MELLANOX-IF-VPI-MIB

Imported modules

MellanoxIfVPIEntry
SEQUENCE
	mellanoxIfVPIIndex	Integer32
	mellanoxIfVPIIbPortPhysicalState	INTEGER
	mellanoxIfVPIIbPortLogicalState	INTEGER
	mellanoxIfVPIIbPortGuid	DisplayString
	mellanoxIfVPIPortXmitWait	Counter64
	mellanoxIfVPISymbolErrorCounter	Counter64
	mellanoxIfVPIPortAdminSpeed	Gauge32
	mellanoxIfVPISubnetName	DisplayString
	mellanoxIfVPISubnetPrefix	DisplayString
	mellanoxIfVPIIbLocalIdentifier	Integer32
	mellanoxIfVPI64bytePkts	Counter64
	mellanoxIfVPI65to127bytePkts	Counter64
	mellanoxIfVPI128to255bytePkts	Counter64
	mellanoxIfVPI256to511bytePkts	Counter64
	mellanoxIfVPI512to1023bytePkts	Counter64
	mellanoxIfVPI1024to1518bytePkts	Counter64
	mellanoxIfVPIJumboPkts	Counter64
	mellanoxIfVPIUndersizedPkts	Counter64
	mellanoxIfVPIOversizedPkts	Counter64
	mellanoxIfVPIUnknownControlOpcode	Counter64
	mellanoxIfVPIFCSErrors	Counter64

mellanoxIfVPIIndex		1.3.6.1.4.1.33049.3.1.1.1.1
The index of this table (taken from System II ifIndex)
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

mellanoxIfVPIIbPortPhysicalState		1.3.6.1.4.1.33049.3.1.1.1.2
Infiniband Port physical state
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	noStateChange(0), sleep(1), polling(2), disabled(3), portConfigurationTraining(4), linkUp(5), linkErrorRecovery(6), phyTest(7), notAvailable(100)

mellanoxIfVPIIbPortLogicalState		1.3.6.1.4.1.33049.3.1.1.1.3
Infiniband Port logical state
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	noState(0), down(1), initialize(2), armed(3), active(4), notAvailable(100)

mellanoxIfVPIIbPortGuid		1.3.6.1.4.1.33049.3.1.1.1.4
Infiniband PortGuid (64 bits length) - Value shall differ for each end port on a CA or router , but the same for all ports of a switch.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

mellanoxIfVPIPortXmitWait		1.3.6.1.4.1.33049.3.1.1.1.5
A VPI counter. The number of ticks during which the port selected by PortSelect had data to transmit but no data was sent during the entire tick either because of insufficient credits or because of lack of arbitration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

mellanoxIfVPISymbolErrorCounter		1.3.6.1.4.1.33049.3.1.1.1.6
A VPI counter Total number of minor link errors detected on one or more physical lanes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

mellanoxIfVPIPortAdminSpeed		1.3.6.1.4.1.33049.3.1.1.1.7
The interface's configured bandwidth in units of 1,000,000 bits per second. This value is represented in a similar way to the ifHighSpeed column in IF-MIB.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

mellanoxIfVPISubnetName		1.3.6.1.4.1.33049.3.1.1.1.8
This field will only be used in IB router systems. For mapped IB ports, this field will display the name of the subnet the port is mapped to. For L3 IB interfaces: the name assigned to them. In other cases: An empty string will be displayed
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

mellanoxIfVPISubnetPrefix		1.3.6.1.4.1.33049.3.1.1.1.9
This field will only be used in IB systems. For L2 IB ports: the prefix of the subnet the port is mapped to. For L3 IB interfaces: the prefix assigned to them. In other cases: An empty string will be displayed.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

mellanoxIfVPIIbLocalIdentifier		1.3.6.1.4.1.33049.3.1.1.1.10
This field will only be used in L3 interfaces on IB router systems. For L3 IB interfaces, this field will display the local identifier (lid) of the subnet. In other cases: 0 will be displayed.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

mellanoxIfVPI64bytePkts		1.3.6.1.4.1.33049.3.1.1.1.11
Total number of packets with a length of 64 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

mellanoxIfVPI65to127bytePkts		1.3.6.1.4.1.33049.3.1.1.1.12
Total number of packets with a length between 65 and 127 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

mellanoxIfVPI128to255bytePkts		1.3.6.1.4.1.33049.3.1.1.1.13
Total number of packets with a length between 128 and 255 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

mellanoxIfVPI256to511bytePkts		1.3.6.1.4.1.33049.3.1.1.1.14
Total number of packets with a length between 256 and 511 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

mellanoxIfVPI512to1023bytePkts		1.3.6.1.4.1.33049.3.1.1.1.15
Total number of packets with a length between 512 and 1023 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

mellanoxIfVPI1024to1518bytePkts		1.3.6.1.4.1.33049.3.1.1.1.16
Total number of packets with a length between 1024 and 1518 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

mellanoxIfVPIJumboPkts		1.3.6.1.4.1.33049.3.1.1.1.17
Total number of Jumbo-sized packets (bigger than 1518 bytes).
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

mellanoxIfVPIUndersizedPkts		1.3.6.1.4.1.33049.3.1.1.1.18
Total number of undersized packets (smaller than 64 bytes).
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

mellanoxIfVPIOversizedPkts		1.3.6.1.4.1.33049.3.1.1.1.19
Total number of oversized packets (bigger than 9216 bytes).
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

mellanoxIfVPIUnknownControlOpcode		1.3.6.1.4.1.33049.3.1.1.1.20
Total number of unknown control opcodes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

mellanoxIfVPIFCSErrors		1.3.6.1.4.1.33049.3.1.1.1.21
Total number of Frame Check Sequence errors.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64