HUAWEI-XPON-COMMON-MIB

File: HUAWEI-XPON-COMMON-MIB.mib (227488 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC IF-MIB
SNMPv2-CONF RMON-MIB HUAWEI-MIB

Imported symbols

MODULE-IDENTITY mib-2 OBJECT-TYPE
Counter32 Counter64 Unsigned32
Integer32 zeroDotZero IpAddress
Gauge32 NOTIFICATION-TYPE TruthValue
DateAndTime RowStatus MacAddress
TEXTUAL-CONVENTION ifIndex MODULE-COMPLIANCE
OBJECT-GROUP OwnerString EntryStatus
huaweiMgmt huaweiUtility

Defined Types

HwGponDeviceOntVoipCfgFileInfoEntry  
SEQUENCE    
  hwGponDeviceOntObjIndex Integer32
  hwGponDeviceOntVoipCfgFileState INTEGER
  hwGponDeviceOntVoipCfgFileVersion OCTET STRING
  hwGponDeviceOntVoipCfgResult INTEGER

HwGponDeviceOntPotsPortStateEntry  
SEQUENCE    
  hwGponDeviceOntPotsPortId Integer32
  hwGponDeviceOntPotsPortPTPSrvState INTEGER
  hwGponDeviceOntPotsPortPTPAdminState INTEGER
  hwGponDeviceOntPotsPortPTPHookState INTEGER
  hwGponDeviceOntPotsPortCTPSrvState INTEGER
  hwGponDeviceOntPotsPortCTPSrvType INTEGER
  hwGponDeviceOntPotsPortCTPSrvCode INTEGER

HwXponOntFileTransmitionEntry  
SEQUENCE    
  hwXponOntIndex Integer32
  hwXponOntTransmittingSerialNo Integer32
  hwXponOntTransmittingFileValue OCTET STRING
  hwXponOntTransmittingFileLength Unsigned32

HwXponOntInfoEntry  
SEQUENCE    
  hwXponOntInfoOnlineDuration Gauge32
  hwXponOntInfoMemoryOccupation Integer32
  hwXponOntInfoCpuOccupation Integer32
  hwXponOntInfoTemperature Integer32
  hwXponOntInfoProductDescription OCTET STRING
  hwXponDeviceOntControlPrimaryStatus INTEGER
  hwXponDeviceOntControlSecondaryStatus BITS
  hwXponOntInfoCfgFileCrc Integer32
  hwXponOntInfoAppLoadState Integer32
  hwXponOntInfoXmlLoadState Integer32
  hwXponOntInfoSupportXmlVersion OCTET STRING
  hwXponOntLastDistance Integer32
  hwXponOntInfoNoOnLineReason Integer32

HwXponOntIpMaintainEntry  
SEQUENCE    
  hwXponOntIpMaintainIndex Integer32
  hwXponOntIpRemotePingIpAddress IpAddress

HwXponPortStateEntry  
SEQUENCE    
  hwXponPortSignalDetect INTEGER
  hwXponPortMacChipState INTEGER

HwXponOntBatchInfoEntry  
SEQUENCE    
  hwXponOntBatchQueryIndex Unsigned32
  hwXponOntBatchQueryItemMask Unsigned32
  hwXponOntBatchQueryList OCTET STRING
  hwXponOntBatchQueryInfo OCTET STRING

HwXponOntPppoeSimuTestInfoEntry  
SEQUENCE    
  hwXponOntPppoeSimuEthPortID Integer32
  hwXponOntPppoeSimuOuterCVlanID Integer32
  hwXponOntPppoeOuterSimuCVlanPri Integer32
  hwXponOntPppoeSimuPppoeUsername OCTET STRING
  hwXponOntPppoeSimuPppoePassword OCTET STRING
  hwXponOntPppoeSimuPppoeAuthProtocol INTEGER
  hwXponOntPppoeSimuSwitch INTEGER

HwXponOntControlEntry  
SEQUENCE    
  hwXponOntConfigFactoryConfiguration INTEGER
  hwXponOntControlGracefulReset INTEGER
  hwXponOntControlGraceTime Integer32
  hwXponOntDeleteVasService INTEGER

HwGponOntPortMulticastVlanTranslationEntry  
SEQUENCE    
  hwGponOntifEthType INTEGER
  hwGponOntifEthPort Integer32
  hwGponOntPortMulticastVlanIndex Integer32
  hwGponOntPortMulticastVlanCfgTranslatedVlan Integer32
  hwGponOntPortMulticastStripSwitch INTEGER
  hwGponOntPortMulticastVlanCfgRowStatus RowStatus

HwXponDeviceOntFtpCfgServerEntry  
SEQUENCE    
  hwXponDeviceOntFtpCfgServerName OCTET STRING
  hwXponDeviceOntFtpCfgServerAddress OCTET STRING
  hwXponDeviceOntFtpCfgServerPort Integer32
  hwXponDeviceOntFtpCfgServerUserName OCTET STRING
  hwXponDeviceOntFtpCfgServerPassword OCTET STRING
  hwXponDeviceOntFtpCfgServerRowStatus RowStatus

HwXponDeviceOntFtpCfgEntry  
SEQUENCE    
  hwXponDeviceOntFtpCfgUsedServer OCTET STRING
  hwXponDeviceOntFtpCfgFileName OCTET STRING
  hwXponDeivceOntFtpCfgTrigger Integer32

HwXponOntConfigEntry  
SEQUENCE    
  hwXponOntUsedAlarmPolicyName OCTET STRING
  hwXponOntPowerSheddingProfName OCTET STRING
  hwXponOntUsedTr069ServerProfName OCTET STRING

HwXponOntWanInfoEntry  
SEQUENCE    
  hwXponOntWanInfoDetail OCTET STRING

HwXponPortControlEntry  
SEQUENCE    
  hwXponPortControlDbaAssignMode INTEGER

HwXponDeviceOntActiveAlarmEntry  
SEQUENCE    
  hwXponDeviceOntActiveAlarmNum Integer32
  hwXponDeviceOntActiveAlarmList OCTET STRING
  hwXponDeviceOntPortActiveAlarmNum Integer32
  hwXponDeviceOntPortActiveAlarmList OCTET STRING

HwXponOntIpConfigEntry  
SEQUENCE    
  hwXponOntIpIndex Integer32
  hwXponOntIpConfigMode INTEGER
  hwXponOntIpConfigVlan Integer32
  hwXponOntIpConfigPriority Integer32
  hwXponOntIpconfigDscpDefaultPriority Integer32
  hwXponOntIpconfigDscpProfIndex Integer32
  hwXponOntIpAddress IpAddress
  hwXponOntNetMask IpAddress
  hwXponOntNetGateway IpAddress
  hwXponOntMasterDNS IpAddress
  hwXponOntSlaveDNS IpAddress
  hwXponOntIpConfigPppoeAccountMode INTEGER
  hwXponOntIpConfigPppoeUserName OCTET STRING
  hwXponOntIpConfigPppoePassword OCTET STRING
  hwXponOntIpconfigDhcpReset INTEGER
  hwXponOntIpconfigRowStatus RowStatus

HwXponOntCapabilityInfoEntry  
SEQUENCE    
  hwXponOntSupportVoipCfgMethod BITS
  hwXponOntSupportVoipSignalProtocol BITS

HwXponOntPowerSheddingStatusQueryEntry  
SEQUENCE    
  hwXponDeviceOntPowerSheddingStatus Integer32

HwGponDeviceOntCapabilityInfoEntry  
SEQUENCE    
  hwGponDeviceOntCapInfoEquipmentID OCTET STRING
  hwGponDeviceOntCapInfoUplinkPonPortNum Integer32
  hwGponDeviceOntCapInfoPotsPortNum Integer32
  hwGponDeviceOntCapInfoEthPortNum Integer32
  hwGponDeviceOntCapInfoTdmPortNum Integer32
  hwGponDeviceOntCapInfoMocaPortNum Integer32
  hwGponDeviceOntCapInfoCatvAniPortNum Integer32
  hwGponDeviceOntCapInfoCatvUniPortNum Integer32
  hwGponDeviceOntCapInfoGemPortNum Integer32
  hwGponDeviceOntCapInfoIpConfigurationMode INTEGER
  hwGponDeviceOntCapInfoTrafficSchedulerNum Integer32
  hwGponDeviceOntCapInfoTcontNum Integer32
  hwGponDeviceOntCapInfoTypeOfFlowControl INTEGER
  hwGponDeviceOntCapInfoDeviceType INTEGER
  hwGponDeviceOntCapInfoPowerSupplyControl INTEGER
  hwGponDeviceOntCapInfoExtOmciMsgFormat INTEGER
  hwGponDeviceOntCapInfoNumberOfPqInTcont OCTET STRING

HwGponDevicePotsPortStatisticEntry  
SEQUENCE    
  hwGponDeviceOntPhyIndex Integer32
  hwGponDevicePotsStatisticRtpError Gauge32
  hwGponDevicePotsStatisticPacketLoss Gauge32
  hwGponDevicePotsPortMaxJitter Gauge32
  hwGponDevicePotsPortMaxTimeRTCP Gauge32
  hwGponDevicePotsStatisticUnderFlowBuff Gauge32
  hwGponDevicePotsStatisticOverFlowBuff Gauge32
  hwGponDevicePotsStatisticCallSetupFails Gauge32
  hwGponDevicePotsPortCallSetupTimer Gauge32
  hwGponDevicePotsStatisticCallTerminateFails Gauge32
  hwGponDevicePotsStatisticAnalogPortRelease Gauge32
  hwGponDevicePotsPortAnalogPortOffHookTimer Gauge32

HwGponOntPerfCurr15MinDataEntry  
SEQUENCE    
  hwGponOntPerfCurr15MinFecCorrectByte Integer32
  hwGponOntPerfCurr15MinFecCorrectCodeWords Integer32
  hwGponOntPerfCurr15MinFecUncorrectCodeWords Integer32
  hwGponOntPerfCurr15MinFecTotalCodeWords Integer32
  hwGponOntPerfCurr15MinFecSeconds Integer32
  hwGponOntPerfCurr15MinRangingTimeCount Counter64
  hwGponOntPerfCurr15MinTransmittedGemFrames Counter64
  hwGponOntPerfCurr15MinXgemKeyErrorCount Counter64
  hwGponOntPerfCurr15MinXgemHecErrorCount Counter64

HwGponOntPerfHis15MinEntry  
SEQUENCE    
  hwGponOntPerfHis15MinNumber Unsigned32
  hwGponOntPerfHis15MinFecCorrectByte Integer32
  hwGponOntPerfHis15MinFecCorrectCodeWords Integer32
  hwGponOntPerfHis15MinFecUncorrectCodeWords Integer32
  hwGponOntPerfHis15MinFecTotalCodeWords Integer32
  hwGponOntPerfHis15MinFecSeconds Integer32
  hwGponOntPerfHis15MinRangingTimeCount Counter64
  hwGponOntPerfHis15MinTransmittedGemFrames Counter64
  hwGponOntPerfHis15MinXgemKeyErrorCount Counter64
  hwGponOntPerfHis15MinXgemHecErrorCount Counter64

HwGponOntIphostStatsEntry  
SEQUENCE    
  hwGponOntIphostEthernetStatisticRecvOctets Counter64
  hwGponOntIphostEthernetStatisticRecvPkts Counter64
  hwGponOntIphostEthernetStatisticRecvMulticastPkts Counter64
  hwGponOntIphostEthernetStatisticRecvBroadcastPkts Counter64
  hwGponOntIphostEthernetStatisticRecvPkts64Octets Counter64
  hwGponOntIphostEthernetStatisticRecvPkts65to127Octets Counter64
  hwGponOntIphostEthernetStatisticRecvPkts128to255Octets Counter64
  hwGponOntIphostEthernetStatisticRecvPkts256to511Octets Counter64
  hwGponOntIphostEthernetStatisticRecvPkts512to1023Octets Counter64
  hwGponOntIphostEthernetStatisticRecvPkts1024to1518Octets Counter64
  hwGponOntIphostEthernetStatisticRecvPktsOversize Counter64
  hwGponOntIphostEthernetStatisticRecvPktsUndersize Counter64
  hwGponOntIphostEthernetStatisticRecvFCSErrors Counter64
  hwGponOntIphostEthernetStatisticRecvDropEvents Counter64
  hwGponOntIphostEthernetStatisticSendOctets Counter64
  hwGponOntIphostEthernetStatisticSendPkts Counter64
  hwGponOntIphostEthernetStatisticMulticastSendPkts Counter64
  hwGponOntIphostEthernetStatisticSendBroadcastPkts Counter64
  hwGponOntIphostEthernetStatisticSendPkts64Octets Counter64
  hwGponOntIphostEthernetStatisticSendPkts65to127Octets Counter64
  hwGponOntIphostEthernetStatisticSendPkts128to255Octets Counter64
  hwGponOntIphostEthernetStatisticSendPkts256to511Octets Counter64
  hwGponOntIphostEthernetStatisticSendPkts512to1023Octets Counter64
  hwGponOntIphostEthernetStatisticSendPkts1024to1518Octets Counter64
  hwGponOntIphostEthernetStatisticSendPktsOversize Counter64
  hwGponOntIphostEthernetStatisticForwardDropEvents Counter64
  hwGponOntIphostEthernetStatisticClear INTEGER

HwGponOntPerfEverbeforeDataEntry  
SEQUENCE    
  hwGponOntEverbeforeDownFrameFecCorrectedBytes Counter64
  hwGponOntEverbeforeDownFrameFecCorrectedCodeWords Counter64
  hwGponOntEverbeforeDownFrameFecUncorrectableCodeWords Counter64
  hwGponOntEverbeforeDownFrameTotalRecCodeWords Counter64
  hwGponOntEverbeforeDownFrameFecSeconds Counter64
  hwGponOntEverbeforeRangingTimeCount Counter64
  hwGponOntEverbeforeTransmittedGemFrames Counter64
  hwGponOntEverbeforeXgemKeyErrorCount Counter64
  hwGponOntEverbeforeXgemHecErrorCount Counter64

Hw10GponOltOpticsModuleInformationEntry  
SEQUENCE    
  hw10GponOltOpticsModuleInfoIdentifier INTEGER
  hw10GponOltOpticsModuleInfoExtCLEICode INTEGER
  hw10GponOltOpticsModuleInfoExtTXRefClock INTEGER
  hw10GponOltOpticsModuleInfoExtCDRFunc INTEGER
  hw10GponOltOpticsModuleInfoExtPowerLevel INTEGER
  hw10GponOltOpticsModuleInfoConnector INTEGER
  hw10GponOltOpticsModuleInfoEncodingRZ INTEGER
  hw10GponOltOpticsModuleInfoEncodingNRZ INTEGER
  hw10GponOltOpticsModuleInfoEncoding8B10B INTEGER
  hw10GponOltOpticsModuleInfoEncoding64B INTEGER
  hw10GponOltOpticsModuleInfoBrMin Integer32
  hw10GponOltOpticsModuleInfoBrMax Integer32
  hw10GponOltOpticsModuleInfoSupportLenSMF Integer32
  hw10GponOltOpticsModuleInfoSupportLenE50um Integer32
  hw10GponOltOpticsModuleInfoSupportLen50um Integer32
  hw10GponOltOpticsModuleInfoSupportLen62p5um Integer32
  hw10GponOltOpticsModuleInfoSupportLenCopper Integer32
  hw10GponOltOpticsModuleInfoTransmitterSupport INTEGER
  hw10GponOltOpticsModuleInfoDetector INTEGER
  hw10GponOltOpticsModuleInfoCooledTransmitterDevice INTEGER
  hw10GponOltOpticsModuleInfoWavelengthControl INTEGER
  hw10GponOltOpticsModuleInfoTransmitterTechnologySupport INTEGER
  hw10GponOltOpticsModuleInfoVendorName OCTET STRING
  hw10GponOltOpticsModuleInfoSupportXFIMode INTEGER
  hw10GponOltOpticsModuleInfoSupportLinesideMode INTEGER
  hw10GponOltOpticsModuleInfoMaxBitRateSupportedByCDR INTEGER
  hw10GponOltOpticsModuleInfoVendorOUI Integer32
  hw10GponOltOpticsModuleInfoVendorPN OCTET STRING
  hw10GponOltOpticsModuleInfoVendorRev OCTET STRING
  hw10GponOltOpticsModuleInfoF51 Integer32
  hw10GponOltOpticsModuleInfoWaveTolerance Integer32
  hw10GponOltOpticsModuleInfoMaxCaseTemperature Integer32
  hw10GponOltOpticsModuleInfoCcbase Integer32
  hw10GponOltOpticsModuleInfoMaxDissipation Integer32
  hw10GponOltOpticsModuleInfoMaxDissipationPowerDownMode Integer32
  hw10GponOltOpticsModuleInfoMaximum5P0VSupply Integer32
  hw10GponOltOpticsModuleInfoMaximum3P3VSupply Integer32
  hw10GponOltOpticsModuleInfoMaximum1P8VSupply Integer32
  hw10GponOltOpticsModuleInfoMaximum5P2VSupply Integer32
  hw10GponOltOpticsModuleInfoVendorSN OCTET STRING
  hw10GponOltOpticsModuleInfoDateCode OCTET STRING
  hw10GponOltOpticsModuleInfoDiagnoMonitorPowerMeasure INTEGER
  hw10GponOltOpticsModuleInfoDiagnoMonitorTypeFECBER INTEGER
  hw10GponOltOpticsModuleInfoEnhancedOptions Integer32
  hw10GponOltOpticsModuleInfoAuxInputOne INTEGER
  hw10GponOltOpticsModuleInfoAuxInputTwo INTEGER
  hw10GponOltOpticsModuleInfoCCEXT Integer32
  hw10GponOltOpticsModuleInfoWavelengthFor2d5G Integer32
  hw10GponOltOpticsModuleInfoWavelengthFor1d25G Integer32
  hw10GponOltOpticsModuleInfoVendorSpecific OCTET STRING
  hw10GponOltOpticsModuleXponType INTEGER
  hw10GponOltOpticsModuleXponSubType INTEGER
  hw10GponOltOpticsModuleXponUsedType INTEGER
  hw10GponOltOpticsModuleXponEncapsulationType INTEGER
  hw10GponOltOpticsModuleXponTemperatureLevel INTEGER
  hw10GponOltOpticsModuleXponOPMprecision INTEGER

HwGponCommonOntStatisticEntry  
SEQUENCE    
  hwXponOntUpstreamPQDiscardedBytesAlarmCount OCTET STRING
  hwXponOntDownstreamPQDiscardedBytesAlarmCount OCTET STRING
  hwXponOntPQDiscardedBytesAlarmCountClear INTEGER

HwXponOntAlarmPolicyEntry  
SEQUENCE    
  hwXponOntAlarmPolicyNameIndex OCTET STRING
  hwXponOntAlarmPolicyBindNum Integer32
  hwXponOntAlarmPolicyFilterAlarmNum Integer32
  hwXponOntAlarmPolicyFilterAlarmList OCTET STRING
  hwXponOntAlarmPolicyUnFilterAlarmNum Integer32
  hwXponOntAlarmPolicyUnFilterAlarmList OCTET STRING
  hwXponOntAlarmPolicyRowStatus RowStatus
  hwXponOntAlarmPolicyAppendPolicyName INTEGER
  hwXponOntAlarmPolicyAppendIpAddress INTEGER
  hwXponOntAlarmPolicyAppendMac INTEGER
  hwXponOntAlarmPolicyAppendSn INTEGER
  hwXponOntAlarmPolicyAppendLoid INTEGER

HwXponDeviceOntPowerSheddingProfileEntry  
SEQUENCE    
  hwXponDeviceOntPowerSheddingProfileNameIndex OCTET STRING
  hwXponDeviceOntPowerSheddingProfileBindNum Integer32
  hwXponDeviceOntPowerSheddingIntervalClassData Integer32
  hwXponDeviceOntPowerSheddingIntervalClassVoice Integer32
  hwXponDeviceOntPowerSheddingIntervalClassVideoOverlay Integer32
  hwXponDeviceOntPowerSheddingIntervalClassVideoReturn Integer32
  hwXponDeviceOntPowerSheddingIntervalClassAtm Integer32
  hwXponDeviceOntPowerSheddingIntervalClassDsl Integer32
  hwXponDeviceOntPowerSheddingIntervalClassCes Integer32
  hwXponDeviceOntPowerSheddingIntervalClassFrame Integer32
  hwXponDeviceOntPowerSheddingIntervalClassSdhSonet Integer32
  hwXponDeviceOntPowerSheddingRestoreInterval Integer32
  hwXponDeviceOntPowerSheddingProfileRowStatus RowStatus

HwXponOntTr069ServerProfileEntry  
SEQUENCE    
  hwXponOntTr069ServerProfileName OCTET STRING
  hwXponOntTr069ServerProfileBindTimes Integer32
  hwXponOntTr069ServerProfileUrl OCTET STRING
  hwXponOntTr069ServerProfileUserName OCTET STRING
  hwXponOntTr069ServerProfilePassword OCTET STRING
  hwXponOntTr069ServerProfileRealm OCTET STRING
  hwXponOntTr069ServerProfileRowStatus RowStatus

HwXponOntAlarmPolicyAlarmEntry  
SEQUENCE    
  hwXponOntAlarmPolicyCfgNameIndex OCTET STRING
  hwXponOntAlarmPolicyAlarmId Integer32
  hwXponOntAlarmPolicyAlarmLevel INTEGER

Defined Values

hwXponCommonMIB 1.3.6.1.4.1.2011.6.145
The MIB is used for defining Huawei's GPON management common MIB objects for both profile-mode and distributing-mode.
MODULE-IDENTITY    

hwXponCommonObjectMIB 1.3.6.1.4.1.2011.6.145.1
OBJECT IDENTIFIER    

hwXponCommonObjects 1.3.6.1.4.1.2011.6.145.1.1
OBJECT IDENTIFIER    

hwXponCommonControlObjects 1.3.6.1.4.1.2011.6.145.1.1.1
OBJECT IDENTIFIER    

hwXponCommonStatisticObjects 1.3.6.1.4.1.2011.6.145.1.1.2
OBJECT IDENTIFIER    

hwGponDeviceCommonGlobalObjects 1.3.6.1.4.1.2011.6.145.1.1.3
OBJECT IDENTIFIER    

hwXponDeviceCommonGlobalObjects 1.3.6.1.4.1.2011.6.145.1.1.4
OBJECT IDENTIFIER    

hwXponDeviceCommonProfileObjects 1.3.6.1.4.1.2011.6.145.1.1.5
OBJECT IDENTIFIER    

hwGponDeviceOntVoipCfgFileInfoTable 1.3.6.1.4.1.2011.6.145.1.1.1.1
The hwGponDeviceOntVoipCfgFileInfoTable is used to query the version information and validation status of the ONT voice configuration file. The indexes of this table are ifIndex and hwGponDeviceOntObjIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwGponDeviceOntVoipCfgFileInfoEntry

hwGponDeviceOntVoipCfgFileInfoEntry 1.3.6.1.4.1.2011.6.145.1.1.1.1.1
The hwGponDeviceOntVoipCfgFileInfoTable is used to query the version information and validation status of the ONT voice configuration file. The indexes of this entry are ifIndex and hwGponDeviceOntObjIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwGponDeviceOntVoipCfgFileInfoEntry  

hwGponDeviceOntObjIndex 1.3.6.1.4.1.2011.6.145.1.1.1.1.1.1
ONT ID, range: 0-127.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwGponDeviceOntVoipCfgFileState 1.3.6.1.4.1.2011.6.145.1.1.1.1.1.2
ONT VOIP configuration file state. Options: 1. inactive(1) - Configuration retrieval has not been attempted 2. active(2) - Configuration was retrieved 3. initializing(3) - Configuration is now being retrieved 4. fault(4) - Configuration retrieval process failed 5. invalid(-1) - Indicates that the query fails or no information is detected
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), active(2), initializing(3), fault(4), invalid(-1)  

hwGponDeviceOntVoipCfgFileVersion 1.3.6.1.4.1.2011.6.145.1.1.1.1.1.3
ONT VOIP file version.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..25)  

hwGponDeviceOntVoipCfgResult 1.3.6.1.4.1.2011.6.145.1.1.1.1.1.4
Query the failed alarm information of config XML file. Options: 1. success(0) - The ONT configuration is successful 2. resolvefail(1) - Failed to resolve the configuration server name 3. notreach(2) - Cannot reach configuration server(The port cannot be reached, ICMP errors) 4. notconnect(3) - Cannot connect to configuration server (due to bad credentials or other fault after the port responded) 5. notvalidate(4) - Cannot validate configuration server 6. notauthenticate(5) - Cannot authenticate configuration session (e.g. missing credentials) 7. responsetimeout(6) - Timeout waiting for response from configuration server 8. responsefail(7) - Failure response received from configuration server 9. configfileerror(8) - Configuration file received has an error 10. invalid(-1) - Other errors
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER success(0), resolvefail(1), notreach(2), notconnect(3), notvalidate(4), notauthenticate(5), responsetimeout(6), responsefail(7), configfileerror(8), invalid(-1)  

hwGponDeviceOntPotsPortStateTable 1.3.6.1.4.1.2011.6.145.1.1.1.2
Query the state of ONT POTS port table.The table is used to query the state of ONT POTS port. The indexes of this table are ifIndex, hwGponDeviceOntObjIndex and hwGponDeviceOntPotsPortId.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwGponDeviceOntPotsPortStateEntry

hwGponDeviceOntPotsPortStateEntry 1.3.6.1.4.1.2011.6.145.1.1.1.2.1
Query the state of ONT POTS port table.The table is used to query the state of ONT POTS port. The indexes of this entry are ifIndex, hwGponDeviceOntObjIndex and hwGponDeviceOntPotsPortId.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwGponDeviceOntPotsPortStateEntry  

hwGponDeviceOntPotsPortId 1.3.6.1.4.1.2011.6.145.1.1.1.2.1.1
ONT POTS port ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwGponDeviceOntPotsPortPTPSrvState 1.3.6.1.4.1.2011.6.145.1.1.1.2.1.2
ONT POTS port physics running state. Options: 1. normal(1) - Normal state 2. fail(2) - Fail state 3. invalidState(-1) - Returned in case of query failure or error
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), fail(2), invalidState(-1)  

hwGponDeviceOntPotsPortPTPAdminState 1.3.6.1.4.1.2011.6.145.1.1.1.2.1.3
ONT POTS port physics admin state. Options: 1. lock(1) - All user functions of this circuit pack are blocked, and alarm for this managed entity are no longer generated 2. unlock(2) - Unlock state, all user functions of this circuit pack are normal 3. invalidState(-1) - This value is return when can't query or have some errors in query
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER lock(1), unlock(2), invalidState(-1)  

hwGponDeviceOntPotsPortPTPHookState 1.3.6.1.4.1.2011.6.145.1.1.1.2.1.4
ONT POTS port physics hook state. Options: 1. onHook(1) - ONT POTS port physics is onHook 2. offHook(2) - ONT POTS port physics is offHook 3. invalidState(-1) - Returned in case of query failure or error
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER onHook(1), offHook(2), invalidState(-1)  

hwGponDeviceOntPotsPortCTPSrvState 1.3.6.1.4.1.2011.6.145.1.1.1.2.1.5
ONT POTS port service running state. Options: 1. noneOrinitial(1) - None or initial state 2. registered(2) - Registered state 3. inSession(3) - In session 4. failedRegistration(4) - Failed in registration 5. failedInvite(5) - Failed in invite 6. portNotconfigured(6) - Port doesn't configure 7. configDone(7) - Config has been done 8. invalidState(-1) - Returned in case of query failure or error
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noneOrinitial(1), registered(2), inSession(3), failedRegistration(4), failedInvite(5), portNotconfigured(6), configDone(7), invalidState(-1)  

hwGponDeviceOntPotsPortCTPSrvType 1.3.6.1.4.1.2011.6.145.1.1.1.2.1.6
ONT POTS port service type. Options: 1. idleOrnone(1) - Idle or none type 2. twoWay(2) - Two way type 3. threeWay(3) - Three way type 4. fax(4) - Fax type 5. telem(5) - Telem type 6. conference(6) - Conference type 7. invalidType(-1) - Invalid type
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER idleOrnone(1), twoWay(2), threeWay(3), fax(4), telem(5), conference(6), invalidType(-1)  

hwGponDeviceOntPotsPortCTPSrvCode 1.3.6.1.4.1.2011.6.145.1.1.1.2.1.7
ONT POTS port code mode. Options: 1. pcmu(1) - Audio data is encoded as eight bits per sample, after logarithmic scaling. PCMU denotes mu-law scaling 2. reserved1(2) - Reserved 3. reserved2(3) - Reserved 4. gsm(4) - GSM denotes the European GSM 06.10 standard for full-rate speech transcoding, ETS 300 961, which is based on RPE/LTP (residual pulse excitation/long term prediction) coding at a rate of 13 kb/ 5. g723(5) - Dual-rate speech coder for multimedia communications transmitting at 5.3 and 6.3 kbit/s 6. dvi4ClockRate8000(6) - DVI4 uses an adaptive delta pulse code modulation (ADPCM) encoding scheme that was specified by the Interactive Multimedia Association (IMA) as the IMA ADPCM wave type, and the clock rate is 8000HZ 7. dvi4ClockRate16000(7) - DVI4 uses an adaptive delta pulse code modulation (ADPCM) encoding scheme that was specified by the Interactive Multimedia Association (IMA) as the IMA ADPCM wave type, and the clock rate is 16000HZ 8. lpc(8) - LPC designates an experimental linear predictive encoding contributed by Ron Frederick, which is based on an implementation written by Ron Zuckerman posted to the Usenet group comp 9. pcma(9) - Audio data is encoded as eight bits per sample, after logarithmic scaling. PCMA denotes A-law scaling 10. g722(10) - 7 kHz audio-coding within 64 kbit/s 11. l16TwoChannels(11) - Two channel encoding 12. l16OneChannel(12) - One channel encoding 13. qcelp(13) - QCELP CODEC compresses each 20 milliseconds of 8,000 Hz 14. cn(14) - Comfort Noise 15. mpa(15) - MPA denotes MPEG-1 or MPEG-2 audio encapsulated as elementary streams 16. g728(16) - Coding of speech at 16 kbit/s using low-delay code excited linear prediction 17. dvi4ClockRate11025(17) - DVI4 uses an adaptive delta pulse code modulation (ADPCM) encoding scheme that was specified by the Interactive Multimedia Association (IMA) as the IMA ADPCM wave type, and the clock rate is 11025HZ. 18. dvi4ClockRate22050(18) - DVI4 uses an adaptive delta pulse code modulation (ADPCM) encoding scheme that was specified by the Interactive Multimedia Association (IMA) as the IMA ADPCM wave type, and the clock rate is 11025HZ. 19. g729(19) - Coding of speech at 8 kbit/s using conjugate structure-algebraic code excited linear prediction 20. t38(20) - T.38 is used by the IFP peer to verify message alignment. It is identified by an ASN.1 Application tag 21. invalidCode(-1) - Invalid code
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER pcmu(1), reserved1(2), reserved2(3), gsm(4), g723(5), dvi4ClockRate8000(6), dvi4ClockRate16000(7), lpc(8), pcma(9), g722(10), l16TwoChannels(11), l16OneChannel(12), qcelp(13), cn(14), mpa(15), g728(16), dvi4ClockRate11025(17), dvi4ClockRate22050(18), g729(19), t38(20), invalidCode(-1)  

hwXponOntFileTransmitionTable 1.3.6.1.4.1.2011.6.145.1.1.1.3
This is ONT file transmission table. This table is used to transmit the config or diagnose files between BMS and ONU. The indexes of this table are ifIndex, hwXponOntIndex and hwXponOntTransmittingSerialNo.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwXponOntFileTransmitionEntry

hwXponOntFileTransmitionEntry 1.3.6.1.4.1.2011.6.145.1.1.1.3.1
This is ONT file transmission table. This table is used to transmit the config or diagnose files between BMS and ONU. The indexes of this entry are ifIndex, hwXponOntIndex and hwXponOntTransmittingSerialNo.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwXponOntFileTransmitionEntry  

hwXponOntIndex 1.3.6.1.4.1.2011.6.145.1.1.1.3.1.1
ONT ID, range: 0-254.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwXponOntTransmittingSerialNo 1.3.6.1.4.1.2011.6.145.1.1.1.3.1.2
The serial number of transmission.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwXponOntTransmittingFileValue 1.3.6.1.4.1.2011.6.145.1.1.1.3.1.3
The file to be transmitted.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..8192)  

hwXponOntTransmittingFileLength 1.3.6.1.4.1.2011.6.145.1.1.1.3.1.4
The length of the file to be transmitted.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hwXponOntInfoTable 1.3.6.1.4.1.2011.6.145.1.1.1.4
The ont info table. This table is used to query the ont information. The indexes of this table are ifIndex and hwXponOntIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwXponOntInfoEntry

hwXponOntInfoEntry 1.3.6.1.4.1.2011.6.145.1.1.1.4.1
The ont info table. This table is used to query the ont information. The indexes of this entry are ifIndex and hwXponOntIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwXponOntInfoEntry  

hwXponOntInfoOnlineDuration 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.1
The one-time online duration of the ONT. Unit: second
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

hwXponOntInfoMemoryOccupation 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.2
The Memory occupation of the ONT, range: 0-100.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwXponOntInfoCpuOccupation 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.3
The CPU occupation of the ONT, range: 0-100.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwXponOntInfoTemperature 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.4
The temperature of the ONT. Unit: degree centigrade
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwXponOntInfoProductDescription 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.5
The product description of the ONT.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

hwXponDeviceOntControlPrimaryStatus 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.6
The primary status of the Board.This parameter indicates the current overall service condition of an entity, i.e., whether it is in-service or out-of-service. Options: 1. is-nr(1) - Normal 2. is-anr(2) - Abnormal 3. is-rst(3) - Restricted 4. is-anrst(4) - Abnormal & Restricted 5. oos-au(5) - Autonomous 6. oos-ma(6) - Management 7. oos-auma(7) - Autonomous & Management 8. oos-aurst(8) - Autonomous & Restricted 9. oos-maanr(9) - Management & Abnormal
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER is-nr(1), is-anr(2), is-rst(3), is-anrst(4), oos-au(5), oos-ma(6), oos-auma(7), oos-aurst(8), oos-maanr(9)  

hwXponDeviceOntControlSecondaryStatus 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.7
This parameter indicates the secondary status of the board. The parameter provides additional information pertaining to PST and PSTQ. For example, it may indicate the type and/or reason of the external command, the event that occurred in the Network Element, etc. Multiple values may apply to an entity at a given moment. The highest bit of SST value indicates the sst-ains(0) status; The second highest bit of SST value indicates the sst-faf(1) status, and the rest can be deduced by analogy. This BITS structure can report the following status: 1. sst-ains(0) - this bit position positively reports that the status of the board is automatic in-service 2. sst-faf(1) - Facility Failure 3. sst-flt(2) - Fault 4. sst-lpbk(3) - Loopback 5. sst-mea(4) - Mismatch of Equipment and Attributes 6. sst-sgeo(5) - Supporting Entity Outage 7. sst-stbyh(6) - Standby-Hot 8. sst-ts(7) - Test 9. sst-uas(8) - Unassigned 10. sst-ueq(9) - Unequipped 11. sst-wrk(10) - Working 12. sst-pwr(11) - Power
Status: current Access: read-only
OBJECT-TYPE    
  BITS sst-ains(0), sst-faf(1), sst-flt(2), sst-lpbk(3), sst-mea(4), sst-sgeo(5), sst-stbyh(6), sst-ts(7), sst-uas(8), sst-ueq(9), sst-wrk(10), sst-pwr(11)  

hwXponOntInfoCfgFileCrc 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.8
The CRC value of the ONT.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwXponOntInfoAppLoadState 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.9
The state of the app load for ONT. 0x01 initstate 0x02 process %0 0x03 ftp load fail 0x04 loaded to mainboard process %10 0x05 loaded to ponboard process %20 0x06 loaded to ponboard fail 0x07 process %80 0x08 fail:user stop 0x09 fail:ont offline 0x0a fail:ont response fail 0x0b fail:ont response timeout 0x0c fail:pon inner error 0x0d process %100,ont restart 0x0e Process %100 the ont now is in survival mode 0x0f fail:system is busy because the ponboard's channel is occupied 0x10 fail:failed to verify the version information 0x11 fail:processing the loading task timed out 0xff fail:unknown reason
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwXponOntInfoXmlLoadState 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.10
The state of the xml load for ONT. 0x01 initstate 0x02 process %0 0x03 ftp load fail 0x04 loaded to mainboard process %10 0x05 loaded to ponboard process %20 0x06 loaded to ponboard fail 0x07 process %80 0x08 process %100 0x09 fail:user stop 0x0a fail:ont not support xml 0x0b fail:ont offline 0x0c fail:ont response unknown fail 0x0d fail:ont response timeout 0x0e fail:xml error ont will reconfigure fail 0x0f fail:xml format error 0x10 fail:xml content error 0x11 fail:ont find xml transfer error 0x12 fail:unknown error from ont 0x13 fail:unknown error from ponboard 0x14 fail:system is busy because the ponboard's channel is occupied 0xff fail:unknown reason
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwXponOntInfoSupportXmlVersion 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.11
The xml version that the ONT supports, it is a V.R.C.SP string.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..25)  

hwXponOntLastDistance 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.12
The last ranging value of the ONT. Unit: m Options: 1. invalid (-1) - Indicates that the query fails or no information is detected.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwXponOntInfoNoOnLineReason 1.3.6.1.4.1.2011.6.145.1.1.1.4.1.13
This object indicates the reason why the ONT went offline. The value (1) indicates that the reason is lacking third party ont license, the value (-1) indicates that the reason is not lacking third party ont license.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwXponOntIpMaintainTable 1.3.6.1.4.1.2011.6.145.1.1.1.5
The ONT IP maintain table. This table is used to config the ONT. The indexes of this table are ifIndex hwXponOntIndex and hwXponOntIpMaintainIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwXponOntIpMaintainEntry

hwXponOntIpMaintainEntry 1.3.6.1.4.1.2011.6.145.1.1.1.5.1
The ONT IP maintain table. This table is used to config the ONT. The indexes of this entry are ifIndex hwXponOntIndex and hwXponOntIpMaintainIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwXponOntIpMaintainEntry  

hwXponOntIpMaintainIndex 1.3.6.1.4.1.2011.6.145.1.1.1.5.1.1
The IP index of the ont IP host.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwXponOntIpRemotePingIpAddress 1.3.6.1.4.1.2011.6.145.1.1.1.5.1.2
The destination IP address of the ONT ping.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwXponPortStateTable 1.3.6.1.4.1.2011.6.145.1.1.1.6
XPON port state table. This table is used to query the port state information. The index of this table is ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwXponPortStateEntry

hwXponPortStateEntry 1.3.6.1.4.1.2011.6.145.1.1.1.6.1
XPON port state table. This table is used to query the port state information. The index of this entry is ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwXponPortStateEntry  

hwXponPortSignalDetect 1.3.6.1.4.1.2011.6.145.1.1.1.6.1.1
Query the signal detect info of the port. Options: 1. normal(1) - Optical signals are detected 2. fault(2) - Optical signals are not detected 3. unsupport(255) - Signal detection is not supported
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), fault(2), unsupport(255)  

hwXponPortMacChipState 1.3.6.1.4.1.2011.6.145.1.1.1.6.1.2
Query the mac chipset state info of the port. Options: 1. normal(1) - The XPON MAC chipset is normal 2. fail(2) - The XPON MAC chipset is fault
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), fail(2)  

hwXponOntBatchInfoTable 1.3.6.1.4.1.2011.6.145.1.1.1.7
This table is used to query the ont run state, config state, admin state, load state, equipment ID, software version, system status, CRC value and offline reason. The length of query result can not exceed 7000 BYTEs. This table can not support the operation of get next. The index of this table is hwXponOntBatchQueryIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwXponOntBatchInfoEntry

hwXponOntBatchInfoEntry 1.3.6.1.4.1.2011.6.145.1.1.1.7.1
This table is used to query the ont run state, config state, admin state, load state, equipment ID, software version, system status, CRC value and offline reason. The length of query result can not exceed 7000 BYTEs. This table can not support the operation of get next. The index of this entry is hwXponOntBatchQueryIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwXponOntBatchInfoEntry  

hwXponOntBatchQueryIndex 1.3.6.1.4.1.2011.6.145.1.1.1.7.1.1
The object indicates the index of the table hwXponOntBatchInfoTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

hwXponOntBatchQueryItemMask 1.3.6.1.4.1.2011.6.145.1.1.1.7.1.2
The items of ont status need query, include ont run state, config state, admin state, app load state, xml load state, equipment ID, software version, system status, CRC value and offline reason.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hwXponOntBatchQueryList 1.3.6.1.4.1.2011.6.145.1.1.1.7.1.3
The object indicates the ONT list, and each ONT takes 4 bytes, include frame(4bit), slot(6bit), port(6bit) and ontid(16bits) and the most number of ONT is 1024.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..4096)  

hwXponOntBatchQueryInfo 1.3.6.1.4.1.2011.6.145.1.1.1.7.1.4
The value of ont status: run state(1byte) : 1-online,2-offline,255-invalid config state(1byte) : 1-init,2-normal,3-fail,4-noresume,5-config,255-invalid admin state(1byte) : 1-activated,2-deactivated,255-invalid app load state(1byte) : 1-init,2-start,3-ftpfail,4-loadtoscu,5-loadtopon,6-loadtoponfail, 7-loadtoont,8-userstop,9-ontoffline,10-ontackfail,11-ontresponsetimeout, 12-errpon,13-ontreset,14-survival,15-channeloccupied, 16-errversion,17-tasktimeout,255-invalid xml load state(1byte) : 1-init,2-start,3-ftpfail,4-loadtoscu,5-loadtopon,6-loadtoponfail,7-loadtoont, 8-crcreport,9-userstop,10-notsupport,11-ontoffline,12-ontackfail, 13-ontresponsetimeout,14-cfgfail,15-errformat,16-errcontent,17-errtransfer, 18-errontinner,19-errponboardinner,20-channeloccupied,255-invalid equipment ID(20bytes) : the equipment ID of the ONT software version(16bytes): the software version of the ONT system status(1byte) : 1-normal,2-survival CRC value(4bytes) : the CRC value report from the ONT offline reason(1byte) : 1-LOS(Loss of signal),2-LOSi(Loss of signal for ONUi), 3-LOFi(Loss of frame of ONUi),4-SFi(Signal fail of ONUi), 5-LOAi(Loss of acknowledge with ONUi),6-LOAMi(Loss of PLOAM for ONUi), 7-deactive ONT fails,8-deactive ONT success,9-reset ONT,10-re-register ONT, 11-pop up fail,12-authentication fail,13-dying-gasp,255-invalid
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwXponOntPppoeSimuTestInfoTable 1.3.6.1.4.1.2011.6.145.1.1.1.8
This table is used for the PPPoE testing. The index of this table is a combination of ifIndex and hwXponOntIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwXponOntPppoeSimuTestInfoEntry

hwXponOntPppoeSimuTestInfoEntry 1.3.6.1.4.1.2011.6.145.1.1.1.8.1
This table is used for the PPPoE testing. The index of this entry is a combination of ifIndex and hwXponOntIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwXponOntPppoeSimuTestInfoEntry  

hwXponOntPppoeSimuEthPortID 1.3.6.1.4.1.2011.6.145.1.1.1.8.1.1
The ONT ETH port.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..8  

hwXponOntPppoeSimuOuterCVlanID 1.3.6.1.4.1.2011.6.145.1.1.1.8.1.2
The object indicts the vlan ID, GPON : 0 - 4095; EPON : 1 - 4094; the value -1 indicts that the query fails.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..4095  

hwXponOntPppoeOuterSimuCVlanPri 1.3.6.1.4.1.2011.6.145.1.1.1.8.1.3
The priority of vlan.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1 | 0..7  

hwXponOntPppoeSimuPppoeUsername 1.3.6.1.4.1.2011.6.145.1.1.1.8.1.4
The user name of PPPoE test.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwXponOntPppoeSimuPppoePassword 1.3.6.1.4.1.2011.6.145.1.1.1.8.1.5
The password of PPPoE test.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwXponOntPppoeSimuPppoeAuthProtocol 1.3.6.1.4.1.2011.6.145.1.1.1.8.1.6
The protocol type of PPPoE test. Options: 1. chap (1) - The protocol type of PPPoE test is chap. 2. pap (2) - The protocol type of PPPoE test is pap. 3. invalid (-1) - Indicates that the query fails.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER chap(1), pap(2), invalid(-1)  

hwXponOntPppoeSimuSwitch 1.3.6.1.4.1.2011.6.145.1.1.1.8.1.7
The object is used to start or stop the PPPoE test. Options: 1. start (1) - Start the PPPoE test. 2. stop (2) - Stop the PPPoE test. 3. invalid (-1) - Indicates that the query fails.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER start(1), stop(2), invalid(-1)  

hwXponOntControlTable 1.3.6.1.4.1.2011.6.145.1.1.1.9
The hwXponOntControlTable is used to config the ONT. The indexes of this table are ifIndex and hwXponOntIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwXponOntControlEntry

hwXponOntControlEntry 1.3.6.1.4.1.2011.6.145.1.1.1.9.1
The hwXponOntControlTable is used to config the ONT. The indexes of this entry are ifIndex and hwXponOntIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwXponOntControlEntry  

hwXponOntConfigFactoryConfiguration 1.3.6.1.4.1.2011.6.145.1.1.1.9.1.1
This parameter is used to restore the ONT to factory configuration. Options: 1. restore (1) - Restore 2. invalid (-1) - Indicates that the query fails or no information is detected
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER restore(1), invalid(-1)  

hwXponOntControlGracefulReset 1.3.6.1.4.1.2011.6.145.1.1.1.9.1.2
This parameter is used to reset the ONT gracefully. Options: 1. gracefullyreset (1) - Indicates that the ONT resets gracefully 2. invalid (-1) - Indicates the invalid value
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER gracefullyreset(1), invalid(-1)  

hwXponOntControlGraceTime 1.3.6.1.4.1.2011.6.145.1.1.1.9.1.3
This parameter is used to specify the maximum time to wait for the ONT to reset gracefully. The default maximum time for wait is 14400 seconds. The invalid value is -1.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1 | 1..65535  

hwXponOntDeleteVasService 1.3.6.1.4.1.2011.6.145.1.1.1.9.1.4
Delete the vas service of the ONT. Options: 1. delete(1) - Delete the vas service of the ONT 2. invalid(-1) - invalid value
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER delete(1), invalid(-1)  

hwGponOntPortMulticastVlanTranslationTable 1.3.6.1.4.1.2011.6.145.1.1.1.10
The hwGponOntPortMulticastVlanTranslationTable is used to config the multicast vlan translation of GPON ONT ETH port. The indexes of this table are ifindex,hwGponDeviceOntObjectIndex,hwGponOntifEthernetType ,hwGponOntifEthernetPort,hwGponOntPortMulticastVlanIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwGponOntPortMulticastVlanTranslationEntry

hwGponOntPortMulticastVlanTranslationEntry 1.3.6.1.4.1.2011.6.145.1.1.1.10.1
The hwGponOntPortMulticastVlanTranslationTable is used to config the multicast vlan translation of GPON ONT ETH port. The indexes of this entry are ifindex,hwGponDeviceOntObjectIndex,hwGponOntifEthernetType ,hwGponOntifEthernetPort,hwGponOntPortMulticastVlanIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwGponOntPortMulticastVlanTranslationEntry  

hwGponOntifEthType 1.3.6.1.4.1.2011.6.145.1.1.1.10.1.1
The ONT ETH port type. Options: 1. eth(47) -The ONT ETH port type is eth
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER eth(47)  

hwGponOntifEthPort 1.3.6.1.4.1.2011.6.145.1.1.1.10.1.2
The ONT ETH port ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwGponOntPortMulticastVlanIndex 1.3.6.1.4.1.2011.6.145.1.1.1.10.1.3
The multicast vlan index of ONT ETH port Ranging from 1 to 4095.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwGponOntPortMulticastVlanCfgTranslatedVlan 1.3.6.1.4.1.2011.6.145.1.1.1.10.1.4
The translation vlan of ONT ETH port, when the GPON ONT ETH port multicast vlan transmit mode is translation.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1 | 1..4095  

hwGponOntPortMulticastStripSwitch 1.3.6.1.4.1.2011.6.145.1.1.1.10.1.5
This object indicates the multicast vlan transmit mode of GPON ONT ETH port. Options: 1. untag(1) - Indicates that the GPON ONT ETH port multicast vlan transmit mode is untag 2. tag(2) - Indicates that the GPON ONT ETH port multicast vlan transmit mode is tag 3. translation(3) - Indicates that the GPON ONT ETH port multicast vlan transmit mode is translation 4. invalid(-1) - Indicates that the query fails or no information is detected
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER untag(1), tag(2), translation(3), invalid(-1)  

hwGponOntPortMulticastVlanCfgRowStatus 1.3.6.1.4.1.2011.6.145.1.1.1.10.1.6
Row status. This object is used to differentiate the creation, modification and deletion operations for an object.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwXponDeviceOntFtpCfgServerTable 1.3.6.1.4.1.2011.6.145.1.1.1.11
The hwXponDeviceOntFtpCfgServerTable is used to config the FTP server, from which ONT get config file. The index of this table is hwXponDeviceOntFtpCfgServerName.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwXponDeviceOntFtpCfgServerEntry

hwXponDeviceOntFtpCfgServerEntry 1.3.6.1.4.1.2011.6.145.1.1.1.11.1
The hwXponDeviceOntFtpCfgServerTable is used to config the FTP server, from which ONT get config file. The index of this entry is hwXponDeviceOntFtpCfgServerName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwXponDeviceOntFtpCfgServerEntry  

hwXponDeviceOntFtpCfgServerName 1.3.6.1.4.1.2011.6.145.1.1.1.11.1.1
The server name of FTP.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(0..15)  

hwXponDeviceOntFtpCfgServerAddress 1.3.6.1.4.1.2011.6.145.1.1.1.11.1.2
The server address of FTP.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..63)  

hwXponDeviceOntFtpCfgServerPort 1.3.6.1.4.1.2011.6.145.1.1.1.11.1.3
The TCP port index Ranging from 0 to 65535.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

hwXponDeviceOntFtpCfgServerUserName 1.3.6.1.4.1.2011.6.145.1.1.1.11.1.4
The server name of user.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..15)  

hwXponDeviceOntFtpCfgServerPassword 1.3.6.1.4.1.2011.6.145.1.1.1.11.1.5
The server password.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..15)  

hwXponDeviceOntFtpCfgServerRowStatus 1.3.6.1.4.1.2011.6.145.1.1.1.11.1.6
Row status. This object is used to differentiate the creation, modification and deletion operations for an object.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwXponDeviceOntFtpCfgTable 1.3.6.1.4.1.2011.6.145.1.1.1.12
The hwXponDeviceOntFtpCfgTable is used to config the FTP Server and config the configuration files name. The indexes of this table are ifindex and hwXponOntIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwXponDeviceOntFtpCfgEntry

hwXponDeviceOntFtpCfgEntry 1.3.6.1.4.1.2011.6.145.1.1.1.12.1
The hwXponDeviceOntFtpCfgTable is used to config the FTP Server and config the configuration files name. The indexes of this entry are ifindex and hwXponOntIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwXponDeviceOntFtpCfgEntry  

hwXponDeviceOntFtpCfgUsedServer 1.3.6.1.4.1.2011.6.145.1.1.1.12.1.1
The server of used.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..15)  

hwXponDeviceOntFtpCfgFileName 1.3.6.1.4.1.2011.6.145.1.1.1.12.1.2
The configuration files name.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..63)  

hwXponDeivceOntFtpCfgTrigger 1.3.6.1.4.1.2011.6.145.1.1.1.12.1.3
This leaf set 1 when config the FTP Server and config the configuration files name.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwXponOntConfigTable 1.3.6.1.4.1.2011.6.145.1.1.1.13
The hwXponOntConfigTable is used to config the ONT. The indexes of this table are ifIndex and hwXponOntIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwXponOntConfigEntry

hwXponOntConfigEntry 1.3.6.1.4.1.2011.6.145.1.1.1.13.1
The hwXponOntConfigTable is used to config the ONT. The indexes of this entry are ifIndex and hwXponOntIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwXponOntConfigEntry  

hwXponOntUsedAlarmPolicyName 1.3.6.1.4.1.2011.6.145.1.1.1.13.1.1
The name of alarm policy profile which used by the ONT.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

hwXponOntPowerSheddingProfName 1.3.6.1.4.1.2011.6.145.1.1.1.13.1.2
The name of the power shedding profile that is bound to the ONT.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

hwXponOntUsedTr069ServerProfName 1.3.6.1.4.1.2011.6.145.1.1.1.13.1.3
This object indicates the name of the tr069 service profile that is bound to the ONT.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

hwXponOntWanInfoTable 1.3.6.1.4.1.2011.6.145.1.1.1.14
The hwXponOntWanInfoTable is used to query the information about WAN ports. The indexes of this table are ifIndex and hwXponOntIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwXponOntWanInfoEntry

hwXponOntWanInfoEntry 1.3.6.1.4.1.2011.6.145.1.1.1.14.1
The hwXponOntWanInfoTable is used to query the information about WAN ports. The indexes of this entry are ifIndex and hwXponOntIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwXponOntWanInfoEntry  

hwXponOntWanInfoDetail 1.3.6.1.4.1.2011.6.145.1.1.1.14.1.1
This object indicates the information about WAN ports.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..800)  

hwXponPortControlTable 1.3.6.1.4.1.2011.6.145.1.1.1.15
The hwXponPortControlTable is used to config the information about ports. The index of this table is ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwXponPortControlEntry

hwXponPortControlEntry 1.3.6.1.4.1.2011.6.145.1.1.1.15.1
The hwXponPortControlTable is used to config the information about ports. The index of this entry is ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwXponPortControlEntry  

hwXponPortControlDbaAssignMode 1.3.6.1.4.1.2011.6.145.1.1.1.15.1.1
This object is used to configure the DBA bandwidth assignment mode. Options: 1. maxbandwidthusage(1) - max bandwidth usage mode 2. minloopdelay(2) - min loop delay mode 3. manual(3) - manual mode, this value is read-only 4. default(4) - default mode, the same with global DBA assignment mode 5. invalid(-1) - Indicates that the query fails or no information is detected
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER maxbandwidthusage(1), minloopdelay(2), manual(3), default(4), invalid(-1)  

hwXponDeviceOntActiveAlarmTable 1.3.6.1.4.1.2011.6.145.1.1.1.16
The hwXponDeviceOntActiveAlarmTable is used to query the active alarm about ONT. The indexes of this table are ifIndex and hwXponOntIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwXponDeviceOntActiveAlarmEntry

hwXponDeviceOntActiveAlarmEntry 1.3.6.1.4.1.2011.6.145.1.1.1.16.1
The hwXponDeviceOntActiveAlarmTable is used to query the active alarm about ONT. The indexes of this entry are ifIndex and hwXponOntIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwXponDeviceOntActiveAlarmEntry  

hwXponDeviceOntActiveAlarmNum 1.3.6.1.4.1.2011.6.145.1.1.1.16.1.1
This object indicates the active alarm number about ONT.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwXponDeviceOntActiveAlarmList 1.3.6.1.4.1.2011.6.145.1.1.1.16.1.2
This object indicates the active alarm list about ONT.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..400)  

hwXponDeviceOntPortActiveAlarmNum 1.3.6.1.4.1.2011.6.145.1.1.1.16.1.3
This object indicates active alarm number about ONT ports.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwXponDeviceOntPortActiveAlarmList 1.3.6.1.4.1.2011.6.145.1.1.1.16.1.4
This object indicates the active alarm list about ONT ports.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..600)  

hwXponOntIpConfigTable 1.3.6.1.4.1.2011.6.145.1.1.1.17
The ONT IP config table. This table is used to configure and query the IP configuration mode and IP address of an ONT. The indexes of this table are ifIndex, hwXponOntIndex and hwXponOntIpIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwXponOntIpConfigEntry

hwXponOntIpConfigEntry 1.3.6.1.4.1.2011.6.145.1.1.1.17.1
The ONT IP config table. This table is used to configure and query the IP configuration mode and IP address of an ONT. The indexes of this entry are ifIndex, hwXponOntIndex and hwXponOntIpIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwXponOntIpConfigEntry  

hwXponOntIpIndex 1.3.6.1.4.1.2011.6.145.1.1.1.17.1.1
The IP index of the ont IP host. range(GPON): 0-1 range(EPON): 0
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwXponOntIpConfigMode 1.3.6.1.4.1.2011.6.145.1.1.1.17.1.2
IP configuration mode. Options: 1. dhcp(1) - Indicates the dynamic allocation mode 2. static(2) - Indicates the static allocation mode 3. nonOLTconfiguration(3) - Indicates the nonOLTconfiguration mode(IP configuration mode is not set in the OLT) 4. pppoe(4) - Indicates the pppoe allocation mode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dhcp(1), static(2), nonOLTconfiguration(3), pppoe(4)  

hwXponOntIpConfigVlan 1.3.6.1.4.1.2011.6.145.1.1.1.17.1.3
The VLAN of ONT IP host. range: 0-4095
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwXponOntIpConfigPriority 1.3.6.1.4.1.2011.6.145.1.1.1.17.1.4
The priority of ONT IP host. range: 0-7, 0xfe: dscp-mapping.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwXponOntIpconfigDscpDefaultPriority 1.3.6.1.4.1.2011.6.145.1.1.1.17.1.5
The default priority for dscp-mapping policy. range: 0-7
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwXponOntIpconfigDscpProfIndex 1.3.6.1.4.1.2011.6.145.1.1.1.17.1.6
The dscp profile index of the ONT ip host, and the range is 1~50
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwXponOntIpAddress 1.3.6.1.4.1.2011.6.145.1.1.1.17.1.7
ONT ip address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwXponOntNetMask 1.3.6.1.4.1.2011.6.145.1.1.1.17.1.8
Subnet mask.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwXponOntNetGateway 1.3.6.1.4.1.2011.6.145.1.1.1.17.1.9
The default network gateway.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwXponOntMasterDNS 1.3.6.1.4.1.2011.6.145.1.1.1.17.1.10
The active DNS address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwXponOntSlaveDNS 1.3.6.1.4.1.2011.6.145.1.1.1.17.1.11
The slave DNS address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwXponOntIpConfigPppoeAccountMode 1.3.6.1.4.1.2011.6.145.1.1.1.17.1.12
The input method of pppoe user account. Options: 1. oltcfg(1) - Indicates the user account is input on the ont 2. ontcfg(2) - Indicates the user account is input on the olt 3. invalid(-1) - Indicates that the query fails
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER oltcfg(1), ontcfg(2), invalid(-1)  

hwXponOntIpConfigPppoeUserName 1.3.6.1.4.1.2011.6.145.1.1.1.17.1.13
The username of the pppoe allocation mode.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwXponOntIpConfigPppoePassword 1.3.6.1.4.1.2011.6.145.1.1.1.17.1.14
The password of the pppoe allocation mode.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwXponOntIpconfigDhcpReset 1.3.6.1.4.1.2011.6.145.1.1.1.17.1.15
This object is used for resetting the ip host in the DHCP mode. Options: 1. reset(1) - DHCP reset in the DHCP mode 2. invalid(-1) - invalid
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER reset(1), invalid(-1)  

hwXponOntIpconfigRowStatus 1.3.6.1.4.1.2011.6.145.1.1.1.17.1.16
The hwXponOntIpconfigRowStatus is used to create a new row or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwXponOntCapabilityInfoTable 1.3.6.1.4.1.2011.6.145.1.1.1.18
The ont info table. This table is used to query capability of the ont. The indexes of this table are ifIndex and hwXponOntIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwXponOntCapabilityInfoEntry

hwXponOntCapabilityInfoEntry 1.3.6.1.4.1.2011.6.145.1.1.1.18.1
The ont info table. This table is used to query capability of the ont. The indexes of this entry are ifIndex and hwXponOntIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwXponOntCapabilityInfoEntry  

hwXponOntSupportVoipCfgMethod 1.3.6.1.4.1.2011.6.145.1.1.1.18.1.1
This parameter indicates the voip configuration mode that the ONT supports. This BITS structure can report the following status: 1. omcioam(0) - This bit position positively reports that the ONT supports omci/oam configuration mode 2. configurationFile(ftp)(1) - This bit position positively reports that the ONT supports configurationFile(ftp) configuration mode 3. tr069(2) - This bit position positively reports that the ONT supports tr069 configuration mode
Status: current Access: read-only
OBJECT-TYPE    
  BITS omcioam(0), configurationFile(1), tr069(2)  

hwXponOntSupportVoipSignalProtocol 1.3.6.1.4.1.2011.6.145.1.1.1.18.1.2
This parameter indicates the voip signal protocol that the ONT supports. This BITS structure can report the following status: 1. sip(0) - This bit position positively reports that the ONT supports SIP Protocol 2. h248(1) - This bit position positively reports that the ONT supports H.248 Protocol 3. mgcp(2) - This bit position positively reports that the ONT supports MGCP Protocol
Status: current Access: read-only
OBJECT-TYPE    
  BITS sip(0), h248(1), mgcp(2)  

hwXponOntPowerSheddingStatusQueryTable 1.3.6.1.4.1.2011.6.145.1.1.1.19
The hwXponOntPowerSheddingStatusQueryTable is used to query the power shedding status of the ONT. The indexes of this table are ifIndex and hwXponOntIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwXponOntPowerSheddingStatusQueryEntry

hwXponOntPowerSheddingStatusQueryEntry 1.3.6.1.4.1.2011.6.145.1.1.1.19.1
The hwXponOntPowerSheddingStatusQueryTable is used to query the power shedding status of the ONT. The indexes of this entry are ifIndex and hwXponOntIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwXponOntPowerSheddingStatusQueryEntry  

hwXponDeviceOntPowerSheddingStatus 1.3.6.1.4.1.2011.6.145.1.1.1.19.1.1
Binary indication of power shedding status for each shedding class. The ONU sets each bit to 1 when power shedding is active, and clears it to 0 when the service is restored. bit0: Data class bit1: Voice class bit2: Video overlay class bit3: Video return class bit4: DSL class bit5: ATM class bit6: CES class bit7: Frame class bit8: Sdh-sonet class bit[15,9]: Reserved and set to 0 others: Unconcern
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwGponDeviceOntCapabilityInfoTable 1.3.6.1.4.1.2011.6.145.1.1.1.20
The ont capability table. This table is used to query capability of the gpon ont. The indexes of this table are ifIndex and hwGponDeviceOntObjIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwGponDeviceOntCapabilityInfoEntry

hwGponDeviceOntCapabilityInfoEntry 1.3.6.1.4.1.2011.6.145.1.1.1.20.1
The ont capability table. This table is used to query capability of the gpon ont. The indexes of this entry are ifIndex and hwGponDeviceOntObjIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwGponDeviceOntCapabilityInfoEntry  

hwGponDeviceOntCapInfoEquipmentID 1.3.6.1.4.1.2011.6.145.1.1.1.20.1.1
The ONT equipment ID.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

hwGponDeviceOntCapInfoUplinkPonPortNum 1.3.6.1.4.1.2011.6.145.1.1.1.20.1.2
This object indicates the number of uplink PON ports. -1 indicates the invalid value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwGponDeviceOntCapInfoPotsPortNum 1.3.6.1.4.1.2011.6.145.1.1.1.20.1.3
This object indicates the number of POTS ports. -1 indicates the invalid value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwGponDeviceOntCapInfoEthPortNum 1.3.6.1.4.1.2011.6.145.1.1.1.20.1.4
This object indicates the number of ETH ports. -1 indicates the invalid value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwGponDeviceOntCapInfoTdmPortNum 1.3.6.1.4.1.2011.6.145.1.1.1.20.1.5
This object indicates the number of TDM ports. -1 indicates the invalid value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwGponDeviceOntCapInfoMocaPortNum 1.3.6.1.4.1.2011.6.145.1.1.1.20.1.6
This object indicates the number of MOCA ports. -1 indicates the invalid value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwGponDeviceOntCapInfoCatvAniPortNum 1.3.6.1.4.1.2011.6.145.1.1.1.20.1.7
This object indicates the number of CATV ANI ports. -1 indicates the invalid value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwGponDeviceOntCapInfoCatvUniPortNum 1.3.6.1.4.1.2011.6.145.1.1.1.20.1.8
This object indicates the number of CATV UNI ports. -1 indicates the invalid value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwGponDeviceOntCapInfoGemPortNum 1.3.6.1.4.1.2011.6.145.1.1.1.20.1.9
This object indicates the number of GEM ports. -1 indicates the invalid value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwGponDeviceOntCapInfoIpConfigurationMode 1.3.6.1.4.1.2011.6.145.1.1.1.20.1.10
The mode of IP configuration. Options: 1. notsupport(1) - Not support 2. support(2) - Support 3. dhcp(3) - DHCP mode 4. static(4) - Static mode 5. invalid(-1) - Indicates the invalid value
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notsupport(1), support(2), dhcp(3), static(4), invalid(-1)  

hwGponDeviceOntCapInfoTrafficSchedulerNum 1.3.6.1.4.1.2011.6.145.1.1.1.20.1.11
This object indicates the number of the traffic scheduler.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwGponDeviceOntCapInfoTcontNum 1.3.6.1.4.1.2011.6.145.1.1.1.20.1.12
This object indicates the number of T-CONTs. -1 indicates the invalid value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwGponDeviceOntCapInfoTypeOfFlowControl 1.3.6.1.4.1.2011.6.145.1.1.1.20.1.13
The type of the ONT flow control. Options: 1. pq(1) - PQ 2. gemportcar(2) - GEMPORT CAR 3. flowcar(3) - FLOW CAR 4. gemportcarandpq(4) - GEMPORT CAR and PQ 5. gemportcarorpq(5) - GEMPORT CAR or PQ 6. invalid(-1) - Indicates the invalid value
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER pq(1), gemportcar(2), flowcar(3), gemportcarandpq(4), gemportcarorpq(5), invalid(-1)  

hwGponDeviceOntCapInfoDeviceType 1.3.6.1.4.1.2011.6.145.1.1.1.20.1.14
This object indicates the ONT type. Options: 1. sfu(1) - The ONT type is SFU 2. hgu(2) - The ONT type is HGU 3. sbu(3) - The ONT type is SBU 4. cbu(4) - The ONT type is CBU 5. mdu(5) - The ONT type is MDU 6. mtu(6) - The ONT type is MTU 7. invalid(-1) - Indicates the invalid value
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER sfu(1), hgu(2), sbu(3), cbu(4), mdu(5), mtu(6), invalid(-1)  

hwGponDeviceOntCapInfoPowerSupplyControl 1.3.6.1.4.1.2011.6.145.1.1.1.20.1.15
This object indicates if the ONT supports the power control. Options: 1. notsupport(1) - The ONT doesn't support the power control 2. support(2) - The ONT supports the power control 3. txrxcoupling(3) - The ONT supports the power control.The TX and RX are coupling 4. txrxindependent(4) - The ONT supports the power control.The TX and RX are independent 5. invalid(-1) - Indicates the invalid value
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notsupport(1), support(2), txrxcoupling(3), txrxindependent(4), invalid(-1)  

hwGponDeviceOntCapInfoExtOmciMsgFormat 1.3.6.1.4.1.2011.6.145.1.1.1.20.1.16
This object indicates if the ONT supports Extended OMCI message format. Options: 1. notsupport(1) - The ONT doesn't support the Extended OMCI message format 2. support(2) - The ONT supports the Extended OMCI message format 3. invalid(-1) - Indicates the invalid value
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notsupport(1), support(2), invalid(-1)  

hwGponDeviceOntCapInfoNumberOfPqInTcont 1.3.6.1.4.1.2011.6.145.1.1.1.20.1.17
This object indicates the number of PQs in T-CONT.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

hwGponDevicePotsPortStatisticTable 1.3.6.1.4.1.2011.6.145.1.1.2.1
VOIP perform monitor statistic table. This table is used to query Pots port statistic. The indexes of this table are ifIndex, hwGponDeviceOntObjIndex and hwGponDeviceOntPhyIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwGponDevicePotsPortStatisticEntry

hwGponDevicePotsPortStatisticEntry 1.3.6.1.4.1.2011.6.145.1.1.2.1.1
VOIP perform monitor statistic table. This table is used to query Pots port statistic. The indexes of this entry are ifIndex, hwGponDeviceOntObjIndex and hwGponDeviceOntPhyIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwGponDevicePotsPortStatisticEntry  

hwGponDeviceOntPhyIndex 1.3.6.1.4.1.2011.6.145.1.1.2.1.1.1
Port index of the ONT.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwGponDevicePotsStatisticRtpError 1.3.6.1.4.1.2011.6.145.1.1.2.1.1.2
The statistic of RTP packet errors.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

hwGponDevicePotsStatisticPacketLoss 1.3.6.1.4.1.2011.6.145.1.1.2.1.1.3
The statistic of the fraction of packets lost.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

hwGponDevicePotsPortMaxJitter 1.3.6.1.4.1.2011.6.145.1.1.2.1.1.4
The maximum jitter identified during the measured interval.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

hwGponDevicePotsPortMaxTimeRTCP 1.3.6.1.4.1.2011.6.145.1.1.2.1.1.5
The maximum time between RTCP packets.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

hwGponDevicePotsStatisticUnderFlowBuff 1.3.6.1.4.1.2011.6.145.1.1.2.1.1.6
The statistic of times the reassembly buffer underflows.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

hwGponDevicePotsStatisticOverFlowBuff 1.3.6.1.4.1.2011.6.145.1.1.2.1.1.7
The statistic of times the reassembly buffer overflows.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

hwGponDevicePotsStatisticCallSetupFails 1.3.6.1.4.1.2011.6.145.1.1.2.1.1.8
The statistic of call setup failures.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

hwGponDevicePotsPortCallSetupTimer 1.3.6.1.4.1.2011.6.145.1.1.2.1.1.9
The longest duration of a single call setup detected during this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

hwGponDevicePotsStatisticCallTerminateFails 1.3.6.1.4.1.2011.6.145.1.1.2.1.1.10
The statistic of calls that were terminated with cause.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

hwGponDevicePotsStatisticAnalogPortRelease 1.3.6.1.4.1.2011.6.145.1.1.2.1.1.11
The statistic of analog port releases without dialling detected.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

hwGponDevicePotsPortAnalogPortOffHookTimer 1.3.6.1.4.1.2011.6.145.1.1.2.1.1.12
The longest period of a single off-hook detected on the analog port.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

hwGponOntPerfCurr15MinDataTable 1.3.6.1.4.1.2011.6.145.1.1.2.2
Ont performance monitor statistic table. This table is used to query ont statistic in the current 15 minutes. The indexes of this table are ifIndex and hwXponOntIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwGponOntPerfCurr15MinDataEntry

hwGponOntPerfCurr15MinDataEntry 1.3.6.1.4.1.2011.6.145.1.1.2.2.1
Ont performance monitor statistic table. This table is used to query ont statistic in the current 15 minutes. The indexes of this entry are ifIndex and hwXponOntIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwGponOntPerfCurr15MinDataEntry  

hwGponOntPerfCurr15MinFecCorrectByte 1.3.6.1.4.1.2011.6.145.1.1.2.2.1.1
Count of bytes that were corrected by the FEC function in the current 15 minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwGponOntPerfCurr15MinFecCorrectCodeWords 1.3.6.1.4.1.2011.6.145.1.1.2.2.1.2
Count of code words that were corrected by the FEC function in the current 15 minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwGponOntPerfCurr15MinFecUncorrectCodeWords 1.3.6.1.4.1.2011.6.145.1.1.2.2.1.3
Count of code words that were not corrected by the FEC function in the current 15 minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwGponOntPerfCurr15MinFecTotalCodeWords 1.3.6.1.4.1.2011.6.145.1.1.2.2.1.4
Count of total received code words in the current 15 minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwGponOntPerfCurr15MinFecSeconds 1.3.6.1.4.1.2011.6.145.1.1.2.2.1.5
Count of seconds in the current 15 minutes, when there was a forward error correction anomaly.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwGponOntPerfCurr15MinRangingTimeCount 1.3.6.1.4.1.2011.6.145.1.1.2.2.1.6
Count of rangingtime in the current 15 minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntPerfCurr15MinTransmittedGemFrames 1.3.6.1.4.1.2011.6.145.1.1.2.2.1.7
Count of transmitted XGEM frames in the current 15 minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntPerfCurr15MinXgemKeyErrorCount 1.3.6.1.4.1.2011.6.145.1.1.2.2.1.8
Count of XGEM key errors in the current 15 minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntPerfCurr15MinXgemHecErrorCount 1.3.6.1.4.1.2011.6.145.1.1.2.2.1.9
Count of XGEM hec error in the current 15 minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntPerfHis15MinTable 1.3.6.1.4.1.2011.6.145.1.1.2.3
Ont performance monitor statistic table. This table is used to query ont statistic. The indexes of this table are ifIndex, hwXponOntIndex and hwGponOntPerfHis15MinNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwGponOntPerfHis15MinEntry

hwGponOntPerfHis15MinEntry 1.3.6.1.4.1.2011.6.145.1.1.2.3.1
Ont performance monitor statistic table. This table is used to query ont statistic. The indexes of this entry are ifIndex,hwXponOntIndex and hwGponOntPerfHis15MinNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwGponOntPerfHis15MinEntry  

hwGponOntPerfHis15MinNumber 1.3.6.1.4.1.2011.6.145.1.1.2.3.1.1
Performance data interval number 1 is the most recent previous 15 minutes interval. Rang:1.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1  

hwGponOntPerfHis15MinFecCorrectByte 1.3.6.1.4.1.2011.6.145.1.1.2.3.1.2
Count of bytes that were corrected by the FEC function in this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwGponOntPerfHis15MinFecCorrectCodeWords 1.3.6.1.4.1.2011.6.145.1.1.2.3.1.3
Count of code words that were corrected by the FEC function in this interval. -1 indicates the invalid value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwGponOntPerfHis15MinFecUncorrectCodeWords 1.3.6.1.4.1.2011.6.145.1.1.2.3.1.4
Count of code words that were not corrected by the FEC function in this interval. -1 indicates the invalid value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwGponOntPerfHis15MinFecTotalCodeWords 1.3.6.1.4.1.2011.6.145.1.1.2.3.1.5
Count of total received code words in this interval. -1 indicates the invalid value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwGponOntPerfHis15MinFecSeconds 1.3.6.1.4.1.2011.6.145.1.1.2.3.1.6
Count of seconds during this interval, when there was a forward error correction anomaly.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwGponOntPerfHis15MinRangingTimeCount 1.3.6.1.4.1.2011.6.145.1.1.2.3.1.7
Count of rangingtime in this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntPerfHis15MinTransmittedGemFrames 1.3.6.1.4.1.2011.6.145.1.1.2.3.1.8
Count of transmitted XGEM frames in this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntPerfHis15MinXgemKeyErrorCount 1.3.6.1.4.1.2011.6.145.1.1.2.3.1.9
Count of XGEM key errors in this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntPerfHis15MinXgemHecErrorCount 1.3.6.1.4.1.2011.6.145.1.1.2.3.1.10
Count of XGEM hec error in this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntIphostStatsTable 1.3.6.1.4.1.2011.6.145.1.1.2.4
The ONT IPHOST port statistics table. The index of this table is a combination of ifIndex, hwGponDeviceOntObjIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwGponOntIphostStatsEntry

hwGponOntIphostStatsEntry 1.3.6.1.4.1.2011.6.145.1.1.2.4.1
The ONT IPHOST port statistics table. The index of this entry is a combination of ifIndex, hwGponDeviceOntObjIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwGponOntIphostStatsEntry  

hwGponOntIphostEthernetStatisticRecvOctets 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.1
This object indicates the received bytes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntIphostEthernetStatisticRecvPkts 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.2
This object indicates the received frames.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntIphostEthernetStatisticRecvMulticastPkts 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.3
This object indicates the received multicast frames.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntIphostEthernetStatisticRecvBroadcastPkts 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.4
This object indicates the received broadcast frames.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntIphostEthernetStatisticRecvPkts64Octets 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.5
This object indicates the received 64-octet frames
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntIphostEthernetStatisticRecvPkts65to127Octets 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.6
This object indicates the received 65~127-octet frames
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntIphostEthernetStatisticRecvPkts128to255Octets 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.7
This object indicates the received 128~255-octet frames
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntIphostEthernetStatisticRecvPkts256to511Octets 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.8
This object indicates the received 256~511-octet frames.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntIphostEthernetStatisticRecvPkts512to1023Octets 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.9
This object indicates the received 512~1023-octet frames.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntIphostEthernetStatisticRecvPkts1024to1518Octets 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.10
This object indicates the received 1024~1518-octet frames.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntIphostEthernetStatisticRecvPktsOversize 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.11
This object indicates the received oversize frames.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntIphostEthernetStatisticRecvPktsUndersize 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.12
This object indicates the received undersize frames.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntIphostEthernetStatisticRecvFCSErrors 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.13
This object indicates the received FCS error frames.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntIphostEthernetStatisticRecvDropEvents 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.14
This object indicates the received drop events.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntIphostEthernetStatisticSendOctets 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.15
This object indicates the sent bytes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntIphostEthernetStatisticSendPkts 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.16
This object indicates the sent frames.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntIphostEthernetStatisticMulticastSendPkts 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.17
This object indicates the sent multicast frames.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntIphostEthernetStatisticSendBroadcastPkts 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.18
This object indicates the sent broadcast frames.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntIphostEthernetStatisticSendPkts64Octets 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.19
This object indicates the sent 64-octet frames
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntIphostEthernetStatisticSendPkts65to127Octets 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.20
This object indicates the sent 65~127-octet frames
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntIphostEthernetStatisticSendPkts128to255Octets 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.21
This object indicates the sent 128~255-octet frames
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntIphostEthernetStatisticSendPkts256to511Octets 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.22
This object indicates the sent 256~511-octet frames.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntIphostEthernetStatisticSendPkts512to1023Octets 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.23
This object indicates the sent 512~1023-octet frames.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntIphostEthernetStatisticSendPkts1024to1518Octets 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.24
This object indicates the sent 1024~1518-octet frames.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntIphostEthernetStatisticSendPktsOversize 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.25
This object indicates the sent oversize frames.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntIphostEthernetStatisticForwardDropEvents 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.26
This object indicates the sent drop events.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntIphostEthernetStatisticClear 1.3.6.1.4.1.2011.6.145.1.1.2.4.1.60
This object is used to clear the statistics. Options: 1. clear(1) - Indicates that clear the statistics 2. invalid(-1) - Indicates that the query fails or no information is detected
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(1), invalid(-1)  

hwGponOntPerfEverbeforeDataTable 1.3.6.1.4.1.2011.6.145.1.1.2.5
Ont performance monitor statistic table. This table is used to query ont ever before statistic. The indexes of this table are a combination of ifIndex and hwXponOntIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwGponOntPerfEverbeforeDataEntry

hwGponOntPerfEverbeforeDataEntry 1.3.6.1.4.1.2011.6.145.1.1.2.5.1
Ont performance monitor statistic table. This table is used to query ont ever before statistic. The indexes of this entry are a combination of ifIndex and hwXponOntIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwGponOntPerfEverbeforeDataEntry  

hwGponOntEverbeforeDownFrameFecCorrectedBytes 1.3.6.1.4.1.2011.6.145.1.1.2.5.1.1
Count of bytes that were corrected by the FEC function ever before
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntEverbeforeDownFrameFecCorrectedCodeWords 1.3.6.1.4.1.2011.6.145.1.1.2.5.1.2
Count of code words that were corrected by the FEC function ever before.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntEverbeforeDownFrameFecUncorrectableCodeWords 1.3.6.1.4.1.2011.6.145.1.1.2.5.1.3
Count of code words that were not corrected by the FEC function ever before.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntEverbeforeDownFrameTotalRecCodeWords 1.3.6.1.4.1.2011.6.145.1.1.2.5.1.4
Count of total received code words ever before.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntEverbeforeDownFrameFecSeconds 1.3.6.1.4.1.2011.6.145.1.1.2.5.1.5
Count of seconds ever before, when there was a forward error correction anomaly.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntEverbeforeRangingTimeCount 1.3.6.1.4.1.2011.6.145.1.1.2.5.1.6
Count of rangingtime ever before.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntEverbeforeTransmittedGemFrames 1.3.6.1.4.1.2011.6.145.1.1.2.5.1.7
Count of transmitted XGEM frames ever before.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntEverbeforeXgemKeyErrorCount 1.3.6.1.4.1.2011.6.145.1.1.2.5.1.8
Count of XGEM key errors ever before.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwGponOntEverbeforeXgemHecErrorCount 1.3.6.1.4.1.2011.6.145.1.1.2.5.1.9
Count of XGEM hec error ever before.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hw10GponOltOpticsModuleInformationTable 1.3.6.1.4.1.2011.6.145.1.1.2.6
This table is used to query the information about the optical transceiver. The index of this table is ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hw10GponOltOpticsModuleInformationEntry

hw10GponOltOpticsModuleInformationEntry 1.3.6.1.4.1.2011.6.145.1.1.2.6.1
This table is used to query the information about the optical transceiver. The index of this entry is ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hw10GponOltOpticsModuleInformationEntry  

hw10GponOltOpticsModuleInfoIdentifier 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.1
This object indicates the type of serial transceiver. Options: 1. unknown(0) - Unknown or unspecified 2. gbic(1) - GBIC 3. solderedToMotherBoard(2) - Module soldered to motherboard 4. sfp(3) - SFP 5. pin300XBI(4) - PIN300XBI 6. xenpak(5) - XENPAK 7. xfp(6) - XFP 8. xff(7) - XFF 9. xfep(8) - XFEP 10. xpak(9) - XPAK 11. x2(10) - X2 12. invalid(-1) - Indicates that the query fails or no information is detected
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), gbic(1), solderedToMotherBoard(2), sfp(3), pin300XBI(4), xenpak(5), xfp(6), xff(7), xfep(8), xpak(9), x2(10), invalid(-1)  

hw10GponOltOpticsModuleInfoExtCLEICode 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.2
This object indicates the extclei code. Options: 1. nonExtCLEICode(0) - No CLEI code present in Table 02h 2. extCLEICode(1) - CLEI code present in Table 02h 3. invalid(-1) - Indicates that the query fails or no information is detected
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER nonExtCLEICode(0), extCLEICode(1), invalid(-1)  

hw10GponOltOpticsModuleInfoExtTXRefClock 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.3
This object indicates the txref clock. Options: 1. nonExtTXRefClock(0) - TX Ref Clock Input Not Required 2. extTXRefClock(1) - TX Ref Clock Input Required 3. invalid(-1) - Indicates that the query fails or no information is detected
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER nonExtTXRefClock(0), extTXRefClock(1), invalid(-1)  

hw10GponOltOpticsModuleInfoExtCDRFunc 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.4
This object indicates the CDR function. Options: 1. nonExtCDRFunc(0) - Non-CDR version of XFP 2. extCDRFunc(1) - Module with CDR function 3. invalid(-1) - Indicates that the query fails or no information is detected
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER nonExtCDRFunc(0), extCDRFunc(1), invalid(-1)  

hw10GponOltOpticsModuleInfoExtPowerLevel 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.5
This object indicates the power level. Options: 1. extPowerLevel1(0) - Power Level 1 Module (1.5 W max. power dissipation.) 2. extPowerLevel2(1) - Power Level 2 Module (2.5W Max) 3. extPowerLevel3(2) - Power Level 3 Module (3.5W max. power dissipation.) 4. extPowerLevel4(3) - Power Level 4 Module (>3.5W max. power dissipation.) 5. invalid(-1) - Indicates that the query fails or no information is detected
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER extPowerLevel1(0), extPowerLevel2(1), extPowerLevel3(2), extPowerLevel4(3), invalid(-1)  

hw10GponOltOpticsModuleInfoConnector 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.6
This object indicates the code for connector type. Options: 1. unknown(1) - Unknown 2. sc(2) - SC 3. style1Connector(3) - Fibre Channel Style 1 copper connector 4. style2Connector(4) - Fibre Channel Style 2 copper connector 5. bnctnc(5) - BNC/TNC 6. channelCoaxial(6) - Fibre Channel coaxial headers 7. fiberJack(7) - FiberJack 8. lc(8) - LC 9. mtrj(9) - MT-RJ 10. mu(10) - MU 11. sg(11) - SG 12. opticalPigtail(12) - Optical pigtail 13. hssdc(13) - HSSDC II 14. copperPigtail(14) - Copper Pigtail 15. invalid(-1) - Indicates that the query fails or no information is detected
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), sc(2), style1Connector(3), style2Connector(4), bnctnc(5), channelCoaxial(6), fiberJack(7), lc(8), mtrj(9), mu(10), sg(11), opticalPigtail(12), hssdc(13), copperPigtail(14), invalid(-1)  

hw10GponOltOpticsModuleInfoEncodingRZ 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.7
This object indicates the EncodingRZ. Options: 1. nonEncodingRZ(0) - Encoding Don't Support RZ 2. encodingRZ(1) - Encoding Support RZ 3. invalid(-1) - Indicates that the query fails or no information is detected
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER nonEncodingRZ(0), encodingRZ(1), invalid(-1)  

hw10GponOltOpticsModuleInfoEncodingNRZ 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.8
This object indicates the EncodingNRZ. Options: 1. nonEncodingNRZ(0) - Encoding Don't Support NRZ 2. encodingNRZ(1) - Encoding Support NRZ 3. invalid(-1) - Indicates that the query fails or no information is detected
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER nonEncodingNRZ(0), encodingNRZ(1), invalid(-1)  

hw10GponOltOpticsModuleInfoEncoding8B10B 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.9
This object indicates the Encoding8B10B. Options: 1. nonEncoding8B10B(0) - Encoding Don't Support 8B10B 2. encoding8B10B(1) - Encoding Support 8B10B 3. invalid(-1) - Indicates that the query fails or no information is detected
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER nonEncoding8B10B(0), encoding8B10B(1), invalid(-1)  

hw10GponOltOpticsModuleInfoEncoding64B 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.10
This object indicates the Encoding64B. Options: 1. nonEncoding64B(0) - Encoding Don't Support 64B/66B 2. encoding64B(1) - Encoding Support 64B/66B 3. invalid(-1) - Indicates that the query fails or no information is detected
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER nonEncoding64B(0), encoding64B(1), invalid(-1)  

hw10GponOltOpticsModuleInfoBrMin 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.11
Minimum bit rate, units of 100 MBits/s
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hw10GponOltOpticsModuleInfoBrMax 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.12
Maximum bit rate, units of 100 MBits/s
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hw10GponOltOpticsModuleInfoSupportLenSMF 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.13
Link length supported for SMF fiber in km
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hw10GponOltOpticsModuleInfoSupportLenE50um 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.14
Link length supported for EBW 50/125 m fiber, units of 2 m
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hw10GponOltOpticsModuleInfoSupportLen50um 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.15
Link length supported for 50/125 m fiber, units of 1 m
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hw10GponOltOpticsModuleInfoSupportLen62p5um 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.16
Link length supported for 62.5/125 m fiber, units of 1 m
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hw10GponOltOpticsModuleInfoSupportLenCopper 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.17
Link length supported for copper, units of 1m
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hw10GponOltOpticsModuleInfoTransmitterSupport 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.18
This object indicates the transmitter support. Options: 1. nonTunable(0) - Transmitter Not Support Tunable 2. tunable(1) - Transmitter Support Tunable 3. invalid(-1) - Indicates that the query fails or no information is detected
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER nonTunable(0), tunable(1), invalid(-1)  

hw10GponOltOpticsModuleInfoDetector 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.19
This object indicates the transmitter support. Options: 1. pin(0) - PIN 2. apd(1) - APD 3. invalid(-1) - Indicates that the query fails or no information is detected
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER pin(0), apd(1), invalid(-1)  

hw10GponOltOpticsModuleInfoCooledTransmitterDevice 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.20
This object indicates the wavelength control. Options: 1. nonSupport(0) - Wavelength control NonSupport 2. support(1) - Wavelength control Support 3. invalid(-1) - Indicates that the query fails or no information is detected
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER nonSupport(0), support(1), invalid(-1)  

hw10GponOltOpticsModuleInfoWavelengthControl 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.21
This object indicates the cooled transmitter device. Options: 1. nonSupport(0) - Cooled transmitter device NonSupport 2. support(1) - Cooled transmitter device Support 3. invalid(-1) - Indicates that the query fails or no information is detected
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER nonSupport(0), support(1), invalid(-1)  

hw10GponOltOpticsModuleInfoTransmitterTechnologySupport 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.22
This object indicates the transmitter technology support. Options: 1. vCSEL850(0) - vCSEL850 2. vCSEL1310(1) - vCSEL1310 3. vCSEL1550(2) - vCSEL1550 4. fP1310(3) - fP1310 5. dFB1310(4) - dFB1310 6. dFB1550(5) - dFB1550 7. eML1310(6) - eML1310 8. eML1550(7) - eML1550 9. cOPPER(8) - cOPPER 10. invalid(-1) - Indicates that the query fails or no information is detected
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER vCSEL850(0), vCSEL1310(1), vCSEL1550(2), fP1310(3), dFB1310(4), dFB1550(5), eML1310(6), eML1550(7), cOPPER(8), invalid(-1)  

hw10GponOltOpticsModuleInfoVendorName 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.23
This object indicates the SFP vendor name (ASCII).
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..17)  

hw10GponOltOpticsModuleInfoSupportXFIMode 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.24
This object indicates the XFI mode. Options: 1. nonSupportXFIMode(0) - Don't Support XFI Loopback Mode 2. supportXFIMode(1) - XFI Loopback Mode Supported 3. invalid(-1) - Indicates that the query fails or no information is detected
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER nonSupportXFIMode(0), supportXFIMode(1), invalid(-1)  

hw10GponOltOpticsModuleInfoSupportLinesideMode 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.25
This object indicates the XFI mode. Options: 1. nonSupportLinesideMode(0) - Don't Support Lineside Loopback Mode 2. supportLinesideMode(1) - Lineside Loopback Mode Supported 3. invalid(-1) - Indicates that the query fails or no information is detected
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER nonSupportLinesideMode(0), supportLinesideMode(1), invalid(-1)  

hw10GponOltOpticsModuleInfoMaxBitRateSupportedByCDR 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.26
This object indicates the max bit rate by CDR. Options: 1. cdrNosupport(0) - CDR not support 2. maxBitRateSupportedByCDR11p1(1) - CDR support for 11.1 Gb/s 3. maxBitRateSupportedByCDR10p7(3) - CDR support for 10.7 Gb/s 4. maxBitRateSupportedByCDR10p5(7) - CDR support for 10.5 Gb/s 5. maxBitRateSupportedByCDR10p3(15) - CDR support for 10.3 Gb/s 6. maxBitRateSupportedByCDR9p95(31) - CDR support for 9.95 Gb/s 7. invalid(-1) - Indicates that the query fails or no information is detected
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER cdrNosupport(0), maxBitRateSupportedByCDR11p1(1), maxBitRateSupportedByCDR10p7(3), maxBitRateSupportedByCDR10p5(7), maxBitRateSupportedByCDR10p3(15), maxBitRateSupportedByCDR9p95(31), invalid(-1)  

hw10GponOltOpticsModuleInfoVendorOUI 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.27
This object indicates the Vendor OUI.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hw10GponOltOpticsModuleInfoVendorPN 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.28
This object indicates the Vendor PN.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..17)  

hw10GponOltOpticsModuleInfoVendorRev 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.29
This object indicates the Vendor rev.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..17)  

hw10GponOltOpticsModuleInfoF51 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.30
This object indicates the Wavelength.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hw10GponOltOpticsModuleInfoWaveTolerance 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.31
This object indicates the Wavelength.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hw10GponOltOpticsModuleInfoMaxCaseTemperature 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.32
This object indicates the Maximum Case Temperature in Degrees C.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hw10GponOltOpticsModuleInfoCcbase 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.33
This object indicates the Cc-base.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hw10GponOltOpticsModuleInfoMaxDissipation 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.34
This object indicates the Maximum Power Dissipation.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hw10GponOltOpticsModuleInfoMaxDissipationPowerDownMode 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.35
This object indicates the Maximum Total Power Dissipation in Power Down Mode.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hw10GponOltOpticsModuleInfoMaximum5P0VSupply 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.36
This object indicates the Maximum current required by +5V Supply.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hw10GponOltOpticsModuleInfoMaximum3P3VSupply 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.37
This object indicates the Maximum current required by +3.3V Supply.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hw10GponOltOpticsModuleInfoMaximum1P8VSupply 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.38
This object indicates the Maximum current required by +1.8V Supply.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hw10GponOltOpticsModuleInfoMaximum5P2VSupply 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.39
This object indicates the Maximum current required by -5.2V Supply.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hw10GponOltOpticsModuleInfoVendorSN 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.40
This object indicates the Vendor SN.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..17)  

hw10GponOltOpticsModuleInfoDateCode 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.41
This object indicates the Date code.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..9)  

hw10GponOltOpticsModuleInfoDiagnoMonitorPowerMeasure 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.42
This object indicates the Received power measurement type. Options: 1. supportOMA(0) - OMA 2. supportAveragePower(1) - Average Power 3. invalid(-1) - Indicates that the query fails or no information is detected
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER supportOMA(0), supportAveragePower(1), invalid(-1)  

hw10GponOltOpticsModuleInfoDiagnoMonitorTypeFECBER 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.43
This object indicates the Module Respond to FEC BER. Options: 1. nonSupportBER(0) - No BER Support 2. supportBER(1) - BER Support 3. invalid(-1) - Indicates that the query fails or no information is detected
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER nonSupportBER(0), supportBER(1), invalid(-1)  

hw10GponOltOpticsModuleInfoEnhancedOptions 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.44
Indicates which optional enhanced features are implemented. bit Description of Enhanced Options 7 -Module Supports Optional VPS 6 -Optional Soft TX-DISABLE implemented 5 -Optional Soft P-down implemented 4 -Supports VPS LV regulator mode 3 -Supports VPS bypassed regulator Mode 2 -Active FEC control functions implemented 1 -Wavelength tunability implemented 0 -Optional CMU Support Mode invalid(-1) -Indicates that the query fails or no information is detected
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hw10GponOltOpticsModuleInfoAuxInputOne 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.45
This object indicates the optics Aux Input One. Options: 1. auxInputType1(0) - Auxiliary monitoring not implemented 2. auxInputType2(1) - APD Bias Voltage 3. auxInputType3(2) - 1G Tx Bias Current 4. auxInputType4(3) - TEC Current (mA) 5. auxInputType5(4) - Laser Temperature 6. auxInputType6(5) - Laser Wavelength 7. auxInputType7(6) - +5V Supply Voltage 8. auxInputType8(7) - 1G Tx Power 9. auxInputType9(8) - +1.8V Supply Voltage 10. auxInputType10(9) - -5.2V Supply Voltage 11. auxInputType11(10) - +5V Supply Current 12. auxInputType14(13) - +3.3V Supply Current 13. auxInputType15(14) - +1.8V Supply Current 14. auxInputType16(15) - -5.2V Supply Current 15. invalid(-1) - Indicates that the query fails or no information is detected
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER auxInputType1(0), auxInputType2(1), auxInputType3(2), auxInputType4(3), auxInputType5(4), auxInputType6(5), auxInputType7(6), auxInputType8(7), auxInputType9(8), auxInputType10(9), auxInputType11(10), auxInputType14(13), auxInputType15(14), auxInputType16(15), invalid(-1)  

hw10GponOltOpticsModuleInfoAuxInputTwo 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.46
This object indicates the optics Aux Input One. Options: 1. auxInputType1(0) - Auxiliary monitoring not implemented 2. auxInputType2(1) - APD Bias Voltage 3. auxInputType3(2) - 1G Tx Bias Current 4. auxInputType4(3) - TEC Current (mA) 5. auxInputType5(4) - Laser Temperature 6. auxInputType6(5) - Laser Wavelength 7. auxInputType7(6) - +5V Supply Voltage 8. auxInputType8(7) - 1G Tx Power 9. auxInputType9(8) - +1.8V Supply Voltage 10. auxInputType10(9) - -5.2V Supply Voltage 11. auxInputType11(10) - +5V Supply Current 12. auxInputType14(13) - +3.3V Supply Current 13. auxInputType15(14) - +1.8V Supply Current 14. auxInputType16(15) - -5.2V Supply Current 15. invalid(-1) - Indicates that the query fails or no information is detected
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER auxInputType1(0), auxInputType2(1), auxInputType3(2), auxInputType4(3), auxInputType5(4), auxInputType6(5), auxInputType7(6), auxInputType8(7), auxInputType9(8), auxInputType10(9), auxInputType11(10), auxInputType14(13), auxInputType15(14), auxInputType16(15), invalid(-1)  

hw10GponOltOpticsModuleInfoCCEXT 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.47
This object indicates the CC-EXT .
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hw10GponOltOpticsModuleInfoWavelengthFor2d5G 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.48
This object indicates the Wavelength for 2.5G.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hw10GponOltOpticsModuleInfoWavelengthFor1d25G 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.49
This object indicates the Wavelength for 1.25G.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hw10GponOltOpticsModuleInfoVendorSpecific 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.50
This object indicates the Vendor specific.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..33)  

hw10GponOltOpticsModuleXponType 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.51
This object indicates the module type. Options: 1. unknown(1) - Unknown 2. gpon(2) - GPON 3. epon(3) - EPON 4. epon10g(4) - 10G EPON 5. xgpon(5) - XG-PON 6. wdmpon(6) - WDM PON 7. hybridpon(7) - Hybrid PON 8. gponOrEpon(8) - GPON/EPON 9. invalid(-1) - Indicates that the query fails or no information is detected
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), gpon(2), epon(3), epon10g(4), xgpon(5), wdmpon(6), hybridpon(7), gponOrEpon(8), invalid(-1)  

hw10GponOltOpticsModuleXponSubType 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.52
This object indicates the sub module type. Options: 1. unknown(1) - Unknown 2. classbplus(101) - CLASS B+ 3. classcplus(102) - CLASS C+ 4. classb(103) - CLASS B 5. px20(201) - PX20 6. px20plus(202) - PX20+ 7. pr30(301) - PR30 8. pr20(302) - PR20 9. prx30(303) - PRX30 10. prx20(304) - PRX20 11. n2a(405) - N2a 12. n2b(406) - N2b 13. n1(407) - N1 14. invalid(-1) - Indicates that the query fails or no information is detected
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), classbplus(101), classcplus(102), classb(103), px20(201), px20plus(202), pr30(301), pr20(302), prx30(303), prx20(304), n2a(405), n2b(406), n1(407), invalid(-1)  

hw10GponOltOpticsModuleXponUsedType 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.53
This object indicates the application scenario of the optical transceiver. Options: 1. unknown(1) - Unknown 2. olt(2) - OLT 3. ont(3) - ONT 4. onu(4) - ONU 5. invalid(-1) - Indicates that the query fails or no information is detected
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), olt(2), ont(3), onu(4), invalid(-1)  

hw10GponOltOpticsModuleXponEncapsulationType 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.54
This object indicates the encapsulation information about the optical transceiver. Options: 1. unknown(1) - Unknown 2. sff2x5(2) - SFF 2x5 3. sff2x10(3) - SFF 2x10 4. sfp(4) - SFP 5. xfp(5) - XFP 6. lxfp(6) - LXFP 7. bosaonboard(7) - BOSA ON BOARD 8. invalid(-1) - Indicates that the query fails or no information is detected
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), sff2x5(2), sff2x10(3), sfp(4), xfp(5), lxfp(6), bosaonboard(7), invalid(-1)  

hw10GponOltOpticsModuleXponTemperatureLevel 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.55
This object indicates the application scenario of the optical transceiver. Options: 1. unknown(1) - Unknown 2. commercial(2) - commercial 3. industry(3) - industry 4. expandTemperature(4) - expand temperature 5. invalid(-1) - Indicates that the query fails or no information is detected
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), commercial(2), industry(3), expandTemperature(4), invalid(-1)  

hw10GponOltOpticsModuleXponOPMprecision 1.3.6.1.4.1.2011.6.145.1.1.2.6.1.56
This object indicates the OPM precision. Options: 1. unknown(1) - Unknown 2. db3(2) - 3db 3. db1(3) - 1db 4. invalid(-1) - Indicates that the query fails or no information is detected
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), db3(2), db1(3), invalid(-1)  

hwGponCommonOntStatisticTable 1.3.6.1.4.1.2011.6.145.1.1.2.7
This table is used to query the information about the priority queue alarm. The indexes of this table are ifIndex and hwXponOntIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwGponCommonOntStatisticEntry

hwGponCommonOntStatisticEntry 1.3.6.1.4.1.2011.6.145.1.1.2.7.1
This table is used to query the information about the priority queue alarm. The indexes of this entry are ifIndex and hwXponOntIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwGponCommonOntStatisticEntry  

hwXponOntUpstreamPQDiscardedBytesAlarmCount 1.3.6.1.4.1.2011.6.145.1.1.2.7.1.1
This object indicates the number of the upstream priority queue alarm due to buffer overflow. One record uses 6 bytes : T-CONT index(1byte)+PQ number(1byte)+alarm number(4bytes).
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..8192)  

hwXponOntDownstreamPQDiscardedBytesAlarmCount 1.3.6.1.4.1.2011.6.145.1.1.2.7.1.2
This object indicates the number of the downstream priority queue alarm due to buffer overflow. One record uses 8 bytes : port type(1byte)+port index(1byte)+reserve(1byte)+PQ number(1byte)+alarm number(4byte).
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..1280)  

hwXponOntPQDiscardedBytesAlarmCountClear 1.3.6.1.4.1.2011.6.145.1.1.2.7.1.3
This object is used to clear the statistics. Options: 1. clear(1) - Indicates that clear the statistics 2. invalid(-1) - Indicates that the query fails or no information is detected
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(1), invalid(-1)  

hwGponDeviceChangePasswordIntervalTime 1.3.6.1.4.1.2011.6.145.1.1.3.1
The interval time of ONT's password renew, 0 means no update, 65535 means no configration data. Unit: minutes
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32 0 | 5..1440 | 65535  

hwGponDeviceTcontAutoCombineSwitch 1.3.6.1.4.1.2011.6.145.1.1.3.2
The switch value of T-CONT auto-combine. Options: 1. enable(1) - The switch value of T-CONT auto-combine is enable 2. disable(2) - The switch value of T-CONT auto-combine is disable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwGponOntInteroperabilityMode 1.3.6.1.4.1.2011.6.145.1.1.3.3
The switch mode of gpon ont interoperability. Options: 1. itu-t(1) - The switch mode of gpon ont interoperability is itu-t 2. ctc(2) - The switch mode of gpon ont interoperability is ctc
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER itu-t(1), ctc(2)  

hwGponDeviceOntDefaultLineProfName 1.3.6.1.4.1.2011.6.145.1.1.3.4
This object indicates the name of the default line profile that is bound to the ONT.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

hwGponDeviceOntDefaultSrvProfName 1.3.6.1.4.1.2011.6.145.1.1.3.5
This object indicates the name of the default service profile that is bound to the ONT.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

hwGponOntMutlicastAuthMode 1.3.6.1.4.1.2011.6.145.1.1.3.6
The mode of gpon ont multicast authentication. Options: 1. ont-control(1) - The mode of gpon multicast authentication is ont-control 2. olt-control(2) - The mode of gpon multicast authentication is olt-control
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ont-control(1), olt-control(2)  

hwXponDeviceLosAlarmControlState 1.3.6.1.4.1.2011.6.145.1.1.4.1
The object is used to open or close the switch of the advanced los alarm. Options: 1.enable(1) - Open the switch of the advanced los alarm 2.disable(2) - Close the switch of the advanced los alarm The default value is disable(2).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwXponCommonOntCatvDefaultState 1.3.6.1.4.1.2011.6.145.1.1.4.2
This object is used to set the default status of ONT CATV ports. Options: 1. on(1) - The default status of ONT CATV ports is on 2. off(2) - The default status of ONT CATV ports is off 3. invalid(-1) - Indicates that the query fails
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), invalid(-1)  

hwXponDeviceGroupPowerOffControlState 1.3.6.1.4.1.2011.6.145.1.1.4.3
This object is used to open or close the group power off report switch. Options: 1.enable(1) - Open the group power off report switch 2.disable(2) - Close the group power off report switch The default value is disable(2)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwXponDeviceAutofindConflictCheckSwitch 1.3.6.1.4.1.2011.6.145.1.1.4.4
This object is used to open or close the ONT autofind conflict-check switch. Options: 1.enable(1) - Open the switch of the ONT autofind conflict-check 2.disable(2) - Close the switch of the ONT autofind conflict-check The default value is disable(2)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwXponDeviceModifyBoundProfileSwitch 1.3.6.1.4.1.2011.6.145.1.1.4.5
This object is used to enable or disable the bound profile modification switch. Options: 1.enable(1) - Enable to modify bound profile 2.disable(2) - Disable to modify bound profile 3.invalid(-1) - Indicates that the query fails The default value is enable(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), invalid(-1)  

hwXponDeviceAlarmClearOnShutdown 1.3.6.1.4.1.2011.6.145.1.1.4.6
The object is used to set whether clear active alarm on shutdown object. Options: 1.enable(1) - Open the switch, clear active alarm on shutdown object 2.disable(2) - Close the switch, does not clear active alarm on shutdown object The default value is disable(2).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwXponDeviceSuppressInitialAlarmState 1.3.6.1.4.1.2011.6.145.1.1.4.7
The object is used to set whether suppress initial alarm. Options: 1.enable(1) - Open the switch, suppress initial alarm state 2.disable(2) - Close the switch, does not suppress initial alarm state The default value is enable(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwXponOntAlarmPolicyTable 1.3.6.1.4.1.2011.6.145.1.1.5.1
The hwXponOntAlarmPolicyTable is used to config the ONT alarm policy profile. The index of this table is hwXponOntAlarmPolicyNameIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwXponOntAlarmPolicyEntry

hwXponOntAlarmPolicyEntry 1.3.6.1.4.1.2011.6.145.1.1.5.1.1
The hwXponOntAlarmPolicyTable is used to config the ONT alarm policy profile. The index of this entry is hwXponOntAlarmPolicyNameIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwXponOntAlarmPolicyEntry  

hwXponOntAlarmPolicyNameIndex 1.3.6.1.4.1.2011.6.145.1.1.5.1.1.1
This object indicates the ONT alarm policy profile name index.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

hwXponOntAlarmPolicyBindNum 1.3.6.1.4.1.2011.6.145.1.1.5.1.1.2
This object indicates the number of ONT bound with alarm policy profile.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwXponOntAlarmPolicyFilterAlarmNum 1.3.6.1.4.1.2011.6.145.1.1.5.1.1.3
This object indicates the number of filtered alarm of the alarm policy profile.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..100  

hwXponOntAlarmPolicyFilterAlarmList 1.3.6.1.4.1.2011.6.145.1.1.5.1.1.4
This object indicates the filtered alarm list of the alarm policy profile,and each alarm ID takes 4 bytes.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..400)  

hwXponOntAlarmPolicyUnFilterAlarmNum 1.3.6.1.4.1.2011.6.145.1.1.5.1.1.5
This object indicates the number of unfiltered alarm of the alarm policy profile.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..100  

hwXponOntAlarmPolicyUnFilterAlarmList 1.3.6.1.4.1.2011.6.145.1.1.5.1.1.6
This object indicates the unfiltered alarm list of the alarm policy profile,and each alarm ID takes 4 bytes.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..400)  

hwXponOntAlarmPolicyRowStatus 1.3.6.1.4.1.2011.6.145.1.1.5.1.1.7
The hwXponOntAlarmPolicyRowStatus is used to create a new row or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwXponOntAlarmPolicyAppendPolicyName 1.3.6.1.4.1.2011.6.145.1.1.5.1.1.8
This object indicates if the ONT alarm appends ONT alarm policy profile name. Options: 1.enable(1) - The ONT alarm appends ONT alarm policy profile name.. 2.disable(2) - The ONT alarm does not append ONT alarm policy profile name.. The default value is enable(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwXponOntAlarmPolicyAppendIpAddress 1.3.6.1.4.1.2011.6.145.1.1.5.1.1.9
This object indicates if the ONT alarm appends IP address. Options: 1.enable(1) - The ONT alarm appends IP address. 2.disable(2) - The ONT alarm does not append IP address. The default value is disable(2).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwXponOntAlarmPolicyAppendMac 1.3.6.1.4.1.2011.6.145.1.1.5.1.1.10
This object indicates if the ONT alarm appends MAC. Options: 1.enable(1) - The ONT alarm appends MAC. 2.disable(2) - The ONT alarm does not append MAC. The default value is disable(2).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwXponOntAlarmPolicyAppendSn 1.3.6.1.4.1.2011.6.145.1.1.5.1.1.11
This object indicates if the ONT alarm appends SN. Options: 1.enable(1) - The ONT alarm appends SN. 2.disable(2) - The ONT alarm does not append SN. The default value is disable(2).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwXponOntAlarmPolicyAppendLoid 1.3.6.1.4.1.2011.6.145.1.1.5.1.1.12
This object indicates if the ONT alarm appends LOID. Options: 1.enable(1) - The ONT alarm appends LOID. 2.disable(2) - The ONT alarm does not append LOID. The default value is disable(2).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwXponDeviceOntPowerSheddingProfileTable 1.3.6.1.4.1.2011.6.145.1.1.5.2
The hwXponDeviceOntPowerSheddingProfileTable is used to config the ONT power shedding profile. The index of this table is hwXponDeviceOntPowerSheddingProfileNameIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwXponDeviceOntPowerSheddingProfileEntry

hwXponDeviceOntPowerSheddingProfileEntry 1.3.6.1.4.1.2011.6.145.1.1.5.2.1
The hwXponDeviceOntPowerSheddingProfileTable is used to config the ONT power shedding profile. The index of this entry is hwXponDeviceOntPowerSheddingProfileNameIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwXponDeviceOntPowerSheddingProfileEntry  

hwXponDeviceOntPowerSheddingProfileNameIndex 1.3.6.1.4.1.2011.6.145.1.1.5.2.1.1
This object indicates the ONT power shedding profile name index.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

hwXponDeviceOntPowerSheddingProfileBindNum 1.3.6.1.4.1.2011.6.145.1.1.5.2.1.2
This object indicates the number of ONT bound with power shedding profile.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwXponDeviceOntPowerSheddingIntervalClassData 1.3.6.1.4.1.2011.6.145.1.1.5.2.1.3
This object indicates the power shedding interval of data class service. Options: 1: disables power shedding(0) 2: enables immediate power shed(1) 3. 2-65535 - Indicates the time, in seconds, to keep the service active after AC failure before shutting them down and shedding power.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

hwXponDeviceOntPowerSheddingIntervalClassVoice 1.3.6.1.4.1.2011.6.145.1.1.5.2.1.4
This object indicates the power shedding interval of voice class service. Options: 1: disables power shedding(0) 2: enables immediate power shed(1) 3. 2-65535 - Indicates the time, in seconds, to keep the service active after AC failure before shutting them down and shedding power.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

hwXponDeviceOntPowerSheddingIntervalClassVideoOverlay 1.3.6.1.4.1.2011.6.145.1.1.5.2.1.5
This object indicates the power shedding interval of video overlay class service. Options: 1: disables power shedding(0) 2: enables immediate power shed(1) 3. 2-65535 - Indicates the time, in seconds, to keep the service active after AC failure before shutting them down and shedding power.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

hwXponDeviceOntPowerSheddingIntervalClassVideoReturn 1.3.6.1.4.1.2011.6.145.1.1.5.2.1.6
This object indicates the power shedding interval of video return class service. Options: 1: disables power shedding(0) 2: enables immediate power shed(1) 3. 2-65535 - Indicates the time, in seconds, to keep the service active after AC failure before shutting them down and shedding power.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

hwXponDeviceOntPowerSheddingIntervalClassDsl 1.3.6.1.4.1.2011.6.145.1.1.5.2.1.7
This object indicates the power shedding interval of DSL class service. Options: 1: disables power shedding(0) 2: enables immediate power shed(1) 3. 2-65535 - Indicates the time, in seconds, to keep the service active after AC failure before shutting them down and shedding power.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

hwXponDeviceOntPowerSheddingIntervalClassAtm 1.3.6.1.4.1.2011.6.145.1.1.5.2.1.8
This object indicates the power shedding interval of ATM class service. Options: 1: disables power shedding(0) 2: enables immediate power shed(1) 3. 2-65535 - Indicates the time, in seconds, to keep the service active after AC failure before shutting them down and shedding power.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

hwXponDeviceOntPowerSheddingIntervalClassCes 1.3.6.1.4.1.2011.6.145.1.1.5.2.1.9
This object indicates the power shedding interval of CES class service. Options: 1: disables power shedding(0) 2: enables immediate power shed(1) 3. 2-65535 - Indicates the time, in seconds, to keep the service active after AC failure before shutting them down and shedding power.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

hwXponDeviceOntPowerSheddingIntervalClassFrame 1.3.6.1.4.1.2011.6.145.1.1.5.2.1.10
This object indicates the power shedding interval of frame class service. Options: 1: disables power shedding(0) 2: enables immediate power shed(1) 3. 2-65535 - Indicates the time, in seconds, to keep the service active after AC failure before shutting them down and shedding power.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

hwXponDeviceOntPowerSheddingIntervalClassSdhSonet 1.3.6.1.4.1.2011.6.145.1.1.5.2.1.11
This object indicates the power shedding interval of sdh-sonet class service. Options: 1: disables power shedding(0) 2: enables immediate power shed(1) 3. 2-65535 - Indicates the time, in seconds, to keep the service active after AC failure before shutting them down and shedding power.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

hwXponDeviceOntPowerSheddingRestoreInterval 1.3.6.1.4.1.2011.6.145.1.1.5.2.1.12
This object indicates the time delay, in seconds, before resetting the power-shedding timers after full power restoration.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

hwXponDeviceOntPowerSheddingProfileRowStatus 1.3.6.1.4.1.2011.6.145.1.1.5.2.1.13
The hwXponDeviceOntPowerSheddingProfileRowStatus is used to create a new row or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwXponOntTr069ServerProfileTable 1.3.6.1.4.1.2011.6.145.1.1.5.3
This table is used to create, delete or modify the tr069 server profile. The index of this table is hwXponOntTr069ServerProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwXponOntTr069ServerProfileEntry

hwXponOntTr069ServerProfileEntry 1.3.6.1.4.1.2011.6.145.1.1.5.3.1
This table is used to create, delete or modify the tr069 server profile. The index of this entry is hwXponOntTr069ServerProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwXponOntTr069ServerProfileEntry  

hwXponOntTr069ServerProfileName 1.3.6.1.4.1.2011.6.145.1.1.5.3.1.1
This object indicates the tr069-server-profile name.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

hwXponOntTr069ServerProfileBindTimes 1.3.6.1.4.1.2011.6.145.1.1.5.3.1.2
This object indicates the number of ONT bound with tr069-server-profile.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwXponOntTr069ServerProfileUrl 1.3.6.1.4.1.2011.6.145.1.1.5.3.1.3
This object indicates the server URL. For example: you can set the value of the leaf like 'www.huawei.com'.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..63)  

hwXponOntTr069ServerProfileUserName 1.3.6.1.4.1.2011.6.145.1.1.5.3.1.4
This object indicates the user name.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..50)  

hwXponOntTr069ServerProfilePassword 1.3.6.1.4.1.2011.6.145.1.1.5.3.1.5
This object indicates the user password.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..25)  

hwXponOntTr069ServerProfileRealm 1.3.6.1.4.1.2011.6.145.1.1.5.3.1.6
This object indicates the server realm.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..24)  

hwXponOntTr069ServerProfileRowStatus 1.3.6.1.4.1.2011.6.145.1.1.5.3.1.7
TRow status. This object is used to differentiate the creation, modification and deletion operations for an object.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwXponOntAlarmPolicyAlarmTable 1.3.6.1.4.1.2011.6.145.1.1.5.4
This table is used to set the ONT alarm level. The index of this table is hwXponOntAlarmPolicyCfgNameIndex and hwXponOntAlarmPolicyAlarmId.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwXponOntAlarmPolicyAlarmEntry

hwXponOntAlarmPolicyAlarmEntry 1.3.6.1.4.1.2011.6.145.1.1.5.4.1
This table is used to set the ONT alarm level. The index of this entry is hwXponOntAlarmPolicyCfgNameIndex and hwXponOntAlarmPolicyAlarmId.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwXponOntAlarmPolicyAlarmEntry  

hwXponOntAlarmPolicyCfgNameIndex 1.3.6.1.4.1.2011.6.145.1.1.5.4.1.1
This object indicates the ONT alarm policy profile name index.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

hwXponOntAlarmPolicyAlarmId 1.3.6.1.4.1.2011.6.145.1.1.5.4.1.2
This object indicates the ONT alarm ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwXponOntAlarmPolicyAlarmLevel 1.3.6.1.4.1.2011.6.145.1.1.5.4.1.3
This object indicates the ONT alarm level. Options: 1. critical(1) - The ONT alarm level is critical. 2. major(2) - The ONT alarm level is major. 3. minor(3) - The ONT alarm level is minor. 4. warning(4) - The ONT alarm level is warning. 5. unconcern(-1) - The ONT alarm severity is unconcerned in the ONT alarm policy profile. The default value is unconcern(-1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER critical(1), major(2), minor(3), warning(4), unconcern(-1)