HUAWEI-VOICEUSER-MIB

File: HUAWEI-VOICEUSER-MIB.mib (180681 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-CONF	SNMPv2-TC
HUAWEI-MIB	HUAWEI-DEVICE-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	NOTIFICATION-TYPE
private	Integer32	Unsigned32
MODULE-COMPLIANCE	OBJECT-GROUP	NOTIFICATION-GROUP
TEXTUAL-CONVENTION	IpAddress	TimeTicks
Counter32	RowStatus	DisplayString
huaweiUtility	hwConfigChangeIP

Defined Types

HwPstnCTPConfigEntry
SEQUENCE
	hwPstnCTPConfigIndex	Integer32
	hwPstnCTPMgId	Integer32
	hwPstnCTPTerminationID	OCTET STRING
	hwPstnCTPTelNo	OCTET STRING
	hwPstnCTPRowStatus	RowStatus
	hwPstnCTPLayerFlag	INTEGER
	hwPstnCTPPriorityFlag	INTEGER
	hwPstnCTPPotsLineType	INTEGER
	hwPstnCTPDCTime	Integer32
	hwPstnCTPFSKDelayInterval	Integer32
	hwPstnCTPCidTransWhen	INTEGER
	hwPstnCTPCidFormat	INTEGER
	hwPstnCTPVQEAgc	INTEGER
	hwPstnCTPVQESns	INTEGER
	hwPstnCTPVQEAgcLevel	Integer32
	hwPstnCTPVQESnsLevel	Integer32
	hwPstnCTPDspInputGain	Integer32
	hwPstnCTPDspOutputGain	Integer32
	hwPstnCTPDetectANSbarBySingleToneFlag	INTEGER
	hwPstnCTPBellANSFlag	INTEGER
	hwPstnCTPDspParaTemplate	OCTET STRING
	hwPstnCTPCidFskMode	INTEGER
	hwPstnCTPCidTasPattern	INTEGER
	hwPstnCTPUserGroupid	Integer32
	hwPstnCTPDigitMapGroupName	OCTET STRING
	hwPstnCTPForceSendFsk	INTEGER
	hwPstnCTPFSKAlertInterval	Integer32
	hwPstnCTPConfigDefaultCli	OCTET STRING
	hwPstnCTPEOCTime	Integer32
	hwPstnCTPRemoteBlockPowerDeny	INTEGER

HwPstnCTPOperEntry
SEQUENCE
	hwPstnCTPOperIndex	Integer32
	hwPstnCTPSrvState	INTEGER
	hwPstnCTPAdminState	INTEGER
	hwPstnCTPAdminOper	INTEGER
	hwPstnCTPSrvStateChange	TimeTicks
	hwPstnCTPAdminStateChange	TimeTicks
	hwPstnCTPMaxCobTime	Integer32
	hwPstnCTPOnexpire	INTEGER
	hwPstnCTPRegState	INTEGER
	hwPstnCTPCallState	INTEGER
	hwPstnCTPCallWaitState	INTEGER

HwMgPortStatisticsInfoEntry
SEQUENCE
	hwMgPortStatInfoIndex	Integer32
	hwPstnCTPStatTotalNum	Integer32
	hwPstnCTPStatFaultNum	Integer32
	hwPstnCTPStatIdleNum	Integer32
	hwPstnCTPStatOffhookNum	Integer32
	hwPstnCTPStatParkingNum	Integer32
	hwPstnCTPStatRingNum	Integer32
	hwMgPortStatInfoTotalNum	Integer32
	hwMgPortStatInfoUseableNum	Integer32
	hwMgPortStatInfoBusyNum	Integer32
	hwMgPortStatInfoFaultNum	Integer32
	hwMgPortStatInfoForbiddenNum	Integer32

HwBraCTPConfigEntry
SEQUENCE
	hwBraCTPConfigIndex	Integer32
	hwBraCTPMgId	Integer32
	hwBraCTPTerminationID	OCTET STRING
	hwBraCTPTelNo	OCTET STRING
	hwBraCTPLinkSetNo	Integer32
	hwBraCTPIuaIID	Integer32
	hwBraCTPRowStatus	RowStatus
	hwBraCTPPriorityFlag	INTEGER
	hwBraCTPLayerFlag	INTEGER
	hwBraCTPUniErrReport	INTEGER
	hwBraCTPAutoResumeLimit	Integer32
	hwBraCTPIuaTextIID	OCTET STRING
	hwBraCTPPowerDialerSupport	INTEGER
	hwBraCTPUserGroupid	Integer32
	hwBraCTPDigitMapGroupName	OCTET STRING
	hwBraCTPConfigIncomingcallChangeName	OCTET STRING
	hwBraCTPConfigOutgoingcallChangeName	OCTET STRING
	hwBraCTPConfigDefaultCli	OCTET STRING
	hwBraCTPConfigDefaultCliMode	INTEGER
	hwBraCTPConfigBearCapability	INTEGER
	hwBraCTPConfigCalledPartyNumType	INTEGER
	hwBraCTPConfigCalledPartyNumInternationalPrefixFlag	INTEGER
	hwBraCTPConfigCalledPartyNumNationalPrefixFlag	INTEGER

HwBraCTPOperEntry
SEQUENCE
	hwBraCTPOperIndex	Integer32
	hwBraCTPB1SrvState	INTEGER
	hwBraCTPB2SrvState	INTEGER
	hwBraCTPB1AdminState	INTEGER
	hwBraCTPB2AdminState	INTEGER
	hwBraCTPAdminOper	INTEGER
	hwBraCTPDState	INTEGER
	hwBraCTPB1SrvStateChange	TimeTicks
	hwBraCTPB2SrvStateChange	TimeTicks
	hwBraCTPB1AdminStateChange	TimeTicks
	hwBraCTPB2AdminStateChange	TimeTicks
	hwBraCTPDStateChange	TimeTicks
	hwBraCTPMaxCobTime	Integer32
	hwBraCTPOnexpire	INTEGER
	hwBraCTPAutoResumeTimes	Integer32

HwBraCTPStatisticsEntry
SEQUENCE
	hwBraCTPStatIndex	Integer32
	hwBraCTPStatTotalNum	Integer32
	hwBraCTPStatFaultNum	Integer32
	hwBraCTPStatIdleNum	Integer32
	hwBraCTPStatBusyNum	Integer32

HwPraCTPConfigEntry
SEQUENCE
	hwPraCTPConfigIndex	Integer32
	hwPraCTPMgId	Integer32
	hwPraCTPTerminationID	OCTET STRING
	hwPraCTPLinkSetNo	Integer32
	hwPraCTPIuaIID	Integer32
	hwPraCTPRowStatus	RowStatus
	hwPraCTPLayerFlag	INTEGER
	hwPraCTPPriorityFlag	INTEGER
	hwPraCTPUniErrReport	INTEGER
	hwPraCTPSubChnMask	BITS
	hwPraCTPTelNo	OCTET STRING
	hwPraCTPAutoResumeLimit	Integer32
	hwPraCTPIuaTextIID	OCTET STRING
	hwPraCTPPowerDialerSupport	INTEGER
	hwPraCTPUserGroupid	Integer32
	hwPraCTPDigitMapGroupName	OCTET STRING
	hwPraCTPConfigIncomingcallChangeName	OCTET STRING
	hwPraCTPConfigOutgoingcallChangeName	OCTET STRING
	hwPraCTPConfigDefaultCli	OCTET STRING
	hwPraCTPConfigDefaultCliMode	INTEGER
	hwPraCTPConfigBearCapability	INTEGER
	hwPraCTPConfigCalledPartyNumType	INTEGER
	hwPraCTPConfigCalledPartyNumInternationalPrefixFlag	INTEGER
	hwPraCTPConfigCalledPartyNumNationalPrefixFlag	INTEGER

HwPraCTPOperEntry
SEQUENCE
	hwPraCTPOperIndex	Integer32
	hwPraCTPBchnSrvState	OCTET STRING
	hwPraCTPBchnAdminState	OCTET STRING
	hwPraCTPAdminOper	INTEGER
	hwPraCTPDState	INTEGER
	hwPraCTPMaxCobTime	Integer32
	hwPraCTPOnexpire	INTEGER
	hwPraCTPAutoResumeTimes	Integer32

HwPortStateTraceOperEntry
SEQUENCE
	hwPortStateTraceOperFrameId	Integer32
	hwPortStateTraceOperType	INTEGER
	hwPortStateTraceOperReportType	Integer32

HwPmbsCTPConfigEntry
SEQUENCE
	hwPmbsCTPConfigIndex	Integer32
	hwPmbsCTPLinkSetNo	Integer32
	hwPmbsCTPluaIID	Integer32
	hwPmbsCTPRowStatus	RowStatus
	hwPmbsCTPIuaTextIID	OCTET STRING

HwPmbsCTPOperEntry
SEQUENCE
	hwPmbsCTPOperIndex	Integer32
	hwPmbsCTPPLinkState	BITS

HwPstnCTPRightConfigEntry
SEQUENCE
	hwPstnCTPRightConfigIndex	Integer32
	hwPstnCTPRightPortBindIndex	Integer32
	hwPstnCTPRightCallHold	INTEGER
	hwPstnCTPRightThreeParty	INTEGER
	hwPstnCTPRightConf	INTEGER
	hwPstnCTPRightCt	INTEGER
	hwPstnCTPRightCw	INTEGER
	hwPstnCTPRightMcid	INTEGER
	hwPstnCTPRightMwi	INTEGER
	hwPstnCTPRightTp	INTEGER
	hwPstnCTPRightCd	INTEGER
	hwPstnCTPRightUus1	INTEGER
	hwPstnCTPRightUus2	INTEGER
	hwPstnCTPRightUus3	INTEGER
	hwPstnCTPRightCentrexNo	Unsigned32
	hwPstnCTPRightCentrexPrefix	OCTET STRING
	hwPstnCTPRightCentrexFlag	INTEGER
	hwPstnCTPRightMwiMode	INTEGER
	hwPstnCTPRightHotTime	Integer32
	hwPstnCTPRightHotLineNum	OCTET STRING
	hwPstnCTPRightDialTone	INTEGER
	hwPstnCTPRightCfbNum	OCTET STRING
	hwPstnCTPRightCfuNum	OCTET STRING
	hwPstnCTPRightCfnrNum	OCTET STRING
	hwPstnCTPRightCfnrTime	Integer32
	hwPstnCTPRightAnonymousCall	INTEGER
	hwPstnCTPRightAuthName	OCTET STRING
	hwPstnCTPRightAuthPassword	OCTET STRING
	hwPstnCTPRightEndConfigIndex	Integer32
	hwPstnCTPRightAuthPasswordMode	INTEGER
	hwPstnCTPRightAuthHA1	OCTET STRING
	hwPstnCTPRightAutoReversePolarity	INTEGER
	hwPstnCTPRightDisplayNameMode	INTEGER
	hwPstnCTPRightDisplayName	OCTET STRING
	hwPstnCTPRightHotLine	INTEGER
	hwPstnCTPRightPermanentHold	INTEGER
	hwPstnCTPRightCutoffDisconnect	INTEGER
	hwPstnCTPRightSccClass	INTEGER
	hwPstnCTPRightPermanentHoldMode	INTEGER
	hwPstnCTPRightPermanentHoldTime	Integer32
	hwPstnCTPRightFastDisconnect	INTEGER
	hwPstnCTPRightDc	INTEGER

HwCTPExternNumberConfigEntry
SEQUENCE
	hwCTPExternNumberConfigIndex	Integer32
	hwCTPExternNumberPortBindIndex	Integer32
	hwCTPExternNumber	OCTET STRING
	hwCTPExternRowStatus	RowStatus
	hwCTPExternUserGroupid	Integer32

HwBraCTPRightConfigEntry
SEQUENCE
	hwBraCTPRightConfigIndex	Integer32
	hwBraCTPRightPortBindIndex	Integer32
	hwBraCTPRightAuthName	OCTET STRING
	hwBraCTPRightAuthPassword	OCTET STRING
	hwBraCTPRightEndConfigIndex	Integer32
	hwBraCTPRightAuthPasswordMode	INTEGER
	hwBraCTPRightAuthHA1	OCTET STRING
	hwBraCTPRightCentrexNo	Unsigned32
	hwBraCTPRightCentrexPrefix	OCTET STRING
	hwBraCTPRightCentrexFlag	INTEGER
	hwBraCTPRightMwiMode	INTEGER
	hwBraCTPRightCallHold	INTEGER
	hwBraCTPRightThreeParty	INTEGER
	hwBraCTPRightConf	INTEGER
	hwBraCTPRightCt	INTEGER
	hwBraCTPRightCw	INTEGER
	hwBraCTPRightMcid	INTEGER
	hwBraCTPRightMwi	INTEGER

HwPraCTPRightConfigEntry
SEQUENCE
	hwPraCTPRightConfigIndex	Integer32
	hwPraCTPRightPortBindIndex	Integer32
	hwPraCTPRightAuthName	OCTET STRING
	hwPraCTPRightAuthPassword	OCTET STRING
	hwPraCTPRightEndConfigIndex	Integer32
	hwPraCTPRightAuthPasswordMode	INTEGER
	hwPraCTPRightAuthHA1	OCTET STRING
	hwPraCTPRightCentrexNo	Unsigned32
	hwPraCTPRightCentrexPrefix	OCTET STRING
	hwPraCTPRightCentrexFlag	INTEGER
	hwPraCTPRightMwiMode	INTEGER

HwR2CTPConfigEntry
SEQUENCE
	hwR2CTPConfigIndex	Integer32
	hwR2CTPMgId	Integer32
	hwR2CTPTerminationID	OCTET STRING
	hwR2CTPSignalProfileIndex	Integer32
	hwR2CTPSignalProfileName	OCTET STRING
	hwR2CTPRowStatus	RowStatus
	hwR2CTPPriorityFlag	INTEGER
	hwR2CTPTelNo	OCTET STRING
	hwR2CTPUserGroupid	Integer32
	hwR2CTPDigitMapGroupName	OCTET STRING
	hwR2CTPRemoteRingFlag	INTEGER
	hwR2CTPConfigIncomingcallChangeName	OCTET STRING
	hwR2CTPConfigOutgoingcallChangeName	OCTET STRING

HwR2CTPOperEntry
SEQUENCE
	hwR2CTPOperIndex	Integer32
	hwR2CTPBchnSrvState	OCTET STRING
	hwR2CTPBchnAdminState	OCTET STRING
	hwR2CTPAdminOper	INTEGER
	hwR2CTPMaxCobTime	Integer32
	hwR2CTPOnexpire	INTEGER

HwR2CTPRightConfigEntry
SEQUENCE
	hwR2CTPRightConfigIndex	Integer32
	hwR2CTPRightPortBindIndex	Integer32
	hwR2CTPRightAuthName	OCTET STRING
	hwR2CTPRightAuthPassword	OCTET STRING
	hwR2CTPRightAuthPasswordMode	INTEGER
	hwR2CTPRightAuthHA1	OCTET STRING

Defined Values

hwIASVoiceUser		1.3.6.1.4.1.2011.6.112
This MIB module defines MIB objects which provides voice user management.
MODULE-IDENTITY

hwIASVoiceUserObjects		1.3.6.1.4.1.2011.6.112.1
OBJECT IDENTIFIER

hwIASVoiceUserTrapsVbOids		1.3.6.1.4.1.2011.6.112.2
OBJECT IDENTIFIER

hwIASVoiceUserTraps		1.3.6.1.4.1.2011.6.112.3
OBJECT IDENTIFIER

hwIASVoiceUserCommonTraps		1.3.6.1.4.1.2011.6.112.3.1
OBJECT IDENTIFIER

hwIASVoiceUserAlarmTraps		1.3.6.1.4.1.2011.6.112.3.2
OBJECT IDENTIFIER

hwIASVoiceUserPortTraps		1.3.6.1.4.1.2011.6.112.3.1.1
OBJECT IDENTIFIER

hwIASVoiceUserPortAlarmTraps		1.3.6.1.4.1.2011.6.112.3.2.1
OBJECT IDENTIFIER

hwIASVoiceUserTsnAlarmTraps		1.3.6.1.4.1.2011.6.112.3.2.2
OBJECT IDENTIFIER

hwPstnCTPConfigTable		1.3.6.1.4.1.2011.6.112.1.1
This table is used to add, delete, modify, and query the PSTN user. The index of this table is hwPstnCTPConfigIndex. The service attributes of a PSTN port include the gateway ID, terminal ID, telephone number, whether to support layering configuration, priority flag of the port for the overload control, user type, power-off interval, FSK delay interval, time for issuing the calling number, format for issuing the calling number, and limited pulse dialing. Through the table, you can configure, modify, and query the above-mentioned attributes of the PSTN user.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwPstnCTPConfigEntry

hwPstnCTPConfigEntry		1.3.6.1.4.1.2011.6.112.1.1.1
This table is used to add, delete, modify, and query the PSTN user. The index of this entry is hwPstnCTPConfigIndex. The service attributes of a PSTN port include the gateway ID, terminal ID, telephone number, whether to support layering configuration, priority flag of the port for the overload control, user type, power-off interval, FSK delay interval, time for issuing the calling number, format for issuing the calling number, and limited pulse dialing. Through the table, you can configure, modify, and query the above-mentioned attributes of the PSTN user.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwPstnCTPConfigEntry

hwPstnCTPConfigIndex		1.3.6.1.4.1.2011.6.112.1.1.1.1
Indicates the frame/slot/port. 24 0 0011000 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for PSTN port, must be 0x18 the next 8 bits indicate the frame ID, the next 6 bits indicate the slot ID, the next 7 bits indicate the port ID, the last 4 bits must be 0. The type of port include: E1 port = 0x16 PSTN port = 0x18 BRA port = 0x19 AT0 port = 0x1b
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hwPstnCTPMgId		1.3.6.1.4.1.2011.6.112.1.1.1.2
Indicates the MG ID.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..16777215

hwPstnCTPTerminationID		1.3.6.1.4.1.2011.6.112.1.1.1.3
Indicates the terminal ID (only the character string of digit type is supported).
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..64)

hwPstnCTPTelNo		1.3.6.1.4.1.2011.6.112.1.1.1.4
Indicates the telephone number.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..64)

hwPstnCTPRowStatus		1.3.6.1.4.1.2011.6.112.1.1.1.5
Indicates the row status.The operations include activate, shut down, not start, create and register, create and wait, and delete. The operations are not used in the V8R61.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

hwPstnCTPLayerFlag		1.3.6.1.4.1.2011.6.112.1.1.1.6
Indicates whether to layer. Options: 1. noLayer(1) -not to layer 2. layer(2) -to layer 3. null(-1) -invalid value
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	noLayer(1), layer(2), null(-1)

hwPstnCTPPriorityFlag		1.3.6.1.4.1.2011.6.112.1.1.1.7
Indicates the priority of the terminal. Options: 1. cat1(1) -the highest priority 2. cat2(2) -the middle priority 3. cat3(3) -the lowest priority
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	cat1(1), cat2(2), cat3(3)

hwPstnCTPPotsLineType		1.3.6.1.4.1.2011.6.112.1.1.1.8
Indicates the subscriber type. Options: 1. del(1) -DEL 2. lcPBX(2) -Loop Calling PBX 3. ecPBX(3) -earth calling PBX 4. payPhone(4) -PayPhone
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	del(1), lcPBX(2), ecPBX(3), payPhone(4)

hwPstnCTPDCTime		1.3.6.1.4.1.2011.6.112.1.1.1.9
Indicates the disconnect clear interval. Unit: 10ms
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	10..100

hwPstnCTPFSKDelayInterval		1.3.6.1.4.1.2011.6.112.1.1.1.10
Indicates the FSK delay interval. Unit: 10ms
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..100

hwPstnCTPCidTransWhen		1.3.6.1.4.1.2011.6.112.1.1.1.11
Indicates the time for delivering the caller ID. Options: 1. afterRing(1) -transmit CID after ringing 2. beforeRing(2) -transmit CID before ringing
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	afterRing(1), beforeRing(2)

hwPstnCTPCidFormat		1.3.6.1.4.1.2011.6.112.1.1.1.12
Indicates the format of the caller ID. Options: 1. sdmfFsk(1) -SDMF FSK format 2. mdmfFsk(2) -MDMF FSK format 3. dtmf(3) -DTMF format 4. russia(4) -russia format 5. etsi(5) -etsi format
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	sdmfFsk(1), mdmfFsk(2), dtmf(3), russia(4), etsi(5)

hwPstnCTPVQEAgc		1.3.6.1.4.1.2011.6.112.1.1.1.13
Indicates enable AGC or not. Options: 1. enable(1) -enable AGC 2. disable(2) -disable AGC
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwPstnCTPVQESns		1.3.6.1.4.1.2011.6.112.1.1.1.14
Indicates enable SNS or not. Options: 1. enable(1) -enable SNS 2. disable(2) -disable SNS
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwPstnCTPVQEAgcLevel		1.3.6.1.4.1.2011.6.112.1.1.1.15
Indicates set AGC target value. Unit: dbm0
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	-24..-9

hwPstnCTPVQESnsLevel		1.3.6.1.4.1.2011.6.112.1.1.1.16
Indicates set VQE noise suppression level. Unit: db
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	6..20

hwPstnCTPDspInputGain		1.3.6.1.4.1.2011.6.112.1.1.1.17
Dsp input gain. 1: -10db 2: -9db 3: -8db 4: -7db 5: -6db 6: -5db 7: -4db 8: -3db 9: -2db 10: -1db 11: 0db 12: 1db 13: 2db 14: 3db 15: 4db 16: 5db Unit: db
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..16

hwPstnCTPDspOutputGain		1.3.6.1.4.1.2011.6.112.1.1.1.18
Dsp output gain. 1: -10db 2: -9db 3: -8db 4: -7db 5: -6db 6: -5db 7: -4db 8: -3db 9: -2db 10: -1db 11: 0db 12: 1db 13: 2db 14: 3db 15: 4db 16: 5db 17: 6db 18: 7db 19: 8db 20: 9db 21: 10db Unit: db
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..21

hwPstnCTPDetectANSbarBySingleToneFlag		1.3.6.1.4.1.2011.6.112.1.1.1.19
It indicates whether the ANSbar signal detected by SingleTone is supported. Options: 1. enable(1) -the ANSbar signal detected by SingleTone is supported 2. disable(2) -the ANSbar signal detected by SingleTone is not supported
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwPstnCTPBellANSFlag		1.3.6.1.4.1.2011.6.112.1.1.1.20
It indicates whether the Bell ANS is supported. Options: 1. enable(1) -the Bell ANS is supported 2. disable(2) -the Bell ANS is not supported
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwPstnCTPDspParaTemplate		1.3.6.1.4.1.2011.6.112.1.1.1.21
The index of dsp parameter template name.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..31)

hwPstnCTPCidFskMode		1.3.6.1.4.1.2011.6.112.1.1.1.22
It indicates the mode of fsk. Options: 1. bell202(1) -bell 202 2. ccittv23(2) -ccitt v23 3. ntt(3) -ntt
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	bell202(1), ccittv23(2), ntt(3)

hwPstnCTPCidTasPattern		1.3.6.1.4.1.2011.6.112.1.1.1.23
It indicates the mode of tas. Options: 1. noTas(1) -no tas 2. dtAs(2) -DT as
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	noTas(1), dtAs(2)

hwPstnCTPUserGroupid		1.3.6.1.4.1.2011.6.112.1.1.1.24
It indicates the user group ID. -1 indicates clear the user group info.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	-1..65535

hwPstnCTPDigitMapGroupName		1.3.6.1.4.1.2011.6.112.1.1.1.25
It indicates the digitmap group name.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwPstnCTPForceSendFsk		1.3.6.1.4.1.2011.6.112.1.1.1.26
Indicates enable force send FSK or not. Options: 1. enable(1) -enable force send FSK 2. disable(2) -disable force send FSK
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwPstnCTPFSKAlertInterval		1.3.6.1.4.1.2011.6.112.1.1.1.27
It indicates fskend to alert Interval. -1 indicate invalid value. Unit: 10ms
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..100 | -1

hwPstnCTPConfigDefaultCli		1.3.6.1.4.1.2011.6.112.1.1.1.28
It indicates the default cli number of outgoing call.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..64)

hwPstnCTPEOCTime		1.3.6.1.4.1.2011.6.112.1.1.1.29
Indicates the end of call interval. Unit: 10ms
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	10..100

hwPstnCTPRemoteBlockPowerDeny		1.3.6.1.4.1.2011.6.112.1.1.1.30
Indicates the flag of remote block power deny. Options: 1. enable(1) - enable remote block power deny 2. disable(2) - disable remote block power deny
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwPstnCTPOperTable		1.3.6.1.4.1.2011.6.112.1.2
It is used to maintain PSTN ports with the VSP feature. The index of this table is hwPstnCTPOperIndex. Through the table, you can query the states of PSTN ports, including the running status of the PSTN service, management status of the PSTN service, change time of the running status of the PSTN service, and change time of the management status of the PSTN service. Through the table, services on the PSTN port can be terminated, started, and the service status can be queried.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwPstnCTPOperEntry

hwPstnCTPOperEntry		1.3.6.1.4.1.2011.6.112.1.2.1
It is used to maintain PSTN ports with the VSP feature. The index of this entry is hwPstnCTPOperIndex. Through the table, you can query the states of PSTN ports, including the running status of the PSTN service, management status of the PSTN service, change time of the running status of the PSTN service, and change time of the management status of the PSTN service. Through the table, services on the PSTN port can be terminated, started, and the service status can be queried.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwPstnCTPOperEntry

hwPstnCTPOperIndex		1.3.6.1.4.1.2011.6.112.1.2.1.1
Indicates the frame/slot/port. 24 0 0011000 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for PSTN port, must be 0x18 the next 8 bits indicate the frame ID, the next 6 bits indicate the slot ID, the next 7 bits indicate the port ID, the last 4 bits must be 0. The type of port include: E1 port = 0x16 PSTN port = 0x18 BRA port = 0x19 AT0 port = 0x1b
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hwPstnCTPSrvState		1.3.6.1.4.1.2011.6.112.1.2.1.2
Indicates the running status of the service layer of the PSTN port. Options: 1. fault(1)-the port is fault 2. idle(2) -the user is idle 3. offHook(3) -the user off-hook 4. lock(4) -the user is locked 5. ring(5) -the user is ringing
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	fault(1), idle(2), offHook(3), lock(4), ring(5)

hwPstnCTPAdminState		1.3.6.1.4.1.2011.6.112.1.2.1.3
Indicates the administration status of the service layer of the PSTN port. Options: 1. blockedLocally(1) -the service is blocked cause of the local reason 2. blockedRemotely(2) -the service is blocked cause of the remote reason 3. inService(3) -the service is normal 4. shuttingDown(4) -the service is shutting down 5. delayTest(5) -the user is waiting for testing
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	blockedLocally(1), blockedRemotely(2), inService(3), shuttingDown(4), delayTest(5)

hwPstnCTPAdminOper		1.3.6.1.4.1.2011.6.112.1.2.1.4
Indicates the maintenance operation of the service layer of the PSTN port. Options: 1. endService(1) -stop service 2. startService(2) -start service 3. deferEndingService(3) -stop service gracefully
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	endService(1), startService(2), deferEndingService(3)

hwPstnCTPSrvStateChange		1.3.6.1.4.1.2011.6.112.1.2.1.5
Indicates the service running status changing time of the PSTN port.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

hwPstnCTPAdminStateChange		1.3.6.1.4.1.2011.6.112.1.2.1.6
Indicates the service administration status changing time of the PSTN port.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

hwPstnCTPMaxCobTime		1.3.6.1.4.1.2011.6.112.1.2.1.7
Length of waiting timer for pstn user defer end service. 0 is not allowed to set. Default: 240 Unit: minute
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..1440

hwPstnCTPOnexpire		1.3.6.1.4.1.2011.6.112.1.2.1.8
Indicates disposal mode when pstn user defer end service timeout. Options: 1. force(1) -force user to end service when end-service timeout 2. cancel(2) -cancel end service when end-service timeout Default: force(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	force(1), cancel(2)

hwPstnCTPRegState		1.3.6.1.4.1.2011.6.112.1.2.1.9
Indicates the register status of the PSTN port. Options: 1.initializing(1) - the user has not send register request 2.registering(2) - the user has send register request and is waiting for response 3.failRegistered(3) - the user received failed response or register timeout 4.unregistering(4) - the user is unregistering 5.active(5) - the user is actived 6.deactive(6) - the user is deactived 7. invalidusertype(7) -- the user is not SIP user
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	initializing(1), registering(2), failRegistered(3), unregistering(4), active(5), deactive(6), invalidusertype(7)

hwPstnCTPCallState		1.3.6.1.4.1.2011.6.112.1.2.1.10
Indicates the register status of the PSTN port. Options: 1. idle(1)- there is no call on the user 2. offhook(2)- the user hung up 3. dialing(3)- the user is dialing 4.establishing(4)- the call is establishing 5.ringing(5)- the phone is ringing 6.ringback(6)- the phone is ringback 7.connecting(7)- the call is connecting 8.connected(8)- the call is connected 9.hold(9)- the call is hold 10.disconnecting(10)- the call is disconnecting 11.locked(11)- the port is locked 12. invalidusertype(12) -- the user is not SIP user
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	idle(1), offhook(2), dialing(3), establishing(4), ringing(5), ringback(6), connecting(7), connected(8), hold(9), disconnecting(10), locked(11), invalidusertype(12)

hwPstnCTPCallWaitState		1.3.6.1.4.1.2011.6.112.1.2.1.11
Indicates the register status of the PSTN port. Options: 1. disable(1)- the service is disable 2. idle(2)- the is no callwaiting services 3. secondaryRinging(3)- the second part is ringing 4. secondaryConnecting(4)- the second part is connecting 5. secondaryConnected(5)- the second part is connected 6. secondaryDisconnecting(6)- the second part is disconnecting 7. invalidusertype(7) -- the user is not SIP user
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disable(1), idle(2), secondaryRinging(3), secondaryConnecting(4), secondaryConnected(5), secondaryDisconnecting(6), invalidusertype(7)

hwMgPortStatisticsInfoTable		1.3.6.1.4.1.2011.6.112.1.3
This table is used to query the statistics of the MG service ports. The index of this table is hwMgPortStatInfoIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwMgPortStatisticsInfoEntry

hwMgPortStatisticsInfoEntry		1.3.6.1.4.1.2011.6.112.1.3.1
This table is used to query the statistics of the MG service ports. The index of this entry is hwMgPortStatInfoIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwMgPortStatisticsInfoEntry

hwMgPortStatInfoIndex		1.3.6.1.4.1.2011.6.112.1.3.1.1
Indicates the frame ID. The GetNext (walk) operation is to collect the statistics of each specified shelf of the system. In the Get operation, if hwMgPortStatIndex is all F, the operation is to collect the statistics of the entire system; if hwMgPortStatIndex is not all F, the operation is to collect the statistics of the specified shelf.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hwPstnCTPStatTotalNum		1.3.6.1.4.1.2011.6.112.1.3.1.2
Indicates the total number of the MGPSTN service ports.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwPstnCTPStatFaultNum		1.3.6.1.4.1.2011.6.112.1.3.1.3
Indicates the number of the MGPSTN faulty ports.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwPstnCTPStatIdleNum		1.3.6.1.4.1.2011.6.112.1.3.1.4
Indicates the number of the MGPSTN idle ports.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwPstnCTPStatOffhookNum		1.3.6.1.4.1.2011.6.112.1.3.1.5
Indicates the number of the MGPSTN off-hooked ports.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwPstnCTPStatParkingNum		1.3.6.1.4.1.2011.6.112.1.3.1.6
Indicates the number of the MGPSTN locked ports.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwPstnCTPStatRingNum		1.3.6.1.4.1.2011.6.112.1.3.1.7
Indicates the number of the MGPSTN ringing ports.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwMgPortStatInfoTotalNum		1.3.6.1.4.1.2011.6.112.1.3.1.8
Indicates the total number of the MG service ports.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwMgPortStatInfoUseableNum		1.3.6.1.4.1.2011.6.112.1.3.1.9
Indicates the number of the MG idle ports.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwMgPortStatInfoBusyNum		1.3.6.1.4.1.2011.6.112.1.3.1.10
Indicates the number of the MG busy ports.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwMgPortStatInfoFaultNum		1.3.6.1.4.1.2011.6.112.1.3.1.11
Indicates the number of the MG faulty ports.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwMgPortStatInfoForbiddenNum		1.3.6.1.4.1.2011.6.112.1.3.1.12
Indicates the number of the MG blocked ports.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwBraCTPConfigTable		1.3.6.1.4.1.2011.6.112.1.4
It is used to configure the service attributes of a BRA port. It is used to add, delete, modify, and query the ISDN user with the VoIP feature. The index of this table is hwBraCTPConfigIndex. The attributes of an ISDN user with the VoIP feature include the gateway ID, terminal ID, IUA link group, interface ID, and telephone number. Through the table, you can configure, modify, and query the above-mentioned attributes of the BRA user.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwBraCTPConfigEntry

hwBraCTPConfigEntry		1.3.6.1.4.1.2011.6.112.1.4.1
It is used to configure the service attributes of a BRA port. It is used to add, delete, modify, and query the ISDN user with the VoIP feature. The index of this entry is hwBraCTPConfigIndex. The attributes of an ISDN user with the VoIP feature include the gateway ID, terminal ID, IUA link group, interface ID, and telephone number. Through the table, you can configure, modify, and query the above-mentioned attributes of the BRA user.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwBraCTPConfigEntry

hwBraCTPConfigIndex		1.3.6.1.4.1.2011.6.112.1.4.1.1
Indicates the frame/slot/port. 25 0 0011001 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for BRA port, must be 0x19 the next 8 bits indicate the frame ID, the next 6 bits indicate the slot ID, the next 7 bits indicate the port ID, the last 4 bits must be 0. The type of port include: E1 port = 0x16 PSTN port = 0x18 BRA port = 0x19 AT0 port = 0x1b
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hwBraCTPMgId		1.3.6.1.4.1.2011.6.112.1.4.1.2
Indicates the MG ID.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..16777215

hwBraCTPTerminationID		1.3.6.1.4.1.2011.6.112.1.4.1.3
Indicates the start terminal ID (only the character string of digit type is supported).
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..64)

hwBraCTPTelNo		1.3.6.1.4.1.2011.6.112.1.4.1.4
Indicates the BRA telephone number.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..64)

hwBraCTPLinkSetNo		1.3.6.1.4.1.2011.6.112.1.4.1.5
Indicates the link set to which the BRA terminal belongs (the value range depends on the product specifications).
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hwBraCTPIuaIID		1.3.6.1.4.1.2011.6.112.1.4.1.6
Indicates the interface ID of the BRA terminal. -1 means this parameter is not used.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	-1 | 0..65535

hwBraCTPRowStatus		1.3.6.1.4.1.2011.6.112.1.4.1.7
Indicates the row status.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

hwBraCTPPriorityFlag		1.3.6.1.4.1.2011.6.112.1.4.1.8
Indicates the priority of the terminal. Options: 1. cat1(1) -the highest priority 2. cat2(2) -the middle priority 3. cat3(3) -the lowest priority Default: cat3(3)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	cat1(1), cat2(2), cat3(3)

hwBraCTPLayerFlag		1.3.6.1.4.1.2011.6.112.1.4.1.9
Indicates whether to layer. Options: 1. noLayer(1) -not to layer 2. layer(2) -to layer 3. null(-1) -invalid value
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	noLayer(1), layer(2), null(-1)

hwBraCTPUniErrReport		1.3.6.1.4.1.2011.6.112.1.4.1.10
UNI fault report flag of bra user. Options: 1. disable(1) -disable 2. enable(2) -enable Default: disable(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

hwBraCTPAutoResumeLimit		1.3.6.1.4.1.2011.6.112.1.4.1.11
Indicates auto resume times threshold of bra user. Default: 20
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..255

hwBraCTPIuaTextIID		1.3.6.1.4.1.2011.6.112.1.4.1.12
Use the text to indicate the interface ID of the BRA terminal. Config area 0~65535. Display area 0~53.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..51)

hwBraCTPPowerDialerSupport		1.3.6.1.4.1.2011.6.112.1.4.1.13
Powerdialer support flag of bra user. Options: 1. enable(1) -enable 2. disable(2) -disable Default: enable(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwBraCTPUserGroupid		1.3.6.1.4.1.2011.6.112.1.4.1.14
It indicates the user group ID. -1 indicates clear the user group info.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	-1..65535

hwBraCTPDigitMapGroupName		1.3.6.1.4.1.2011.6.112.1.4.1.15
It indicates the digitmap group name.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwBraCTPConfigIncomingcallChangeName		1.3.6.1.4.1.2011.6.112.1.4.1.16
It indicates the number change of incomging call name.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwBraCTPConfigOutgoingcallChangeName		1.3.6.1.4.1.2011.6.112.1.4.1.17
It indicates the number change of outgoing call name.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwBraCTPConfigDefaultCli		1.3.6.1.4.1.2011.6.112.1.4.1.18
It indicates the default cli number of outgoing call.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..64)

hwBraCTPConfigDefaultCliMode		1.3.6.1.4.1.2011.6.112.1.4.1.19
Indicates the mode of cli number. Options: 1. match(1) - match 2. overwrite(2) -overwrite 3. null(-1) -invalid value Default: match(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	match(1), overwrite(2), null(-1)

hwBraCTPConfigBearCapability		1.3.6.1.4.1.2011.6.112.1.4.1.20
Indicates the bearCapability of bra user. Options: 1. speech(1) -speech 2. audio(2) -3.1k-audio 3. speechOraudio(3) -speech or 3.1k-audio 3. null(-1) -invalid value Default: speechOraudio(3)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	speech(1), audio(2), speechOraudio(3), null(-1)

hwBraCTPConfigCalledPartyNumType		1.3.6.1.4.1.2011.6.112.1.4.1.21
Indicates the type of called party number. Options: 1. unknown(1) -unknown 2. national(2) -national 3. auto(3) -auto 4. international(4) -international 5. subscriber(5) -subscriber 6. null(-1) -invalid value Default: unknown(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	unknown(1), national(2), auto(3), international(4), subscriber(5), null(-1)

hwBraCTPConfigCalledPartyNumInternationalPrefixFlag		1.3.6.1.4.1.2011.6.112.1.4.1.22
Indicates whether to add prefix on international number. Options: 1. enable(1) -enable 2. disable(2) -disable 3. null(-1) -invalid value Default: disable(2)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2), null(-1)

hwBraCTPConfigCalledPartyNumNationalPrefixFlag		1.3.6.1.4.1.2011.6.112.1.4.1.23
Indicates whether to add prefix on national number. Options: 1. enable(1) -enable 2. disable(2) -disable 3. null(-1) -invalid value Default: disable(2)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2), null(-1)

hwBraCTPOperTable		1.3.6.1.4.1.2011.6.112.1.5
It is used to perform operations on service attributes of a BRA port. Through this table, you can perform maintenance operations on an ISDN user with the VSP feature. The index of this table is hwBraCTPOperIndex. Different from the MG PSTN port, a BRA port contains two B channels and occupies two terminal IDs; however, only one terminal ID needs to be configured and this ID must be an even number. Then, the terminal ID in odd is allocated to the BRA port by default. Through this table, you can query the running status of the BRA B1/B2 service, management status of the BRA B1/B2 service, status of the BRA D channel, change time of the running status of the BRA B1/B2 service, and change time of the management status of the BRA B1/B2 service. Through the table, services on the BRA port can be terminated, started, and the service status can be queried.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwBraCTPOperEntry

hwBraCTPOperEntry		1.3.6.1.4.1.2011.6.112.1.5.1
It is used to perform operations on service attributes of a BRA port. Through this table, you can perform maintenance operations on an ISDN user with the VSP feature. The index of this entry is hwBraCTPOperIndex. Different from the MG PSTN port, a BRA port contains two B channels and occupies two terminal IDs; however, only one terminal ID needs to be configured and this ID must be an even number. Then, the terminal ID in odd is allocated to the BRA port by default. Through this table, you can query the running status of the BRA B1/B2 service, management status of the BRA B1/B2 service, status of the BRA D channel, change time of the running status of the BRA B1/B2 service, and change time of the management status of the BRA B1/B2 service. Through the table, services on the BRA port can be terminated, started, and the service status can be queried.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwBraCTPOperEntry

hwBraCTPOperIndex		1.3.6.1.4.1.2011.6.112.1.5.1.1
Indicates the frame/slot/port. 25 0 0011001 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for BRA port, must be 0x19 the next 8 bits indicate the frame ID, the next 6 bits indicate the slot ID, the next 7 bits indicate the port ID, the last 4 bits must be 0. The type of port include: E1 port = 0x16 PSTN port = 0x18 BRA port = 0x19 AT0 port = 0x1b
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hwBraCTPB1SrvState		1.3.6.1.4.1.2011.6.112.1.5.1.2
Indicates the running status of the service layer of the BRA B1 channel. Options: 1. idle(1) -the user is idle 2. busy(2) -the user is busy 3. fault(3) -the port is fault
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	idle(1), busy(2), fault(3)

hwBraCTPB2SrvState		1.3.6.1.4.1.2011.6.112.1.5.1.3
Indicates the running status of the service layer of the BRA B2 channel. Options: 1. idle(1) -the user is idle 2. busy(2) -the user is busy 3. fault(3) -the port is fault
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	idle(1), busy(2), fault(3)

hwBraCTPB1AdminState		1.3.6.1.4.1.2011.6.112.1.5.1.4
Indicates the administration status of the service layer of the BRA B1 channel. Options: 1. blockedLocally(1) -the service is blocked cause of local reason 2. blockedRemotely(2) -the service is blocked cause of remote reason 3. inService(3) -the service is normal 4. shuttingDown(4) -the service is shutting down
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	blockedLocally(1), blockedRemotely(2), inService(3), shuttingDown(4)

hwBraCTPB2AdminState		1.3.6.1.4.1.2011.6.112.1.5.1.5
Indicates the administration status of the service layer of the BRA B2 channel. Options: 1. blockedLocally(1) -the service is blocked cause of local reason 2. blockedRemotely(2) -the service is blocked cause of remote reason 3. inService(3) -the service is normal 4. shuttingDown(4) -the service is shutting down
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	blockedLocally(1), blockedRemotely(2), inService(3), shuttingDown(4)

hwBraCTPAdminOper		1.3.6.1.4.1.2011.6.112.1.5.1.6
Indicates the maintenance operation of the service layer of the BRA port. Options: 1. endService(1) -stop service 2. startService(2) -start service 3. deferEndingService(3) -stop service gracefully
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	endService(1), startService(2), deferEndingService(3)

hwBraCTPDState		1.3.6.1.4.1.2011.6.112.1.5.1.7
Indicates the status of the BRA D channel. Options: 1. established(1) -established 2. block(2) -blocked 3. notConstruct(3) -unestablished 4. teiAlloced(4) -TEI is alloced 5. teiNotAlloced(5) -TEI is not alloced
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	established(1), block(2), notConstruct(3), teiAlloced(4), teiNotAlloced(5)

hwBraCTPB1SrvStateChange		1.3.6.1.4.1.2011.6.112.1.5.1.8
Indicates the service running status changing time of the BRA B1 channel.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

hwBraCTPB2SrvStateChange		1.3.6.1.4.1.2011.6.112.1.5.1.9
Indicates the service running status changing time of the BRA B2 channel.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

hwBraCTPB1AdminStateChange		1.3.6.1.4.1.2011.6.112.1.5.1.10
Indicates the service administration status changing time of the BRA B1 channel.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

hwBraCTPB2AdminStateChange		1.3.6.1.4.1.2011.6.112.1.5.1.11
Indicates the service administration status changing time of the BRA B2 channel.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

hwBraCTPDStateChange		1.3.6.1.4.1.2011.6.112.1.5.1.12
Indicates the status changing time of the BRA D channel.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

hwBraCTPMaxCobTime		1.3.6.1.4.1.2011.6.112.1.5.1.13
Indicates the length of waiting timer for bra user defer end service. 0 is not allowed to set. Default:240 Unit: minute
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..1440

hwBraCTPOnexpire		1.3.6.1.4.1.2011.6.112.1.5.1.14
Indicates the disposal mode when bra user defer end service timeout. Options: 1. force(1) -force user to end service 2. cancel(2) -cancel user's end service Default: force(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	force(1), cancel(2)

hwBraCTPAutoResumeTimes		1.3.6.1.4.1.2011.6.112.1.5.1.15
Indicates the auto resume times of bra user.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..255

hwBraCTPStatisticsTable		1.3.6.1.4.1.2011.6.112.1.6
This table is used to query the statistics of the MG-BRA service ports. The index of this table is hwBraCTPStatIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwBraCTPStatisticsEntry

hwBraCTPStatisticsEntry		1.3.6.1.4.1.2011.6.112.1.6.1
This table is used to query the statistics of the MG-BRA service ports. The index of this entry is hwBraCTPStatIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwBraCTPStatisticsEntry

hwBraCTPStatIndex		1.3.6.1.4.1.2011.6.112.1.6.1.1
Indicates the frame ID. The GetNext (walk) operation is to collect the statistics of each specified shelf of the system. In the Get operation, if hwMgPortStatIndex is all F, the operation is to collect the statistics of the entire system; if hwMgPortStatIndex is not all F, the operation is to collect the statistics of the specified shelf.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hwBraCTPStatTotalNum		1.3.6.1.4.1.2011.6.112.1.6.1.2
Indicates the total number of the MGBRA service ports.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwBraCTPStatFaultNum		1.3.6.1.4.1.2011.6.112.1.6.1.3
Indicates the number of faulty ports.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwBraCTPStatIdleNum		1.3.6.1.4.1.2011.6.112.1.6.1.4
Indicates the number of idle ports.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwBraCTPStatBusyNum		1.3.6.1.4.1.2011.6.112.1.6.1.5
Indicates the number of busy ports.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwPraCTPConfigTable		1.3.6.1.4.1.2011.6.112.1.7
It is used to configure the service attributes of a PRA port. It is used to add, delete, modify, and query the PRA user with the VSP feature. The index of this table is the hwPraCTPConfigIndex. The attributes of a PRA user with the VoIP feature include the gateway ID, start terminal ID, IUA link group, and interface ID. Through the table, you can configure, modify, and query the above-mentioned attributes of the PRA user.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwPraCTPConfigEntry

hwPraCTPConfigEntry		1.3.6.1.4.1.2011.6.112.1.7.1
It is used to configure the service attributes of a PRA port. It is used to add, delete, modify, and query the PRA user with the VSP feature. The index of this entry is the hwPraCTPConfigIndex. The attributes of a PRA user with the VoIP feature include the gateway ID, start terminal ID, IUA link group, and interface ID. Through the table, you can configure, modify, and query the above-mentioned attributes of the PRA user.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwPraCTPConfigEntry

hwPraCTPConfigIndex		1.3.6.1.4.1.2011.6.112.1.7.1.1
Indicates the frame/slot/port. 22 0 0010110 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for E1 port, must be 0x16 the next 8 bits indicate the frame ID, the next 6 bits indicate the slot ID, the next 7 bits indicate the port ID, the last 4 bits must be 0. The type of port include: E1 port = 0x16 PSTN port = 0x18 BRA port = 0x19 AT0 port = 0x1b
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hwPraCTPMgId		1.3.6.1.4.1.2011.6.112.1.7.1.2
Indicates the MG ID.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..16777215

hwPraCTPTerminationID		1.3.6.1.4.1.2011.6.112.1.7.1.3
Indicates the start terminal ID (only the character string of digit type is supported).
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..64)

hwPraCTPLinkSetNo		1.3.6.1.4.1.2011.6.112.1.7.1.4
Indicates the link set to which the PRA terminal belongs (the value range depends on the product specifications).
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hwPraCTPIuaIID		1.3.6.1.4.1.2011.6.112.1.7.1.5
Indicates the interface ID of the PRA terminal. -1 means this parameter is not used.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	-1 | 0..65535

hwPraCTPRowStatus		1.3.6.1.4.1.2011.6.112.1.7.1.6
Indicates the row status.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

hwPraCTPLayerFlag		1.3.6.1.4.1.2011.6.112.1.7.1.7
Indicates whether to layer. Options: 1. noLayer(1) -not to layer 2. layer(2) -to layer 3. null(-1) -invalid value
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	noLayer(1), layer(2), null(-1)

hwPraCTPPriorityFlag		1.3.6.1.4.1.2011.6.112.1.7.1.8
Indicates terminal priority. Options: 1. cat1(1) -the highest priority 2. cat2(2) -the middle priority 3. cat3(3) -the lowest priority Default: cat3(3)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	cat1(1), cat2(2), cat3(3)

hwPraCTPUniErrReport		1.3.6.1.4.1.2011.6.112.1.7.1.9
Indicates UNI fault report flag of e1 port. Options: 1. disable(1) -disable UNI fault report of e1 port 2. enable(2) -enable UNI fault report of e1 port Default: disable(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

hwPraCTPSubChnMask		1.3.6.1.4.1.2011.6.112.1.7.1.10
Indicates from left to right, each bit indicates enable one sub channel(0-31) or not, 0 means disable, 1 means enable, sub channel 0 and 16 must enable. Default: 11111111111111111111111111111111
Status: current	Access: read-write
OBJECT-TYPE
	BITS	bchn0(0), bchn1(1), bchn2(2), bchn3(3), bchn4(4), bchn5(5), bchn6(6), bchn7(7), bchn8(8), bchn9(9), bchn10(10), bchn11(11), bchn12(12), bchn13(13), bchn14(14), bchn15(15), bchn16(16), bchn17(17), bchn18(18), bchn19(19), bchn20(20), bchn21(21), bchn22(22), bchn23(23), bchn24(24), bchn25(25), bchn26(26), bchn27(27), bchn28(28), bchn29(29), bchn30(30), bchn31(31)

hwPraCTPTelNo		1.3.6.1.4.1.2011.6.112.1.7.1.11
Indicates telphone number.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..64)

hwPraCTPAutoResumeLimit		1.3.6.1.4.1.2011.6.112.1.7.1.12
Indicates auto resume times threshold of pra user. Default: 20
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..255

hwPraCTPIuaTextIID		1.3.6.1.4.1.2011.6.112.1.7.1.13
Use the text to indicate the interface ID of the PRA terminal.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..51)

hwPraCTPPowerDialerSupport		1.3.6.1.4.1.2011.6.112.1.7.1.14
Powerdialer support flag of pra user. Options: 1. enable(1) -support power dialer 2. disable(2) -not support power dialer Default: enable(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwPraCTPUserGroupid		1.3.6.1.4.1.2011.6.112.1.7.1.15
It indicates the user group ID. -1 indicates clear the user group info.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	-1..65535

hwPraCTPDigitMapGroupName		1.3.6.1.4.1.2011.6.112.1.7.1.16
It indicates the digitmap group name.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwPraCTPConfigIncomingcallChangeName		1.3.6.1.4.1.2011.6.112.1.7.1.17
It indicates the number change name of incoming call.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwPraCTPConfigOutgoingcallChangeName		1.3.6.1.4.1.2011.6.112.1.7.1.18
It indicates the number change name of outgoing call.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwPraCTPConfigDefaultCli		1.3.6.1.4.1.2011.6.112.1.7.1.19
It indicates the default cli number of outgoing call.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..64)

hwPraCTPConfigDefaultCliMode		1.3.6.1.4.1.2011.6.112.1.7.1.20
Indicates the mode of cli number. Options: 1. match(1) -match 2. overwrite(2) -overwrite 3. null(0) -invalid value Default: match(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	match(1), overwrite(2), null(0)

hwPraCTPConfigBearCapability		1.3.6.1.4.1.2011.6.112.1.7.1.21
Indicates the bearCapability of pra user. Options: 1. speech(1) -speech 2. audio(2) -3.1k-audio 3. speechOraudio(3) -speech or 3.1k-audio 4. null(0) -invalid value Default: speechOraudio(3)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	speech(1), audio(2), speechOraudio(3), null(0)

hwPraCTPConfigCalledPartyNumType		1.3.6.1.4.1.2011.6.112.1.7.1.22
Indicates the type of called party number. Options: 1. unknown(1) -unknown 2. national(2) -national 3. auto(3) -auto 4. international(4) -international 5. subscriber(5) -subscriber 6. null(0) -invalid value Default: unknown(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	unknown(1), national(2), auto(3), international(4), subscriber(5), null(0)

hwPraCTPConfigCalledPartyNumInternationalPrefixFlag		1.3.6.1.4.1.2011.6.112.1.7.1.23
Indicates whether to add prefix on international number. Options: 1. enable(1) -enable 2. disable(2) -disable 3. null(0) -invalid value Default: disable(2)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2), null(0)

hwPraCTPConfigCalledPartyNumNationalPrefixFlag		1.3.6.1.4.1.2011.6.112.1.7.1.24
Indicates whether to add prefix on national number. Options: 1. enable(1) -enable 2. disable(2) -disable 3. null(0) -invalid value Default: disable(2)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2), null(0)

hwPraCTPOperTable		1.3.6.1.4.1.2011.6.112.1.8
It is used to perform operations on service attributes of a PRA port. Through this table, you can perform maintenance operations on a PRA user with the VSP feature. The index of this table is hwPraCTPOperIndex. Through this table, you can query the running status of 32 B channels of the PRA service, management status of 32 B channels of the PRA service, and status of the PRA D channel. Through the table, services on the PRA port can be terminated, started, and the service status can be queried.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwPraCTPOperEntry

hwPraCTPOperEntry		1.3.6.1.4.1.2011.6.112.1.8.1
It is used to perform operations on service attributes of a PRA port. Through this table, you can perform maintenance operations on a PRA user with the VSP feature. The index of this entry is hwPraCTPOperIndex. Through this table, you can query the running status of 32 B channels of the PRA service, management status of 32 B channels of the PRA service, and status of the PRA D channel. Through the table, services on the PRA port can be terminated, started, and the service status can be queried.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwPraCTPOperEntry

hwPraCTPOperIndex		1.3.6.1.4.1.2011.6.112.1.8.1.1
Indicates the frame/slot/port. 22 0 0010110 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for E1 port, must be 0x16 the next 8 bits indicate the frame ID, the next 6 bits indicate the slot ID, the next 7 bits indicate the port ID, the last 4 bits must be 0. The type of port include: E1 port = 0x16 PSTN port = 0x18 BRA port = 0x19 AT0 port = 0x1b
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hwPraCTPBchnSrvState		1.3.6.1.4.1.2011.6.112.1.8.1.2
Indicates the running status of the service layer of the 32 B channels of the PRA. Each character corresponds to a timeslot. The value of the character is as follows: 1-Idle; 2-Busy; 3-Faulty; 4-Unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwPraCTPBchnAdminState		1.3.6.1.4.1.2011.6.112.1.8.1.3
Indicates the administration status of the service layer of the 32 B channels of the PRA. Each character corresponds to a timeslot. The value of the character is as follows: 1-blocked-locally; 2-blocked-remotely; 3-in-service;4-shutting-down.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwPraCTPAdminOper		1.3.6.1.4.1.2011.6.112.1.8.1.4
Indicates the service operation. Options: 1. endService(1) -stop service 2. startService(2) -start service 3. deferEndingService(3) -stop service gracefully
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	endService(1), startService(2), deferEndingService(3)

hwPraCTPDState		1.3.6.1.4.1.2011.6.112.1.8.1.5
Indicates the status of the PRA D channel. Options: 1. established(1) -established 2. block(2) -blocked 3. notConstruct(3) -unestablished
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	established(1), block(2), notConstruct(3)

hwPraCTPMaxCobTime		1.3.6.1.4.1.2011.6.112.1.8.1.6
Indicates length of waiting timer for pra user defer end service. 0 is not allowed to set. Default: 240 Unit: minute
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..1440

hwPraCTPOnexpire		1.3.6.1.4.1.2011.6.112.1.8.1.7
Indicates disposal mode when pra user defer end service timeout. Options: 1. force(1) -force end service 2. cancel(2) -cancel end service Default: force(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	force(1), cancel(2)

hwPraCTPAutoResumeTimes		1.3.6.1.4.1.2011.6.112.1.8.1.8
Indicates auto resume times of pra user.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..255

hwPortStateTraceOperTable		1.3.6.1.4.1.2011.6.112.1.9
It is used to trace port status. The index of this table is hwPortStateTraceFrameId. This table traces states of the MG PSTN ports and MG BRA ports in real time, which contains trace start, trace end, and handshake operations.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwPortStateTraceOperEntry

hwPortStateTraceOperEntry		1.3.6.1.4.1.2011.6.112.1.9.1
It is used to trace port status. The index of this entry is hwPortStateTraceFrameId. This table traces states of the MG PSTN ports and MG BRA ports in real time, which contains trace start, trace end, and handshake operations.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwPortStateTraceOperEntry

hwPortStateTraceOperFrameId		1.3.6.1.4.1.2011.6.112.1.9.1.1
Indicates the frame ID.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hwPortStateTraceOperType		1.3.6.1.4.1.2011.6.112.1.9.1.2
Indicates the operation type. Options: 1. stop(1) -stop tracing 2. start(2) -start tracing 3. handshake(3) -handshake
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	stop(1), start(2), handshake(3)

hwPortStateTraceOperReportType		1.3.6.1.4.1.2011.6.112.1.9.1.3
Indicates the report type (adopting the bit table): Bit0: indicates to report the running status change of the physical layer. Bit1: indicates to report the administration status change of the physical layer. Bit2: indicates to report the running status change of the service layer. Bit3: indicates to report the administration status change of the service layer.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..15

hwUserDataTrapSequence		1.3.6.1.4.1.2011.6.112.1.10
OBJECT IDENTIFIER

hwPstnUserDataTrapSequence		1.3.6.1.4.1.2011.6.112.1.10.1
Indicates that the Trap sequence is reported after the PSTN subscriber data changes.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwBraUserDataChangeSequence		1.3.6.1.4.1.2011.6.112.1.10.2
Indicates that the Trap sequence is reported after the BRA subscriber data changes.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwPraUserDataChangeSequence		1.3.6.1.4.1.2011.6.112.1.10.3
Indicates that the Trap sequence is reported after the PRA subscriber data changes.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwR2UserDataChangeSequence		1.3.6.1.4.1.2011.6.112.1.10.4
Indicates that the Trap sequence is reported after the R2 subscriber data changes.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwPmbsCTPConfigTable		1.3.6.1.4.1.2011.6.112.1.11
This table is used to config PMBS user. The index of this table is hwPmbsCTPConfigIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwPmbsCTPConfigEntry

hwPmbsCTPConfigEntry		1.3.6.1.4.1.2011.6.112.1.11.1
This table is used to config PMBS user. The index of this entry is hwPmbsCTPConfigIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwPmbsCTPConfigEntry

hwPmbsCTPConfigIndex		1.3.6.1.4.1.2011.6.112.1.11.1.1
Indicates the frame/slot/port. The PMBS user must be configurated on BRA port. 25 0 0011001 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for BRA port, must be 0x19 the next 8 bits indicate the frame ID, the next 6 bits indicate the slot ID, the next 7 bits indicate the port ID, the last 4 bits must be 0. The type of port include: E1 port = 0x16 PSTN port = 0x18 BRA port = 0x19 AT0 port = 0x1b
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hwPmbsCTPLinkSetNo		1.3.6.1.4.1.2011.6.112.1.11.1.2
IUA LinkSetNo.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hwPmbsCTPluaIID		1.3.6.1.4.1.2011.6.112.1.11.1.3
IUA Interface ID.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..65535 | -1

hwPmbsCTPRowStatus		1.3.6.1.4.1.2011.6.112.1.11.1.4
Row status.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

hwPmbsCTPIuaTextIID		1.3.6.1.4.1.2011.6.112.1.11.1.5
Use the text to indicate the interface ID of the PMBS terminal.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..51)

hwPmbsCTPOperTable		1.3.6.1.4.1.2011.6.112.1.12
This table is used to operate the PMBS user. The index of this table is hwPmbsCTPOperIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwPmbsCTPOperEntry

hwPmbsCTPOperEntry		1.3.6.1.4.1.2011.6.112.1.12.1
This table is used to operate the PMBS user. The index of this entry is hwPmbsCTPOperIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwPmbsCTPOperEntry

hwPmbsCTPOperIndex		1.3.6.1.4.1.2011.6.112.1.12.1.1
Indicates the frame/slot/port. 25 0 0011001 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for BRA port, must be 0x19 the next 8 bits indicate the frame ID, the next 6 bits indicate the slot ID, the next 7 bits indicate the port ID, the last 4 bits must be 0. The type of port include: E1 port = 0x16 PSTN port = 0x18 BRA port = 0x19 AT0 port = 0x1b
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hwPmbsCTPPLinkState		1.3.6.1.4.1.2011.6.112.1.12.1.2
Indicates from left to right, each bit indicates plink status of one TEI(0-62) or not, 0 means plink not established, 1 means plink established.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	tei1(0), tei2(1), tei3(2), tei4(3), tei5(4), tei6(5), tei7(6), tei8(7), tei9(8), tei10(9), tei11(10), tei12(11), tei13(12), tei14(13), tei15(14), tei16(15), tei17(16), tei18(17), tei19(18), tei20(19), tei21(20), tei22(21), tei23(22), tei24(23), tei25(24), tei26(25), tei27(26), tei28(27), tei29(28), tei30(29), tei31(30), tei32(31), tei33(32), tei34(33), tei35(34), tei36(35), tei37(36), tei38(37), tei39(38), tei40(39), tei41(40), tei42(41), tei43(42), tei44(43), tei45(44), tei46(45), tei47(46), tei48(47), tei49(48), tei50(49), tei51(50), tei52(51), tei53(52), tei54(53), tei55(54), tei56(55), tei57(56), tei58(57), tei59(58), tei60(59), tei61(60), tei62(61), tei63(62)

hwPstnCTPRightConfigTable		1.3.6.1.4.1.2011.6.112.1.13
This table is used to config PSTN user's right and servicedata. The indexes of this table are hwPstnCTPRightConfigIndex, hwPstnCTPRightPortBindIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwPstnCTPRightConfigEntry

hwPstnCTPRightConfigEntry		1.3.6.1.4.1.2011.6.112.1.13.1
This table is used to config PSTN user's right and servicedata. The indexes of this entry are hwPstnCTPRightConfigIndex, hwPstnCTPRightPortBindIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwPstnCTPRightConfigEntry

hwPstnCTPRightConfigIndex		1.3.6.1.4.1.2011.6.112.1.13.1.1
Indicates the frame/slot/port. 31 0 0011000 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for PSTN port, must be 0x18 the next 8 bits indicate the frame ID, the next 6 bits indicate the slot ID, the next 7 bits indicate the port ID, the last 4 bits must be 0. The type of port include: E1 port = 0x16 PSTN port = 0x18 BRA port = 0x19 AT0 port = 0x1b
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hwPstnCTPRightPortBindIndex		1.3.6.1.4.1.2011.6.112.1.13.1.2
Indicates the telephone number index.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..65535

hwPstnCTPRightCallHold		1.3.6.1.4.1.2011.6.112.1.13.1.3
Indicates the right flag of callhold. Options: 1. disable(1) -disable 2. enable(2) -enable
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

hwPstnCTPRightThreeParty		1.3.6.1.4.1.2011.6.112.1.13.1.4
Indicates the right flag of three-party. Options: 1. disable(1) -disable 2. enable(2) -enable
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

hwPstnCTPRightConf		1.3.6.1.4.1.2011.6.112.1.13.1.5
Indicates the right flag of conf. Options: 1. disable(1) -disable 2. enable(2) -enable
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

hwPstnCTPRightCt		1.3.6.1.4.1.2011.6.112.1.13.1.6
Indicates the right flag of ct. Options: 1. disable(1) -disable 2. enable(2) -enable
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

hwPstnCTPRightCw		1.3.6.1.4.1.2011.6.112.1.13.1.7
Indicates the right flag of cw. Options: 1. disable(1) -disable 2. enable(2) -enable
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

hwPstnCTPRightMcid		1.3.6.1.4.1.2011.6.112.1.13.1.8
Indicates the right flag of mcid. Options: 1. disable(1) -disable 2. enable(2) -enable
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

hwPstnCTPRightMwi		1.3.6.1.4.1.2011.6.112.1.13.1.9
Indicates the right flag of mwi. Options: 1. disable(1) -disable 2. enable(2) -enable
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

hwPstnCTPRightTp		1.3.6.1.4.1.2011.6.112.1.13.1.10
Indicates the right flag of tp. Options: 1. disable(1) -disable 2. enable(2) -enable
Status: obsolete	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

hwPstnCTPRightCd		1.3.6.1.4.1.2011.6.112.1.13.1.11
Indicates the right flag of cd. Options: 1. disable(1) -disable 2. enable(2) -enable
Status: obsolete	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

hwPstnCTPRightUus1		1.3.6.1.4.1.2011.6.112.1.13.1.12
Indicates the right flag of uus1. Options: 1. disable(1) -disable 2. enable(2) -enable
Status: obsolete	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

hwPstnCTPRightUus2		1.3.6.1.4.1.2011.6.112.1.13.1.13
Indicates the right flag of uus2. Options: 1. disable(1) -disable 2. enable(2) -enable
Status: obsolete	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

hwPstnCTPRightUus3		1.3.6.1.4.1.2011.6.112.1.13.1.14
Indicates the right flag of uus3. Options: 1. disable(1) -disable 2. enable(2) -enable
Status: obsolete	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

hwPstnCTPRightCentrexNo		1.3.6.1.4.1.2011.6.112.1.13.1.15
It is used to set centrex NO. of SipPstnUser, 4294967295 means to clear the configuration.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..4294967295

hwPstnCTPRightCentrexPrefix		1.3.6.1.4.1.2011.6.112.1.13.1.16
Indicates the CentrexPrefix of SipPstnUser.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..7)

hwPstnCTPRightCentrexFlag		1.3.6.1.4.1.2011.6.112.1.13.1.17
Indicates the CentrexFlag of SipPstnUser. Options: 1. dialDirectly(1) -dial directly 2. dialSecondary(2) -dial secondary
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	dialDirectly(1), dialSecondary(2)

hwPstnCTPRightMwiMode		1.3.6.1.4.1.2011.6.112.1.13.1.18
Indicates the MwiMode of SipPstnUser. Options: 1. deferred(1) -deferred 2. immediate(2) -immediate 3. combine(3) -combine
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	deferred(1), immediate(2), combine(3)

hwPstnCTPRightHotTime		1.3.6.1.4.1.2011.6.112.1.13.1.19
Indicates the HotTime of SipPstnUser. Unit: second
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..255

hwPstnCTPRightHotLineNum		1.3.6.1.4.1.2011.6.112.1.13.1.20
Indicates the HotLineNum of SipPstnUser, the length of hotlinenum mustn't exceed 64.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..64)

hwPstnCTPRightDialTone		1.3.6.1.4.1.2011.6.112.1.13.1.21
Indicates the DialTone of SipPstnUser. Options: 1. normal(1) -normal tone 2. special(2) -special tone 3. mw(3) -message waiting tone 4. stutter(4) -stutter tone
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	normal(1), special(2), mw(3), stutter(4)

hwPstnCTPRightCfbNum		1.3.6.1.4.1.2011.6.112.1.13.1.22
Indicates the CfbNum of SipPstnUser.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..64)

hwPstnCTPRightCfnrNum		1.3.6.1.4.1.2011.6.112.1.13.1.23
Indicates the CfnrNum of SipPstnUser.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..64)

hwPstnCTPRightCfuNum		1.3.6.1.4.1.2011.6.112.1.13.1.24
Indicates the CfuNum of SipPstnUser.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..64)

hwPstnCTPRightCfnrTime		1.3.6.1.4.1.2011.6.112.1.13.1.25
Indicates the CfnrTime of SipPstnUser. Unit: second
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..65535

hwPstnCTPRightAnonymousCall		1.3.6.1.4.1.2011.6.112.1.13.1.26
Indicates the right flag of anonymous-call. Options: 1. disable(1) -disable anonymous-call 2. enable(2) -enable anonymous-call
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

hwPstnCTPRightAuthName		1.3.6.1.4.1.2011.6.112.1.13.1.27
Indicates the authorization username of sippstnuser. The character set is unrestricted.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..64)

hwPstnCTPRightAuthPassword		1.3.6.1.4.1.2011.6.112.1.13.1.28
Indicates the authorization password of sippstnuser. The character set is unrestricted.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..64)

hwPstnCTPRightEndConfigIndex		1.3.6.1.4.1.2011.6.112.1.13.1.29
Indicates the end shelf/slot/port.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hwPstnCTPRightAuthPasswordMode		1.3.6.1.4.1.2011.6.112.1.13.1.30
Indicates the authorization mode of the password for sippstnuser. Options: 1. password(1) -authorized by password 2. ha1(2) --authorized by ha1
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	password(1), ha1(2)

hwPstnCTPRightAuthHA1		1.3.6.1.4.1.2011.6.112.1.13.1.31
Indicates the authorization HA1 value of sippstnuser. The character set is unrestricted.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwPstnCTPRightAutoReversePolarity		1.3.6.1.4.1.2011.6.112.1.13.1.32
Indicates the right flag of auto reverse polarity. Options: 1. disable(1) -disable 2. enable(2) -enable
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

hwPstnCTPRightDisplayNameMode		1.3.6.1.4.1.2011.6.112.1.13.1.33
Indicates the right flag of display name mode. Options: 1. disable(1) -disable 2. enable(2) -enable
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

hwPstnCTPRightDisplayName		1.3.6.1.4.1.2011.6.112.1.13.1.34
Indicates the display name string.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..256)

hwPstnCTPRightHotLine		1.3.6.1.4.1.2011.6.112.1.13.1.35
Indicates the right flag of hotline. Options: 1. disable(1) -disable 2. enable(2) -enable
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

hwPstnCTPRightPermanentHold		1.3.6.1.4.1.2011.6.112.1.13.1.36
Indicates the right flag of permanent-hold. Options: 1. disable(1) -disable 2. enable(2) -enable
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

hwPstnCTPRightCutoffDisconnect		1.3.6.1.4.1.2011.6.112.1.13.1.37
Indicates the right flag of cutoff-disconnect. Options: 1. disable(1) -disable 2. enable(2) -enable
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

hwPstnCTPRightSccClass		1.3.6.1.4.1.2011.6.112.1.13.1.38
Indicates the right flag of SCC class service, for example call-park, call-pickup, EBO. Options: 1. disable(1) -disable 2. enable(2) -enable
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

hwPstnCTPRightPermanentHoldMode		1.3.6.1.4.1.2011.6.112.1.13.1.39
Indicates the PermanentHoldMode of SipPstnUser. Options: 1. norecall(1) - no recall 2. reminder(2) -reminder 3. recall(3) -recall
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	norecall(1), reminder(2), recall(3)

hwPstnCTPRightPermanentHoldTime		1.3.6.1.4.1.2011.6.112.1.13.1.40
Indicates the PermanentHoldTime of SipPstnUser. Unit: second
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	12..1023

hwPstnCTPRightFastDisconnect		1.3.6.1.4.1.2011.6.112.1.13.1.41
Indicates the right flag of fast-disconnect. Options: 1. disable(1) -disable 2. enable(2) -enable
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

hwPstnCTPRightDc		1.3.6.1.4.1.2011.6.112.1.13.1.42
Indicates the right flag of dual communication. Options: 1. disable(1) -disable 2. enable(2) -enable
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

hwCTPExternNumberConfigTable		1.3.6.1.4.1.2011.6.112.1.14
This table is used to config extern number of the PSTN or ISDN user. The indexes of this table are hwCTPExternNumberConfigIndex, hwCTPExternNumberPortBindIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwCTPExternNumberConfigEntry

hwCTPExternNumberConfigEntry		1.3.6.1.4.1.2011.6.112.1.14.1
This table is used to config extern number of the PSTN or ISDN user. The indexes of this entry are hwCTPExternNumberConfigIndex, hwCTPExternNumberPortBindIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwCTPExternNumberConfigEntry

hwCTPExternNumberConfigIndex		1.3.6.1.4.1.2011.6.112.1.14.1.1
Indicates the frame/slot/port. 31 0 xxxxxxx | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the type of port the next 8 bits indicate the frame ID, the next 6 bits indicate the slot ID, the next 7 bits indicate the port ID, the last 4 bits must be 0. The type of port include: E1 port = 0x16 PSTN port = 0x18 BRA port = 0x19 AT0 port = 0x1b
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hwCTPExternNumberPortBindIndex		1.3.6.1.4.1.2011.6.112.1.14.1.2
Indicates the extend number index. If the value equal -1, then return the idle index of this shelf/slot/port.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..65534

hwCTPExternNumber		1.3.6.1.4.1.2011.6.112.1.14.1.3
Indicates the extend number. - means to delete this extern number.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..64)

hwCTPExternRowStatus		1.3.6.1.4.1.2011.6.112.1.14.1.4
RowStatus
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

hwCTPExternUserGroupid		1.3.6.1.4.1.2011.6.112.1.14.1.5
It indicates the user group ID. -1 indicates clear the user group info.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	-1..65535

hwBraCTPRightConfigTable		1.3.6.1.4.1.2011.6.112.1.15
This table is used to config BRA user's right and servicedata. The indexes of this table are hwBraCTPRightConfigIndex, hwBraCTPRightPortBindIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwBraCTPRightConfigEntry

hwBraCTPRightConfigEntry		1.3.6.1.4.1.2011.6.112.1.15.1
This table is used to config BRA user's right and servicedata. The indexes of this entry are hwBraCTPRightConfigIndex, hwBraCTPRightPortBindIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwBraCTPRightConfigEntry

hwBraCTPRightConfigIndex		1.3.6.1.4.1.2011.6.112.1.15.1.1
Indicates the frame/slot/port. 31 0 0011001 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for BRA port, must be 0x19 the next 8 bits indicate the frame ID, the next 6 bits indicate the slot ID, the next 7 bits indicate the port ID, the last 4 bits must be 0. The type of port include: E1 port = 0x16 PSTN port = 0x18 BRA port = 0x19 AT0 port = 0x1b
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hwBraCTPRightPortBindIndex		1.3.6.1.4.1.2011.6.112.1.15.1.2
Indicates the telephone number index.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..65535

hwBraCTPRightAuthName		1.3.6.1.4.1.2011.6.112.1.15.1.3
Indicates the authorization username of sipbrauser. The character set is unrestricted.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..64)

hwBraCTPRightAuthPassword		1.3.6.1.4.1.2011.6.112.1.15.1.4
Indicates the authorization password of sipbrauser. The character set is unrestricted.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..64)

hwBraCTPRightEndConfigIndex		1.3.6.1.4.1.2011.6.112.1.15.1.5
Indicates the end shelf/slot/port.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hwBraCTPRightAuthPasswordMode		1.3.6.1.4.1.2011.6.112.1.15.1.6
Indicates the authorization mode of the password for sipbrauser. Options: 1. password(1) -authorized by password 2. ha1(2) -authorized by ha1
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	password(1), ha1(2)

hwBraCTPRightAuthHA1		1.3.6.1.4.1.2011.6.112.1.15.1.7
Indicates the authorization HA1 value of sipbrauser. The character set is unrestricted.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwBraCTPRightCentrexNo		1.3.6.1.4.1.2011.6.112.1.15.1.8
It is used to set centrex NO. of SipBraUser, 4294967295 means to clear the configuration.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..4294967295

hwBraCTPRightCentrexPrefix		1.3.6.1.4.1.2011.6.112.1.15.1.9
Indicates the CentrexPrefix of SipBraUser.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..7)

hwBraCTPRightCentrexFlag		1.3.6.1.4.1.2011.6.112.1.15.1.10
Indicates the CentrexFlag of SipBraUser. Options: 1. dialDirectly(1) -dial directly 2. dialSecondary(2) -dial secondary
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	dialDirectly(1), dialSecondary(2)

hwBraCTPRightMwiMode		1.3.6.1.4.1.2011.6.112.1.15.1.11
Indicates the MwiMode of SipBraUser. Options: 1. deferred(1) -deferred 2. immediate(2) -immediate 3. combine(3) -combine
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	deferred(1), immediate(2), combine(3)

hwBraCTPRightCallHold		1.3.6.1.4.1.2011.6.112.1.15.1.12
Indicates the right flag of callhold. Options: 1. disable(1) -disable 2. enable(2) -enable
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

hwBraCTPRightThreeParty		1.3.6.1.4.1.2011.6.112.1.15.1.13
Indicates the right flag of three-party. Options: 1. disable(1) -disable 2. enable(2) -enable
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

hwBraCTPRightConf		1.3.6.1.4.1.2011.6.112.1.15.1.14
Indicates the right flag of conf. Options: 1. disable(1) -disable 2. enable(2) -enable
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

hwBraCTPRightCt		1.3.6.1.4.1.2011.6.112.1.15.1.15
Indicates the right flag of ct. Options: 1. disable(1) -disable 2. enable(2) -enable
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

hwBraCTPRightCw		1.3.6.1.4.1.2011.6.112.1.15.1.16
Indicates the right flag of cw. Options: 1. disable(1) -disable 2. enable(2) -enable
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

hwBraCTPRightMcid		1.3.6.1.4.1.2011.6.112.1.15.1.17
Indicates the right flag of mcid. Options: 1. disable(1) -disable 2. enable(2) -enable
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

hwBraCTPRightMwi		1.3.6.1.4.1.2011.6.112.1.15.1.18
Indicates the right flag of mwi. Options: 1. disable(1) -disable 2. enable(2) -enable
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

hwPraCTPRightConfigTable		1.3.6.1.4.1.2011.6.112.1.16
This table is used to config PRA user's servicedata. The indexes of this table are hwPraCTPRightConfigIndex, hwPraCTPRightPortBindIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwPraCTPRightConfigEntry

hwPraCTPRightConfigEntry		1.3.6.1.4.1.2011.6.112.1.16.1
This table is used to config PRA user's servicedata. The indexes of this entry are hwPraCTPRightConfigIndex, hwPraCTPRightPortBindIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwPraCTPRightConfigEntry

hwPraCTPRightConfigIndex		1.3.6.1.4.1.2011.6.112.1.16.1.1
Indicates the frame/slot/port. 31 0 0010110 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for E1 port, must be 0x16 the next 8 bits indicate the frame ID, the next 6 bits indicate the slot ID, the next 7 bits indicate the port ID, the last 4 bits must be 0. The type of port include: E1 port = 0x16 PSTN port = 0x18 BRA port = 0x19 AT0 port = 0x1b
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hwPraCTPRightPortBindIndex		1.3.6.1.4.1.2011.6.112.1.16.1.2
Indicates the telephone number index.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..65535

hwPraCTPRightAuthName		1.3.6.1.4.1.2011.6.112.1.16.1.3
Indicates the authorization username of sipprauser. The character set is unrestricted.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..64)

hwPraCTPRightAuthPassword		1.3.6.1.4.1.2011.6.112.1.16.1.4
Indicates the authorization password of sipprauser. The character set is unrestricted.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..64)

hwPraCTPRightEndConfigIndex		1.3.6.1.4.1.2011.6.112.1.16.1.5
Indicates the end shelf/slot/port.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hwPraCTPRightAuthPasswordMode		1.3.6.1.4.1.2011.6.112.1.16.1.6
Indicates the authorization mode of the password for sipprauser. Options: 1. password(1) -authorized by password 2. ha1(2) -authorized by ha1
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	password(1), ha1(2)

hwPraCTPRightAuthHA1		1.3.6.1.4.1.2011.6.112.1.16.1.7
Indicates the authorization HA1 value of sipprauser. The character set is unrestricted.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwPraCTPRightCentrexNo		1.3.6.1.4.1.2011.6.112.1.16.1.8
It is used to set centrex NO. of SipPraUser, 4294967295 means to clear the configuration.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..4294967295

hwPraCTPRightCentrexPrefix		1.3.6.1.4.1.2011.6.112.1.16.1.9
Indicates the CentrexPrefix of SipPraUser.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..7)

hwPraCTPRightCentrexFlag		1.3.6.1.4.1.2011.6.112.1.16.1.10
Indicates the CentrexFlag of SipPraUser. Options: 1. dialDirectly(1) -dial directly 2. dialSecondary(2) -dial secondary
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	dialDirectly(1), dialSecondary(2)

hwPraCTPRightMwiMode		1.3.6.1.4.1.2011.6.112.1.16.1.11
Indicates the MwiMode of SipPraUser. Options: 1. deferred(1) -deferred 2. immediate(2) -immediate 3. combine(3) -combine
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	deferred(1), immediate(2), combine(3)

hwR2CTPConfigTable		1.3.6.1.4.1.2011.6.112.1.17
It is used to configure the service attributes of a R2 port. It is used to add, delete, modify, and query the R2 user with the VSP feature. The index of this table is the hwR2CTPConfigIndex. The attributes of a R2 user with the VoIP feature include the gateway ID, terminal ID, R2 profile index. Through the table, you can configure, modify, and query the above-mentioned attributes of the R2 user.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwR2CTPConfigEntry

hwR2CTPConfigEntry		1.3.6.1.4.1.2011.6.112.1.17.1
It is used to configure the service attributes of a R2 port. It is used to add, delete, modify, and query the R2 user with the VSP feature. The index of this entry is the hwR2CTPConfigIndex. The attributes of a R2 user with the VoIP feature include the gateway ID, terminal ID, R2 profile index. Through the table, you can configure, modify, and query the above-mentioned attributes of the R2 user.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwR2CTPConfigEntry

hwR2CTPConfigIndex		1.3.6.1.4.1.2011.6.112.1.17.1.1
Indicates the frame/slot/port. 31 0 0010110 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for R2 port, must be 0x16 the next 8 bits indicate the frame ID, the next 6 bits indicate the slot ID, the next 7 bits indicate the port ID, the last 4 bits must be 0. The type of port include: E1 port = 0x16 PSTN port = 0x18 BRA port = 0x19 AT0 port = 0x1b
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hwR2CTPMgId		1.3.6.1.4.1.2011.6.112.1.17.1.2
Indicates the MG ID.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..16777215

hwR2CTPTerminationID		1.3.6.1.4.1.2011.6.112.1.17.1.3
Indicates the start terminal ID (only the character string of digit type is supported).
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..64)

hwR2CTPSignalProfileIndex		1.3.6.1.4.1.2011.6.112.1.17.1.4
Indicates the R2 signal profile index.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..15

hwR2CTPSignalProfileName		1.3.6.1.4.1.2011.6.112.1.17.1.5
Indicates the R2 signal profile name.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwR2CTPRowStatus		1.3.6.1.4.1.2011.6.112.1.17.1.6
Indicates the row status.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

hwR2CTPPriorityFlag		1.3.6.1.4.1.2011.6.112.1.17.1.7
Indicates terminal priority. Options: 1. cat1(1) -the highest priority 2. cat2(2) -the middle priority 3. cat3(3) -the lowest priority
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	cat1(1), cat2(2), cat3(3)

hwR2CTPTelNo		1.3.6.1.4.1.2011.6.112.1.17.1.8
Indicates telphone number.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..64)

hwR2CTPUserGroupid		1.3.6.1.4.1.2011.6.112.1.17.1.9
It indicates the user group ID. -1 indicates clear the user group info.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	-1..65535

hwR2CTPDigitMapGroupName		1.3.6.1.4.1.2011.6.112.1.17.1.10
It indicates the digitmap group name.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwR2CTPRemoteRingFlag		1.3.6.1.4.1.2011.6.112.1.17.1.11
Indicates RemoteRing. Options: 1. disable(1) -disable receive remote early media 2. enable(2) -enable receive remote early media 3. null(-1) -invalid value
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2), null(-1)

hwR2CTPConfigIncomingcallChangeName		1.3.6.1.4.1.2011.6.112.1.17.1.12
It indicates the number change name of incoming call.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwR2CTPConfigOutgoingcallChangeName		1.3.6.1.4.1.2011.6.112.1.17.1.13
It indicates the number change name of outgoing call.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwR2CTPOperTable		1.3.6.1.4.1.2011.6.112.1.18
It is used to perform operations on service attributes of a R2 user port. Through this table, you can perform maintenance operations on a R2 user with the VSP feature. The index of this table is hwR2CTPOperIndex. Through this table, you can query the running status of 32 B channels of the R2 service, and management status of 32 B channels of the R2 service. Through the table, services on the R2 port can be terminated, started, and the service status can be queried.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwR2CTPOperEntry

hwR2CTPOperEntry		1.3.6.1.4.1.2011.6.112.1.18.1
It is used to perform operations on service attributes of a R2 user port. Through this table, you can perform maintenance operations on a R2 user with the VSP feature. The index of this entry is hwR2CTPOperIndex. Through this table, you can query the running status of 32 B channels of the R2 service, and management status of 32 B channels of the R2 service. Through the table, services on the R2 port can be terminated, started, and the service status can be queried.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwR2CTPOperEntry

hwR2CTPOperIndex		1.3.6.1.4.1.2011.6.112.1.18.1.1
Indicates the frame/slot/port. 31 0 0010110 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for R2 port, must be 0x16 the next 8 bits indicate the frame ID, the next 6 bits indicate the slot ID, the next 7 bits indicate the port ID, the last 4 bits must be 0. The type of port include: E1 port = 0x16 PSTN port = 0x18 BRA port = 0x19 AT0 port = 0x1b
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hwR2CTPBchnSrvState		1.3.6.1.4.1.2011.6.112.1.18.1.2
Indicates the running status of the service layer of the 32 B channels of the R2. Each character corresponds to a timeslot. The value of the character is as follows: 1-Idle; 2-Busy; 3-Faulty; 4-Unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwR2CTPBchnAdminState		1.3.6.1.4.1.2011.6.112.1.18.1.3
Indicates the administration status of the service layer of the 32 B channels of the R2. Each character corresponds to a timeslot. The value of the character is as follows: 1-blocked-locally; 2-blocked-remotely; 3-in-service;4-shutting-down;5-MGCblock;6-PBXblock;7-bothblock.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwR2CTPAdminOper		1.3.6.1.4.1.2011.6.112.1.18.1.4
Indicates the service operation. Options: 1. endService(1) -stop service 2. startService(2) -start service 3. deferEndingService(3) -stop service gracefully
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	endService(1), startService(2), deferEndingService(3)

hwR2CTPMaxCobTime		1.3.6.1.4.1.2011.6.112.1.18.1.5
Indicates length of waiting timer for R2 user defer end service. 0 is not allowed to set. Default: 240 Unit: minute
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..1440

hwR2CTPOnexpire		1.3.6.1.4.1.2011.6.112.1.18.1.6
Indicates disposal mode when R2 user defer end service timeout. Options: 1. force(1) -force end service 2. cancel(2) -cancel end service Default: force(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	force(1), cancel(2)

hwR2CTPRightConfigTable		1.3.6.1.4.1.2011.6.112.1.19
This table is used to config R2 user's right. The indexes of this table are hwR2CTPRightConfigIndex, hwR2CTPRightPortBindIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwR2CTPRightConfigEntry

hwR2CTPRightConfigEntry		1.3.6.1.4.1.2011.6.112.1.19.1
This table is used to config R2 user's right. The indexes of this entry are hwR2CTPRightConfigIndex, hwR2CTPRightPortBindIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwR2CTPRightConfigEntry

hwR2CTPRightConfigIndex		1.3.6.1.4.1.2011.6.112.1.19.1.1
Indicates the frame/slot/port. 31 0 0011000 | xxxxxxxx | xxxxxx | xxxxxxx | 0000 port frame slot port 0 type The highest 7 bits indicate the type of port, for PSTN port, must be 0x18 the next 8 bits indicate the frame ID, the next 6 bits indicate the slot ID, the next 7 bits indicate the port ID, the last 4 bits must be 0. The type of port include: E1 port = 0x16 PSTN port = 0x18 BRA port = 0x19 AT0 port = 0x1b
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hwR2CTPRightPortBindIndex		1.3.6.1.4.1.2011.6.112.1.19.1.2
Indicates the telephone number index.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..65535

hwR2CTPRightAuthName		1.3.6.1.4.1.2011.6.112.1.19.1.3
Indicates the authorization username of sipR2user. The character set is unrestricted.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..64)

hwR2CTPRightAuthPassword		1.3.6.1.4.1.2011.6.112.1.19.1.4
Indicates the authorization password of sipR2user. The character set is unrestricted.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..64)

hwR2CTPRightAuthPasswordMode		1.3.6.1.4.1.2011.6.112.1.19.1.5
Indicates the authorization mode of the password for sipR2user. Options: 1. password(1) -authorized by password 2. ha1(2) -authorized by ha1
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	password(1), ha1(2)

hwR2CTPRightAuthHA1		1.3.6.1.4.1.2011.6.112.1.19.1.6
Indicates the authorization HA1 value of sipR2user. The character set is unrestricted.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwLightTrapPortNum		1.3.6.1.4.1.2011.6.112.2.1
The number of the ports send light state trap.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Integer32	0..128

hwLightTrapPortInfo		1.3.6.1.4.1.2011.6.112.2.2
The position and state of the ports.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	OCTET STRING	Size(0..896)

hwVoiceUserFrame		1.3.6.1.4.1.2011.6.112.2.3
Indicate the frame that user is configed at. -1 indicate invalid value.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Integer32	0..255 | -1

hwVoiceUserSlot		1.3.6.1.4.1.2011.6.112.2.4
Indicate the slot that user is configed at. -1 indicate invalid value.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Integer32	0..255 | -1

hwVoiceUserPort		1.3.6.1.4.1.2011.6.112.2.5
Indicate the port that user is configed at. -1 indicate invalid value.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Integer32	0..255 | -1

hwVoiceUserOperateType		1.3.6.1.4.1.2011.6.112.2.6
Indicate the port that user operate type. Options: 1. user-data-add(1) -add user data 2. user-data-delete(2) -delete user data 3. user-data-modify(3) -modify user data
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	user-data-add(1), user-data-delete(2), user-data-modify(3)

hwVoiceUserPortNum		1.3.6.1.4.1.2011.6.112.2.7
The number of the ports send by user config change trap.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Integer32	1..12

hwVoiceUserTsn		1.3.6.1.4.1.2011.6.112.2.8
Indicate the time slot ID that user is configed at. -1 indicate invalid value.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Integer32	0..31

hwIASVoiceUserPortLightTrap		1.3.6.1.4.1.2011.6.112.3.1.1.0.1
This notification indicates that reset result of the SIP media gateway.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwIASVoiceUserPortPstnDataChangeTrap		1.3.6.1.4.1.2011.6.112.3.1.1.0.2
This notification indicates that data of pstn user have been changed.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwIASVoiceUserPortBraDataChangeTrap		1.3.6.1.4.1.2011.6.112.3.1.1.0.3
This notification indicates that data of bra user have been changed.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwIASVoiceUserPortPraDataChangeTrap		1.3.6.1.4.1.2011.6.112.3.1.1.0.4
This notification indicates that data of pra user have been changed.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwIASVoiceUserPortPmbsDataChangeTrap		1.3.6.1.4.1.2011.6.112.3.1.1.0.5
This notification indicates that data of pmbs user have been changed.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwIASVoiceUserPortR2DataChangeTrap		1.3.6.1.4.1.2011.6.112.3.1.1.0.6
This notification indicates that data of R2 user have been changed.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwIASVoiceUserRemoteBlockTrap		1.3.6.1.4.1.2011.6.112.3.2.1.0.1
This notification indicates that the user is remote blocked.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwIASVoiceUserUnblockTrap		1.3.6.1.4.1.2011.6.112.3.2.1.0.2
This notification indicates that the user is unblocked.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwIASVoiceUserlockedTrap		1.3.6.1.4.1.2011.6.112.3.2.1.0.3
This notification indicates that the user is locked.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwIASVoiceUserUnlockedTrap		1.3.6.1.4.1.2011.6.112.3.2.1.0.4
This notification indicates that the user is unlocked.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwIASVoiceUserTsnBlockTrap		1.3.6.1.4.1.2011.6.112.3.2.2.0.1
This notification indicates that the user time slot is blocked.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwIASVoiceUserTsnUnBlockTrap		1.3.6.1.4.1.2011.6.112.3.2.2.0.2
This notification indicates that the user time slot is unblocked.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE