Juniper-PROFILE-MIB

File: Juniper-PROFILE-MIB.mib (22632 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
IF-MIB Juniper-MIBs

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Unsigned32
TEXTUAL-CONVENTION DisplayString RowStatus
MODULE-COMPLIANCE OBJECT-GROUP InterfaceIndex
juniMibs

Defined Types

JuniProfileIfEncaps  
TEXTUAL-CONVENTION    
  current INTEGER ip(0), ppp(1), atm1483(11), pppoe(17), bridgedEthernet(19), any(127)

JuniProfileRangeId  
TEXTUAL-CONVENTION    
  current Unsigned32

JuniProfileNameEntry  
SEQUENCE    
  juniProfileNameName DisplayString
  juniProfileNameRowStatus RowStatus
  juniProfileNameId Unsigned32

JuniProfileIdEntry  
SEQUENCE    
  juniProfileIdId Unsigned32
  juniProfileIdName DisplayString

JuniProfAssignIfEntry  
SEQUENCE    
  juniProfAssignIfIndex InterfaceIndex
  juniProfAssignIfEncaps JuniProfileIfEncaps
  juniProfAssignIfRowStatus RowStatus
  juniProfAssignIfProfileId Unsigned32

JuniProfToIfMapEntry  
SEQUENCE    
  juniProfToIfMapProfileId Unsigned32
  juniProfToIfMapIndex InterfaceIndex
  juniProfToIfMapEncaps JuniProfileIfEncaps

JuniProfAssignIfRangeEntry  
SEQUENCE    
  juniProfAssignIfRangeIndex InterfaceIndex
  juniProfAssignIfRangeEncaps JuniProfileIfEncaps
  juniProfAssignIfRangeRangeId JuniProfileRangeId
  juniProfAssignIfRangeRowStatus RowStatus
  juniProfAssignIfRangeProfileId Unsigned32

JuniProfToIfRangeMapEntry  
SEQUENCE    
  juniProfToIfRangeMapProfileId Unsigned32
  juniProfToIfRangeMapIndex InterfaceIndex
  juniProfToIfRangeMapEncaps JuniProfileIfEncaps
  juniProfToIfRangeMapRangeId JuniProfileRangeId

Defined Values

juniProfileMIB 1.3.6.1.4.1.4874.2.2.25
The Profile MIB for the Juniper Networks enterprise.
MODULE-IDENTITY    

juniProfileObjects 1.3.6.1.4.1.4874.2.2.25.1
OBJECT IDENTIFIER    

juniProfileName 1.3.6.1.4.1.4874.2.2.25.1.1
OBJECT IDENTIFIER    

juniProfileAssign 1.3.6.1.4.1.4874.2.2.25.1.2
OBJECT IDENTIFIER    

juniProfileNameTable 1.3.6.1.4.1.4874.2.2.25.1.1.1
The entries in this table provide mappings of configuration profile names to local integer identifiers for those profiles. These integers are used as indexes into other MIB tables containing profile configuration parameters associated with the same profile name.
OBJECT-TYPE    
  SEQUENCE OF  
    JuniProfileNameEntry

juniProfileNameEntry 1.3.6.1.4.1.4874.2.2.25.1.1.1.1
A mapping of a profile name to an integer identifier for that name.
OBJECT-TYPE    
  JuniProfileNameEntry  

juniProfileNameName 1.3.6.1.4.1.4874.2.2.25.1.1.1.1.1
The profile name uniquely identifying this entry.
OBJECT-TYPE    
  DisplayString Size(1..80)  

juniProfileNameRowStatus 1.3.6.1.4.1.4874.2.2.25.1.1.1.1.2
Controls creation/deletion of entries in this table. Only the values 'createAndGo' and 'destroy' may be SET.
OBJECT-TYPE    
  RowStatus  

juniProfileNameId 1.3.6.1.4.1.4874.2.2.25.1.1.1.1.3
The integer identifier associated with this profile name. This value of this identifier is assigned by the device when an entry in this table is created.
OBJECT-TYPE    
  Unsigned32  

juniProfileIdTable 1.3.6.1.4.1.4874.2.2.25.1.1.2
Provides inverse mapping of profile IDs to profile names.
OBJECT-TYPE    
  SEQUENCE OF  
    JuniProfileIdEntry

juniProfileIdEntry 1.3.6.1.4.1.4874.2.2.25.1.1.2.1
A mapping of an integer identifier to a profile name.
OBJECT-TYPE    
  JuniProfileIdEntry  

juniProfileIdId 1.3.6.1.4.1.4874.2.2.25.1.1.2.1.1
The integer identifier associated with this profile name.
OBJECT-TYPE    
  Unsigned32  

juniProfileIdName 1.3.6.1.4.1.4874.2.2.25.1.1.2.1.2
The profile name having the associated identifier.
OBJECT-TYPE    
  DisplayString Size(1..80)  

juniProfAssignIf 1.3.6.1.4.1.4874.2.2.25.1.2.1
OBJECT IDENTIFIER    

juniProfAssignIfRange 1.3.6.1.4.1.4874.2.2.25.1.2.2
OBJECT IDENTIFIER    

juniProfAssignIfTable 1.3.6.1.4.1.4874.2.2.25.1.2.1.1
Table providing profile assignment to interface/encapsulation pair. The entries in this table specify which profile to use when creating and configuring a dynamic interface (whose type is identified by the encapsulation) above a specified interface. Each entry in this table is reflected in a juniProfAssignIfTable entry having a zero-valued range identifier.
OBJECT-TYPE    
  SEQUENCE OF  
    JuniProfAssignIfEntry

juniProfAssignIfEntry 1.3.6.1.4.1.4874.2.2.25.1.2.1.1.1
An assignment of a profile to an interface/encapsulation pair.
OBJECT-TYPE    
  JuniProfAssignIfEntry  

juniProfAssignIfIndex 1.3.6.1.4.1.4874.2.2.25.1.2.1.1.1.1
The ifIndex of the interface to which the profile is assigned.
OBJECT-TYPE    
  InterfaceIndex  

juniProfAssignIfEncaps 1.3.6.1.4.1.4874.2.2.25.1.2.1.1.1.2
The encapsulated protocol type to which the assigned profile pertains. An interface may have a different profile assigned for each encapsulation it supports. If an entry for a specific encapsulation is absent, the profile assigned for the 'any' encapsulation will be used (if that assignment is present in this table).
OBJECT-TYPE    
  JuniProfileIfEncaps  

juniProfAssignIfRowStatus 1.3.6.1.4.1.4874.2.2.25.1.2.1.1.1.3
For SET, supports only createAndGo(4) and destroy(6). Returns active(1) when read.
OBJECT-TYPE    
  RowStatus  

juniProfAssignIfProfileId 1.3.6.1.4.1.4874.2.2.25.1.2.1.1.1.4
The ID of the profile assigned to this interface/encapsulation pair.
OBJECT-TYPE    
  Unsigned32  

juniProfToIfMapTable 1.3.6.1.4.1.4874.2.2.25.1.2.1.2
Table to report the set of interface/encapsulation pairs assigned to each profile.
OBJECT-TYPE    
  SEQUENCE OF  
    JuniProfToIfMapEntry

juniProfToIfMapEntry 1.3.6.1.4.1.4874.2.2.25.1.2.1.2.1
Reports an interface/encapsulation pair assigned to a profile.
OBJECT-TYPE    
  JuniProfToIfMapEntry  

juniProfToIfMapProfileId 1.3.6.1.4.1.4874.2.2.25.1.2.1.2.1.1
The ID of the profile assigned to this interface/encapsulation pair.
OBJECT-TYPE    
  Unsigned32  

juniProfToIfMapIndex 1.3.6.1.4.1.4874.2.2.25.1.2.1.2.1.2
The ifIndex of the interface to which the profile is assigned.
OBJECT-TYPE    
  InterfaceIndex  

juniProfToIfMapEncaps 1.3.6.1.4.1.4874.2.2.25.1.2.1.2.1.3
The encapsulation type to which the assigned profile pertains. An interface may have a different profile assigned for each encapsulation type it supports.
OBJECT-TYPE    
  JuniProfileIfEncaps  

juniProfAssignIfRangeTable 1.3.6.1.4.1.4874.2.2.25.1.2.2.1
Table providing profile assignment to interface/encapsulation/range 3-tuple. The entries in this table specify which profile to use when creating and configuring a dynamic interface (whose type is identified by the encapsulation) above a specified interface, with profile selection being further discriminated by the range identifier. Each entry in juniProfAssignIfTable is reflected by an entry in this table having a zero-valued range identifier.
OBJECT-TYPE    
  SEQUENCE OF  
    JuniProfAssignIfRangeEntry

juniProfAssignIfRangeEntry 1.3.6.1.4.1.4874.2.2.25.1.2.2.1.1
An assignment of a profile to an interface/encapsulation/range 3-tuple.
OBJECT-TYPE    
  JuniProfAssignIfRangeEntry  

juniProfAssignIfRangeIndex 1.3.6.1.4.1.4874.2.2.25.1.2.2.1.1.1
The ifIndex of the interface to which the profile is assigned.
OBJECT-TYPE    
  InterfaceIndex  

juniProfAssignIfRangeEncaps 1.3.6.1.4.1.4874.2.2.25.1.2.2.1.1.2
The encapsulated protocol type to which the assigned profile pertains. An interface may have zero, one or more profiles assigned for each encapsulation it supports. If an entry for a specific encapsulation is absent, the profile assigned for the 'any' encapsulation will be used (if that assignment is present in this table).
OBJECT-TYPE    
  JuniProfileIfEncaps  

juniProfAssignIfRangeRangeId 1.3.6.1.4.1.4874.2.2.25.1.2.2.1.1.3
An application-specific range identifier to which the assigned profile pertains. An interface may have zero, one or more profiles assigned for each encapsulation it supports, distinguished by range identifier. A value of zero should be used for an interface that does not support multiple profile assignments per encapsulation.
OBJECT-TYPE    
  JuniProfileRangeId  

juniProfAssignIfRangeRowStatus 1.3.6.1.4.1.4874.2.2.25.1.2.2.1.1.4
For SET, supports only createAndGo(4) and destroy(6). Returns active(1) when read.
OBJECT-TYPE    
  RowStatus  

juniProfAssignIfRangeProfileId 1.3.6.1.4.1.4874.2.2.25.1.2.2.1.1.5
The ID of the profile assigned to this interface/encapsulation/range 3-tuple.
OBJECT-TYPE    
  Unsigned32  

juniProfToIfRangeMapTable 1.3.6.1.4.1.4874.2.2.25.1.2.2.2
Table to report the set of interface/encapsulation/range 3-tuples assigned to each profile.
OBJECT-TYPE    
  SEQUENCE OF  
    JuniProfToIfRangeMapEntry

juniProfToIfRangeMapEntry 1.3.6.1.4.1.4874.2.2.25.1.2.2.2.1
Reports an interface/encapsulation/range 3-tuple assigned to a profile.
OBJECT-TYPE    
  JuniProfToIfRangeMapEntry  

juniProfToIfRangeMapProfileId 1.3.6.1.4.1.4874.2.2.25.1.2.2.2.1.1
The ID of the profile assigned to this interface/encapsulation pair.
OBJECT-TYPE    
  Unsigned32  

juniProfToIfRangeMapIndex 1.3.6.1.4.1.4874.2.2.25.1.2.2.2.1.2
The ifIndex of the interface to which the profile is assigned.
OBJECT-TYPE    
  InterfaceIndex  

juniProfToIfRangeMapEncaps 1.3.6.1.4.1.4874.2.2.25.1.2.2.2.1.3
The encapsulation type to which the assigned profile pertains. An interface may have zero, one or more profiles assigned for each encapsulation type it supports.
OBJECT-TYPE    
  JuniProfileIfEncaps  

juniProfToIfRangeMapRangeId 1.3.6.1.4.1.4874.2.2.25.1.2.2.2.1.4
An application-specific range identifier to which the assigned profile pertains. An interface may have zero, one or more profiles assigned for each encapsulation it supports, distinguished by range identifier.
OBJECT-TYPE    
  JuniProfileRangeId  

juniProfileMIBConformance 1.3.6.1.4.1.4874.2.2.25.4
OBJECT IDENTIFIER    

juniProfileMIBCompliances 1.3.6.1.4.1.4874.2.2.25.4.1
OBJECT IDENTIFIER    

juniProfileMIBGroups 1.3.6.1.4.1.4874.2.2.25.4.2
OBJECT IDENTIFIER    

juniProfileCompliance 1.3.6.1.4.1.4874.2.2.25.4.1.1
Obsolete compliance statement for systems supporting naming of configuration profiles. This statement became obsolete when the interface profile assignment group was added.
MODULE-COMPLIANCE    

juniProfileCompliance2 1.3.6.1.4.1.4874.2.2.25.4.1.2
Obsolete compliance statement for systems supporting naming of configuration profiles and profile assignment to interfaces. This statement became obsolete when support for range indexing of profile assignments was added.
MODULE-COMPLIANCE    

juniProfileCompliance3 1.3.6.1.4.1.4874.2.2.25.4.1.3
The compliance statement for systems supporting naming of configuration profiles and profile assignment to interfaces.
MODULE-COMPLIANCE    

juniProfileGroup 1.3.6.1.4.1.4874.2.2.25.4.2.1
The basic collection of objects providing management of Profile naming functionality in a Juniper product.
OBJECT-GROUP    

juniProfileIfGroup 1.3.6.1.4.1.4874.2.2.25.4.2.2
Obsolete collection of objects providing management of Profile assignment to interfaces in a Juniper product. This group became obsolete when support for range indexing of profile assignments was added.
OBJECT-GROUP    

juniProfileIfGroup2 1.3.6.1.4.1.4874.2.2.25.4.2.3
The basic collection of objects providing management of Profile assignment to interfaces in a Juniper product.
OBJECT-GROUP