HUAWEI-SHDSL-MIB

File: HUAWEI-SHDSL-MIB.mib (40740 bytes)

Imported modules

HUAWEI-MIB IF-MIB SNMPv2-TC
SNMPv2-SMI SNMPv2-CONF HUAWEI-DEVICE-MIB
HDSL2-SHDSL-LINE-MIB

Imported symbols

huaweiUtility ifIndex RowStatus
DateAndTime Integer32 Unsigned32
OBJECT-TYPE MODULE-IDENTITY NOTIFICATION-TYPE
MODULE-COMPLIANCE OBJECT-GROUP NOTIFICATION-GROUP
hwFrameIndex hwSlotIndex hwPortIndex
hwPortOperStatus hdsl2ShdslSpanStatusEntry hdsl2ShdslSpanConfProfileEntry
hdsl2ShdslSpanConfProfileName hdsl2ShdslStatusActualLineRate hdsl2ShdslInvIndex
hdsl2ShdslEndpointSide hdsl2ShdslEndpointWirePair hdsl2Shdsl1DayIntervalNumber
hdsl2Shdsl15MinIntervalNumber

Defined Types

HwShdslPortBindConfEntry  
SEQUENCE    
  hwShdslGroupIndex Unsigned32
  hwShdslIfIndexFirst Unsigned32
  hwShdslIfIndexSecond Unsigned32
  hwShdslPortBindRowStatus RowStatus

HwShdslPortBindEntry  
SEQUENCE    
  hwShdslPortBindPriPort Integer32
  hwShdslPortBindType INTEGER
  hwShdslPortBindPortList Unsigned32
  hwShdslBindRowStatus RowStatus

HwShdslChipsetModeEntry  
SEQUENCE    
  hwShdslFrameID Integer32
  hwShdslSlotID Integer32
  hwShdslChipsetID Integer32
  hwShdslChipsetMode INTEGER

HwShdslSpanConfProfileEntry  
SEQUENCE    
  hwhdsl2hwShdslSpanConfModulationMode INTEGER
  hwhdsl2hwShdslSpanConfPathMode INTEGER
  hwhdsl2hwShdslSpanConfFrameType INTEGER
  hwhdsl2hwShdslSpanConfClkAlign INTEGER

HwShdslSpanStatusEntry  
SEQUENCE    
  hwhdsl2hwShdslModulationMode INTEGER
  hwhdsl2ShdslStatusCurrLoopAttenUs Unsigned32
  hwhdsl2ShdslStatusCurrSnrMarginUs Integer32
  hwhdsl2ShdslStatusCurrPboUs Integer32
  hwhdsl2ShdslStatusNtrMode INTEGER
  hwhdsl2ShdslStatusCurrLoopAttenDs Integer32
  hwhdsl2ShdslStatusCurrSnrMarginDs Integer32
  hwhdsl2ShdslStatusCurrPboDs Integer32

HwShdslCrossTalkCanellationGroupEntry  
SEQUENCE    
  hwShdslCrossTalkCanellationGroupIndex Unsigned32
  hwShdslCrossTalkCanellationGroupPortList OCTET STRING
  hwShdslCrossTalkCanellationGroupAdminStatus INTEGER
  hwShdslCrossTalkCanellationGroupOperStatus INTEGER
  hwShdslCrossTalkCanellationGroupRowStatus RowStatus

HwShdslEndpointCurrEntry  
SEQUENCE    
  hwShdslEndpointCurr15MinStartTime DateAndTime
  hwShdslEndpointCurr1DayStartTime DateAndTime

HwShdsl15MinIntervalEntry  
SEQUENCE    
  hwShdsl15MinIntervalStartTime DateAndTime

HwShdsl1DayIntervalEntry  
SEQUENCE    
  hwShdsl1DayIntervalStartTime DateAndTime

Defined Values

hwShdsl 1.3.6.1.4.1.2011.6.35
The HUAWEI SHDSL MIB,extend based on HDSL2-SHDSL-LINE-MIB-rfc4319.mib.
MODULE-IDENTITY    

hwShdslPortBindConfTable 1.3.6.1.4.1.2011.6.35.2
shdsl port bing configuration Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwShdslPortBindConfEntry

hwShdslPortBindConfEntry 1.3.6.1.4.1.2011.6.35.2.1
The entry of hwShdslPortBindConfTable. hwShdslGroupIndex should be equal to hwShdslIfIndexFirst. hwShdslIfIndexFirst is the fisrt ifindex of the binding group. hwShdslIfIndexSecond is the second ifindex of the binding group. When binding SHDSL port, RowStatus should be createAndGo(4). When unbinding SHDSL port, RowStatus should be destroy(6).
Status: current Access: not-accessible
OBJECT-TYPE    
  HwShdslPortBindConfEntry  

hwShdslGroupIndex 1.3.6.1.4.1.2011.6.35.2.1.1
Group index of the binding group.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwShdslIfIndexFirst 1.3.6.1.4.1.2011.6.35.2.1.2
Fisrt ifindex of the binding group. Should be specified when binding SHDSL port.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hwShdslIfIndexSecond 1.3.6.1.4.1.2011.6.35.2.1.3
Second ifindex of the binding group. Should be specified when binding SHDSL port.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hwShdslPortBindRowStatus 1.3.6.1.4.1.2011.6.35.2.1.4
rowStatus, which support the createAndGo and destroy.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwShdslPortBindTable 1.3.6.1.4.1.2011.6.35.3
This table supports the configuration of port type in the SLC and SLF board
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwShdslPortBindEntry

hwShdslPortBindEntry 1.3.6.1.4.1.2011.6.35.3.1
This table supports the configuration of port type in the SLC and SLF board
Status: current Access: not-accessible
OBJECT-TYPE    
  HwShdslPortBindEntry  

hwShdslPortBindPriPort 1.3.6.1.4.1.2011.6.35.3.1.1
SHDSL bind primary port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwShdslPortBindType 1.3.6.1.4.1.2011.6.35.3.1.2
SHDSL bind type
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER mPair(1), efm(2)  

hwShdslPortBindPortList 1.3.6.1.4.1.2011.6.35.3.1.3
SHDSL bind ports cover bits.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hwShdslBindRowStatus 1.3.6.1.4.1.2011.6.35.3.1.4
The row administration status, only supporting add or delete. add means bind, delete means undo the bind
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwShdslChipsetModeTable 1.3.6.1.4.1.2011.6.35.4
This table supports the configuration of the chipset mode of SHDSL board
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwShdslChipsetModeEntry

hwShdslChipsetModeEntry 1.3.6.1.4.1.2011.6.35.4.1
This table supports the configuration of the chipset mode of SHDSL board
Status: current Access: not-accessible
OBJECT-TYPE    
  HwShdslChipsetModeEntry  

hwShdslFrameID 1.3.6.1.4.1.2011.6.35.4.1.1
FrameID, the frame id of the device
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwShdslSlotID 1.3.6.1.4.1.2011.6.35.4.1.2
SlotID, the slot id of the device
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwShdslChipsetID 1.3.6.1.4.1.2011.6.35.4.1.3
ChipsetID, the chipset id of the board
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwShdslChipsetMode 1.3.6.1.4.1.2011.6.35.4.1.4
SHDSL Chipset Mode, the pathmode of the chipset
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER atm(1), ptm(2)  

hwShdslSpanConfProfileTable 1.3.6.1.4.1.2011.6.35.5
This table supports the configuration of the modulation mode of SHDSL line-profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwShdslSpanConfProfileEntry

hwShdslSpanConfProfileEntry 1.3.6.1.4.1.2011.6.35.5.1
This table supports the configuration of the modulation mode of SHDSL line-profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwShdslSpanConfProfileEntry  

hwhdsl2hwShdslSpanConfModulationMode 1.3.6.1.4.1.2011.6.35.5.1.1
This object defines the modulation mode in the HDSL2/SHDSL span.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER tcpam16(1), tcpam32(2), auto(3)  

hwhdsl2hwShdslSpanConfPathMode 1.3.6.1.4.1.2011.6.35.5.1.2
This object defines path mode of line, M-Pair bonding ports can only work in ATM mode, EFM bonding ports work in PTM mode.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER atm(1), ptm(2), tdm(3)  

hwhdsl2hwShdslSpanConfFrameType 1.3.6.1.4.1.2011.6.35.5.1.3
This object defines the frame type.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER e1(1), v35(2)  

hwhdsl2hwShdslSpanConfClkAlign 1.3.6.1.4.1.2011.6.35.5.1.4
This object defines the synchronization of the clock for sending and receving.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER syn(1), notsyn(2)  

hwShdslSpanStatusTable 1.3.6.1.4.1.2011.6.35.6
This table supports the status information of the modulation mode of SHDSL line-profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwShdslSpanStatusEntry

hwShdslSpanStatusEntry 1.3.6.1.4.1.2011.6.35.6.1
This table supports the status information of the modulation mode of SHDSL line-profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwShdslSpanStatusEntry  

hwhdsl2hwShdslModulationMode 1.3.6.1.4.1.2011.6.35.6.1.1
Contains the current modulation mode in the HDSL2/SHDSL span,as reported in an Equipment Response message.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER tcpam16(1), tcpam32(2), auto(3), invalidValue(-1)  

hwhdsl2ShdslStatusCurrLoopAttenUs 1.3.6.1.4.1.2011.6.35.6.1.2
Contains the current upstream loop attenuation value in the HDSL2/SHDSL span. It ranges from 0 to 128 units of 1dB.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwhdsl2ShdslStatusCurrSnrMarginUs 1.3.6.1.4.1.2011.6.35.6.1.3
Contains the current upstream snr margin value in the HDSL2/SHDSL span.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwhdsl2ShdslStatusCurrPboUs 1.3.6.1.4.1.2011.6.35.6.1.4
Contains the current upstream Power Back-Off in the HDSL2/SHDSL span.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwhdsl2ShdslStatusNtrMode 1.3.6.1.4.1.2011.6.35.6.1.5
Contains the NTR mode.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER freeRun(1), system(2), invalidValue(-1)  

hwhdsl2ShdslStatusCurrLoopAttenDs 1.3.6.1.4.1.2011.6.35.6.1.6
Contains the current downstream loop attenuation in the HDSL2/SHDSL span. It ranges from 0 to 128 units of 1dB.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwhdsl2ShdslStatusCurrSnrMarginDs 1.3.6.1.4.1.2011.6.35.6.1.7
Contains the current downstream SNR margin in the HDSL2/SHDSL span.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwhdsl2ShdslStatusCurrPboDs 1.3.6.1.4.1.2011.6.35.6.1.8
Contains the current downstream Power Back-Off in the HDSL2/SHDSL span.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwShdslCrossTalkCanellationGroupTable 1.3.6.1.4.1.2011.6.35.7
This table supports the configuration of the cross talk cancellation group.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwShdslCrossTalkCanellationGroupEntry

hwShdslCrossTalkCanellationGroupEntry 1.3.6.1.4.1.2011.6.35.7.1
This table supports the configuration of the cross talk cancellation group.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwShdslCrossTalkCanellationGroupEntry  

hwShdslCrossTalkCanellationGroupIndex 1.3.6.1.4.1.2011.6.35.7.1.1
The index of shdsl cross talk cancellation group.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

hwShdslCrossTalkCanellationGroupPortList 1.3.6.1.4.1.2011.6.35.7.1.2
The port list of the shdsl cross talk cancellation group. Port index indicates the port value.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwShdslCrossTalkCanellationGroupAdminStatus 1.3.6.1.4.1.2011.6.35.7.1.3
The administration status of the shdsl cross talk cancellation group. When the administration status is deactivate, the port in the group cannot be activated.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER deactivate(1), activate(2)  

hwShdslCrossTalkCanellationGroupOperStatus 1.3.6.1.4.1.2011.6.35.7.1.4
The running status of the shdsl cross talk cancellation group.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER activated(1), activating(2), deactivated(3)  

hwShdslCrossTalkCanellationGroupRowStatus 1.3.6.1.4.1.2011.6.35.7.1.5
This object is used to create a new row or to modify or delete an existing row in this table.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwShdslTrapsVbOids 1.3.6.1.4.1.2011.6.35.8
OBJECT IDENTIFIER    

hwShdsl2ChipsetSwitchResult 1.3.6.1.4.1.2011.6.35.8.1
SHDSL Chipset Switch Result
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

hwShdslPortBindOper 1.3.6.1.4.1.2011.6.35.8.2
SHDSL Port Bind operate
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

hwShdslPortBindNum 1.3.6.1.4.1.2011.6.35.8.3
SHDSL Bind Port number
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

hwhdslSpanConfProfileID 1.3.6.1.4.1.2011.6.35.8.4
Indicate the line template item.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

hwhdslActivationFailureCause 1.3.6.1.4.1.2011.6.35.8.5
Indicate the the reason of the active port fail.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING Size(0..1024)  

hwhdslChipsetID 1.3.6.1.4.1.2011.6.35.8.6
ChipsetID, the chipset id of the board.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

hwShdslTraps 1.3.6.1.4.1.2011.6.35.9
OBJECT IDENTIFIER    

hwShdslCommonTraps 1.3.6.1.4.1.2011.6.35.9.1
OBJECT IDENTIFIER    

hwShdslCommonTrapsPrefix 1.3.6.1.4.1.2011.6.35.9.1.0
OBJECT IDENTIFIER    

hwShdslAlarmTraps 1.3.6.1.4.1.2011.6.35.9.2
OBJECT IDENTIFIER    

hwShdslAlarmTrapsPrefix 1.3.6.1.4.1.2011.6.35.9.2.0
OBJECT IDENTIFIER    

hwShdslPortStatusChangeTrap 1.3.6.1.4.1.2011.6.35.9.1.0.1
shdsl port status change trap.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwShdslPortBindChangeTrap 1.3.6.1.4.1.2011.6.35.9.1.0.2
shdsl port bind change trap.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwShdslChipsetModeSwitchTrap 1.3.6.1.4.1.2011.6.35.9.1.0.3
shdsl chipset mode switch trap.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwShdslPortActRateLowerThresholdAlarmTrap 1.3.6.1.4.1.2011.6.35.9.2.0.1
The activation rate of the xDSL line is lower than the threshold.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwShdslSTUCSnrExceedThresholdAlarmTrap 1.3.6.1.4.1.2011.6.35.9.2.0.2
The STU-C SNR margin exceeds the threshold.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwShdslSTUCLoopAtteExceedThreAlarmTrap 1.3.6.1.4.1.2011.6.35.9.2.0.3
The STU-C loop attenuation exceeds the threshold.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwShdslSTUCESSExceedThreAlarmTrap 1.3.6.1.4.1.2011.6.35.9.2.0.4
The STU-C errored seconds (ESs) exceeds the threshold.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwShdslSTUCSESSExceedThreAlarmTrap 1.3.6.1.4.1.2011.6.35.9.2.0.5
The STU-C severely errored seconds (SESs) exceeds the threshold.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwShdslSTUCCRCErrExceedThreAlarmTrap 1.3.6.1.4.1.2011.6.35.9.2.0.6
The STU-C CRC errors exceeds the threshold.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwShdslSTUCLOSWExceedThreAlarmTrap 1.3.6.1.4.1.2011.6.35.9.2.0.7
The STU-C loss of synchronization word (LOSW) exceeds the threshold.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwShdslSTUCUASSExceedThreAlarmTrap 1.3.6.1.4.1.2011.6.35.9.2.0.8
The STU-C unavailable seconds (UASs) exceeds the threshold.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwShdslSTURPowerOffThreAlarmTrap 1.3.6.1.4.1.2011.6.35.9.2.0.9
The G.SHDSL STU-R is powered off.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwShdslPortAutoDeactiveAlarmTrap 1.3.6.1.4.1.2011.6.35.9.2.0.10
The G.SHDSL port is automatically deactivated due to the line fault.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwShdslPortReactiveAlarmTrap 1.3.6.1.4.1.2011.6.35.9.2.0.11
The G.SHDSL port is re-activated after the line recovers.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwShdslConfigParaFailedActivateAlarmTrap 1.3.6.1.4.1.2011.6.35.9.2.0.12
The G.SHDSL line configuration parameters fail to activate the port.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwShdslChipsetNotAvailableAlarmTrap 1.3.6.1.4.1.2011.6.35.9.2.0.13
The G.SHDSL chipset is not available.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwShdslChipsetRecoverAlarmTrap 1.3.6.1.4.1.2011.6.35.9.2.0.14
The G.SHDSL chipset recovers from a fault.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwShdslPortDeactiveAlarmTrap 1.3.6.1.4.1.2011.6.35.9.2.0.15
Some xDSL ports or all the xDSL ports are automatically deactivated due to lack of licenses.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwShdslEndpointCurrTable 1.3.6.1.4.1.2011.6.35.10
This table contains current status and performance information for segment endpoints in HDSL2/SHDSL lines. As with other tables in this MIB module indexed by ifIndex, entries in this table MUST be maintained in a persistent manner.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwShdslEndpointCurrEntry

hwShdslEndpointCurrEntry 1.3.6.1.4.1.2011.6.35.10.1
This table contains current status and performance information for segment endpoints in HDSL2/SHDSL lines.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwShdslEndpointCurrEntry  

hwShdslEndpointCurr15MinStartTime 1.3.6.1.4.1.2011.6.35.10.1.1
Start time of the current 15-minute performance statistics.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

hwShdslEndpointCurr1DayStartTime 1.3.6.1.4.1.2011.6.35.10.1.2
Start time of the current 1-day performance statistics.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

hwShdsl15MinIntervalTable 1.3.6.1.4.1.2011.6.35.11
This table provides one row for each HDSL2/SHDSL endpoint performance data collection interval. This table contains live data from equipment. As such, it is NOT persistent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwShdsl15MinIntervalEntry

hwShdsl15MinIntervalEntry 1.3.6.1.4.1.2011.6.35.11.1
This table provides one row for each HDSL2/SHDSL endpoint performance data collection interval. This table contains live data from equipment. As such, it is NOT persistent.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwShdsl15MinIntervalEntry  

hwShdsl15MinIntervalStartTime 1.3.6.1.4.1.2011.6.35.11.1.1
Start time of the historical 15-minute performance statistics.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

hwShdsl1DayIntervalTable 1.3.6.1.4.1.2011.6.35.12
This table provides one row for each HDSL2/SHDSL endpoint performance data collection interval. This table contains live data from equipment. As such, it is NOT persistent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwShdsl1DayIntervalEntry

hwShdsl1DayIntervalEntry 1.3.6.1.4.1.2011.6.35.12.1
This table provides one row for each HDSL2/SHDSL endpoint performance data collection interval.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwShdsl1DayIntervalEntry  

hwShdsl1DayIntervalStartTime 1.3.6.1.4.1.2011.6.35.12.1.1
Start time of the historical 1-day performance statistics.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

hwShdslConformance 1.3.6.1.4.1.2011.6.35.13
OBJECT IDENTIFIER    

hwShdslCompliances 1.3.6.1.4.1.2011.6.35.13.1
OBJECT IDENTIFIER    

hwShdslCompliance 1.3.6.1.4.1.2011.6.35.13.1.1
The compliance statement for systems supporting this module.
Status: current Access: read-only
MODULE-COMPLIANCE    

hwShdslObjectGroups 1.3.6.1.4.1.2011.6.35.13.2
OBJECT IDENTIFIER    

hwShdslPortBindConfGroup 1.3.6.1.4.1.2011.6.35.13.2.1
shdsl port bing group configuration.
Status: current Access: read-only
OBJECT-GROUP    

hwShdslPortBindGroup 1.3.6.1.4.1.2011.6.35.13.2.2
This table supports the configuration of port type in the SLC and SLF board.
Status: current Access: read-only
OBJECT-GROUP    

hwShdslChipsetModeGroup 1.3.6.1.4.1.2011.6.35.13.2.3
This table supports the configuration of the chipset mode of SHDSL board.
Status: current Access: read-only
OBJECT-GROUP    

hwShdslSpanConfProfileGroup 1.3.6.1.4.1.2011.6.35.13.2.4
This table supports the configuration of the modulation mode of SHDSL line-profile.
Status: current Access: read-only
OBJECT-GROUP    

hwShdslSpanStatusGroup 1.3.6.1.4.1.2011.6.35.13.2.5
This table supports the status information of the modulation mode of SHDSL line-profile.
Status: current Access: read-only
OBJECT-GROUP    

hwShdslCrossTalkCanellationGroupGroup 1.3.6.1.4.1.2011.6.35.13.2.6
This table supports the configuration of the cross talk cancellation group.
Status: current Access: read-only
OBJECT-GROUP    

hwShdslTrapsVbOidsGroup 1.3.6.1.4.1.2011.6.35.13.2.7
This table contains Shdsl traps Vb Oids.
Status: current Access: read-only
OBJECT-GROUP    

hwShdslTrapsGroup 1.3.6.1.4.1.2011.6.35.13.2.8
This table contains Shdsl traps.
Status: current Access: read-only
NOTIFICATION-GROUP    

hwShdslEndpointCurrGroup 1.3.6.1.4.1.2011.6.35.13.2.9
This table contains current status and performance information for segment endpoints in HDSL2/SHDSL lines.
Status: current Access: read-only
OBJECT-GROUP    

hwShdsl15MinIntervalGroup 1.3.6.1.4.1.2011.6.35.13.2.10
This table provides one row for each HDSL2/SHDSL endpoint performance data collection interval.
Status: current Access: read-only
OBJECT-GROUP    

hwShdsl1DayIntervalGroup 1.3.6.1.4.1.2011.6.35.13.2.11
This table provides one row for each HDSL2/SHDSL endpoint performance data collection interval.
Status: current Access: read-only
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor