HUAWEI-R2-MIB

Imported modules

SNMPv2-SMI	SNMPv2-CONF	SNMPv2-TC
HUAWEI-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	NOTIFICATION-TYPE
private	MODULE-COMPLIANCE	OBJECT-GROUP
NOTIFICATION-GROUP	TEXTUAL-CONVENTION	IpAddress
TimeTicks	Counter32	Integer32
RowStatus	DisplayString	huaweiUtility

Defined Types

HwR2ProfileEntry
SEQUENCE
	hwR2ProfileIndex	Integer32
	hwSignalName	OCTET STRING
	hwSignalType	Integer32
	hwR2SignalProfileRowStatus	RowStatus

HwRegisterSignalAttributeEntry
SEQUENCE
	hwRegisterSignalIndex	Integer32
	hwRegisterOutgoingSignalType	INTEGER
	hwSignalSendVoltage	Integer32
	hwBackPulseTime	Integer32
	hwDTMFSendTime	Integer32
	hwDTMFSendInterval	Integer32
	hwNoCallerPermit	INTEGER
	hwNumberMaxInterval	Integer32
	hwSignalKeepMaxTime	Integer32
	hwReceiveNumberMaxInterval	Integer32
	hwSignalStopPermitTime	Integer32
	hwWaitCallerCategoryTime	Integer32
	hwWaitBsignalTime	Integer32
	hwNumberSendMode	INTEGER
	hwCallingNumberMaxLength	Integer32
	hwCompellingSequenceKeepaliveTime	Integer32
	hwSendPulseSignal	INTEGER
	hwRegisterIncomingSignalType	INTEGER

HwLineSignalAttributeEntry
SEQUENCE
	hwLineSignalIndex	Integer32
	hwLineSignalType	INTEGER
	hwWaitSeizeAckTime	Integer32
	hwWaitAnswerTime	Integer32
	hwWaitClearForwardTime	Integer32
	hwWaitProtectTime	Integer32

HwAddressSendListEntry
SEQUENCE
	hwAddresssendInformationIndex	Integer32
	hwAddressSendInformationDI	INTEGER
	hwAddressSendInformationSI	INTEGER
	hwAddressSendInformationSC	INTEGER
	hwAddressSendInformationES	INTEGER
	hwAddressSendInformationCC	INTEGER
	hwAddressSendInformationDISC	INTEGER
	hwAddressSendInformationNAC	INTEGER
	hwAddressSendInformationSP	INTEGER

HwAddressReceiveListEntry
SEQUENCE
	hwAddressReceiveInformationIndex	Integer32
	hwAddressReceiveInformationDI	INTEGER
	hwAddressReceiveInformationSI	INTEGER
	hwAddressReceiveInformationSC	INTEGER
	hwAddressReceiveInformationES	INTEGER
	hwAddressReceiveInformationCC	INTEGER
	hwAddressReceiveInformationDISC	INTEGER
	hwAddressReceiveInformationNAC	INTEGER
	hwAddressReceiveInformationSP	INTEGER
	hwRequestCallerLineNoPosition	Integer32
	hwRequestCallerLineTypePosition	Integer32

HwR2SignalTypeEntry
SEQUENCE
	hwSignalTypeIndex	Integer32
	hwSignalTypeName	OCTET STRING

Defined Values

hwR2Protocol		1.3.6.1.4.1.2011.6.108
This MIB module defines MIB objects which provides R2 attribute management.
MODULE-IDENTITY

hwR2Objects		1.3.6.1.4.1.2011.6.108.1
OBJECT IDENTIFIER

hwR2ProfileTable		1.3.6.1.4.1.2011.6.108.1.1
R2 signaling profile table,this table is used to add,modify,del,query R2 profile templet. The index of this table is hwR2ProfileIndex
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwR2ProfileEntry

hwR2ProfileEntry		1.3.6.1.4.1.2011.6.108.1.1.1
R2 signaling profile table,this table is used to add,modify,del,query R2 profile templet. The index of this entry is hwR2ProfileIndex
Status: current	Access: not-accessible
OBJECT-TYPE
	HwR2ProfileEntry

hwR2ProfileIndex		1.3.6.1.4.1.2011.6.108.1.1.1.1
R2 signaling profile index
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..15

hwSignalName		1.3.6.1.4.1.2011.6.108.1.1.1.2
R2 signaling profile name
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..32)

hwSignalType		1.3.6.1.4.1.2011.6.108.1.1.1.3
R2 signaling type
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..15

hwR2SignalProfileRowStatus		1.3.6.1.4.1.2011.6.108.1.1.1.4
Row status of R2 signaling profile
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

hwRegisterSignalAttributeTable		1.3.6.1.4.1.2011.6.108.1.2
R2 register signaling attribute table,this table is used to set and query r2 profile register attribute The index of this table is hwRegisterSignalIndex
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwRegisterSignalAttributeEntry

hwRegisterSignalAttributeEntry		1.3.6.1.4.1.2011.6.108.1.2.1
R2 register signaling attribute table,this table is used to set and query r2 profile register attribute The index of this entry is hwRegisterSignalIndex
Status: current	Access: not-accessible
OBJECT-TYPE
	HwRegisterSignalAttributeEntry

hwRegisterSignalIndex		1.3.6.1.4.1.2011.6.108.1.2.1.1
R2 signaling profile index
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..15

hwRegisterOutgoingSignalType		1.3.6.1.4.1.2011.6.108.1.2.1.2
Signaling type of outgoing office register Options: 1. mfc(1)-the register outgoing signal type is mfc 2. pulse(2) -the register outgoing signal type is pulse 3. dtmf(3) -the register outgoing signal type is dtmf 4. mfp(4) -the register outgoing signal type is mfp 5. dpmfp(5) -the register outgoing signal type is dpmfp
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	mfc(1), pulse(2), dtmf(3), mfp(4), dpmfp(5)

hwSignalSendVoltage		1.3.6.1.4.1.2011.6.108.1.2.1.3
Register signal transmit level(dbm) 1:-25dBm 2:-24dBm 3:-23dBm 4:-22dBm 5:-21dBm 6:-20dBm 7:-19dBm 8:-18dBm 9:-17dBm 10:-16dBm 11:-15dBm 12:-14dBm 13:-13dBm 14:-12dBm 15:-11dBm 16:-10dBm 17:-9dBm 18:-8dBm 19:-7dBm 20:-6dBm 21:-5dBm 22:-4dBm 23:-3dBm}
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..23

hwBackPulseTime		1.3.6.1.4.1.2011.6.108.1.2.1.4
Backword pulse duration(Multiple of 10; unit: ms)
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	100..200

hwDTMFSendTime		1.3.6.1.4.1.2011.6.108.1.2.1.5
DTMF signal transmit duration (ms)
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	50..200

hwDTMFSendInterval		1.3.6.1.4.1.2011.6.108.1.2.1.6
DTMF signal transmit interval (ms)
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	50..500

hwNoCallerPermit		1.3.6.1.4.1.2011.6.108.1.2.1.7
Can the call be established without a calling party Options: 1. yes(1)- permit send caller number 2. no(2) - not permit send caller number
Status: obsolete	Access: read-write
OBJECT-TYPE
	INTEGER	yes(1), no(2)

hwNumberMaxInterval		1.3.6.1.4.1.2011.6.108.1.2.1.8
Max. dialing interval (s)
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..60

hwSignalKeepMaxTime		1.3.6.1.4.1.2011.6.108.1.2.1.9
Max. signal duration (s)
Status: obsolete	Access: read-write
OBJECT-TYPE
	Integer32	1..30

hwReceiveNumberMaxInterval		1.3.6.1.4.1.2011.6.108.1.2.1.10
Max. interval of receiving calling(callee) signals (s)
Status: obsolete	Access: read-write
OBJECT-TYPE
	Integer32	1..60

hwSignalStopPermitTime		1.3.6.1.4.1.2011.6.108.1.2.1.11
Max. duration of signal interruption
Status: obsolete	Access: read-write
OBJECT-TYPE
	Integer32	1..30

hwWaitCallerCategoryTime		1.3.6.1.4.1.2011.6.108.1.2.1.12
Wait time for receiving calling party type (s)
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..60

hwWaitBsignalTime		1.3.6.1.4.1.2011.6.108.1.2.1.13
Wait time for receiving group B signal (s)
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..60

hwNumberSendMode		1.3.6.1.4.1.2011.6.108.1.2.1.14
Signal transmit mode Options: 1. immediate(1)- number send immediately 2. delay(2) - number send delay
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	immediate(1), delay(2)

hwCallingNumberMaxLength		1.3.6.1.4.1.2011.6.108.1.2.1.15
Max. length of calling number
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..32

hwCompellingSequenceKeepaliveTime		1.3.6.1.4.1.2011.6.108.1.2.1.16
Compelling sequence keepalive time for register signaling (ms)
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..60000

hwSendPulseSignal		1.3.6.1.4.1.2011.6.108.1.2.1.17
Whether to send sending-finished signals Options: 1. yes(1)- send pulse signal 2. no(2) - do not send pulse signal
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	yes(1), no(2)

hwRegisterIncomingSignalType		1.3.6.1.4.1.2011.6.108.1.2.1.18
Signaling type of incoming office register Options: 1. mfc(1)-the register incoming signal type is mfc 2. pulse(2) -the register incoming signal type is pulse 3. dtmf(3) -the register incoming signal type is dtmf 4. mfp(4) -the register incoming signal type is mfp 5. dpmfp(5) -the register incoming signal type is dpmfp
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	mfc(1), pulse(2), dtmf(3), mfp(4), dpmfp(5)

hwLineSignalAttributeTable		1.3.6.1.4.1.2011.6.108.1.3
R2 line signaling attribute table,this table is used to set and query r2 profile line signal attribute. The index of this table is hwLineSignalIndex
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwLineSignalAttributeEntry

hwLineSignalAttributeEntry		1.3.6.1.4.1.2011.6.108.1.3.1
R2 line signaling attribute table,this table is used to set and query r2 profile line signal attribute. The index of this entry is hwLineSignalIndex
Status: current	Access: not-accessible
OBJECT-TYPE
	HwLineSignalAttributeEntry

hwLineSignalIndex		1.3.6.1.4.1.2011.6.108.1.3.1.1
R2 profile index
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..15

hwLineSignalType		1.3.6.1.4.1.2011.6.108.1.3.1.2
Line signaling type Options: 1. l1b(1)-line signal type is l1b 2. l2b(2) -line signal type is l2b 3. l3b(3) -line signal type is l3b 4. pulse(4) -line signal type is pulse
Status: obsolete	Access: read-write
OBJECT-TYPE
	INTEGER	l1b(1), l2b(2), l3b(3), pulse(4)

hwWaitSeizeAckTime		1.3.6.1.4.1.2011.6.108.1.3.1.3
Wait time for receiving occupation verification signal (ms)
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..7000

hwWaitAnswerTime		1.3.6.1.4.1.2011.6.108.1.3.1.4
Wait time for receiving answer signal (s)
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..511

hwWaitClearForwardTime		1.3.6.1.4.1.2011.6.108.1.3.1.5
Wait time for receiving forward release signal (ms)
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..2000

hwWaitProtectTime		1.3.6.1.4.1.2011.6.108.1.3.1.6
Wait time for receiving release protection signal (ms)
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..2000

hwAddressSendListTable		1.3.6.1.4.1.2011.6.108.1.4
Attribute table for sent R2 address,this table is used to set and query register address send attribute. The index of this table is hwAddresssendInformationIndex
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwAddressSendListEntry

hwAddressSendListEntry		1.3.6.1.4.1.2011.6.108.1.4.1
Attribute table for sent R2 address,this table is used to set and query register address send attribute. The index of this entry is hwAddresssendInformationIndex
Status: current	Access: not-accessible
OBJECT-TYPE
	HwAddressSendListEntry

hwAddresssendInformationIndex		1.3.6.1.4.1.2011.6.108.1.4.1.1
R2 profile index
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..15

hwAddressSendInformationDI		1.3.6.1.4.1.2011.6.108.1.4.1.2
Whether to send called numbers Options: 1. yes(1)-register signal address send callee number
Status: obsolete	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1)

hwAddressSendInformationSI		1.3.6.1.4.1.2011.6.108.1.4.1.3
Whether to send calling numbers Options: 1. yes(1)-register signal address send caller number 2. no(2)-register signal address does not send caller number
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	yes(1), no(2)

hwAddressSendInformationSC		1.3.6.1.4.1.2011.6.108.1.4.1.4
Whether to send calling party types Options: 1. yes(1)-register signal address send caller type
Status: obsolete	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1)

hwAddressSendInformationES		1.3.6.1.4.1.2011.6.108.1.4.1.5
Whether to send echo cancelation info Options: 1. yes(1)-register signal address send echo suppression 2. no(2)-register signal address does not send echo suppression
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	yes(1), no(2)

hwAddressSendInformationCC		1.3.6.1.4.1.2011.6.108.1.4.1.6
Whether to send country code Options: 1. yes(1)-register signal address send country code 2. no(2)-register signal address does not send country code
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	yes(1), no(2)

hwAddressSendInformationDISC		1.3.6.1.4.1.2011.6.108.1.4.1.7
Whether to send separating signaling Options: 1. yes(1)-register signal address send discrimination flag 2. no(2)-register signal address does not send discrimination flag
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	yes(1), no(2)

hwAddressSendInformationNAC		1.3.6.1.4.1.2011.6.108.1.4.1.8
Whether to send circuit basic info Options: 1. yes(1)-register signal address send circuit character 2. no(2)-register signal address does not send circuit character
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	yes(1), no(2)

hwAddressSendInformationSP		1.3.6.1.4.1.2011.6.108.1.4.1.9
Whether to send the calling priority Options: 1. yes(1)-register signal address send caller priority 2. no(2)-register signal address does not send caller priority
Status: obsolete	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

hwAddressReceiveListTable		1.3.6.1.4.1.2011.6.108.1.5
Attribute table for received R2 address,this table is used to set and query register signal address receive attribute The index of this table is hwAddressReceiveInformationIndex
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwAddressReceiveListEntry

hwAddressReceiveListEntry		1.3.6.1.4.1.2011.6.108.1.5.1
Attribute table for received R2 address,this table is used to set and query register signal address receive attribute The index of this entry is hwAddressReceiveInformationIndex
Status: current	Access: not-accessible
OBJECT-TYPE
	HwAddressReceiveListEntry

hwAddressReceiveInformationIndex		1.3.6.1.4.1.2011.6.108.1.5.1.1
R2 profile index
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..15

hwAddressReceiveInformationDI		1.3.6.1.4.1.2011.6.108.1.5.1.2
Whether to receive called numbers Options: 1. yes(1)-register signal address receive callee number
Status: obsolete	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1)

hwAddressReceiveInformationSI		1.3.6.1.4.1.2011.6.108.1.5.1.3
Whether to receive calling numbers Options: 1. yes(1)-register signal address receive calling number 2. no(2)-register signal address does not receive calling number
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	yes(1), no(2)

hwAddressReceiveInformationSC		1.3.6.1.4.1.2011.6.108.1.5.1.4
Whether to receive calling party types Options: 1. yes(1)-register signal address receive calling user type 2. no(2)-register signal address does not receive calling user type
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	yes(1), no(2)

hwAddressReceiveInformationES		1.3.6.1.4.1.2011.6.108.1.5.1.5
Whether to receive echo cancelation info Options: 1. yes(1)-register signal address receive echo suppression 2. no(2)-register signal address does not receive echo suppression
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	yes(1), no(2)

hwAddressReceiveInformationCC		1.3.6.1.4.1.2011.6.108.1.5.1.6
Whether to receive country code Options: 1. yes(1)-register signal address receive country code 2. no(2)-register signal address does not receive country code
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	yes(1), no(2)

hwAddressReceiveInformationDISC		1.3.6.1.4.1.2011.6.108.1.5.1.7
Whether to receive separating signaling Options: 1. yes(1)-register signal address receive distinctive indication 2. no(2)-register signal address does not receive distinctive indication
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	yes(1), no(2)

hwAddressReceiveInformationNAC		1.3.6.1.4.1.2011.6.108.1.5.1.8
Whether to receive circuit basic info Options: 1. yes(1)-register signal address receive circuit character 2. no(2)-register signal address does not receive circuit character
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	yes(1), no(2)

hwAddressReceiveInformationSP		1.3.6.1.4.1.2011.6.108.1.5.1.9
Whether to receive calling priority Options: 1. yes(1)-register signal address receive caller priority 2. no(2)-register signal address does not receive caller priority
Status: obsolete	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

hwRequestCallerLineNoPosition		1.3.6.1.4.1.2011.6.108.1.5.1.10
Called number digits before requesting calling number (The calling number must be requested after the calling party type.)
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..12

hwRequestCallerLineTypePosition		1.3.6.1.4.1.2011.6.108.1.5.1.11
Called number digits before requesting calling party type (The calling party type must be requested before the calling number.)
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..12

hwR2SignalTypeVersionTable		1.3.6.1.4.1.2011.6.108.1.6
OBJECT IDENTIFIER

hwSignalTypeVersion		1.3.6.1.4.1.2011.6.108.1.6.1
Version of R2 signaling type file
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..10)

hwR2SignalTypeTable		1.3.6.1.4.1.2011.6.108.1.7
R2 signaling type table,this table is used to query R2 signal type information The index of this table is hwSignalTypeIndex
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwR2SignalTypeEntry

hwR2SignalTypeEntry		1.3.6.1.4.1.2011.6.108.1.7.1
R2 signaling type table,this table is used to query R2 signal type information The index of this entry is hwSignalTypeIndex
Status: current	Access: not-accessible
OBJECT-TYPE
	HwR2SignalTypeEntry

hwSignalTypeIndex		1.3.6.1.4.1.2011.6.108.1.7.1.1
R2 signaling type index
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..15

hwSignalTypeName		1.3.6.1.4.1.2011.6.108.1.7.1.2
R2 signaling type name The names of the preconfigured multiple countries adaption profiles with IDs ranging from 0 to 9 cannot be modified
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..32)