HUAWEI-WLAN-AC-MIB

File: HUAWEI-WLAN-AC-MIB.mib (12369 bytes)

Imported modules

HUAWEI-WLAN-MIB IF-MIB P-BRIDGE-MIB
SNMPv2-CONF SNMPv2-SMI SNMPv2-TC

Imported symbols

hwWlan InterfaceIndex EnabledStatus
OBJECT-GROUP IpAddress Integer32
OBJECT-TYPE MODULE-IDENTITY RowStatus

Defined Types

HwWlanTunnelAccessInterfaceBindEntry  
SEQUENCE    
  hwWlanTunnelAccessInterfaceIndex InterfaceIndex
  hwWlanTunnelAccessSlotId Integer32
  hwWlanTunnelAccessInterfaceBindRawStatus RowStatus

HwWlanRessembleBoardBindEntry  
SEQUENCE    
  hwWlanRessembleBoardBindSlotId Integer32
  hwWlanRessembleBoardBindRawStatus RowStatus

HwWlanAccessTypeEnableEntry  
SEQUENCE    
  hwWlanAccessIfIndex InterfaceIndex
  hwWlanDirectAccessEnable EnabledStatus

HwWlanAccessInfoEntry  
SEQUENCE    
  hwWlanAccessInfoApIndex Integer32
  hwWlanAccessInfoApIP IpAddress
  hwWlanAccessInfoApControlPort Integer32
  hwWlanAccessInfoApDataPort Integer32
  hwWlanAccessInfoAccessInterfaceName OCTET STRING
  hwWlanAccessInfoAccessType Integer32

HwWlanVeSubInterfaceWlanEnableEntry  
SEQUENCE    
  hwWlanVeSubInterfaceIndex InterfaceIndex
  hwWlanVeSubInterfaceWlanEnable EnabledStatus

Defined Values

hwWlanACManagement 1.3.6.1.4.1.2011.6.139.100
Wlan AC management.
MODULE-IDENTITY    

hwWlanAcSourceBind 1.3.6.1.4.1.2011.6.139.100.1
Bind the loopback number as ac source.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwWlanTunnelAccessInterfaceBindTable 1.3.6.1.4.1.2011.6.139.100.2
Bind the interface as the access interface when the access type is tunnle access.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanTunnelAccessInterfaceBindEntry

hwWlanTunnelAccessInterfaceBindEntry 1.3.6.1.4.1.2011.6.139.100.2.1
The entry of hwWlanTunnelAccessInterfaceBindTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanTunnelAccessInterfaceBindEntry  

hwWlanTunnelAccessInterfaceIndex 1.3.6.1.4.1.2011.6.139.100.2.1.1
The index of the tunnel access interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

hwWlanTunnelAccessSlotId 1.3.6.1.4.1.2011.6.139.100.2.1.2
The slot id of the board which receive the user packets.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..16  

hwWlanTunnelAccessInterfaceBindRawStatus 1.3.6.1.4.1.2011.6.139.100.2.1.3
This table can be created and deleted.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwWlanRessembleBoardBindTable 1.3.6.1.4.1.2011.6.139.100.3
The table which configrate wlan ressemble board bind table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanRessembleBoardBindEntry

hwWlanRessembleBoardBindEntry 1.3.6.1.4.1.2011.6.139.100.3.1
The entry of hwWlanRessembleBoardBindTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanRessembleBoardBindEntry  

hwWlanRessembleBoardBindSlotId 1.3.6.1.4.1.2011.6.139.100.3.1.1
The slot id of the board which will be bind as the ressemble board.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..16  

hwWlanRessembleBoardBindRawStatus 1.3.6.1.4.1.2011.6.139.100.3.1.2
This table can be created and deleted.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwWlanAccessTypeEnableTable 1.3.6.1.4.1.2011.6.139.100.4
The table configurate the wlan access type of the access interface. It can be used for ethernet interface/ethernet sub interface/trunk interface/trunk sub interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanAccessTypeEnableEntry

hwWlanAccessTypeEnableEntry 1.3.6.1.4.1.2011.6.139.100.4.1
The entry of hwWlanAccessTypeEnableTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanAccessTypeEnableEntry  

hwWlanAccessIfIndex 1.3.6.1.4.1.2011.6.139.100.4.1.1
The index of the wlan access interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

hwWlanDirectAccessEnable 1.3.6.1.4.1.2011.6.139.100.4.1.2
Enable the access type of the wlan access interface as direct access.
Status: current Access: read-create
OBJECT-TYPE    
  EnabledStatus  

hwWlanAccessInfoTable 1.3.6.1.4.1.2011.6.139.100.5
The table of wlan ap access infomation.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanAccessInfoEntry

hwWlanAccessInfoEntry 1.3.6.1.4.1.2011.6.139.100.5.1
The entry of hwWlanAccessInfoTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanAccessInfoEntry  

hwWlanAccessInfoApIndex 1.3.6.1.4.1.2011.6.139.100.5.1.1
The index of ap device.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..4096  

hwWlanAccessInfoApIP 1.3.6.1.4.1.2011.6.139.100.5.1.2
The ip address of the ap device.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwWlanAccessInfoApControlPort 1.3.6.1.4.1.2011.6.139.100.5.1.3
The control port of the ap device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanAccessInfoApDataPort 1.3.6.1.4.1.2011.6.139.100.5.1.4
The data port of the ap device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWlanAccessInfoAccessInterfaceName 1.3.6.1.4.1.2011.6.139.100.5.1.5
The access interface name of the ap device.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanAccessInfoAccessType 1.3.6.1.4.1.2011.6.139.100.5.1.6
The access type of the ap device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..1  

hwWlanVeSubInterfaceWlanEnableTable 1.3.6.1.4.1.2011.6.139.100.6
When the wlan access type is tunnle access, the virtual ethernet sub interface must be configurated wlan enble to be used by the wlan user.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanVeSubInterfaceWlanEnableEntry

hwWlanVeSubInterfaceWlanEnableEntry 1.3.6.1.4.1.2011.6.139.100.6.1
The entry of hwWlanVeSubInterfaceWlanEnableTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanVeSubInterfaceWlanEnableEntry  

hwWlanVeSubInterfaceIndex 1.3.6.1.4.1.2011.6.139.100.6.1.1
The index of the WLAN virtual etherner interface which used for the wlan user access.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

hwWlanVeSubInterfaceWlanEnable 1.3.6.1.4.1.2011.6.139.100.6.1.2
Enable wlan.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

hwWlanAcManageGroups 1.3.6.1.4.1.2011.6.139.100.7
OBJECT IDENTIFIER    

hwWlanAcSourceBindGroup 1.3.6.1.4.1.2011.6.139.100.7.1
Bind the loopback number as ac source.
Status: current Access: read-write
OBJECT-GROUP    

hwWlanTunnelAccessInterfaceBindGroup 1.3.6.1.4.1.2011.6.139.100.7.2
Bind the interface as the access interface when the access type is tunnle access.
Status: current Access: read-write
OBJECT-GROUP    

hwWlanRessembleBoardBindGroup 1.3.6.1.4.1.2011.6.139.100.7.3
Configurate wlan ressemble board bind.
Status: current Access: read-write
OBJECT-GROUP    

hwWlanAccessTypeEnableGroup 1.3.6.1.4.1.2011.6.139.100.7.4
Configurate the wlan access type of the access interface.
Status: current Access: read-write
OBJECT-GROUP    

hwWlanAccessInfoGroup 1.3.6.1.4.1.2011.6.139.100.7.5
Wlan ap access infomation.
Status: current Access: read-write
OBJECT-GROUP    

hwWlanVeSubInterfaceWlanEnableGroup 1.3.6.1.4.1.2011.6.139.100.7.6
When the wlan access type is tunnle access, the virtual ethernet sub interface must be configurated wlan enble to be used by the wlan user.
Status: current Access: read-write
OBJECT-GROUP