IPOMANII-MIB

File: IPOMANII-MIB.mib (137694 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
RFC-1215

Imported symbols

enterprises IpAddress OBJECT-TYPE
DisplayString TRAP-TYPE

Defined Types

IpmAgentTrapsReceiversEntry  
SEQUENCE    
  trapsIndex INTEGER
  trapsReceiverAddr IpAddress
  receiverCommunityString DisplayString
  receiverNmsType INTEGER
  receiverSeverityLevel INTEGER
  receiverDescription DisplayString

IpmAgentAccessControlEntry  
SEQUENCE    
  accessIndex INTEGER
  accessControlAddr IpAddress
  accessControlMode INTEGER

IpmDeviceInletConfigEntry  
SEQUENCE    
  inletConfigIndex INTEGER
  inletConfigDesc DisplayString
  inletConfigVoltageHigh INTEGER
  inletConfigVoltageHighAction INTEGER
  inletConfigVoltageLow INTEGER
  inletConfigVoltageLowAction INTEGER
  inletConfigCurrentHigh INTEGER
  inletConfigCurrentHighAction INTEGER
  inletConfigFrequencyHigh INTEGER
  inletConfigfrequencyHighAction INTEGER
  inletConfigFrequencyLow INTEGER
  inletConfigfrequencyLowAction INTEGER

IpmDeviceInletStatusEntry  
SEQUENCE    
  inletStatusIndex INTEGER
  inletStatusVoltage INTEGER
  inletStatusCurrent INTEGER
  inletStatusFrequency INTEGER
  inletStatusKwatt INTEGER
  inletStatusWH INTEGER

IpmDeviceOutletConfigEntry  
SEQUENCE    
  outletConfigIndex INTEGER
  outletConfigDesc DisplayString
  outletConfigLocation DisplayString
  outletConfigOnDelay INTEGER
  outletConfigOffDelay INTEGER
  outletConfigCurrentHigh INTEGER
  outletConfigCurrentHighAction INTEGER

IpmDeviceOutletStatusEntry  
SEQUENCE    
  outletStatusIndex INTEGER
  outletStatusStatus INTEGER
  outletStatusCurrent INTEGER
  outletStatusKwatt INTEGER
  outletStatusWH INTEGER
  outletStatusStateTime INTEGER
  outletStatusTimeToGo INTEGER

IpmDeviceOutletControlEntry  
SEQUENCE    
  outletControlIndex INTEGER
  outletControlControl INTEGER

IpmDeviceCcOutConfigEntry  
SEQUENCE    
  ccOutConfigIndex INTEGER
  ccOutConfigDesc DisplayString
  ccOutConfigEventAction INTEGER
  ccOutConfigCloseDelay INTEGER
  ccOutConfigOpenDelay INTEGER

IpmDeviceCcOutStatusEntry  
SEQUENCE    
  ccOutStatusIndex INTEGER
  ccOutStatusStatus INTEGER
  ccOutStatusTimeOnState INTEGER

IpmDeviceCcOutControlEntry  
SEQUENCE    
  ccOutControlIndex INTEGER
  ccOutControlControl INTEGER

IpmSlaveStateEntry  
SEQUENCE    
  slaveStateIndex INTEGER
  slaveStateControl01 INTEGER

IpmDeviceSlaveInletStatusEntry  
SEQUENCE    
  inletSlaveStatusIndex INTEGER
  inletSlaveStatusVoltage INTEGER
  inletSlaveStatusCurrent INTEGER
  inletSlaveStatusFrequency INTEGER
  inletSlaveStatusKwatt INTEGER
  inletSlaveStatusWH INTEGER
  inletSlaveStatusVoltage2 INTEGER
  inletSlaveStatusCurrent2 INTEGER
  inletSlaveStatusFrequency2 INTEGER
  inletSlaveStatusKwatt2 INTEGER
  inletSlaveStatusWH2 INTEGER

IpmDeviceslaveInletConfigEntry  
SEQUENCE    
  slaveInletConfigIndex INTEGER
  slaveInletConfigVoltageHigh INTEGER
  slaveInletConfigVoltageLow INTEGER
  slaveInlet2ConfigVoltageHigh INTEGER
  slaveInlet2ConfigVoltageLow INTEGER

IpmSlaveDeviceOutletNameEntry  
SEQUENCE    
  slaveOutletNameIndex INTEGER
  slaveOutletName01 DisplayString
  slaveOutletName02 DisplayString
  slaveOutletName03 DisplayString
  slaveOutletName04 DisplayString
  slaveOutletName05 DisplayString
  slaveOutletName06 DisplayString
  slaveOutletName07 DisplayString
  slaveOutletName08 DisplayString
  slaveOutletName09 DisplayString
  slaveOutletName10 DisplayString
  slaveOutletName11 DisplayString
  slaveOutletName12 DisplayString

IpmSlaveDeviceOutletLocationEntry  
SEQUENCE    
  slaveOutletLocationIndex INTEGER
  slaveOutletLocation01 DisplayString
  slaveOutletLocation02 DisplayString
  slaveOutletLocation03 DisplayString
  slaveOutletLocation04 DisplayString
  slaveOutletLocation05 DisplayString
  slaveOutletLocation06 DisplayString
  slaveOutletLocation07 DisplayString
  slaveOutletLocation08 DisplayString
  slaveOutletLocation09 DisplayString
  slaveOutletLocation10 DisplayString
  slaveOutletLocation11 DisplayString
  slaveOutletLocation12 DisplayString

IpmSlaveDeviceOutletOnTimeEntry  
SEQUENCE    
  slaveOutletOnTimeIndex INTEGER
  slaveOutletOnTime01 INTEGER
  slaveOutletOnTime02 INTEGER
  slaveOutletOnTime03 INTEGER
  slaveOutletOnTime04 INTEGER
  slaveOutletOnTime05 INTEGER
  slaveOutletOnTime06 INTEGER
  slaveOutletOnTime07 INTEGER
  slaveOutletOnTime08 INTEGER
  slaveOutletOnTime09 INTEGER
  slaveOutletOnTime10 INTEGER
  slaveOutletOnTime11 INTEGER
  slaveOutletOnTime12 INTEGER

IpmSlaveDeviceOutletOffTimeEntry  
SEQUENCE    
  slaveOutletOffTimeIndex INTEGER
  slaveOutletOffTime01 INTEGER
  slaveOutletOffTime02 INTEGER
  slaveOutletOffTime03 INTEGER
  slaveOutletOffTime04 INTEGER
  slaveOutletOffTime05 INTEGER
  slaveOutletOffTime06 INTEGER
  slaveOutletOffTime07 INTEGER
  slaveOutletOffTime08 INTEGER
  slaveOutletOffTime09 INTEGER
  slaveOutletOffTime10 INTEGER
  slaveOutletOffTime11 INTEGER
  slaveOutletOffTime12 INTEGER

IpmSlaveDeviceOutletCurrThEntry  
SEQUENCE    
  slaveOutletCurrThIndex INTEGER
  slaveOutletCurrTh01 INTEGER
  slaveOutletCurrTh02 INTEGER
  slaveOutletCurrTh03 INTEGER
  slaveOutletCurrTh04 INTEGER
  slaveOutletCurrTh05 INTEGER
  slaveOutletCurrTh06 INTEGER
  slaveOutletCurrTh07 INTEGER
  slaveOutletCurrTh08 INTEGER
  slaveOutletCurrTh09 INTEGER
  slaveOutletCurrTh10 INTEGER
  slaveOutletCurrTh11 INTEGER
  slaveOutletCurrTh12 INTEGER

IpmSlaveDeviceOutletCurrentEntry  
SEQUENCE    
  slaveOutletCurrentIndex INTEGER
  slaveOutletCurrent01 INTEGER
  slaveOutletCurrent02 INTEGER
  slaveOutletCurrent03 INTEGER
  slaveOutletCurrent04 INTEGER
  slaveOutletCurrent05 INTEGER
  slaveOutletCurrent06 INTEGER
  slaveOutletCurrent07 INTEGER
  slaveOutletCurrent08 INTEGER
  slaveOutletCurrent09 INTEGER
  slaveOutletCurrent10 INTEGER
  slaveOutletCurrent11 INTEGER
  slaveOutletCurrent12 INTEGER

IpmSlaveDeviceOutletWattEntry  
SEQUENCE    
  slaveOutletWattIndex INTEGER
  slaveOutletWatt01 INTEGER
  slaveOutletWatt02 INTEGER
  slaveOutletWatt03 INTEGER
  slaveOutletWatt04 INTEGER
  slaveOutletWatt05 INTEGER
  slaveOutletWatt06 INTEGER
  slaveOutletWatt07 INTEGER
  slaveOutletWatt08 INTEGER
  slaveOutletWatt09 INTEGER
  slaveOutletWatt10 INTEGER
  slaveOutletWatt11 INTEGER
  slaveOutletWatt12 INTEGER

IpmSlaveDeviceOutletKwattEntry  
SEQUENCE    
  slaveOutletKwattIndex INTEGER
  slaveOutletKwatt01 INTEGER
  slaveOutletKwatt02 INTEGER
  slaveOutletKwatt03 INTEGER
  slaveOutletKwatt04 INTEGER
  slaveOutletKwatt05 INTEGER
  slaveOutletKwatt06 INTEGER
  slaveOutletKwatt07 INTEGER
  slaveOutletKwatt08 INTEGER
  slaveOutletKwatt09 INTEGER
  slaveOutletKwatt10 INTEGER
  slaveOutletKwatt11 INTEGER
  slaveOutletKwatt12 INTEGER

IpmSlaveDeviceOutletActionEntry  
SEQUENCE    
  slaveOutletActionIndex INTEGER
  slaveOutletAction01 INTEGER
  slaveOutletAction02 INTEGER
  slaveOutletAction03 INTEGER
  slaveOutletAction04 INTEGER
  slaveOutletAction05 INTEGER
  slaveOutletAction06 INTEGER
  slaveOutletAction07 INTEGER
  slaveOutletAction08 INTEGER
  slaveOutletAction09 INTEGER
  slaveOutletAction10 INTEGER
  slaveOutletAction11 INTEGER
  slaveOutletAction12 INTEGER

Defined Values

ingrasys 1.3.6.1.4.1.2468
OBJECT IDENTIFIER    

product 1.3.6.1.4.1.2468.1
OBJECT IDENTIFIER    

pduAgent 1.3.6.1.4.1.2468.1.4
OBJECT IDENTIFIER    

iPoManII 1.3.6.1.4.1.2468.1.4.2
OBJECT IDENTIFIER    

ipmObjects 1.3.6.1.4.1.2468.1.4.2.1
OBJECT IDENTIFIER    

ipmTraps 1.3.6.1.4.1.2468.1.4.2.2
OBJECT IDENTIFIER    

ipmIdent 1.3.6.1.4.1.2468.1.4.2.1.1
OBJECT IDENTIFIER    

ipmAgent 1.3.6.1.4.1.2468.1.4.2.1.2
OBJECT IDENTIFIER    

ipmDevice 1.3.6.1.4.1.2468.1.4.2.1.3
OBJECT IDENTIFIER    

ipmSlave 1.3.6.1.4.1.2468.1.4.2.1.4
OBJECT IDENTIFIER    

ipmEnv 1.3.6.1.4.1.2468.1.4.2.1.5
OBJECT IDENTIFIER    

ipmIdentManufacturer 1.3.6.1.4.1.2468.1.4.2.1.1.1
The name of manufacturer.
OBJECT-TYPE    
  DisplayString Size(0..31)  

ipmIdentModel 1.3.6.1.4.1.2468.1.4.2.1.1.2
The Model designation of device.
OBJECT-TYPE    
  DisplayString Size(0..31)  

ipmIdentAgentSoftwareVersion 1.3.6.1.4.1.2468.1.4.2.1.1.3
The firmware version of the device.
OBJECT-TYPE    
  DisplayString Size(0..63)  

ipmIdentName 1.3.6.1.4.1.2468.1.4.2.1.1.4
A description of this device.
OBJECT-TYPE    
  DisplayString Size(0..31)  

ipmAgentConfig 1.3.6.1.4.1.2468.1.4.2.1.2.1
OBJECT IDENTIFIER    

ipmAgentMibVersion 1.3.6.1.4.1.2468.1.4.2.1.2.1.1
The Mib Version implemented on this device.
OBJECT-TYPE    
  INTEGER 1..65500  

ipmAgentTime 1.3.6.1.4.1.2468.1.4.2.1.2.2
OBJECT IDENTIFIER    

ipmAgentTimeDate 1.3.6.1.4.1.2468.1.4.2.1.2.2.1
The date in agent, format is (dd/mm/yyyy)
OBJECT-TYPE    
  DisplayString Size(10..10)  

ipmAgentTimeTime 1.3.6.1.4.1.2468.1.4.2.1.2.2.2
The time in agent, format is (hh:mm:ss)
OBJECT-TYPE    
  DisplayString Size(8..8)  

ipmAgentTimerFromNtp 1.3.6.1.4.1.2468.1.4.2.1.2.2.3
Enable or disable the agent to synchronize date/time with NTP server.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipmAgentNtpIpAddress 1.3.6.1.4.1.2468.1.4.2.1.2.2.4
The ip address of NTP server.
OBJECT-TYPE    
  IpAddress  

ipmAgentNtpTimeZone 1.3.6.1.4.1.2468.1.4.2.1.2.2.5
Time Zone to use when synchronize with NTP server.
OBJECT-TYPE    
  INTEGER gMT-1200(1), gMT-1100(2), gMT-1000(3), gMT-0900(4), gMT-0800(5), gMT-0700(6), gMT-0600(7), gMT-0500(8), gMT-0400(9), gMT-0330(10), gMT-0300(11), gMT-0200(12), gMT-0100(13), gMT-0000(14), gMT0100(15), gMT0200(16), gMT0300(17), gMT0330(18), gMT0400(19), gMT0500(20), gMT0530(21), gMT0600(22), gMT0700(23), gMT0800(24), gMT0900(25), gMT1000(26), gMT1100(27), gMT1200(28)  

ipmAgentDayLightSaving 1.3.6.1.4.1.2468.1.4.2.1.2.2.6
Enable/disable the Day Light Saving when synchronize with NTP server.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipmAgentNetwork 1.3.6.1.4.1.2468.1.4.2.1.2.3
OBJECT IDENTIFIER    

ipmAgentNetworkIp 1.3.6.1.4.1.2468.1.4.2.1.2.3.1
OBJECT IDENTIFIER    

ipmAgentNetworkIpAdress 1.3.6.1.4.1.2468.1.4.2.1.2.3.1.1
The ip address that NMS can identify the managed device.
OBJECT-TYPE    
  IpAddress  

ipmAgentNetworkIpGateway 1.3.6.1.4.1.2468.1.4.2.1.2.3.1.2
The default gateway that allow device managed through routers.
OBJECT-TYPE    
  IpAddress  

ipmAgentNetworkIpSubnet 1.3.6.1.4.1.2468.1.4.2.1.2.3.1.3
Internet address subnet mask
OBJECT-TYPE    
  IpAddress  

ipmAgentNetworkDhcpControl 1.3.6.1.4.1.2468.1.4.2.1.2.3.2
Enable/disable DHCP protocol
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipmAgentNetworkPingControl 1.3.6.1.4.1.2468.1.4.2.1.2.3.3
Enable/disable to response to PING request.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipmAgentNetworkTftpControl 1.3.6.1.4.1.2468.1.4.2.1.2.3.4
Enable/disable TFTP protocol
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipmAgentNetworkTelnet 1.3.6.1.4.1.2468.1.4.2.1.2.3.5
OBJECT IDENTIFIER    

ipmAgentTelnetControl 1.3.6.1.4.1.2468.1.4.2.1.2.3.5.1
Enable/disable Telnet protocol.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipmAgentTelnetPort 1.3.6.1.4.1.2468.1.4.2.1.2.3.5.2
The TCP port for telnet
OBJECT-TYPE    
  INTEGER  

ipmAgentNetworkHttp 1.3.6.1.4.1.2468.1.4.2.1.2.3.6
OBJECT IDENTIFIER    

ipmAgentHttpControl 1.3.6.1.4.1.2468.1.4.2.1.2.3.6.1
Enable/disable HTTP protocol.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipmAgentHttpPort 1.3.6.1.4.1.2468.1.4.2.1.2.3.6.2
The TCP port for HTTP.
OBJECT-TYPE    
  INTEGER  

ipmAgentNetworkSnmp 1.3.6.1.4.1.2468.1.4.2.1.2.3.7
OBJECT IDENTIFIER    

ipmAgentSnmpControl 1.3.6.1.4.1.2468.1.4.2.1.2.3.7.1
Enable/disable SNMP protocol.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipmAgentSnmpPort 1.3.6.1.4.1.2468.1.4.2.1.2.3.7.2
The UDP port for SNMP.
OBJECT-TYPE    
  INTEGER  

ipmAgentLog 1.3.6.1.4.1.2468.1.4.2.1.2.1.4
OBJECT IDENTIFIER    

pduAgentDataLogInterval 1.3.6.1.4.1.2468.1.4.2.1.2.1.4.1
The interval of the updation of the data log. The value is in seconds
OBJECT-TYPE    
  INTEGER 60..28800  

ipmAgentControl 1.3.6.1.4.1.2468.1.4.2.1.2.1.5
OBJECT IDENTIFIER    

ipmAgentControlDefault 1.3.6.1.4.1.2468.1.4.2.1.2.1.5.1
Reset all parameters of the agent to default value.
OBJECT-TYPE    
  INTEGER reset(1), nothing(2)  

ipmAgentControlRestart 1.3.6.1.4.1.2468.1.4.2.1.2.1.5.2
Restart the agent.
OBJECT-TYPE    
  INTEGER restart(1), nothing(2)  

ipmAgentTrap 1.3.6.1.4.1.2468.1.4.2.1.2.1.6
OBJECT IDENTIFIER    

ipmAgentTrapRetryCount 1.3.6.1.4.1.2468.1.4.2.1.2.1.6.1
The count of repeat traps send to NMS before trap acknowledgement received.
OBJECT-TYPE    
  INTEGER  

ipmAgentTrapRetryTime 1.3.6.1.4.1.2468.1.4.2.1.2.1.6.2
The time interval in seconds between retry traps sned to NMS.
OBJECT-TYPE    
  INTEGER  

ipmAgentTrapAckSignature 1.3.6.1.4.1.2468.1.4.2.1.2.1.6.3
The signature of trap acknowledgement.
OBJECT-TYPE    
  INTEGER  

ipmAgentTrapsReceiversTable 1.3.6.1.4.1.2468.1.4.2.1.2.1.7
A list of managers to send traps to. The number of entries is given by the value of agentConfigNumTrapReceivers
OBJECT-TYPE    
  SEQUENCE OF  
    IpmAgentTrapsReceiversEntry

ipmAgentTrapsReceiversEntry 1.3.6.1.4.1.2468.1.4.2.1.2.1.7.1
The managers to send traps to.
OBJECT-TYPE    
  IpmAgentTrapsReceiversEntry  

trapsIndex 1.3.6.1.4.1.2468.1.4.2.1.2.1.7.1.1
The index to a trap receiver entry.
OBJECT-TYPE    
  INTEGER 0..65535  

trapsReceiverAddr 1.3.6.1.4.1.2468.1.4.2.1.2.1.7.1.2
The IP address of the manager to send a trap to.
OBJECT-TYPE    
  IpAddress  

receiverCommunityString 1.3.6.1.4.1.2468.1.4.2.1.2.1.7.1.3
The community name to use in the trap when sent to the manager.
OBJECT-TYPE    
  DisplayString Size(0..15)  

receiverNmsType 1.3.6.1.4.1.2468.1.4.2.1.2.1.7.1.4
The trap group that NMS desired.
OBJECT-TYPE    
  INTEGER none(1), iPoManII-trap(2)  

receiverSeverityLevel 1.3.6.1.4.1.2468.1.4.2.1.2.1.7.1.5
The severity level of traps to be received by this manager.
OBJECT-TYPE    
  INTEGER informational(1), warning(2), severe(3)  

receiverDescription 1.3.6.1.4.1.2468.1.4.2.1.2.1.7.1.6
Description of trap receivers
OBJECT-TYPE    
  DisplayString Size(0..31)  

ipmAgentAccessControlTable 1.3.6.1.4.1.2468.1.4.2.1.2.1.8
A list of managers which can access the device with private community string.
OBJECT-TYPE    
  SEQUENCE OF  
    IpmAgentAccessControlEntry

ipmAgentAccessControlEntry 1.3.6.1.4.1.2468.1.4.2.1.2.1.8.1
The managers.
OBJECT-TYPE    
  IpmAgentAccessControlEntry  

accessIndex 1.3.6.1.4.1.2468.1.4.2.1.2.1.8.1.1
The index to a access control entry.
OBJECT-TYPE    
  INTEGER 0..65535  

accessControlAddr 1.3.6.1.4.1.2468.1.4.2.1.2.1.8.1.2
The IP address of the manager to access the device.
OBJECT-TYPE    
  IpAddress  

accessControlMode 1.3.6.1.4.1.2468.1.4.2.1.2.1.8.1.3
Access type, only read/Write access type can change parameter of the device.
OBJECT-TYPE    
  INTEGER permitted(1), denied(2)  

ipmDeviceInlet 1.3.6.1.4.1.2468.1.4.2.1.3.1
OBJECT IDENTIFIER    

ipmDeviceInletNumber 1.3.6.1.4.1.2468.1.4.2.1.3.1.1
The inlet number on this device.
OBJECT-TYPE    
  INTEGER  

ipmDeviceInletConfigTable 1.3.6.1.4.1.2468.1.4.2.1.3.1.2
A list of inlet on this device.
OBJECT-TYPE    
  SEQUENCE OF  
    IpmDeviceInletConfigEntry

ipmDeviceInletConfigEntry 1.3.6.1.4.1.2468.1.4.2.1.3.1.2.1
The inlet number of device.
OBJECT-TYPE    
  IpmDeviceInletConfigEntry  

inletConfigIndex 1.3.6.1.4.1.2468.1.4.2.1.3.1.2.1.1
The index to a access inlet configuration table.
OBJECT-TYPE    
  INTEGER 0..65535  

inletConfigDesc 1.3.6.1.4.1.2468.1.4.2.1.3.1.2.1.2
A Description of inlet of device.
OBJECT-TYPE    
  DisplayString Size(0..31)  

inletConfigVoltageHigh 1.3.6.1.4.1.2468.1.4.2.1.3.1.2.1.3
The Inlet high voltage threshold, in volts.
OBJECT-TYPE    
  INTEGER 1..65500  

inletConfigVoltageHighAction 1.3.6.1.4.1.2468.1.4.2.1.3.1.2.1.4
Reaction of the device when inlet voltage higher than set point.
OBJECT-TYPE    
  INTEGER outletsOff(1), nothing(2)  

inletConfigVoltageLow 1.3.6.1.4.1.2468.1.4.2.1.3.1.2.1.5
The Inlet low voltage threshold, in volts.
OBJECT-TYPE    
  INTEGER 1..65500  

inletConfigVoltageLowAction 1.3.6.1.4.1.2468.1.4.2.1.3.1.2.1.6
Reaction of the device when inlet voltage lower than set point.
OBJECT-TYPE    
  INTEGER outletsOff(1), nothing(2)  

inletConfigCurrentHigh 1.3.6.1.4.1.2468.1.4.2.1.3.1.2.1.7
The Inlet low voltage threshold, in 0.1 amps.
OBJECT-TYPE    
  INTEGER 1..160  

inletConfigCurrentHighAction 1.3.6.1.4.1.2468.1.4.2.1.3.1.2.1.8
Reaction of the device when inlet current higher than set point.
OBJECT-TYPE    
  INTEGER outletsOff(1), nothing(2)  

inletConfigFrequencyHigh 1.3.6.1.4.1.2468.1.4.2.1.3.1.2.1.9
The Inlet high frequency threshold, in hz.
OBJECT-TYPE    
  INTEGER 1..65500  

inletConfigfrequencyHighAction 1.3.6.1.4.1.2468.1.4.2.1.3.1.2.1.10
Reaction of the device when inlet frequency higher than set point.
OBJECT-TYPE    
  INTEGER outletsOff(1), nothing(2)  

inletConfigFrequencyLow 1.3.6.1.4.1.2468.1.4.2.1.3.1.2.1.11
The Inlet low frequency threshold, in hz.
OBJECT-TYPE    
  INTEGER 1..65500  

inletConfigfrequencyLowAction 1.3.6.1.4.1.2468.1.4.2.1.3.1.2.1.12
Reaction of the device when inlet frequency lower than set point.
OBJECT-TYPE    
  INTEGER outletsOff(1), nothing(2)  

ipmDeviceInletStatusTable 1.3.6.1.4.1.2468.1.4.2.1.3.1.3
A list of inlet on this device.
OBJECT-TYPE    
  SEQUENCE OF  
    IpmDeviceInletStatusEntry

ipmDeviceInletStatusEntry 1.3.6.1.4.1.2468.1.4.2.1.3.1.3.1
The inlet number of device.
OBJECT-TYPE    
  IpmDeviceInletStatusEntry  

inletStatusIndex 1.3.6.1.4.1.2468.1.4.2.1.3.1.3.1.1
The index to a access inlet configuration table.
OBJECT-TYPE    
  INTEGER 0..65535  

inletStatusVoltage 1.3.6.1.4.1.2468.1.4.2.1.3.1.3.1.2
The Inlet Voltage in 0.1 volts
OBJECT-TYPE    
  INTEGER 1..65500  

inletStatusCurrent 1.3.6.1.4.1.2468.1.4.2.1.3.1.3.1.3
The Inlet Current in 0.001 Amp.
OBJECT-TYPE    
  INTEGER 0..65500  

inletStatusFrequency 1.3.6.1.4.1.2468.1.4.2.1.3.1.3.1.4
The Inlet Frequency in 0.1 Hz
OBJECT-TYPE    
  INTEGER 1..65500  

inletStatusKwatt 1.3.6.1.4.1.2468.1.4.2.1.3.1.3.1.5
The Inlet Kwatt in 0.1 KW/H
OBJECT-TYPE    
  INTEGER 0..65500  

inletStatusWH 1.3.6.1.4.1.2468.1.4.2.1.3.1.3.1.6
The Inlet Kwatt in 0.1 W/H
OBJECT-TYPE    
  INTEGER 1..65500  

inletWattReset 1.3.6.1.4.1.2468.1.4.2.1.3.1.4
Reset inlet kw.
OBJECT-TYPE    
  INTEGER none(1), inlet1(2), inlet2(3)  

ipmDeviceOutlet 1.3.6.1.4.1.2468.1.4.2.1.3.2
OBJECT IDENTIFIER    

ipmDeviceOutletNumber 1.3.6.1.4.1.2468.1.4.2.1.3.2.1
The outlet number on this device.
OBJECT-TYPE    
  INTEGER  

ipmDeviceOutletConfigTable 1.3.6.1.4.1.2468.1.4.2.1.3.2.2
A list of outlet on this device.
OBJECT-TYPE    
  SEQUENCE OF  
    IpmDeviceOutletConfigEntry

ipmDeviceOutletConfigEntry 1.3.6.1.4.1.2468.1.4.2.1.3.2.2.1
The inlet number of device.
OBJECT-TYPE    
  IpmDeviceOutletConfigEntry  

outletConfigIndex 1.3.6.1.4.1.2468.1.4.2.1.3.2.2.1.1
The index to a access inlet configuration table.
OBJECT-TYPE    
  INTEGER  

outletConfigDesc 1.3.6.1.4.1.2468.1.4.2.1.3.2.2.1.2
A Description of outlet of device.
OBJECT-TYPE    
  DisplayString Size(0..31)  

outletConfigLocation 1.3.6.1.4.1.2468.1.4.2.1.3.2.2.1.3
Location of device connectted to this outlet.
OBJECT-TYPE    
  DisplayString Size(0..31)  

outletConfigOnDelay 1.3.6.1.4.1.2468.1.4.2.1.3.2.2.1.4
The delay time before turn on tis outlet, in seconds.
OBJECT-TYPE    
  INTEGER  

outletConfigOffDelay 1.3.6.1.4.1.2468.1.4.2.1.3.2.2.1.5
The delay time before turn off tis outlet, in seconds.
OBJECT-TYPE    
  INTEGER  

outletConfigCurrentHigh 1.3.6.1.4.1.2468.1.4.2.1.3.2.2.1.6
The outlet high current threshold, in amp.
OBJECT-TYPE    
  INTEGER 1..65500  

outletConfigCurrentHighAction 1.3.6.1.4.1.2468.1.4.2.1.3.2.2.1.7
Reaction of the device when outlet current higher than set point.
OBJECT-TYPE    
  INTEGER outletOff(1), nothing(2)  

ipmDeviceOutletStatusTable 1.3.6.1.4.1.2468.1.4.2.1.3.2.3
A list of outlet on this device.
OBJECT-TYPE    
  SEQUENCE OF  
    IpmDeviceOutletStatusEntry

ipmDeviceOutletStatusEntry 1.3.6.1.4.1.2468.1.4.2.1.3.2.3.1
The outlet number of device.
OBJECT-TYPE    
  IpmDeviceOutletStatusEntry  

outletStatusIndex 1.3.6.1.4.1.2468.1.4.2.1.3.2.3.1.1
The index to a access outlet configuration table.
OBJECT-TYPE    
  INTEGER 0..65535  

outletStatusStatus 1.3.6.1.4.1.2468.1.4.2.1.3.2.3.1.2
Outlet state
OBJECT-TYPE    
  INTEGER unknow(1), outletOff(2), outletOn(3), outletOffToOn(4), outletOnToOff(5), outletCycling(6)  

outletStatusCurrent 1.3.6.1.4.1.2468.1.4.2.1.3.2.3.1.3
The outlet Current in 0.001 Amp.
OBJECT-TYPE    
  INTEGER 0..65500  

outletStatusKwatt 1.3.6.1.4.1.2468.1.4.2.1.3.2.3.1.4
The outlet Kwatt in 0.001 KW/H.
OBJECT-TYPE    
  INTEGER 0..65500  

outletStatusWH 1.3.6.1.4.1.2468.1.4.2.1.3.2.3.1.5
The outlet Watt in 0.1 W/H.
OBJECT-TYPE    
  INTEGER 0..65500  

outletStatusStateTime 1.3.6.1.4.1.2468.1.4.2.1.3.2.3.1.6
Time in seconds since the outlet changed to current state.
OBJECT-TYPE    
  INTEGER  

outletStatusTimeToGo 1.3.6.1.4.1.2468.1.4.2.1.3.2.3.1.7
Remain time the outlet state will be changed by agent, in seconds
OBJECT-TYPE    
  INTEGER  

ipmDeviceOutletControlTable 1.3.6.1.4.1.2468.1.4.2.1.3.2.4
A list of outlet on this device.
OBJECT-TYPE    
  SEQUENCE OF  
    IpmDeviceOutletControlEntry

ipmDeviceOutletControlEntry 1.3.6.1.4.1.2468.1.4.2.1.3.2.4.1
The outlet number of device.
OBJECT-TYPE    
  IpmDeviceOutletControlEntry  

outletControlIndex 1.3.6.1.4.1.2468.1.4.2.1.3.2.4.1.1
The index to a access outlet configuration table.
OBJECT-TYPE    
  INTEGER 0..65535  

outletControlControl 1.3.6.1.4.1.2468.1.4.2.1.3.2.4.1.2
Set to control the outlet perform action as requested.
OBJECT-TYPE    
  INTEGER none(1), cancelAction(2), onImmediately(3), offImmediately(4), cycleImmediately(5), onByActionTimer(6), offByActionTimer(7), cycleByActionTimer(8), onThenOffByActionTimers(9), offThenOnByActionTimers(10)  

ipmDeviceOutletControlAll 1.3.6.1.4.1.2468.1.4.2.1.3.2.5
Set to control all outlets perform action as requested.
OBJECT-TYPE    
  INTEGER none(1), cancelAction(2), onImmediately(3), offImmediately(4), cycleImmediately(5), onByActionTimers(6), offByActionTimers(7), cycleByActionTimers(8), onThenOffByActionTimers(9), offThenOnByActionTimers(10)  

ipmDeviceOutletWattReset 1.3.6.1.4.1.2468.1.4.2.1.3.2.6
Reset outlet kw.
OBJECT-TYPE    
  INTEGER none(1), outleta(2), outletb(3), outletc(4), outletd(5), outlete(6), outletf(7), outletg(8), outleth(9), outleti(10), outletj(11), outletk(12), outletl(13)  

ipmDeviceCcOut 1.3.6.1.4.1.2468.1.4.2.1.3.3
OBJECT IDENTIFIER    

ipmDeviceCcOutNumber 1.3.6.1.4.1.2468.1.4.2.1.3.3.1
The contact closure output number on this device.
OBJECT-TYPE    
  INTEGER  

ipmDeviceCcOutConfigTable 1.3.6.1.4.1.2468.1.4.2.1.3.3.2
A list of contact closure output on this device.
OBJECT-TYPE    
  SEQUENCE OF  
    IpmDeviceCcOutConfigEntry

ipmDeviceCcOutConfigEntry 1.3.6.1.4.1.2468.1.4.2.1.3.3.2.1
The CC number of device.
OBJECT-TYPE    
  IpmDeviceCcOutConfigEntry  

ccOutConfigIndex 1.3.6.1.4.1.2468.1.4.2.1.3.3.2.1.1
The index to access contact closure output configuration table.
OBJECT-TYPE    
  INTEGER 0..65535  

ccOutConfigDesc 1.3.6.1.4.1.2468.1.4.2.1.3.3.2.1.2
A Description of a contact closure output of device.
OBJECT-TYPE    
  DisplayString Size(0..31)  

ccOutConfigEventAction 1.3.6.1.4.1.2468.1.4.2.1.3.3.2.1.3
Enable/disble the contact closure output to react to events.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

ccOutConfigCloseDelay 1.3.6.1.4.1.2468.1.4.2.1.3.3.2.1.4
The delay time in seconds when the contact closure output set to close.
OBJECT-TYPE    
  INTEGER  

ccOutConfigOpenDelay 1.3.6.1.4.1.2468.1.4.2.1.3.3.2.1.5
The delay time in seconds when the contact closure output set to open.
OBJECT-TYPE    
  INTEGER  

ipmDeviceCcOutStatusTable 1.3.6.1.4.1.2468.1.4.2.1.3.3.3
A list of contact closure output on this device.
OBJECT-TYPE    
  SEQUENCE OF  
    IpmDeviceCcOutStatusEntry

ipmDeviceCcOutStatusEntry 1.3.6.1.4.1.2468.1.4.2.1.3.3.3.1
The CC number of device.
OBJECT-TYPE    
  IpmDeviceCcOutStatusEntry  

ccOutStatusIndex 1.3.6.1.4.1.2468.1.4.2.1.3.3.3.1.1
The index to access contact closure output configuration table.
OBJECT-TYPE    
  INTEGER 0..65535  

ccOutStatusStatus 1.3.6.1.4.1.2468.1.4.2.1.3.3.3.1.2
State of a contact closure output of device.
OBJECT-TYPE    
  INTEGER closed(1), open(2)  

ccOutStatusTimeOnState 1.3.6.1.4.1.2468.1.4.2.1.3.3.3.1.3
Time in seconds since the contact closure output changed to current state.
OBJECT-TYPE    
  INTEGER  

ipmDeviceCcOutControlTable 1.3.6.1.4.1.2468.1.4.2.1.3.3.4
A list of contact closure output on this device.
OBJECT-TYPE    
  SEQUENCE OF  
    IpmDeviceCcOutControlEntry

ipmDeviceCcOutControlEntry 1.3.6.1.4.1.2468.1.4.2.1.3.3.4.1
The outlet number of device.
OBJECT-TYPE    
  IpmDeviceCcOutControlEntry  

ccOutControlIndex 1.3.6.1.4.1.2468.1.4.2.1.3.3.4.1.1
The index to a access contact closure output configuration table.
OBJECT-TYPE    
  INTEGER 0..65535  

ccOutControlControl 1.3.6.1.4.1.2468.1.4.2.1.3.3.4.1.2
Set to control the contact closure output perform action as requested.
OBJECT-TYPE    
  INTEGER none(1), cancelAction(2), closeImmediately(3), openImmediately(4), cycleImmediately(5), closeByCloseTimer(6), openByOpenTimer(7), cycleByActionTimer(8), closeThenOpenByActionTimers(9), openThenCloseByActionTimers(10)  

ipmSlaveState 1.3.6.1.4.1.2468.1.4.2.1.4.1
OBJECT IDENTIFIER    

ipmSlaveStateTable 1.3.6.1.4.1.2468.1.4.2.1.4.1.1
A list of outlet on this device.
OBJECT-TYPE    
  SEQUENCE OF  
    IpmSlaveStateEntry

ipmSlaveStateEntry 1.3.6.1.4.1.2468.1.4.2.1.4.1.1.1
The outlet number of device.
OBJECT-TYPE    
  IpmSlaveStateEntry  

slaveStateIndex 1.3.6.1.4.1.2468.1.4.2.1.4.1.1.1.1
The index to a access outlet configuration table.
OBJECT-TYPE    
  INTEGER 0..65535  

slaveStateControl01 1.3.6.1.4.1.2468.1.4.2.1.4.1.1.1.2
Set to control the outlet perform action as requested to slave outlet A
OBJECT-TYPE    
  INTEGER disconnected(1), connected(2)  

ipmSlaveInlet 1.3.6.1.4.1.2468.1.4.2.1.4.2
OBJECT IDENTIFIER    

ipmSlaveInletStatus 1.3.6.1.4.1.2468.1.4.2.1.4.2.1
OBJECT IDENTIFIER    

ipmDeviceSlaveInletStatusTable 1.3.6.1.4.1.2468.1.4.2.1.4.2.1.1
A list of inlet on this device.
OBJECT-TYPE    
  SEQUENCE OF  
    IpmDeviceSlaveInletStatusEntry

ipmDeviceSlaveInletStatusEntry 1.3.6.1.4.1.2468.1.4.2.1.4.2.1.1.1
The inlet number of device.
OBJECT-TYPE    
  IpmDeviceSlaveInletStatusEntry  

inletSlaveStatusIndex 1.3.6.1.4.1.2468.1.4.2.1.4.2.1.1.1.1
The index to a access inlet configuration table.
OBJECT-TYPE    
  INTEGER 0..65535  

inletSlaveStatusVoltage 1.3.6.1.4.1.2468.1.4.2.1.4.2.1.1.1.2
The Inlet Voltage in 0.1 volts
OBJECT-TYPE    
  INTEGER 1..65500  

inletSlaveStatusCurrent 1.3.6.1.4.1.2468.1.4.2.1.4.2.1.1.1.3
The Inlet Current in 0.001 Amp.
OBJECT-TYPE    
  INTEGER 0..65500  

inletSlaveStatusFrequency 1.3.6.1.4.1.2468.1.4.2.1.4.2.1.1.1.4
The Inlet Frequency in 0.1 Hz
OBJECT-TYPE    
  INTEGER 1..65500  

inletSlaveStatusKwatt 1.3.6.1.4.1.2468.1.4.2.1.4.2.1.1.1.5
The Inlet Kwatt in 0.001 KW/H
OBJECT-TYPE    
  INTEGER 0..65500  

inletSlaveStatusWH 1.3.6.1.4.1.2468.1.4.2.1.4.2.1.1.1.6
The Inlet Kwatt in 0.001 KW/H
OBJECT-TYPE    
  INTEGER 1..65500  

inletSlaveStatusVoltage2 1.3.6.1.4.1.2468.1.4.2.1.4.2.1.1.1.7
The Inlet Voltage in 0.1 volts
OBJECT-TYPE    
  INTEGER 1..65500  

inletSlaveStatusCurrent2 1.3.6.1.4.1.2468.1.4.2.1.4.2.1.1.1.8
The Inlet Current in 0.001 Amp.
OBJECT-TYPE    
  INTEGER 0..65500  

inletSlaveStatusFrequency2 1.3.6.1.4.1.2468.1.4.2.1.4.2.1.1.1.9
The Inlet Frequency in 0.1 Hz
OBJECT-TYPE    
  INTEGER 1..65500  

inletSlaveStatusKwatt2 1.3.6.1.4.1.2468.1.4.2.1.4.2.1.1.1.10
The Inlet Kwatt in 0.001 KW/H
OBJECT-TYPE    
  INTEGER 0..65500  

inletSlaveStatusWH2 1.3.6.1.4.1.2468.1.4.2.1.4.2.1.1.1.11
The Inlet Kwatt in 0.001 KW/H
OBJECT-TYPE    
  INTEGER 1..65500  

ipmSlaveInletConfig 1.3.6.1.4.1.2468.1.4.2.1.4.2.2
OBJECT IDENTIFIER    

ipmDeviceslaveInletConfigTable 1.3.6.1.4.1.2468.1.4.2.1.4.2.2.1
A list of inlet on this device.
OBJECT-TYPE    
  SEQUENCE OF  
    IpmDeviceslaveInletConfigEntry

ipmDeviceslaveInletConfigEntry 1.3.6.1.4.1.2468.1.4.2.1.4.2.2.1.1
The inlet number of device.
OBJECT-TYPE    
  IpmDeviceslaveInletConfigEntry  

slaveInletConfigIndex 1.3.6.1.4.1.2468.1.4.2.1.4.2.2.1.1.1
The index to a access inlet configuration table.
OBJECT-TYPE    
  INTEGER 0..65535  

slaveInletConfigVoltageHigh 1.3.6.1.4.1.2468.1.4.2.1.4.2.2.1.1.2
The Inlet high voltage threshold, in volts.
OBJECT-TYPE    
  INTEGER 1..65500  

slaveInletConfigVoltageLow 1.3.6.1.4.1.2468.1.4.2.1.4.2.2.1.1.3
The Inlet low voltage threshold, in volts.
OBJECT-TYPE    
  INTEGER 1..65500  

slaveInlet2ConfigVoltageHigh 1.3.6.1.4.1.2468.1.4.2.1.4.2.2.1.1.4
The Inlet 2 high voltage threshold, in volts.
OBJECT-TYPE    
  INTEGER 1..65500  

slaveInlet2ConfigVoltageLow 1.3.6.1.4.1.2468.1.4.2.1.4.2.2.1.1.5
The Inlet low voltage threshold, in volts.
OBJECT-TYPE    
  INTEGER 1..65500  

ipmSlaveOutlet 1.3.6.1.4.1.2468.1.4.2.1.4.3
OBJECT IDENTIFIER    

ipmSlaveOutletConfig 1.3.6.1.4.1.2468.1.4.2.1.4.3.1
OBJECT IDENTIFIER    

ipmSlaveDeviceOutletNameTable 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.1
A list of outlet on this device.
OBJECT-TYPE    
  SEQUENCE OF  
    IpmSlaveDeviceOutletNameEntry

ipmSlaveDeviceOutletNameEntry 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.1.1
The outlet number of device.
OBJECT-TYPE    
  IpmSlaveDeviceOutletNameEntry  

slaveOutletNameIndex 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.1.1.1
The index to a access outlet configuration table.
OBJECT-TYPE    
  INTEGER 0..65535  

slaveOutletName01 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.1.1.2
A Description of a outlet name of device.
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletName02 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.1.1.3
A Description of a outlet name of device.
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletName03 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.1.1.4
A Description of a outlet name of device.
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletName04 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.1.1.5
A Description of a outlet name of device.
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletName05 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.1.1.6
A Description of a outlet name of device.
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletName06 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.1.1.7
A Description of a outlet name of device.
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletName07 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.1.1.8
A Description of a outlet name of device.
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletName08 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.1.1.9
A Description of a outlet name of device.
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletName09 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.1.1.10
A Description of a outlet name of device.
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletName10 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.1.1.11
A Description of a outlet name of device.
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletName11 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.1.1.12
A Description of a outlet name of device.
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletName12 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.1.1.13
A Description of a outlet name of device.
OBJECT-TYPE    
  DisplayString Size(0..31)  

ipmSlaveDeviceOutletLocationTable 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.2
A list of outlet on this device.
OBJECT-TYPE    
  SEQUENCE OF  
    IpmSlaveDeviceOutletLocationEntry

ipmSlaveDeviceOutletLocationEntry 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.2.1
The outlet number of device.
OBJECT-TYPE    
  IpmSlaveDeviceOutletLocationEntry  

slaveOutletLocationIndex 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.2.1.1
The index to a access outlet configuration table.
OBJECT-TYPE    
  INTEGER 0..65535  

slaveOutletLocation01 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.2.1.2
A Description of a outlet name of device.
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletLocation02 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.2.1.3
A Description of a outlet name of device.
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletLocation03 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.2.1.4
A Description of a outlet name of device.
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletLocation04 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.2.1.5
A Description of a outlet name of device.
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletLocation05 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.2.1.6
A Description of a outlet name of device.
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletLocation06 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.2.1.7
A Description of a outlet name of device.
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletLocation07 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.2.1.8
A Description of a outlet name of device.
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletLocation08 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.2.1.9
A Description of a outlet name of device.
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletLocation09 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.2.1.10
A Description of a outlet name of device.
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletLocation10 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.2.1.11
A Description of a outlet name of device.
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletLocation11 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.2.1.12
A Description of a outlet name of device.
OBJECT-TYPE    
  DisplayString Size(0..31)  

slaveOutletLocation12 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.2.1.13
A Description of a outlet name of device.
OBJECT-TYPE    
  DisplayString Size(0..31)  

ipmSlaveDeviceOutletOnTimeTable 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.3
A list of outlet on this device.
OBJECT-TYPE    
  SEQUENCE OF  
    IpmSlaveDeviceOutletOnTimeEntry

ipmSlaveDeviceOutletOnTimeEntry 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.3.1
The outlet number of device.
OBJECT-TYPE    
  IpmSlaveDeviceOutletOnTimeEntry  

slaveOutletOnTimeIndex 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.3.1.1
The index to a access outlet configuration table.
OBJECT-TYPE    
  INTEGER 0..65535  

slaveOutletOnTime01 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.3.1.2
The delay time before turn on tis outlet, in seconds.
OBJECT-TYPE    
  INTEGER  

slaveOutletOnTime02 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.3.1.3
The delay time before turn on tis outlet, in seconds.
OBJECT-TYPE    
  INTEGER  

slaveOutletOnTime03 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.3.1.4
The delay time before turn on tis outlet, in seconds.
OBJECT-TYPE    
  INTEGER  

slaveOutletOnTime04 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.3.1.5
The delay time before turn on tis outlet, in seconds.
OBJECT-TYPE    
  INTEGER  

slaveOutletOnTime05 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.3.1.6
The delay time before turn on tis outlet, in seconds.
OBJECT-TYPE    
  INTEGER  

slaveOutletOnTime06 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.3.1.7
The delay time before turn on tis outlet, in seconds.
OBJECT-TYPE    
  INTEGER  

slaveOutletOnTime07 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.3.1.8
The delay time before turn on tis outlet, in seconds.
OBJECT-TYPE    
  INTEGER  

slaveOutletOnTime08 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.3.1.9
The delay time before turn on tis outlet, in seconds.
OBJECT-TYPE    
  INTEGER  

slaveOutletOnTime09 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.3.1.10
The delay time before turn on tis outlet, in seconds.
OBJECT-TYPE    
  INTEGER  

slaveOutletOnTime10 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.3.1.11
The delay time before turn on tis outlet, in seconds.
OBJECT-TYPE    
  INTEGER  

slaveOutletOnTime11 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.3.1.12
The delay time before turn on tis outlet, in seconds.
OBJECT-TYPE    
  INTEGER  

slaveOutletOnTime12 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.3.1.13
The delay time before turn on tis outlet, in seconds.
OBJECT-TYPE    
  INTEGER  

ipmSlaveDeviceOutletOffTimeTable 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.4
A list of outlet on this device.
OBJECT-TYPE    
  SEQUENCE OF  
    IpmSlaveDeviceOutletOffTimeEntry

ipmSlaveDeviceOutletOffTimeEntry 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.4.1
The outlet number of device.
OBJECT-TYPE    
  IpmSlaveDeviceOutletOffTimeEntry  

slaveOutletOffTimeIndex 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.4.1.1
The index to a access outlet configuration table.
OBJECT-TYPE    
  INTEGER 0..65535  

slaveOutletOffTime01 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.4.1.2
The delay time before turn on tis outlet, in seconds.
OBJECT-TYPE    
  INTEGER  

slaveOutletOffTime02 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.4.1.3
The delay time before turn on tis outlet, in seconds.
OBJECT-TYPE    
  INTEGER  

slaveOutletOffTime03 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.4.1.4
The delay time before turn on tis outlet, in seconds.
OBJECT-TYPE    
  INTEGER  

slaveOutletOffTime04 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.4.1.5
The delay time before turn on tis outlet, in seconds.
OBJECT-TYPE    
  INTEGER  

slaveOutletOffTime05 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.4.1.6
The delay time before turn on tis outlet, in seconds.
OBJECT-TYPE    
  INTEGER  

slaveOutletOffTime06 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.4.1.7
The delay time before turn on tis outlet, in seconds.
OBJECT-TYPE    
  INTEGER  

slaveOutletOffTime07 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.4.1.8
The delay time before turn on tis outlet, in seconds.
OBJECT-TYPE    
  INTEGER  

slaveOutletOffTime08 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.4.1.9
The delay time before turn on tis outlet, in seconds.
OBJECT-TYPE    
  INTEGER  

slaveOutletOffTime09 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.4.1.10
The delay time before turn on tis outlet, in seconds.
OBJECT-TYPE    
  INTEGER  

slaveOutletOffTime10 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.4.1.11
The delay time before turn on tis outlet, in seconds.
OBJECT-TYPE    
  INTEGER  

slaveOutletOffTime11 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.4.1.12
The delay time before turn on tis outlet, in seconds.
OBJECT-TYPE    
  INTEGER  

slaveOutletOffTime12 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.4.1.13
The delay time before turn on tis outlet, in seconds.
OBJECT-TYPE    
  INTEGER  

ipmSlaveDeviceOutletCurrThTable 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.5
A list of outlet on this device.
OBJECT-TYPE    
  SEQUENCE OF  
    IpmSlaveDeviceOutletCurrThEntry

ipmSlaveDeviceOutletCurrThEntry 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.5.1
The outlet number of device.
OBJECT-TYPE    
  IpmSlaveDeviceOutletCurrThEntry  

slaveOutletCurrThIndex 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.5.1.1
The index to a access outlet configuration table.
OBJECT-TYPE    
  INTEGER 0..65535  

slaveOutletCurrTh01 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.5.1.2
The Outlet Current Threshold ,in 0.1 Amp.
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrTh02 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.5.1.3
The Outlet Current Threshold ,in 0.1 Amp.
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrTh03 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.5.1.4
The Outlet Current Threshold ,in 0.1 Amp.
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrTh04 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.5.1.5
The Outlet Current Threshold ,in 0.1 Amp.
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrTh05 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.5.1.6
The Outlet Current Threshold ,in 0.1 Amp.
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrTh06 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.5.1.7
The Outlet Current Threshold ,in 0.1 Amp.
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrTh07 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.5.1.8
The Outlet Current Threshold ,in 0.1 Amp.
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrTh08 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.5.1.9
The Outlet Current Threshold ,in 0.1 Amp.
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrTh09 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.5.1.10
The Outlet Current Threshold ,in 0.1 Amp.
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrTh10 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.5.1.11
The Outlet Current Threshold ,in 0.1 Amp.
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrTh11 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.5.1.12
The Outlet Current Threshold ,in 0.1 Amp.
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrTh12 1.3.6.1.4.1.2468.1.4.2.1.4.3.1.5.1.13
The Outlet Current Threshold ,in 0.1 Amp.
OBJECT-TYPE    
  INTEGER  

ipmSlaveOutletStatus 1.3.6.1.4.1.2468.1.4.2.1.4.3.2
OBJECT IDENTIFIER    

ipmSlaveDeviceOutletCurrentTable 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.1
A list of outlet on this device.
OBJECT-TYPE    
  SEQUENCE OF  
    IpmSlaveDeviceOutletCurrentEntry

ipmSlaveDeviceOutletCurrentEntry 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.1.1
The outlet number of device.
OBJECT-TYPE    
  IpmSlaveDeviceOutletCurrentEntry  

slaveOutletCurrentIndex 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.1.1.1
The index to a access outlet configuration table.
OBJECT-TYPE    
  INTEGER 0..65535  

slaveOutletCurrent01 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.1.1.2
The outlet A Current in 0.001 Amp.
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrent02 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.1.1.3
The outlet B Current in 0.001 Amp.
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrent03 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.1.1.4
The outlet C Current in 0.001 Amp.
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrent04 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.1.1.5
The outlet D Current in 0.001 Amp.
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrent05 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.1.1.6
The outlet E Current in 0.001 Amp.
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrent06 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.1.1.7
The outlet F Current in 0.001 Amp.
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrent07 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.1.1.8
The outlet G Current in 0.001 Amp.
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrent08 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.1.1.9
The outlet H Current in 0.001 Amp.
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrent09 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.1.1.10
The outlet I Current in 0.001 Amp.
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrent10 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.1.1.11
The outlet J Current in 0.001 Amp.
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrent11 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.1.1.12
The outlet K Current in 0.001 Amp.
OBJECT-TYPE    
  INTEGER  

slaveOutletCurrent12 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.1.1.13
The outlet L Current in 0.001 Amp.
OBJECT-TYPE    
  INTEGER  

ipmSlaveDeviceOutletWattTable 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.2
A list of outlet on this device.
OBJECT-TYPE    
  SEQUENCE OF  
    IpmSlaveDeviceOutletWattEntry

ipmSlaveDeviceOutletWattEntry 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.2.1
The outlet number of device.
OBJECT-TYPE    
  IpmSlaveDeviceOutletWattEntry  

slaveOutletWattIndex 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.2.1.1
The index to a access outlet configuration table.
OBJECT-TYPE    
  INTEGER 0..65535  

slaveOutletWatt01 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.2.1.2
The outlet A Watt in 0.1 W/H.
OBJECT-TYPE    
  INTEGER  

slaveOutletWatt02 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.2.1.3
The outlet B Watt in 0.1 W/H.
OBJECT-TYPE    
  INTEGER  

slaveOutletWatt03 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.2.1.4
The outlet C Watt in 0.1 W/H.
OBJECT-TYPE    
  INTEGER  

slaveOutletWatt04 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.2.1.5
The outlet D Watt in 0.1 W/H.
OBJECT-TYPE    
  INTEGER  

slaveOutletWatt05 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.2.1.6
The outlet E Watt in 0.1 W/H.
OBJECT-TYPE    
  INTEGER  

slaveOutletWatt06 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.2.1.7
The outlet F Watt in 0.1 W/H.
OBJECT-TYPE    
  INTEGER  

slaveOutletWatt07 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.2.1.8
The outlet G Watt in 0.1 W/H.
OBJECT-TYPE    
  INTEGER  

slaveOutletWatt08 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.2.1.9
The outlet H Watt in 0.1 W/H.
OBJECT-TYPE    
  INTEGER  

slaveOutletWatt09 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.2.1.10
The outlet I Watt in 0.1 W/H.
OBJECT-TYPE    
  INTEGER  

slaveOutletWatt10 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.2.1.11
The outlet J Watt in 0.1 W/H.
OBJECT-TYPE    
  INTEGER  

slaveOutletWatt11 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.2.1.12
The outlet K Watt in 0.1 W/H.
OBJECT-TYPE    
  INTEGER  

slaveOutletWatt12 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.2.1.13
The outlet L Watt in 0.1 W/H.
OBJECT-TYPE    
  INTEGER  

ipmSlaveDeviceOutletKwattTable 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.3
A list of outlet on this device.
OBJECT-TYPE    
  SEQUENCE OF  
    IpmSlaveDeviceOutletKwattEntry

ipmSlaveDeviceOutletKwattEntry 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.3.1
The outlet number of device.
OBJECT-TYPE    
  IpmSlaveDeviceOutletKwattEntry  

slaveOutletKwattIndex 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.3.1.1
The index to a access outlet configuration table.
OBJECT-TYPE    
  INTEGER 0..65535  

slaveOutletKwatt01 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.3.1.2
The outlet A Kwatt in 0.001 KW/H.
OBJECT-TYPE    
  INTEGER  

slaveOutletKwatt02 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.3.1.3
The outlet B Kwatt in 0.001 KW/H.
OBJECT-TYPE    
  INTEGER  

slaveOutletKwatt03 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.3.1.4
The outlet C Kwatt in 0.001 KW/H.
OBJECT-TYPE    
  INTEGER  

slaveOutletKwatt04 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.3.1.5
The outlet D Kwatt in 0.001 KW/H.
OBJECT-TYPE    
  INTEGER  

slaveOutletKwatt05 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.3.1.6
The outlet E Kwatt in 0.001 KW/H.
OBJECT-TYPE    
  INTEGER  

slaveOutletKwatt06 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.3.1.7
The outlet F Kwatt in 0.001 KW/H.
OBJECT-TYPE    
  INTEGER  

slaveOutletKwatt07 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.3.1.8
The outlet G Kwatt in 0.001 KW/H.
OBJECT-TYPE    
  INTEGER  

slaveOutletKwatt08 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.3.1.9
The outlet H Kwatt in 0.001 KW/H.
OBJECT-TYPE    
  INTEGER  

slaveOutletKwatt09 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.3.1.10
The outlet I Kwatt in 0.001 KW/H.
OBJECT-TYPE    
  INTEGER  

slaveOutletKwatt10 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.3.1.11
The outlet J Kwatt in 0.001 KW/H.
OBJECT-TYPE    
  INTEGER  

slaveOutletKwatt11 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.3.1.12
The outlet K Kwatt in 0.001 KW/H.
OBJECT-TYPE    
  INTEGER  

slaveOutletKwatt12 1.3.6.1.4.1.2468.1.4.2.1.4.3.2.3.1.13
The outlet L Kwatt in 0.001 KW/H.
OBJECT-TYPE    
  INTEGER  

ipmSlaveOutletAction 1.3.6.1.4.1.2468.1.4.2.1.4.3.3
OBJECT IDENTIFIER    

ipmSlaveDeviceOutletActionTable 1.3.6.1.4.1.2468.1.4.2.1.4.3.3.1
A list of outlet on this device.
OBJECT-TYPE    
  SEQUENCE OF  
    IpmSlaveDeviceOutletActionEntry

ipmSlaveDeviceOutletActionEntry 1.3.6.1.4.1.2468.1.4.2.1.4.3.3.1.1
The outlet number of device.
OBJECT-TYPE    
  IpmSlaveDeviceOutletActionEntry  

slaveOutletActionIndex 1.3.6.1.4.1.2468.1.4.2.1.4.3.3.1.1.1
The index to a access outlet configuration table.
OBJECT-TYPE    
  INTEGER 0..65535  

slaveOutletAction01 1.3.6.1.4.1.2468.1.4.2.1.4.3.3.1.1.2
Set to control the outlet perform action as requested.
OBJECT-TYPE    
  INTEGER none(1), cancelAction(2), onImmediately(3), offImmediately(4), cycleImmediately(5), onByActionTimer(6), offByActionTimer(7), cycleByActionTimer(8), onThenOffByActionTimers(9), offThenOnByActionTimers(10)  

slaveOutletAction02 1.3.6.1.4.1.2468.1.4.2.1.4.3.3.1.1.3
Set to control the outlet perform action as requested.
OBJECT-TYPE    
  INTEGER none(1), cancelAction(2), onImmediately(3), offImmediately(4), cycleImmediately(5), onByActionTimer(6), offByActionTimer(7), cycleByActionTimer(8), onThenOffByActionTimers(9), offThenOnByActionTimers(10)  

slaveOutletAction03 1.3.6.1.4.1.2468.1.4.2.1.4.3.3.1.1.4
Set to control the outlet perform action as requested.
OBJECT-TYPE    
  INTEGER none(1), cancelAction(2), onImmediately(3), offImmediately(4), cycleImmediately(5), onByActionTimer(6), offByActionTimer(7), cycleByActionTimer(8), onThenOffByActionTimers(9), offThenOnByActionTimers(10)  

slaveOutletAction04 1.3.6.1.4.1.2468.1.4.2.1.4.3.3.1.1.5
Set to control the outlet perform action as requested.
OBJECT-TYPE    
  INTEGER none(1), cancelAction(2), onImmediately(3), offImmediately(4), cycleImmediately(5), onByActionTimer(6), offByActionTimer(7), cycleByActionTimer(8), onThenOffByActionTimers(9), offThenOnByActionTimers(10)  

slaveOutletAction05 1.3.6.1.4.1.2468.1.4.2.1.4.3.3.1.1.6
Set to control the outlet perform action as requested.
OBJECT-TYPE    
  INTEGER none(1), cancelAction(2), onImmediately(3), offImmediately(4), cycleImmediately(5), onByActionTimer(6), offByActionTimer(7), cycleByActionTimer(8), onThenOffByActionTimers(9), offThenOnByActionTimers(10)  

slaveOutletAction06 1.3.6.1.4.1.2468.1.4.2.1.4.3.3.1.1.7
Set to control the outlet perform action as requested.
OBJECT-TYPE    
  INTEGER none(1), cancelAction(2), onImmediately(3), offImmediately(4), cycleImmediately(5), onByActionTimer(6), offByActionTimer(7), cycleByActionTimer(8), onThenOffByActionTimers(9), offThenOnByActionTimers(10)  

slaveOutletAction07 1.3.6.1.4.1.2468.1.4.2.1.4.3.3.1.1.8
Set to control the outlet perform action as requested.
OBJECT-TYPE    
  INTEGER none(1), cancelAction(2), onImmediately(3), offImmediately(4), cycleImmediately(5), onByActionTimer(6), offByActionTimer(7), cycleByActionTimer(8), onThenOffByActionTimers(9), offThenOnByActionTimers(10)  

slaveOutletAction08 1.3.6.1.4.1.2468.1.4.2.1.4.3.3.1.1.9
Set to control the outlet perform action as requested.
OBJECT-TYPE    
  INTEGER none(1), cancelAction(2), onImmediately(3), offImmediately(4), cycleImmediately(5), onByActionTimer(6), offByActionTimer(7), cycleByActionTimer(8), onThenOffByActionTimers(9), offThenOnByActionTimers(10)  

slaveOutletAction09 1.3.6.1.4.1.2468.1.4.2.1.4.3.3.1.1.10
Set to control the outlet perform action as requested.
OBJECT-TYPE    
  INTEGER none(1), cancelAction(2), onImmediately(3), offImmediately(4), cycleImmediately(5), onByActionTimer(6), offByActionTimer(7), cycleByActionTimer(8), onThenOffByActionTimers(9), offThenOnByActionTimers(10)  

slaveOutletAction10 1.3.6.1.4.1.2468.1.4.2.1.4.3.3.1.1.11
Set to control the outlet perform action as requested.
OBJECT-TYPE    
  INTEGER none(1), cancelAction(2), onImmediately(3), offImmediately(4), cycleImmediately(5), onByActionTimer(6), offByActionTimer(7), cycleByActionTimer(8), onThenOffByActionTimers(9), offThenOnByActionTimers(10)  

slaveOutletAction11 1.3.6.1.4.1.2468.1.4.2.1.4.3.3.1.1.12
Set to control the outlet perform action as requested.
OBJECT-TYPE    
  INTEGER none(1), cancelAction(2), onImmediately(3), offImmediately(4), cycleImmediately(5), onByActionTimer(6), offByActionTimer(7), cycleByActionTimer(8), onThenOffByActionTimers(9), offThenOnByActionTimers(10)  

slaveOutletAction12 1.3.6.1.4.1.2468.1.4.2.1.4.3.3.1.1.13
Set to control the outlet perform action as requested.
OBJECT-TYPE    
  INTEGER none(1), cancelAction(2), onImmediately(3), offImmediately(4), cycleImmediately(5), onByActionTimer(6), offByActionTimer(7), cycleByActionTimer(8), onThenOffByActionTimers(9), offThenOnByActionTimers(10)  

ipmEnvEmd 1.3.6.1.4.1.2468.1.4.2.1.5.1
OBJECT IDENTIFIER    

ipmEnvEmdStatus 1.3.6.1.4.1.2468.1.4.2.1.5.1.1
OBJECT IDENTIFIER    

ipmEnvEmdStatusEmdType 1.3.6.1.4.1.2468.1.4.2.1.5.1.1.1
EMD Type.
OBJECT-TYPE    
  INTEGER unknown(1), disabled(2), eMD-HT(3), eMD-T(4)  

ipmEnvEmdStatusTemperature 1.3.6.1.4.1.2468.1.4.2.1.5.1.1.2
EMD Temperature in 0.1 degree C.
OBJECT-TYPE    
  INTEGER 1..10000  

ipmEnvEmdStatusHumidity 1.3.6.1.4.1.2468.1.4.2.1.5.1.1.3
EMD Humidity in 0.1%.
OBJECT-TYPE    
  INTEGER 1..10000  

ipmEnvEmdStatusAlarm1 1.3.6.1.4.1.2468.1.4.2.1.5.1.1.4
EMD Alarm-1 state.
OBJECT-TYPE    
  INTEGER unknown(1), disabled(2), alarm(3), normal(4)  

ipmEnvEmdStatusAlarm2 1.3.6.1.4.1.2468.1.4.2.1.5.1.1.5
EMD Alarm-2 state.
OBJECT-TYPE    
  INTEGER unknown(1), disabled(2), alarm(3), normal(4)  

ipmEnvEmdConfig 1.3.6.1.4.1.2468.1.4.2.1.5.1.2
OBJECT IDENTIFIER    

ipmEnvEmdConfigEmdPresence 1.3.6.1.4.1.2468.1.4.2.1.5.1.2.1
Configure the EMD presence by auto-detect or not exist (disabled).
OBJECT-TYPE    
  INTEGER disabled(1), autoDetect(2)  

ipmEnvEmdConfigEmdName 1.3.6.1.4.1.2468.1.4.2.1.5.1.2.2
The name of Emd.
OBJECT-TYPE    
  DisplayString Size(0..31)  

ipmEnvEmdConfigTemp 1.3.6.1.4.1.2468.1.4.2.1.5.1.2.3
OBJECT IDENTIFIER    

ipmEnvEmdConfigTempName 1.3.6.1.4.1.2468.1.4.2.1.5.1.2.3.1
The name of EMD Temperature sensor.
OBJECT-TYPE    
  DisplayString Size(0..31)  

ipmEnvEmdConfigTempHighSetPoint 1.3.6.1.4.1.2468.1.4.2.1.5.1.2.3.2
EMD Temperature set point high, alarm will active when temperature over this value, in degree C.
OBJECT-TYPE    
  INTEGER 5..65  

ipmEnvEmdConfigTempHighStatus 1.3.6.1.4.1.2468.1.4.2.1.5.1.2.3.3
Enabled/disabled the high setpoint be applied or not
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipmEnvEmdConfigTempLowSetPoint 1.3.6.1.4.1.2468.1.4.2.1.5.1.2.3.4
EMD Temperature set point high, alarm will active when temperature under this value, in degree C.
OBJECT-TYPE    
  INTEGER 5..65  

ipmEnvEmdConfigTempLowStatus 1.3.6.1.4.1.2468.1.4.2.1.5.1.2.3.5
Enabled/disabled the low setpoint be applied or not
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipmEnvEmdConfigTempOffset 1.3.6.1.4.1.2468.1.4.2.1.5.1.2.3.6
Offset of temperature in degree C to adjust EMD temperature measurement.
OBJECT-TYPE    
  INTEGER t0p0(1), t0p5(2), t1p0(3), t1p5(4), t2p0(5), t2p5(6), t3p0(7), t-0p5(8), t-1p0(9), t-1p5(10), t-2p0(11), t-2p5(12), t-3p0(13)  

ipmEnvEmdConfigHumi 1.3.6.1.4.1.2468.1.4.2.1.5.1.2.4
OBJECT IDENTIFIER    

ipmEnvEmdConfigHumiName 1.3.6.1.4.1.2468.1.4.2.1.5.1.2.4.1
The name of EMD Humidity.
OBJECT-TYPE    
  DisplayString Size(0..31)  

ipmEnvEmdConfigHumiHighSetPoint 1.3.6.1.4.1.2468.1.4.2.1.5.1.2.4.2
EMD humidity set point high, alarm will active when humidity over this value, in %.
OBJECT-TYPE    
  INTEGER 5..95  

ipmEnvEmdConfigHumiHighStatus 1.3.6.1.4.1.2468.1.4.2.1.5.1.2.4.3
Enabled/disabled the high setpoint be applied or not
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipmEnvEmdConfigHumiLowSetPoint 1.3.6.1.4.1.2468.1.4.2.1.5.1.2.4.4
EMD humidity set point low, alarm will active when humidity under this value, in %.
OBJECT-TYPE    
  INTEGER 5..95  

ipmEnvEmdConfigHumiLowStatus 1.3.6.1.4.1.2468.1.4.2.1.5.1.2.4.5
Enabled/disabled the high setpoint be applied or not
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipmEnvEmdConfigHumiOffset 1.3.6.1.4.1.2468.1.4.2.1.5.1.2.4.6
Emd Hum Offset;
OBJECT-TYPE    
  INTEGER h0p0(1), h1p0(2), h2p0(3), h3p0(4), h4p0(5), h5p0(6), h6p0(7), h-1p0(8), h-2p0(9), h-3p0(10), h-4p0(11), h-5p0(12), h-6p0(13)  

ipmEnvEmdConfigAlarm1 1.3.6.1.4.1.2468.1.4.2.1.5.1.2.5
OBJECT IDENTIFIER    

ipmEnvEmdConfigAlarm1Name 1.3.6.1.4.1.2468.1.4.2.1.5.1.2.5.1
The name of EMD Alarm-1.
OBJECT-TYPE    
  DisplayString Size(0..31)  

ipmEnvEmdConfigAlarm1Type 1.3.6.1.4.1.2468.1.4.2.1.5.1.2.5.2
EMD Alarm-1 type
OBJECT-TYPE    
  INTEGER disabled(1), normalOpen(2), normalClose(3)  

ipmEnvEmdConfigAlarm2 1.3.6.1.4.1.2468.1.4.2.1.5.1.2.6
OBJECT IDENTIFIER    

ipmEnvEmdConfigAlarm2Name 1.3.6.1.4.1.2468.1.4.2.1.5.1.2.6.1
The name of EMD Alarm-2.
OBJECT-TYPE    
  DisplayString Size(0..31)  

ipmEnvEmdConfigAlarm2Type 1.3.6.1.4.1.2468.1.4.2.1.5.1.2.6.2
EMD Alarm-2 type
OBJECT-TYPE    
  INTEGER disabled(1), normalOpen(2), normalClose(3)