ICT-SINE-WAVE-INVERTER-MIB

File: ICT-SINE-WAVE-INVERTER-MIB.mib (4645 bytes)

Imported modules

RFC1155-SMI	RFC1213-MIB	RFC-1212
RFC-1215

Imported symbols

enterprises	IpAddress	DisplayString
OBJECT-TYPE	TRAP-TYPE

Defined Values

ictPower		1.3.6.1.4.1.39145
OBJECT IDENTIFIER

inverter		1.3.6.1.4.1.39145.12
OBJECT IDENTIFIER

deviceModel		1.3.6.1.4.1.39145.12.1
Model Number
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

deviceName		1.3.6.1.4.1.39145.12.2
Site Name
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

deviceHardware		1.3.6.1.4.1.39145.12.3
Hardware Version
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..127

deviceFirmware		1.3.6.1.4.1.39145.12.4
Firmware Version
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

deviceMacAddress		1.3.6.1.4.1.39145.12.5
MAC Address
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

batteryVoltage		1.3.6.1.4.1.39145.12.6
Battery Voltage (VDC)
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

inverterVoltage		1.3.6.1.4.1.39145.12.7
Inverter Output Voltage (VAC)
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

inverterPower		1.3.6.1.4.1.39145.12.8
Inverter Output Power (%)
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

inverterStatus		1.3.6.1.4.1.39145.12.9
Inverter Output Status ('1' indicates the Inverter Output is ENABLED, and '2' indicates the Inverter Output is DISABLED)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

inverterControl		1.3.6.1.4.1.39145.12.10
Inverter Output Control (set to '1' to ENABLE the Inverter Output if no alarms are active, set to '2' to DISABLE the Inverter Output)
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

transferRelayStatus		1.3.6.1.4.1.39145.12.11
Transfer Relay Status ('1' indicates the Output is connected to the INVERTER, and '2' indicates the Output is connected to the GRID)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	inverter(1), grid(2)

undervoltageAlarmTrap		101
Trap generated when the Battery Input Undervoltage Alarm is triggered
TRAP-TYPE

overvoltageAlarmTrap		102
Trap generated when the Battery Input Overvoltage Alarm is triggered
TRAP-TYPE

overtemperatureAlarmTrap		103
Trap generated when the Overtemperature Alarm is triggered
TRAP-TYPE

outputFaultAlarmTrap		104
Trap generated when the Inverter Output Fault Alarm is triggered
TRAP-TYPE

systemFaultAlarmTrap		105
Trap generated when the System Fault Alarm is triggered
TRAP-TYPE

remoteSwitchAlarmTrap		106
Trap generated when the Remote Switch accessory is activated
TRAP-TYPE

undervoltageAlarmClear		111
Trap generated when the Battery Input Undervoltage Alarm is cleared
TRAP-TYPE

overvoltageAlarmClear		112
Trap generated when the Battery Input Overvoltage Alarm is cleared
TRAP-TYPE

overtemperatureAlarmClear		113
Trap generated when the Overtemperature Alarm is cleared
TRAP-TYPE

outputFaultAlarmClear		114
Trap generated when the Inverter Output Fault Alarm is cleared
TRAP-TYPE

systemFaultAlarmClear		115
Trap generated when the System Fault Alarm is cleared
TRAP-TYPE

remoteSwitchAlarmClear		116
Trap generated when the Remote Switch accessory is deactivated
TRAP-TYPE

inverterPowerTrap		121
Trap generated when the Output switches to Inverter (Battery) Power
TRAP-TYPE

gridPowerTrap		122
Trap generated when the Output switches to Grid Power
TRAP-TYPE

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor