3.6.1.4.1.15450.2.3.6.3.1
A mGuardDNSServer entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardDNSUserDefinedServerEntry  

mGuarddnsServerIndex 1.3.6.1.4.1.15450.2.3.6.3.1.1
Index to identify DNS Server entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..100  

mGuarddnsServerIP 1.3.6.1.4.1.15450.2.3.6.3.1.2
DNS Server IP address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuarddnsServerRowStatus 1.3.6.1.4.1.15450.2.3.6.3.1.3
RowStatus
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardDNSCacheEnabled 1.3.6.1.4.1.15450.2.3.6.4
Enable or disable built-in DNS cache feature
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mGuardNetworkStatus 1.3.6.1.4.1.15450.2.3.7
OBJECT IDENTIFIER    

mGuardNetworkStatMode 1.3.6.1.4.1.15450.2.3.7.1
Current network mode of this device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardNetworkStatExtIP 1.3.6.1.4.1.15450.2.3.7.2
external IP address of this device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardNetworkStatGateway 1.3.6.1.4.1.15450.2.3.7.3
Default gateway via the external IP address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardNetworkStatVPN 1.3.6.1.4.1.15450.2.3.7.4
Statistics about the VPN connections (total/used/up).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardNetworkStatDynIPReg 1.3.6.1.4.1.15450.2.3.7.5
Statistics about VPN DynIP registration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardNetworkStatHTTPSRemAccess 1.3.6.1.4.1.15450.2.3.7.6
Status of HTTPS remote access (yes/no).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardNetworkStatSSHRemoteAccess 1.3.6.1.4.1.15450.2.3.7.7
Status of SSH remote access (yes/no).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardNetworkSoftwareVersion 1.3.6.1.4.1.15450.2.3.7.8
Current software version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardNetworkStatUptime 1.3.6.1.4.1.15450.2.3.7.9
Uptime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardNetworkStatLanguage 1.3.6.1.4.1.15450.2.3.7.10
GAI Language.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardHostname 1.3.6.1.4.1.15450.2.3.8
The hostname of this system
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardHostnameMode 1.3.6.1.4.1.15450.2.3.9
Hostname mode: 1: defined by mGuardHostname, 2: provider defined (e.g. DHCP)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER userDefined(1), providerDefined(2)  

mGuardPPTP 1.3.6.1.4.1.15450.2.3.10
OBJECT IDENTIFIER    

mGuardPPTPLogin 1.3.6.1.4.1.15450.2.3.10.1
PPTP login
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardPPTPassword 1.3.6.1.4.1.15450.2.3.10.2
PPTP password
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardPPTPLocalIPMode 1.3.6.1.4.1.15450.2.3.10.3
When set to static will use the value from mGuardPPTPLocalIP on it external interface connecting to the PPTP server/modem. Otherwise it it use DHCP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER static(1), dhcp(2)  

mGuardPPTPLocalIP 1.3.6.1.4.1.15450.2.3.10.4
The external IP of this system when connecting to the PPTP server/modem when mGuardPPTPLocalIPMode is set to static.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardPPTPModemIP 1.3.6.1.4.1.15450.2.3.10.5
The IP of the PPTP server/modem.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardPPTPpppdOptionsTable 1.3.6.1.4.1.15450.2.3.10.6
A table of options set for the pppd process implementing PPTP.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardPPTPpppdOptionsEntry

mGuardPPTPpppdOptionsEntry 1.3.6.1.4.1.15450.2.3.10.6.1
A single option set for pppd.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardPPTPpppdOptionsEntry  

mGuardPPTPpppdOptionsIndex 1.3.6.1.4.1.15450.2.3.10.6.1.1
Table index.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..100  

mGuardPPTPpppdOptionsValue 1.3.6.1.4.1.15450.2.3.10.6.1.2
The pppd option.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardPPTPpppdOptionsRowStatus 1.3.6.1.4.1.15450.2.3.10.6.1.3
Row Status
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardSerial 1.3.6.1.4.1.15450.2.3.11
OBJECT IDENTIFIER    

mGuardSerialBaud 1.3.6.1.4.1.15450.2.3.11.1
Baudrate for the serial line. Possible values are 9600, 19200, 38400, 57600
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardSerialHWHandshakeEnable 1.3.6.1.4.1.15450.2.3.11.2
Enable hardware handshake
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mGuardSerialPPP 1.3.6.1.4.1.15450.2.3.11.3
OBJECT IDENTIFIER    

mGuardSerialPPPEnable 1.3.6.1.4.1.15450.2.3.11.3.1
Enable PPP
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mGuardSerialPPPLogin 1.3.6.1.4.1.15450.2.3.11.3.2
Login for Serial PPP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardSerialPPPPasswd 1.3.6.1.4.1.15450.2.3.11.3.3
Password for Serial PPP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardSerialPPPLocalIP 1.3.6.1.4.1.15450.2.3.11.3.4
Local IP address for PPP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardSerialPPPRemoteIP 1.3.6.1.4.1.15450.2.3.11.3.5
Remote IP address for PPP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardSerialPPPFWIN 1.3.6.1.4.1.15450.2.3.11.3.6
OBJECT IDENTIFIER    

mGuardSerialPPPFWINTable 1.3.6.1.4.1.15450.2.3.11.3.6.1
A table containing firewall rules for incoming packets.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardSerialPPPFWINEntry

mGuardSerialPPPFWINEntry 1.3.6.1.4.1.15450.2.3.11.3.6.1.1
An entry containing data of a single rule.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardSerialPPPFWINEntry  

mGuardSerialPPPFWINruleIndex 1.3.6.1.4.1.15450.2.3.11.3.6.1.1.1
Index to identify the rule.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..250  

mGuardSerialPPPFWINsourceIP 1.3.6.1.4.1.15450.2.3.11.3.6.1.1.2
The rule's source IP address
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardSerialPPPFWINdestinationIP 1.3.6.1.4.1.15450.2.3.11.3.6.1.1.3
The rule's source IP address
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardSerialPPPFWINsport 1.3.6.1.4.1.15450.2.3.11.3.6.1.1.4
The rule's source port
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardSerialPPPFWINdport 1.3.6.1.4.1.15450.2.3.11.3.6.1.1.5
The rule's destination port
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardSerialPPPFWINtarget 1.3.6.1.4.1.15450.2.3.11.3.6.1.1.6
The rule's target
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER accept(1), reject(2), drop(3)  

mGuardSerialPPPFWINproto 1.3.6.1.4.1.15450.2.3.11.3.6.1.1.7
The rule's protocol
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tcp(1), udp(2), icmp(3), all(4)  

mGuardSerialPPPFWINlog 1.3.6.1.4.1.15450.2.3.11.3.6.1.1.8
Log packets matching this rule ?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardSerialPPPFWINRowStatus 1.3.6.1.4.1.15450.2.3.11.3.6.1.1.9
RowStatus
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardSerialPPPFWINcomment 1.3.6.1.4.1.15450.2.3.11.3.6.1.1.10
Commentary or name for this rule.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardSerialPPPFWINLogDefault 1.3.6.1.4.1.15450.2.3.11.3.6.2
Log entries for undefined incoming connection attemps.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardSerialPPPFWOUT 1.3.6.1.4.1.15450.2.3.11.3.7
OBJECT IDENTIFIER    

mGuardSerialPPPFWOUTTable 1.3.6.1.4.1.15450.2.3.11.3.7.1
A table containing firewall rules for incoming packets.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardSerialPPPFWOUTEntry

mGuardSerialPPPFWOUTEntry 1.3.6.1.4.1.15450.2.3.11.3.7.1.1
An entry containing data of a single rule.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardSerialPPPFWOUTEntry  

mGuardSerialPPPFWOUTruleIndex 1.3.6.1.4.1.15450.2.3.11.3.7.1.1.1
Index to identify the rule.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..250  

mGuardSerialPPPFWOUTsourceIP 1.3.6.1.4.1.15450.2.3.11.3.7.1.1.2
The rule's source IP address
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardSerialPPPFWOUTtargetIP 1.3.6.1.4.1.15450.2.3.11.3.7.1.1.3
The rule's source IP address
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardSerialPPPFWOUTsport 1.3.6.1.4.1.15450.2.3.11.3.7.1.1.4
The rule's source port
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardSerialPPPFWOUTdport 1.3.6.1.4.1.15450.2.3.11.3.7.1.1.5
The rule's destination port
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardSerialPPPFWOUTtarget 1.3.6.1.4.1.15450.2.3.11.3.7.1.1.6
The rule's target
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER accept(1), reject(2), drop(3)  

mGuardSerialPPPFWOUTproto 1.3.6.1.4.1.15450.2.3.11.3.7.1.1.7
The rule's protocol
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tcp(1), udp(2), icmp(3), all(4)  

mGuardSerialPPPFWOUTlog 1.3.6.1.4.1.15450.2.3.11.3.7.1.1.8
Log packets matching this rule ?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardSerialPPPFWOUTRowStatus 1.3.6.1.4.1.15450.2.3.11.3.7.1.1.9
RowStatus
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardSerialPPPFWOUTcomment 1.3.6.1.4.1.15450.2.3.11.3.7.1.1.10
Commentary or name for this rule.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardSerialPPPFWOUTLogDefault 1.3.6.1.4.1.15450.2.3.11.3.7.2
Log entries for unknown outgoing connection attemps ?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardArpTimeout 1.3.6.1.4.1.15450.2.3.12
Global ARP timeout in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardPasswords 1.3.6.1.4.1.15450.2.4.1
OBJECT IDENTIFIER    

mGuardRootPassword 1.3.6.1.4.1.15450.2.4.1.1
Object to change the root password. Change by setting:
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardAdminPassword 1.3.6.1.4.1.15450.2.4.1.2
Object to change the admin password.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardUserPassword 1.3.6.1.4.1.15450.2.4.1.3
Object to change the user password.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardUserPwdEnable 1.3.6.1.4.1.15450.2.4.1.4
Enable user password ? yes,no
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

mGuardHTTPSRemoteAccess 1.3.6.1.4.1.15450.2.4.2
OBJECT IDENTIFIER    

mGuardHTTPSRemoteEnable 1.3.6.1.4.1.15450.2.4.2.1
Value to control HTTPS remote access: yes: enabled no: disabled
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

mGuardHTTPSRemotePort 1.3.6.1.4.1.15450.2.4.2.2
Port for HTTPS remote Access (regularly 443), service names allowed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardHTTPSRemoteFWRuleTable 1.3.6.1.4.1.15450.2.4.2.3
A table containing firewall rules to allow HTTPS remote access.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardHTTPSRemoteFWRuleEntry

mGuardHTTPSRemoteFWRuleEntry 1.3.6.1.4.1.15450.2.4.2.3.1
An entry containing a single firewall rule to allow HTTPS remote access.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardHTTPSRemoteFWRuleEntry  

mGuardHTTPSFWruleIndex 1.3.6.1.4.1.15450.2.4.2.3.1.1
Index to identify rule.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..100  

mGuardHTTPSFWsourceIP 1.3.6.1.4.1.15450.2.4.2.3.1.2
The rule's source IP address
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardHTTPSFWinterface 1.3.6.1.4.1.15450.2.4.2.3.1.3
The network interface the rule belongs to (extern/intern).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER extern(1), intern(2)  

mGuardHTTPSFWtarget 1.3.6.1.4.1.15450.2.4.2.3.1.4
The target of the rule (accept,reject,drop).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER accept(1), reject(2), drop(3)  

mGuardHTTPSFWlog 1.3.6.1.4.1.15450.2.4.2.3.1.5
Log packets matching this rule ?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardHTTPSFWRowStatus 1.3.6.1.4.1.15450.2.4.2.3.1.6
RowStatus
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardHTTPSFWcomment 1.3.6.1.4.1.15450.2.4.2.3.1.7
Commentary or name for this rule.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardSSHRemoteAccess 1.3.6.1.4.1.15450.2.4.3
OBJECT IDENTIFIER    

mGuardSSHRemoteEnable 1.3.6.1.4.1.15450.2.4.3.1
Value to control SSH remote access: yes: enabled no: disabled
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

mGuardSSHRemotePort 1.3.6.1.4.1.15450.2.4.3.2
Port for SSH remote Access (regularly 22), service names allowed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardSSHRemoteFWRuleTable 1.3.6.1.4.1.15450.2.4.3.3
A table containing firewall rules to allow SSH remote access.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardSSHRemoteFWRuleEntry

mGuardSSHRemoteFWRuleEntry 1.3.6.1.4.1.15450.2.4.3.3.1
An entry containing a single firewall rule to allow SSH remote access.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardSSHRemoteFWRuleEntry  

mGuardSSHFWruleIndex 1.3.6.1.4.1.15450.2.4.3.3.1.1
Index to identify rule.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..100  

mGuardSSHFWsourceIP 1.3.6.1.4.1.15450.2.4.3.3.1.2
The rule's source IP address
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardSSHFWinterface 1.3.6.1.4.1.15450.2.4.3.3.1.3
The network interface the rule belongs to (extern/intern).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER extern(1), intern(2)  

mGuardSSHFWtarget 1.3.6.1.4.1.15450.2.4.3.3.1.4
The target of the rule (accept/reject/drop).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER accept(1), reject(2), drop(3)  

mGuardSSHFWlog 1.3.6.1.4.1.15450.2.4.3.3.1.5
Log packets matching this rule ?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardSSHFWRowStatus 1.3.6.1.4.1.15450.2.4.3.3.1.6
RowStatus
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardSSHFWcomment 1.3.6.1.4.1.15450.2.4.3.3.1.7
Commentary or name for this rule.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardWebInterface 1.3.6.1.4.1.15450.2.4.4
OBJECT IDENTIFIER    

mGuardWebInterfaceLanguage 1.3.6.1.4.1.15450.2.4.4.1
The language used in the web interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER automatic(1), english(2), german(3), japanese(4)  

mGuardWebInterfaceSessionTimeout 1.3.6.1.4.1.15450.2.4.4.2
The session timeout of the web interface in seconds. If no changes are submitted for the specified time, the session is terminated and it will be necessary to log in again before further use of the web interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardWebInterfaceApplyButtonScope 1.3.6.1.4.1.15450.2.4.4.3
The scope of the Apply button in the web interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER page(1), session(2)  

mGuardSysProduct 1.3.6.1.4.1.15450.2.4.9
Manufacturer-defined product identifier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), mGuard-smart-pr(51001), mGuard-core-266(51002), mGuard-smart-gw-266(51003), mGuard-smart-enxl(51011), mGuard-core-533(51012), mGuard-smart-gw-533(51013), mGuard-smart(51020), mGuard-smart-en(51021), mGuard-pci(51030), mGuard-pci-pr(51031), mGuard-pci-en(51032), mGuard-pci-enxl(51033), mGuard-industrial-enfw(51040), mGuard-industrial-enxl(51044), mGuard-blade-en(51052), mGuard-blade-enxl(51053), mGuard-delta(51060), mGuard-delta-en(51062), mGuard-delta-enxl(51063)  

mGuardHardwareInformation 1.3.6.1.4.1.15450.2.4.5
OBJECT IDENTIFIER    

mGuardHardware 1.3.6.1.4.1.15450.2.4.5.1
The hardware of the mGuard.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardCPU 1.3.6.1.4.1.15450.2.4.5.2
The CPU name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardCPUFamily 1.3.6.1.4.1.15450.2.4.5.3
The CPU family.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardCPUStepping 1.3.6.1.4.1.15450.2.4.5.4
The CPU stepping.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardCPUSpeed 1.3.6.1.4.1.15450.2.4.5.5
The CPU speed in MHz.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardSystemTemperature 1.3.6.1.4.1.15450.2.4.5.6
The current system temperature (in degrees Celsius).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardUptime 1.3.6.1.4.1.15450.2.4.5.7
The system uptime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardUSMem 1.3.6.1.4.1.15450.2.4.5.8
The userspace memory.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardMAC1 1.3.6.1.4.1.15450.2.4.5.9
The MAC address of the first network interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardMAC2 1.3.6.1.4.1.15450.2.4.5.10
The MAC address of the second network interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardMAC3 1.3.6.1.4.1.15450.2.4.5.11
The MAC address of the third network interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardSerialNumber 1.3.6.1.4.1.15450.2.4.5.12
The system's serial number .
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardVerParSet 1.3.6.1.4.1.15450.2.4.5.13
The parameterset version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardProductName 1.3.6.1.4.1.15450.2.4.5.14
The product name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardOEMName 1.3.6.1.4.1.15450.2.4.5.15
The name of the OEM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardOEMSerial 1.3.6.1.4.1.15450.2.4.5.16
The OEM serial number .
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardManufacturer 1.3.6.1.4.1.15450.2.4.5.17
The system manufacturer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardManuDate 1.3.6.1.4.1.15450.2.4.5.18
Date of manufacturing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardBootLoader 1.3.6.1.4.1.15450.2.4.5.19
The bootloader used at production .
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardHardwareVersion 1.3.6.1.4.1.15450.2.4.5.20
The hardware version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardRescueSystem 1.3.6.1.4.1.15450.2.4.5.21
The rescue system used at production .
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardProdSoft 1.3.6.1.4.1.15450.2.4.5.22
The software used at production .
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardVersions 1.3.6.1.4.1.15450.2.4.7
OBJECT IDENTIFIER    

mGuardVersion 1.3.6.1.4.1.15450.2.4.7.1
The current version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardBaseVersion 1.3.6.1.4.1.15450.2.4.7.2
The base version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardUpdates 1.3.6.1.4.1.15450.2.4.7.3
Performed updates.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardPackageVersionTable 1.3.6.1.4.1.15450.2.4.7.4
Package descriptions.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardPackageVersionEntry

mGuardPackageVersionEntry 1.3.6.1.4.1.15450.2.4.7.4.1
Description of a single package.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardPackageVersionEntry  

mGuardPkgIndex 1.3.6.1.4.1.15450.2.4.7.4.1.1
Index to identify package.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..250  

mGuardPkgName 1.3.6.1.4.1.15450.2.4.7.4.1.2
Package name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardPkgVerNum 1.3.6.1.4.1.15450.2.4.7.4.1.3
Package version number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardPkgVerVersion 1.3.6.1.4.1.15450.2.4.7.4.1.4
Package version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardPkgVerFlavour 1.3.6.1.4.1.15450.2.4.7.4.1.5
Package flavour.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardAction 1.3.6.1.4.1.15450.2.4.8
If set to 1, the system reboots.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER reboot(1)  

mGuardSNMPenableV3 1.3.6.1.4.1.15450.2.5.1
Should SNMPv3 be enabled ?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardSNMPenableV1 1.3.6.1.4.1.15450.2.5.2
Should SNMPv1 be enabled ?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardSNMPport 1.3.6.1.4.1.15450.2.5.3
The port the snmp agent listens to.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardSNMPv1ROCommunity 1.3.6.1.4.1.15450.2.5.4
Read-only community string for SNMPv1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardSNMPv1RWCommunity 1.3.6.1.4.1.15450.2.5.5
Read-write community string for SNMPv1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardSNMPFWRuleTable 1.3.6.1.4.1.15450.2.5.6
A table containing firewall rules to allow SNMP access.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardSNMPFWRuleEntry

mGuardSNMPFWRuleEntry 1.3.6.1.4.1.15450.2.5.6.1
An entry containing a single firewall rule to allow SNMP access.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardSNMPFWRuleEntry  

mGuardSNMPFWruleIndex 1.3.6.1.4.1.15450.2.5.6.1.1
Index to identify rule.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..100  

mGuardSNMPFWsourceIP 1.3.6.1.4.1.15450.2.5.6.1.2
The rule's source IP address
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardSNMPFWinterface 1.3.6.1.4.1.15450.2.5.6.1.3
The network interface the rule belongs to (extern/intern).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER extern(1), intern(2)  

mGuardSNMPFWtarget 1.3.6.1.4.1.15450.2.5.6.1.4
The target of the rule (accept/reject/drop).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER accept(1), reject(2), drop(3)  

mGuardSNMPFWlog 1.3.6.1.4.1.15450.2.5.6.1.5
Log packets matching this rule ?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardSNMPFWRowStatus 1.3.6.1.4.1.15450.2.5.6.1.6
RowStatus
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardSNMPFWcomment 1.3.6.1.4.1.15450.2.5.6.1.7
Commentary or name for this rule.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardSNMPTrapReceiverTable 1.3.6.1.4.1.15450.2.5.7
Trap messages are sent across a network to an SNMP Network Manager. These messages alert the manager to events occurring within the security gateway or on the network. Up to six simultaneous trap receivers are supported.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardSNMPTrapReceiverEntry

mGuardSNMPTrapReceiverEntry 1.3.6.1.4.1.15450.2.5.7.1
Security gateway's Snmp Trap Receiver Config entry
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardSNMPTrapReceiverEntry  

mGuardSNMPTrapReceiverIndex 1.3.6.1.4.1.15450.2.5.7.1.1
The security gateway's Snmp Trap Receiver Index
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..255  

mGuardSNMPTrapReceiverCommunity 1.3.6.1.4.1.15450.2.5.7.1.2
The security gateway's Snmp Trap Receiver Community Name. This is the SNMP community name of the remote network manager; the name can be up to 16 characters (????), and is case-sensitive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardSNMPTrapReceiverIPAddress 1.3.6.1.4.1.15450.2.5.7.1.3
IP Address - Each IP address parameter is four integer numbers. The numbers range from 0 to 255.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardSNMPTrapReceiverName 1.3.6.1.4.1.15450.2.5.7.1.4
The name of this Trap Receiver entry
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardSNMPTrapReceiverRowStatus 1.3.6.1.4.1.15450.2.5.7.1.5
The security gateway's Snmp Trap Reciever Row Status.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardSNMPTrapConfigGroup 1.3.6.1.4.1.15450.2.5.8
OBJECT IDENTIFIER    

mGuardSNMPAuthenticationTrapFlag 1.3.6.1.4.1.15450.2.5.8.1
Authentication Flag - Enable/Disable SNMP authentication trap.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mGuardSNMPLinkUpDownTrapFlag 1.3.6.1.4.1.15450.2.5.8.2
Link Up/Down Flag - Enable/Disable Link Up/Link Down traps for the entire security gateway.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mGuardSNMPColdStartTrapFlag 1.3.6.1.4.1.15450.2.5.8.3
ColdStart Flag - Enable/Disable SNMP coldstart trap.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mGuardSNMPTrapFlag 1.3.6.1.4.1.15450.2.5.8.4
Enables/Disables the traps with enterprise = mGuardb.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mGuardSNMPChassisTrapFlag 1.3.6.1.4.1.15450.2.5.8.5
Enables/Disables the traps with enterprise = hmChassis.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mGuardSNMPAgentTrapFlag 1.3.6.1.4.1.15450.2.5.8.6
Enables/Disables the traps with enterprise = hmAgent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mGuardSNMPAvFailTrapFlag 1.3.6.1.4.1.15450.2.5.8.7
Enables/Disables the traps with AntiVirus failures (update or engine failures).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mGuardSNMPAvInfoTrapFlag 1.3.6.1.4.1.15450.2.5.8.8
Enables/Disables the traps with informational AntiVirus messages.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mGuardSNMPBladeStateTrapFlag 1.3.6.1.4.1.15450.2.5.8.9
Enables/Disables traps sent at blade status change.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mGuardSNMPBladeConfigTrapFlag 1.3.6.1.4.1.15450.2.5.8.10
Enables/Disables traps sent at automatic blade configuration or backup.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mGuardSNMPRouterRedundancyStatusFlag 1.3.6.1.4.1.15450.2.5.8.11
Enables/Disables traps sent at change of HA state.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mGuardNTPactivate 1.3.6.1.4.1.15450.2.6.1
Activate NTP ?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardNTPtimestamp 1.3.6.1.4.1.15450.2.6.2
Time stamp in filesystem ?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardNTPServerTable 1.3.6.1.4.1.15450.2.6.3
A table of NTP Servers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardNTPServerEntry

mGuardNTPTimezone 1.3.6.1.4.1.15450.2.6.4
Timezone in POSIX.1 notation
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardNTPStatus 1.3.6.1.4.1.15450.2.6.5
NTP state
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardNTPServerEntry 1.3.6.1.4.1.15450.2.6.3.1
A single NTP Server.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardNTPServerEntry  

mGuardNTPServerIndex 1.3.6.1.4.1.15450.2.6.3.1.1
Table index
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..20  

mGuardNTPServerHost 1.3.6.1.4.1.15450.2.6.3.1.2
Hostname or IP address of the NTP Server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardNTPServerRowStatus 1.3.6.1.4.1.15450.2.6.3.1.3
Row status
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardUpdateServerTable 1.3.6.1.4.1.15450.2.7.1
A table of update server repositories.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardUpdateServerEntry

mGuardUpdateServerEntry 1.3.6.1.4.1.15450.2.7.1.1
A single update server repository.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardUpdateServerEntry  

mGuardUpdateServerIndex 1.3.6.1.4.1.15450.2.7.1.1.1
Table index.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..20  

mGuardUpdateServer 1.3.6.1.4.1.15450.2.7.1.1.2
URL of the update server.
Status: deprecated Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardUpdateServerRowStatus 1.3.6.1.4.1.15450.2.7.1.1.3
Row Status
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardUpdateServerProto 1.3.6.1.4.1.15450.2.7.1.1.4
Protocol, either https or http
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardUpdateServerHost 1.3.6.1.4.1.15450.2.7.1.1.5
Hostname of the update server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardUpdateServerLogin 1.3.6.1.4.1.15450.2.7.1.1.6
Login on the update server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardUpdateServerPassword 1.3.6.1.4.1.15450.2.7.1.1.7
Password on the update server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardSNMPError 1.3.6.1.4.1.15450.2.8
Field, providing textual description of errors caused by SNMP operations.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardRouterRedundancy 1.3.6.1.4.1.15450.2.9.2
OBJECT IDENTIFIER    

mGuardRouterRedundancyEnable 1.3.6.1.4.1.15450.2.9.2.1
Enable Router Redundancy.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mGuardRouterRedundancyTrack 1.3.6.1.4.1.15450.2.9.2.2
Run ICMP checks against redundancy peer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mGuardRouterRedundancyInternalID 1.3.6.1.4.1.15450.2.9.2.3
Internal ID of the virtual router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardRouterRedundancyExternalID 1.3.6.1.4.1.15450.2.9.2.4
External ID of the virtual router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardRouterRedundancyPassword 1.3.6.1.4.1.15450.2.9.2.5
Passwort for synchronization between the virtual router peers.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardRouterRedundancyPeerIntern 1.3.6.1.4.1.15450.2.9.2.6
Internal IP of the VR peer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardRouterRedundancyPeerExtern 1.3.6.1.4.1.15450.2.9.2.7
External IP of the VR peer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardRouterRedundancyPriority 1.3.6.1.4.1.15450.2.9.2.8
Priority for the virtual router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardRouterRedundancyVirtIpInt 1.3.6.1.4.1.15450.2.9.2.9
Virtual IP address of the HA cluster for the internal network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardRouterRedundancyVirtIpExt 1.3.6.1.4.1.15450.2.9.2.10
Virtual IP address of the HA cluster for the external network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardRouterRedundancyWantState 1.3.6.1.4.1.15450.2.9.2.11
HA cluster state to start this mGuard with at boot time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER master(1), backup(2)  

mGuardRouterRedExtHostCheckTable 1.3.6.1.4.1.15450.2.9.2.12
A table of hosts to check with ICMP for detecting the VR state.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardRouterRedExtHostCheckEntry

mGuardRouterRedExtHostCheckEntry 1.3.6.1.4.1.15450.2.9.2.12.1
External hosts to check with ICMP for detecting the VR state.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardRouterRedExtHostCheckEntry  

mGuardRouterRedExtHostCheckIndex 1.3.6.1.4.1.15450.2.9.2.12.1.1
Table index.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..100  

mGuardRouterRedExtHostCheckIP 1.3.6.1.4.1.15450.2.9.2.12.1.2
The IP address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardRouterRedExtHostCheckRowSt 1.3.6.1.4.1.15450.2.9.2.12.1.3
Row Status
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardRouterRedIntHostCheckTable 1.3.6.1.4.1.15450.2.9.2.13
A table of hosts to check with ICMP for detecting the VR state.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardRouterRedIntHostCheckEntry

mGuardRouterRedIntHostCheckEntry 1.3.6.1.4.1.15450.2.9.2.13.1
External hosts to check with ICMP for detecting the VR state.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardRouterRedIntHostCheckEntry  

mGuardRouterRedIntHostCheckIndex 1.3.6.1.4.1.15450.2.9.2.13.1.1
Table index.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..100  

mGuardRouterRedIntHostCheckIP 1.3.6.1.4.1.15450.2.9.2.13.1.2
The IP address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardRouterRedIntHostCheckRowSt 1.3.6.1.4.1.15450.2.9.2.13.1.3
Row Status
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardRouterRedundancyState 1.3.6.1.4.1.15450.2.9.2.14
Current HA cluster state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER backup(1), master(2), fault(3), disabled(4)  

mGuardHTTPSLastAccessIP 1.3.6.1.4.1.15450.2.10.1
Address of the last IP from which a wrong authentication information was sent for HTTPS access was sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

mGuardShellLastAccessIP 1.3.6.1.4.1.15450.2.10.2
Address of the last IP from which a login event occured.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

mGuardDHCPLastAccessMAC 1.3.6.1.4.1.15450.2.10.3
MAC Address of the last unknown client trying to obtain a lease.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

mGuardTrapResources 1.3.6.1.4.1.15450.2.10.4
OBJECT IDENTIFIER    

mGuardTResDiscFull 1.3.6.1.4.1.15450.2.10.4.1
Status of file system free space. If multiple file systems, the worst state is used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER free(1), tight(2), full(3)  

mGuardTResCpuLoadHigh 1.3.6.1.4.1.15450.2.10.4.2
CPU load (uptime*10).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mGuardTResMemoryFull 1.3.6.1.4.1.15450.2.10.4.3
Free memory (RAM) in KiByte.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mGuardTResColdstart 1.3.6.1.4.1.15450.2.10.4.4
Trap sent when system rebooted (snmp daemon started).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mGuardTResAV 1.3.6.1.4.1.15450.2.10.4.6
OBJECT IDENTIFIER    

mGuardTResAvUpdateDone 1.3.6.1.4.1.15450.2.10.4.6.1
AV Update was performed successfully.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardTResAvUpdateError 1.3.6.1.4.1.15450.2.10.4.6.2
Error when performing AV Update.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardTResAvVirusDetected 1.3.6.1.4.1.15450.2.10.4.6.3
AV found a virus.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardTResAvFileNotScanned 1.3.6.1.4.1.15450.2.10.4.6.4
The file was not scanned for viruses.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardTResAvFailed 1.3.6.1.4.1.15450.2.10.4.6.5
General AV failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardTResPlatformSpecific 1.3.6.1.4.1.15450.2.10.4.7
OBJECT IDENTIFIER    

mGuardTResIndustrial 1.3.6.1.4.1.15450.2.10.4.7.1
OBJECT IDENTIFIER    

mGuardTResIndustrialPower 1.3.6.1.4.1.15450.2.10.4.7.1.1
OBJECT IDENTIFIER    

mGuardTResIndustrialTemperature 1.3.6.1.4.1.15450.2.10.4.7.1.2
OBJECT IDENTIFIER    

mGuardPSTable 1.3.6.1.4.1.15450.2.10.4.7.1.1.2
This table contains all variables related to the power supply units of the chassis/switch. For each power supply slot exists one instance.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MguardPSEntry

mGuardPSEntry 1.3.6.1.4.1.15450.2.10.4.7.1.1.2.1
Power supply entry
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MguardPSEntry  

mGuardPSSysID 1.3.6.1.4.1.15450.2.10.4.7.1.1.2.1.1
The value of SysID is assigned so as to uniquely identify a chassis/switch among the subordinate managed objects of the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..100  

mGuardPSID 1.3.6.1.4.1.15450.2.10.4.7.1.1.2.1.2
This Index is used to identify the associated power supply unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..100  

mGuardPSState 1.3.6.1.4.1.15450.2.10.4.7.1.1.2.1.3
Indicates the operational state of the associated power supply. If the value of this variable changes, a mGuardPowerSupply trap is sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), failed(2), notInstalled(3), unknown(4)  

mGuardTResIndustrialTempHiLimit 1.3.6.1.4.1.15450.2.10.4.7.1.2.2
Upper limit of allowed system temperature.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardTResIndustrialTempLowLimit 1.3.6.1.4.1.15450.2.10.4.7.1.2.3
Lower limit of allowed system temperature.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardTResAutoConfigAdapterState 1.3.6.1.4.1.15450.2.10.4.7.1.4
Trap sent when ACA was accessed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notPresent(1), removed(2), ok(3), notInSync(4), outOfMemory(5), wrongMachine(6), checksumErr(7), genericErr(8)  

mGuardTResSignalRelais 1.3.6.1.4.1.15450.2.10.4.7.1.3
OBJECT IDENTIFIER    

mGuardTResSignalRelaisState 1.3.6.1.4.1.15450.2.10.4.7.1.3.1
Current state of the signal relais (1=on, 2=off).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mGuardTResSignalRelaisReason 1.3.6.1.4.1.15450.2.10.4.7.1.3.2
Reason why the signal relais was triggered.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

mGuardTResSignalRelaisReasonIdx 1.3.6.1.4.1.15450.2.10.4.7.1.3.3
Reason number (ue0=1, ue1=2, number of TX bytes for eth).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mGuardTResSignalRelaisPowerAlarm 1.3.6.1.4.1.15450.2.10.4.7.1.3.4
Enables/disables an alarm for the signalling relay of the powersupply state.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mGuardTResSignalRelaisMode 1.3.6.1.4.1.15450.2.10.4.7.1.3.5
When set to standard, this is the default, the signalling relay shows the state of hmRS2SigRelayState. When set to manual, the relay is controlled by the configured Manual State.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER standard(1), manual(2)  

mGuardTResSignalRelaisManualStat 1.3.6.1.4.1.15450.2.10.4.7.1.3.6
When set to on, this is the default, the signalling relay is opened. When set to off the relay is closed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

mGuardTResSignalLinkTable 1.3.6.1.4.1.15450.2.10.4.7.1.5
OBJECT IDENTIFIER    

mGuardTResSigLinkID 1.3.6.1.4.1.15450.2.10.4.7.1.5.1
This index is used to identify the associated link and corresponds with ifMauIfIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..7  

mGuardTResSigLinkAlarm 1.3.6.1.4.1.15450.2.10.4.7.1.5.2
DURABLE: { off:all } Indicates whether an alarm for the signalling relay of the associated link will be produced or not, so you can mask the value of ifMauMediaAvailable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

mGuardTResBladeCTRL 1.3.6.1.4.1.15450.2.10.4.7.2
OBJECT IDENTIFIER    

mGuardTResBladeInfo 1.3.6.1.4.1.15450.2.10.4.7.2.1
OBJECT IDENTIFIER    

mGuardTResBladeCtrlCfg 1.3.6.1.4.1.15450.2.10.4.7.2.5
OBJECT IDENTIFIER    

mGuardTResBladeRackID 1.3.6.1.4.1.15450.2.10.4.7.2.1.1
Rack ID in question when sending a Blade-related SNMP trap.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardTResBladeSlotNr 1.3.6.1.4.1.15450.2.10.4.7.2.1.2
Slot ID in question when sending a Blade-related SNMP trap.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mGuardTResBladeCtrlPowerStatus 1.3.6.1.4.1.15450.2.10.4.7.2.2
Status of the BladePack's power supplies when sending an SNMP trap.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER absent(1), present(2), online(3)  

mGuardTResBladeCtrlRunStatus 1.3.6.1.4.1.15450.2.10.4.7.2.3
Status of the Blade's run status when sending an SNMP trap.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER absent(1), present(2), online(3)  

mGuardTResBladeCtrlCfgBackup 1.3.6.1.4.1.15450.2.10.4.7.2.5.1
Reason/details for configuration backup to Blade CTRL when sending an SNMP trap.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER downloaded(3)  

mGuardTResBladeCtrlCfgRestored 1.3.6.1.4.1.15450.2.10.4.7.2.5.2
Reason for configuration restore from Blade CTRL when sending an SNMP trap.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER automatic(1), manual(2)  

mGuardTResRedundancy 1.3.6.1.4.1.15450.2.10.4.8
OBJECT IDENTIFIER    

mGuardTResRedundacyReason 1.3.6.1.4.1.15450.2.10.4.8.1
Reason for redundancy status change.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardTResRedundacyBackupDown 1.3.6.1.4.1.15450.2.10.4.8.2
Information sent by Master device when Backup device is not reachable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardLoggingRemoteActivate 1.3.6.1.4.1.15450.2.11.1
Activate remote logging?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardLoggingRemoteIP 1.3.6.1.4.1.15450.2.11.2
IP address of the remote log server
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mGuardLoggingRemotePort 1.3.6.1.4.1.15450.2.11.3
UDP port of the remote logging service
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardContFiltAVP 1.3.6.1.4.1.15450.2.12.1
OBJECT IDENTIFIER    

mGuardContFiltHTTP 1.3.6.1.4.1.15450.2.12.2
OBJECT IDENTIFIER    

mGuardContFiltPOP3 1.3.6.1.4.1.15450.2.12.3
OBJECT IDENTIFIER    

mGuardContFiltSMTP 1.3.6.1.4.1.15450.2.12.4
OBJECT IDENTIFIER    

mGuardContFiltFTP 1.3.6.1.4.1.15450.2.12.5
OBJECT IDENTIFIER    

mGuardContFiltAVPSchedule 1.3.6.1.4.1.15450.2.12.1.1
The period used when updating the antivirus database
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER never(1), onboot(2), quarterhourly(15), halfhourly(30), hourly(60), bihourly(120), triplehourly(360), sixhourly(720), twicedayly(1440)  

mGuardContFiltAVPServerTable 1.3.6.1.4.1.15450.2.12.1.2
A table of update server repositories.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardContFiltAVPServerEntry

mGuardContFiltAVPServerEntry 1.3.6.1.4.1.15450.2.12.1.2.1
A single update server repository.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardContFiltAVPServerEntry  

mGuardContFiltAVPServerIndex 1.3.6.1.4.1.15450.2.12.1.2.1.1
Table index.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..100  

mGuardContFiltAVPServerURL 1.3.6.1.4.1.15450.2.12.1.2.1.2
URL of the update server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardContFiltAVPServerRowStatus 1.3.6.1.4.1.15450.2.12.1.2.1.3
Row Status
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardContFiltAVPHTTPProxy 1.3.6.1.4.1.15450.2.12.1.3
OBJECT IDENTIFIER    

mGuardContFiltAVPHTTPProxyLogin 1.3.6.1.4.1.15450.2.12.1.3.1
Login for a HTTP proxy for retrival of anti-virus patterns.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardContFiltAVPHTTPProxyPasswd 1.3.6.1.4.1.15450.2.12.1.3.2
Password for mGuardContFiltAVPHTTPProxyLogin.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardContFiltAVPHTTPProxyServer 1.3.6.1.4.1.15450.2.12.1.3.3
Hostname or IP of an HTTP proxy for retrival of anti-virus patterns.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardContFiltAVPHTTPProxyPort 1.3.6.1.4.1.15450.2.12.1.3.4
Port of an HTTP proxy for retrival of anti-virus patterns, eg. 3128.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardContFiltAVPLogLevel 1.3.6.1.4.1.15450.2.12.1.5
AVP log detail level with 0 lowest 5 highest, defaults to 2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..5  

mGuardContFiltAVPMaxConnections 1.3.6.1.4.1.15450.2.12.1.6
Maximum number of connections the AVP will handle.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardContFiltAVPScanTimeout 1.3.6.1.4.1.15450.2.12.1.7
Maximum time the protocol wrapper will wait for the scan engine in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardContFiltAVPpass 1.3.6.1.4.1.15450.2.12.1.8
OBJECT IDENTIFIER    

mGuardContFiltAVPpassCorrupt 1.3.6.1.4.1.15450.2.12.1.8.1
Let corrupt (archive) files pass, treat them as not virus infected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardContFiltAVPpassEncrypted 1.3.6.1.4.1.15450.2.12.1.8.2
Let encrypted files pass, treat them as not virus infected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardContFiltAVPpassSuspicious 1.3.6.1.4.1.15450.2.12.1.8.3
Let suspicious files (e.g. known spyware) pass, treat them as not virus infected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardContFiltAVPpassWarnings 1.3.6.1.4.1.15450.2.12.1.8.4
Let files pass that triggered a warning, treat them as not virus infected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardContFiltQuarantine 1.3.6.1.4.1.15450.2.12.1.9
OBJECT IDENTIFIER    

mGuardContFiltQuarantineClean 1.3.6.1.4.1.15450.2.12.1.9.1
Send clean files to quarantine server for debugging (warning: do not violate privacy law with this option!).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardContFiltQuarantineError 1.3.6.1.4.1.15450.2.12.1.9.2
Send files producing an error to quarantine server for debugging (warning: do not violate privacy law with this option!).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardContFiltQuarantineVirus 1.3.6.1.4.1.15450.2.12.1.9.3
Send files found to be infected to quarantine server for debugging (warning: do not violate privacy law with this option!).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardContFiltQuarantineSrvIP 1.3.6.1.4.1.15450.2.12.1.9.4
IP Address of the quarantine server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardContFiltQuarantineSrvPort 1.3.6.1.4.1.15450.2.12.1.9.5
Port used for/on the quarantine server (Innominate Quarantine Server Protocol).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardContFiltInfo 1.3.6.1.4.1.15450.2.12.1.10
OBJECT IDENTIFIER    

mGuardContFiltInfoFlashID 1.3.6.1.4.1.15450.2.12.1.10.1
Flash ID of the device to be used for license handling.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardContFiltHTTPEnable 1.3.6.1.4.1.15450.2.12.2.1
Enable HTTP procotol proxy
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mGuardContFiltHTTPVirusAction 1.3.6.1.4.1.15450.2.12.2.2
Action to take on virus detection
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER error(1)  

mGuardContFiltHTTPMaxSize 1.3.6.1.4.1.15450.2.12.2.3
Maximum object size to be handled (actually sizes may depend on software version and underlying hardware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dottwomeg(200000), dotfivemeg(500000), onemeg(1000000), twomeg(2000000), fourmeg(4000000), fivemeg(5000000), eightmeg(8000000), tenmeg(10000000)  

mGuardContFiltHTTPExceedAction 1.3.6.1.4.1.15450.2.12.2.4
Action to take if an object exceeds the maximum handled size
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER block(1), pass(2)  

mGuardContFiltHTTPSrvrTable 1.3.6.1.4.1.15450.2.12.2.5
A table of update server repositories.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardContFiltHTTPSrvrEntry

mGuardContFiltHTTPSrvrEntry 1.3.6.1.4.1.15450.2.12.2.5.1
A single update server repository.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardContFiltHTTPSrvrEntry  

mGuardContFiltHTTPSrvrIndex 1.3.6.1.4.1.15450.2.12.2.5.1.1
Table index.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..100  

mGuardContFiltHTTPSrvrIP 1.3.6.1.4.1.15450.2.12.2.5.1.2
IP address expression for http server(s).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardContFiltHTTPSrvrPort 1.3.6.1.4.1.15450.2.12.2.5.1.3
Port the HTTP server listens to..
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardContFiltHTTPSrvrScanAction 1.3.6.1.4.1.15450.2.12.2.5.1.4
Action to be taken when contacting respective servers.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER scan(1), noscan(2)  

mGuardContFiltHTTPSrvrRowStatus 1.3.6.1.4.1.15450.2.12.2.5.1.5
Row Status
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardContFiltHTTPSrvrComment 1.3.6.1.4.1.15450.2.12.2.5.1.6
Comment for this rule.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardContFiltPOP3Enable 1.3.6.1.4.1.15450.2.12.3.1
Enable POP3 procotol proxy
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mGuardContFiltPOP3VirusAction 1.3.6.1.4.1.15450.2.12.3.2
Action to take on virus detection
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER error(1), mail(2)  

mGuardContFiltPOP3MaxSize 1.3.6.1.4.1.15450.2.12.3.3
Maximum object size to be handled (actually sizes may depend on software version and underlying hardware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dottwomeg(200000), dotfivemeg(500000), onemeg(1000000), twomeg(2000000), fourmeg(4000000), fivemeg(5000000), eightmeg(8000000), tenmeg(10000000)  

mGuardContFiltPOP3ExceedAction 1.3.6.1.4.1.15450.2.12.3.4
Action to take if an object exceeds the maximum handled size
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER block(1), pass(2)  

mGuardContFiltPOP3SrvrTable 1.3.6.1.4.1.15450.2.12.3.5
A table of update server repositories.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardContFiltPOP3SrvrEntry

mGuardContFiltPOP3SrvrEntry 1.3.6.1.4.1.15450.2.12.3.5.1
A single update server repository.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardContFiltPOP3SrvrEntry  

mGuardContFiltPOP3SrvrIndex 1.3.6.1.4.1.15450.2.12.3.5.1.1
Table index.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..100  

mGuardContFiltPOP3SrvrIP 1.3.6.1.4.1.15450.2.12.3.5.1.2
IP address expression for pop3 server(s).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardContFiltPOP3SrvrPort 1.3.6.1.4.1.15450.2.12.3.5.1.3
Port expression for pop3 server(s).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardContFiltPOP3SrvrScanAction 1.3.6.1.4.1.15450.2.12.3.5.1.4
Action to be taken when contacting respective servers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER scan(1), noscan(2)  

mGuardContFiltPOP3SrvrRowStatus 1.3.6.1.4.1.15450.2.12.3.5.1.5
Row Status
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardContFiltPOP3SrvrComment 1.3.6.1.4.1.15450.2.12.3.5.1.6
Comment for this rule.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardContFiltSMTPEnable 1.3.6.1.4.1.15450.2.12.4.1
Enable SMTP procotol proxy
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mGuardContFiltSMTPVirusAction 1.3.6.1.4.1.15450.2.12.4.2
Action to take on virus detection
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER error(1)  

mGuardContFiltSMTPMaxSize 1.3.6.1.4.1.15450.2.12.4.3
Maximum object size to be handled (actually sizes may depend on software version and underlying hardware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dottwomeg(200000), dotfivemeg(500000), onemeg(1000000), twomeg(2000000), fourmeg(4000000), fivemeg(5000000), eightmeg(8000000), tenmeg(10000000)  

mGuardContFiltSMTPExceedAction 1.3.6.1.4.1.15450.2.12.4.4
Action to take if an object exceeds the maximum handled size
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER block(1), pass(2)  

mGuardContFiltSMTPSrvrTable 1.3.6.1.4.1.15450.2.12.4.5
A table of update server repositories.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardContFiltSMTPSrvrEntry

mGuardContFiltSMTPSrvrEntry 1.3.6.1.4.1.15450.2.12.4.5.1
A single update server repository.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardContFiltSMTPSrvrEntry  

mGuardContFiltSMTPSrvrIndex 1.3.6.1.4.1.15450.2.12.4.5.1.1
Table index.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..100  

mGuardContFiltSMTPSrvrIP 1.3.6.1.4.1.15450.2.12.4.5.1.2
IP address expression for smtp server(s).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardContFiltSMTPSrvrPort 1.3.6.1.4.1.15450.2.12.4.5.1.3
Port expression for smtp server(s).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardContFiltSMTPSrvrScanAction 1.3.6.1.4.1.15450.2.12.4.5.1.4
Action to be taken when contacting respective servers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER scan(1), noscan(2)  

mGuardContFiltSMTPSrvrRowStatus 1.3.6.1.4.1.15450.2.12.4.5.1.5
Row Status
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardContFiltSMTPSrvrComment 1.3.6.1.4.1.15450.2.12.4.5.1.6
Comment for this rule.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardContFiltFTPEnable 1.3.6.1.4.1.15450.2.12.5.1
Enable FTP procotol proxy
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mGuardContFiltFTPVirusAction 1.3.6.1.4.1.15450.2.12.5.2
Action to take on virus detection
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER error(1)  

mGuardContFiltFTPMaxSize 1.3.6.1.4.1.15450.2.12.5.3
Maximum object size to be handled (actually sizes may depend on software version and underlying hardware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dottwomeg(200000), dotfivemeg(500000), onemeg(1000000), twomeg(2000000), fourmeg(4000000), fivemeg(5000000), eightmeg(8000000), tenmeg(10000000)  

mGuardContFiltFTPExceedAction 1.3.6.1.4.1.15450.2.12.5.4
Action to take if an object exceeds the maximum handled size
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER block(1), pass(2)  

mGuardContFiltFTPSrvrTable 1.3.6.1.4.1.15450.2.12.5.5
A table of update server repositories.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardContFiltFTPSrvrEntry

mGuardContFiltFTPSrvrEntry 1.3.6.1.4.1.15450.2.12.5.5.1
A single update server repository.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardContFiltFTPSrvrEntry  

mGuardContFiltFTPSrvrIndex 1.3.6.1.4.1.15450.2.12.5.5.1.1
Table index.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..100  

mGuardContFiltFTPSrvrIP 1.3.6.1.4.1.15450.2.12.5.5.1.2
IP address expression for smtp server(s).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardContFiltFTPSrvrPort 1.3.6.1.4.1.15450.2.12.5.5.1.3
Port expression for smtp server(s).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardContFiltFTPSrvrScanAction 1.3.6.1.4.1.15450.2.12.5.5.1.4
Action to be taken when contacting respective servers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER scan(1), noscan(2)  

mGuardContFiltFTPSrvrRowStatus 1.3.6.1.4.1.15450.2.12.5.5.1.5
Row Status
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardContFiltFTPSrvrComment 1.3.6.1.4.1.15450.2.12.5.5.1.6
Comment for this rule.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardBladeRackID 1.3.6.1.4.1.15450.2.13.1
Blade rack ID, read-only on a blade, read-write on a controller
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mGuardBladeSlotID 1.3.6.1.4.1.15450.2.13.2
Blade slot ID, slot ID in a mGuard Rack
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

mGuardBladeCtrlTable 1.3.6.1.4.1.15450.2.13.3
Overview of controlled blades.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardBladeCtrlEntry

mGuardBladeCtrlEntry 1.3.6.1.4.1.15450.2.13.3.1
A single update server repository.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardBladeCtrlEntry  

mGuardBladeCtrlIndex 1.3.6.1.4.1.15450.2.13.3.1.1
Table index.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..100  

mGuardBladeCtrlDevice 1.3.6.1.4.1.15450.2.13.3.1.2
The name of the device inside the slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardBladeCtrlStatus 1.3.6.1.4.1.15450.2.13.3.1.3
The status of the blade/slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER absent(1), present(2), online(3)  

mGuardBladeCtrlAVRRevision 1.3.6.1.4.1.15450.2.13.3.1.4
The AVR revision of the blades bus controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardBladeCtrlSlotID 1.3.6.1.4.1.15450.2.13.3.1.5
The blades slot ID, as seen by the blade.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardBladeCtrlProductID 1.3.6.1.4.1.15450.2.13.3.1.6
The blades product ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardBladeCtrlAssemblyID 1.3.6.1.4.1.15450.2.13.3.1.7
The blades assembly ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardBladeCtrlSerial 1.3.6.1.4.1.15450.2.13.3.1.8
The blades serial number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardBladeCtrlFlashID 1.3.6.1.4.1.15450.2.13.3.1.9
The blades Flash ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardBladeCtrlVersion 1.3.6.1.4.1.15450.2.13.3.1.10
The blades software version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mGuardBladeCtrlBackup 1.3.6.1.4.1.15450.2.13.3.1.11
Wether to automatically pull the configuration off the blade/slot.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardBladeCtrlRestore 1.3.6.1.4.1.15450.2.13.3.1.12
Wether to automatically push the configuration to the blade freshly inserted into the slot.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mGuardBladePwrTable 1.3.6.1.4.1.15450.2.13.4
Overview of controlled power supplies.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardBladePwrEntry

mGuardBladePwrEntry 1.3.6.1.4.1.15450.2.13.4.1
Table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardBladePwrEntry  

mGuardBladePwrIndex 1.3.6.1.4.1.15450.2.13.4.1.1
Table index.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..100  

mGuardBladePwrStatus 1.3.6.1.4.1.15450.2.13.4.1.2
Status of the power supply.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER absent(1), fatal(2), defect(3), ok(4)  

mGuardProfilePush 1.3.6.1.4.1.15450.2.14.1
OBJECT IDENTIFIER    

mGuardProfilePull 1.3.6.1.4.1.15450.2.14.2
OBJECT IDENTIFIER    

mGuardProfilePullSchedule 1.3.6.1.4.1.15450.2.14.2.1
The period used when polling remote configuration profiles.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER never(1), onboot(2), quarterhourly(15), halfhourly(30), hourly(60), bihourly(120), triplehourly(360), sixhourly(720), twicedayly(1440)  

mGuardProfilePullHTTPS 1.3.6.1.4.1.15450.2.14.2.2
OBJECT IDENTIFIER    

mGuardProfilePullHTTPSCert 1.3.6.1.4.1.15450.2.14.2.2.1
X.509 Certificate of the HTTPS server to pull configuration profiles from. This used to authenticate the HTTPS server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardProfilePullHTTPSServer 1.3.6.1.4.1.15450.2.14.2.2.2
Hostname or IP of the HTTPS server to pull configuration profiles from.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardProfilePullHTTPSPort 1.3.6.1.4.1.15450.2.14.2.2.3
Port of the HTTPS server to pull configuration profiles from. Usually 443.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardProfilePullHTTPSFile 1.3.6.1.4.1.15450.2.14.2.2.4
Filename of the configuration to pull. Default is an empty name, in which case the serialnumber with the extension '.atv' is used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardProfilePullHTTPSLogin 1.3.6.1.4.1.15450.2.14.2.2.5
Login on the HTTPS server to pull configuration profiles from.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardProfilePullHTTPSPasswd 1.3.6.1.4.1.15450.2.14.2.2.6
Password on the HTTPS server to pull configuration profiles from.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardProfilePullHTTPSDirectory 1.3.6.1.4.1.15450.2.14.2.2.7
Directory on the HTTPS server to pull configuration profiles from.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardRemoteUsers 1.3.6.1.4.1.15450.2.15.1
OBJECT IDENTIFIER    

mGuardRADIUS 1.3.6.1.4.1.15450.2.15.1.1
OBJECT IDENTIFIER    

mGuardRADIUSTimeout 1.3.6.1.4.1.15450.2.15.1.1.1
Time to wait before deciding that a RADIUS server has not responded to a request.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..100  

mGuardRADIUSRetries 1.3.6.1.4.1.15450.2.15.1.1.2
The number of packets of sent to a RADIUS server before giving up.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..100  

mGuardRADIUSServerTable 1.3.6.1.4.1.15450.2.15.1.1.3
A table containing RADIUS servers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardRADIUSServerEntry

mGuardRADIUSServerEntry 1.3.6.1.4.1.15450.2.15.1.1.3.1
An entry containing a single RADIUS server.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardRADIUSServerEntry  

mGuardRADIUSServerIndex 1.3.6.1.4.1.15450.2.15.1.1.3.1.1
Index to identify RADIUS server entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..100  

mGuardRADIUSServerHostname 1.3.6.1.4.1.15450.2.15.1.1.3.1.2
The hostname or IP address of the RADIUS server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardRADIUSServerPort 1.3.6.1.4.1.15450.2.15.1.1.3.1.3
The port number of the RADIUS server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

mGuardRADIUSServerSecret 1.3.6.1.4.1.15450.2.15.1.1.3.1.4
The secret shared with the RADIUS server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardRADIUSServerRowStatus 1.3.6.1.4.1.15450.2.15.1.1.3.1.5
Row Status
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardUserFWUsers 1.3.6.1.4.1.15450.2.15.1.2
OBJECT IDENTIFIER    

mGuardUserFWUserTable 1.3.6.1.4.1.15450.2.15.1.2.1
A table containing user firewall users.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGuardUserFWUserEntry

mGuardUserFWUserEntry 1.3.6.1.4.1.15450.2.15.1.2.1.1
An entry containing a single user firewall user.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MGuardUserFWUserEntry  

mGuardUserFWUserIndex 1.3.6.1.4.1.15450.2.15.1.2.1.1.1
Index to identify the user firewall user entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..100  

mGuardUserFWUserName 1.3.6.1.4.1.15450.2.15.1.2.1.1.2
The username of the user firewall user entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardUserFWUserAuthMethod 1.3.6.1.4.1.15450.2.15.1.2.1.1.3
The authentication method of the user firewall user entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER radius(1), local(2)  

mGuardUserFWUserPassword 1.3.6.1.4.1.15450.2.15.1.2.1.1.4
The password of the user firewall user entry. The password can be set, but not obtained. If the variable is read, a * character is returned.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mGuardUserFWUserRowStatus 1.3.6.1.4.1.15450.2.15.1.2.1.1.5
Row Status
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

mGuardTraps 1.3.6.1.4.1.15450.2.10.5
OBJECT IDENTIFIER    

mGuardTrapDiscFull 1
Status of file system free space. If multiple file systems, the worst state is used.
TRAP-TYPE    

mGuardTrapCpuLoadHigh 2
CPU load above 1.
TRAP-TYPE    

mGuardTrapMemoryFull 3
Free memory (RAM) low.
TRAP-TYPE    

mGuardTrapColdstart 4
Trap sent when system rebooted (snmp daemon started).
TRAP-TYPE    

mGuardHTTPSLoginTrap 1
This trap is sent when someone is trying to open a HTTPS session using the wrong password. mGuardHTTPSLastAccessIP contains the IP address of the last unsuccessfull login request.
TRAP-TYPE    

mGuardShellLoginTrap 2
This trap is sent when someone opens the shell through SSH or serial console. mGuardShellAccessLastIP contains the IP address of the login request. The value of mGuardShellAccessLastIP is 0.0.0.0, if the request was sent via serial console.
TRAP-TYPE    

mGuardDHCPNewClientTrap 3
This trap is sent when a DHCP request was received from an unknown client
TRAP-TYPE    

mGuardTrapAV 1.3.6.1.4.1.15450.2.10.6
OBJECT IDENTIFIER    

mGuardTrapAvUpdateDone 1
AV Update was performed successfully.
TRAP-TYPE    

mGuardTrapAvUpdateError 2
Error when performing AV Update.
TRAP-TYPE    

mGuardTrapAvVirusDetected 3
AV found a virus.
TRAP-TYPE    

mGuardTrapAvFileNotScanned 4
The file was not scanned for viruses.
TRAP-TYPE    

mGuardTrapAvFailed 5
General AV failure.
TRAP-TYPE    

mGuardTrapPlatformSpecific 1.3.6.1.4.1.15450.2.10.7
OBJECT IDENTIFIER    

mGuardTrapIndustrial 1.3.6.1.4.1.15450.2.10.7.1
OBJECT IDENTIFIER    

mGuardTrapIndustrialPowerStatus 2
Trap sent when power supply failure was detected.
TRAP-TYPE    

mGuardTrapIndustrialTemperature 1
Trap reporting temperature exceeding the given limits.
TRAP-TYPE    

mGuardTrapSignalRelais 3
Current state of the signal relais changed (0=off, 1=on).
TRAP-TYPE    

mGuardTrapAutoConfigAdapterState 4
Trap sent when ACA was accessed.
TRAP-TYPE    

mGuardTrapBladeCTRL 1.3.6.1.4.1.15450.2.10.7.2
OBJECT IDENTIFIER    

mGuardTrapBladeCtrlCfg 1.3.6.1.4.1.15450.2.10.7.2.5
OBJECT IDENTIFIER    

mGuardTrapBladeCtrlPowerStatus 2
BladePack's power supplies status changed.
TRAP-TYPE    

mGuardTrapBladeCtrlRunStatus 3
Blade's run status changed.
TRAP-TYPE    

mGuardTrapBladeCtrlCfgBackup 1
Configuration backup to Blade CTRL is triggered.
TRAP-TYPE    

mGuardTrapBladeCtrlCfgRestored 2
Configuration restore from Blade CTRL is triggered.
TRAP-TYPE    

mGuardTrapRouterRedundancy 1.3.6.1.4.1.15450.2.10.8
OBJECT IDENTIFIER    

mGuardTrapRouterRedundancyStatusChange 1
Current HA cluster state changed.
TRAP-TYPE    

mGuardTrapRouterRedundancyBackupDown 2
Backup device is not reachable by Master device (This trap is only sent, when ICMP checks are activated).
TRAP-TYPE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor