IMCO-LS110-MIB

File: IMCO-LS110-MIB.mib (9524 bytes)

Imported modules

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	Counter32
Integer32	Gauge32	TimeTicks
IpAddress	enterprises	TRAP-TYPE

Defined Values

mib-AN-Dcz-SDS		1.3.6.1.4.1.33283
The MIB module to describe PSMSmicro version of SDS.
MODULE-IDENTITY

sdsxpublic		1.3.6.1.4.1.33283.1
OBJECT IDENTIFIER

sdsBIGandSTSW		1.3.6.1.4.1.33283.1.30
OBJECT IDENTIFIER

sdsOptoInput		1.3.6.1.4.1.33283.1.30.2
OBJECT IDENTIFIER

opto1		1.3.6.1.4.1.33283.1.30.2.1
Current OPTO1 binary input status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	activeSignalPresent(0), noSignal(32768)

opto2		1.3.6.1.4.1.33283.1.30.2.2
Current OPTO2 binary input status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	activeSignalPresent(0), noSignal(1)

opto3		1.3.6.1.4.1.33283.1.30.2.3
Current Mains (OPTO3) binary input status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	activeSignalPresent(0), noSignal(2)

sdsOutputRelays		1.3.6.1.4.1.33283.1.30.3
OBJECT IDENTIFIER

sdsOutputRelay1		1.3.6.1.4.1.33283.1.30.3.1
OBJECT IDENTIFIER

sdsRE1state		1.3.6.1.4.1.33283.1.30.3.1.1
Current RELAY 1 output status.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	off(0), activated(255)

sdsOutputRelay2		1.3.6.1.4.1.33283.1.30.3.2
OBJECT IDENTIFIER

sdsRE2state		1.3.6.1.4.1.33283.1.30.3.2.1
Current RELAY 2 output status.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	off(0), activated(255)

sdsOutputRelay3		1.3.6.1.4.1.33283.1.30.3.3
OBJECT IDENTIFIER

sdsRE3state		1.3.6.1.4.1.33283.1.30.3.3.1
Current RELAY 3 output status.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	off(0), activated(255)

sdsADCinputs		1.3.6.1.4.1.33283.1.30.5
OBJECT IDENTIFIER

sdsADCitem0		1.3.6.1.4.1.33283.1.30.5.1
OBJECT IDENTIFIER

sdsTempSensValue		1.3.6.1.4.1.33283.1.30.5.1.3
Temperature Sensor (C) multiplied by 100.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

sdsTempSensName		1.3.6.1.4.1.33283.1.30.5.1.4
User name for the analog temperature sensor.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

sdsADCvalues		1.3.6.1.4.1.33283.1.30.7
OBJECT IDENTIFIER

sdsMaximumLoad		1.3.6.1.4.1.33283.1.30.7.2
Maximum Load (W) multiplied by 10.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sdsAlarmText		1.3.6.1.4.1.33283.1.30.7.3
SDS Alarm Text.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

sdsOutputVoltage1		1.3.6.1.4.1.33283.1.30.7.4
Output voltage U1 (V) multiplied by 100.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sdsOutputVoltage2		1.3.6.1.4.1.33283.1.30.7.5
Output voltage U2 (V) multiplied by 100.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sdsOutputCurrent		1.3.6.1.4.1.33283.1.30.7.6
Output current I (A) multiplied by 10.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sdsBatteryCapacity		1.3.6.1.4.1.33283.1.30.7.7
Battery Capacity (%) multiplied by 10.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sdsLoad		1.3.6.1.4.1.33283.1.30.7.8
Load (%) multiplied by 10.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sdsCapTestTime		1.3.6.1.4.1.33283.1.30.7.9
Time (min) of last Capacity Test.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

sdsGeneralInfoEntry		1.3.6.1.4.1.33283.1.30.8
OBJECT IDENTIFIER

sdsManufacturer		1.3.6.1.4.1.33283.1.30.8.80
Manufacturer of the device.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

sdsModel		1.3.6.1.4.1.33283.1.30.8.81
Model (type) of the device.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

sdsName		1.3.6.1.4.1.33283.1.30.8.82
Name/Location of the device.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

sdsSerialNumber		1.3.6.1.4.1.33283.1.30.8.83
Serial number of the device.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

sdsSoftware		1.3.6.1.4.1.33283.1.30.8.84
Software version of the device.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

opto1-trap		100
TRAP: optical input 1 status.
TRAP-TYPE

opto2-trap		101
TRAP: optical input 2 status.
TRAP-TYPE

opto3-trap		102
TRAP: optical input 3 status.
TRAP-TYPE

sdsRE1state-trap		150
TRAP: Current RELAY 1 output status.
TRAP-TYPE

sdsRE2state-trap		153
TRAP: Current RELAY 2 output status.
TRAP-TYPE

sdsTempSensValue-trap		222
TRAP: Temperature Sensor (C) multiplied by 100.
TRAP-TYPE

sdsTempSensName-trap		223
TRAP: User name for analog temperature sensor.
TRAP-TYPE

sdsMaximumLoad-trap		401
TRAP: SDS Maximum Load-trap.
TRAP-TYPE

sdsAlarmText-trap		402
TRAP: SDS Alarm Text.
TRAP-TYPE

sdsOutputVoltage1-trap		403
TRAP: SDS Output Voltage1-trap.
TRAP-TYPE

sdsOutputVoltage2-trap		404
TRAP: SDS Outpur Voltage2-trap.
TRAP-TYPE

sdsOutputCurrent-trap		405
TRAP: SDS Output current-trap.
TRAP-TYPE

sdsBatteryCapacity-trap		406
TRAP: SDS Battery Capacity-trap.
TRAP-TYPE

sdsLoad-trap		407
TRAP: SDS Load-trap.
TRAP-TYPE

sdsCapTestTime-trap		408
TRAP: SDS CapTestTime-trap.
TRAP-TYPE

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor