HUAWEI-PW-CMD-MIB

File: HUAWEI-PW-CMD-MIB.mib (193651 bytes)

Imported modules

HUAWEI-MIB IF-MIB INET-ADDRESS-MIB
SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
HUAWEI-PW-TC-MIB PW-STD-MIB

Imported symbols

hwMpls ifIndex InterfaceIndex
InetAddressType IpAddress Integer32
Unsigned32 Counter32 Counter64
OBJECT-TYPE MODULE-IDENTITY NOTIFICATION-TYPE
TruthValue TimeStamp RowStatus
TEXTUAL-CONVENTION OBJECT-GROUP NOTIFICATION-GROUP
PwVcType pwIndex pwType
pwID pwPeerAddrType pwPeerAddr

Defined Types

SignalProtocolType  
Set by the operator to indicate the protocol responsible for establishing this PW. The value 'static' is used in all cases where no maintenance protocol (PW signaling) is used to set up the PW, i.e. require configuration of entries in the PW tables including PW labels, etc. The value 'ldp' is used in case of signaling with the Pwid FEC element with LDP signaling. The value 'udp' is used of udp control protocol.
TEXTUAL-CONVENTION    
  INTEGER ldp(1), static(2), udp(3)  

VcStatusType  
The status of the PW and the interfaces affecting this PW.
TEXTUAL-CONVENTION    
  INTEGER down(1), up(2), plugout(3)  

HwPwCmdVcEntry  
SEQUENCE    
  hwPwCmdVcIndex Unsigned32
  hwPwCmdVcSignalProtocol SignalProtocolType
  hwPwCmdVcID Unsigned32
  hwPwCmdVcType PwVcType
  hwPwCmdVcPeerAddrType InetAddressType
  hwPwCmdVcPeerAddr IpAddress
  hwPwCmdVcStatus VcStatusType
  hwPwCmdVcInboundLabel Unsigned32
  hwPwCmdVcOutboundLabel Unsigned32
  hwPwCmdVcSwitchSignalProtocol SignalProtocolType
  hwPwCmdVcSwitchID Unsigned32
  hwPwCmdVcSwitchPeerAddrType InetAddressType
  hwPwCmdVcSwitchPeerAddr IpAddress
  hwPwCmdVcSwitchInboundLabel Unsigned32
  hwPwCmdVcSwitchOutboundLabel Unsigned32
  hwPwCmdVcGroupID Unsigned32
  hwPwCmdVcIfIndex InterfaceIndex
  hwPwCmdVcAcStatus INTEGER
  hwPwCmdVcMtu Unsigned32
  hwPwCmdVcCw TruthValue
  hwPwCmdVcVCCV BITS
  hwPwCmdVcBandwidth Unsigned32
  hwPwCmdVcMaxAtmCells Unsigned32
  hwPwCmdVcTnlPolicyName OCTET STRING
  hwPwCmdVcQoSBehaviorIndex Unsigned32
  hwPwCmdVcExplicitPathName OCTET STRING
  hwPwCmdVcTemplateIndex Unsigned32
  hwPwCmdVcSecondary TruthValue
  hwPwCmdVcUpTime TimeStamp
  hwPwCmdVcRowStatus RowStatus

HwPwCmdVcTnlEntry  
SEQUENCE    
  hwPwCmdVcTnlIndex Unsigned32

HwPwCmdRemoteVcEntry  
SEQUENCE    
  hwPwCmdRemoteVcID Unsigned32
  hwPwCmdRemoteVcType PwVcType
  hwPwCmdRemoteVcStatus VcStatusType
  hwPwCmdRemoteVcGroupID Unsigned32
  hwPwCmdRemoteVcMtu Unsigned32
  hwPwCmdRemoteVcCw TruthValue
  hwPwCmdRemoteVcMaxAtmCells Unsigned32
  hwPwCmdRemoteVcNotif TruthValue
  hwPwCmdRemoteVcSwitchID Unsigned32
  hwPwCmdRemoteVcSwitchType PwVcType
  hwPwCmdRemoteVcSwitchStatus VcStatusType
  hwPwCmdRemoteVcSwitchGroupID Unsigned32
  hwPwCmdRemoteVcSwitchMtu Unsigned32
  hwPwCmdRemoteVcSwitchCw TruthValue
  hwPwCmdRemoteVcSwitchMaxAtmCells Unsigned32
  hwPwCmdRemoteVcSwitchNotif TruthValue

HwPwCmdAcBindingEntry  
SEQUENCE    
  hwPwCmdAcBindingConnectIndex Unsigned32
  hwPwCmdAcBindingVcID Unsigned32
  hwPwCmdAcBindingVcStatus VcStatusType
  hwPwCmdAcBindingTemplateName OCTET STRING
  hwPwCmdAcBindingOutboundVpi Integer32
  hwPwCmdAcBindingOutboundVci Integer32
  hwPwCmdAcBindingSignalProtocol SignalProtocolType
  hwPwCmdAcBindingOutboundLabel Integer32
  hwPwCmdAcBindingInboundLabel Integer32
  hwPwCmdAcBindingRowStatus RowStatus
  hwPwCmdAcBindingPrimOrSecondary INTEGER

HwPwCmdTemplateEntry  
SEQUENCE    
  hwPwCmdTemplateIndex Unsigned32
  hwPwCmdTemplateName OCTET STRING
  hwPwCmdTemplateVcType PwVcType
  hwPwCmdTemplatePeerAddrType InetAddressType
  hwPwCmdTemplatePeerAddr IpAddress
  hwPwCmdTemplateMtu Unsigned32
  hwPwCmdTemplateCw TruthValue
  hwPwCmdTemplateVCCV BITS
  hwPwCmdTemplateFrag TruthValue
  hwPwCmdTemplateBandwidth Unsigned32
  hwPwCmdTemplateMaxAtmCells Unsigned32
  hwPwCmdTemplateTnlPolicyName OCTET STRING
  hwPwCmdTemplateQoSBehaviorIndex Integer32
  hwPwCmdTemplateExplicitPathName OCTET STRING
  hwPwCmdTemplateTdmJitterBuffer Unsigned32
  hwPwCmdTemplateTdmLoadTime Unsigned32
  hwPwCmdTemplateTdmRTP INTEGER
  hwPwCmdTemplateRowStatus RowStatus
  hwPwCmdTemplateTdmTimeSlotNum Unsigned32
  hwPwCmdTemplateMaxEncapcellDelay Unsigned32
  hwPwCmdTemplateFlowLabel BITS

HwPwCmdOperEntry  
SEQUENCE    
  hwPwCmdOperIndex Unsigned32
  hwPwCmdOperType INTEGER
  hwPwCmdOperVcOrPwtIndex Unsigned32
  hwPwCmdOperStatus INTEGER
  hwPwCmdOperTimeStamp TimeStamp
  hwPwCmdOperRowStatus RowStatus

HwPwCmdAcVlanBindingEntry  
SEQUENCE    
  hwPwCmdAcVlanBindingVlanID Unsigned32
  hwPwCmdAcVlanBindingVcID Unsigned32
  hwPwCmdAcVlanBindingVcStatus VcStatusType
  hwPwCmdAcVlanBindingTemplateName OCTET STRING
  hwPwCmdAcVlanBindingSignalProtocol SignalProtocolType
  hwPwCmdAcVlanBindingOutboundLabel Integer32
  hwPwCmdAcVlanBindingInboundLabel Integer32
  hwPwCmdAcVlanBindingRowStatus RowStatus
  hwPwCmdAcVlanBindingPrimOrSecondary INTEGER

HwPwCmdAcPvpBindingEntry  
SEQUENCE    
  hwPwCmdAcPvpBindingVpi Unsigned32
  hwPwCmdAcPvpBindingVcID Unsigned32
  hwPwCmdAcPvpBindingVcStatus VcStatusType
  hwPwCmdAcPvpBindingTemplateName OCTET STRING
  hwPwCmdAcPvpBindingOutboundVpi Integer32
  hwPwCmdAcPvpBindingSignalProtocol SignalProtocolType
  hwPwCmdAcPvpBindingOutboundLabel Integer32
  hwPwCmdAcPvpBindingInboundLabel Integer32
  hwPwCmdAcPvpBindingPrimOrSecondary INTEGER
  hwPwCmdAcPvpBindingRowStatus RowStatus

HwPwCmdVccvEntry  
SEQUENCE    
  hwPwCmdVccvVcID Unsigned32
  hwPwCmdVccvReplyMode INTEGER
  hwPwCmdVccvFrequency INTEGER
  hwPwCmdVccvTimeoutLimit Unsigned32
  hwPwCmdVccvRecoverLimit Unsigned32
  hwPwCmdVccvRemotePwVcID Unsigned32
  hwPwCmdVccvRemoteIpAddress IpAddress
  hwPwCmdVccvTtl Unsigned32
  hwPwCmdVccvPingStatus INTEGER
  hwPwCmdVccvPingSuccessNum Unsigned32
  hwPwCmdVccvPingTimeOutNum Unsigned32
  hwPwCmdVccvRowStatus RowStatus
  hwPwCmdVccvPingPipeUniform INTEGER

HwPwCmdRecoverEntry  
SEQUENCE    
  hwPwCmdRecoverVcID Unsigned32
  hwPwCmdRecoverType INTEGER
  hwPwCmdRecoverWtrtime Unsigned32

HwPwCmdManualSwitchoverEntry  
SEQUENCE    
  hwPwCmdManualSwitchoverVcID Unsigned32
  hwPwCmdManualSwitchoverSwitchType INTEGER

HwPwCmdSwitchoverIpAddrEntry  
SEQUENCE    
  hwPwCmdSwitchoverPwId Unsigned32
  hwPwCmdSwitchoverLocalIpAddr IpAddress
  hwPwCmdSwitchoverRemoteIpAddr IpAddress
  hwPwCmdSwitchoverRowStatus RowStatus

HwPwCmdPsStatusEntry  
SEQUENCE    
  hwPwCmdPsPwId Unsigned32
  hwPwCmdPsPrimaryPwStatus INTEGER
  hwPwCmdPsSecondaryPwStatus INTEGER

HwPwCmdPvcExpMapEntry  
SEQUENCE    
  hwPwCmdPvcExpMapVpi Unsigned32
  hwPwCmdPvcExpMapVci Unsigned32
  hwPwCmdPvcExpMapExp Unsigned32
  hwPwCmdPvcExpMapRowStatus RowStatus

HwPwCmdExpCosMapEntry  
SEQUENCE    
  hwPwCmdExpCosMapExp Unsigned32
  hwPwCmdExpCosMapCos Unsigned32

HwPwCmdTdmExpMapEntry  
SEQUENCE    
  hwPwCmdTdmConnectId Unsigned32
  hwPwCmdTdmExpMapExp Unsigned32
  hwPwCmdTdmExpMapRowStatus RowStatus

HwPwCmdAcTdmBindingEntry  
SEQUENCE    
  hwPwCmdAcTdmBindingTdmConnectId Unsigned32
  hwPwCmdAcTdmBindingVcID Unsigned32
  hwPwCmdAcTdmBindingVcStatus VcStatusType
  hwPwCmdAcTdmBindingTemplateName OCTET STRING
  hwPwCmdAcTdmBindingEncapUDPPort Integer32
  hwPwCmdAcTdmBindingSignalProtocol SignalProtocolType
  hwPwCmdAcTdmBindingOutboundLabel Integer32
  hwPwCmdAcTdmBindingInboundLabel Integer32
  hwPwCmdAcTdmBindingPrimOrSecondary INTEGER
  hwPwCmdAcTdmBindingRowStatus RowStatus

HwPwCmdPwEntry  
SEQUENCE    
  hwPwCmdPwID Unsigned32
  hwPwCmdPwTemplateName OCTET STRING
  hwPwCmdPwAcBindMode INTEGER
  hwPwCmdPwVlanID Unsigned32
  hwPwCmdPwTdmVclID Unsigned32
  hwPwCmdPwIfindex Integer32
  hwPwCmdPwVci Integer32
  hwPwCmdPwVpi Integer32
  hwPwCmdPwOutboundVci Integer32
  hwPwCmdPwOutboundVpi Integer32
  hwPwCmdPwImaGroup Unsigned32
  hwPwCmdPwVcStatus VcStatusType
  hwPwCmdPwEncapSrcUDPPort Integer32
  hwPwCmdPwEncapDstUDPPort Integer32
  hwPwCmdPwSignalProtocol SignalProtocolType
  hwPwCmdPwOutboundLabel Integer32
  hwPwCmdPwInboundLabel Unsigned32
  hwPwCmdPwPriority INTEGER
  hwPwCmdPwRowStatus RowStatus
  hwPwCmdPwDesc OCTET STRING
  hwPwCmdPwReceiveDstUDPPort Integer32
  hwPwCmdPwMultiPvc OCTET STRING
  hwPwCmdPwMultiPvcOp INTEGER

HwPwCmdPwCarEntry  
SEQUENCE    
  hwPwCmdPWCarVcID Unsigned32
  hwPwCmdPWCarCir Unsigned32
  hwPwCmdPWCarCbs Unsigned32
  hwPwCmdPWCarPir Unsigned32
  hwPwCmdPWCarPbs Unsigned32
  hwPwCmdPWCarRowStatus RowStatus

HwPwCmdPvpExpMapEntry  
SEQUENCE    
  hwPwCmdPvpExpMapVpi Unsigned32
  hwPwCmdPvpExpMapExp Unsigned32
  hwPwCmdPvpExpMapRowStatus RowStatus

HwPwExtEntry  
SEQUENCE    
  hwPwPriority INTEGER
  hwPwPrimaryPwIndex Unsigned32
  hwPwVCCVCapabilities BITS
  hwPwVCCVStatus BITS
  hwPwFlowLabel BITS
  hwPwAtmCfgTimeout Unsigned32
  hwPwPriMappingProfName OCTET STRING
  hwPwFlowLabelCapabilities BITS
  hwPwFlowlabelStatus BITS
  hwPwStatisticSwitch INTEGER
  hwPwTnlPolicy OCTET STRING

HwPwCmdTdmDefectStatsEntry  
SEQUENCE    
  hwPwCmdTdmDefectStatsJtrBfrOverRun Counter32
  hwPwCmdTdmDefectStatsJtrBfrOverRunClear Counter32
  hwPwCmdTdmDefectStatsJtrBfrUnderRun Counter32
  hwPwCmdTdmDefectStatsJtrBfrUnderRunClear Counter32
  hwPwCmdTdmDefectStatsR1 Counter32
  hwPwCmdTdmDefectStatsR1Clear Counter32
  hwPwCmdTdmDefectStatsLM010 Counter32
  hwPwCmdTdmDefectStatsLM010Clear Counter32
  hwPwCmdTdmDefectStatsLM100 Counter32
  hwPwCmdTdmDefectStatsLM100Clear Counter32

HwPwPriMappingEntry  
SEQUENCE    
  hwPwPriMappingProfileName OCTET STRING
  hwPwInboundInputPriList OCTET STRING
  hwPwInboundOutputPriList OCTET STRING
  hwPwOutboundInputPriList OCTET STRING
  hwPwOutboundOutputPriList OCTET STRING
  hwPwPriMappingProfileRowStatus RowStatus

HwPwCmdStatisticEntry  
SEQUENCE    
  hwPwCmdStatisticUpstreamOctectsP0 Counter64
  hwPwCmdStatisticUpstreamPacketsP0 Counter32
  hwPwCmdStatisticUpstreamOctectsP1 Counter64
  hwPwCmdStatisticUpstreamPacketsP1 Counter32
  hwPwCmdStatisticUpstreamOctectsP2 Counter64
  hwPwCmdStatisticUpstreamPacketsP2 Counter32
  hwPwCmdStatisticUpstreamOctectsP3 Counter64
  hwPwCmdStatisticUpstreamPacketsP3 Counter32
  hwPwCmdStatisticUpstreamOctectsP4 Counter64
  hwPwCmdStatisticUpstreamPacketsP4 Counter32
  hwPwCmdStatisticUpstreamOctectsP5 Counter64
  hwPwCmdStatisticUpstreamPacketsP5 Counter32
  hwPwCmdStatisticUpstreamOctectsP6 Counter64
  hwPwCmdStatisticUpstreamPacketsP6 Counter32
  hwPwCmdStatisticUpstreamOctectsP7 Counter64
  hwPwCmdStatisticUpstreamPacketsP7 Counter32
  hwPwCmdStatisticDownstreamOctectsP0 Counter64
  hwPwCmdStatisticDownstreamPacketsP0 Counter32
  hwPwCmdStatisticDownstreamOctectsP1 Counter64
  hwPwCmdStatisticDownstreamPacketsP1 Counter32
  hwPwCmdStatisticDownstreamOctectsP2 Counter64
  hwPwCmdStatisticDownstreamPacketsP2 Counter32
  hwPwCmdStatisticDownstreamOctectsP3 Counter64
  hwPwCmdStatisticDownstreamPacketsP3 Counter32
  hwPwCmdStatisticDownstreamOctectsP4 Counter64
  hwPwCmdStatisticDownstreamPacketsP4 Counter32
  hwPwCmdStatisticDownstreamOctectsP5 Counter64
  hwPwCmdStatisticDownstreamPacketsP5 Counter32
  hwPwCmdStatisticDownstreamOctectsP6 Counter64
  hwPwCmdStatisticDownstreamPacketsP6 Counter32
  hwPwCmdStatisticDownstreamOctectsP7 Counter64
  hwPwCmdStatisticDownstreamPacketsP7 Counter32
  hwPwCmdStatisticClear INTEGER

HwPwRedundancyEntry  
SEQUENCE    
  hwPwRedundancyMode INTEGER
  hwPwStreamDualReceiving INTEGER

HwPwCmdPwCarExtEntry  
SEQUENCE    
  hwPwCmdPwCarExtCir Unsigned32
  hwPwCmdPwCarExtCbs Unsigned32
  hwPwCmdPwCarExtPir Unsigned32
  hwPwCmdPwCarExtPbs Unsigned32
  hwPwCmdPwCarExtRowStatus RowStatus

HwPwAutoVccvEntry  
SEQUENCE    
  hwPwAutoVccvReplyMode INTEGER
  hwPwAutoVccvFrequency INTEGER
  hwPwAutoVccvTimeoutLimit Unsigned32
  hwPwAutoVccvRecoverLimit Unsigned32
  hwPwAutoVccvRemotePwID Unsigned32
  hwPwAutoVccvRemoteIpAddress IpAddress
  hwPwAutoVccvTtl Unsigned32
  hwPwAutoVccvPingStatus INTEGER
  hwPwAutoVccvPingSuccessNum Unsigned32
  hwPwAutoVccvPingTimeOutNum Unsigned32
  hwPwAutoVccvStatisticsReset INTEGER
  hwPwAutoVccvPipeUniform INTEGER
  hwPwAutoVccvRowStatus RowStatus

Defined Values

hwPwCmdMIB 1.3.6.1.4.1.2011.5.12.8.1
Pseudo Wire Emulation Edge-to-Edge (PWE3) is an end-to-end L2 service bearing technology, that belongs to L2 VPN in the P2P mode. The system implements the PWE3 architecture through MPLS, by using the LDP or RSVP-TE protocol as signaling. Therefore, it can implement the ATM and Ethernet emulation services and establish the ATM or Ethernet private lines. Thus, it provides a solution to the emulation private line service in the IP network.
MODULE-IDENTITY    

hwPw 1.3.6.1.4.1.2011.5.12.8
OBJECT IDENTIFIER    

hwPwCmdVcNotifications 1.3.6.1.4.1.2011.5.12.8.1.1
OBJECT IDENTIFIER    

hwPwCmdVcSwitchWtoP 1.3.6.1.4.1.2011.5.12.8.1.1.1
This notification is generated when switch from working pw to protect pw happens.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwPwCmdVcSwitchPtoW 1.3.6.1.4.1.2011.5.12.8.1.1.2
This notification is generated when switch from protect pw to working pw happens.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwPwCmdVcUp 1.3.6.1.4.1.2011.5.12.8.1.1.3
This notification is generated when the vc status change from other status to up.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwPwCmdVcDown 1.3.6.1.4.1.2011.5.12.8.1.1.4
This notification is generated when the vc status change from other status to down.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwPwCmdObjects 1.3.6.1.4.1.2011.5.12.8.1.2
OBJECT IDENTIFIER    

hwPwCmdVcIndexNext 1.3.6.1.4.1.2011.5.12.8.1.2.1
This object contains an appropriate value to be used for hwPwCmdVcIndex when creating entries in the hwPwCmdVcTable. The value 0 indicates that no unassigned entries are available. To obtain the value of hwPwCmdVcIndex for a new entry in the hwPwCmdVcTable, the manager issues a management protocol retrieval operation to obtain the current value of hwPwCmdVcIndex. After each retrieval operation, the agent should modify the value to reflect the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwPwCmdVcTable 1.3.6.1.4.1.2011.5.12.8.1.2.2
This table specifies information for configuring and status monitoring that are common to all service types. The index of this table is hwPwCmdVcIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwPwCmdVcEntry

hwPwCmdVcEntry 1.3.6.1.4.1.2011.5.12.8.1.2.2.1
This table specifies information for configuring and status monitoring that are common to all service types. The index of this entry is hwPwCmdVcIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwPwCmdVcEntry  

hwPwCmdVcIndex 1.3.6.1.4.1.2011.5.12.8.1.2.2.1.1
Index for the conceptual row identifying a PW within this PW Emulation table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

hwPwCmdVcSignalProtocol 1.3.6.1.4.1.2011.5.12.8.1.2.2.1.2
Set by the operator to indicate the protocol responsible for establishing this PW. The value 'static' is used in all cases where no maintenance protocol (PW signaling) is used to set up the PW, i.e. require configuration of entries in the PW tables including PW labels, etc. The value 'ldp' is used in case of signaling with the Pwid FEC element with LDP signaling. The value 'rsvp' indicate the use of rsvp control protocol.
Status: current Access: read-create
OBJECT-TYPE    
  SignalProtocolType  

hwPwCmdVcID 1.3.6.1.4.1.2011.5.12.8.1.2.2.1.3
Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element'.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

hwPwCmdVcType 1.3.6.1.4.1.2011.5.12.8.1.2.2.1.4
This value indicate the service to be carried over this PW.
Status: current Access: read-create
OBJECT-TYPE    
  PwVcType  

hwPwCmdVcPeerAddrType 1.3.6.1.4.1.2011.5.12.8.1.2.2.1.5
Denotes the address type of the peer node. It should be set to 'unknown' if PE/PW maintenance protocol is not used and the address is unknown.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

hwPwCmdVcPeerAddr 1.3.6.1.4.1.2011.5.12.8.1.2.2.1.6
This object contains the value of the peer node address of the PW/PE maintenance protocol entity. This object SHOULD contain a value of all zeros if not applicable (hwPwCmdVcPeerAddrType is 'unknown').
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

hwPwCmdVcStatus 1.3.6.1.4.1.2011.5.12.8.1.2.2.1.7
Indicates the status of the PW in the local node.
Status: current Access: read-only
OBJECT-TYPE    
  VcStatusType  

hwPwCmdVcInboundLabel 1.3.6.1.4.1.2011.5.12.8.1.2.2.1.8
The PW label used in the inbound direction (i.e. packets received from the PSN. Range: 16-1023 It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents the 20 bits of PW tag, for L2TP it represent the 32 bits Session ID. If the label is not yet known (signaling in process), the object should return a value of 0xFFFF.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 16..1023  

hwPwCmdVcOutboundLabel 1.3.6.1.4.1.2011.5.12.8.1.2.2.1.9
The PW label used in the outbound direction (i.e. toward the PSN). Range: 16-1023 It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents the 20 bits of PW tag, for L2TP it represent the 32 bits Session ID. If the label is not yet known (signaling in process), the object should return a value of 0xFFFF.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 16..1023  

hwPwCmdVcSwitchSignalProtocol 1.3.6.1.4.1.2011.5.12.8.1.2.2.1.10
Set by the operator to indicate the protocol responsible for establishing this PW. The value 'static' is used in all cases where no maintenance protocol (PW signaling) is used to set up the PW, i.e. require configuration of entries in the PW tables including PW labels, etc. The value 'ldp' is used in case of signaling with the Pwid FEC element with LDP signaling. The value 'rsvp' indicate the use of rsvp control protocol.
Status: current Access: read-create
OBJECT-TYPE    
  SignalProtocolType  

hwPwCmdVcSwitchID 1.3.6.1.4.1.2011.5.12.8.1.2.2.1.11
Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element' of the switch pw.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

hwPwCmdVcSwitchPeerAddrType 1.3.6.1.4.1.2011.5.12.8.1.2.2.1.12
Denotes the address type of the peer node of the switch pw. It should be set to 'unknown' if PE/PW maintenance protocol is not used and the address is unknown.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

hwPwCmdVcSwitchPeerAddr 1.3.6.1.4.1.2011.5.12.8.1.2.2.1.13
This object contains the value of the peer node address of the switch pw of the PW/PE maintenance protocol entity. This object SHOULD contain a value of all zeros if not applicable (hwPwCmdVcSwitchPeerAddrType is 'unknown').
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

hwPwCmdVcSwitchInboundLabel 1.3.6.1.4.1.2011.5.12.8.1.2.2.1.14
The PW label used in the inbound direction (i.e. packets received from the PSN. Range: 16-1023 It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents the 20 bits of PW tag, for L2TP it represent the 32 bits Session ID. If the label is not yet known (signaling in process), the object should return a value of 0xFFFF.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 16..1023  

hwPwCmdVcSwitchOutboundLabel 1.3.6.1.4.1.2011.5.12.8.1.2.2.1.15
The PW label used in the outbound direction (i.e. toward the PSN). Range: 16-1023 It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents the 20 bits of PW tag, for L2TP it represent the 32 bits Session ID. If the label is not yet known (signaling in process), the object should return a value of 0xFFFF.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 16..1023  

hwPwCmdVcGroupID 1.3.6.1.4.1.2011.5.12.8.1.2.2.1.16
Used in the Group ID field sent to the peer PWES within the maintenance protocol used for PW setup. Applicable if pwVcOwner equal 'pwIdFecSignaling' or 'l2tpControlProtocol', should be set to zero otherwise.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwPwCmdVcIfIndex 1.3.6.1.4.1.2011.5.12.8.1.2.2.1.17
Index of the interface (or the virtual interface) associated with the PW.
Status: current Access: read-create
OBJECT-TYPE    
  InterfaceIndex  

hwPwCmdVcAcStatus 1.3.6.1.4.1.2011.5.12.8.1.2.2.1.18
Local AC status. Options: 1. down(1) -indicates AC status down 2. up(2) -indicates AC status up 3. plugout(3) -indicates AC status plugout
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER down(1), up(2), plugout(3)  

hwPwCmdVcMtu 1.3.6.1.4.1.2011.5.12.8.1.2.2.1.19
If not equal zero, the optional Mtu object in the signaling protocol will be sent with this value, representing the locally supported MTU size over the interface (or the virtual interface) associated with the PW.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

hwPwCmdVcCw 1.3.6.1.4.1.2011.5.12.8.1.2.2.1.20
If signaling is used for PW establishment, this object indicates the status of the control word negotiation, and in both signaling or manual configuration indicates if CW is to be present or not for this PW.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hwPwCmdVcVCCV 1.3.6.1.4.1.2011.5.12.8.1.2.2.1.21
Indicates the optional VCCV capabilities of the pw. Options: 1. ccCw(0) 2. ccAlert(1) 3. ccLabel(2) 4. cvIcmpping(3) 5. cvLspping(4) 6. cvBfd(5)
Status: current Access: read-create
OBJECT-TYPE    
  BITS ccCw(0), ccAlert(1), ccLabel(2), cvIcmpping(3), cvLspping(4), cvBfd(5)  

hwPwCmdVcBandwidth 1.3.6.1.4.1.2011.5.12.8.1.2.2.1.22
Indicates the bandwidth when signaling protocol is rsvp.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

hwPwCmdVcMaxAtmCells 1.3.6.1.4.1.2011.5.12.8.1.2.2.1.23
Indicates the max cell supported when vctype is atm.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwPwCmdVcTnlPolicyName 1.3.6.1.4.1.2011.5.12.8.1.2.2.1.24
Indicates the tunnel policy name used.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

hwPwCmdVcQoSBehaviorIndex 1.3.6.1.4.1.2011.5.12.8.1.2.2.1.25
Indicates the traffic behavior Index when QOS is implemented.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

hwPwCmdVcExplicitPathName 1.3.6.1.4.1.2011.5.12.8.1.2.2.1.26
Indicates the explicit path name set by the operator.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

hwPwCmdVcTemplateIndex 1.3.6.1.4.1.2011.5.12.8.1.2.2.1.27
Indicates the pw template index referenced.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

hwPwCmdVcSecondary 1.3.6.1.4.1.2011.5.12.8.1.2.2.1.28
Indicates whether or not the secondary pw is used.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hwPwCmdVcUpTime 1.3.6.1.4.1.2011.5.12.8.1.2.2.1.29
Specifies the total time this PW status has been Up(1).
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

hwPwCmdVcRowStatus 1.3.6.1.4.1.2011.5.12.8.1.2.2.1.30
For creating and modifying this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwPwCmdVcTnlTable 1.3.6.1.4.1.2011.5.12.8.1.2.3
This table provides per-PW related tunnel information. The indexes of this table are hwPwCmdVcIndex and hwPwCmdVcTnlIndex, hwPwCmdVcIndexis set in hwPwCmdVcTable table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwPwCmdVcTnlEntry

hwPwCmdVcTnlEntry 1.3.6.1.4.1.2011.5.12.8.1.2.3.1
This table provides per-PW related tunnel information. The indexes of this entry are hwPwCmdVcIndex and hwPwCmdVcTnlIndex, hwPwCmdVcIndexis set in hwPwCmdVcTable table.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwPwCmdVcTnlEntry  

hwPwCmdVcTnlIndex 1.3.6.1.4.1.2011.5.12.8.1.2.3.1.1
Indicates the tunnel index related to each PW.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwPwCmdRemoteVcTable 1.3.6.1.4.1.2011.5.12.8.1.2.4
This table provides remote PW information for each local PW.The index of this table is hwPwCmdRemoteVcID.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwPwCmdRemoteVcEntry

hwPwCmdRemoteVcEntry 1.3.6.1.4.1.2011.5.12.8.1.2.4.1
This table provides remote PW information for each local PW.The index of this entry is hwPwCmdRemoteVcID.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwPwCmdRemoteVcEntry  

hwPwCmdRemoteVcID 1.3.6.1.4.1.2011.5.12.8.1.2.4.1.1
Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element' of the remote PW.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwPwCmdRemoteVcType 1.3.6.1.4.1.2011.5.12.8.1.2.4.1.2
This value indicate the service to be carried over the remote PW.
Status: current Access: read-only
OBJECT-TYPE    
  PwVcType  

hwPwCmdRemoteVcStatus 1.3.6.1.4.1.2011.5.12.8.1.2.4.1.3
Indicates the status of the remote PW.
Status: current Access: read-only
OBJECT-TYPE    
  VcStatusType  

hwPwCmdRemoteVcGroupID 1.3.6.1.4.1.2011.5.12.8.1.2.4.1.4
Indicates the Group ID field of the remote PW.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwPwCmdRemoteVcMtu 1.3.6.1.4.1.2011.5.12.8.1.2.4.1.5
Indicates the supported MTU size of the remote PW.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwPwCmdRemoteVcCw 1.3.6.1.4.1.2011.5.12.8.1.2.4.1.6
Indicates the control word capability of the remote PW.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

hwPwCmdRemoteVcMaxAtmCells 1.3.6.1.4.1.2011.5.12.8.1.2.4.1.7
Indicates the max cell supported of the remote PW when vctype is atm.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwPwCmdRemoteVcNotif 1.3.6.1.4.1.2011.5.12.8.1.2.4.1.8
Indicates notification is supported by the remote PW.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

hwPwCmdRemoteVcSwitchID 1.3.6.1.4.1.2011.5.12.8.1.2.4.1.9
Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element' of the switch PW.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwPwCmdRemoteVcSwitchType 1.3.6.1.4.1.2011.5.12.8.1.2.4.1.10
This value indicate the service to be carried over the switch PW.
Status: current Access: read-only
OBJECT-TYPE    
  PwVcType  

hwPwCmdRemoteVcSwitchStatus 1.3.6.1.4.1.2011.5.12.8.1.2.4.1.11
Indicates the status of the switch PW.
Status: current Access: read-only
OBJECT-TYPE    
  VcStatusType  

hwPwCmdRemoteVcSwitchGroupID 1.3.6.1.4.1.2011.5.12.8.1.2.4.1.12
Indicates the Group ID field of the switch PW.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwPwCmdRemoteVcSwitchMtu 1.3.6.1.4.1.2011.5.12.8.1.2.4.1.13
Indicates the supported MTU size of the switch PW.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwPwCmdRemoteVcSwitchCw 1.3.6.1.4.1.2011.5.12.8.1.2.4.1.14
Indicates the control word capability of the switch PW.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

hwPwCmdRemoteVcSwitchMaxAtmCells 1.3.6.1.4.1.2011.5.12.8.1.2.4.1.15
Indicates the max cell supported of the switch PW when vctype is atm.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwPwCmdRemoteVcSwitchNotif 1.3.6.1.4.1.2011.5.12.8.1.2.4.1.16
Indicates notification is supported by the switch PW.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

hwPwCmdAcBindingTable 1.3.6.1.4.1.2011.5.12.8.1.2.5
This table specifies information for configuring and status monitoring for PW used in fixed network. The indexes of this table are hwPwCmdAcBindingConnectIndex and hwPwCmdAcBindingPrimOrSecondary.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwPwCmdAcBindingEntry

hwPwCmdAcBindingEntry 1.3.6.1.4.1.2011.5.12.8.1.2.5.1
This table specifies information for configuring and status monitoring for PW used in fixed network. The indexes of this entry are hwPwCmdAcBindingConnectIndex and hwPwCmdAcBindingPrimOrSecondary.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwPwCmdAcBindingEntry  

hwPwCmdAcBindingConnectIndex 1.3.6.1.4.1.2011.5.12.8.1.2.5.1.1
Indicates the connect index referenced. Range: 1-32768
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..32768  

hwPwCmdAcBindingVcID 1.3.6.1.4.1.2011.5.12.8.1.2.5.1.2
Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element'. Range: 1-4294967295
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..4294967295  

hwPwCmdAcBindingVcStatus 1.3.6.1.4.1.2011.5.12.8.1.2.5.1.3
Indicates the status of the PW: down(1), up(2), plugout(3).
Status: current Access: read-only
OBJECT-TYPE    
  VcStatusType  

hwPwCmdAcBindingTemplateName 1.3.6.1.4.1.2011.5.12.8.1.2.5.1.4
Indicates the description string of the template, MUST be NULL string if not applicable or not known yet.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..19)  

hwPwCmdAcBindingOutboundVpi 1.3.6.1.4.1.2011.5.12.8.1.2.5.1.5
VPI value of this ATM VC. Range: 0-4095 If the pwVcType is atmNto1Transparent then the value will be set to zero.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..4095  

hwPwCmdAcBindingOutboundVci 1.3.6.1.4.1.2011.5.12.8.1.2.5.1.6
VCI value of this ATM VC. Range: 32-65535 If the pwVcType is atmNto1Transparent, atmCell1to1Vpc or atmCellNto1Vpc then the value should be set to zero.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 32..65535  

hwPwCmdAcBindingSignalProtocol 1.3.6.1.4.1.2011.5.12.8.1.2.5.1.7
Set by the operator to indicate the protocol responsible for establishing this PW. The value 'static' is used in all cases where no maintenance protocol (PW signaling) is used to set up the PW, i.e. require configuration of entries in the PW tables including PW labels, etc. The value 'ldp' is used in case of signaling with the Pwid FEC element with LDP signaling. The value 'rsvp' indicate the use of rsvp control protocol.
Status: current Access: read-create
OBJECT-TYPE    
  SignalProtocolType  

hwPwCmdAcBindingOutboundLabel 1.3.6.1.4.1.2011.5.12.8.1.2.5.1.8
The PW label used in the outbound direction (i.e. toward the PSN). Range: 16-1048575 It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents the 20 bits of PW tag, for L2TP it represent the 32 bits Session ID. If the label is not yet known (signaling in process), the object should return a value of 0xFFFF.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 16..1048575  

hwPwCmdAcBindingInboundLabel 1.3.6.1.4.1.2011.5.12.8.1.2.5.1.9
The PW label used in the inbound direction (i.e. packets received from the PSN. Range: 16-1048575 It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents the 20 bits of PW tag, for L2TP it represent the 32 bits Session ID. If the label is not yet known (signaling in process), the object should return a value of 0xFFFF.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 16..1048575  

hwPwCmdAcBindingRowStatus 1.3.6.1.4.1.2011.5.12.8.1.2.5.1.10
For creating and modifying this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus 1..6  

hwPwCmdAcBindingPrimOrSecondary 1.3.6.1.4.1.2011.5.12.8.1.2.5.1.11
This value indicate Primary PW or Secondary PW. Options: 1. primaryPW(1) -indicates primary PW 2. secondaryPW(2) -indicates secondary PW
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER primaryPW(1), secondaryPW(2)  

hwPwCmdTemplateIndexNext 1.3.6.1.4.1.2011.5.12.8.1.2.6
This object contains an appropriate value to be used for hwPwCmdTemplateIndex when creating entries in the hwPwCmdTemplateTable. The value 0 indicates that no unassigned entries are available. To obtain the value of hwPwCmdTemplateIndex for a new entry in the hwPwCmdTemplateTable, the manager issues a management protocol retrieval operation to obtain the current value of hwPwCmdVcIndex. After each retrieval operation, the agent should modify the value to reflect the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwPwCmdTemplateTable 1.3.6.1.4.1.2011.5.12.8.1.2.7
This table specifies information for configuring and status monitoring to pw template. The index of this table is hwPwCmdTemplateIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwPwCmdTemplateEntry

hwPwCmdTemplateEntry 1.3.6.1.4.1.2011.5.12.8.1.2.7.1
This table specifies information for configuring and status monitoring to pw template. The index of this entry is hwPwCmdTemplateIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwPwCmdTemplateEntry  

hwPwCmdTemplateIndex 1.3.6.1.4.1.2011.5.12.8.1.2.7.1.1
Index for the conceptual row identifying a PW template within this PW template table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

hwPwCmdTemplateName 1.3.6.1.4.1.2011.5.12.8.1.2.7.1.2
Indicates the description string of the template, MUST be NULL string if not applicable or not known yet.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..19)  

hwPwCmdTemplateVcType 1.3.6.1.4.1.2011.5.12.8.1.2.7.1.3
This value indicate the service to be carried over this template.
Status: current Access: read-create
OBJECT-TYPE    
  PwVcType  

hwPwCmdTemplatePeerAddrType 1.3.6.1.4.1.2011.5.12.8.1.2.7.1.4
Denotes the address type of the peer node. It should be set to 'unknown' if PE/PW maintenance protocol is not used and the address is unknown.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

hwPwCmdTemplatePeerAddr 1.3.6.1.4.1.2011.5.12.8.1.2.7.1.5
This object contains the value of the peer node address of the PW/PE maintenance protocol entity. This object SHOULD contain a value of all zeros if not applicable (hwPwCmdTemplatePeerAddrType is 'unknown').
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

hwPwCmdTemplateMtu 1.3.6.1.4.1.2011.5.12.8.1.2.7.1.6
Indicates the supported MTU size of the switch PW. Range: 328-1710
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 328..1710  

hwPwCmdTemplateCw 1.3.6.1.4.1.2011.5.12.8.1.2.7.1.7
Indicates the control word capability of the switch PW.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hwPwCmdTemplateVCCV 1.3.6.1.4.1.2011.5.12.8.1.2.7.1.8
Indicates the optional VCCV capabilities of the pw. Options: 1. ccCw(0) 2. ccAlert(1) 3. ccLabel(2) 4. cvIcmpping(3) 5. cvLspping(4) 6. cvBfd(5)
Status: current Access: read-create
OBJECT-TYPE    
  BITS ccCw(0), ccAlert(1), ccLabel(2), cvIcmpping(3), cvLspping(4), cvBfd(5)  

hwPwCmdTemplateFrag 1.3.6.1.4.1.2011.5.12.8.1.2.7.1.9
Indicates whether or not fragmentation is supported.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hwPwCmdTemplateBandwidth 1.3.6.1.4.1.2011.5.12.8.1.2.7.1.10
Indicates the bandwidth when signaling protocol is rsvp.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

hwPwCmdTemplateMaxAtmCells 1.3.6.1.4.1.2011.5.12.8.1.2.7.1.11
Indicates the max ATM cells when encapsulation is ATM. Range: 1-31 Default: 1
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..31  

hwPwCmdTemplateTnlPolicyName 1.3.6.1.4.1.2011.5.12.8.1.2.7.1.12
Indicates the tunnel policy name used.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

hwPwCmdTemplateQoSBehaviorIndex 1.3.6.1.4.1.2011.5.12.8.1.2.7.1.13
Indicates the traffic behavior Index when QOS is implemented.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hwPwCmdTemplateExplicitPathName 1.3.6.1.4.1.2011.5.12.8.1.2.7.1.14
Indicates the explicit path name set by the operator.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

hwPwCmdTemplateTdmJitterBuffer 1.3.6.1.4.1.2011.5.12.8.1.2.7.1.15
Indicates the jitter buffer size of TDM PW. Range: 500-128000 Default: 2000 Unit: microsecond
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 500..128000  

hwPwCmdTemplateTdmLoadTime 1.3.6.1.4.1.2011.5.12.8.1.2.7.1.16
Indicates the load time value of TDM PW. Range: 125-5000 Default: 1000 Unit: byte
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 125..5000  

hwPwCmdTemplateTdmRTP 1.3.6.1.4.1.2011.5.12.8.1.2.7.1.17
Indicates enable or disable RTP of TDM PW. Options: 1. disable(0) -indicates disable RTP 2. enable(1) -indicates enable RTP Default: disable(0)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

hwPwCmdTemplateRowStatus 1.3.6.1.4.1.2011.5.12.8.1.2.7.1.18
For creating and modifying this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwPwCmdTemplateTdmTimeSlotNum 1.3.6.1.4.1.2011.5.12.8.1.2.7.1.19
Indicates the time slot Num of TDM PW. Range: 1-32 Default: 32 Unit: byte
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..32  

hwPwCmdTemplateMaxEncapcellDelay 1.3.6.1.4.1.2011.5.12.8.1.2.7.1.20
Indicates the Max ATM cells encapsulate delay time. Range: 0-50 Default: 0 Unit: millisecond
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..50  

hwPwCmdTemplateFlowLabel 1.3.6.1.4.1.2011.5.12.8.1.2.7.1.21
Indicates the optional flow label capabilities of the pw.
Status: current Access: read-create
OBJECT-TYPE    
  BITS sip(0), dip(1), smac(2), dmac(3)  

hwPwCmdOperTable 1.3.6.1.4.1.2011.5.12.8.1.2.8
This table specifies the reset operation that can be done to the PW or PW template. The index of this table is hwPwCmdOperIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwPwCmdOperEntry

hwPwCmdOperEntry 1.3.6.1.4.1.2011.5.12.8.1.2.8.1
This table specifies the reset operation that can be done to the PW or PW template. The index of this entry is hwPwCmdOperIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwPwCmdOperEntry  

hwPwCmdOperIndex 1.3.6.1.4.1.2011.5.12.8.1.2.8.1.1
Index for the conceptual row.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

hwPwCmdOperType 1.3.6.1.4.1.2011.5.12.8.1.2.8.1.2
Specifies the reset object. Options: 1. vcindex(1) -indicates PW index 2. pwtindex(2) -indicates PW template index
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER vcindex(1), pwtindex(2)  

hwPwCmdOperVcOrPwtIndex 1.3.6.1.4.1.2011.5.12.8.1.2.8.1.3
Specifies the object index to be reset.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

hwPwCmdOperStatus 1.3.6.1.4.1.2011.5.12.8.1.2.8.1.4
Indicates the result of the reset operation. Options: 1. success(1) -indicates operation success 2. pwNotExist(2) -indicates PW not exist 3. pwTemplateNotExist(3) -indicates PW template not exist 4. resetFailure(4) -indicates reset PW failure 5. unknown(5) -indicates unknown operation status
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER success(1), pwNotExist(2), pwTemplateNotExist(3), resetFailure(4), unknown(5)  

hwPwCmdOperTimeStamp 1.3.6.1.4.1.2011.5.12.8.1.2.8.1.5
Specifies the total time since last reset operation has been done.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

hwPwCmdOperRowStatus 1.3.6.1.4.1.2011.5.12.8.1.2.8.1.6
For creating and deleting this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwPwCmdVcSwitchNotifEnable 1.3.6.1.4.1.2011.5.12.8.1.2.9
If this object is set to true(1), then it enables the emission of hwPwCmdVcSwitchWtoP and hwPwCmdVcSwitchPtoW notifications; otherwise these notifications are not emitted, DEFVAL { false }
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hwPwCmdAcVlanBindingTable 1.3.6.1.4.1.2011.5.12.8.1.2.10
This table specifies information for configuring and status monitoring for PW used in fixed network. The indexes of this table are hwPwCmdAcVlanBindingVlanID and hwPwCmdAcVlanBindingPrimOrSecondary.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwPwCmdAcVlanBindingEntry

hwPwCmdAcVlanBindingEntry 1.3.6.1.4.1.2011.5.12.8.1.2.10.1
This table specifies information for configuring and status monitoring for PW used in fixed network. The indexes of this entry are hwPwCmdAcVlanBindingVlanID and hwPwCmdAcVlanBindingPrimOrSecondary.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwPwCmdAcVlanBindingEntry  

hwPwCmdAcVlanBindingVlanID 1.3.6.1.4.1.2011.5.12.8.1.2.10.1.1
Indicates the VLAN ID referenced. Range: 2-4093
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 2..4093  

hwPwCmdAcVlanBindingVcID 1.3.6.1.4.1.2011.5.12.8.1.2.10.1.2
Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element'. Range: 1-4294967295
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..4294967295  

hwPwCmdAcVlanBindingVcStatus 1.3.6.1.4.1.2011.5.12.8.1.2.10.1.3
Indicates the status of the PW: down(1), up(2), plugout(3).
Status: current Access: read-only
OBJECT-TYPE    
  VcStatusType  

hwPwCmdAcVlanBindingTemplateName 1.3.6.1.4.1.2011.5.12.8.1.2.10.1.4
Indicates the description string of the template, MUST be NULL string if not applicable or not known yet.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..19)  

hwPwCmdAcVlanBindingSignalProtocol 1.3.6.1.4.1.2011.5.12.8.1.2.10.1.5
Set by the operator to indicate the protocol responsible for establishing this PW. The value 'static' is used in all cases where no maintenance protocol (PW signaling) is used to set up the PW, i.e. require configuration of entries in the PW tables including PW labels, etc. The value 'ldp' is used in case of signaling with the Pwid FEC element with LDP signaling. The value 'rsvp' indicate the use of rsvp control protocol.
Status: current Access: read-create
OBJECT-TYPE    
  SignalProtocolType  

hwPwCmdAcVlanBindingOutboundLabel 1.3.6.1.4.1.2011.5.12.8.1.2.10.1.6
The PW label used in the outbound direction (i.e. toward the PSN). Range: 16-1048575 It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents the 20 bits of PW tag, for L2TP it represent the 32 bits Session ID. If the label is not yet known (signaling in process), the object should return a value of 0xFFFF.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 16..1048575  

hwPwCmdAcVlanBindingInboundLabel 1.3.6.1.4.1.2011.5.12.8.1.2.10.1.7
The PW label used in the inbound direction (i.e. packets received from the PSN. Range: 16-1048575 It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents the 20 bits of PW tag, for L2TP it represent the 32 bits Session ID. If the label is not yet known (signaling in process), the object should return a value of 0xFFFF.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 16..1048575  

hwPwCmdAcVlanBindingRowStatus 1.3.6.1.4.1.2011.5.12.8.1.2.10.1.8
For creating and modifying this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus 1..6  

hwPwCmdAcVlanBindingPrimOrSecondary 1.3.6.1.4.1.2011.5.12.8.1.2.10.1.9
This value indicate Primary PW or Secondary PW. Options: 1. primaryPW(1) -indicates primary PW 2. secondaryPW(2) -indicates secondary PW
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER primaryPW(1), secondaryPW(2)  

hwPwCmdAcPvpBindingTable 1.3.6.1.4.1.2011.5.12.8.1.2.11
This table specifies information for configuring and status monitoring for PW used in fixed network. The indexes of this table are ifIndex, hwPwCmdAcPvpBindingVpi and hwPwCmdAcPvpBindingPrimOrSecondary.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwPwCmdAcPvpBindingEntry

hwPwCmdAcPvpBindingEntry 1.3.6.1.4.1.2011.5.12.8.1.2.11.1
This table specifies information for configuring and status monitoring for PW used in fixed network. The indexes of this entry are ifIndex, hwPwCmdAcPvpBindingVpi and hwPwCmdAcPvpBindingPrimOrSecondary.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwPwCmdAcPvpBindingEntry  

hwPwCmdAcPvpBindingVpi 1.3.6.1.4.1.2011.5.12.8.1.2.11.1.1
Indicates the VPI value. Range: 0-4095
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4095  

hwPwCmdAcPvpBindingVcID 1.3.6.1.4.1.2011.5.12.8.1.2.11.1.2
Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element'. Range: 1-4294967295
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..4294967295  

hwPwCmdAcPvpBindingVcStatus 1.3.6.1.4.1.2011.5.12.8.1.2.11.1.3
Indicates the status of the PW: down(1), up(2), plugout(3).
Status: current Access: read-only
OBJECT-TYPE    
  VcStatusType  

hwPwCmdAcPvpBindingTemplateName 1.3.6.1.4.1.2011.5.12.8.1.2.11.1.4
Indicates the description string of the template, MUST be NULL string if not applicable or not known yet.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..19)  

hwPwCmdAcPvpBindingOutboundVpi 1.3.6.1.4.1.2011.5.12.8.1.2.11.1.5
Outbound VPI value of this ATM VC. Range: 0-4095
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..4095  

hwPwCmdAcPvpBindingSignalProtocol 1.3.6.1.4.1.2011.5.12.8.1.2.11.1.6
Set by the operator to indicate the protocol responsible for establishing this PW. The value 'static' is used in all cases where no maintenance protocol (PW signaling) is used to set up the PW, i.e. require configuration of entries in the PW tables including PW labels, etc. The value 'ldp' is used in case of signaling with the Pwid FEC element with LDP signaling. The value 'rsvp' indicate the use of rsvp control protocol.
Status: current Access: read-create
OBJECT-TYPE    
  SignalProtocolType  

hwPwCmdAcPvpBindingOutboundLabel 1.3.6.1.4.1.2011.5.12.8.1.2.11.1.7
The PW label used in the outbound direction (i.e. toward the PSN). Range: 16-1048575 It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents the 20 bits of PW tag, for L2TP it represent the 32 bits Session ID. If the label is not yet known (signaling in process), the object should return a value of 0xFFFF.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 16..1048575  

hwPwCmdAcPvpBindingInboundLabel 1.3.6.1.4.1.2011.5.12.8.1.2.11.1.8
The PW label used in the inbound direction (i.e. packets received from the PSN. Range: 16-1048575 It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents the 20 bits of PW tag, for L2TP it represent the 32 bits Session ID. If the label is not yet known (signaling in process), the object should return a value of 0xFFFF.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 16..1048575  

hwPwCmdAcPvpBindingPrimOrSecondary 1.3.6.1.4.1.2011.5.12.8.1.2.11.1.9
This value indicate Primary PW or Secondary PW. Options: 1. primaryPW(1) -indicates primary PW 2. secondaryPW(2) -indicates secondary PW
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER primaryPW(1), secondaryPW(2)  

hwPwCmdAcPvpBindingRowStatus 1.3.6.1.4.1.2011.5.12.8.1.2.11.1.10
For creating and modifying this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus 1..6  

hwPwCmdVccvTable 1.3.6.1.4.1.2011.5.12.8.1.2.12
This table specifies information for VCCV ping. The index of this table is hwPwCmdVccvVcID.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwPwCmdVccvEntry

hwPwCmdVccvEntry 1.3.6.1.4.1.2011.5.12.8.1.2.12.1
This table specifies information for VCCV ping. The index of this entry is hwPwCmdVccvVcID.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwPwCmdVccvEntry  

hwPwCmdVccvVcID 1.3.6.1.4.1.2011.5.12.8.1.2.12.1.1
This value indicate PW ID. Range: 1-4294967294
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..4294967294  

hwPwCmdVccvReplyMode 1.3.6.1.4.1.2011.5.12.8.1.2.12.1.2
The reply mode for the VCCV packet. Options: 1. doNotReply(1) -indicates that there is no reply for VCCV PING 2. replyViaAnIPv4IPv6UdpPacket(2) -indicates that reply for VCCV PING using IP UDP packets 3. replyViaAnIPv4IPv6UdpPacketWithRouterAlert(3) -indicates that reply for VCCV PING using IP UDP packets with router alert 4. replyViaApplicationLevelControlChannel(4) -indicates that reply for VCCV PING using control channel
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER doNotReply(1), replyViaAnIPv4IPv6UdpPacket(2), replyViaAnIPv4IPv6UdpPacketWithRouterAlert(3), replyViaApplicationLevelControlChannel(4)  

hwPwCmdVccvFrequency 1.3.6.1.4.1.2011.5.12.8.1.2.12.1.3
The frequency of VCCV packet. Options: 1. freq1000ms(1000) -indicates VCCV PING frequency, interval is 1000 ms 2. freq2000ms(2000) -indicates VCCV PING frequency, interval is 2000 ms 3. freq5000ms(5000) -indicates VCCV PING frequency, interval is 5000 ms 4. freq10000ms(10000) -indicates VCCV PING frequency, interval is 10000 ms
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER freq1000ms(1000), freq2000ms(2000), freq5000ms(5000), freq10000ms(10000)  

hwPwCmdVccvTimeoutLimit 1.3.6.1.4.1.2011.5.12.8.1.2.12.1.4
The timeout limit of VCCV ping. Range: 3-16
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 3..16  

hwPwCmdVccvRecoverLimit 1.3.6.1.4.1.2011.5.12.8.1.2.12.1.5
The recover limit of VCCV ping. Range: 1-16
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..16  

hwPwCmdVccvRemotePwVcID 1.3.6.1.4.1.2011.5.12.8.1.2.12.1.6
Indicates the PW Remote VcID in MH-PW. Range: 1-4294967295. When this leaf is set to 4294967295, it means that no remote PW ID is configured in the case of no creation, and that the configuration of remote PW ID is canceled in the case of modify operation.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4294967295  

hwPwCmdVccvRemoteIpAddress 1.3.6.1.4.1.2011.5.12.8.1.2.12.1.7
Indicates the PW Remote IP address in MH-PW.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwPwCmdVccvTtl 1.3.6.1.4.1.2011.5.12.8.1.2.12.1.8
Indicates the PW TTL value. Range: 0-255. When this leaf is set to 0, it means that no ttl value is configured in the case of no creation, and that the configuration of TTL value is canceled in the case of modify operation.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

hwPwCmdVccvPingStatus 1.3.6.1.4.1.2011.5.12.8.1.2.12.1.9
Indicates the VCCV ping status. Options: 1. normal(0) -indicates that VCCV PING can get reply from the peer and the PW connection is normal 2. break(1) -indicates that VCCV PING cannot reach the peer and the PW connection is break 3. inactive(2) -indicates that VCCV PING is not in work mode
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER normal(0), break(1), inactive(2)  

hwPwCmdVccvPingSuccessNum 1.3.6.1.4.1.2011.5.12.8.1.2.12.1.10
The number of VCCV ping succeed. Range: 0-4294967295
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwPwCmdVccvPingTimeOutNum 1.3.6.1.4.1.2011.5.12.8.1.2.12.1.11
The number of VCCV ping time out. Range: 0-4294967295
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwPwCmdVccvRowStatus 1.3.6.1.4.1.2011.5.12.8.1.2.12.1.12
For creating and modifying this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state. Options: 1. active(1) -indicates query operation 2. createAndGo(4) -indicates creating an auto VCCV PING configuration 3. destroy(6) -indicates deleting an auto VCCV PING configuration
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus 1..6  

hwPwCmdVccvPingPipeUniform 1.3.6.1.4.1.2011.5.12.8.1.2.12.1.13
For setting VCCV ping mode. Options: 1. pipe(1) -indicates pipe mode of the VCCV ping. 2. uniform(2) -indicates uniform mode of the VCCV ping. Default: pipe(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER pipe(1), uniform(2)  

hwPwCmdRecoverTable 1.3.6.1.4.1.2011.5.12.8.1.2.13
This table specifies information for recover mode of the PW. The index of this table is hwPwCmdRecoverVcID.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwPwCmdRecoverEntry

hwPwCmdRecoverEntry 1.3.6.1.4.1.2011.5.12.8.1.2.13.1
This table specifies information for recover mode of the PW. The index of this entry is hwPwCmdRecoverVcID.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwPwCmdRecoverEntry  

hwPwCmdRecoverVcID 1.3.6.1.4.1.2011.5.12.8.1.2.13.1.1
Indicates the PW ID. Range: 1-4294967294
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..4294967294  

hwPwCmdRecoverType 1.3.6.1.4.1.2011.5.12.8.1.2.13.1.2
Indicates the recover mode of the PW. Options: 1. revertive(1) -indicates that automatic recovery is allowed 2. nonRevertive(2) -indicates that the traffic will not be switched back to the working PW automatically
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER revertive(1), nonRevertive(2)  

hwPwCmdRecoverWtrtime 1.3.6.1.4.1.2011.5.12.8.1.2.13.1.3
Indicates the recover time. Range: 0,10-600 Unit: second
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 10..600  

hwPwCmdManualSwitchoverTable 1.3.6.1.4.1.2011.5.12.8.1.2.14
This table specifies information for manual switchover. The index of this table is hwPwCmdManualSwitchoverVcID.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwPwCmdManualSwitchoverEntry

hwPwCmdManualSwitchoverEntry 1.3.6.1.4.1.2011.5.12.8.1.2.14.1
This table specifies information for manual switchover. The index of this entry is hwPwCmdManualSwitchoverVcID.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwPwCmdManualSwitchoverEntry  

hwPwCmdManualSwitchoverVcID 1.3.6.1.4.1.2011.5.12.8.1.2.14.1.1
Indicates the primary PW ID. Range: 1-4294967294
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..4294967294  

hwPwCmdManualSwitchoverSwitchType 1.3.6.1.4.1.2011.5.12.8.1.2.14.1.2
Indicates the type of manual switchover. Options: 1. primaryPW(1) -indicates switch from primary PW to secondary PW 2. secondaryPW(2) -indicates switch from secondary PW to primary PW
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER primaryPW(1), secondaryPW(2)  

hwPwCmdSwitchoverIpAddrTable 1.3.6.1.4.1.2011.5.12.8.1.2.15
This table specifies information for local and remote IP address to switch over. The index of this table is hwPwCmdSwitchoverPwId.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwPwCmdSwitchoverIpAddrEntry

hwPwCmdSwitchoverIpAddrEntry 1.3.6.1.4.1.2011.5.12.8.1.2.15.1
This table specifies information for local and remote IP address to switch over. The index of this entry is hwPwCmdSwitchoverPwId.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwPwCmdSwitchoverIpAddrEntry  

hwPwCmdSwitchoverPwId 1.3.6.1.4.1.2011.5.12.8.1.2.15.1.1
Indicates the primary PW ID. Range: 1-4294967295
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..4294967295  

hwPwCmdSwitchoverLocalIpAddr 1.3.6.1.4.1.2011.5.12.8.1.2.15.1.2
Indicates switch over local IP address of PW.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

hwPwCmdSwitchoverRemoteIpAddr 1.3.6.1.4.1.2011.5.12.8.1.2.15.1.3
Indicates switch over remote IP address of PW.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

hwPwCmdSwitchoverRowStatus 1.3.6.1.4.1.2011.5.12.8.1.2.15.1.4
For creating and modifying this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus 1..6  

hwPwCmdPsStatusTable 1.3.6.1.4.1.2011.5.12.8.1.2.16
This table specifies information for status of PW protect group. The index of this table is hwPwCmdPsPwId.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwPwCmdPsStatusEntry

hwPwCmdPsStatusEntry 1.3.6.1.4.1.2011.5.12.8.1.2.16.1
This table specifies information for status of PW protect group. The index of this entry is hwPwCmdPsPwId.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwPwCmdPsStatusEntry  

hwPwCmdPsPwId 1.3.6.1.4.1.2011.5.12.8.1.2.16.1.1
Indicates the primary PW ID. Range: 1-4294967294
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..4294967294  

hwPwCmdPsPrimaryPwStatus 1.3.6.1.4.1.2011.5.12.8.1.2.16.1.2
Indicates status of primary PW. Options: 1. down(1) -indicates that the primary member of the PW protect group is down 2. upActive(2) -indicates that the primary member of the PW protect group is up and active 3. upStandby(3) -indicates that the primary member of the PW protect group is up and standby
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER down(1), upActive(2), upStandby(3)  

hwPwCmdPsSecondaryPwStatus 1.3.6.1.4.1.2011.5.12.8.1.2.16.1.3
Indicates status of secondary PW. Options: 1. down(1) -indicates that the secondary member of the PW protect group is down 2. upActive(2) -indicates that the secondary member of the PW protect group is up and active 3. upStandby(3) -indicates that the secondary member of the PW protect group is up and standby
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER down(1), upActive(2), upStandby(3)  

hwPwCmdPvcExpMapTable 1.3.6.1.4.1.2011.5.12.8.1.2.17
This table specifies information for PVC-EXP mapping. The indexes of this table are ifIndex, hwPwCmdPvcExpMapVpi, hwPwCmdPvcExpMapVci.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwPwCmdPvcExpMapEntry

hwPwCmdPvcExpMapEntry 1.3.6.1.4.1.2011.5.12.8.1.2.17.1
This table specifies information for PVC-EXP mapping. The indexes of this entry are ifIndex, hwPwCmdPvcExpMapVpi, hwPwCmdPvcExpMapVci.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwPwCmdPvcExpMapEntry  

hwPwCmdPvcExpMapVpi 1.3.6.1.4.1.2011.5.12.8.1.2.17.1.1
Indicates the VPI value. Range: 0-4095
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4095  

hwPwCmdPvcExpMapVci 1.3.6.1.4.1.2011.5.12.8.1.2.17.1.2
Indicates the VCI value. Range: 32-65535
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 32..65535  

hwPwCmdPvcExpMapExp 1.3.6.1.4.1.2011.5.12.8.1.2.17.1.3
Indicates the EXP value. Range: 0-7
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..7  

hwPwCmdPvcExpMapRowStatus 1.3.6.1.4.1.2011.5.12.8.1.2.17.1.4
For creating and modifying this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state. Options: 1. active(1) -indicates query operation 2. createAndGo(4) -indicates creating a mapping from PVC to MPLS EXP 3. destroy(6) -indicates deleting a mapping from PVC to MPLS EXP
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus 1..6  

hwPwCmdExpCosMapTable 1.3.6.1.4.1.2011.5.12.8.1.2.18
This table specifies information for EXP-COS mapping. The index of this table is hwPwCmdExpCosMapExp.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwPwCmdExpCosMapEntry

hwPwCmdExpCosMapEntry 1.3.6.1.4.1.2011.5.12.8.1.2.18.1
This table specifies information for EXP-COS mapping. The index of this entry is hwPwCmdExpCosMapExp.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwPwCmdExpCosMapEntry  

hwPwCmdExpCosMapExp 1.3.6.1.4.1.2011.5.12.8.1.2.18.1.1
Indicates the EXP value. Range: 0-7
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..7  

hwPwCmdExpCosMapCos 1.3.6.1.4.1.2011.5.12.8.1.2.18.1.2
Indicates the COS value. Range: 0-7
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..7  

hwPwCmdTdmExpMapTable 1.3.6.1.4.1.2011.5.12.8.1.2.19
This table specifies information for TDM-EXP mapping. The index of this table is hwPwCmdTdmConnectId.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwPwCmdTdmExpMapEntry

hwPwCmdTdmExpMapEntry 1.3.6.1.4.1.2011.5.12.8.1.2.19.1
This table specifies information for TDM-EXP mapping. The index of this entry is hwPwCmdTdmConnectId.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwPwCmdTdmExpMapEntry  

hwPwCmdTdmConnectId 1.3.6.1.4.1.2011.5.12.8.1.2.19.1.1
Indicates the TDM connect ID. Range: 0-2047
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..2047  

hwPwCmdTdmExpMapExp 1.3.6.1.4.1.2011.5.12.8.1.2.19.1.2
Indicates the EXP value. Range: 0-7 Default: 0
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7  

hwPwCmdTdmExpMapRowStatus 1.3.6.1.4.1.2011.5.12.8.1.2.19.1.3
For creating and modifying this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state. Options: 1. active(1) -indicates query operation 2. createAndGo(4) -indicates creating a mapping from TDM to MPLS EXP 3. destroy(6) -indicates deleting a mapping from TDM to MPLS EXP
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus 1..6  

hwPwCmdAcTdmBindingTable 1.3.6.1.4.1.2011.5.12.8.1.2.20
This table specifies information for configuring and status monitoring for PW used in fixed network. The indexes of this table are hwPwCmdAcTdmBindingTdmConnectId and hwPwCmdAcTdmBindingPrimOrSecondary.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwPwCmdAcTdmBindingEntry

hwPwCmdAcTdmBindingEntry 1.3.6.1.4.1.2011.5.12.8.1.2.20.1
This table specifies information for configuring and status monitoring for PW used in fixed network. The indexes of this entry are hwPwCmdAcTdmBindingTdmConnectId and hwPwCmdAcTdmBindingPrimOrSecondary.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwPwCmdAcTdmBindingEntry  

hwPwCmdAcTdmBindingTdmConnectId 1.3.6.1.4.1.2011.5.12.8.1.2.20.1.1
Indicates the connect index referenced. Range: 0-1023
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..1023  

hwPwCmdAcTdmBindingVcID 1.3.6.1.4.1.2011.5.12.8.1.2.20.1.2
Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element'. Range: 1-4294967294
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4294967294  

hwPwCmdAcTdmBindingVcStatus 1.3.6.1.4.1.2011.5.12.8.1.2.20.1.3
Indicates the status of the PW: down(1), up(2), plugout(3).
Status: current Access: read-write
OBJECT-TYPE    
  VcStatusType  

hwPwCmdAcTdmBindingTemplateName 1.3.6.1.4.1.2011.5.12.8.1.2.20.1.4
Indicates the description string of the template, MUST be NULL string if not applicable or not known yet.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..19)  

hwPwCmdAcTdmBindingEncapUDPPort 1.3.6.1.4.1.2011.5.12.8.1.2.20.1.5
Indicates UDP protocol encapsulation, UDP destination port. Range: 50000-57300
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 50000..57300  

hwPwCmdAcTdmBindingSignalProtocol 1.3.6.1.4.1.2011.5.12.8.1.2.20.1.6
Set by the operator to indicate the protocol responsible for establishing this PW. The value 'static' is used in all cases where no maintenance protocol (PW signaling) is used to set up the PW, i.e. require configuration of entries in the PW tables including PW labels, etc. The value 'ldp' is used in case of signaling with the Pwid FEC element with LDP signaling. The value 'rsvp' indicate the use of rsvp control protocol.
Status: current Access: read-write
OBJECT-TYPE    
  SignalProtocolType  

hwPwCmdAcTdmBindingOutboundLabel 1.3.6.1.4.1.2011.5.12.8.1.2.20.1.7
The PW label used in the outbound direction (i.e. toward the PSN). Range: 16-1048575 It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents the 20 bits of PW tag, for L2TP it represent the 32 bits Session ID. If the label is not yet known (signaling in process), the object should return a value of 0xFFFF.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 16..1048575  

hwPwCmdAcTdmBindingInboundLabel 1.3.6.1.4.1.2011.5.12.8.1.2.20.1.8
The PW label used in the inbound direction (i.e. packets received from the PSN. Range: 16-1048575 It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents the 20 bits of PW tag, for L2TP it represent the 32 bits Session ID. If the label is not yet known (signaling in process), the object should return a value of 0xFFFF.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 16..1048575  

hwPwCmdAcTdmBindingPrimOrSecondary 1.3.6.1.4.1.2011.5.12.8.1.2.20.1.9
This value indicate Primary PW or Secondary PW. Options: 1. primaryPW(1) -indicates primary PW 2. secondaryPW(2) -indicates secondary PW
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER primaryPW(1), secondaryPW(2)  

hwPwCmdAcTdmBindingRowStatus 1.3.6.1.4.1.2011.5.12.8.1.2.20.1.10
For creating and modifying this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus 1..6  

hwPwCmdPwTable 1.3.6.1.4.1.2011.5.12.8.1.2.21
This table specifies information for configuring and status monitoring for PW used in fixed network. The index of this table is hwPwCmdPwID.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwPwCmdPwEntry

hwPwCmdPwEntry 1.3.6.1.4.1.2011.5.12.8.1.2.21.1
This table specifies information for configuring and status monitoring for PW used in fixed network. The index of this entry is hwPwCmdPwID.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwPwCmdPwEntry  

hwPwCmdPwID 1.3.6.1.4.1.2011.5.12.8.1.2.21.1.1
Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element'. Range: 1-4294967294
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4294967294  

hwPwCmdPwTemplateName 1.3.6.1.4.1.2011.5.12.8.1.2.21.1.2
Indicates the description string of the template, MUST be NULL string if not applicable or not known yet.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..19)  

hwPwCmdPwAcBindMode 1.3.6.1.4.1.2011.5.12.8.1.2.21.1.3
AcType. Options: 1. vlan(1) -indicates vlan 2. tdm(2) -indicates tdm 3. pvcfsp(3) -indicates pvc fsp 4. pvpfsp(4) -indicates pvp fsp
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER vlan(1), tdm(2), pvcfsp(3), pvpfsp(4)  

hwPwCmdPwVlanID 1.3.6.1.4.1.2011.5.12.8.1.2.21.1.4
Indicates the VLAN ID referenced. Range: 2-4093
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 2..4093  

hwPwCmdPwTdmVclID 1.3.6.1.4.1.2011.5.12.8.1.2.21.1.5
Indicates the connect index referenced. Range: 0-2047, 4294967295
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..2047 | 4294967295  

hwPwCmdPwIfindex 1.3.6.1.4.1.2011.5.12.8.1.2.21.1.6
Index of the interface (or the virtual interface) associated with the PW. Range: 1-2147483647, -1
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1 | 1..2147483647  

hwPwCmdPwVci 1.3.6.1.4.1.2011.5.12.8.1.2.21.1.7
Indicates the VPI value. Range: 32-65535, -1
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1 | 32..65535  

hwPwCmdPwVpi 1.3.6.1.4.1.2011.5.12.8.1.2.21.1.8
Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element'. Range: 0-4095, -1
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1 | 0..4095  

hwPwCmdPwOutboundVci 1.3.6.1.4.1.2011.5.12.8.1.2.21.1.9
VCI value of this ATM VC. Range: 32-65535, -1 If the pwVcType is atmNto1Transparent, atmCell1to1Vpc or atmCellNto1Vpc then the value should be set to zero.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1 | 32..65535  

hwPwCmdPwOutboundVpi 1.3.6.1.4.1.2011.5.12.8.1.2.21.1.10
VPI value of this ATM VC. Range: 0-4095, -1 If the pwVcType is atmNto1Transparent then the value will be set to zero.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1 | 0..4095  

hwPwCmdPwImaGroup 1.3.6.1.4.1.2011.5.12.8.1.2.21.1.11
Indicates the VLAN ID referenced. Range: 0-4294967294
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..4294967294  

hwPwCmdPwVcStatus 1.3.6.1.4.1.2011.5.12.8.1.2.21.1.12
Indicates the status of the PW: down(1), up(2), plugout(3).
Status: current Access: read-only
OBJECT-TYPE    
  VcStatusType  

hwPwCmdPwEncapSrcUDPPort 1.3.6.1.4.1.2011.5.12.8.1.2.21.1.13
Indicates UDP protocol encapsulation, UDP destination port. Range: 50000-57300, -1
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1 | 50000..57300  

hwPwCmdPwEncapDstUDPPort 1.3.6.1.4.1.2011.5.12.8.1.2.21.1.14
Indicates UDP protocol encapsulation, UDP destination port. Range: 49152-65535, -1
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1 | 49152..65535  

hwPwCmdPwSignalProtocol 1.3.6.1.4.1.2011.5.12.8.1.2.21.1.15
Set by the operator to indicate the protocol responsible for establishing this PW. The value 'static' is used in all cases where no maintenance protocol (PW signaling) is used to set up the PW, i.e. require configuration of entries in the PW tables including PW labels, etc. The value 'ldp' is used in case of signaling with the Pwid FEC element with LDP signaling. The value 'rsvp' indicate the use of rsvp control protocol.
Status: current Access: read-create
OBJECT-TYPE    
  SignalProtocolType  

hwPwCmdPwOutboundLabel 1.3.6.1.4.1.2011.5.12.8.1.2.21.1.16
The PW label used in the outbound direction (i.e. toward the PSN). Range: 16-1048575, -1 It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents the 20 bits of PW tag, for L2TP it represent the 32 bits Session ID. If the label is not yet known (signaling in process), the object should return a value of 0xFFFF.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1 | 16..1048575  

hwPwCmdPwInboundLabel 1.3.6.1.4.1.2011.5.12.8.1.2.21.1.17
The PW label used in the inbound direction (i.e. packets received from the PSN. Range: 16-1048575 It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents the 20 bits of PW tag, for L2TP it represent the 32 bits Session ID. If the label is not yet known (signaling in process), the object should return a value of 0xFFFF.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 16..1048575  

hwPwCmdPwPriority 1.3.6.1.4.1.2011.5.12.8.1.2.21.1.18
This value indicate Primary PW or Secondary PW. Options: 1. primaryPW(1) -indicates primary PW 2. secondaryPW(2) -indicates secondary PW
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER primaryPW(1), secondaryPW(2)  

hwPwCmdPwRowStatus 1.3.6.1.4.1.2011.5.12.8.1.2.21.1.19
For creating and modifying this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus 1..6  

hwPwCmdPwDesc 1.3.6.1.4.1.2011.5.12.8.1.2.21.1.20
PW description, used to describe extra information of PW.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

hwPwCmdPwReceiveDstUDPPort 1.3.6.1.4.1.2011.5.12.8.1.2.21.1.21
Indicates UDP protocol encapsulation, UDP source port. Range: 50048-50111, -1
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1 | 50048..50111  

hwPwCmdPwMultiPvc 1.3.6.1.4.1.2011.5.12.8.1.2.21.1.22
Multi VCCs or VPCs string, include vpi,vci,outvpi and outvci.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..800)  

hwPwCmdPwMultiPvcOp 1.3.6.1.4.1.2011.5.12.8.1.2.21.1.23
Multi VCCs or VPCs operate code, add or delete. Options: 1. add(1) -indicates add operation 2. delete(2) -indicates delete operation 3. invalidValue(-1) -indicates invalid value
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER add(1), delete(2), invalidValue(-1)  

hwPwCmdPwCarTable 1.3.6.1.4.1.2011.5.12.8.1.2.22
This table specifies information for PW CAR. The index of this table is hwPwCmdPWCarVcID.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwPwCmdPwCarEntry

hwPwCmdPwCarEntry 1.3.6.1.4.1.2011.5.12.8.1.2.22.1
This table specifies information for PW CAR. The index of this entry is hwPwCmdPWCarVcID.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwPwCmdPwCarEntry  

hwPwCmdPWCarVcID 1.3.6.1.4.1.2011.5.12.8.1.2.22.1.1
Indicates the PW ID. Range: 1-4294967294
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..4294967294  

hwPwCmdPWCarRowStatus 1.3.6.1.4.1.2011.5.12.8.1.2.22.1.4
For creating and modifying this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state. Options: 1. active(1) -indicates query operation 2. createAndGo(4) -indicates creating committed access rate parameters of a PW 3. destroy(6) -indicates deleting committed access rate parameters of a PW
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus 1..6  

hwPwCmdPWCarCir 1.3.6.1.4.1.2011.5.12.8.1.2.22.1.5
Committed information rate, it is the necessary parameter for adding pw car. Range: 1-1048575 Unit: 64Kbit/s
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..1048575  

hwPwCmdPWCarCbs 1.3.6.1.4.1.2011.5.12.8.1.2.22.1.6
Committed burst size, default value is ((cir+8191)/8192+1). Range: 1-32767 Unit: 2KByte/s
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..32767  

hwPwCmdPWCarPir 1.3.6.1.4.1.2011.5.12.8.1.2.22.1.7
Peak information rate, default value is double of committed information rate. Range: 1-1048575 Unit: 64Kbit/s
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..1048575  

hwPwCmdPWCarPbs 1.3.6.1.4.1.2011.5.12.8.1.2.22.1.8
Peak burst size, default value is MAX(((pir+8191)/8192 + 1), cbs). Range: 1-32767 Unit: 2KByte/s
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..32767  

hwPwCmdPvpExpMapTable 1.3.6.1.4.1.2011.5.12.8.1.2.23
This table specifies information for PVP-EXP mapping. The indexes of this table are ifIndex and hwPwCmdPvpExpMapVpi.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwPwCmdPvpExpMapEntry

hwPwCmdPvpExpMapEntry 1.3.6.1.4.1.2011.5.12.8.1.2.23.1
This table specifies information for PVP-EXP mapping. The indexes of this entry are ifIndex and hwPwCmdPvpExpMapVpi.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwPwCmdPvpExpMapEntry  

hwPwCmdPvpExpMapVpi 1.3.6.1.4.1.2011.5.12.8.1.2.23.1.1
Indicates the VPI value. Range: 0-4095
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4095  

hwPwCmdPvpExpMapExp 1.3.6.1.4.1.2011.5.12.8.1.2.23.1.2
Indicates the EXP value. Range: 0-7
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..7  

hwPwCmdPvpExpMapRowStatus 1.3.6.1.4.1.2011.5.12.8.1.2.23.1.3
For creating and modifying this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state. Options: 1. active(1) -indicates query operation 2. createAndGo(4) -indicates creating a mapping from PVP to MPLS EXP 3. destroy(6) -indicates deleting a mapping from PVP to MPLS EXP
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus 1..6  

hwMplsEcmpEnable 1.3.6.1.4.1.2011.5.12.8.1.2.24
Used to enable or disable the ECMP function. Options: 1. enable(1) -indicates that the ECMP function is enabled 2. disable(2) -indicates that the ECMP function is disabled Default: disable(2)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwMplsL2VPNEnable 1.3.6.1.4.1.2011.5.12.8.1.2.25
Used to enable or disable the MPLS L2VPN function. Options: 1. enable(1) -indicates that the MPLS L2VPN function is enabled 2. disable(2) -indicates that the MPLS L2VPN function is disabled Default: disable(2)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwPwExtTable 1.3.6.1.4.1.2011.5.12.8.1.2.26
This table specifies the extend information for configuring and status monitoring that are common to all service types and PSN types. The index of this table is pwIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwPwExtEntry

hwPwExtEntry 1.3.6.1.4.1.2011.5.12.8.1.2.26.1
This table specifies the extend information for configuring and status monitoring that are common to all service types and PSN types. The index of this entry is pwIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwPwExtEntry  

hwPwPriority 1.3.6.1.4.1.2011.5.12.8.1.2.26.1.1
This value indicate Primary PW or Secondary PW. Options: 1. primaryPW(1) -indicates the primary member of the PW protect group 2. secondaryPW(2) -indicates the secondary member of the PW protect group
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER primaryPW(1), secondaryPW(2)  

hwPwPrimaryPwIndex 1.3.6.1.4.1.2011.5.12.8.1.2.26.1.2
The value that represents the corresponding primary PW in the pwTable.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hwPwVCCVCapabilities 1.3.6.1.4.1.2011.5.12.8.1.2.26.1.3
Config the optional VCCV capabilities of the PW.
Status: current Access: read-write
OBJECT-TYPE    
  BITS ccCw(0), ccAlert(1), ccTTL(2), cvIcmpping(3), cvLspping(4), cvBfd(5)  

hwPwVCCVStatus 1.3.6.1.4.1.2011.5.12.8.1.2.26.1.4
Indicates the optional VCCV capabilities of the PW.
Status: current Access: read-only
OBJECT-TYPE    
  BITS ccCw(0), ccAlert(1), ccTTL(2), cvIcmpping(3), cvLspping(4), cvBfd(5)  

hwPwFlowLabel 1.3.6.1.4.1.2011.5.12.8.1.2.26.1.5
Indicates the optional flow label capabilities of the PW.
Status: current Access: read-write
OBJECT-TYPE    
  BITS sip(0), dip(1), smac(2), dmac(3)  

hwPwAtmCfgTimeout 1.3.6.1.4.1.2011.5.12.8.1.2.26.1.6
Indicates max ATM cells encapsulation delay time. Range: 0-50 Default: 0 Unit: millisecond
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..50  

hwPwPriMappingProfName 1.3.6.1.4.1.2011.5.12.8.1.2.26.1.7
QoS priority mapping profile name for PW, a string of 1-32 characters. There are all together 92 valid characters for the name. These characters include the following: uppercase and lowercase English letters (52 characters), numerals (0-9), and 30 symbols: ! # $ % & ' ( ) * + , - . / : ; < = > @ [ \ ] ^ _ ` | ~~.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

hwPwFlowLabelCapabilities 1.3.6.1.4.1.2011.5.12.8.1.2.26.1.8
Indicates the PW flow label capability.
Status: current Access: read-write
OBJECT-TYPE    
  BITS receive(0), transmit(1)  

hwPwFlowlabelStatus 1.3.6.1.4.1.2011.5.12.8.1.2.26.1.9
Indicates the negotiation result of the PW flow label capability. The negotiation result of static PW is consistent with local configuration.
Status: current Access: read-only
OBJECT-TYPE    
  BITS receive(0), transmit(1)  

hwPwStatisticSwitch 1.3.6.1.4.1.2011.5.12.8.1.2.26.1.10
Used to enable or disable the traffic statistic function of pw. Options: 1. enable(1) -indicates that the traffic statistic function is enabled 2. disable(2) -indicates that the traffic statistic function is disabled Default: disable(2)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwPwTnlPolicy 1.3.6.1.4.1.2011.5.12.8.1.2.26.1.11
Used to configure the tunnel policy used by the PW.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..39)  

hwPwCmdTdmDefectStatsTable 1.3.6.1.4.1.2011.5.12.8.1.2.27
This table is a read-only table. The purpose of this table is to keep statistical information about the TDM failure alarm. The index of this table is pwIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwPwCmdTdmDefectStatsEntry

hwPwCmdTdmDefectStatsEntry 1.3.6.1.4.1.2011.5.12.8.1.2.27.1
This table is a read-only table. The purpose of this table is to keep statistical information about the TDM failure alarm. The index of this entry is pwIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwPwCmdTdmDefectStatsEntry  

hwPwCmdTdmDefectStatsJtrBfrOverRun 1.3.6.1.4.1.2011.5.12.8.1.2.27.1.1
Indicates the number of times that the jitter buffer overrun.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwPwCmdTdmDefectStatsJtrBfrOverRunClear 1.3.6.1.4.1.2011.5.12.8.1.2.27.1.2
Indicates the number of times that the system is restored from overrun of the jitter buffer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwPwCmdTdmDefectStatsJtrBfrUnderRun 1.3.6.1.4.1.2011.5.12.8.1.2.27.1.3
Indicates the number of times that the jitter buffer overrun.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwPwCmdTdmDefectStatsJtrBfrUnderRunClear 1.3.6.1.4.1.2011.5.12.8.1.2.27.1.4
Indicates the number of times that the system is restored from underrun of the jitter buffer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwPwCmdTdmDefectStatsR1 1.3.6.1.4.1.2011.5.12.8.1.2.27.1.5
Indicates the number of times that the PSN side receives an alarm triggered by R = 1. When the peer end didn't receive for failure. For example, jitter buffer underrun, Then the local end receives an packet with R = 1.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwPwCmdTdmDefectStatsR1Clear 1.3.6.1.4.1.2011.5.12.8.1.2.27.1.6
Indicates the number of times that the system is restored from R1.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwPwCmdTdmDefectStatsLM010 1.3.6.1.4.1.2011.5.12.8.1.2.27.1.7
Indicates the number of times that the PSN side receives an alarm triggered by M = 1. Only for the CESOPSN, When the local end receives a RDI alarm from the AC side, the local end sets the control flag M to 1. Then, the peer end receives an LM(010) packet.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwPwCmdTdmDefectStatsLM010Clear 1.3.6.1.4.1.2011.5.12.8.1.2.27.1.8
Indicates the number of times that the system is restored from LM(010) to LM(000).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwPwCmdTdmDefectStatsLM100 1.3.6.1.4.1.2011.5.12.8.1.2.27.1.9
Indicates the number of times that the PSN side receives an alarm triggered by L = 1. When the local end receives a LOS, LOF, AIS, or LMFA alarm from the AC side, the local end sets the control flag L to 1. Then, the peer end receives an LM(100) packet.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwPwCmdTdmDefectStatsLM100Clear 1.3.6.1.4.1.2011.5.12.8.1.2.27.1.10
Indicates the number of times that the system is restored from LM(100) to LM(000).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwPwPriMappingTable 1.3.6.1.4.1.2011.5.12.8.1.2.28
MPLS priority mapping profile table for PW. The purpose of this table is to set and query MPLS priority mapping profile. The index of this table is hwPwPriMappingProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwPwPriMappingEntry

hwPwPriMappingEntry 1.3.6.1.4.1.2011.5.12.8.1.2.28.1
MPLS priority mapping profile table for PW. The purpose of this table is to set and query MPLS priority mapping profile. The index of this entry is hwPwPriMappingProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwPwPriMappingEntry  

hwPwPriMappingProfileName 1.3.6.1.4.1.2011.5.12.8.1.2.28.1.1
QoS priority mapping profile name for PW, a string of 1-32 characters. There are all together 92 valid characters for the name. These characters include the following: uppercase and lowercase English letters (52 characters), numerals (0-9), and 30 symbols: ! # $ % & ' ( ) * + , - . / : ; < = > @ [ \ ] ^ _ ` | ~~.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

hwPwInboundInputPriList 1.3.6.1.4.1.2011.5.12.8.1.2.28.1.2
Inbound input priority list(MPLS PW label EXP) of QoS priority mapping. Legal character include: 0-7,hyphen,comma. Example legal string: 0,2,4-7.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..15)  

hwPwInboundOutputPriList 1.3.6.1.4.1.2011.5.12.8.1.2.28.1.3
Inbound output priority list(ethernet VLAN tag 802.1p) of QoS priority mapping. Legal character include: 0-7,hyphen,comma. Example legal string: 0,2,4-7.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..15)  

hwPwOutboundInputPriList 1.3.6.1.4.1.2011.5.12.8.1.2.28.1.4
Outbound input priority list(ethernet VLAN tag 802.1p) of QoS priority mapping. Legal character include: 0-7,hyphen,comma. Example legal string: 0,2,4-7.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..15)  

hwPwOutboundOutputPriList 1.3.6.1.4.1.2011.5.12.8.1.2.28.1.5
Outbound output priority list(MPLS PW label EXP) of QoS priority mapping. Legal character include: 0-7,hyphen,comma. Example legal string: 0,2,4-7.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..15)  

hwPwPriMappingProfileRowStatus 1.3.6.1.4.1.2011.5.12.8.1.2.28.1.6
For creating and modifying this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state. Options: 1. active(1) -indicates query operation 2. createAndGo(4) -indicates creating committed 3. destroy(6) -indicates deleting committed
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus 1..6  

hwPwCmdStatisticTable 1.3.6.1.4.1.2011.5.12.8.1.2.29
This table is used to query or clear the traffic statistic info of PW. The index of this table is pwIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwPwCmdStatisticEntry

hwPwCmdStatisticEntry 1.3.6.1.4.1.2011.5.12.8.1.2.29.1
This table is used to query or clear the traffic statistic info of PW. The index of this entry is pwIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwPwCmdStatisticEntry  

hwPwCmdStatisticUpstreamOctectsP0 1.3.6.1.4.1.2011.5.12.8.1.2.29.1.1
The total number of upstream octets with priority equel to 0.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwPwCmdStatisticUpstreamPacketsP0 1.3.6.1.4.1.2011.5.12.8.1.2.29.1.2
The total number of upstream packets with priority equel to 0.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwPwCmdStatisticUpstreamOctectsP1 1.3.6.1.4.1.2011.5.12.8.1.2.29.1.3
The total number of upstream octets with priority equel to 1.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwPwCmdStatisticUpstreamPacketsP1 1.3.6.1.4.1.2011.5.12.8.1.2.29.1.4
The total number of upstream packets with priority equel to 1.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwPwCmdStatisticUpstreamOctectsP2 1.3.6.1.4.1.2011.5.12.8.1.2.29.1.5
The total number of upstream octets with priority equel to 2.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwPwCmdStatisticUpstreamPacketsP2 1.3.6.1.4.1.2011.5.12.8.1.2.29.1.6
The total number of upstream packets with priority equel to 2.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwPwCmdStatisticUpstreamOctectsP3 1.3.6.1.4.1.2011.5.12.8.1.2.29.1.7
The total number of upstream octets with priority equel to 3.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwPwCmdStatisticUpstreamPacketsP3 1.3.6.1.4.1.2011.5.12.8.1.2.29.1.8
The total number of upstream packets with priority equel to 3.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwPwCmdStatisticUpstreamOctectsP4 1.3.6.1.4.1.2011.5.12.8.1.2.29.1.9
The total number of upstream octets with priority equel to 4.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwPwCmdStatisticUpstreamPacketsP4 1.3.6.1.4.1.2011.5.12.8.1.2.29.1.10
The total number of upstream packets with priority equel to 4.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwPwCmdStatisticUpstreamOctectsP5 1.3.6.1.4.1.2011.5.12.8.1.2.29.1.11
The total number of upstream octets with priority equel to 5.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwPwCmdStatisticUpstreamPacketsP5 1.3.6.1.4.1.2011.5.12.8.1.2.29.1.12
The total number of upstream packets with priority equel to 5.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwPwCmdStatisticUpstreamOctectsP6 1.3.6.1.4.1.2011.5.12.8.1.2.29.1.13
The total number of upstream octets with priority equel to 6.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwPwCmdStatisticUpstreamPacketsP6 1.3.6.1.4.1.2011.5.12.8.1.2.29.1.14
The total number of upstream packets with priority equel to 6.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwPwCmdStatisticUpstreamOctectsP7 1.3.6.1.4.1.2011.5.12.8.1.2.29.1.15
The total number of upstream octets with priority equel to 7.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwPwCmdStatisticUpstreamPacketsP7 1.3.6.1.4.1.2011.5.12.8.1.2.29.1.16
The total number of upstream packets with priority equel to 7.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwPwCmdStatisticDownstreamOctectsP0 1.3.6.1.4.1.2011.5.12.8.1.2.29.1.17
The total number of downstream octets with priority equel to 0.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwPwCmdStatisticDownstreamPacketsP0 1.3.6.1.4.1.2011.5.12.8.1.2.29.1.18
The total number of downstream packets with priority equel to 0.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwPwCmdStatisticDownstreamOctectsP1 1.3.6.1.4.1.2011.5.12.8.1.2.29.1.19
The total number of downstream octets with priority equel to 1.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwPwCmdStatisticDownstreamPacketsP1 1.3.6.1.4.1.2011.5.12.8.1.2.29.1.20
The total number of downstream packets with priority equel to 1.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwPwCmdStatisticDownstreamOctectsP2 1.3.6.1.4.1.2011.5.12.8.1.2.29.1.21
The total number of downstream octets with priority equel to 2.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwPwCmdStatisticDownstreamPacketsP2 1.3.6.1.4.1.2011.5.12.8.1.2.29.1.22
The total number of downstream packets with priority equel to 2.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwPwCmdStatisticDownstreamOctectsP3 1.3.6.1.4.1.2011.5.12.8.1.2.29.1.23
The total number of downstream octets with priority equel to 3.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwPwCmdStatisticDownstreamPacketsP3 1.3.6.1.4.1.2011.5.12.8.1.2.29.1.24
The total number of downstream packets with priority equel to 3.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwPwCmdStatisticDownstreamOctectsP4 1.3.6.1.4.1.2011.5.12.8.1.2.29.1.25
The total number of downstream octets with priority equel to 4.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwPwCmdStatisticDownstreamPacketsP4 1.3.6.1.4.1.2011.5.12.8.1.2.29.1.26
The total number of downstream packets with priority equel to 4.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwPwCmdStatisticDownstreamOctectsP5 1.3.6.1.4.1.2011.5.12.8.1.2.29.1.27
The total number of downstream octets with priority equel to 5.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwPwCmdStatisticDownstreamPacketsP5 1.3.6.1.4.1.2011.5.12.8.1.2.29.1.28
The total number of downstream packets with priority equel to 5.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwPwCmdStatisticDownstreamOctectsP6 1.3.6.1.4.1.2011.5.12.8.1.2.29.1.29
The total number of downstream octets with priority equel to 6.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwPwCmdStatisticDownstreamPacketsP6 1.3.6.1.4.1.2011.5.12.8.1.2.29.1.30
The total number of downstream packets with priority equel to 6.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwPwCmdStatisticDownstreamOctectsP7 1.3.6.1.4.1.2011.5.12.8.1.2.29.1.31
The total number of downstream octets with priority equel to 7.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwPwCmdStatisticDownstreamPacketsP7 1.3.6.1.4.1.2011.5.12.8.1.2.29.1.32
The total number of downstream packets with priority equel to 7.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwPwCmdStatisticClear 1.3.6.1.4.1.2011.5.12.8.1.2.29.1.33
Clear the traffic statistics of this pw. Options: 1. clear(1) -clear the traffic statistics of this pw
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(1)  

hwPwStatisticClearAll 1.3.6.1.4.1.2011.5.12.8.1.2.30
Clear the traffic statistics of all PWs. Options: 1. clear(1) -clear the traffic statistics of all PWs
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(1)  

hwPwRedundancyTable 1.3.6.1.4.1.2011.5.12.8.1.2.31
This table specifies information for pw redundancy. The index of this table is pwIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwPwRedundancyEntry

hwPwRedundancyEntry 1.3.6.1.4.1.2011.5.12.8.1.2.31.1
This table specifies information for pw redundancy. The index of this entry is pwIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwPwRedundancyEntry  

hwPwRedundancyMode 1.3.6.1.4.1.2011.5.12.8.1.2.31.1.1
Indicates the mode of the pw redundancy. Options: 1. master(1) -indicates that the pw redundancy mode is master 2. independent(2) -indicates that the pw redundancy mode is independent Default: master(1)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER master(1), independent(2)  

hwPwStreamDualReceiving 1.3.6.1.4.1.2011.5.12.8.1.2.31.1.2
Indicates the stream receiving mode of the pw redundancy. Options: 1. enable(1) -indicates that the stream receiving mode of the pw redundancy is dual 2. disable(2) -indicates that the stream receiving mode of the pw redundancy is single Default: disable(2)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwPwCmdPwCarExtTable 1.3.6.1.4.1.2011.5.12.8.1.2.32
This table specifies information for PW CAR. The index of this table is pwIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwPwCmdPwCarExtEntry

hwPwCmdPwCarExtEntry 1.3.6.1.4.1.2011.5.12.8.1.2.32.1
This table specifies information for PW CAR. The index of this entry is pwIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwPwCmdPwCarExtEntry  

hwPwCmdPwCarExtCir 1.3.6.1.4.1.2011.5.12.8.1.2.32.1.1
Committed information rate, it is the necessary parameter for adding pw car. Range: 1-1048575 Unit: 64Kbit/s
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..1048575  

hwPwCmdPwCarExtCbs 1.3.6.1.4.1.2011.5.12.8.1.2.32.1.2
Committed burst size, default value is ((cir+8191)/8192+1). Range: 1-32767 Unit: 2KByte/s
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..32767  

hwPwCmdPwCarExtPir 1.3.6.1.4.1.2011.5.12.8.1.2.32.1.3
Peak information rate, default value is double of committed information rate. Range: 1-1048575 Unit: 64Kbit/s
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..1048575  

hwPwCmdPwCarExtPbs 1.3.6.1.4.1.2011.5.12.8.1.2.32.1.4
Peak burst size, default value is MAX(((pir+8191)/8192 + 1), cbs). Range: 1-32767 Unit: 2KByte/s
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..32767  

hwPwCmdPwCarExtRowStatus 1.3.6.1.4.1.2011.5.12.8.1.2.32.1.5
For creating and modifying this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state. Options: 1. active(1) -indicates query operation 2. createAndGo(4) -indicates creating committed access rate parameters of a PW 3. destroy(6) -indicates deleting committed access rate parameters of a PW
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwPwAutoVccvTable 1.3.6.1.4.1.2011.5.12.8.1.2.33
This table specifies information for PW VCCV ping. The index of this table is pwIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwPwAutoVccvEntry

hwPwAutoVccvEntry 1.3.6.1.4.1.2011.5.12.8.1.2.33.1
This table specifies information for PW VCCV ping. The index of this entry is pwIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwPwAutoVccvEntry  

hwPwAutoVccvReplyMode 1.3.6.1.4.1.2011.5.12.8.1.2.33.1.1
The reply mode for the VCCV packet. Options: 1. doNotReply(1) -indicates that there is no reply for VCCV PING 2. replyViaAnIPv4IPv6UdpPacket(2) -indicates that reply for VCCV PING using IP UDP packets 3. replyViaAnIPv4IPv6UdpPacketWithRouterAlert(3) -indicates that reply for VCCV PING using IP UDP packets with router alert 4. replyViaApplicationLevelControlChannel(4) -indicates that reply for VCCV PING using control channel
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER doNotReply(1), replyViaAnIPv4IPv6UdpPacket(2), replyViaAnIPv4IPv6UdpPacketWithRouterAlert(3), replyViaApplicationLevelControlChannel(4)  

hwPwAutoVccvFrequency 1.3.6.1.4.1.2011.5.12.8.1.2.33.1.2
The frequency of VCCV packet. Options: 1. freq1000ms(1000) -indicates VCCV PING frequency, interval is 1000 ms 2. freq2000ms(2000) -indicates VCCV PING frequency, interval is 2000 ms 3. freq5000ms(5000) -indicates VCCV PING frequency, interval is 5000 ms 4. freq10000ms(10000) -indicates VCCV PING frequency, interval is 10000 ms
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER freq1000ms(1000), freq2000ms(2000), freq5000ms(5000), freq10000ms(10000)  

hwPwAutoVccvTimeoutLimit 1.3.6.1.4.1.2011.5.12.8.1.2.33.1.3
The timeout limit of VCCV ping. Range: 3-16
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 3..16  

hwPwAutoVccvRecoverLimit 1.3.6.1.4.1.2011.5.12.8.1.2.33.1.4
The recover limit of VCCV ping. Range: 1-16
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..16  

hwPwAutoVccvRemotePwID 1.3.6.1.4.1.2011.5.12.8.1.2.33.1.5
Indicates the PW Remote VcID in MH-PW. Range: 1-4294967295. When this leaf is set to 4294967295, it means that no remote PW ID is configured in the case of no creation, and that the configuration of remote PW ID is canceled in the case of modify operation.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4294967295  

hwPwAutoVccvRemoteIpAddress 1.3.6.1.4.1.2011.5.12.8.1.2.33.1.6
Indicates the PW Remote IP address in MH-PW.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwPwAutoVccvTtl 1.3.6.1.4.1.2011.5.12.8.1.2.33.1.7
Indicates the PW TTL value. Range: 0-255. When this leaf is set to 0, it means that no ttl value is configured in the case of no creation, and that the configuration of TTL value is canceled in the case of modify operation.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

hwPwAutoVccvPingStatus 1.3.6.1.4.1.2011.5.12.8.1.2.33.1.8
Indicates the VCCV ping status. Options: 1. normal(0) -indicates that VCCV PING can get reply from the peer and the PW connection is normal 2. break(1) -indicates that VCCV PING cannot reach the peer and the PW connection is break 3. inactive(2) -indicates that VCCV PING is not in work mode
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER normal(0), break(1), inactive(2)  

hwPwAutoVccvPingSuccessNum 1.3.6.1.4.1.2011.5.12.8.1.2.33.1.9
The number of VCCV ping succeed. Range: 0-4294967295
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwPwAutoVccvPingTimeOutNum 1.3.6.1.4.1.2011.5.12.8.1.2.33.1.10
The number of VCCV ping time out. Range: 0-4294967295
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwPwAutoVccvStatisticsReset 1.3.6.1.4.1.2011.5.12.8.1.2.33.1.11
Clear the traffic statistics of this pw. Options: 1. reset(1) -reset the traffic statistics of this PW
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER reset(1)  

hwPwAutoVccvPipeUniform 1.3.6.1.4.1.2011.5.12.8.1.2.33.1.12
For setting VCCV ping mode. Options: 1. pipe(1) -indicates pipe mode of the VCCV ping. 2. uniform(2) -indicates uniform mode of the VCCV ping. Default: pipe(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER pipe(1), uniform(2)  

hwPwAutoVccvRowStatus 1.3.6.1.4.1.2011.5.12.8.1.2.33.1.13
For creating and modifying this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state. Options: 1. active(1) -indicates query operation 2. createAndGo(4) -indicates creating an auto VCCV PING configuration 3. destroy(6) -indicates deleting an auto VCCV PING configuration
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwPwCmdConformance 1.3.6.1.4.1.2011.5.12.8.1.3
OBJECT IDENTIFIER    

hwPwCmdGroups 1.3.6.1.4.1.2011.5.12.8.1.3.1
OBJECT IDENTIFIER    

hwPwCmdVcGroup 1.3.6.1.4.1.2011.5.12.8.1.3.1.1
Collection of objects that are required in all implementations that support the PW CMD MIB module.
Status: current Access: read-write
OBJECT-GROUP    

hwPwCmdRemoteVcGroup 1.3.6.1.4.1.2011.5.12.8.1.3.1.2
Collection of objects that are required by remote PW.
Status: current Access: read-write
OBJECT-GROUP    

hwPwCmdTemplateGroup 1.3.6.1.4.1.2011.5.12.8.1.3.1.3
Collection of objects required to perform pw template related commands.
Status: current Access: read-write
OBJECT-GROUP    

hwPwCmdOperGroup 1.3.6.1.4.1.2011.5.12.8.1.3.1.4
Collection of objects required to perform pw reset related commands.
Status: current Access: read-write
OBJECT-GROUP    

hwPwCmdNonIfGroup 1.3.6.1.4.1.2011.5.12.8.1.3.1.5
Collection of objects that are required in fixed network.
Status: current Access: read-write
OBJECT-GROUP    

hwPwCmdVcNotificationControlGroup 1.3.6.1.4.1.2011.5.12.8.1.3.1.6
Collection of objects for controlling the PW notifications.
Status: current Access: read-write
OBJECT-GROUP    

hwPwCmdVcNotificationGroup 1.3.6.1.4.1.2011.5.12.8.1.3.1.7
Collection PW notifications objects.
Status: current Access: read-write
NOTIFICATION-GROUP    

hwPwCmdTrapsVbOids 1.3.6.1.4.1.2011.5.12.8.1.4
OBJECT IDENTIFIER    

hwPwCmdTunnId 1.3.6.1.4.1.2011.5.12.8.1.4.1
Indicates the index of tunnel. Range: 1-64
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32 1..64  

hwPwCmdTraps 1.3.6.1.4.1.2011.5.12.8.1.5
OBJECT IDENTIFIER    

hwPwCmdCommonTraps 1.3.6.1.4.1.2011.5.12.8.1.5.1
OBJECT IDENTIFIER    

hwPwCmdCommonTrapsPrefix 1.3.6.1.4.1.2011.5.12.8.1.5.1.0
OBJECT IDENTIFIER    

hwPwCmdPwStatus 1.3.6.1.4.1.2011.5.12.8.1.5.1.0.1
This notification is generated when the pw's status changed.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwPwCmdPwDeleted 1.3.6.1.4.1.2011.5.12.8.1.5.1.0.2
This notification is generated when the pw's deleted.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwPwCmdAlarmTraps 1.3.6.1.4.1.2011.5.12.8.1.5.2
OBJECT IDENTIFIER    

hwPwCmdAlarmTrapsPrefix 1.3.6.1.4.1.2011.5.12.8.1.5.2.0
OBJECT IDENTIFIER    

hwPwCmdSerRecov 1.3.6.1.4.1.2011.5.12.8.1.5.2.0.1
This notification is generated when the pw recovered the service. The first object is the index of the first pw, and the other is the index of the last pw.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwPwCmdSerFault 1.3.6.1.4.1.2011.5.12.8.1.5.2.0.2
This notification is generated when the pw service has some faults. The first object is the index of the first pw, and the other is the index of the last pw.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwPwCmdSerSwitchToSec 1.3.6.1.4.1.2011.5.12.8.1.5.2.0.3
This notification is generated when the service switches over to the secondary PW. The first object is the index of primary pw, and the other is the index of secondary pw.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwPwCmdSerSwitchToPri 1.3.6.1.4.1.2011.5.12.8.1.5.2.0.4
This notification is generated when the service switches over to the primary PW. The first object is the index of primary pw, and the other is the index of secondary pw.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwPwCmdTunnSwitchToW 1.3.6.1.4.1.2011.5.12.8.1.5.2.0.5
This notification is generated when the MPLS service switches from the protect tunnel to the work tunnel. The first object is the index of work-tunnel, and the other is the index of protect-tunnel.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwPwCmdTunnSwitchToP 1.3.6.1.4.1.2011.5.12.8.1.5.2.0.6
This notification is generated when the MPLS service switches from the work-tunnel to the protect-tunnel. The first object is the index of protect-tunnel, and the other is the index of work-tunnel.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor