HUAWEI-VOIP-SIP-MIB

File: HUAWEI-VOIP-SIP-MIB.mib (166325 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
HUAWEI-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
private MODULE-COMPLIANCE OBJECT-GROUP
NOTIFICATION-GROUP TEXTUAL-CONVENTION IpAddress
TimeTicks Counter32 Integer32
Unsigned32 RowStatus DisplayString
huaweiUtility

Defined Types

HwVGWConfigEntry  
SEQUENCE    
  hwSipVgwId Integer32
  hwSipVgwMediaIPAddress IpAddress
  hwSipVgwSigIPAddress IpAddress
  hwSipVgwSigPort Integer32
  hwSipVgwProxyIPAddress IpAddress
  hwSipVgwProxyPort Integer32
  hwSipVgwTransMode INTEGER
  hwSipVgwDomainName OCTET STRING
  hwSipVgwProxyDomainName OCTET STRING
  hwSipVgwHomeDomainName OCTET STRING
  hwSipVgwRegisterURI OCTET STRING
  hwSipVgwConferenceFactoryURI OCTET STRING
  hwSipVgwDesc OCTET STRING
  hwSipVgwPhoneContext OCTET STRING
  hwSipVgwAdminStatus INTEGER
  hwSipVgwRowStatus RowStatus
  hwSipVgwProfileIndex Integer32
  hwSipVgwProfileName OCTET STRING
  hwSipVgwProxyIPAddress2 IpAddress
  hwSipVgwProxyPort2 Integer32
  hwSipVgwAuthUserName OCTET STRING
  hwSipVgwAuthPassword OCTET STRING
  hwSipVgwMediaIPAddrDhcpClientIndex Integer32
  hwSipVgwSigIPAddrDhcpClientIndex Integer32
  hwSipVgwSrvLogicName OCTET STRING
  hwSipVgwServerDhcpOption INTEGER
  hwSipVgwSwitchoverDestination INTEGER
  hwSipVgwMediaAddrName OCTET STRING
  hwSipVgwSignalAddrName OCTET STRING
  hwSipVgwAuthPasswordMode INTEGER
  hwSipVgwAuthHA1 OCTET STRING
  hwSipVgwAuthMode INTEGER
  hwSipVgwSubUAProfile INTEGER
  hwSipVgwSubRegState INTEGER
  hwSipVgwSubMwi INTEGER
  hwSipVgwSdpNegoMode INTEGER
  hwSipVgwProxyDualHome INTEGER
  hwSipVgwProxyCheckMode INTEGER
  hwSipVgwProxyRefreshMode INTEGER
  hwSipVgwKeepActiveFlag INTEGER
  hwSipVgwKeepActivePeriod Integer32
  hwSipVgwRegMode INTEGER

HwVGWRunningEntry  
SEQUENCE    
  hwSipVgwRunningTblVgwId Integer32
  hwSipVgwRunningMediaIPAddress IpAddress
  hwSipVgwRunningSigIPAddress IpAddress
  hwSipVgwRunningSigPort Integer32
  hwSipVgwRunningProxyIPAddress IpAddress
  hwSipVgwRunningProxyPort Integer32
  hwSipVgwRunningTransMode INTEGER
  hwSipVgwRunningDomainName OCTET STRING
  hwSipVgwRunningProxyDomainName OCTET STRING
  hwSipVgwRunningHomeDomainName OCTET STRING
  hwSipVgwRunningRegisterURI OCTET STRING
  hwSipVgwRunningConferenceFactoryURI OCTET STRING
  hwSipVgwRunningDesc OCTET STRING
  hwSipVgwRunningPhoneContext OCTET STRING
  hwSipVgwRunningProfileIndex Integer32
  hwSipVgwRunningProfileName OCTET STRING
  hwSipVgwRunningProxyIPAddress2 IpAddress
  hwSipVgwRunningProxyPort2 Integer32
  hwSipVgwProxy1OperStatus INTEGER
  hwSipVgwProxy2OperStatus INTEGER
  hwSipVgwRunningAuthUserName OCTET STRING
  hwSipVgwRunningAuthPassword OCTET STRING
  hwSipVgwRunningSrvLogicName OCTET STRING
  hwSipVgwRunningServerDhcpOption INTEGER
  hwSipVgwRunningMediaAddrName OCTET STRING
  hwSipVgwRunningSignalAddrName OCTET STRING
  hwSipVgwRunningAuthPasswordMode INTEGER
  hwSipVgwRunningAuthHA1 OCTET STRING
  hwSipVgwRunningAuthMode INTEGER
  hwSipVgwRunningSubUAProfile INTEGER
  hwSipVgwRunningSubRegState INTEGER
  hwSipVgwRunningSubMwi INTEGER
  hwSipVgwRunningSdpNegoMode INTEGER
  hwSipVgwRunningProxyDualHome INTEGER
  hwSipVgwRunningProxyCheckMode INTEGER
  hwSipVgwRunningProxyRefreshMode INTEGER
  hwSipVgwRunningCurrentProxy INTEGER
  hwSipVgwRunningKeepActiveFlag INTEGER
  hwSipVgwRunningKeepActivePeriod Integer32
  hwSipVgwRunningRegMode INTEGER

HwSipProfileSupportEntry  
SEQUENCE    
  hwSipProfileIndex Integer32
  hwSipProfileName OCTET STRING

HwVGWProxyConfigEntry  
SEQUENCE    
  hwSipVgwConfigId Integer32
  hwSipVgwConfigProxyIndex Integer32
  hwSipVgwConfigProxyIPAddress1 IpAddress
  hwSipVgwConfigProxyIPAddress2 IpAddress
  hwSipVgwConfigProxyPort Integer32
  hwSipVgwConfigProxyDomainName OCTET STRING
  hwSipVgwConfigProxyAddressMode Integer32

HwVGWProxyRunningEntry  
SEQUENCE    
  hwSipVgwRunningId Integer32
  hwSipVgwProxyRunningIndex Integer32
  hwSipVgwProxyRunningIPAddress1 IpAddress
  hwSipVgwProxyRunningIPAddress2 IpAddress
  hwSipVgwProxyRunningPort Integer32
  hwSipVgwProxyRunningDomainName OCTET STRING
  hwSipVgwProxyRunningAddressMode Integer32
  hwSipVgwProxyRunningState Integer32

HwSipSrvLogicSupportEntry  
SEQUENCE    
  hwSipSrvLogicIndex Integer32
  hwSipSrvLogicName OCTET STRING

HwSipMgSoftParameterEntry  
SEQUENCE    
  hwSipMgInterfaceIndex Integer32
  hwSipMgSoftParameter0 INTEGER
  hwSipMgSoftParameter1 INTEGER
  hwSipMgSoftParameter2 INTEGER
  hwSipMgSoftParameter3 INTEGER
  hwSipMgSoftParameter4 INTEGER
  hwSipMgSoftParameter5 INTEGER
  hwSipMgSoftParameter6 INTEGER
  hwSipMgSoftParameter7 INTEGER
  hwSipMgSoftParameter8 INTEGER
  hwSipMgSoftParameter9 INTEGER
  hwSipMgSoftParameter10 INTEGER
  hwSipMgSoftParameter11 INTEGER
  hwSipMgSoftParameter12 INTEGER
  hwSipMgSoftParameter13 INTEGER
  hwSipMgSoftParameter14 INTEGER
  hwSipMgSoftParameter15 INTEGER
  hwSipMgSoftParameter16 INTEGER
  hwSipMgSoftParameter17 INTEGER
  hwSipMgSoftParameter18 INTEGER
  hwSipMgSoftParameter19 INTEGER
  hwSipMgSoftParameter20 INTEGER
  hwSipMgSoftParameter21 INTEGER
  hwSipMgSoftParameter22 INTEGER
  hwSipMgSoftParameter23 Integer32
  hwSipMgSoftParameter24 INTEGER
  hwSipMgSoftParameter25 INTEGER
  hwSipMgSoftParameter26 Integer32
  hwSipMgSoftParameter27 Integer32
  hwSipMgSoftParameter28 INTEGER
  hwSipMgSoftParameter29 Integer32

HwSipDmmParaEntry  
SEQUENCE    
  hwSipDmmParaMgId Unsigned32
  hwSipDmmParaStartTimer Unsigned32
  hwSipDmmParaShortTimer Unsigned32
  hwSipDmmParaLongTimer Unsigned32

HwVoiceUserGroupConfigEntry  
SEQUENCE    
  hwSipUserGroupVgwId Integer32
  hwSipUserGroupid Integer32
  hwSipUserGroupRegisterUriMode INTEGER
  hwSipUserGroupUri OCTET STRING
  hwSipUserGroupName OCTET STRING
  hwSipUserGroupAuthUserName OCTET STRING
  hwSipUserGroupAuthPassWordMode INTEGER
  hwSipUserGroupAuthPassword OCTET STRING
  hwSipUserGroupAuthHA1 OCTET STRING
  hwSipUserGroupPrecinctMode INTEGER
  hwSipUserGroupSubscribeUaProfileFlag INTEGER
  hwSipUserGroupRowStatus RowStatus
  hwSipUserGroupAdminStatus INTEGER
  hwSipUserGroupRunningState INTEGER

HwSipMgSoftStringParameterConfigEntry  
SEQUENCE    
  hwSipMgSoftStringMgInterfaceIndexConfig Integer32
  hwSipMgSoftStringConfigParameter0 OCTET STRING
  hwSipMgSoftStringConfigParameter1 OCTET STRING
  hwSipMgSoftStringConfigParameter2 OCTET STRING
  hwSipMgSoftStringConfigParameter3 OCTET STRING
  hwSipMgSoftStringConfigParameter4 OCTET STRING
  hwSipMgSoftStringConfigParameter5 OCTET STRING
  hwSipMgSoftStringConfigParameter6 OCTET STRING
  hwSipMgSoftStringConfigParameter7 OCTET STRING
  hwSipMgSoftStringConfigParameter8 OCTET STRING
  hwSipMgSoftStringConfigParameter9 OCTET STRING
  hwSipMgSoftStringConfigParameter10 OCTET STRING
  hwSipMgSoftStringConfigParameter11 OCTET STRING
  hwSipMgSoftStringConfigParameter12 OCTET STRING
  hwSipMgSoftStringConfigParameter13 OCTET STRING
  hwSipMgSoftStringConfigParameter14 OCTET STRING
  hwSipMgSoftStringConfigParameter15 OCTET STRING
  hwSipMgSoftStringConfigParameter16 OCTET STRING
  hwSipMgSoftStringConfigParameter17 OCTET STRING
  hwSipMgSoftStringConfigParameter18 OCTET STRING
  hwSipMgSoftStringConfigParameter19 OCTET STRING
  hwSipMgSoftStringConfigParameter20 OCTET STRING
  hwSipMgSoftStringConfigParameter21 OCTET STRING
  hwSipMgSoftStringConfigParameter22 OCTET STRING
  hwSipMgSoftStringConfigParameter23 OCTET STRING
  hwSipMgSoftStringConfigParameter24 OCTET STRING
  hwSipMgSoftStringConfigParameter25 OCTET STRING
  hwSipMgSoftStringConfigParameter26 OCTET STRING
  hwSipMgSoftStringConfigParameter27 OCTET STRING
  hwSipMgSoftStringConfigParameter28 OCTET STRING
  hwSipMgSoftStringConfigParameter29 OCTET STRING
  hwSipMgSoftStringConfigParameter30 OCTET STRING
  hwSipMgSoftStringConfigParameter31 OCTET STRING
  hwSipMgSoftStringConfigParameter32 OCTET STRING
  hwSipMgSoftStringConfigParameter33 OCTET STRING
  hwSipMgSoftStringConfigParameter34 OCTET STRING
  hwSipMgSoftStringConfigParameter35 OCTET STRING
  hwSipMgSoftStringConfigParameter36 OCTET STRING
  hwSipMgSoftStringConfigParameter37 OCTET STRING
  hwSipMgSoftStringConfigParameter38 OCTET STRING
  hwSipMgSoftStringConfigParameter39 OCTET STRING
  hwSipMgSoftStringConfigParameter40 OCTET STRING
  hwSipMgSoftStringConfigParameter41 OCTET STRING
  hwSipMgSoftStringConfigParameter42 OCTET STRING

HwSipMgSoftStringParameterRunningEntry  
SEQUENCE    
  hwSipMgSoftStringMgInterfaceIndexRunning Integer32
  hwSipMgSoftStringRunningParameter0 OCTET STRING
  hwSipMgSoftStringRunningParameter1 OCTET STRING
  hwSipMgSoftStringRunningParameter2 OCTET STRING
  hwSipMgSoftStringRunningParameter3 OCTET STRING
  hwSipMgSoftStringRunningParameter4 OCTET STRING
  hwSipMgSoftStringRunningParameter5 OCTET STRING
  hwSipMgSoftStringRunningParameter6 OCTET STRING
  hwSipMgSoftStringRunningParameter7 OCTET STRING
  hwSipMgSoftStringRunningParameter8 OCTET STRING
  hwSipMgSoftStringRunningParameter9 OCTET STRING
  hwSipMgSoftStringRunningParameter10 OCTET STRING
  hwSipMgSoftStringRunningParameter11 OCTET STRING
  hwSipMgSoftStringRunningParameter12 OCTET STRING
  hwSipMgSoftStringRunningParameter13 OCTET STRING
  hwSipMgSoftStringRunningParameter14 OCTET STRING
  hwSipMgSoftStringRunningParameter15 OCTET STRING
  hwSipMgSoftStringRunningParameter16 OCTET STRING
  hwSipMgSoftStringRunningParameter17 OCTET STRING
  hwSipMgSoftStringRunningParameter18 OCTET STRING
  hwSipMgSoftStringRunningParameter19 OCTET STRING
  hwSipMgSoftStringRunningParameter20 OCTET STRING
  hwSipMgSoftStringRunningParameter21 OCTET STRING
  hwSipMgSoftStringRunningParameter22 OCTET STRING
  hwSipMgSoftStringRunningParameter23 OCTET STRING
  hwSipMgSoftStringRunningParameter24 OCTET STRING
  hwSipMgSoftStringRunningParameter25 OCTET STRING
  hwSipMgSoftStringRunningParameter26 OCTET STRING
  hwSipMgSoftStringRunningParameter27 OCTET STRING
  hwSipMgSoftStringRunningParameter28 OCTET STRING
  hwSipMgSoftStringRunningParameter29 OCTET STRING
  hwSipMgSoftStringRunningParameter30 OCTET STRING
  hwSipMgSoftStringRunningParameter31 OCTET STRING
  hwSipMgSoftStringRunningParameter32 OCTET STRING
  hwSipMgSoftStringRunningParameter33 OCTET STRING
  hwSipMgSoftStringRunningParameter34 OCTET STRING
  hwSipMgSoftStringRunningParameter35 OCTET STRING
  hwSipMgSoftStringRunningParameter36 OCTET STRING
  hwSipMgSoftStringRunningParameter37 OCTET STRING
  hwSipMgSoftStringRunningParameter38 OCTET STRING
  hwSipMgSoftStringRunningParameter39 OCTET STRING
  hwSipMgSoftStringRunningParameter40 OCTET STRING
  hwSipMgSoftStringRunningParameter41 OCTET STRING
  hwSipMgSoftStringRunningParameter42 OCTET STRING

HwVGWDigitMapGroupRefEntry  
SEQUENCE    
  hwVGWDigitMapGroupInterfaceID Integer32
  hwVGWDigitMapGroupName OCTET STRING

HwVGWISDNCauseResponseMapEntry  
SEQUENCE    
  hwIsdnCauseMapMgId Integer32
  hwIsdnCauseMapCause Integer32
  hwIsdnCauseMapSipResponse Integer32
  hwIsdnCauseMapRowStatus RowStatus

HwVGWSIPResponseCauseMapEntry  
SEQUENCE    
  hwSipResponseMapMgId Integer32
  hwSipResponseMapResponse Integer32
  hwSipResponseMapIsdnCause Integer32
  hwSipResponseMapRowStatus RowStatus

HwVGWSIPResponseCauseMapRunningEntry  
SEQUENCE    
  hwSipResponseMaprunningMgId Integer32
  hwSipResponseMaprunningResponse Integer32
  hwSipResponseMaprunningIsdnCause Integer32

HwVGWISDNCauseResponseMapRunningEntry  
SEQUENCE    
  hwIsdnCauseMaprunningMgId Integer32
  hwIsdnCauseMaprunningCause Integer32
  hwIsdnCauseMaprunningSipResponse Integer32

HwSipHuntingGroupEntry  
SEQUENCE    
  hwSipHGVgwId Integer32
  hwSipHGName OCTET STRING
  hwSipHGHuntingMode INTEGER
  hwSipHGInheritFlag INTEGER
  hwSipHGRowStatus RowStatus

HwSipHuntingGroupMemberEntry  
SEQUENCE    
  hwSipHGMemberGroupName OCTET STRING
  hwSipHGMemberPortIndex Unsigned32
  hwSipHGMemberSubGroupName OCTET STRING
  hwSipHGMemberOrder Integer32
  hwSipHGMemberRowStatus RowStatus

HwSipGroupNumberConfigEntry  
SEQUENCE    
  hwSipGroupNumberVgwId Integer32
  hwSipGroupNumberUri OCTET STRING
  hwSipGroupNumberGroupName OCTET STRING
  hwSipGroupNumberRowStatus RowStatus

HwSipGroupNumberOperEntry  
SEQUENCE    
  hwSipGroupNumberOperVgwId Integer32
  hwSipGroupNumberOperUri OCTET STRING
  hwSipGroupNumberAdminState INTEGER
  hwSipGroupNumberOperType INTEGER

HwSipGroupNumberRightEntry  
SEQUENCE    
  hwSipGroupNumberRightVgwId Integer32
  hwSipGroupNumberRightUri OCTET STRING
  hwSipGroupNumberRightCentrexNo Unsigned32
  hwSipGroupNumberRightCentrexPrefix OCTET STRING
  hwSipGroupNumberRightCentrexFlag INTEGER
  hwSipGroupNumberRightCallHold INTEGER
  hwSipGroupNumberRightThreeParty INTEGER
  hwSipGroupNumberRightConf INTEGER
  hwSipGroupNumberRightCt INTEGER
  hwSipGroupNumberRightMcid INTEGER
  hwSipGroupNumberRightAuthName OCTET STRING
  hwSipGroupNumberRightAuthPasswordMode INTEGER
  hwSipGroupNumberRightAuthPassword OCTET STRING
  hwSipGroupNumberRightAuthHA1 OCTET STRING
  hwSipGroupNumberRightCw INTEGER
  hwSipGroupNumberRightDc INTEGER
  hwSipGroupNumberRightMwi INTEGER
  hwSipGroupNumberRightAnonymousCall INTEGER
  hwSipGroupNumberRightAutoReversePolarity INTEGER
  hwSipGroupNumberRightDisplayNameMode INTEGER
  hwSipGroupNumberRightPermanentHold INTEGER
  hwSipGroupNumberRightCutoffDisconnect INTEGER
  hwSipGroupNumberRightSccClass INTEGER
  hwSipGroupNumberRightFastDisconnect INTEGER
  hwSipGroupNumberRightHotLine INTEGER
  hwSipGroupNumberRightMwiMode INTEGER
  hwSipGroupNumberRightHotTime Integer32
  hwSipGroupNumberRightHotLineNum OCTET STRING
  hwSipGroupNumberRightDialTone INTEGER
  hwSipGroupNumberRightCfbNum OCTET STRING
  hwSipGroupNumberRightCfnrNum OCTET STRING
  hwSipGroupNumberRightCfuNum OCTET STRING
  hwSipGroupNumberRightCfnrTime Integer32
  hwSipGroupNumberRightDisplayName OCTET STRING
  hwSipGroupNumberRightPermanentHoldMode INTEGER
  hwSipGroupNumberRightPermanentHoldTime Integer32

HwSipRingParallelGroupEntry  
SEQUENCE    
  hwSipRPGVgwId Integer32
  hwSipRPGName OCTET STRING
  hwSipRPGSelectMode INTEGER
  hwSipRPGRowStatus RowStatus

HwSipRingParallelGroupMemberEntry  
SEQUENCE    
  hwSipRPGMemberGroupName OCTET STRING
  hwSipRPGMemberPortIndex Unsigned32
  hwSipRPGMemberRowStatus RowStatus

HwVGWLoadsharingRunningEntry  
SEQUENCE    
  hwVGWLoadsharingRunningVgwId Integer32
  hwVGWLoadsharingRunningAddressIndex Integer32
  hwVGWLoadsharingRunningIpAddress IpAddress
  hwVGWLoadsharingRunningPort Integer32

Defined Values

hwVoip 1.3.6.1.4.1.2011.6.36
This mib is used for defining huawei's SIP MIB objects, which provides SIP management.
MODULE-IDENTITY    

hwIASVoipAlarmOids 1.3.6.1.4.1.2011.6.36.2.1
OBJECT IDENTIFIER    

hwIASVoipAlarmTraps 1.3.6.1.4.1.2011.6.36.2.0
OBJECT IDENTIFIER    

hwIASVoipObjects 1.3.6.1.4.1.2011.6.36.1
OBJECT IDENTIFIER    

hwIASVoipTraps 1.3.6.1.4.1.2011.6.36.2
OBJECT IDENTIFIER    

hwVoipSipObjects 1.3.6.1.4.1.2011.6.36.1.70
OBJECT IDENTIFIER    

hwIASSipTrapsVbOids 1.3.6.1.4.1.2011.6.36.7
OBJECT IDENTIFIER    

hwIASSipTraps 1.3.6.1.4.1.2011.6.36.8
OBJECT IDENTIFIER    

hwIASSipCommonTraps 1.3.6.1.4.1.2011.6.36.8.1
OBJECT IDENTIFIER    

hwIASSipAlarmTraps 1.3.6.1.4.1.2011.6.36.8.2
OBJECT IDENTIFIER    

hwVGWConfigTable 1.3.6.1.4.1.2011.6.36.1.70.1
This table is used to config the parameters of SipVgw. The index of this table is hwSipVgwId.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwVGWConfigEntry

hwVGWConfigEntry 1.3.6.1.4.1.2011.6.36.1.70.1.1
This table is used to config the parameters of SipVgw. The index of this entry is hwSipVgwId.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwVGWConfigEntry  

hwSipVgwId 1.3.6.1.4.1.2011.6.36.1.70.1.1.1
SIP GateWay ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..16777215  

hwSipVgwMediaIPAddress 1.3.6.1.4.1.2011.6.36.1.70.1.1.2
Indicates the MediaIPAddress of SipVgw.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwSipVgwSigIPAddress 1.3.6.1.4.1.2011.6.36.1.70.1.1.3
Indicates the SigIPAddress of SipVgw.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwSipVgwSigPort 1.3.6.1.4.1.2011.6.36.1.70.1.1.4
Indicates the SigPort of SipVgw. 65535 means this parameter is not configurated.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 5000..5999 | 65535  

hwSipVgwProxyIPAddress 1.3.6.1.4.1.2011.6.36.1.70.1.1.5
Indicates the Master Proxy IP of SipVgw.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwSipVgwProxyPort 1.3.6.1.4.1.2011.6.36.1.70.1.1.6
Indicates the Master ProxyPort of SipVgw.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

hwSipVgwTransMode 1.3.6.1.4.1.2011.6.36.1.70.1.1.7
Indicates the TransMode of SipVgw. Options: 1. tcp(1) -TCP 2. udp(2) -UDP 3. sctp(3) -SCTP 4. tls(4) -TLS
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER tcp(1), udp(2), sctp(3), tls(4)  

hwSipVgwDomainName 1.3.6.1.4.1.2011.6.36.1.70.1.1.8
Indicates the DomainName of SipVgw.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipVgwProxyDomainName 1.3.6.1.4.1.2011.6.36.1.70.1.1.9
Indicates the ProxyDomainName of SipVgw.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipVgwHomeDomainName 1.3.6.1.4.1.2011.6.36.1.70.1.1.10
Indicates the HomeDomainName of SipVgw.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipVgwRegisterURI 1.3.6.1.4.1.2011.6.36.1.70.1.1.11
Indicates the Register-URI of SipVgw.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipVgwConferenceFactoryURI 1.3.6.1.4.1.2011.6.36.1.70.1.1.12
Indicates the ConferenceFactory-URI of SipVgw.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipVgwDesc 1.3.6.1.4.1.2011.6.36.1.70.1.1.13
Indicates the Description of SipVgw.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

hwSipVgwPhoneContext 1.3.6.1.4.1.2011.6.36.1.70.1.1.14
Indicates the PhoneContext of SipVgw.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

hwSipVgwAdminStatus 1.3.6.1.4.1.2011.6.36.1.70.1.1.15
Indicates the AdminStatus of SipVgw. Options: 1. reset(1) -reset 2. switchover(2) -switchover
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER reset(1), switchover(2)  

hwSipVgwRowStatus 1.3.6.1.4.1.2011.6.36.1.70.1.1.16
This is used to create new rows in this table, modify existing rows, and delete existing rows.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwSipVgwProfileIndex 1.3.6.1.4.1.2011.6.36.1.70.1.1.17
Indicates the ProfileIndex of SipVgw.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..254  

hwSipVgwProfileName 1.3.6.1.4.1.2011.6.36.1.70.1.1.18
Indicates the ProfileName of SipVgw.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..67)  

hwSipVgwProxyIPAddress2 1.3.6.1.4.1.2011.6.36.1.70.1.1.19
Indicates the Slaver ProxyIPAddress of SipVgw.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwSipVgwProxyPort2 1.3.6.1.4.1.2011.6.36.1.70.1.1.20
Indicates the Slaver ProxyPort of SipVgw.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

hwSipVgwAuthUserName 1.3.6.1.4.1.2011.6.36.1.70.1.1.21
Indicates the Auth Username of SipVgw.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipVgwAuthPassword 1.3.6.1.4.1.2011.6.36.1.70.1.1.22
Indicates the Auth Password of SipVgw.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipVgwMediaIPAddrDhcpClientIndex 1.3.6.1.4.1.2011.6.36.1.70.1.1.23
Dhcp Media vlan id. The valid value is 1..4093, if the value is -1, the static media ip will be used.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4093 | -1  

hwSipVgwSigIPAddrDhcpClientIndex 1.3.6.1.4.1.2011.6.36.1.70.1.1.24
Dhcp Signal vlan id. The valid value is 1..4093, if the value is -1, the static signal ip will be used.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4093 | -1  

hwSipVgwSrvLogicName 1.3.6.1.4.1.2011.6.36.1.70.1.1.25
Indicates the ServeLogicName of SipVgw.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..67)  

hwSipVgwServerDhcpOption 1.1.3.6.1.4.1.2011.6.36.1.70.1.1.26
Indicates the DHCP option of SipVgw. Options: 1. none(1) -none 2. option120(2) -option120 3. option21(3) -option21
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), option120(2), option21(3)  

hwSipVgwSwitchoverDestination 1.3.6.1.4.1.2011.6.36.1.70.1.1.27
Indicates the target proxy of switchover. Options: 1. primary(1) -primary proxy 2. secondary(2) -secondary proxy
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER primary(1), secondary(2)  

hwSipVgwMediaAddrName 1.3.6.1.4.1.2011.6.36.1.70.1.1.28
Dynamic media IP name.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipVgwSignalAddrName 1.3.6.1.4.1.2011.6.36.1.70.1.1.29
Dynamic signal IP name.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipVgwAuthPasswordMode 1.1.3.6.1.4.1.2011.6.36.1.70.1.1.30
Auth Password mode. Options: 1. password(1) -auth by password 2. ha1(2) -auth by ha1
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER password(1), ha1(2)  

hwSipVgwAuthHA1 1.3.6.1.4.1.2011.6.36.1.70.1.1.31
Indicates the Auth HA1 of SipVgw.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

hwSipVgwAuthMode 2.1.3.6.1.4.1.2011.6.36.1.70.1.1.32
Indicates the user authentication mode of SipVgw. Options: 1. interface(1) -interface 2. singleuser(2) -single user
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER interface(1), singleuser(2)  

hwSipVgwSubUAProfile 1.1.3.6.1.4.1.2011.6.36.1.70.1.1.33
Indicates subscribe to UA-Profile. Options: 1. enable(1) -enable 2. disable(2) -disable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwSipVgwSubRegState 2.1.3.6.1.4.1.2011.6.36.1.70.1.1.34
Indicates subscribe to REG-STATE. Options: 1. enable(1) -enable 2. disable(2) -disable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwSipVgwSubMwi 2.1.3.6.1.4.1.2011.6.36.1.70.1.1.35
Indicates subscribe to MWI. Options: 1. enable(1) -enable 2. disable(2) -disable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwSipVgwSdpNegoMode 2.1.3.6.1.4.1.2011.6.36.1.70.1.1.36
Indicates SDP negotiation mode. Options: 1. local(1) -Local end takes priority when codec negotiation 2. remote(2) -Remote end takes priority when codec negotiation
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER local(1), remote(2)  

hwSipVgwProxyDualHome 2.1.3.6.1.4.1.2011.6.36.1.70.1.1.37
Indicate mode of supporting proxy homing. Options: 1. no(1) -not support proxy multi-homing 2. dualhome(2) -support proxy dual-homing, but does not support auto-switchover 3. autoswitchover(3) -support proxy dual-homing and auto-switchover 4. loadsharing(4) -support proxy load sharing
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(1), dualhome(2), autoswitchover(3), loadsharing(4)  

hwSipVgwProxyCheckMode 2.1.3.6.1.4.1.2011.6.36.1.70.1.1.38
Indicate proxy detection mode. Options: 1. option(1) -detect proxy by option message 2. probe(2) -detect proxy by probe mode 3. register(3) -detect proxy by register message
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER option(1), probe(2), register(3)  

hwSipVgwProxyRefreshMode 1.3.6.1.4.1.2011.6.36.1.70.1.1.39
Indicate Proxy address refresh mode. Options: 1. immediate(1) -immediate switch 2. defer(2) -switch in no calls cases 3. no-switch(3) -no switch 4. null(-1) -invalid value When the proxy homing mode is load sharing, parameters defer(2) and no-switch(3) do not take effect.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER immediate(1), defer(2), no-switch(3), null(-1)  

hwSipVgwKeepActiveFlag 2.1.3.6.1.4.1.2011.6.36.1.70.1.1.40
The switch for transfer connect regular renovate. Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwSipVgwKeepActivePeriod 1.3.6.1.4.1.2011.6.36.1.70.1.1.41
Indicates the configured period of transfer connect regular renovate. Unit: second Default:30
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..3600  

hwSipVgwRegMode 1.1.3.6.1.4.1.2011.6.36.1.70.1.1.42
The register mode of the sip user and account. Options: 1. single(1) -single 2. wildcard(2) -wildcard Default: single(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER single(1), wildcard(2)  

hwVGWRunningTable 1.3.6.1.4.1.2011.6.36.1.70.2
This table is used to query the running parameters of SipVgw. The index of this table is hwSipVgwRunningTblVgwId.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwVGWRunningEntry

hwVGWRunningEntry 1.3.6.1.4.1.2011.6.36.1.70.2.1
This table is used to query the running parameters of SipVgw. The index of this entry is hwSipVgwRunningTblVgwId.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwVGWRunningEntry  

hwSipVgwRunningTblVgwId 1.3.6.1.4.1.2011.6.36.1.70.2.1.1
SIP GateWay ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..16777215  

hwSipVgwRunningMediaIPAddress 1.3.6.1.4.1.2011.6.36.1.70.2.1.2
Indicates the MediaIPAddress of SipVgw.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwSipVgwRunningSigIPAddress 1.3.6.1.4.1.2011.6.36.1.70.2.1.3
Indicates the SigIPAddress of SipVgw.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwSipVgwRunningSigPort 1.3.6.1.4.1.2011.6.36.1.70.2.1.4
Indicates the SigPort of SipVgw. 65535 means the interface is not started.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 5000..5999 | 65535  

hwSipVgwRunningProxyIPAddress 1.3.6.1.4.1.2011.6.36.1.70.2.1.5
Indicates the Master Proxy IP of SipVgw.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwSipVgwRunningProxyPort 1.3.6.1.4.1.2011.6.36.1.70.2.1.6
Indicates the Master ProxyPort of SipVgw.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

hwSipVgwRunningTransMode 1.3.6.1.4.1.2011.6.36.1.70.2.1.7
Indicates the TransMode of SipVgw. null(255) means the interface is not started. Options: 1. tcp(1) -TCP 2. udp(2) -UDP 3. sctp(3) -SCTP 4. tls(4) -TLS 5. null(255) -interface is not started
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER tcp(1), udp(2), sctp(3), tls(4), null(255)  

hwSipVgwRunningDomainName 1.3.6.1.4.1.2011.6.36.1.70.2.1.8
Indicates the DomainName of SipVgw.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipVgwRunningProxyDomainName 1.3.6.1.4.1.2011.6.36.1.70.2.1.9
Indicates the ProxyDomainName of SipVgw.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipVgwRunningHomeDomainName 1.3.6.1.4.1.2011.6.36.1.70.2.1.10
Indicates the HomeDomainName of SipVgw.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipVgwRunningRegisterURI 1.3.6.1.4.1.2011.6.36.1.70.2.1.11
Indicates the Register-URI of SipVgw.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipVgwRunningConferenceFactoryURI 1.3.6.1.4.1.2011.6.36.1.70.2.1.12
Indicates the ConferenceFactory-URI of SipVgw.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipVgwRunningDesc 1.3.6.1.4.1.2011.6.36.1.70.2.1.13
Indicates the Description of SipVgw.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

hwSipVgwRunningPhoneContext 1.3.6.1.4.1.2011.6.36.1.70.2.1.14
Indicates the PhoneContext of SipVgw.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

hwSipVgwRunningProfileIndex 1.3.6.1.4.1.2011.6.36.1.70.2.1.15
Indicates the ProfileIndex of SipVgw.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..254  

hwSipVgwRunningProfileName 1.3.6.1.4.1.2011.6.36.1.70.2.1.16
Indicates the ProfileName of SipVgw.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..67)  

hwSipVgwRunningProxyIPAddress2 1.3.6.1.4.1.2011.6.36.1.70.2.1.17
Indicates the Slaver ProxyIPAddress of SipVgw.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwSipVgwRunningProxyPort2 1.3.6.1.4.1.2011.6.36.1.70.2.1.18
Indicates the Slaver ProxyPort of SipVgw.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

hwSipVgwProxy1OperStatus 1.3.6.1.4.1.2011.6.36.1.70.2.1.19
Indicates the Master OperStatus of SipVgw. Options: 1. up(1) -normal 2. down(2) -fault 3. unknown(3) -unknown
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), unknown(3)  

hwSipVgwProxy2OperStatus 1.3.6.1.4.1.2011.6.36.1.70.2.1.20
Indicates the Slaver OperStatus of SipVgw. Options: 1. up(1) -normal 2. down(2) -fault 3. unknown(3) -unknown
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), unknown(3)  

hwSipVgwRunningAuthUserName 1.3.6.1.4.1.2011.6.36.1.70.2.1.21
Indicates the Auth Username of SipVgw.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipVgwRunningAuthPassword 1.3.6.1.4.1.2011.6.36.1.70.2.1.22
Indicates the Auth Password of SipVgw.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipVgwRunningSrvLogicName 1.3.6.1.4.1.2011.6.36.1.70.2.1.23
Indicates the ServeLogicName of SipVgw.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..67)  

hwSipVgwRunningServerDhcpOption 1.3.6.1.4.1.2011.6.36.1.70.2.1.24
Indicates the DHCP option of SipVgw. Options: 1. none(1) -none 2. option120(2) -option120 3. option21(3) -option21 Default: none(1)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), option120(2), option21(3)  

hwSipVgwRunningMediaAddrName 1.3.6.1.4.1.2011.6.36.1.70.2.1.25
Indicates the current dynamic media IP name of SipVgw.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipVgwRunningSignalAddrName 1.3.6.1.4.1.2011.6.36.1.70.2.1.26
Indicates the current dynamic signal IP name of SipVgw.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipVgwRunningAuthPasswordMode 1.3.6.1.4.1.2011.6.36.1.70.2.1.27
Auth Password mode. Options: 1. password(1) -password 2. ha1(2) -HA1
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER password(1), ha1(2)  

hwSipVgwRunningAuthHA1 1.3.6.1.4.1.2011.6.36.1.70.2.1.28
Auth HA1.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

hwSipVgwRunningAuthMode 1.3.6.1.4.1.2011.6.36.1.70.2.1.29
Indicates user authentication mode of SipVgw. Options: 1. interface(1) -interface 2. singleuser(2) -single user
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER interface(1), singleuser(2)  

hwSipVgwRunningSubUAProfile 1.3.6.1.4.1.2011.6.36.1.70.2.1.30
Indicates subscribe to UA-Profile. Options: 1. enable(1) -enable 2. disable(2) -disable
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwSipVgwRunningSubRegState 1.3.6.1.4.1.2011.6.36.1.70.2.1.31
Indicates subscribe to REG-STATE. Options: 1. enable(1) -enable 2. disable(2) -disable
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwSipVgwRunningSubMwi 1.3.6.1.4.1.2011.6.36.1.70.2.1.32
Indicates subscribe to MWI. Options: 1. enable(1) -enable 2. disable(2) -disable
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwSipVgwRunningSdpNegoMode 1.3.6.1.4.1.2011.6.36.1.70.2.1.33
Indicates SDP negotiation mode of SipVgw. Options: 1. local(1) -local first 2. remote(2) -remote first
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER local(1), remote(2)  

hwSipVgwRunningProxyDualHome 1.3.6.1.4.1.2011.6.36.1.70.2.1.34
Indicate mode of supporting proxy homing of SipVgw. Options: 1. no(1) -not support proxy multi-homing 2. dualhome(2) -support proxy dual-homing, but does not support auto-switchover 3. autoswitchover(3) -support proxy dual-homing and auto-switchover 4. loadsharing(4) -support proxy load sharing
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER no(1), dualhome(2), autoswitchover(3), loadsharing(4)  

hwSipVgwRunningProxyCheckMode 1.3.6.1.4.1.2011.6.36.1.70.2.1.35
Indicate proxy detection mode. Options: 1. option(1) -detection proxy by option message 2. probe(2) -detection proxy by probe mode 3. register(3) -detection proxy by register message
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER option(1), probe(2), register(3)  

hwSipVgwRunningProxyRefreshMode 1.3.6.1.4.1.2011.6.36.1.70.2.1.36
Indicate Proxy address refresh mode. Options: 1. immediate(1) -immediate switch 2. defer(2) -switch in no calls cases 3. no-switch(3) -no switch When the proxy homing mode is load sharing, parameters defer(2) and no-switch(3) do not take effect.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER immediate(1), defer(2), no-switch(3)  

hwSipVgwRunningCurrentProxy 1.3.6.1.4.1.2011.6.36.1.70.2.1.37
Indicate Current Proxy. Options: 1. primary-proxy(1) -primary proxy 2. secondary-proxy(2) -secondary proxy 3. null(-1) -invalid value
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER primary-proxy(1), secondary-proxy(2), null(-1)  

hwSipVgwRunningKeepActiveFlag 1.3.6.1.4.1.2011.6.36.1.70.2.1.38
Indicates the switch for transfer connect regular renovate. Options: 1. enable(1) -enable 2. disable(2) -disable
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwSipVgwRunningKeepActivePeriod 1.3.6.1.4.1.2011.6.36.1.70.2.1.39
Indicates the configured period of transfer connect regular renovate. Unit: second
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..3600  

hwSipVgwRunningRegMode 1.3.6.1.4.1.2011.6.36.1.70.2.1.40
Indicates register mode of sip user and account. Options: 1. single(1) -single 2. wildcard(2) -wildcard
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER single(1), wildcard(2)  

hwSipstackParametersTable 1.3.6.1.4.1.2011.6.36.1.70.3
OBJECT IDENTIFIER    

hwSipstackParaServer 1.3.6.1.4.1.2011.6.36.1.70.3.1
The head-field of Server.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipstackParaOrganization 1.3.6.1.4.1.2011.6.36.1.70.3.2
The head-field of Organization.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipstackParaUserAgent 1.3.6.1.4.1.2011.6.36.1.70.3.3
The head-field of UserAgent.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipstackParaMaxForwards 1.3.6.1.4.1.2011.6.36.1.70.3.4
The MaxForwards parameter of SipStack. Default: 70
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..255  

hwSipstackParaT1 1.3.6.1.4.1.2011.6.36.1.70.3.5
The T1 timer(Round-Trip timer) of SipStack. Default: 500 Unit: ms
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 200..10000  

hwSipstackParaT2 1.3.6.1.4.1.2011.6.36.1.70.3.6
The T2 timer of SipStack(The maximum length of retransmission for non-invite request or invite response). Default: 4000 Unit: millisecond
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 200..10000  

hwSipstackParaT4 1.3.6.1.4.1.2011.6.36.1.70.3.7
The T4 timer of SipStack(The maximum length of message transmission in the network). Default: 5000 Unit: millisecond
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 200..10000  

hwSipstackParaTD 1.3.6.1.4.1.2011.6.36.1.70.3.8
The D timer of SipStack(The maximum length of message retransmission for getting a response). Default: 32000 Unit: millisecond
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..300000  

hwSipstackParaMinSE 1.3.6.1.4.1.2011.6.36.1.70.3.9
The timer for Minimum of Session-Expires. Default: 90 Unit: second
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 90..65535  

hwSipstackParaSessionProgress 1.3.6.1.4.1.2011.6.36.1.70.3.10
The length of retransmission for SessionProgress. Default: 180 Unit: second
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

hwSipstackParaSessionRelProgress 1.3.6.1.4.1.2011.6.36.1.70.3.11
The length of retransmission for SessionRelProgress. Default: 60 Unit: second
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

hwSipstackParaEntityBasedSessionsTimerFlag 1.3.6.1.4.1.2011.6.36.1.70.3.12
This flag indicates that whether the Sessions Timer based on UA-Entity. Options: 1. yes(1) -Sessions Timer based on UA-Entity 2. no(2) -Sessions Timer not based on UA-Entity Default: no(2)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

hwSipstackParaHeaderFoldFlag 1.3.6.1.4.1.2011.6.36.1.70.3.13
The flag indicates that whether the authentication header field is folded. Options: 1. disable(1) -disable 2. enable(2) -enable Default: disable(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwSipstackParaToHeaderStrictCheckFlag 1.3.6.1.4.1.2011.6.36.1.70.3.14
The flag indicates that whether the to header field is strictly checked. Options: 1. disable(1) -disable 2. enable(2) -enable Default: disable(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwSipProfileSupportTable 1.3.6.1.4.1.2011.6.36.1.70.4
This table is used to config the Sip Profile. The index of this table is hwSipProfileIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwSipProfileSupportEntry

hwSipProfileSupportEntry 1.3.6.1.4.1.2011.6.36.1.70.4.1
This table is used to config the Sip Profile. The index of this entry is hwSipProfileIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwSipProfileSupportEntry  

hwSipProfileIndex 1.3.6.1.4.1.2011.6.36.1.70.4.1.1
Indicates the index of SipProfile.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..254  

hwSipProfileName 1.3.6.1.4.1.2011.6.36.1.70.4.1.2
Indicates the Name of SipProfile.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..67)  

hwVGWProxyConfigTable 1.3.6.1.4.1.2011.6.36.1.70.5
This table is used to config the parameters of SipVgw. The indexes of this table are hwSipVgwConfigId, hwSipVgwConfigProxyIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwVGWProxyConfigEntry

hwVGWProxyConfigEntry 1.3.6.1.4.1.2011.6.36.1.70.5.1
This table is used to config the parameters of SipVgw. The indexes of this entry are hwSipVgwConfigId, hwSipVgwConfigProxyIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwVGWProxyConfigEntry  

hwSipVgwConfigId 1.3.6.1.4.1.2011.6.36.1.70.5.1.1
SIP GateWay ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..16777215  

hwSipVgwConfigProxyIndex 1.3.6.1.4.1.2011.6.36.1.70.5.1.2
proxy index. 0 -main 1 -standby
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..1  

hwSipVgwConfigProxyIPAddress1 1.3.6.1.4.1.2011.6.36.1.70.5.1.3
Indicates the first ProxyIPAddress of SipVgw.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwSipVgwConfigProxyIPAddress2 1.3.6.1.4.1.2011.6.36.1.70.5.1.4
Indicates the second ProxyIPAddress of SipVgw.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwSipVgwConfigProxyPort 1.3.6.1.4.1.2011.6.36.1.70.5.1.5
Indicates the ProxyPort of SipVgw.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

hwSipVgwConfigProxyDomainName 1.3.6.1.4.1.2011.6.36.1.70.5.1.6
Indicates the ProxyDomainName of SipVgw.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipVgwConfigProxyAddressMode 1.3.6.1.4.1.2011.6.36.1.70.5.1.7
The proxy address mode. 1 -IP 2 -DNS-A 3 -DNS-SRV 4 -DNS-NAPTR 5 -DNS-SRV-FIRST
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..5  

hwVGWProxyRunningTable 1.3.6.1.4.1.2011.6.36.1.70.6
This table is used to query the config parameters of SipVgw. The indexes of this table are hwSipVgwRunningId, hwSipVgwProxyRunningIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwVGWProxyRunningEntry

hwVGWProxyRunningEntry 1.3.6.1.4.1.2011.6.36.1.70.6.1
This table is used to query the config parameters of SipVgw. The indexes of this entry are hwSipVgwRunningId, hwSipVgwProxyRunningIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwVGWProxyRunningEntry  

hwSipVgwRunningId 1.3.6.1.4.1.2011.6.36.1.70.6.1.1
SIP GateWay ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..16777215  

hwSipVgwProxyRunningIndex 1.3.6.1.4.1.2011.6.36.1.70.6.1.2
Proxy index. 0 -main 1 -standby
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..1  

hwSipVgwProxyRunningIPAddress1 1.3.6.1.4.1.2011.6.36.1.70.6.1.3
Indicates the primary IP address of proxy.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwSipVgwProxyRunningIPAddress2 1.3.6.1.4.1.2011.6.36.1.70.6.1.4
Indicates the secondary IP address of proxy.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwSipVgwProxyRunningPort 1.3.6.1.4.1.2011.6.36.1.70.6.1.5
Indicates the ProxyPort of SipVgw.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

hwSipVgwProxyRunningDomainName 1.3.6.1.4.1.2011.6.36.1.70.6.1.6
Indicates the ProxyDomainName of SipVgw.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipVgwProxyRunningAddressMode 1.3.6.1.4.1.2011.6.36.1.70.6.1.7
The proxy address mode. 1 -IP 2 -DNS-A 3 -DNS-SRV 4 -DNS-NAPTR 5 -DNS-SRV-FIRST
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..5  

hwSipVgwProxyRunningState 1.3.6.1.4.1.2011.6.36.1.70.6.1.8
The proxy state. 1 -up(1) 2 -down(2) 3 -unknown(3) 4 -the interface is not started(-1)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..3 | -1  

hwSipSrvLogicSupportTable 1.3.6.1.4.1.2011.6.36.1.70.7
This table is used to config the Sip Serve-Logic list. The index of this table is hwSipSrvLogicIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwSipSrvLogicSupportEntry

hwSipSrvLogicSupportEntry 1.3.6.1.4.1.2011.6.36.1.70.7.1
This table is used to config the Sip Serve-Logic list. The index of this entry is hwSipSrvLogicIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwSipSrvLogicSupportEntry  

hwSipSrvLogicIndex 1.3.6.1.4.1.2011.6.36.1.70.7.1.1
Indicates the index of SipServeLogic.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..254  

hwSipSrvLogicName 1.3.6.1.4.1.2011.6.36.1.70.7.1.2
Indicates the Name of SipServeLogic
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..67)  

hwSipMgSoftParameterTable 1.3.6.1.4.1.2011.6.36.1.70.8
This table is used to config the soft Parameters of SIP interface. The index of this table is hwSipMgInterfaceIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwSipMgSoftParameterEntry

hwSipMgSoftParameterEntry 1.3.6.1.4.1.2011.6.36.1.70.8.1
This table is used to config the soft Parameters of SIP interface. The index of this entry is hwSipMgInterfaceIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwSipMgSoftParameterEntry  

hwSipMgInterfaceIndex 1.3.6.1.4.1.2011.6.36.1.70.8.1.1
SIP GateWay ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..16777215  

hwSipMgSoftParameter0 1.3.6.1.4.1.2011.6.36.1.70.8.1.2
The SIP MgSoftParameter0. Local Block Tone Type. Options: 1. busy(1) -busy tone 2. congestion(2) -congestion tone 3. mute(3) -mute 4. userdefine1(4) -user define 1 5. userdefine2 (5) -user define 2 Default: busy(1)
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER busy(1), congestion(2), mute(3), userdefine1(4), userdefine2(5)  

hwSipMgSoftParameter1 1.3.6.1.4.1.2011.6.36.1.70.8.1.3
the SIP MgSoftParameter1. Remote Block Tone Type. Options: 1. busy(1) -busy tone 2. congestion(2) -congestion tone 3. mute(3) -mute 4. userdefine1(4) -user define 1 5. userdefine2 (5) -user define 2 Default: busy(1)
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER busy(1), congestion(2), mute(3), userdefine1(4), userdefine2(5)  

hwSipMgSoftParameter2 1.3.6.1.4.1.2011.6.36.1.70.8.1.4
the SIP stand-alone flag Options: 1. enable(1) -support stand-alone 2. disable(2) -not support stand-alone Default: disable(2)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwSipMgSoftParameter3 1.3.6.1.4.1.2011.6.36.1.70.8.1.5
the right of call control in normal call Options: 1. noControl(1) -none control 2. callerControl(2) -caller control 3. calleeControl(3) -callee control Default: noControl(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noControl(1), callerControl(2), calleeControl(3)  

hwSipMgSoftParameter4 1.3.6.1.4.1.2011.6.36.1.70.8.1.6
the right of call control in emergency call Options: 1. noControl(1) -none control 2. callerControl(2) -caller control 3. calleeControl(3) -callee control 4. emergencyCallCenterControl(4) -Controlled by the emergency call control center Default: noControl(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noControl(1), callerControl(2), calleeControl(3), emergencyCallCenterControl(4)  

hwSipMgSoftParameter5 1.3.6.1.4.1.2011.6.36.1.70.8.1.7
The flag of silence suppression in emergency call. Options: 1. close(1) -force close silence suppression when the call is emergency call 2. noControl(2) -the silence suppression is not controlled by the emergency call type Default: noControl(2)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER close(1), noControl(2)  

hwSipMgSoftParameter6 1.3.6.1.4.1.2011.6.36.1.70.8.1.8
Whether to permit emergency calls when the port is remotely blocked. Options: 1. enable(1) -permit 2. disable(2) -not permit Default: disable(2)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwSipMgSoftParameter7 1.3.6.1.4.1.2011.6.36.1.70.8.1.9
The SIP MgSoftParameter7. Reserved. Options: 1. yes(1) -yes 2. no(2) -no
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

hwSipMgSoftParameter8 1.3.6.1.4.1.2011.6.36.1.70.8.1.10
Enables the user options heartbeat message Options: 1. disable(1) -disable 2. enable(2) -enable Default: disable(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwSipMgSoftParameter9 1.3.6.1.4.1.2011.6.36.1.70.8.1.11
The SIP MgSoftParameter9. Reserved. Options: 1. yes(1) -yes 2. no(2) -no
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

hwSipMgSoftParameter10 1.3.6.1.4.1.2011.6.36.1.70.8.1.12
The SIP MgSoftParameter10. Reserved. Options: 1. yes(1) -yes 2. no(2) -no
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

hwSipMgSoftParameter11 1.3.6.1.4.1.2011.6.36.1.70.8.1.13
The SIP MgSoftParameter11. Reserved. Options: 1. yes(1) -yes 2. no(2) -no
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

hwSipMgSoftParameter12 1.3.6.1.4.1.2011.6.36.1.70.8.1.14
The SIP MgSoftParameter12. Reserved. Options: 1. yes(1) -yes 2. no(2) -no
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

hwSipMgSoftParameter13 1.3.6.1.4.1.2011.6.36.1.70.8.1.15
The SIP MgSoftParameter13. Digitmap matching mode. Options: 1. min(1) -shortest 2. max(2) -longest Default: min(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER min(1), max(2)  

hwSipMgSoftParameter14 1.3.6.1.4.1.2011.6.36.1.70.8.1.16
The SIP MgSoftParameter14. Reserved. Options: 1. yes(1) -yes 2. no(2) -no
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

hwSipMgSoftParameter15 1.3.6.1.4.1.2011.6.36.1.70.8.1.17
The SIP MgSoftParameter15, RTP filter switch. Options: 1. nofilter(1) -No Filter 2. filter(2) -Filter Default: nofilter(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER nofilter(1), filter(2)  

hwSipMgSoftParameter16 1.3.6.1.4.1.2011.6.36.1.70.8.1.18
The SIP MgSoftParameter16. Reserved. Options: 1. yes(1) -yes 2. no(2) -no
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

hwSipMgSoftParameter17 1.3.6.1.4.1.2011.6.36.1.70.8.1.19
The SIP MgSoftParameter17. Reserved. Options: 1. yes(1) -yes 2. no(2) -no
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

hwSipMgSoftParameter18 1.3.6.1.4.1.2011.6.36.1.70.8.1.20
The SIP MgSoftParameter18. Reserved. Options: 1. yes(1) -yes 2. no(2) -no
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

hwSipMgSoftParameter19 1.3.6.1.4.1.2011.6.36.1.70.8.1.21
The SIP MgSoftParameter19. Reserved. Options: 1. yes(1) -yes 2. no(2) -no
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

hwSipMgSoftParameter20 1.3.6.1.4.1.2011.6.36.1.70.8.1.22
The SIP MgSoftParameter20. Reserved. Options: 1. yes(1) -yes 2. no(2) -no
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

hwSipMgSoftParameter21 1.3.6.1.4.1.2011.6.36.1.70.8.1.23
The SIP MgSoftParameter21. Reserved. Options: 1. yes(1) -yes 2. no(2) -no
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

hwSipMgSoftParameter22 1.3.6.1.4.1.2011.6.36.1.70.8.1.24
The SIP MgSoftParameter22. Reserved. Options: 1. yes(1) -yes 2. no(2) -no
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

hwSipMgSoftParameter23 1.3.6.1.4.1.2011.6.36.1.70.8.1.25
The SIP MgSoftParameter23. Life time carried in the registration message. Default: 600
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65534  

hwSipMgSoftParameter24 1.3.6.1.4.1.2011.6.36.1.70.8.1.26
The SIP MgSoftParameter24. QoS start rtcp static. Options: 1. timode(1) -TI mode 2. nonsupport(2) -not support Default: nonsupport(2)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER timode(1), nonsupport(2)  

hwSipMgSoftParameter25 1.3.6.1.4.1.2011.6.36.1.70.8.1.27
The SIP MgSoftParameter25. Function of switching pulse signals and flash-hook events to DTMF signals. Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwSipMgSoftParameter26 1.3.6.1.4.1.2011.6.36.1.70.8.1.28
The SIP MgSoftParameter26. Retry register interval. Default: 30 Unit: second
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

hwSipMgSoftParameter27 1.3.6.1.4.1.2011.6.36.1.70.8.1.29
The SIP MgSoftParameter27. Length of defer hotline timer. Default: 5 Unit: second
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..255  

hwSipMgSoftParameter28 1.3.6.1.4.1.2011.6.36.1.70.8.1.30
The SIP MgSoftParameter28. Three-party audio mixing. Options: 1. local(1) -local audio mixing 2. network(2) -network audio mixing Default: local(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER local(1), network(2)  

hwSipMgSoftParameter29 1.3.6.1.4.1.2011.6.36.1.70.8.1.31
Service rights are set based on VAG interface. Each service is represented with one bit(0: users have no service right; 1: users have a service right). There are four bits in use, leaving other bits reserved, and the represented services are subAddress, UUS, CUG, and CDIV from low bits to high bits. Default: 65535
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

hwSipDmmParaTable 1.3.6.1.4.1.2011.6.36.1.70.9
This table is used to config the digitmap. The index of this table is hwSipDmmParaMgId.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwSipDmmParaEntry

hwSipDmmParaEntry 1.3.6.1.4.1.2011.6.36.1.70.9.1
This table is used to config the digitmap. The index of this entry is hwSipDmmParaMgId.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwSipDmmParaEntry  

hwSipDmmParaMgId 1.3.6.1.4.1.2011.6.36.1.70.9.1.1
Indicates the MG ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..16777215  

hwSipDmmParaStartTimer 1.3.6.1.4.1.2011.6.36.1.70.9.1.2
Indicates the length of the DMM start timer. Default: 20 Unit: second
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..99  

hwSipDmmParaShortTimer 1.3.6.1.4.1.2011.6.36.1.70.9.1.3
Indicates the length of the DMM short timer. Default: 4 Unit: second
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..99  

hwSipDmmParaLongTimer 1.3.6.1.4.1.2011.6.36.1.70.9.1.4
Indicates the length of the DMM long timer. Default: 20 Unit: second
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..99  

hwSipTrapRequestID 1.3.6.1.4.1.2011.6.36.7.1
The SIP trap request ID.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwSipMgResetResult 1.3.6.1.4.1.2011.6.36.7.2
The result of the SIP media gateway reset. Options: 1. success(0) -reset succesful 2. failed(1) -reset failed
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER success(0), failed(1)  

hwSipProxySign 1.3.6.1.4.1.2011.6.36.7.3
The SIP proxy sign. 0 -main 1 -standby
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 0..2  

hwIASSipResetTrap 1.3.6.1.4.1.2011.6.36.8.1.0.1
This notification indicates that the result of SIP media gateway reset operation.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwIASSipProxyFaultTrap 1.3.6.1.4.1.2011.6.36.8.2.0.1
This notification indicates that the SIP proxy server is abnormal.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwIASSipProxyRestoreTrap 1.3.6.1.4.1.2011.6.36.8.2.0.2
This notification indicates that the SIP proxy server restores from abnormal.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwVoiceUserGroupConfigTable 1.3.6.1.4.1.2011.6.36.1.70.10
This table is used to config the parameters of sip user group. The indexes of this table are hwSipUserGroupVgwId, hwSipUserGroupid.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwVoiceUserGroupConfigEntry

hwVoiceUserGroupConfigEntry 1.3.6.1.4.1.2011.6.36.1.70.10.1
This table is used to config the parameters of sip user group. The indexes of this entry are hwSipUserGroupVgwId, hwSipUserGroupid.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwVoiceUserGroupConfigEntry  

hwSipUserGroupVgwId 1.3.6.1.4.1.2011.6.36.1.70.10.1.1
SIP GateWay ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..16777215  

hwSipUserGroupid 1.3.6.1.4.1.2011.6.36.1.70.10.1.2
User Group ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

hwSipUserGroupRegisterUriMode 1.3.6.1.4.1.2011.6.36.1.70.10.1.3
Indicates the user group register URI mode. Options: 1. inneruser(1) -inner user 2. alone(2) -alone
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER inneruser(1), alone(2)  

hwSipUserGroupUri 1.3.6.1.4.1.2011.6.36.1.70.10.1.4
Indicates the Register-URI of the sip user group.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipUserGroupName 1.3.6.1.4.1.2011.6.36.1.70.10.1.5
Indicates the sip user group Name.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipUserGroupAuthUserName 1.3.6.1.4.1.2011.6.36.1.70.10.1.6
Indicates the Auth Username of the sip user group.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipUserGroupAuthPassWordMode 1.3.6.1.4.1.2011.6.36.1.70.10.1.7
Indicates the Auth PasswordMode of the sip user group. Options: 1. password(1) -auth by password 2. ha1(2) -auth by HA1
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER password(1), ha1(2)  

hwSipUserGroupAuthPassword 1.3.6.1.4.1.2011.6.36.1.70.10.1.8
Indicates the Auth Password of the sip user group.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipUserGroupAuthHA1 1.3.6.1.4.1.2011.6.36.1.70.10.1.9
Indicates the Auth HA1 value of the sip user group.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

hwSipUserGroupPrecinctMode 1.3.6.1.4.1.2011.6.36.1.70.10.1.10
Indicates the user PrecinctMode in the sip user group. Options: 1. local(1) -local 2. remote(2) -remote
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER local(1), remote(2)  

hwSipUserGroupSubscribeUaProfileFlag 1.3.6.1.4.1.2011.6.36.1.70.10.1.11
Indicates the flag of the user group with the same UA Profile privilege. Options: 1. enable(1) -enable 2. disable(2) -disable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwSipUserGroupRowStatus 1.3.6.1.4.1.2011.6.36.1.70.10.1.12
This is used to create new rows in this table, modify existing rows, and to delete existing rows.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwSipUserGroupAdminStatus 1.3.6.1.4.1.2011.6.36.1.70.10.1.13
Indicates the admin operation of the sip user group. Options: 1. endservice(1) -end service 2. startservice(2) -start service
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER endservice(1), startservice(2)  

hwSipUserGroupRunningState 1.3.6.1.4.1.2011.6.36.1.70.10.1.14
Indicates the service state of user group. Options: 1. null(1) -null 2. startSvc(2) -start service 3. rBlock(3) -remote block 4. lBlock(4) -local block
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER null(1), startSvc(2), rBlock(3), lBlock(4)  

hwSipMgSoftStringParameterConfigTable 1.3.6.1.4.1.2011.6.36.1.70.11
This table is used to config the soft string Parameters of SIP interface. The index of this table is hwSipMgSoftStringMgInterfaceIndexConfig.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwSipMgSoftStringParameterConfigEntry

hwSipMgSoftStringParameterConfigEntry 1.3.6.1.4.1.2011.6.36.1.70.11.1
This table is used to config the soft string Parameters of SIP interface. The index of this entry is hwSipMgSoftStringMgInterfaceIndexConfig.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwSipMgSoftStringParameterConfigEntry  

hwSipMgSoftStringMgInterfaceIndexConfig 1.3.6.1.4.1.2011.6.36.1.70.11.1.1
SIP GateWay ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..16777215  

hwSipMgSoftStringConfigParameter0 1.3.6.1.4.1.2011.6.36.1.70.11.1.2
The SIP MgSoftStringConfigParameter0, Reserved.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter1 1.3.6.1.4.1.2011.6.36.1.70.11.1.3
The SIP MgSoftStringConfigParameter1, visited network.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter2 1.3.6.1.4.1.2011.6.36.1.70.11.1.4
The SIP MgSoftStringConfigParameter2. Prefix of national long-distance call.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter3 1.3.6.1.4.1.2011.6.36.1.70.11.1.5
The SIP MgSoftStringConfigParameter3. Prefix of international long-distance call.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter4 1.3.6.1.4.1.2011.6.36.1.70.11.1.6
The SIP MgSoftStringConfigParameter4. CC number string.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter5 1.3.6.1.4.1.2011.6.36.1.70.11.1.7
The SIP MgSoftStringConfigParameter5. NDC number string.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter6 1.3.6.1.4.1.2011.6.36.1.70.11.1.8
The SIP MgSoftStringConfigParameter6. SCC domain name.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter7 1.3.6.1.4.1.2011.6.36.1.70.11.1.9
The SIP MgSoftStringConfigParameter7. Reserved.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter8 1.3.6.1.4.1.2011.6.36.1.70.11.1.10
The SIP MgSoftStringConfigParameter8. Reserved.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter9 1.3.6.1.4.1.2011.6.36.1.70.11.1.11
The SIP MgSoftStringConfigParameter9. Reserved.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter10 1.3.6.1.4.1.2011.6.36.1.70.11.1.12
The SIP MgSoftStringConfigParameter10. Reserved.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter11 1.3.6.1.4.1.2011.6.36.1.70.11.1.13
The SIP MgSoftStringConfigParameter11. Character string indicating that CLID or COLP is unavailable.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter12 1.3.6.1.4.1.2011.6.36.1.70.11.1.14
The SIP MgSoftStringConfigParameter12. Reserved.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter13 1.3.6.1.4.1.2011.6.36.1.70.11.1.15
The SIP MgSoftStringConfigParameter13. Character string indicating that CLID or COLP is not subscribed.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter14 1.3.6.1.4.1.2011.6.36.1.70.11.1.16
The SIP MgSoftStringConfigParameter14. SCC code of the MCID service. Pattern for similar regular expressions: 1 Supported characters: *#xX[]().^|-0123456789'capital parentheses'; 2 x and X indicate a digit ranging from 0 to 9; 3 [] indicates a matching range. For example, [0-37] indicates matching range 01237; 4 'capital parentheses'indicates the maximum number that the preceding item can be mapped. The range is 0 to 64; 5 () is used to extract characters in some scenarios; 6 . indicates that the preceding item can be mapped to one to multiple times; 7 ^ can only be the first symbol in [], indicating a supplementary set of a common mapping range. For example, [^0-7] indicates mapping range 89*# 8 | is used to separate multiple sub-expressions and each sub-expression is mapped separately; 9 - is used in [] or 'capital parentheses', indicating a range from the previous digit to the subsequent digit;
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter15 1.3.6.1.4.1.2011.6.36.1.70.11.1.17
The SIP MgSoftStringConfigParameter15. SCC code for activating the CFU service.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter16 1.3.6.1.4.1.2011.6.36.1.70.11.1.18
The SIP MgSoftStringConfigParameter16. SCC code for deactivating the CFU service.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter17 1.3.6.1.4.1.2011.6.36.1.70.11.1.19
The SIP MgSoftStringConfigParameter17. Owner name of o-row parameter of SDP. If is not configured, the default value is Huawei.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter18 1.3.6.1.4.1.2011.6.36.1.70.11.1.20
The SIP MgSoftStringConfigParameter18. Session name of s-row parameter of SDP. If is not configured, the default value is -.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter19 1.3.6.1.4.1.2011.6.36.1.70.11.1.21
The SIP MgSoftStringConfigParameter19. Ring mode name of back ring.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter20 1.3.6.1.4.1.2011.6.36.1.70.11.1.22
The SIP MgSoftStringConfigParameter20. Hook flash event report content. If it is not configured, the default value is FLASH.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter21 1.3.6.1.4.1.2011.6.36.1.70.11.1.23
The SIP MgSoftStringConfigParameter21. Resource priority header field parameter of CAT1 common call.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter22 1.3.6.1.4.1.2011.6.36.1.70.11.1.24
The SIP MgSoftStringConfigParameter22. Resource priority header field parameter of CAT2 common call.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter23 1.3.6.1.4.1.2011.6.36.1.70.11.1.25
The SIP MgSoftStringConfigParameter23. Resource priority header field parameter of CAT3 common call.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter24 1.3.6.1.4.1.2011.6.36.1.70.11.1.26
The SIP MgSoftStringConfigParameter24. Resource priority header field parameter of CAT1 emergency call.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter25 1.3.6.1.4.1.2011.6.36.1.70.11.1.27
The SIP MgSoftStringConfigParameter25. Resource priority header field parameter of CAT2 emergency call.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter26 1.3.6.1.4.1.2011.6.36.1.70.11.1.28
The SIP MgSoftStringConfigParameter26. Resource priority header field parameter of CAT3 emergency call.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter27 1.3.6.1.4.1.2011.6.36.1.70.11.1.29
The SIP MgSoftStringConfigParameter27. SERVICEDOMAIN in URI of ROUTE header field.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter28 1.3.6.1.4.1.2011.6.36.1.70.11.1.30
The SIP MgSoftStringConfigParameter28. SCC code for activating a service. To activate multiple services, the codes are separated by semicolon (;). The first supported service is CW service.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter29 1.3.6.1.4.1.2011.6.36.1.70.11.1.31
The SIP MgSoftStringConfigParameter29. SCC code for deactivating a service. To deactivate multiple services, the codes are separated by semicolon (;). The first supported service is CW service.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter30 1.3.6.1.4.1.2011.6.36.1.70.11.1.32
The SIP MgSoftStringConfigParameter30. Ring mode name of default ring.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter31 1.3.6.1.4.1.2011.6.36.1.70.11.1.33
The SIP MgSoftStringConfigParameter31. SCC1 code for activating the customized event. Pattern for similar regular expressions described in hwSipMgSoftStringConfigParameter14.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter32 1.3.6.1.4.1.2011.6.36.1.70.11.1.34
The SIP MgSoftStringConfigParameter32. SCC2 code for activating the customized event. Pattern for similar regular expressions described in hwSipMgSoftStringConfigParameter14.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter33 1.3.6.1.4.1.2011.6.36.1.70.11.1.35
The SIP MgSoftStringConfigParameter33. SCC3 code for activating the customized event. Pattern for similar regular expressions described in hwSipMgSoftStringConfigParameter14.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter34 1.3.6.1.4.1.2011.6.36.1.70.11.1.36
The SIP MgSoftStringConfigParameter34. Indicate the p-Access-Network-Info head of POTS.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter35 1.3.6.1.4.1.2011.6.36.1.70.11.1.37
The SIP MgSoftStringConfigParameter35. Indicate the p-Access-Network-Info head of BRI.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter36 1.3.6.1.4.1.2011.6.36.1.70.11.1.38
The SIP MgSoftStringConfigParameter36. Indicate the p-Access-Network-Info head of PRI.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter37 1.3.6.1.4.1.2011.6.36.1.70.11.1.39
The SIP MgSoftStringConfigParameter37. Default hotline number.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter38 1.3.6.1.4.1.2011.6.36.1.70.11.1.40
The SIP MgSoftStringConfigParameter38. Character string indicating that CLID or COLP is restricted.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter39 1.3.6.1.4.1.2011.6.36.1.70.11.1.41
The SIP MgSoftStringConfigParameter39. Indicate the p-Access-Network-Info head of R2.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter40 1.3.6.1.4.1.2011.6.36.1.70.11.1.42
The SIP MgSoftStringConfigParameter40. Indicate URI for emergency calls.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter41 1.3.6.1.4.1.2011.6.36.1.70.11.1.43
The SIP MgSoftStringConfigParameter41. SCC5 code for activating the customized event. Pattern for similar regular expressions described in hwSipMgSoftStringConfigParameter14.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringConfigParameter42 1.3.6.1.4.1.2011.6.36.1.70.11.1.44
The SIP MgSoftStringConfigParameter42. Indicate the pattern for fixed phone number. Pattern for similar regular expressions described in hwSipMgSoftStringConfigParameter14.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringParameterRunningTable 1.3.6.1.4.1.2011.6.36.1.70.12
This table is used to config the soft string Parameters of SIP interface. The index of this table is hwSipMgSoftStringMgInterfaceIndexRunning.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwSipMgSoftStringParameterRunningEntry

hwSipMgSoftStringParameterRunningEntry 1.3.6.1.4.1.2011.6.36.1.70.12.1
This table is used to config the soft string Parameters of SIP interface. The index of this entry is hwSipMgSoftStringMgInterfaceIndexRunning.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwSipMgSoftStringParameterRunningEntry  

hwSipMgSoftStringMgInterfaceIndexRunning 1.3.6.1.4.1.2011.6.36.1.70.12.1.1
SIP GateWay ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..16777215  

hwSipMgSoftStringRunningParameter0 1.3.6.1.4.1.2011.6.36.1.70.12.1.2
The SIP MgSoftStringRunningParameter0. Reserved.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter1 1.3.6.1.4.1.2011.6.36.1.70.12.1.3
The SIP MgSoftStringRunningParameter1. Visited newwork ID.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter2 1.3.6.1.4.1.2011.6.36.1.70.12.1.4
The SIP MgSoftStringRunningParameter2. Prefix of national long-distance call.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter3 1.3.6.1.4.1.2011.6.36.1.70.12.1.5
The SIP MgSoftStringRunningParameter3. Prefix of international long-distance call.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter4 1.3.6.1.4.1.2011.6.36.1.70.12.1.6
The SIP MgSoftStringRunningParameter4. CC number string.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter5 1.3.6.1.4.1.2011.6.36.1.70.12.1.7
The SIP MgSoftStringRunningParameter5. NDC number string.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter6 1.3.6.1.4.1.2011.6.36.1.70.12.1.8
The SIP MgSoftStringRunningParameter6. SCC domain name.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter7 1.3.6.1.4.1.2011.6.36.1.70.12.1.9
The SIP MgSoftStringRunningParameter7. Reserved.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter8 1.3.6.1.4.1.2011.6.36.1.70.12.1.10
The SIP MgSoftStringRunningParameter8. Reserved.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter9 1.3.6.1.4.1.2011.6.36.1.70.12.1.11
The SIP MgSoftStringRunningParameter9. Reserved.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter10 1.3.6.1.4.1.2011.6.36.1.70.12.1.12
The SIP MgSoftStringRunningParameter10. Reserved.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter11 1.3.6.1.4.1.2011.6.36.1.70.12.1.13
The SIP MgSoftStringRunningParameter11. Character string indicating that CLID or COLP is unavailable.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter12 1.3.6.1.4.1.2011.6.36.1.70.12.1.14
The SIP MgSoftStringRunningParameter12. Reserved.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter13 1.3.6.1.4.1.2011.6.36.1.70.12.1.15
The SIP MgSoftStringRunningParameter13. Character string indicating that CLID or COLP is not subscribed.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter14 1.3.6.1.4.1.2011.6.36.1.70.12.1.16
The SIP MgSoftStringRunningParameter14. SCC code of the MCID service.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter15 1.3.6.1.4.1.2011.6.36.1.70.12.1.17
The SIP MgSoftStringRunningParameter15. SCC code for activating the CFU service.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter16 1.3.6.1.4.1.2011.6.36.1.70.12.1.18
The SIP MgSoftStringRunningParameter16. SCC code for deactivating the CFU service.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter17 1.3.6.1.4.1.2011.6.36.1.70.12.1.19
The SIP MgSoftStringRunningParameter17. Owner name of o-row parameter of SDP. If is not configured, the default value is Huawei.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter18 1.3.6.1.4.1.2011.6.36.1.70.12.1.20
The SIP MgSoftStringRunningParameter18. Session name of s-row parameter of SDP. If is not configured, the default value is -.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter19 1.3.6.1.4.1.2011.6.36.1.70.12.1.21
The SIP MgSoftStringRunningParameter19. Ring mode name of back ring.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter20 1.3.6.1.4.1.2011.6.36.1.70.12.1.22
The SIP MgSoftStringRunningParameter20. Hook flash event report content. If it is not configured, the default value is FLASH.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter21 1.3.6.1.4.1.2011.6.36.1.70.12.1.23
The SIP MgSoftStringRunningParameter21. Resource priority header field parameter of CAT1 common call.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter22 1.3.6.1.4.1.2011.6.36.1.70.12.1.24
The SIP MgSoftStringRunningParameter22. Resource priority header field parameter of CAT2 common call.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter23 1.3.6.1.4.1.2011.6.36.1.70.12.1.25
The SIP MgSoftStringRunningParameter23. Resource priority header field parameter of CAT3 common call.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter24 1.3.6.1.4.1.2011.6.36.1.70.12.1.26
The SIP MgSoftStringRunningParameter24. Resource priority header field parameter of CAT1 emergency call.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter25 1.3.6.1.4.1.2011.6.36.1.70.12.1.27
The SIP MgSoftStringRunningParameter25. Resource priority header field parameter of CAT2 emergency call.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter26 1.3.6.1.4.1.2011.6.36.1.70.12.1.28
The SIP MgSoftStringRunningParameter26. Resource priority header field parameter of CAT3 emergency call.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter27 1.3.6.1.4.1.2011.6.36.1.70.12.1.29
The SIP MgSoftStringRunningParameter27. SERVICEDOMAIN in URI of ROUTE header field.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter28 1.3.6.1.4.1.2011.6.36.1.70.12.1.30
The SIP MgSoftStringConfigParameter28. SCC code for activating a service. To activate multiple services, the codes are separated by semicolon (;). The first supported service is CW service.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter29 1.3.6.1.4.1.2011.6.36.1.70.12.1.31
The SIP MgSoftStringConfigParameter29. SCC code for deactivating a service. To deactivate multiple services, the codes are separated by semicolon (;). The first supported service is CW service.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter30 1.3.6.1.4.1.2011.6.36.1.70.12.1.32
The SIP MgSoftStringRunningParameter30. Ring mode name of default ring.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter31 1.3.6.1.4.1.2011.6.36.1.70.12.1.33
The SIP MgSoftStringRunningParameter31. SCC1 code for activating the customized event.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter32 1.3.6.1.4.1.2011.6.36.1.70.12.1.34
The SIP MgSoftStringRunningParameter32. SCC2 code for activating the customized event.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter33 1.3.6.1.4.1.2011.6.36.1.70.12.1.35
The SIP MgSoftStringRunningParameter33. SCC3 code for activating the customized event.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter34 1.3.6.1.4.1.2011.6.36.1.70.12.1.36
The SIP MgSoftStringRunningParameter34. Indicates the p-Access-Network-Info header of POTS.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter35 1.3.6.1.4.1.2011.6.36.1.70.12.1.37
The SIP MgSoftStringRunningParameter35. Indicates the p-Access-Network-Info header of BRI.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter36 1.3.6.1.4.1.2011.6.36.1.70.12.1.38
The SIP MgSoftStringRunningParameter36. Indicates the p-Access-Network-Info header of PRI.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter37 1.3.6.1.4.1.2011.6.36.1.70.12.1.39
The SIP MgSoftStringRunningParameter37. Default hotline number.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter38 1.3.6.1.4.1.2011.6.36.1.70.12.1.40
The SIP MgSoftStringRunningParameter38. Character string indicating that CLID or COLP is restricted.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter39 1.3.6.1.4.1.2011.6.36.1.70.12.1.41
The SIP MgSoftStringRunningParameter39. Indicates the p-Access-Network-Info header of R2.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter40 1.3.6.1.4.1.2011.6.36.1.70.12.1.42
The SIP MgSoftStringRunningParameter40. Indicates URI for emergency calls.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter41 1.3.6.1.4.1.2011.6.36.1.70.12.1.43
The SIP MgSoftStringConfigParameter41. SCC5 code for activating the customized event.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipMgSoftStringRunningParameter42 1.3.6.1.4.1.2011.6.36.1.70.12.1.44
The SIP MgSoftStringConfigParameter42. Indicates the pattern for fixed phone number.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwVGWDigitMapGroupRefTable 1.3.6.1.4.1.2011.6.36.1.70.13
This table is used to config the digitmap group refered to a gateway. The index of this table is hwVGWDigitMapGroupInterfaceID.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwVGWDigitMapGroupRefEntry

hwVGWDigitMapGroupRefEntry 1.3.6.1.4.1.2011.6.36.1.70.13.1
This table is used to config the digitmap group refered to a gateway. The index of this entry is hwVGWDigitMapGroupInterfaceID.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwVGWDigitMapGroupRefEntry  

hwVGWDigitMapGroupInterfaceID 1.3.6.1.4.1.2011.6.36.1.70.13.1.1
Indicates the ID of SIP gate way.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..16777215  

hwVGWDigitMapGroupName 1.3.6.1.4.1.2011.6.36.1.70.13.1.2
Indicates the digitmap group refer to SIP gateway.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

hwVGWISDNCauseResponseMapTable 1.3.6.1.4.1.2011.6.36.1.70.14
This table is used to config the Q.850 Code to SIP Response code. The index of this table is hwIsdnCauseMapMgId and hwIsdnCauseMapCause.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwVGWISDNCauseResponseMapEntry

hwVGWISDNCauseResponseMapEntry 1.3.6.1.4.1.2011.6.36.1.70.14.1
This table is used to config the Q.850 Code to SIP Response code. The index of this entry is hwIsdnCauseMapMgId and hwIsdnCauseMapCause.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwVGWISDNCauseResponseMapEntry  

hwIsdnCauseMapMgId 1.3.6.1.4.1.2011.6.36.1.70.14.1.1
Indicates the ID of SIP Interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..16777215  

hwIsdnCauseMapCause 1.3.6.1.4.1.2011.6.36.1.70.14.1.2
Indicates the Isdn Cause.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..127  

hwIsdnCauseMapSipResponse 1.3.6.1.4.1.2011.6.36.1.70.14.1.3
Indicates the Sip Response Code.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 300..699  

hwIsdnCauseMapRowStatus 1.3.6.1.4.1.2011.6.36.1.70.14.1.4
This is used to create new rows in this table, modify existing rows, and to delete existing rows.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwVGWSIPResponseCauseMapTable 1.3.6.1.4.1.2011.6.36.1.70.15
This table is used to config the SIP Response code to Q.850 Code. The index of this table is hwIsdnCauseMapMgId and hwIsdnCauseMapCause.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwVGWSIPResponseCauseMapEntry

hwVGWSIPResponseCauseMapEntry 1.3.6.1.4.1.2011.6.36.1.70.15.1
This table is used to config the SIP Response code to Q.850 Code. The index of this entry is hwIsdnCauseMapMgId and hwIsdnCauseMapCause.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwVGWSIPResponseCauseMapEntry  

hwSipResponseMapMgId 1.3.6.1.4.1.2011.6.36.1.70.15.1.1
Indicates the ID of SIP Interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..16777215  

hwSipResponseMapResponse 1.3.6.1.4.1.2011.6.36.1.70.15.1.2
Indicates the Sip Response Cause.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 300..699  

hwSipResponseMapIsdnCause 1.3.6.1.4.1.2011.6.36.1.70.15.1.3
Indicates the Q.850 Cause Code.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..127  

hwSipResponseMapRowStatus 1.3.6.1.4.1.2011.6.36.1.70.15.1.4
This is used to create new rows in this table, modify existing rows, and to delete existing rows.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwVGWSIPResponseCauseMapRunningTable 1.3.6.1.4.1.2011.6.36.1.70.16
This table is used to config the SIP Response code to Q.850 Code. The index of this table is hwIsdnCauseMapMgId and hwIsdnCauseMapCause.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwVGWSIPResponseCauseMapRunningEntry

hwVGWSIPResponseCauseMapRunningEntry 1.3.6.1.4.1.2011.6.36.1.70.16.1
This table is used to config the SIP Response code to Q.850 Code. The index of this entry is hwIsdnCauseMapMgId and hwIsdnCauseMapCause.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwVGWSIPResponseCauseMapRunningEntry  

hwSipResponseMaprunningMgId 1.3.6.1.4.1.2011.6.36.1.70.16.1.1
Indicates the ID of SIP Interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..16777215  

hwSipResponseMaprunningResponse 1.3.6.1.4.1.2011.6.36.1.70.16.1.2
Indicates the Sip Response Cause.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 300..699  

hwSipResponseMaprunningIsdnCause 1.3.6.1.4.1.2011.6.36.1.70.16.1.3
Indicates the Q.850 Cause Code.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..127  

hwVGWISDNCauseResponseMapRunningTable 1.3.6.1.4.1.2011.6.36.1.70.17
This table is used to config the Q.850 Code to SIP Response code. The index of this table is hwIsdnCauseMapMgId and hwIsdnCauseMapCause.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwVGWISDNCauseResponseMapRunningEntry

hwVGWISDNCauseResponseMapRunningEntry 1.3.6.1.4.1.2011.6.36.1.70.17.1
This table is used to config the Q.850 Code to SIP Response code. The index of this entry is hwIsdnCauseMapMgId and hwIsdnCauseMapCause.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwVGWISDNCauseResponseMapRunningEntry  

hwIsdnCauseMaprunningMgId 1.3.6.1.4.1.2011.6.36.1.70.17.1.1
Indicates the ID of SIP Interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..16777215  

hwIsdnCauseMaprunningCause 1.3.6.1.4.1.2011.6.36.1.70.17.1.2
Indicates the Isdn Cause.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..127  

hwIsdnCauseMaprunningSipResponse 1.3.6.1.4.1.2011.6.36.1.70.17.1.3
Indicates the Sip Response Code.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 300..699  

hwSipHuntingGroupTable 1.3.6.1.4.1.2011.6.36.1.70.18
This table is used to config the parameters of sip hunting group. The indexes of this table are hwSipHGVgwId, hwSipHGName.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwSipHuntingGroupEntry

hwSipHuntingGroupEntry 1.3.6.1.4.1.2011.6.36.1.70.18.1
This table is used to config the parameters of sip hunting group. The indexes of this entry are hwSipHGVgwId, hwSipHGName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwSipHuntingGroupEntry  

hwSipHGVgwId 1.3.6.1.4.1.2011.6.36.1.70.18.1.1
SIP GateWay ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..16777215  

hwSipHGName 1.3.6.1.4.1.2011.6.36.1.70.18.1.2
Indicates the sip hunting group Name.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

hwSipHGHuntingMode 1.3.6.1.4.1.2011.6.36.1.70.18.1.3
Indicates the Hunting Mode of the sip hunting group. Options: 1. order(1) -hunt by order 2. round(2) -hunt by round robin Default: round(2)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER order(1), round(2)  

hwSipHGInheritFlag 1.3.6.1.4.1.2011.6.36.1.70.18.1.4
Indicates the inheritance flag of the hunting group. Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwSipHGRowStatus 1.3.6.1.4.1.2011.6.36.1.70.18.1.5
This is used to create new rows in this table, modify existing rows, and to delete existing rows.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwSipHuntingGroupMemberTable 1.3.6.1.4.1.2011.6.36.1.70.19
This table is used to config the parameters of sip hunting group member. The indexes of this table are hwSipHGMemberGroupName, hwSipHGMemberPortIndex, hwSipHGMemberSubGroupName.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwSipHuntingGroupMemberEntry

hwSipHuntingGroupMemberEntry 1.3.6.1.4.1.2011.6.36.1.70.19.1
This table is used to config the parameters of sip hunting group member. The indexes of this entry are hwSipHGMemberGroupName, hwSipHGMemberPortIndex, hwSipHGMemberSubGroupName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwSipHuntingGroupMemberEntry  

hwSipHGMemberGroupName 1.3.6.1.4.1.2011.6.36.1.70.19.1.1
Indicates the sip hunting group member Name.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

hwSipHGMemberPortIndex 1.3.6.1.4.1.2011.6.36.1.70.19.1.2
Indicates the index of the port member in sip hunting group.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwSipHGMemberSubGroupName 1.3.6.1.4.1.2011.6.36.1.70.19.1.3
Indicates the subgroup name in sip hunting group.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

hwSipHGMemberOrder 1.3.6.1.4.1.2011.6.36.1.70.19.1.4
Indicates the priority of member in the sip hunting group.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

hwSipHGMemberRowStatus 1.3.6.1.4.1.2011.6.36.1.70.19.1.5
This is used to create new rows in this table, modify existing rows, and to delete existing rows.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwSipGroupNumberConfigTable 1.3.6.1.4.1.2011.6.36.1.70.20
This table is used to config the parameters of sip group number. The indexes of this table are hwSipGroupNumberVgwId, hwSipGroupNumberUri.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwSipGroupNumberConfigEntry

hwSipGroupNumberConfigEntry 1.3.6.1.4.1.2011.6.36.1.70.20.1
This table is used to config the parameters of sip group number. The indexes of this entry are hwSipGroupNumberVgwId, hwSipGroupNumberUri.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwSipGroupNumberConfigEntry  

hwSipGroupNumberVgwId 1.3.6.1.4.1.2011.6.36.1.70.20.1.1
SIP GateWay ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..16777215  

hwSipGroupNumberUri 1.3.6.1.4.1.2011.6.36.1.70.20.1.2
Indicates the sip group number uri.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

hwSipGroupNumberGroupName 1.3.6.1.4.1.2011.6.36.1.70.20.1.3
Indicates the name of the sip group which the sip group number assigned to. The name cannot contain a question mark or double quotation marks.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

hwSipGroupNumberRowStatus 1.3.6.1.4.1.2011.6.36.1.70.20.1.4
This is used to create new rows in this table, modify existing rows, and to delete existing rows.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwSipGroupNumberOperTable 1.3.6.1.4.1.2011.6.36.1.70.21
This table is used to operate the sip group number. The indexes of this table are hwSipGroupNumberOperVgwId, hwSipGroupNumberOperUri.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwSipGroupNumberOperEntry

hwSipGroupNumberOperEntry 1.3.6.1.4.1.2011.6.36.1.70.21.1
This table is used to operate the sip group number. The indexes of this entry are hwSipGroupNumberOperVgwId, hwSipGroupNumberOperUri.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwSipGroupNumberOperEntry  

hwSipGroupNumberOperVgwId 1.3.6.1.4.1.2011.6.36.1.70.21.1.1
SIP GateWay ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..16777215  

hwSipGroupNumberOperUri 1.3.6.1.4.1.2011.6.36.1.70.21.1.2
Indicates the sip group number uri.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

hwSipGroupNumberAdminState 1.3.6.1.4.1.2011.6.36.1.70.21.1.3
Indicates the Administration State of the sip group number. Options: 1. blockedLocally(1) -the service is blocked cause of the local reason 2. blockedRemotely(2) -the service is blocked cause of the remote reason 3. inService(3) -the service is normal
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER blockedLocally(1), blockedRemotely(2), inService(3)  

hwSipGroupNumberOperType 1.3.6.1.4.1.2011.6.36.1.70.21.1.4
Indicates the operation on the sip group number. Options: 1. endService(1) -end service 2. startService(2) -start service
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER endService(1), startService(2)  

hwSipGroupNumberRightTable 1.3.6.1.4.1.2011.6.36.1.70.22
This table is used to config service rights or authentication informations of sip group number. The indexes of this table are hwSipGroupNumberRightVgwId, hwSipGroupNumberRightUri.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwSipGroupNumberRightEntry

hwSipGroupNumberRightEntry 1.3.6.1.4.1.2011.6.36.1.70.22.1
This table is used to config service rights or authentication informations of sip group number. The indexes of this entry are hwSipGroupNumberRightVgwId, hwSipGroupNumberRightUri.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwSipGroupNumberRightEntry  

hwSipGroupNumberRightVgwId 1.3.6.1.4.1.2011.6.36.1.70.22.1.1
SIP GateWay ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..16777215  

hwSipGroupNumberRightUri 1.3.6.1.4.1.2011.6.36.1.70.22.1.2
Indicates the sip group number uri.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

hwSipGroupNumberRightCentrexNo 1.3.6.1.4.1.2011.6.36.1.70.22.1.3
Indicates the centrexno of the sip group number.4294967295 means to clear the configuration.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwSipGroupNumberRightCentrexPrefix 1.3.6.1.4.1.2011.6.36.1.70.22.1.4
Indicates the centrexprefix of the sip group number.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..7)  

hwSipGroupNumberRightCentrexFlag 1.3.6.1.4.1.2011.6.36.1.70.22.1.5
Indicates the centrex flag of the sip group number. Options: 1. dialDirectly(1) -dialDirectly 2. dialSecondary(2) -dialSecondary Default: dialDirectly(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dialDirectly(1), dialSecondary(2)  

hwSipGroupNumberRightCallHold 1.3.6.1.4.1.2011.6.36.1.70.22.1.6
Indicates the callhold right of the sip group number. Options: 1. enable(1) -enable 2. disable(2) -disable Default: enable(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwSipGroupNumberRightThreeParty 1.3.6.1.4.1.2011.6.36.1.70.22.1.7
Indicates the three-party right of the sip group number. Options: 1. enable(1) -enable 2. disable(2) -disable Default: enable(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwSipGroupNumberRightConf 1.3.6.1.4.1.2011.6.36.1.70.22.1.8
Indicates the conference right of the sip group number. Options: 1. enable(1) -enable 2. disable(2) -disable Default: enable(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwSipGroupNumberRightCt 1.3.6.1.4.1.2011.6.36.1.70.22.1.9
Indicates the calltransfer right of the sip group number. Options: 1. enable(1) -enable 2. disable(2) -disable Default: enable(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwSipGroupNumberRightMcid 1.3.6.1.4.1.2011.6.36.1.70.22.1.10
Indicates the mcid right of the sip group number. Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwSipGroupNumberRightAuthName 1.3.6.1.4.1.2011.6.36.1.70.22.1.11
Indicates the Auth Name of the sip group number.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipGroupNumberRightAuthPasswordMode 1.3.6.1.4.1.2011.6.36.1.70.22.1.12
Indicates the Auth PasswordMode of the sip group number. Options: 1. password(1) -auth by password 2. ha1(2) -auth by HA1
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER password(1), ha1(2)  

hwSipGroupNumberRightAuthPassword 1.3.6.1.4.1.2011.6.36.1.70.22.1.13
Indicates the Auth Password of the sip group number.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipGroupNumberRightAuthHA1 1.3.6.1.4.1.2011.6.36.1.70.22.1.14
Indicates the Auth HA1 value of the sip group number.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

hwSipGroupNumberRightCw 1.3.6.1.4.1.2011.6.36.1.70.22.1.15
Indicates the call-waiting right of the sip group number.It is valid to ring-parallel-group. Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwSipGroupNumberRightDc 1.3.6.1.4.1.2011.6.36.1.70.22.1.16
Indicates the dual communication right of the sip group number. Options: 1. enable(1) -enable 2. disable(2) -disable Default: enable(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwSipGroupNumberRightMwi 1.3.6.1.4.1.2011.6.36.1.70.22.1.17
Indicates the mwi right of the sip group number.It is valid to ring-parallel-group. Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwSipGroupNumberRightAnonymousCall 1.3.6.1.4.1.2011.6.36.1.70.22.1.18
Indicates the anonymous-call right of the sip group number. Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwSipGroupNumberRightAutoReversePolarity 1.3.6.1.4.1.2011.6.36.1.70.22.1.19
Indicates the auto reverse polarity right of the sip group number.It is valid to PSTN users. Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwSipGroupNumberRightDisplayNameMode 1.3.6.1.4.1.2011.6.36.1.70.22.1.20
Indicates the display name mode right of the sip group number. Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwSipGroupNumberRightPermanentHold 1.3.6.1.4.1.2011.6.36.1.70.22.1.21
Indicates the permanent-hold right of the sip group number.It is valid to PSTN users. Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwSipGroupNumberRightCutoffDisconnect 1.3.6.1.4.1.2011.6.36.1.70.22.1.22
Indicates the cutoff-disconnect right of the sip group number.It is valid to PSTN users. Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwSipGroupNumberRightSccClass 1.3.6.1.4.1.2011.6.36.1.70.22.1.23
Indicates the SCC class service( for example call-park, call-pickup, EBO.) right of the sip group number.It is valid to PSTN users. Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwSipGroupNumberRightFastDisconnect 1.3.6.1.4.1.2011.6.36.1.70.22.1.24
Indicates the fast-disconnect right of the sip group number.It is valid to PSTN users. Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwSipGroupNumberRightHotLine 1.3.6.1.4.1.2011.6.36.1.70.22.1.25
Indicates the hotline right of the sip group number.It is valid to PSTN users. Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwSipGroupNumberRightMwiMode 1.3.6.1.4.1.2011.6.36.1.70.22.1.26
Indicates the MwiMode of the sip group number.It is valid to ring-parallel-group. Options: 1. deferred(1) -deferred 2. immediate(2) -immediate 3. combine(3) -combine Default: deferred(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER deferred(1), immediate(2), combine(3)  

hwSipGroupNumberRightHotTime 1.3.6.1.4.1.2011.6.36.1.70.22.1.27
Indicates the HotTime of the sip group number.It is valid to PSTN users. Unit: second Default: 5
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..255  

hwSipGroupNumberRightHotLineNum 1.3.6.1.4.1.2011.6.36.1.70.22.1.28
Indicates the HotLineNum of the sip group number, the length of hotlinenum mustn't exceed 64.It is valid to PSTN users.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipGroupNumberRightDialTone 1.3.6.1.4.1.2011.6.36.1.70.22.1.29
Indicates the DialTone of the sip group number. Options: 1. normal(1) -normal tone 2. special(2) -special tone 3. mw(3) -message waiting tone 4. stutter(4) -stutter tone Default: normal(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), special(2), mw(3), stutter(4)  

hwSipGroupNumberRightCfbNum 1.3.6.1.4.1.2011.6.36.1.70.22.1.30
Indicates the CfbNum of the sip group number.It is valid to ring-parallel-group.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipGroupNumberRightCfnrNum 1.3.6.1.4.1.2011.6.36.1.70.22.1.31
Indicates the CfnrNum of the sip group number.It is valid to ring-parallel-group.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipGroupNumberRightCfuNum 1.3.6.1.4.1.2011.6.36.1.70.22.1.32
Indicates the CfuNum of the sip group number.It is valid to ring-parallel-group.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwSipGroupNumberRightCfnrTime 1.3.6.1.4.1.2011.6.36.1.70.22.1.33
Indicates the CfnrTime of the sip group number.It is valid to ring-parallel-group. Unit: second Default: 100
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

hwSipGroupNumberRightDisplayName 1.3.6.1.4.1.2011.6.36.1.70.22.1.34
Indicates the display name string. The character set is unrestricted.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

hwSipGroupNumberRightPermanentHoldMode 1.3.6.1.4.1.2011.6.36.1.70.22.1.35
Indicates the PermanentHoldMode of the sip group number.It is valid to PSTN users. Options: 1. norecall(1) -no recall 2. reminder(2) -reminder 3. recall(3) -recall Default: norecall(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER norecall(1), reminder(2), recall(3)  

hwSipGroupNumberRightPermanentHoldTime 1.3.6.1.4.1.2011.6.36.1.70.22.1.36
Indicates the PermanentHoldTime of the sip group number.It is valid to PSTN users. Unit: second Default: 20
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 12..1023  

hwSipRingParallelGroupTable 1.3.6.1.4.1.2011.6.36.1.70.23
This table is used to config the parameters of sip ring-parallel-group. The indexes of this table are hwSipRPGVgwId, hwSipRPGName.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwSipRingParallelGroupEntry

hwSipRingParallelGroupEntry 1.3.6.1.4.1.2011.6.36.1.70.23.1
This table is used to config the parameters of sip ring-parallel-group. The indexes of this entry are hwSipRPGVgwId, hwSipRPGName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwSipRingParallelGroupEntry  

hwSipRPGVgwId 1.3.6.1.4.1.2011.6.36.1.70.23.1.1
SIP GateWay ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..16777215  

hwSipRPGName 1.3.6.1.4.1.2011.6.36.1.70.23.1.2
Indicates the sip ring-parallel-group Name. The name cannot contain a question mark or double quotation marks.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

hwSipRPGSelectMode 1.3.6.1.4.1.2011.6.36.1.70.23.1.3
Indicates the Select Mode of the sip ring-parallel-group. Options: 1. busyfirst(1) -hunt all busy members first 2. idlefirst(2) -hunt all idle members first Default: busyfirst(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER busyfirst(1), idlefirst(2)  

hwSipRPGRowStatus 1.3.6.1.4.1.2011.6.36.1.70.23.1.4
This is used to create new rows in this table, modify existing rows, and to delete existing rows.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwSipRingParallelGroupMemberTable 1.3.6.1.4.1.2011.6.36.1.70.24
This table is used to config the parameters of sip ring-parallel-group member. The indexes of this table are hwSipRPGMemberGroupName, hwSipRPGMemberPortIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwSipRingParallelGroupMemberEntry

hwSipRingParallelGroupMemberEntry 1.3.6.1.4.1.2011.6.36.1.70.24.1
This table is used to config the parameters of sip ring-parallel-group member. The indexes of this entry are hwSipRPGMemberGroupName, hwSipRPGMemberPortIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwSipRingParallelGroupMemberEntry  

hwSipRPGMemberGroupName 1.3.6.1.4.1.2011.6.36.1.70.24.1.1
Indicates the sip ring-parallel-group member Name. The name cannot contain a question mark or double quotation marks.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

hwSipRPGMemberPortIndex 1.3.6.1.4.1.2011.6.36.1.70.24.1.2
Indicates the index of the port member in sip ring-parallel-group.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwSipRPGMemberRowStatus 1.3.6.1.4.1.2011.6.36.1.70.24.1.3
This is used to create new rows in this table, modify existing rows, and to delete existing rows.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwVGWLoadsharingRunningTable 1.3.6.1.4.1.2011.6.36.1.70.25
This table is used to query load sharing addresses of proxy. The indexes of this table are hwVGWLoadsharingRunningVgwId, hwVGWLoadsharingRunningAddressIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwVGWLoadsharingRunningEntry

hwVGWLoadsharingRunningEntry 1.3.6.1.4.1.2011.6.36.1.70.25.1
This table is used to query load sharing addresses of proxy. The indexes of this entry are hwVGWLoadsharingRunningVgwId, hwVGWLoadsharingRunningAddressIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwVGWLoadsharingRunningEntry  

hwVGWLoadsharingRunningVgwId 1.3.6.1.4.1.2011.6.36.1.70.25.1.1
SIP GateWay ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 -1..16777215  

hwVGWLoadsharingRunningAddressIndex 1.3.6.1.4.1.2011.6.36.1.70.25.1.2
Indicates address index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 -1..7  

hwVGWLoadsharingRunningIpAddress 1.3.6.1.4.1.2011.6.36.1.70.25.1.3
Indicates the load sharing IP of SipVgw.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwVGWLoadsharingRunningPort 1.3.6.1.4.1.2011.6.36.1.70.25.1.4
Indicates the load sharing port of SipVgw.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor