HUAWEI-LINE-COMMON-MIB

File: HUAWEI-LINE-COMMON-MIB.mib (61846 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-TC	IF-MIB
SNMPv2-CONF	RMON-MIB	HUAWEI-DEVICE-MIB
HUAWEI-MIB

Imported symbols

MODULE-IDENTITY	mib-2	OBJECT-TYPE
Counter32	Counter64	Unsigned32
Integer32	zeroDotZero	IpAddress
Gauge32	NOTIFICATION-TYPE	TruthValue
DateAndTime	RowStatus	MacAddress
TEXTUAL-CONVENTION	ifIndex	MODULE-COMPLIANCE
OBJECT-GROUP	OwnerString	EntryStatus
hwFrameIndex	hwSlotIndex	hwSubslotIndex
hwPortIndex	hwConfigChangeIP	huaweiMgmt
huaweiUtility

Defined Types

HwOpticsDdmInfoExEntry
SEQUENCE
	hwOpticsDdmInfoExTemperature	Integer32
	hwOpticsDdmInfoExTemperatureHighAlarmThreshold	Integer32
	hwOpticsDdmInfoExTemperatureLowAlarmThreshold	Integer32
	hwOpticsDdmInfoExTemperatureHighWarningThreshold	Integer32
	hwOpticsDdmInfoExTemperatureLowWarningThreshold	Integer32
	hwOpticsDdmInfoExSupplyVoltage	Integer32
	hwOpticsDdmInfoExSupplyVoltageHighAlarmThreshold	Integer32
	hwOpticsDdmInfoExSupplyVoltageLowAlarmThreshold	Integer32
	hwOpticsDdmInfoExSupplyVoltageHighWarningThreshold	Integer32
	hwOpticsDdmInfoExSupplyVoltageLowWarningThreshold	Integer32
	hwOpticsDdmInfoExTxBiasCurrent	Integer32
	hwOpticsDdmInfoExTxBiasCurrentHighAlarmThreshold	Integer32
	hwOpticsDdmInfoExTxBiasCurrentLowAlarmThreshold	Integer32
	hwOpticsDdmInfoExTxBiasCurrentHighWarningThreshold	Integer32
	hwOpticsDdmInfoExTxBiasCurrentLowWarningThreshold	Integer32
	hwOpticsDdmInfoExTxPower	Integer32
	hwOpticsDdmInfoExTxPowerHighAlarmThreshold	Integer32
	hwOpticsDdmInfoExTxPowerLowAlarmThreshold	Integer32
	hwOpticsDdmInfoExTxPowerHighWarningThreshold	Integer32
	hwOpticsDdmInfoExTxPowerLowWarningThreshold	Integer32
	hwOpticsDdmInfoExRxPower	Integer32
	hwOpticsDdmInfoExRxPowerHighAlarmThreshold	Integer32
	hwOpticsDdmInfoExRxPowerLowAlarmThreshold	Integer32
	hwOpticsDdmInfoExRxPowerHighWarningThreshold	Integer32
	hwOpticsDdmInfoExRxPowerLowWarningThreshold	Integer32
	hwOpticsDdmInfo10GTxBiasCurrent	Integer32
	hwOpticsDdmInfo10GTxPower	Integer32
	hwOpticsDdmInfoExCatvRxPowerHighAlarmThreshold	Integer32
	hwOpticsDdmInfoExCatvRxPowerLowAlarmThreshold	Integer32
	hwOpticsDdmInfoExModuleType	INTEGER
	hwOpticsDdmInfoExSubType	INTEGER
	hwOpticsDdmInfoExPrecision	Integer32
	hwOpticsDdmInfoExEncapsulationType	INTEGER
	hwOpticsDdmInfoExVendorPN	OCTET STRING
	hwOpticsDdmInfoExUsedType	INTEGER

HwXponDeviceOntDdmInfoExEntry
SEQUENCE
	hwXponOntDdmInfoExOntIndex	Integer32
	hwXponOntDdmInfoExTemperature	Integer32
	hwXponOntDdmInfoExTemperatureHighAlarmThreshold	Integer32
	hwXponOntDdmInfoExTemperatureLowAlarmThreshold	Integer32
	hwXponOntDdmInfoExTemperatureHighWarningThreshold	Integer32
	hwXponOntDdmInfoExTemperatureLowWarningThreshold	Integer32
	hwXponOntDdmInfoExSupplyVoltage	Integer32
	hwXponOntDdmInfoExSupplyVoltageHighAlarmThreshold	Integer32
	hwXponOntDdmInfoExSupplyVoltageLowAlarmThreshold	Integer32
	hwXponOntDdmInfoExSupplyVoltageHighWarningThreshold	Integer32
	hwXponOntDdmInfoExSupplyVoltageLowWarningThreshold	Integer32
	hwXponOntDdmInfoExTxBiasCurrent	Integer32
	hwXponOntDdmInfoExTxBiasCurrentHighAlarmThreshold	Integer32
	hwXponOntDdmInfoExTxBiasCurrentLowAlarmThreshold	Integer32
	hwXponOntDdmInfoExTxBiasCurrentHighWarningThreshold	Integer32
	hwXponOntDdmInfoExTxBiasCurrentLowWarningThreshold	Integer32
	hwXponOntDdmInfoExTxPower	Integer32
	hwXponOntDdmInfoExTxPowerHighAlarmThreshold	Integer32
	hwXponOntDdmInfoExTxPowerLowAlarmThreshold	Integer32
	hwXponOntDdmInfoExTxPowerHighWarningThreshold	Integer32
	hwXponOntDdmInfoExTxPowerLowWarningThreshold	Integer32
	hwXponOntDdmInfoExRxPower	Integer32
	hwXponOntDdmInfoExRxPowerHighAlarmThreshold	Integer32
	hwXponOntDdmInfoExRxPowerLowAlarmThreshold	Integer32
	hwXponOntDdmInfoExRxPowerHighWarningThreshold	Integer32
	hwXponOntDdmInfoExRxPowerLowWarningThreshold	Integer32
	hwXponOntDdmInfoExOltRxOntPower	Integer32
	hwXponOntDdmInfoExCatvRxPowerHighAlarmThreshold	Integer32
	hwXponOntDdmInfoExCatvRxPowerLowAlarmThreshold	Integer32
	hwXponOntDdmInfoExModuleType	INTEGER
	hwXponOntDdmInfoExSubType	INTEGER
	hwXponOntDdmInfoExPrecision	Integer32
	hwXponOntDdmInfoExEncapsulationType	INTEGER
	hwXponOntDdmInfoExVendorPN	OCTET STRING
	hwXponOntDdmInfoExUsedType	INTEGER

Defined Values

hwAccessCommonMIB		1.3.6.1.4.1.2011.6.158
The MIB is used for defining Huawei's ACCESS management common MIB objects.
MODULE-IDENTITY

hwAccessCommonObjectMIB		1.3.6.1.4.1.2011.6.158.1
OBJECT IDENTIFIER

hwLineCommonTrapsVbOids		1.3.6.1.4.1.2011.6.158.50
OBJECT IDENTIFIER

hwLineCommonTraps		1.3.6.1.4.1.2011.6.158.51
OBJECT IDENTIFIER

hwLineTraps		1.3.6.1.4.1.2011.6.158.51.1
OBJECT IDENTIFIER

hwLineTrapsPrefix		1.3.6.1.4.1.2011.6.158.51.1.0
OBJECT IDENTIFIER

hwLineAlarmTraps		1.3.6.1.4.1.2011.6.158.51.2
OBJECT IDENTIFIER

hwLineAlarmTrapsPrefix		1.3.6.1.4.1.2011.6.158.51.2.0
OBJECT IDENTIFIER

hwAccessCommonObjects		1.3.6.1.4.1.2011.6.158.1.1
OBJECT IDENTIFIER

hwAccessCommonControlObjects		1.3.6.1.4.1.2011.6.158.1.1.1
OBJECT IDENTIFIER

hwAccessCommonStatisticObjects		1.3.6.1.4.1.2011.6.158.1.1.2
OBJECT IDENTIFIER

hwOpticsDdmInfoExTable		1.3.6.1.4.1.2011.6.158.1.1.1.1
Table hwOpticsDdmInfoExTable supports the query of the information about the optical transceiver. The index of this table is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwOpticsDdmInfoExEntry

hwOpticsDdmInfoExEntry		1.3.6.1.4.1.2011.6.158.1.1.1.1.1
Table hwOpticsDdmInfoExTable supports the query of the information about the optical transceiver. The index of this entry is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwOpticsDdmInfoExEntry

hwOpticsDdmInfoExTemperature		1.3.6.1.4.1.2011.6.158.1.1.1.1.1.1
Temperature of the optical transceiver. Unit: 0.000001 C(centigrade) Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwOpticsDdmInfoExTemperatureHighAlarmThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.1.1.2
Upper alarm threshold of the temperature. Unit: 0.000001 C(centigrade) Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwOpticsDdmInfoExTemperatureLowAlarmThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.1.1.3
Lower alarm threshold of the temperature. Unit: 0.000001 C(centigrade) Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwOpticsDdmInfoExTemperatureHighWarningThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.1.1.4
Upper warning threshold of the temperature. Unit: 0.000001 C(centigrade) Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwOpticsDdmInfoExTemperatureLowWarningThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.1.1.5
Lower warning threshold of the temperature. Unit: 0.000001 C(centigrade) Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwOpticsDdmInfoExSupplyVoltage		1.3.6.1.4.1.2011.6.158.1.1.1.1.1.6
Voltage of the optical transceiver. Unit: 0.000001V Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwOpticsDdmInfoExSupplyVoltageHighAlarmThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.1.1.7
Upper alarm threshold of the voltage. Unit: 0.000001V Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwOpticsDdmInfoExSupplyVoltageLowAlarmThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.1.1.8
Lower alarm threshold of the voltage. Unit: 0.000001V Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwOpticsDdmInfoExSupplyVoltageHighWarningThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.1.1.9
Upper warning threshold of the voltage. Unit: 0.000001V Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwOpticsDdmInfoExSupplyVoltageLowWarningThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.1.1.10
Lower warning threshold of the voltage. Unit: 0.000001V Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwOpticsDdmInfoExTxBiasCurrent		1.3.6.1.4.1.2011.6.158.1.1.1.1.1.11
Current of the optical transceiver. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwOpticsDdmInfoExTxBiasCurrentHighAlarmThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.1.1.12
Upper alarm threshold of the bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwOpticsDdmInfoExTxBiasCurrentLowAlarmThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.1.1.13
Lower alarm threshold of the bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwOpticsDdmInfoExTxBiasCurrentHighWarningThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.1.1.14
Upper warning threshold of the bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwOpticsDdmInfoExTxBiasCurrentLowWarningThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.1.1.15
Lower warning threshold of the bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwOpticsDdmInfoExTxPower		1.3.6.1.4.1.2011.6.158.1.1.1.1.1.16
Tx optical power of the optical transceiver. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwOpticsDdmInfoExTxPowerHighAlarmThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.1.1.17
Upper alarm threshold of the Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwOpticsDdmInfoExTxPowerLowAlarmThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.1.1.18
Lower alarm threshold of the Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwOpticsDdmInfoExTxPowerHighWarningThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.1.1.19
Upper warning threshold of the Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwOpticsDdmInfoExTxPowerLowWarningThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.1.1.20
Lower warning threshold of the Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwOpticsDdmInfoExRxPower		1.3.6.1.4.1.2011.6.158.1.1.1.1.1.21
Rx optical power of the optical transceiver. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwOpticsDdmInfoExRxPowerHighAlarmThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.1.1.22
Upper alarm threshold of the Rx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwOpticsDdmInfoExRxPowerLowAlarmThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.1.1.23
Lower alarm threshold of the Rx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwOpticsDdmInfoExRxPowerHighWarningThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.1.1.24
Upper warning threshold of the Rx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwOpticsDdmInfoExRxPowerLowWarningThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.1.1.25
Lower warning threshold of the Rx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwOpticsDdmInfo10GTxBiasCurrent		1.3.6.1.4.1.2011.6.158.1.1.1.1.1.26
Current of the 10g optical transceiver. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwOpticsDdmInfo10GTxPower		1.3.6.1.4.1.2011.6.158.1.1.1.1.1.27
Tx optical power of the 10g optical transceiver. Unit: 0.01dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwOpticsDdmInfoExCatvRxPowerHighAlarmThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.1.1.28
Upper AlarmThreshold threshold of the CATV Rx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwOpticsDdmInfoExCatvRxPowerLowAlarmThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.1.1.29
Lower AlarmThreshold threshold of the CATV Rx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwOpticsDdmInfoExModuleType		1.3.6.1.4.1.2011.6.158.1.1.1.1.1.30
Options: 1. gpon(1) - GPON 2. epon(2) - EPON 3. epon10g(3) - 10G EPON 4. gpon10g(4) - 10G GPON 5. wdmpon(5) - WDM PON 6. hybridpon(6) - hybrid PON 7. gponepon(7) - GPON/EPON 8. unknown(8) - Unknown 9. invalid(-1) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	gpon(1), epon(2), epon10g(3), gpon10g(4), wdmpon(5), hybridpon(6), gponepon(7), unknown(8), invalid(-1)

hwOpticsDdmInfoExSubType		1.3.6.1.4.1.2011.6.158.1.1.1.1.1.31
Options: 1. classbplus(1) - CLASS B+ 2. classcplus(2) - CLASS C+ 3. classb(3) - CLASS B 4. n2a(33) - N2a 5. n2b(34) - N2b 6. n1(35) - N1 7. px20(65) - PX20 8. px20plus(66) - PX20+ 9. pr30(97) - PR30 10. pr20(98) - PR20 11. prx30(99) - PRX30 12. prx20(100) - PRX20 13. classbPlusAndPx20Plus(129) - GPON CLASS B+/EPON PX20+ 14. classbAndPx20(130) - GPON CLASS B/EPON PX20 15. unknown(145) - Unknown 16. invalid(-1) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	classbplus(1), classcplus(2), classb(3), n2a(33), n2b(34), n1(35), px20(65), px20plus(66), pr30(97), pr20(98), prx30(99), prx20(100), classbPlusAndPx20Plus(129), classbAndPx20(130), unknown(145), invalid(-1)

hwOpticsDdmInfoExPrecision		1.3.6.1.4.1.2011.6.158.1.1.1.1.1.32
This object indicates the precision of optical power. Unit: 0.1dBm Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwOpticsDdmInfoExEncapsulationType		1.3.6.1.4.1.2011.6.158.1.1.1.1.1.33
Options: 1. sff2x5(1) - SFF 2x5 2. sff2x10(2) - SFF 2x10 3. sfp(3) - SFP 4. xfp(4) - XFP 5. lxfp(5) - LXFP 6. bosaonboard(6) - BOSA ON BOARD 7. unknown(7) - Unknown 8. invalid(-1) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	sff2x5(1), sff2x10(2), sfp(3), xfp(4), lxfp(5), bosaonboard(6), unknown(7), invalid(-1)

hwOpticsDdmInfoExVendorPN		1.3.6.1.4.1.2011.6.158.1.1.1.1.1.34
This object indicates the part number.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..17)

hwOpticsDdmInfoExUsedType		1.3.6.1.4.1.2011.6.158.1.1.1.1.1.35
This object indicates the application scenario of the optical transceiver. Options: 1. olt(1) - OLT 2. onu(3) - ONU 3. catvtriplex(4) - CATV TriPlex 4. unknown(5) - Unknown 5. invalid(-1) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	olt(1), onu(3), catvtriplex(4), unknown(5), invalid(-1)

hwXponDeviceOntDdmInfoExTable		1.3.6.1.4.1.2011.6.158.1.1.1.2
Table hwXponDeviceOntDdmInfoExTable supports the query of the information about the optical transceiver of the ONT port. The index of this table is a combination of ifIndex and hwXponOntDdmInfoExOntIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwXponDeviceOntDdmInfoExEntry

hwXponDeviceOntDdmInfoExEntry		1.3.6.1.4.1.2011.6.158.1.1.1.2.1
Table hwXponDeviceOntDdmInfoExTable supports the query of the information about the optical transceiver of the ONT port. The index of this entry is a combination of ifIndex and hwXponOntDdmInfoExOntIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwXponDeviceOntDdmInfoExEntry

hwXponOntDdmInfoExOntIndex		1.3.6.1.4.1.2011.6.158.1.1.1.2.1.1
ONT ID, range: 0-127
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hwXponOntDdmInfoExTemperature		1.3.6.1.4.1.2011.6.158.1.1.1.2.1.2
Temperature of the optical transceiver on the ONT. Unit: 0.000001 C(centigrade) Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwXponOntDdmInfoExTemperatureHighAlarmThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.2.1.3
Upper alarm threshold of the temperature. Unit: 0.000001 C(centigrade) Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwXponOntDdmInfoExTemperatureLowAlarmThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.2.1.4
Lower alarm threshold of the temperature. Unit: 0.000001 C(centigrade) Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwXponOntDdmInfoExTemperatureHighWarningThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.2.1.5
Upper warning threshold of the temperature. Unit: 0.000001 C(centigrade) Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwXponOntDdmInfoExTemperatureLowWarningThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.2.1.6
Lower warning threshold of the temperature. Unit: 0.000001 C(centigrade) Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwXponOntDdmInfoExSupplyVoltage		1.3.6.1.4.1.2011.6.158.1.1.1.2.1.7
Voltage of the optical transceiver on the ONT. Unit: 0.000001V Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwXponOntDdmInfoExSupplyVoltageHighAlarmThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.2.1.8
Upper alarm threshold of the voltage. Unit: 0.000001V Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwXponOntDdmInfoExSupplyVoltageLowAlarmThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.2.1.9
Lower alarm threshold of the voltage. Unit: 0.000001V Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwXponOntDdmInfoExSupplyVoltageHighWarningThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.2.1.10
Upper warning threshold of the voltage. Unit: 0.000001V Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwXponOntDdmInfoExSupplyVoltageLowWarningThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.2.1.11
Lower warning threshold of the voltage. Unit: 0.000001V Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwXponOntDdmInfoExTxBiasCurrent		1.3.6.1.4.1.2011.6.158.1.1.1.2.1.12
Current of the optical transceiver on the ONT. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwXponOntDdmInfoExTxBiasCurrentHighAlarmThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.2.1.13
Upper alarm threshold of the bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwXponOntDdmInfoExTxBiasCurrentLowAlarmThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.2.1.14
Lower alarm threshold of the bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwXponOntDdmInfoExTxBiasCurrentHighWarningThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.2.1.15
Upper warning threshold of the bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwXponOntDdmInfoExTxBiasCurrentLowWarningThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.2.1.16
Lower warning threshold of the bias current. Unit: 0.000001A Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwXponOntDdmInfoExTxPower		1.3.6.1.4.1.2011.6.158.1.1.1.2.1.17
Tx optical power of the optical transceiver on the ONT. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwXponOntDdmInfoExTxPowerHighAlarmThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.2.1.18
Upper alarm threshold of the Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwXponOntDdmInfoExTxPowerLowAlarmThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.2.1.19
Lower alarm threshold of the Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwXponOntDdmInfoExTxPowerHighWarningThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.2.1.20
Upper warning threshold of the Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwXponOntDdmInfoExTxPowerLowWarningThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.2.1.21
Lower warning threshold of the Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwXponOntDdmInfoExRxPower		1.3.6.1.4.1.2011.6.158.1.1.1.2.1.22
Rx optical power of the optical transceiver on the ONT. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwXponOntDdmInfoExRxPowerHighAlarmThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.2.1.23
Upper alarm threshold of the Rx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwXponOntDdmInfoExRxPowerLowAlarmThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.2.1.24
Lower alarm threshold of the Rx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwXponOntDdmInfoExRxPowerHighWarningThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.2.1.25
Upper warning threshold of the Rx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwXponOntDdmInfoExRxPowerLowWarningThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.2.1.26
Lower warning threshold of the Rx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwXponOntDdmInfoExOltRxOntPower		1.3.6.1.4.1.2011.6.158.1.1.1.2.1.27
threshold of the ont Tx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwXponOntDdmInfoExCatvRxPowerHighAlarmThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.2.1.28
Upper AlarmThreshold threshold of the CATV Rx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwXponOntDdmInfoExCatvRxPowerLowAlarmThreshold		1.3.6.1.4.1.2011.6.158.1.1.1.2.1.29
Lower AlarmThreshold threshold of the CATV Rx power. Unit: 0.000001dBm Options: 1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwXponOntDdmInfoExModuleType		1.3.6.1.4.1.2011.6.158.1.1.1.2.1.30
Options: 1. gpon(1) - GPON 2. epon(2) - EPON 3. epon10g(3) - 10G EPON 4. gpon10g(4) - 10G GPON 5. wdmpon(5) - WDM PON 6. hybridpon(6) - hybrid PON 7. gponepon(7) - GPON/EPON 8. unknown(8) - Unknown 9. invalid(-1) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	gpon(1), epon(2), epon10g(3), gpon10g(4), wdmpon(5), hybridpon(6), gponepon(7), unknown(8), invalid(-1)

hwXponOntDdmInfoExSubType		1.3.6.1.4.1.2011.6.158.1.1.1.2.1.31
Options: 1. classbplus(1) - CLASS B+ 2. classcplus(2) - CLASS C+ 3. classb(3) - CLASS B 4. n2a(33) - N2a 5. n2b(34) - N2b 6. n1(35) - N1 7. px20(65) - PX20 8. px20plus(66) - PX20+ 9. pr30(97) - PR30 10. pr20(98) - PR20 11. prx30(99) - PRX30 12. prx20(100) - PRX20 13. classbPlusAndPx20Plus(129) - GPON CLASS B+/EPON PX20+ 14. classbAndPx20(130) - GPON CLASS B/EPON PX20 15. unknown(145) - Unknown 16. invalid(-1) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	classbplus(1), classcplus(2), classb(3), n2a(33), n2b(34), n1(35), px20(65), px20plus(66), pr30(97), pr20(98), prx30(99), prx20(100), classbPlusAndPx20Plus(129), classbAndPx20(130), unknown(145), invalid(-1)

hwXponOntDdmInfoExPrecision		1.3.6.1.4.1.2011.6.158.1.1.1.2.1.32
This object indicates the precision of optical power. Unit: 0.1dBm Options: 1. invalid(-1) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwXponOntDdmInfoExEncapsulationType		1.3.6.1.4.1.2011.6.158.1.1.1.2.1.33
Options: 1. sff2x5(1) - SFF 2x5 2. sff2x10(2) - SFF 2x10 3. sfp(3) - SFP 4. xfp(4) - XFP 5. lxfp(5) - LXFP 6. bosaonboard(6) - BOSA ON BOARD 7. unknown(7) - Unknown 8. invalid(-1) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	sff2x5(1), sff2x10(2), sfp(3), xfp(4), lxfp(5), bosaonboard(6), unknown(7), invalid(-1)

hwXponOntDdmInfoExVendorPN		1.3.6.1.4.1.2011.6.158.1.1.1.2.1.34
This object indicates the part number.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..17)

hwXponOntDdmInfoExUsedType		1.3.6.1.4.1.2011.6.158.1.1.1.2.1.35
This object indicates the application scenario of the optical transceiver. Options: 1. olt(1) - OLT 2. onu(3) - ONU 3. catvtriplex(4) - CATV TriPlex 4. unknown(5) - Unknown 5. invalid(-1) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	olt(1), onu(3), catvtriplex(4), unknown(5), invalid(-1)

hwPortHostmode		1.3.6.1.4.1.2011.6.158.50.1
The port host mode. Options: 1. geMode(7) - Ge mode 2. adaptMode(27) - Adapt mode 3. gponMode(114) - Gpon mode 4. eponMode(115) - Epon mode
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	geMode(7), adaptMode(27), gponMode(114), eponMode(115)

hwPortActualmode		1.3.6.1.4.1.2011.6.158.50.2
The port actual mode. Options: 1. geMode(7) - Ge mode 2. adaptMode(27) - Adapt mode 3. gponMode(114) - Gpon mode 4. eponMode(115) - Epon mode
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	geMode(7), adaptMode(27), gponMode(114), eponMode(115)

hwReservedValue		1.3.6.1.4.1.2011.6.158.50.3
Reserved value.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Integer32

hwPortTypeAdaptFaultAlarmTrap		1.3.6.1.4.1.2011.6.158.51.2.0.1
Port type adaptation fault alarm trap. This trap message is generated when the uplink port on the ONU is set to work in adaptive mode, the type of the OLT downlink port transmitting the optical signal is different from the type of the uplink port on the ONU. As a result, the uplink port on the ONU is faulty.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwPortTypeAdaptFaultRestoreAlarmTrap		1.3.6.1.4.1.2011.6.158.51.2.0.2
Port type adaptation fault recovery alarm trap. This trap message is generated when the uplink port on the ONU is set to work in adaptive mode, the type of the OLT downlink port transmitting the optical signal is the same as the type of the uplink port on the ONU, and the service on the uplink port is restored.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwPortTypeAdaptSuccessAlarmTrap		1.3.6.1.4.1.2011.6.158.51.2.0.3
Port type adaptation success alarm trap. This trap message is generated when the type of the OLT downlink port transmitting the optical signal changes, the adaptation of the uplink port on the ONU is successful.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwXponnniPortSwitchAlarmTrap		1.3.6.1.4.1.2011.6.158.51.2.0.4
Protection switchover occurs on the PON port and it has no effect on the service. The first hwPortIndex is the source port index, the second hwPortIndex is the destination port index.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwXponnniPortSwitchTrap		1.3.6.1.4.1.2011.6.158.51.1.0.1
TypeC or TypeD port switch trap. The first ifIndex is the active one after switching over. The second ifIndex is the standby one after switching over.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE