MADGECAU-MIB

File: MADGECAU-MIB.mib (44458 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC-1215

Imported symbols

enterprises NetworkAddress IpAddress
Counter Gauge TimeTicks
OBJECT-TYPE TRAP-TYPE

Defined Types

MadgeCauLamEntry  
SEQUENCE    
  madgeCauLamNo INTEGER
  madgeCauLamType INTEGER
  madgeCauLamState INTEGER
  madgeCauLamAdminState INTEGER
  madgeCauLamAllPorts STRING Size(20)
  madgeCauLamSpeedDetect INTEGER

MadgeCauLCDEntry  
SEQUENCE    
  madgeCauLCDNo INTEGER
  madgeCauLCDInfo STRING Size(32)

MadgeCauAddrEntry  
SEQUENCE    
  madgeCauAddrLamNo INTEGER
  madgeCauAddrPortNo INTEGER
  madgeCauAddrInfo STRING Size(48)
  madgeCauAddrAllowedNode STRING Size(6)

MadgeCauSecurityEntry  
SEQUENCE    
  madgeCauSecurityIndex INTEGER
  madgeCauSecurityNodeAddress STRING Size(6)
  madgeCauSecurityExceptionPM INTEGER
  madgeCauSecurityExceptionPMUnsafe INTEGER
  madgeCauSecurityExceptionRogueNode INTEGER
  madgeCauSecurityExceptionIllegalMF INTEGER
  madgeCauSecurityExceptionWrongNode INTEGER

Defined Values

madge 1.3.6.1.4.1.494
OBJECT IDENTIFIER    

madgeCau 1.3.6.1.4.1.494.2
OBJECT IDENTIFIER    

madgeCauTop 1.3.6.1.4.1.494.2.1
OBJECT IDENTIFIER    

madgeCauInfo 1.3.6.1.4.1.494.2.2
OBJECT IDENTIFIER    

madgeCauLam 1.3.6.1.4.1.494.2.3
OBJECT IDENTIFIER    

madgeCauLCD 1.3.6.1.4.1.494.2.5
OBJECT IDENTIFIER    

madgeCauAddr 1.3.6.1.4.1.494.2.6
OBJECT IDENTIFIER    

madgeCauConfig 1.3.6.1.4.1.494.2.7
OBJECT IDENTIFIER    

madgeCauNewConfig 1.3.6.1.4.1.494.2.8
OBJECT IDENTIFIER    

madgeCauSecurity 1.3.6.1.4.1.494.2.9
OBJECT IDENTIFIER    

madgeCauFault 1.3.6.1.4.1.494.2.10
OBJECT IDENTIFIER    

madgeCauKill 1.3.6.1.4.1.494.2.11
OBJECT IDENTIFIER    

madgeCauTrapInfo 1.3.6.1.4.1.494.2.12
OBJECT IDENTIFIER    

madgeCauTopWrap 1.3.6.1.4.1.494.2.1.1
The current wrap state of the cau.
OBJECT-TYPE    
  INTEGER normal(1), wrap-ri(2), wrap-ro(3), wrap-both(4)  

madgeCauTopWrapCtrl 1.3.6.1.4.1.494.2.1.2
The administratively-assigned wrap state of the cau.
OBJECT-TYPE    
  INTEGER normal(1), wrap-ri(2), wrap-ro(3), wrap-both(4)  

madgeCauTopRIType 1.3.6.1.4.1.494.2.1.3
The cable type of the Ring In (RI) port.
OBJECT-TYPE    
  INTEGER fibre(1), copper(2), utp(3)  

madgeCauTopRIState 1.3.6.1.4.1.494.2.1.4
The state of the Token Ring Signal associated with the Ring In (RI) port.
OBJECT-TYPE    
  INTEGER noSignal(1), yesSignal(2)  

madgeCauTopROType 1.3.6.1.4.1.494.2.1.5
The cable type of the Ring Out (RO) port.
OBJECT-TYPE    
  INTEGER fibre(1), copper(2), utp(3)  

madgeCauTopROState 1.3.6.1.4.1.494.2.1.6
The state of the Token Ring Signal associated with the Ring Out (RO) port.
OBJECT-TYPE    
  INTEGER noSignal(1), yesSignal(2)  

madgeCauTopBackupRing 1.3.6.1.4.1.494.2.1.7
The state of the backup ring.
OBJECT-TYPE    
  INTEGER beaconing(1), normal(2), badly-cabled(3)  

madgeCauTopBackupUsed 1.3.6.1.4.1.494.2.1.8
Whether the backup ring is in use or not.
OBJECT-TYPE    
  INTEGER unUsed(1), used(2)  

madgeCauInfoVersion 1.3.6.1.4.1.494.2.2.1
The version information. It has the following format:- chars[0-12] are the file name of the download image char[13] is the major version number char[14] is the minor version number char[15] is the development version number char[16] is the hardware version number
OBJECT-TYPE    
  STRING Size(32)  

madgeCauInfoRemoval 1.3.6.1.4.1.494.2.2.2
The removal threshold, this controls how many times a faulty but persistent node is allowed to attempt to insert into the ring before its port is permanently disabled.
OBJECT-TYPE    
  INTEGER 0..255  

madgeCauInfoSRNet 1.3.6.1.4.1.494.2.2.3
The source-routing ring number of the device.
OBJECT-TYPE    
  INTEGER 0..4095  

madgeCauInfoIPXNet 1.3.6.1.4.1.494.2.2.4
The IPX network number of the device.
OBJECT-TYPE    
  INTEGER  

madgeCauInfoFanSpeed 1.3.6.1.4.1.494.2.2.5
The fan speed of the device in rps (revolutions per second.
OBJECT-TYPE    
  INTEGER  

madgeCauInfoTherm 1.3.6.1.4.1.494.2.2.6
The temperature of the device in degrees Celsius.
OBJECT-TYPE    
  INTEGER  

madgeCauInfoType 1.3.6.1.4.1.494.2.2.7
The product identity of the device.
OBJECT-TYPE    
  INTEGER smartCau(2), smartCauPlus(3), smartRam(5), smartRamPlus(7)  

madgeCauLamTable 1.3.6.1.4.1.494.2.3.1
The table of information on all LAMs.
OBJECT-TYPE    
  SEQUENCE OF  
    MadgeCauLamEntry

madgeCauLamEntry 1.3.6.1.4.1.494.2.3.1.1
Information on one LAM.
OBJECT-TYPE    
  MadgeCauLamEntry  

madgeCauLamNo 1.3.6.1.4.1.494.2.3.1.1.1
The LAM to which this entry's addressing information pertains.
OBJECT-TYPE    
  INTEGER  

madgeCauLamType 1.3.6.1.4.1.494.2.3.1.1.2
The type of LAM.
OBJECT-TYPE    
  INTEGER noLam(1), ibmLam(2), utpLam(3), stpLam(4), node(5), badlyCabled(6), mau(8), userMau(9), raylanLam(10), utpLam2(11)  

madgeCauLamState 1.3.6.1.4.1.494.2.3.1.1.3
The LAM status of the LAM.
OBJECT-TYPE    
  INTEGER noLam(1), nodeInserting(4), inserted(5), wrongSpeed(7), fault(8)  

madgeCauLamAdminState 1.3.6.1.4.1.494.2.3.1.1.4
The administrated status of the LAM.
OBJECT-TYPE    
  INTEGER lamEnabled(1), lamDisabled(2)  

madgeCauLamAllPorts 1.3.6.1.4.1.494.2.3.1.1.5
An array of states for all 20 ports on the LAM.
OBJECT-TYPE    
  STRING Size(20)  

madgeCauLamSpeedDetect 1.3.6.1.4.1.494.2.3.1.1.6
Whether or not automatic speed detection is enabled.
OBJECT-TYPE    
  INTEGER sdDisabled(1), sdEnabled(2)  

madgeCauLCDMax 1.3.6.1.4.1.494.2.5.1
The maximum number of LCD messages.
OBJECT-TYPE    
  INTEGER  

madgeCauLCDCurrent 1.3.6.1.4.1.494.2.5.2
The current LCD message number.
OBJECT-TYPE    
  INTEGER  

madgeCauLCDTable 1.3.6.1.4.1.494.2.5.3
The table of information on all LCDs.
OBJECT-TYPE    
  SEQUENCE OF  
    MadgeCauLCDEntry

madgeCauLCDEntry 1.3.6.1.4.1.494.2.5.3.1
Information on one LCD.
OBJECT-TYPE    
  MadgeCauLCDEntry  

madgeCauLCDNo 1.3.6.1.4.1.494.2.5.3.1.1
The LCD number.
OBJECT-TYPE    
  INTEGER  

madgeCauLCDInfo 1.3.6.1.4.1.494.2.5.3.1.2
The LCD message.
OBJECT-TYPE    
  STRING Size(32)  

madgeCauAddrTable 1.3.6.1.4.1.494.2.6.1
The table of addresses of all Ports.
OBJECT-TYPE    
  SEQUENCE OF  
    MadgeCauAddrEntry

madgeCauAddrEntry 1.3.6.1.4.1.494.2.6.1.1
Address information on one Port.
OBJECT-TYPE    
  MadgeCauAddrEntry  

madgeCauAddrLamNo 1.3.6.1.4.1.494.2.6.1.1.1
The LAM number.
OBJECT-TYPE    
  INTEGER 1..4  

madgeCauAddrPortNo 1.3.6.1.4.1.494.2.6.1.1.2
The port number. Note that port number 21 refers to the LAM itself.
OBJECT-TYPE    
  INTEGER 1..21  

madgeCauAddrInfo 1.3.6.1.4.1.494.2.6.1.1.3
An array of MacAddresses.
OBJECT-TYPE    
  STRING  

madgeCauAddrAllowedNode 1.3.6.1.4.1.494.2.6.1.1.4
Node address of node allowed on this LAM port. If this value is 000000000000 then any nodes are allowed.
OBJECT-TYPE    
  STRING Size(6)  

madgeCauConfigLAA 1.3.6.1.4.1.494.2.7.1
The current MacAddresses of the device. This can be set to a LAA (Locally Administrated Address) with an address range of 4000 XXXX XXXX - 7FEF XXXX XXXX.
OBJECT-TYPE    
  STRING Size(6)  

madgeCauConfigNodePort 1.3.6.1.4.1.494.2.7.2
Setting this value forces the device to perform a node-port matching algorithm.
OBJECT-TYPE    
  INTEGER noActiveNodeMatching(1), doActiveNodeMatching(2)  

madgeCauConfig24HourClock 1.3.6.1.4.1.494.2.7.3
Whether the clock displayed on the device is 24 or 12 hour based.
OBJECT-TYPE    
  INTEGER clock12Hour(1), clock24Hour(2), clockNotSupported(3)  

madgeCauConfigClock 1.3.6.1.4.1.494.2.7.4
The time in seconds since 1st Jan 1980.
OBJECT-TYPE    
  INTEGER  

madgeCauConfigPromiscousRmon 1.3.6.1.4.1.494.2.7.5
The current state of Promiscuous Remote Network Monitoring (RMON) on the device.
OBJECT-TYPE    
  INTEGER promiscuousRmonOff(2), promiscuousRmonOn(3)  

madgeCauNewConfigMauStore 1.3.6.1.4.1.494.2.8.1
MAU devices attached to the ring may be deduced in real time, however, sometimes the CAU will get it wrong. This is an unsolvable problem. To get round this, the MAU topology may be saved in the configuation ROM so that the calculation does not have to be performed each time. This variable determines how the MAU topology will be found.
OBJECT-TYPE    
  INTEGER mauDeduce(1), mauRecall(2)  

madgeCauNewConfigNonPromiscuousRmon 1.3.6.1.4.1.494.2.8.2
The current state of Non-Promiscuous Remote Network Monitoring (RMON) on the device.
OBJECT-TYPE    
  INTEGER nonPromiscuousRmonOff(1), nonPromiscuousRmonOn(2)  

madgeCauNewConfigSAPControl 1.3.6.1.4.1.494.2.8.3
Enables or disables the generation of IPX service advert (SAP) frames.
OBJECT-TYPE    
  INTEGER sapsDisabled(1), sapsEnabled(2)  

madgeCauSecurityPMAnnounce 1.3.6.1.4.1.494.2.9.1
Whether or not to transmit Promiscuous Mode announcement frames when promiscuous RMON is in use.
OBJECT-TYPE    
  INTEGER pmAnnounceOff(1), pmAnnounceOn(2)  

madgeCauSecurityPMSafePollTimer 1.3.6.1.4.1.494.2.9.2
The period, in seconds, between each poll to discover rogue nodes, etc..
OBJECT-TYPE    
  INTEGER 1..65535  

madgeCauSecurityPMSafeReplyTimeout 1.3.6.1.4.1.494.2.9.3
The interval, in seconds, within which a reply must be recieved for a pm-safe? request.
OBJECT-TYPE    
  INTEGER 1..255  

madgeCauSecurityPMSafeRetries 1.3.6.1.4.1.494.2.9.4
The number of attempts which will be made to determine whether a node is pm-safe before giving up.
OBJECT-TYPE    
  INTEGER 1..255  

madgeCauSecurityAllowedManufacturers 1.3.6.1.4.1.494.2.9.5
Defines which manufacturers are legal on the ring.
OBJECT-TYPE    
  INTEGER allManufacturers(1), madgeIBMOnly(2), madgeOnly(3)  

madgeCauSecurityActionPM 1.3.6.1.4.1.494.2.9.6
Defines what happens when the CAU detects a node in Promiscuous Mode that shouldn't be.
OBJECT-TYPE    
  INTEGER ignore(1), inform(2), remove(3)  

madgeCauSecurityActionPMUnsafe 1.3.6.1.4.1.494.2.9.7
Defines what happens when the CAU detects a node that is not PM-safe (unless listed as an exception).
OBJECT-TYPE    
  INTEGER ignore(1), inform(2), remove(3)  

madgeCauSecurityActionRogueNode 1.3.6.1.4.1.494.2.9.8
Defines what happens when the CAU detects a rogue node (unless listed as an exception).
OBJECT-TYPE    
  INTEGER ignore(1), inform(2), remove(3)  

madgeCauSecurityActionIllegalMF 1.3.6.1.4.1.494.2.9.9
Defines what happens when the CAU detects a node whose manufacturer is considered illegal (unless the node is listed as an exception).
OBJECT-TYPE    
  INTEGER ignore(1), inform(2), remove(3)  

madgeCauSecurityTable 1.3.6.1.4.1.494.2.9.10
Table of information on all nodes which are allowed to be on the ring despite some disqualifying factor. Note that this is a sparse table - see description of madgeCauSecurityNodeAddress.
OBJECT-TYPE    
  SEQUENCE OF  
    MadgeCauSecurityEntry

madgeCauSecurityEntry 1.3.6.1.4.1.494.2.9.10.1
Information on one node which is allowed to be on the ring despite some disqualifying factor.
OBJECT-TYPE    
  MadgeCauSecurityEntry  

madgeCauSecurityIndex 1.3.6.1.4.1.494.2.9.10.1.1
The table entry to which this entry's information pertains.
OBJECT-TYPE    
  INTEGER  

madgeCauSecurityNodeAddress 1.3.6.1.4.1.494.2.9.10.1.2
The node address of the node which is allowed on the ring if the right conditions are met. If this entry reads as all zeros then this is an empty table entry. Writing all zeroes to this field will clear the table entry completely (including all exceptions).
OBJECT-TYPE    
  STRING Size(6)  

madgeCauSecurityExceptionPM 1.3.6.1.4.1.494.2.9.10.1.3
Whether or not the CAU allows the node on the ring if it enters Promiscuous Mode.
OBJECT-TYPE    
  INTEGER disallow(1), allow(2)  

madgeCauSecurityExceptionPMUnsafe 1.3.6.1.4.1.494.2.9.10.1.4
Whether or not the CAU allows the node on the ring if it is Promiscuous-Mode-Unsafe.
OBJECT-TYPE    
  INTEGER disallow(1), allow(2)  

madgeCauSecurityExceptionRogueNode 1.3.6.1.4.1.494.2.9.10.1.5
Whether or not the CAU allows the node on the ring if it is considered a rogue node.
OBJECT-TYPE    
  INTEGER disallow(1), allow(2)  

madgeCauSecurityExceptionIllegalMF 1.3.6.1.4.1.494.2.9.10.1.6
Whether or not the CAU allows the node on the ring if it's manufacturer is consdered illegal.
OBJECT-TYPE    
  INTEGER disallow(1), allow(2)  

madgeCauSecurityExceptionWrongNode 1.3.6.1.4.1.494.2.9.10.1.7
Whether or not the CAU allows the node on the ring if it is plugged into the wrong port.
OBJECT-TYPE    
  INTEGER disallow(1), allow(2)  

madgeCauSecurityActionWrongNode 1.3.6.1.4.1.494.2.9.11
Defines what happens when the CAU detects a node trying to open on a port for which it does not have legal access.
OBJECT-TYPE    
  INTEGER ignore(1), inform(2), remove(3)  

madgeCauSecurityExtendedException 1.3.6.1.4.1.494.2.9.12
The new mode extends the exception list from 24 nodes to 160 nodes. However, to do this it must reduce the location and comments fields and not save the port security data. This might not be possible in some cases and an erase configuration is the only cure. This is supported in microcode 4.20 and later.
OBJECT-TYPE    
  INTEGER oldModeOnly(1), inOldMode(2), inNewMode(3)  

madgeCauFaultRPFailAction 1.3.6.1.4.1.494.2.10.1
Defines what happens when the CAU detects a ring poll failure.
OBJECT-TYPE    
  INTEGER ignore(1), inform(2), remove(3)  

madgeCauFaultBeaconDefault 1.3.6.1.4.1.494.2.10.2
DEFAULT number of successive beacon frames from one node before a problem is noticed.
OBJECT-TYPE    
  INTEGER 1..255  

madgeCauFaultBeaconThreshold 1.3.6.1.4.1.494.2.10.3
Number of successive beacon frames from one node before a problem is noticed.
OBJECT-TYPE    
  INTEGER 1..255  

madgeCauFaultBeaconAction 1.3.6.1.4.1.494.2.10.4
Defines what happens when the CAU detects a succession of beacon frames from the same node.
OBJECT-TYPE    
  INTEGER ignore(1), inform(2), remove(3)  

madgeCauFaultRingPurgeDefault 1.3.6.1.4.1.494.2.10.5
DEFAULT number of successive ring purge frames from one node before a problem is noticed.
OBJECT-TYPE    
  INTEGER 0..255  

madgeCauFaultRingPurgeThreshold 1.3.6.1.4.1.494.2.10.6
Number of successive ring purge frames from one node before a problem is noticed.
OBJECT-TYPE    
  INTEGER 0..255  

madgeCauFaultRingPurgeAction 1.3.6.1.4.1.494.2.10.7
Defines what happens when the CAU detects a succession of ring purge frames from the same node.
OBJECT-TYPE    
  INTEGER ignore(1), inform(2), remove(3)  

madgeCauFaultIsoErrDefault 1.3.6.1.4.1.494.2.10.8
DEFAULT number of isolating errors (scaled by a factor of 6) before a problem is noticed.
OBJECT-TYPE    
  INTEGER 0..255  

madgeCauFaultIsoErrThreshold 1.3.6.1.4.1.494.2.10.9
Number of isolating errors (scaled by a factor of 6) before a problem is noticed.
OBJECT-TYPE    
  INTEGER 0..255  

madgeCauFaultIsoErrAction 1.3.6.1.4.1.494.2.10.10
Defines what happens when the CAU detects too many isolating errors.
OBJECT-TYPE    
  INTEGER ignore(1), inform(2), remove(3)  

madgeCauKillNodeAddress 1.3.6.1.4.1.494.2.11.1
The node address to which the rest of the information in this group pertains.
OBJECT-TYPE    
  STRING Size(6)  

madgeCauKillReason 1.3.6.1.4.1.494.2.11.2
The reason the node was noticed.
OBJECT-TYPE    
  INTEGER reasonUnknown(1), pmViolation(2), pmUnsafe(3), rogueNode(4), illegalManufacturer(5), ringPollFailure(6), beaconing(7), ringPurges(8), isolatingErrors(9), wrongNode(10)  

madgeCauKillStatus 1.3.6.1.4.1.494.2.11.3
What exactly has happened to the node.
OBJECT-TYPE    
  INTEGER information(1), aboutToKill(2), killFailed(3), killed(4), killAbandoned(5), resurrected(6)  

madgeCauKillLamNo 1.3.6.1.4.1.494.2.11.4
LAM into which offending node is plugged.
OBJECT-TYPE    
  INTEGER 1..4  

madgeCauKillPortNo 1.3.6.1.4.1.494.2.11.5
LAM port into which offending node is plugged.
OBJECT-TYPE    
  INTEGER 1..20  

madgeCauTrapInfoLamNo 1.3.6.1.4.1.494.2.12.1
Relevant LAM number.
OBJECT-TYPE    
  INTEGER 1..4  

madgeCauTrapInfoPortNo 1.3.6.1.4.1.494.2.12.2
Relevant Port number. A port number of 21 refers to the LAM itself
OBJECT-TYPE    
  INTEGER 1..21  

madgeCauTrapInfoState 1.3.6.1.4.1.494.2.12.3
The status of the node.
OBJECT-TYPE    
  INTEGER noNode(1), inserted(2), wrongSpeed(3), fault(4)