HUAWEI-LOOPDETECT-MIB

File: HUAWEI-LOOPDETECT-MIB.mib (8178 bytes)

Imported modules

HUAWEI-MIB SNMPv2-SMI

Imported symbols

huawei Integer32 OBJECT-TYPE
NOTIFICATION-TYPE

Defined Types

HwLoopDetectCfgEntry  
SEQUENCE    
  hwLoopDetectCfgPortIndex Integer32
  hwLoopDetectCfgPortName OCTET STRING
  hwLoopDetectCfg Integer32
  hwLoopDetectCfgBlock Integer32
  hwLoopDetectCfgBlockTime Integer32
  hwLoopDetectCfgPriority Integer32
  hwLoopDetectCfgTrigger Integer32
  hwLoopDetectCfgSta Integer32

Defined Values

hwDatacomm 1.3.6.1.4.1.2011.25
OBJECT IDENTIFIER    

hwLoopDetectMIB 1.3.6.1.4.1.2011.25.180
The LoopDetect MIB module is defined to indicate loop-detect function of Huawei Technologies co.,Ltd.
MODULE-IDENTITY    

hwLoopDetectCfgTable 1.3.6.1.4.1.2011.25.180.1
Indicates the table that shows the loop detect configuration and blocking state.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwLoopDetectCfgEntry

hwLoopDetectCfgEntry 1.3.6.1.4.1.2011.25.180.1.1
Indicates the entries about the loop detect configuration and blocking state.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwLoopDetectCfgEntry  

hwLoopDetectCfgPortIndex 1.3.6.1.4.1.2011.25.180.1.1.1
Indicates the interface index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..2147483647  

hwLoopDetectCfgPortName 1.3.6.1.4.1.2011.25.180.1.1.2
Indicates the interface name.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..80)  

hwLoopDetectCfg 1.3.6.1.4.1.2011.25.180.1.1.3
Indicates whether the loop detect function is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwLoopDetectCfgBlock 1.3.6.1.4.1.2011.25.180.1.1.4
Indicates whether the interface can enter the blocking state after a loop is detected.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwLoopDetectCfgBlockTime 1.3.6.1.4.1.2011.25.180.1.1.5
Indicates the interval that is used to judge whether the loop disappears and the blocking state ends.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwLoopDetectCfgPriority 1.3.6.1.4.1.2011.25.180.1.1.6
Indicates the priority in loop detect.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwLoopDetectCfgTrigger 1.3.6.1.4.1.2011.25.180.1.1.7
Indicates whether the function of immediate interface Down/Up is triggered after a loop is detected.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwLoopDetectCfgSta 1.3.6.1.4.1.2011.25.180.1.1.8
Identify the interface that is blocked after a loop is detected.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwLoopDetectTraps 1.3.6.1.4.1.2011.25.180.2
OBJECT IDENTIFIER    

hwLoopDetectEnabled 1.3.6.1.4.1.2011.25.180.2.1
The loop detect function is enabled.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwLoopDetectDisabled 1.3.6.1.4.1.2011.25.180.2.2
The loop detect function is disabled.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwLoopDetectBlocked 1.3.6.1.4.1.2011.25.180.2.3
The interface is blocked.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwLoopDetectUnBlocked 1.3.6.1.4.1.2011.25.180.2.4
The interface is unblocked.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwLoopDetectGroups 1.3.6.1.4.1.2011.25.180.3
OBJECT IDENTIFIER    

hwLoopDetectCfgEntryGroup 1.3.6.1.4.1.2011.25.180.3.1
Entries about the loop detect configuration and blocking state group.
Status: current Access: read-only
OBJECT-GROUP    

hwLoopDetectTrapsGroup 1.3.6.1.4.1.2011.25.180.3.2
Loop-detect traps group.
Status: current Access: read-only
NOTIFICATION-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor