HUAWEI-SLB-MIB

File: HUAWEI-SLB-MIB.mib (10820 bytes)

Imported modules

HUAWEI-MIB SNMPv2-CONF SNMPv2-SMI

Imported symbols

hwDatacomm OBJECT-GROUP MODULE-COMPLIANCE
NOTIFICATION-GROUP IpAddress Integer32
OBJECT-TYPE MODULE-IDENTITY NOTIFICATION-TYPE

Defined Values

hwSLBMIB 1.3.6.1.4.1.2011.5.25.225
The MIB describes Server Load Balance
MODULE-IDENTITY    

hwSlbMibObjects 1.3.6.1.4.1.2011.5.25.225.1
OBJECT IDENTIFIER    

hwSlbTrapObjects 1.3.6.1.4.1.2011.5.25.225.1.1
OBJECT IDENTIFIER    

hwIpAddress 1.3.6.1.4.1.2011.5.25.225.1.1.1
The object indicates the IP address of a load balance member.
OBJECT-TYPE    
  IpAddress  

hwMemberName 1.3.6.1.4.1.2011.5.25.225.1.1.2
The object indicates the member in a load balance group, each member in the load balance group will provide same services to clients, system will select one member to serve the clients' requests.
OBJECT-TYPE    
  OCTET STRING Size(32)  

hwGroupName 1.3.6.1.4.1.2011.5.25.225.1.1.3
The object indicates the group name of members, each group members may contain same services and typically reside in the same physical location in a data center.
OBJECT-TYPE    
  OCTET STRING Size(32)  

hwPort 1.3.6.1.4.1.2011.5.25.225.1.1.4
The TCP or UDP port number, the range can from 1 to 65535.
OBJECT-TYPE    
  Integer32 1..65535  

hwProbeName 1.3.6.1.4.1.2011.5.25.225.1.1.5
The object indicates a probe that is used to detect failures for members in a group. When you initially configure a health probe, you should define its type and name.
OBJECT-TYPE    
  OCTET STRING Size(32)  

hwProbeType 1.3.6.1.4.1.2011.5.25.225.1.1.6
The object indicates probe type. S9300 support ICMP, TCP, UDP, HTTP probe types.
OBJECT-TYPE    
  INTEGER icmp(1), tcp(2), udp(3), http(4)  

hwConnectionNum 1.3.6.1.4.1.2011.5.25.225.1.1.7
The object indicates the connection number of a group member, usually five-tuple is used to describe a connection(source IP, detination IP, source port, destination port, protocal).
OBJECT-TYPE    
  Integer32 1..4000000  

hwMasterGroup 1.3.6.1.4.1.2011.5.25.225.1.1.8
The object indicates the master group. In order to improve reliability, S9300 can bind master group and backup group together to provide load balance service, operators can config two load balance group: one as master, the other as backup
OBJECT-TYPE    
  OCTET STRING Size(32)  

hwMasterGroupActiveNum 1.3.6.1.4.1.2011.5.25.225.1.1.9
The object indicates the active member number in the master server group.
OBJECT-TYPE    
  Integer32 0..100  

hwMasterGroupTotalNum 1.3.6.1.4.1.2011.5.25.225.1.1.10
The object indicates the total number of in-service members in the master group.
OBJECT-TYPE    
  Integer32 1..100  

hwBackupGroup 1.3.6.1.4.1.2011.5.25.225.1.1.11
The object indicates the backup group. In order to improve reliability, S9300 can bind master group and backup group together to provide load balance service, operators can config two load balance group one as master, the other as backup
OBJECT-TYPE    
  OCTET STRING Size(32)  

hwBackupGroupActiveNum 1.3.6.1.4.1.2011.5.25.225.1.1.12
The object indicates the active member number in the backup server group.
OBJECT-TYPE    
  Integer32 0..100  

hwBackupGroupTotalNum 1.3.6.1.4.1.2011.5.25.225.1.1.13
The object indicates the total number of in-service members in the backup group.
OBJECT-TYPE    
  Integer32 1..100  

hwActionName 1.3.6.1.4.1.2011.5.25.225.1.1.14
The object indicates the policy action. Operators can define different actions for clients request: forward packets, drop packets, load balance, sticky load balance.
OBJECT-TYPE    
  OCTET STRING Size(32)  

hwCurWorkGroupName 1.3.6.1.4.1.2011.5.25.225.1.1.15
The object indicates the current working group, the working group may be master group or backup group.
OBJECT-TYPE    
  OCTET STRING Size(32)  

hwSlbNotifications 1.3.6.1.4.1.2011.5.25.225.1.2
OBJECT IDENTIFIER    

hwMemberInstanceStateUp 1.3.6.1.4.1.2011.5.25.225.1.2.1
Member state changes to up. S9300 will select the member to accept clients' new requests.
NOTIFICATION-TYPE    

hwMemberInstanceStateDown 1.3.6.1.4.1.2011.5.25.225.1.2.2
Member state changes to down. S9300 will not select the member when clients' new requests come.
NOTIFICATION-TYPE    

hwGroupStateSwitchover 1.3.6.1.4.1.2011.5.25.225.1.2.3
When there are members' state change, current work group may change from master group to backup group or from backup group to master group.
NOTIFICATION-TYPE    

hwMemberConnectionFull 1.3.6.1.4.1.2011.5.25.225.1.2.4
The connections for the physical member attains threshold.
NOTIFICATION-TYPE    

hwMemberConnectionFullRestore 1.3.6.1.4.1.2011.5.25.225.1.2.5
The connections for the physical member restores to normal.
NOTIFICATION-TYPE    

hwMemberInstanceConnectionFull 1.3.6.1.4.1.2011.5.25.225.1.2.6
The connections for the group member attains threshold.
NOTIFICATION-TYPE    

hwMemberInstanceConnectionFullRestore 1.3.6.1.4.1.2011.5.25.225.1.2.7
The connections for the group member restores nomal.
NOTIFICATION-TYPE    

hwProbeInstanceStateUp 1.3.6.1.4.1.2011.5.25.225.1.2.8
Probe is used to check load balance member health, when there are expected response from load balance member, probe state will change to up.
NOTIFICATION-TYPE    

hwProbeInstanceStateDown 1.3.6.1.4.1.2011.5.25.225.1.2.9
Probe is used to check load balance member health, when there are no expected response from load balance member, probe state will change to down.
NOTIFICATION-TYPE    

hwSlbConformance 1.3.6.1.4.1.2011.5.25.225.1.3
OBJECT IDENTIFIER    

hwSlbGroups 1.3.6.1.4.1.2011.5.25.225.1.3.1
OBJECT IDENTIFIER    

hwSlbTrapObjectsGroup 1.3.6.1.4.1.2011.5.25.225.1.3.1.1
The group of objects that comprise SlbTrapObjects.
OBJECT-GROUP    

hwSlbNotificationsGroup 1.3.6.1.4.1.2011.5.25.225.1.3.1.2
The group of objects that comprise SlbNotifications.
NOTIFICATION-GROUP    

hwSlbCompliances 1.3.6.1.4.1.2011.5.25.225.1.3.2
OBJECT IDENTIFIER    

hwSlbCompliance 1.3.6.1.4.1.2011.5.25.225.1.3.2.1
The compliance statement for entities implementing Huawei server load balance MIB.
MODULE-COMPLIANCE