HWMUSA-CDI-MIB

File: HWMUSA-CDI-MIB.mib (11903 bytes)

Imported modules

HUAWEI-MIB IF-MIB SNMPv2-SMI

Imported symbols

huaweiUtility ifIndex OBJECT-TYPE
MODULE-IDENTITY NOTIFICATION-TYPE

Defined Types

HwCDIPortEntry  
SEQUENCE    
  hwCDIRecvGain INTEGER
  hwCDITransGain INTEGER
  hwCDIDialMode INTEGER
  hwCDIDelayDial INTEGER
  hwCDIWorkMode INTEGER
  hwCDIRingMode INTEGER
  hwCDIUserName OCTET STRING
  hwCDIOperStatus INTEGER
  hwCDIServiceState INTEGER
  hwCDIAdminStatus INTEGER

Defined Values

hwCDI 1.3.6.1.4.1.2011.6.26
The HUAWEI-CDI-MIB demonstrates how to maintain and config CDI ports
MODULE-IDENTITY    

hwCDIPortObjects 1.3.6.1.4.1.2011.6.26.1
OBJECT IDENTIFIER    

hwCDIPortTable 1.3.6.1.4.1.2011.6.26.1.1
CDI port data table, the table supports port maintain and configure functions, for example port attribute configuration , modification and query, port physical and service state query, port reset operation etc.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwCDIPortEntry

hwCDIPortEntry 1.3.6.1.4.1.2011.6.26.1.1.1
CDI port data table, the table supports port maintain and configure functions, for example port attribute configuration , modification and query, port physical and service state query, port reset operation etc.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwCDIPortEntry  

hwCDIRecvGain 1.3.6.1.4.1.2011.6.26.1.1.1.1
Recieve Gain
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER rg1(1), rg2(2), rg3(3), rg4(4), rg5(5), rg6(6), rg7(7), rg8(8), rg9(9), rg10(10), rg11(11), rg12(12), rg13(13), rg14(14), rg15(15), rg16(16), rg17(17), rg18(18), rg19(19), rg20(20), rg21(21), rg22(22), rg23(23), rg24(24), rg25(25), rg26(26), rg27(27), rg28(28), rg29(29), rg30(30), rg31(31), rg32(32), rg33(33), rg34(34), rg35(35), rg36(36), rg37(37), rg38(38), rg39(39), rg40(40)  

hwCDITransGain 1.3.6.1.4.1.2011.6.26.1.1.1.2
Transmit Gain
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER tg1(1), tg2(2), tg3(3), tg4(4), tg5(5), tg6(6), tg7(7), tg8(8), tg9(9), tg10(10), tg11(11), tg12(12), tg13(13), tg14(14), tg15(15), tg16(16), tg17(17), tg18(18), tg19(19), tg20(20), tg21(21), tg22(22), tg23(23), tg24(24), tg25(25), tg26(26), tg27(27), tg28(28), tg29(29), tg30(30), tg31(31), tg32(32), tg33(33), tg34(34), tg35(35), tg36(36), tg37(37), tg38(38), tg39(39), tg40(40), tg41(41), tg42(42), tg43(43), tg44(44)  

hwCDIDialMode 1.3.6.1.4.1.2011.6.26.1.1.1.3
Dial Mode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER pulse(1), dtmf(2)  

hwCDIDelayDial 1.3.6.1.4.1.2011.6.26.1.1.1.4
Delay Dial Mode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noneDelayDial(1), delayDial(2)  

hwCDIWorkMode 1.3.6.1.4.1.2011.6.26.1.1.1.5
Work Mode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER at0(1), ddi(2)  

hwCDIRingMode 1.3.6.1.4.1.2011.6.26.1.1.1.6
Ring Mode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER r1(1), r2(2), r3(3), r4(4), r5(5), r6(6), r7(7), r8(8), r9(9), r10(10), r11(11), r12(12), r13(13), r14(14), r15(15), r16(16), r17(17), r18(18), r19(19), r20(20), r21(21), r22(22), r23(23), r24(24), r25(25), r26(26), r27(27), r28(28), r29(29), r30(30)  

hwCDIUserName 1.3.6.1.4.1.2011.6.26.1.1.1.7
Port identification
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..10)  

hwCDIOperStatus 1.3.6.1.4.1.2011.6.26.1.1.1.8
Port state
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), fault(2), busy(3)  

hwCDIServiceState 1.3.6.1.4.1.2011.6.26.1.1.1.9
Port service state
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), abnormal(2)  

hwCDIAdminStatus 1.3.6.1.4.1.2011.6.26.1.1.1.10
Port admin status
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER reset(1)  

hwCDIPortTraps 1.3.6.1.4.1.2011.6.26.2
OBJECT IDENTIFIER    

hwCDIPortAlarmVbOids 1.3.6.1.4.1.2011.6.26.2.1
OBJECT IDENTIFIER    

hwCDIPortTrapVbOidsReason 1.3.6.1.4.1.2011.6.26.2.1.1
OBJECT IDENTIFIER    

hwCauseCDIPortNoPower 1.3.6.1.4.1.2011.6.26.2.1.1.1
CDI Port nopower alarms reasons
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER userLineFault(1)  

hwCDIPortAlarmTrap 1.3.6.1.4.1.2011.6.26.2.2
OBJECT IDENTIFIER    

hwCDIPortAlarmTraps 1.3.6.1.4.1.2011.6.26.2.2.0
OBJECT IDENTIFIER    

hwAlarmCDIPortNoPower 1.3.6.1.4.1.2011.6.26.2.2.0.1
CDI Port is no power or userline is fault
Status: current Access: read-only
NOTIFICATION-TYPE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor