HUAWEI-WLAN-UPDATE-MIB

File: HUAWEI-WLAN-UPDATE-MIB.mib (24374 bytes)

Imported modules

HUAWEI-WLAN-DEVICE-MIB HUAWEI-WLAN-MIB SNMPv2-CONF
SNMPv2-SMI SNMPv2-TC

Imported symbols

hwApType hwApRegionIndex hwApIndex
hwApMac hwWlan OBJECT-GROUP
MODULE-COMPLIANCE NOTIFICATION-GROUP IpAddress
Integer32 OBJECT-TYPE MODULE-IDENTITY
NOTIFICATION-TYPE RowStatus

Defined Types

HwApUpdateEntry  
SEQUENCE    
  hwApUpdateFilename STRING
  hwApUpdateResultMask STRING
  hwApUpdateAdminOper INTEGER
  hwApUpdatePercent Integer32
  hwApUpdateRowStatus RowStatus
  hwApUpdateResultInfo STRING
  hwApUpdateApIdSetMask STRING

HwApUpdateProgressEntry  
SEQUENCE    
  hwApUpdateProgressStatus INTEGER
  hwApUpdateProgress Integer32
  hwApFlashProgress Integer32

HwMacApUpdateProgressEntry  
SEQUENCE    
  hwMacApUpdateProgressStatus INTEGER
  hwMacApUpdateProgress Integer32
  hwMacApFlashProgress Integer32

HwSingleApUpdateEntry  
SEQUENCE    
  hwSingleApUpdateAdminOper INTEGER
  hwSingleApUpdatePercent Integer32
  hwSingleApUpdateResult INTEGER
  hwSingleApUpdateFilename STRING

HwMacSingleApUpdateEntry  
SEQUENCE    
  hwMacSingleApUpdateAdminOper INTEGER
  hwMacSingleApUpdatePercent Integer32
  hwMacSingleApUpdateResult INTEGER
  hwMacSingleApUpdateFilename STRING

HwApTypeRegionUpdateEntry  
SEQUENCE    
  hwApTypeRegionUpdateFilename STRING
  hwApTypeRegionUpdateResultMask STRING
  hwApTypeRegionUpdateAdminOper INTEGER
  hwApTypeRegionUpdatePercent Integer32
  hwApTypeRegionUpdateRowStatus RowStatus
  hwApTypeRegionUpdateResultInfo STRING

Defined Values

hwWlanUpdate 1.3.6.1.4.1.2011.6.139.7
The MIB module defines the AP update operation.
MODULE-IDENTITY    

hwWlanUpdateNotifications 1.3.6.1.4.1.2011.6.139.7.1
OBJECT IDENTIFIER    

hwApUpdateBeginNotify 1.3.6.1.4.1.2011.6.139.7.1.1
This notification occurs when ap begin to update.
NOTIFICATION-TYPE    

hwApUpdateResultNotify 1.3.6.1.4.1.2011.6.139.7.1.2
This notification occurs when ap has updated successfully or failed.
NOTIFICATION-TYPE    

hwApUpdateUbootNotMatchNotify 1.3.6.1.4.1.2011.6.139.7.1.3
This notification occurs when ap uboot not match version.
NOTIFICATION-TYPE    

hwWlanUpdateNotifyObjects 1.3.6.1.4.1.2011.6.139.7.2
OBJECT IDENTIFIER    

hwApUpdateResult 1.3.6.1.4.1.2011.6.139.7.2.1
Ap update result. 1 means success 2 means failure, unknown error 3 means failure, insufficient AP memory 4 means failure, fail to download the file 5 means failure, mismatch between the version in the EFS tail and the version in the file name 6 means failure, invalid file name 7 means failure, mismatch between the AP type in the EFS tail and the AP 8 means failure, file content error 9 means failure, writing flash memory failure 10 means failure, upgrade timeout 11 means failure, the communication between AP and AC fails
OBJECT-TYPE    
  INTEGER success(1), failureUnknownError(2), failureInsufficientMemory(3), failureDownloadFileFailure(4), failureMismatchVersionEfsAndFileName(5), failureInvalidFileName(6), failureMismatchApTypeInEfs(7), failureFileContentError(8), failureWriteFlashFailure(9), failureTimeoutForUpgrade(10), failureCommunicationFaultApAndAc(11)  

hwApUpdateTime 1.3.6.1.4.1.2011.6.139.7.2.2
Description.
OBJECT-TYPE    
  STRING  

hwApUpdateByFileName 1.3.6.1.4.1.2011.6.139.7.2.3
Description.
OBJECT-TYPE    
  STRING  

hwApUpdateNextOper 1.3.6.1.4.1.2011.6.139.7.2.4
Description.
OBJECT-TYPE    
  INTEGER notReset(1), reset(2)  

hwApUpdateResultStatus 1.3.6.1.4.1.2011.6.139.7.2.5
Description.
OBJECT-TYPE    
  STRING  

hwApUpdateObjects 1.3.6.1.4.1.2011.6.139.7.3
OBJECT IDENTIFIER    

hwApUpdateConfig 1.3.6.1.4.1.2011.6.139.7.3.1
OBJECT IDENTIFIER    

hwApUpdateFTPIPAddress 1.3.6.1.4.1.2011.6.139.7.3.1.1
FTP Server IP for Ap Update.
OBJECT-TYPE    
  IpAddress  

hwApUpdateFTPUsername 1.3.6.1.4.1.2011.6.139.7.3.1.2
FTP Client Username for Ap Update.
OBJECT-TYPE    
  STRING  

hwApUpdateFTPPassword 1.3.6.1.4.1.2011.6.139.7.3.1.3
FTP Client Password for Ap Update.
OBJECT-TYPE    
  STRING  

hwApUpdateMode 1.3.6.1.4.1.2011.6.139.7.3.1.4
The mode of Ap Update. ftp(1): Ap Image Update by ftp. ac(2): Ap Image Update by ac-ap protocol.
OBJECT-TYPE    
  INTEGER ftp(1), ac(2), sftp(3)  

hwApUpdateSFTPIPAddress 1.3.6.1.4.1.2011.6.139.7.3.1.5
Description.
OBJECT-TYPE    
  IpAddress  

hwApUpdateSFTPUsername 1.3.6.1.4.1.2011.6.139.7.3.1.6
Description.
OBJECT-TYPE    
  STRING  

hwApUpdateSFTPPassword 1.3.6.1.4.1.2011.6.139.7.3.1.7
Description.
OBJECT-TYPE    
  STRING  

hwApUpdateFTPMaxConnectNum 1.3.6.1.4.1.2011.6.139.7.3.1.8
Description.
OBJECT-TYPE    
  Integer32  

hwApUpdateSFTPMaxConnectNum 1.3.6.1.4.1.2011.6.139.7.3.1.9
Description.
OBJECT-TYPE    
  Integer32  

hwApUpdateFTPIPv6Address 1.3.6.1.4.1.2011.6.139.7.3.1.10
Description.
OBJECT-TYPE    
  STRING Size(0..46)  

hwApUpdateSFTPIPv6Address 1.3.6.1.4.1.2011.6.139.7.3.1.11
Description.
OBJECT-TYPE    
  STRING Size(0..46)  

hwApUpdateTable 1.3.6.1.4.1.2011.6.139.7.3.2
Ap Update Table. The index of this table is hwApType.
OBJECT-TYPE    
  SEQUENCE OF  
    HwApUpdateEntry

hwApUpdateEntry 1.3.6.1.4.1.2011.6.139.7.3.2.1
Ap UpdateEntry.
OBJECT-TYPE    
  HwApUpdateEntry  

hwApUpdateFilename 1.3.6.1.4.1.2011.6.139.7.3.2.1.1
The ap image filename of ap update.
OBJECT-TYPE    
  STRING  

hwApUpdateResultMask 1.3.6.1.4.1.2011.6.139.7.3.2.1.2
The result of ap update. Every bit is used to describe the ap updated successfully or unsuccessfully. 0 means success, and 1 means unsuccess. The value of this node is hexadecimal integer block. Each Byte describes 8 aps are updated successfully or unsuccessfully. For example, the first Byte describes ap 0~7 is updated successfully or unsuccessfully, and the second Byte describes ap 8~15 is updated successfully or unsuccessfully. Such as, if only ap 0,4,5,6,7,9 is updated unsuccessfully, the binary number is 11110001 and 00000010, the hexadecimal number is 0xF1 and 0x2, so the first Byte of this node is 0xF1, and the second Byte is 0x2.
OBJECT-TYPE    
  STRING  

hwApUpdateAdminOper 1.3.6.1.4.1.2011.6.139.7.3.2.1.3
Ap update administration operation. start(1): start ap update. reset(2): reset all the ap with specifed type after update finished
OBJECT-TYPE    
  INTEGER start(1), reset(2), cancel(3)  

hwApUpdatePercent 1.3.6.1.4.1.2011.6.139.7.3.2.1.4
The percentage is only used for a online update operation. If the update begins, the percentage becomes 1. when some AP's update is finished, the percentage stands for the percentage which is the number of APs upgraded to the total number of APs. If the update is finished, the percentage will be 100.
OBJECT-TYPE    
  Integer32  

hwApUpdateRowStatus 1.3.6.1.4.1.2011.6.139.7.3.2.1.5
Row status: mainly to support to add or delete the relationship of ap's type and the update filename. createAndGo(4): add a relationship. destroy(6): delete the relationship.
OBJECT-TYPE    
  RowStatus  

hwApUpdateResultInfo 1.3.6.1.4.1.2011.6.139.7.3.2.1.6
The result of ap update. Every bit is used to describe the ap updated successfully or unsuccessfully. 0 means success, and 1 means unsuccess. The value of this node is hexadecimal integer block. Each Byte describes 8 aps are updated successfully or unsuccessfully. For example, the first Byte describes ap 0~7 is updated successfully or unsuccessfully, and the second Byte describes ap 8~15 is updated successfully or unsuccessfully. Such as, if only ap 0,4,5,6,7,9 is updated unsuccessfully, the binary number is 11110001 and 00000010, the hexadecimal number is 0xF1 and 0x2, so the first Byte of this node is 0xF1, and the second Byte is 0x2.
OBJECT-TYPE    
  STRING  

hwApUpdateApIdSetMask 1.3.6.1.4.1.2011.6.139.7.3.2.1.7
Description.
OBJECT-TYPE    
  STRING  

hwApUpdateProgressTable 1.3.6.1.4.1.2011.6.139.7.3.3
Description.
OBJECT-TYPE    
  SEQUENCE OF  
    HwApUpdateProgressEntry

hwApUpdateProgressEntry 1.3.6.1.4.1.2011.6.139.7.3.3.1
Description.
OBJECT-TYPE    
  HwApUpdateProgressEntry  

hwApUpdateProgressStatus 1.3.6.1.4.1.2011.6.139.7.3.3.1.1
Description.
OBJECT-TYPE    
  INTEGER noUpdateResult(-1), updating(0), updateSuccessful(1), updateFailed(2), insufficientApMemory(3), failToDownloadFile(4), efsAndVersionMismatched(5), invalidFileName(6), efsAndApTypeMismatched(7), fileContentError(8), writingMemoryError(9), updateTimeout(10), apAcLinkDown(11), noNeedToUpdate(12), updateCancel(13), sendFirstFileFailed(14), receiveFileFailed(15), retransferFileFailed(16), updateOverMaxTime(17), noResult(18), waitForNextBatch(19), noNeedUpdateNeedReset(20), neitherNeedUpdateNorReset(21), fileLoading(22), identifierErr(23), notInConfig(24), getFtpInfoFailed(25), getSftpInfoFailed(26), blockFull(27), readFileFailed(31), normalToStandby(32), modeChanged(33), succeedNeedReset(34)  

hwApUpdateProgress 1.3.6.1.4.1.2011.6.139.7.3.3.1.2
Description.
OBJECT-TYPE    
  Integer32  

hwApFlashProgress 1.3.6.1.4.1.2011.6.139.7.3.3.1.3
Description.
OBJECT-TYPE    
  Integer32  

hwMacApUpdateProgressTable 1.3.6.1.4.1.2011.6.139.7.3.4
Description.
OBJECT-TYPE    
  SEQUENCE OF  
    HwMacApUpdateProgressEntry

hwMacApUpdateProgressEntry 1.3.6.1.4.1.2011.6.139.7.3.4.1
Description.
OBJECT-TYPE    
  HwMacApUpdateProgressEntry  

hwMacApUpdateProgressStatus 1.3.6.1.4.1.2011.6.139.7.3.4.1.1
Description.
OBJECT-TYPE    
  INTEGER noUpdateResult(-1), updating(0), updateSuccessful(1), updateFailed(2), insufficientApMemory(3), failToDownloadFile(4), efsAndVersionMismatched(5), invalidFileName(6), efsAndApTypeMismatched(7), fileContentError(8), writingMemoryError(9), updateTimeout(10), apAcLinkDown(11), noNeedToUpdate(12), updateCancel(13), sendFirstFileFailed(14), receiveFileFailed(15), retransferFileFailed(16), updateOverMaxTime(17), noResult(18), waitForNextBatch(19), noNeedUpdateNeedReset(20), neitherNeedUpdateNorReset(21), fileLoading(22), identifierErr(23), notInConfig(24), getFtpInfoFailed(25), getSftpInfoFailed(26), blockFull(27), readFileFailed(31), normalToStandby(32), modeChanged(33), succeedNeedReset(34)  

hwMacApUpdateProgress 1.3.6.1.4.1.2011.6.139.7.3.4.1.2
Description.
OBJECT-TYPE    
  Integer32  

hwMacApFlashProgress 1.3.6.1.4.1.2011.6.139.7.3.4.1.3
Description.
OBJECT-TYPE    
  Integer32  

hwSingleApUpdateTable 1.3.6.1.4.1.2011.6.139.7.3.5
Description.
OBJECT-TYPE    
  SEQUENCE OF  
    HwSingleApUpdateEntry

hwSingleApUpdateEntry 1.3.6.1.4.1.2011.6.139.7.3.5.1
Description.
OBJECT-TYPE    
  HwSingleApUpdateEntry  

hwSingleApUpdateAdminOper 1.3.6.1.4.1.2011.6.139.7.3.5.1.1
Description.
OBJECT-TYPE    
  INTEGER start(1), reset(2), cancel(3)  

hwSingleApUpdatePercent 1.3.6.1.4.1.2011.6.139.7.3.5.1.2
Description.
OBJECT-TYPE    
  Integer32  

hwSingleApUpdateResult 1.3.6.1.4.1.2011.6.139.7.3.5.1.3
Description.
OBJECT-TYPE    
  INTEGER success(0), failed(1)  

hwSingleApUpdateFilename 1.3.6.1.4.1.2011.6.139.7.3.5.1.4
Description.
OBJECT-TYPE    
  STRING  

hwMacSingleApUpdateTable 1.3.6.1.4.1.2011.6.139.7.3.6
Description.
OBJECT-TYPE    
  SEQUENCE OF  
    HwMacSingleApUpdateEntry

hwMacSingleApUpdateEntry 1.3.6.1.4.1.2011.6.139.7.3.6.1
Description.
OBJECT-TYPE    
  HwMacSingleApUpdateEntry  

hwMacSingleApUpdateAdminOper 1.3.6.1.4.1.2011.6.139.7.3.6.1.1
Description.
OBJECT-TYPE    
  INTEGER start(1), reset(2), cancel(3)  

hwMacSingleApUpdatePercent 1.3.6.1.4.1.2011.6.139.7.3.6.1.2
Description.
OBJECT-TYPE    
  Integer32  

hwMacSingleApUpdateResult 1.3.6.1.4.1.2011.6.139.7.3.6.1.3
Description.
OBJECT-TYPE    
  INTEGER success(0), failed(1)  

hwMacSingleApUpdateFilename 1.3.6.1.4.1.2011.6.139.7.3.6.1.4
Description.
OBJECT-TYPE    
  STRING  

hwApTypeRegionUpdateTable 1.3.6.1.4.1.2011.6.139.7.3.7
Description.
OBJECT-TYPE    
  SEQUENCE OF  
    HwApTypeRegionUpdateEntry

hwApTypeRegionUpdateEntry 1.3.6.1.4.1.2011.6.139.7.3.7.1
Description.
OBJECT-TYPE    
  HwApTypeRegionUpdateEntry  

hwApTypeRegionUpdateFilename 1.3.6.1.4.1.2011.6.139.7.3.7.1.1
Description.
OBJECT-TYPE    
  STRING  

hwApTypeRegionUpdateResultMask 1.3.6.1.4.1.2011.6.139.7.3.7.1.2
Description.The result of ap update. Every bit is used to describe the ap updated successfully or unsuccessfully. 0 means success, and 1 means unsuccess. The value of this node is hexadecimal integer block. Each Byte describes 8 aps are updated successfully or unsuccessfully. For example, the first Byte describes ap 0~7 is updated successfully or unsuccessfully, and the second Byte describes ap 8~15 is updated successfully or unsuccessfully. Such as, if only ap 0,4,5,6,7,9 is updated unsuccessfully, the binary number is 11110001 and 00000010, the hexadecimal number is 0xF1 and 0x2, so the first Byte of this node is 0xF1, and the second Byte is 0x2.
OBJECT-TYPE    
  STRING  

hwApTypeRegionUpdateAdminOper 1.3.6.1.4.1.2011.6.139.7.3.7.1.3
Description.
OBJECT-TYPE    
  INTEGER start(1), reset(2), cancel(3)  

hwApTypeRegionUpdatePercent 1.3.6.1.4.1.2011.6.139.7.3.7.1.4
Description.
OBJECT-TYPE    
  Integer32  

hwApTypeRegionUpdateRowStatus 1.3.6.1.4.1.2011.6.139.7.3.7.1.5
Description.
OBJECT-TYPE    
  RowStatus  

hwApTypeRegionUpdateResultInfo 1.3.6.1.4.1.2011.6.139.7.3.7.1.6
Description.
OBJECT-TYPE    
  STRING  

hwWlanUpdateObjects 1.3.6.1.4.1.2011.6.139.7.4
OBJECT IDENTIFIER    

hwWlanUpdateConformance 1.3.6.1.4.1.2011.6.139.7.5
OBJECT IDENTIFIER    

hwWlanUpdateCompliances 1.3.6.1.4.1.2011.6.139.7.5.1
OBJECT IDENTIFIER    

hwWlanUpdateCompliance 1.3.6.1.4.1.2011.6.139.7.5.1.1
Description.
MODULE-COMPLIANCE    

hwWlanUpdateObjectGroups 1.3.6.1.4.1.2011.6.139.7.5.2
OBJECT IDENTIFIER    

hwWlanUpdateNotificationsGroup 1.3.6.1.4.1.2011.6.139.7.5.2.1
Description.
NOTIFICATION-GROUP    

hwWlanUpdateNotifyObjectsGroup 1.3.6.1.4.1.2011.6.139.7.5.2.2
Description.
OBJECT-GROUP    

hwApUpdateObjectsGroup 1.3.6.1.4.1.2011.6.139.7.5.2.3
Description.
OBJECT-GROUP