HUAWEI-VSQMCBB-MIB

File: HUAWEI-VSQMCBB-MIB.mib (16643 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-CONF	SNMPv2-TC
HUAWEI-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	NOTIFICATION-TYPE
private	MODULE-COMPLIANCE	OBJECT-GROUP
NOTIFICATION-GROUP	TEXTUAL-CONVENTION	IpAddress
TimeTicks	Counter32	Integer32
Unsigned32	RowStatus	DisplayString
huaweiUtility

Defined Types

HwVsqmWorstHistoryStatisticQueryEntry
SEQUENCE
	hwVsqmWorstHistoryStatisIfIndex	Unsigned32
	hwVsqmWorstHistoryStatisSeqNo	Unsigned32
	hwVsqmWorstHistoryStatisMonitorSecHighSince1970	Unsigned32
	hwVsqmWorstHistoryStatisMonitorSecLowSince1970	Unsigned32
	hwVsqmWorstHistoryStatisLocalIPAddress	IpAddress
	hwVsqmWorstHistoryStatisLocalUdpPort	Unsigned32
	hwVsqmWorstHistoryStatisRemoteIPAddress	IpAddress
	hwVsqmWorstHistoryStatisRemoteUdpPort	Unsigned32
	hwVsqmWorstHistoryStatisTotalRecivePacketNum	Integer32
	hwVsqmWorstHistoryStatisTotalSendPacketNum	Integer32
	hwVsqmWorstHistoryStatisCurrentLoopDelay	Integer32
	hwVsqmWorstHistoryStatisMeanLoopDelay	Integer32
	hwVsqmWorstHistoryStatisCurrentJitter	Integer32
	hwVsqmWorstHistoryStatisMeanJitter	Integer32
	hwVsqmWorstHistoryStatisTotalPacketLossNum	Integer32
	hwVsqmWorstHistoryStatisPacketLossRate	Integer32
	hwVsqmWorstHistoryStatisLocSysDiscardPktNum	Integer32
	hwVsqmWorstHistoryStatisLocDiscardRate	Integer32
	hwVsqmWorstHistoryStatisCurrentMosLq	Integer32
	hwVsqmWorstHistoryStatisCurrentMosCq	Integer32
	hwVsqmWorstHistoryStatisMeanMosCq	Integer32
	hwVsqmWorstHistoryStatisRowStatus	RowStatus

Defined Values

hwVsqm		1.3.6.1.4.1.2011.6.160
This mib is used for defining VSQM statistic objects.
MODULE-IDENTITY

hwVsqmObjects		1.3.6.1.4.1.2011.6.160.1
OBJECT IDENTIFIER

hwMonitorThresholdCfgTable		1.3.6.1.4.1.2011.6.160.1.1
OBJECT IDENTIFIER

hwMosThreshold		1.3.6.1.4.1.2011.6.160.1.1.1
Indicates Mos Threshold. 0~50 indicate the voice quality. The Mos value is more, the voice quality is better. 127 indicate the invalid value. Default: 35 Unit: 1/10
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..50 \| 127

hwJitterThreshold		1.3.6.1.4.1.2011.6.160.1.1.2
Indicates the threshold of network jitter. Default: 60 Unit: millisecond
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..500

hwPacketLossThreshold		1.3.6.1.4.1.2011.6.160.1.1.3
Indicates the threshold of packet loss rate in the network. Default: 50 Unit: 1/1000
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..1000

hwLoopDelayThreshold		1.3.6.1.4.1.2011.6.160.1.1.4
Indicates the threshold of loop delay. Default: 400 Unit: millisecond
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..2000

hwPacketDiscardThreshold		1.3.6.1.4.1.2011.6.160.1.1.5
Indicates the threshold of discard packets by JitterBuffer. Default: 1 Unit: 1/1000
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..1000

hwThresholdMonitorCtrlTable		1.3.6.1.4.1.2011.6.160.1.2
OBJECT IDENTIFIER

hwThresholdMonitorTime		1.3.6.1.4.1.2011.6.160.1.2.1
Indicates Threshold Monitor Time. 0 means never time out. Default: 1440 Unit: minute
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..10080

hwThresholdMonitorResidualTime		1.3.6.1.4.1.2011.6.160.1.2.2
Indicates the residual time of the Threshold Monitor. -1 means the Threshold Monitor is disable. 0 means never time out. 1~604800: the residual time of the Threshold Monitor. When show, need to change to hour/minute/second. Unit: s
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-1 \| 0..604800

hwThresholdMonitorWorstHistoryAgingTime		1.3.6.1.4.1.2011.6.160.1.2.3
Indicates the aging time of the Threshold Monitor. 1~90: the aging time of the Threshold Monitor. Default: 30 Unit: day
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	1..90

hwThresholdMonitorSwitch		1.3.6.1.4.1.2011.6.160.1.2.4
Indicates the Threshold Monitor Switch. Options: 1. enable(1) -enable the Threshold Monitor 2. disbale(2) -disable the Threshold Monitor
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disbale(2)

hwVsqmWorstHistoryStatisticQueryTable		1.3.6.1.4.1.2011.6.160.1.3
This table is used to query VSQM worst history statistic. The indexes of this table are hwVsqmWorstHistoryStatisIfIndex, hwVsqmWorstHistoryStatisSeqNo.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwVsqmWorstHistoryStatisticQueryEntry

hwVsqmWorstHistoryStatisticQueryEntry		1.3.6.1.4.1.2011.6.160.1.3.1
This table is used to query VSQM worst history statistic. The indexes of this entry are hwVsqmWorstHistoryStatisIfIndex, hwVsqmWorstHistoryStatisSeqNo.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwVsqmWorstHistoryStatisticQueryEntry

hwVsqmWorstHistoryStatisIfIndex		1.3.6.1.4.1.2011.6.160.1.3.1.1
Indicates the shelf/slot/port index.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	0..4294967295

hwVsqmWorstHistoryStatisSeqNo		1.3.6.1.4.1.2011.6.160.1.3.1.2
Indicates the VSQM satatistic sequence num.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	0..9

hwVsqmWorstHistoryStatisMonitorSecHighSince1970		1.3.6.1.4.1.2011.6.160.1.3.1.3
Indicates the hight 32 bits of secconds since 1970. MonitorSecHighSince1970 and MonitorSecLowSince1970 all are 0xFFFFFFFF means invalid.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

hwVsqmWorstHistoryStatisMonitorSecLowSince1970		1.3.6.1.4.1.2011.6.160.1.3.1.4
Indicates the low 32 bits of secconds since 1970. MonitorSecHighSince1970 and MonitorSecLowSince1970 all are 0xFFFFFFFF means invalid.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..4294967295

hwVsqmWorstHistoryStatisLocalIPAddress		1.3.6.1.4.1.2011.6.160.1.3.1.5
Indicates the local IP address. 255.255.255.255 indicates invalid ip address.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwVsqmWorstHistoryStatisLocalUdpPort		1.3.6.1.4.1.2011.6.160.1.3.1.6
Indicates the local UDP Port.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..65535

hwVsqmWorstHistoryStatisRemoteIPAddress		1.3.6.1.4.1.2011.6.160.1.3.1.7
Indicates the remote IP address. 255.255.255.255 indicates invalid IP address.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwVsqmWorstHistoryStatisRemoteUdpPort		1.3.6.1.4.1.2011.6.160.1.3.1.8
Indicates the remote UDP Port.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..65535

hwVsqmWorstHistoryStatisTotalRecivePacketNum		1.3.6.1.4.1.2011.6.160.1.3.1.9
Indicates the total receive packet number. -1 indicates the invalid value.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-1 \| 0..2147483647

hwVsqmWorstHistoryStatisTotalSendPacketNum		1.3.6.1.4.1.2011.6.160.1.3.1.10
Indicates the total send packet number. -1 indicates the invalid value.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-1 \| 0..2147483647

hwVsqmWorstHistoryStatisCurrentLoopDelay		1.3.6.1.4.1.2011.6.160.1.3.1.11
Indicates the current Loop Delay. -1 indicates the invalid value. Unit: millisecond
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-1 \| 0..2147483647

hwVsqmWorstHistoryStatisMeanLoopDelay		1.3.6.1.4.1.2011.6.160.1.3.1.12
Indicates the current Loop Delay. -1 indicates the invalid value. Unit: millisecond
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-1 \| 0..2147483647

hwVsqmWorstHistoryStatisCurrentJitter		1.3.6.1.4.1.2011.6.160.1.3.1.13
Indicates the current Network Jitter. -1 indicates the invalid value. Unit: millisecond
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-1 \| 0..2147483647

hwVsqmWorstHistoryStatisMeanJitter		1.3.6.1.4.1.2011.6.160.1.3.1.14
Indicates the Mean Network Jitter. -1 indicates the invalid value. Unit: millisecond
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-1 \| 0..2147483647

hwVsqmWorstHistoryStatisTotalPacketLossNum		1.3.6.1.4.1.2011.6.160.1.3.1.15
Indicates the total Packet Loss Number. -1 indicates the invalid value.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-1 \| 0..2147483647

hwVsqmWorstHistoryStatisPacketLossRate		1.3.6.1.4.1.2011.6.160.1.3.1.16
Indicates the Packet Loss Rate in the interval. -1 indicates the invalid value. Unit: 1/1000
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-1 \| 0..1000

hwVsqmWorstHistoryStatisLocSysDiscardPktNum		1.3.6.1.4.1.2011.6.160.1.3.1.17
Indicates the total discard Packet Loss Number. -1 indicates the invalid value.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-1 \| 0..2147483647

hwVsqmWorstHistoryStatisLocDiscardRate		1.3.6.1.4.1.2011.6.160.1.3.1.18
Indicates the discard Packet Loss Rate in the interval. -1 indicates the invalid value. Unit: 1/1000
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-1 \| 0..1000

hwVsqmWorstHistoryStatisCurrentMosLq		1.3.6.1.4.1.2011.6.160.1.3.1.19
Indicates the Mos of listening quality in the interval. -1 indicates the invalid value. Unit: 1/10
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-1 \| 0..50

hwVsqmWorstHistoryStatisCurrentMosCq		1.3.6.1.4.1.2011.6.160.1.3.1.20
Indicates the Mos of conversational quality in the interval. -1: indicate the invalid value. Unit: 1/10
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-1 \| 0..50

hwVsqmWorstHistoryStatisMeanMosCq		1.3.6.1.4.1.2011.6.160.1.3.1.21
Indicates the Mean Mos of conversational quality in the whole talk. -1: indicate the invalid value. Unit: 1/10
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-1 \| 0..50

hwVsqmWorstHistoryStatisRowStatus		1.3.6.1.4.1.2011.6.160.1.3.1.22
Currently only destory(6) is valid. 1 -active(1) 2 -notInService(2) 3 -notReady(3) 4 -createAndGo(4) 5 -createAndWait(5) 6 -destory(6)
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus	-1 \| 1..6