HUAWEI-IPDSLAM-SIMULATION-MIB

File: HUAWEI-IPDSLAM-SIMULATION-MIB.mib (65506 bytes)

Imported modules

Imported symbols

huaweiMgmt	IpAddress	Integer32
Unsigned32	OBJECT-TYPE	MODULE-IDENTITY
NOTIFICATION-TYPE	RowStatus	MacAddress

Defined Types

HwDhcpSimulateCfgEntry
SEQUENCE
	hwDhcpSimulateFlowId	Integer32
	hwDhcpSimulateMacAddress	MacAddress
	hwDhcpSimulateUserVlanTagNumber	Unsigned32
	hwDhcpSimulateUserVlanid	Unsigned32
	hwDhcpSimulateOption60	OCTET STRING
	hwDhcpSimulateOption61Type	Unsigned32
	hwDhcpSimulateOption61ClientId	OCTET STRING
	hwDhcpSimulatePingHost1IPAddress	IpAddress
	hwDhcpSimulatePingHost2IPAddress	IpAddress
	hwDhcpSimulatePingHost3IPAddress	IpAddress
	hwDhcpSimulatePingHost4IPAddress	IpAddress
	hwDhcpSimulatePingHost5IPAddress	IpAddress
	hwDhcpSimulateRowStatus	RowStatus

HwDhcpSimulateResultEntry
SEQUENCE
	hwDhcpSimulateStatus	INTEGER
	hwDhcpSimulateResult	INTEGER
	hwDhcpSimulateUserIp	IpAddress
	hwDhcpSimulateSubNetMask	IpAddress
	hwDhcpSimulateDhcpServerIp	IpAddress
	hwDhcpSimulatePrimaryDnsServerIp	IpAddress
	hwDhcpSimulateSecondaryDnsServerIp	IpAddress
	hwDhcpSimulateGatewayIp	IpAddress
	hwDhcpSimulateDefaultGatewayIp	IpAddress
	hwDhcpSimulateDest1IpAddr	IpAddress
	hwDhcpSimulateDest1MaskAddr	IpAddress
	hwDhcpSimulateDest1NextHop	IpAddress
	hwDhcpSimulateDest2IpAddr	IpAddress
	hwDhcpSimulateDest2MaskAddr	IpAddress
	hwDhcpSimulateDest2NextHop	IpAddress
	hwDhcpSimulateDest3IpAddr	IpAddress
	hwDhcpSimulateDest3MaskAddr	IpAddress
	hwDhcpSimulateDest3NextHop	IpAddress
	hwDhcpSimulatePingHost1TotalCount	Unsigned32
	hwDhcpSimulatePingHost1OkCount	Unsigned32
	hwDhcpSimulatePingHost2TotalCount	Unsigned32
	hwDhcpSimulatePingHost2OkCount	Unsigned32
	hwDhcpSimulatePingHost3TotalCount	Unsigned32
	hwDhcpSimulatePingHost3OkCount	Unsigned32
	hwDhcpSimulatePingHost4TotalCount	Unsigned32
	hwDhcpSimulatePingHost4OkCount	Unsigned32
	hwDhcpSimulatePingHost5TotalCount	Unsigned32
	hwDhcpSimulatePingHost5OkCount	Unsigned32
	hwDhcpSimulateTftpServer	OCTET STRING
	hwDhcpSimulateBootFileName	OCTET STRING
	hwDhcpSimulateTimeServerIp	IpAddress

HwOntDhcpSimulateCfgEntry
SEQUENCE
	hwOntDhcpSimulatePortindex	Unsigned32
	hwOntDhcpSimulateOntId	Integer32
	hwOntDhcpSimulateOntPortId	Unsigned32
	hwOntDhcpSimulateUserVlanTagNumber	Unsigned32
	hwOntDhcpSimulateUserOuterVlanId	Unsigned32
	hwOntDhcpSimulateUserOuterPriority	Unsigned32
	hwOntDhcpSimulateUserInnerVlanId	Unsigned32
	hwOntDhcpSimulateUserInnerPriority	Unsigned32
	hwOntDhcpSimulateMacAddress	MacAddress
	hwOntDhcpSimulateOption60	OCTET STRING
	hwOntDhcpSimulateOption61Type	Unsigned32
	hwOntDhcpSimulateOption61ClientId	OCTET STRING
	hwOntDhcpSimulatePingHost1IPAddress	IpAddress
	hwOntDhcpSimulatePingHost2IPAddress	IpAddress
	hwOntDhcpSimulatePingHost3IPAddress	IpAddress
	hwOntDhcpSimulatePingHost4IPAddress	IpAddress
	hwOntDhcpSimulatePingHost5IPAddress	IpAddress
	hwOntDhcpSimulateRowStatus	RowStatus

HwOntDhcpSimulateResultEntry
SEQUENCE
	hwOntDhcpSimulateStatus	INTEGER
	hwOntDhcpSimulateResult	INTEGER
	hwOntDhcpSimulateUserIp	IpAddress
	hwOntDhcpSimulateSubNetMask	IpAddress
	hwOntDhcpSimulateDhcpServerIp	IpAddress
	hwOntDhcpSimulatePrimaryDnsServerIp	IpAddress
	hwOntDhcpSimulateSecondaryDnsServerIp	IpAddress
	hwOntDhcpSimulateGatewayIp	IpAddress
	hwOntDhcpSimulateDefaultGatewayIp	IpAddress
	hwOntDhcpSimulateDest1IpAddr	IpAddress
	hwOntDhcpSimulateDest1MaskAddr	IpAddress
	hwOntDhcpSimulateDest1NextHop	IpAddress
	hwOntDhcpSimulateDest2IpAddr	IpAddress
	hwOntDhcpSimulateDest2MaskAddr	IpAddress
	hwOntDhcpSimulateDest2NextHop	IpAddress
	hwOntDhcpSimulateDest3IpAddr	IpAddress
	hwOntDhcpSimulateDest3MaskAddr	IpAddress
	hwOntDhcpSimulateDest3NextHop	IpAddress
	hwOntDhcpSimulatePingHost1TotalCount	Unsigned32
	hwOntDhcpSimulatePingHost1OkCount	Unsigned32
	hwOntDhcpSimulatePingHost2TotalCount	Unsigned32
	hwOntDhcpSimulatePingHost2OkCount	Unsigned32
	hwOntDhcpSimulatePingHost3TotalCount	Unsigned32
	hwOntDhcpSimulatePingHost3OkCount	Unsigned32
	hwOntDhcpSimulatePingHost4TotalCount	Unsigned32
	hwOntDhcpSimulatePingHost4OkCount	Unsigned32
	hwOntDhcpSimulatePingHost5TotalCount	Unsigned32
	hwOntDhcpSimulatePingHost5OkCount	Unsigned32

Defined Values

hwIpdslamSimulation		1.3.6.1.4.1.2011.5.113
The MIB is used to configure the simulation for the DSLAM.
MODULE-IDENTITY

hwDhcpSimulateObject		1.3.6.1.4.1.2011.5.113.1
OBJECT IDENTIFIER

hwOntDhcpSimulateObject		1.3.6.1.4.1.2011.5.113.2
OBJECT IDENTIFIER

hwDhcpSimulateCfgTable		1.3.6.1.4.1.2011.5.113.1.1
This table is mainly used to configure the DHCP simulation. You can use the set operation to set a leave in the table to start a DHCP simulation instance and simulate an actual user. You can use the get operation to query the existing DHCP simulation instances in the current system. The indexes of this table are hwDhcpSimulateFlowId and hwDhcpSimulateMacAddress.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwDhcpSimulateCfgEntry

hwDhcpSimulateCfgEntry		1.3.6.1.4.1.2011.5.113.1.1.1
This table is mainly used to configure the DHCP simulation. You can use the set operation to set a leave in the table to start a DHCP simulation instance and simulate an actual user. You can use the get operation to query the existing DHCP simulation instances in the current system. The indexes of this entry are hwDhcpSimulateFlowId and hwDhcpSimulateMacAddress.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwDhcpSimulateCfgEntry

hwDhcpSimulateFlowId		1.3.6.1.4.1.2011.5.113.1.1.1.1
Indicates the flow ID of the user to be simulated. This leave is the index of hwDhcpSimulateCfgTable. The value of this leave must be set when a DHCP simulation is started on the OLT.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hwDhcpSimulateMacAddress		1.3.6.1.4.1.2011.5.113.1.1.1.2
Indicates the MAC address of the user to be simulated. In the start of DHCP simulation, the recommended MAC address corresponding this leave is the MAC address of an actual user. This leave is the index of hwDhcpSimulateCfgTable. The value of this leave must be set when a DHCP simulation is started on the OLT.
Status: current	Access: not-accessible
OBJECT-TYPE
	MacAddress

hwDhcpSimulateUserVlanTagNumber		1.3.6.1.4.1.2011.5.113.1.1.1.3
Indicates the number of tags carried by the user-side packet. Options: 1. untag(0) -Indicates that the user packet is untagged. 2. singleTag(1) -Indicates that the user packet is single tag.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

hwDhcpSimulateUserVlanid		1.3.6.1.4.1.2011.5.113.1.1.1.4
Indicates the VLAN ID of the user-side packet. If hwDhcpSimulateUserVlanTagNumber is 0, this item does not need to be configured. If the value of this leave is 0 and hwDhcpSimulateUserVlanTagNumber is 1, the current mode is priority-tag. Range: 0-4095.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

hwDhcpSimulateOption60		1.3.6.1.4.1.2011.5.113.1.1.1.5
Indicates the option 60 contents of the DHCP simulation instance. The length is 0-64 bytes. The system considers that this leave is not configured when the length is 0.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..64)

hwDhcpSimulateOption61Type		1.3.6.1.4.1.2011.5.113.1.1.1.6
Indicates the option 61 type of the DHCP simulation instance. The values are 0 and 1. Options: 1. string(0) -Indicates that the option 61 contents are a string. 2. mac(1) -Indicates that the option 61 contents are a hardware address.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

hwDhcpSimulateOption61ClientId		1.3.6.1.4.1.2011.5.113.1.1.1.7
Indicates the option 61 contents of the DHCP simulation instance. The length is 0-64 bytes.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..64)

hwDhcpSimulatePingHost1IPAddress		1.3.6.1.4.1.2011.5.113.1.1.1.8
Indicates the first host IP address to be pinged in the DHCP simulation instance. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity to the host.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

hwDhcpSimulatePingHost2IPAddress		1.3.6.1.4.1.2011.5.113.1.1.1.9
Indicates the second host IP address to be pinged in the DHCP simulation instance. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity to the host.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

hwDhcpSimulatePingHost3IPAddress		1.3.6.1.4.1.2011.5.113.1.1.1.10
Indicates the third host IP address to be pinged in the DHCP simulation instance. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity to the host.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

hwDhcpSimulatePingHost4IPAddress		1.3.6.1.4.1.2011.5.113.1.1.1.11
Indicates the fourth host IP address to be pinged in the DHCP simulation instance. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity to the host.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

hwDhcpSimulatePingHost5IPAddress		1.3.6.1.4.1.2011.5.113.1.1.1.12
Indicates the fifth host IP address to be pinged in the DHCP simulation instance. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity to the host.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

hwDhcpSimulateRowStatus		1.3.6.1.4.1.2011.5.113.1.1.1.13
Indicates the operation type and is mainly used to start or stop the DHCP simulation. During query, if the corresponding simulation instance exists, the result is active. Options: 1. active(1) -indicates the query operation. 2. createAndGo(4) -means to create a DHCP simulation. 3. destroy(6) -means to stop a DHCP simulation.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

hwDhcpSimulateResultTable		1.3.6.1.4.1.2011.5.113.1.2
Indicates the simulation result. During simulation, you can perform the get operation to query the simulation result of the simulation instance. The indexes of this table are hwDhcpSimulateFlowId and hwDhcpSimulateMacAddress.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwDhcpSimulateResultEntry

hwDhcpSimulateResultEntry		1.3.6.1.4.1.2011.5.113.1.2.1
Indicates the simulation result. During simulation, you can perform the get operation to query the simulation result of the simulation instance. The indexes of this entry are hwDhcpSimulateFlowId and hwDhcpSimulateMacAddress.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwDhcpSimulateResultEntry

hwDhcpSimulateStatus		1.3.6.1.4.1.2011.5.113.1.2.1.1
Indicates the simulation status of the current simulation instance. Options: 1. dhcpProcessing(1) -indicates DHCP processing. 2. pingProcessing(2) -indicates ping processing. 3. finished(3) -Indicates that the simulation is finished. 4. unknown(4) -indicates other status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	dhcpProcessing(1), pingProcessing(2), finished(3), unknown(4)

hwDhcpSimulateResult		1.3.6.1.4.1.2011.5.113.1.2.1.2
Indicates the simulation result of the current simulation instance. Options: 1. sendPacketFail(1) -Indicates that the packet fails to be sent. 2. dhcpServerNotFound(2) -Indicates that the DHCP server cannot be found. 3. dhcpServerRejectRequest(3) -Indicates that the DHCP server rejects the request. 4. getIpOvertime(4) -Indicates that the request for IP address is overtime. 5. getIpSuccessful(5) -Indicates that the request for IP address succeeds. 6. allPingSucceed(6) -Indicates that all ping operations succeed. 7. partialPingSucceed(7) -Indicates that parts of ping operations succeed. 8. allPingFail(8) -Indicates that all ping operations fail. 9. systemResourceNotEnough(9) -Indicates that the resource is not enough. 10. unknown(10) -Indicates other results.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	sendPacketFail(1), dhcpServerNotFound(2), dhcpServerRejectRequest(3), getIpOvertime(4), getIpSuccessful(5), allPingSucceed(6), partialPingSucceed(7), allPingFail(8), systemResourceNotEnough(9), unknown(10)

hwDhcpSimulateUserIp		1.3.6.1.4.1.2011.5.113.1.2.1.3
Indicates the simulation user IP address that is obtained in the DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwDhcpSimulateSubNetMask		1.3.6.1.4.1.2011.5.113.1.2.1.4
Indicates the mask of the simulation user IP address that is obtained in the DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwDhcpSimulateDhcpServerIp		1.3.6.1.4.1.2011.5.113.1.2.1.5
Indicates the DHCP server IP address in the DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwDhcpSimulatePrimaryDnsServerIp		1.3.6.1.4.1.2011.5.113.1.2.1.6
Indicates the IP address of the primary DNS server in the DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwDhcpSimulateSecondaryDnsServerIp		1.3.6.1.4.1.2011.5.113.1.2.1.7
Indicates the IP address of the secondary DNS server in the DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwDhcpSimulateGatewayIp		1.3.6.1.4.1.2011.5.113.1.2.1.8
Indicates the IP address of the gateway in the DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwDhcpSimulateDefaultGatewayIp		1.3.6.1.4.1.2011.5.113.1.2.1.9
Indicates the IP address of the default gateway in the DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwDhcpSimulateDest1IpAddr		1.3.6.1.4.1.2011.5.113.1.2.1.10
Indicates the destination IP address of the first route in the DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwDhcpSimulateDest1MaskAddr		1.3.6.1.4.1.2011.5.113.1.2.1.11
Indicates the mask corresponding to the destination IP address of the first route in the DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwDhcpSimulateDest1NextHop		1.3.6.1.4.1.2011.5.113.1.2.1.12
Indicates the next hop IP address of the first route in the DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwDhcpSimulateDest2IpAddr		1.3.6.1.4.1.2011.5.113.1.2.1.13
Indicates the destination IP address of the second route in the DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwDhcpSimulateDest2MaskAddr		1.3.6.1.4.1.2011.5.113.1.2.1.14
Indicates the mask corresponding to the destination IP address of the second route in the DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwDhcpSimulateDest2NextHop		1.3.6.1.4.1.2011.5.113.1.2.1.15
Indicates the next hop IP address of the second route in the DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwDhcpSimulateDest3IpAddr		1.3.6.1.4.1.2011.5.113.1.2.1.16
Indicates the destination IP address of the third route in the DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwDhcpSimulateDest3MaskAddr		1.3.6.1.4.1.2011.5.113.1.2.1.17
Indicates the mask corresponding to the destination IP address of the third route in the DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwDhcpSimulateDest3NextHop		1.3.6.1.4.1.2011.5.113.1.2.1.18
Indicates the next hop IP address of the third route in the DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwDhcpSimulatePingHost1TotalCount		1.3.6.1.4.1.2011.5.113.1.2.1.19
Indicates the total times of pinging the first host IP address in the DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwDhcpSimulatePingHost1OkCount		1.3.6.1.4.1.2011.5.113.1.2.1.20
Indicates the times of successfully pinging the first host IP address in the DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwDhcpSimulatePingHost2TotalCount		1.3.6.1.4.1.2011.5.113.1.2.1.21
Indicates the total times of pinging the second host IP address in the DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwDhcpSimulatePingHost2OkCount		1.3.6.1.4.1.2011.5.113.1.2.1.22
Indicates the times of successfully pinging the second host IP address in the DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwDhcpSimulatePingHost3TotalCount		1.3.6.1.4.1.2011.5.113.1.2.1.23
Indicates the total times of pinging the third host IP address in the DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwDhcpSimulatePingHost3OkCount		1.3.6.1.4.1.2011.5.113.1.2.1.24
Indicates the times of successfully pinging the third host IP address in the DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwDhcpSimulatePingHost4TotalCount		1.3.6.1.4.1.2011.5.113.1.2.1.25
Indicates the total times of pinging the fourth host IP address in the DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwDhcpSimulatePingHost4OkCount		1.3.6.1.4.1.2011.5.113.1.2.1.26
Indicates the times of successfully pinging the fourth host IP address in the DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwDhcpSimulatePingHost5TotalCount		1.3.6.1.4.1.2011.5.113.1.2.1.27
Indicates the total times of pinging the fifth host IP address in the DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwDhcpSimulatePingHost5OkCount		1.3.6.1.4.1.2011.5.113.1.2.1.28
Indicates the times of successfully pinging the fifth host IP address in the DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwDhcpSimulateTftpServer		1.3.6.1.4.1.2011.5.113.1.2.1.29
Indicates the name of the Tftp server in the DHCP simulation instance. The length is 0-256 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

hwDhcpSimulateBootFileName		1.3.6.1.4.1.2011.5.113.1.2.1.30
Indicates the name of the boot file in the DHCP simulation instance. The length is 0-256 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

hwDhcpSimulateTimeServerIp		1.3.6.1.4.1.2011.5.113.1.2.1.31
Indicates the IP address of the time server in the DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwOntDhcpSimulateCfgTable		1.3.6.1.4.1.2011.5.113.2.1
This table is mainly used to configure the ONT DHCP simulation. You can use the set operation to set a leave in the table to start an ONT DHCP simulation instance and simulate an actual user. You can use the get operation to query the existing ONT DHCP simulation instances in the current system. The indexes of this table are hwOntDhcpSimulatePortindex and hwOntDhcpSimulateOntId.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwOntDhcpSimulateCfgEntry

hwOntDhcpSimulateCfgEntry		1.3.6.1.4.1.2011.5.113.2.1.1
This table is mainly used to configure the ONT DHCP simulation. You can use the set operation to set a leave in the table to start an ONT DHCP simulation instance and simulate an actual user. You can use the get operation to query the existing ONT DHCP simulation instances in the current system. The indexes of this entry are hwOntDhcpSimulatePortindex and hwOntDhcpSimulateOntId.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwOntDhcpSimulateCfgEntry

hwOntDhcpSimulatePortindex		1.3.6.1.4.1.2011.5.113.2.1.1.1
Indicates the ptp index corresponding to the user to be simulated in the ONT DHCP simulation instance.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

hwOntDhcpSimulateOntId		1.3.6.1.4.1.2011.5.113.2.1.1.2
Indicates the ONT ID of the user to be simulated in the ONT DHCP simulation instance.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hwOntDhcpSimulateOntPortId		1.3.6.1.4.1.2011.5.113.2.1.1.3
Indicates the ONT port ID. The values are 1-8 and all-Fs. All-Fs indicates that the port is a WAN port and non-all Fs indicates that the port is a user-side port.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

hwOntDhcpSimulateUserVlanTagNumber		1.3.6.1.4.1.2011.5.113.2.1.1.4
Indicates the number of VLAN tags when user packets are sent to the ONT. Range: 0-2. 0 - untag. 1 - simgle tag. 2 - double tag.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

hwOntDhcpSimulateUserOuterVlanId		1.3.6.1.4.1.2011.5.113.2.1.1.5
Indicates the outer VLAN ID of user packets and is used with TagNumber. This parameter can be ignored in the case of untag. It is valid in the case of single-tag or double-tag, and the range is 0-4095. All-Fs indicates invalid and no user input. Range: 0-4095. This leave is used when the number of VLAN tags is 1 or 2.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

hwOntDhcpSimulateUserOuterPriority		1.3.6.1.4.1.2011.5.113.2.1.1.6
Indicates the outer VLAN priority of user packets and is used with TagNumber. This parameter can be ignored in the case of untag. It is valid in the case of single-tag or double-tag, and the range is 0-7. All-Fs indicates invalid and no user input. The default value is 0 in the case of no user input. Range: 0-7.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..7

hwOntDhcpSimulateUserInnerVlanId		1.3.6.1.4.1.2011.5.113.2.1.1.7
Indicates the inner VLAN ID of user packets and is used with TagNumber. This parameter is valid in the case of double-tag, and the range is 0-4095. All-Fs indicates invalid and no user input. Range: 0-4095.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

hwOntDhcpSimulateUserInnerPriority		1.3.6.1.4.1.2011.5.113.2.1.1.8
Indicates the inner VLAN priority of user packets and is used with TagNumber. This parameter is valid in the case of double-tag, and the range is 0-7. All-Fs indicates invalid and no user input. The default value is 0 in the case of no user input.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..7

hwOntDhcpSimulateMacAddress		1.3.6.1.4.1.2011.5.113.2.1.1.9
Indicates the source MAC address used in the simulation.
Status: current	Access: read-write
OBJECT-TYPE
	MacAddress

hwOntDhcpSimulateOption60		1.3.6.1.4.1.2011.5.113.2.1.1.10
Indicates the option 60 contents of the ONT DHCP simulation. Character string type, a string of 0-64 characters.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..64)

hwOntDhcpSimulateOption61Type		1.3.6.1.4.1.2011.5.113.2.1.1.11
Indicates the option 61 type of the ONT DHCP simulation. Values: 0-1. 0 indicates character string type and 1 indicate MAC address type. Options: 1. string(0) -Indicates that the option 61 contents are a string. 2. mac(1) -Indicates that the option 61 contents are a hardware address.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

hwOntDhcpSimulateOption61ClientId		1.3.6.1.4.1.2011.5.113.2.1.1.12
Indicates the option 61 contents of the ONT DHCP simulation. Character string type, a string of 0-64 characters. Optiontype = 0 and null in this field indicate no user input for option 61.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..64)

hwOntDhcpSimulatePingHost1IPAddress		1.3.6.1.4.1.2011.5.113.2.1.1.13
Indicates the first host IP address to be pinged in the ONT DHCP simulation instance. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity to the host.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

hwOntDhcpSimulatePingHost2IPAddress		1.3.6.1.4.1.2011.5.113.2.1.1.14
Indicates the second host IP address to be pinged in the ONT DHCP simulation. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity to the host.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

hwOntDhcpSimulatePingHost3IPAddress		1.3.6.1.4.1.2011.5.113.2.1.1.15
Indicates the third host IP address to be pinged in the ONT DHCP simulation instance. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity to the host.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

hwOntDhcpSimulatePingHost4IPAddress		1.3.6.1.4.1.2011.5.113.2.1.1.16
Indicates the fourth host IP address to be pinged in the ONT DHCP simulation instance. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity to the host.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

hwOntDhcpSimulatePingHost5IPAddress		1.3.6.1.4.1.2011.5.113.2.1.1.17
Indicates the fifth host IP address to be pinged in the ONT DHCP simulation instance. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity to the host.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

hwOntDhcpSimulateRowStatus		1.3.6.1.4.1.2011.5.113.2.1.1.18
Indicates the operation type and is mainly used to start or stop the ONT DHCP simulation. During query, if the corresponding simulation instance exists, the result is active. Options: 1. active(1) -indicates the query operation. 2. createAndGo(4) -means to create a DHCP simulation. 3. destroy(6) -means to stop a DHCP simulation.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

hwOntDhcpSimulateResultTable		1.3.6.1.4.1.2011.5.113.2.2
Indicates the ONT simulation result. During simulation, you can perform the get operation to query the simulation result of the simulation instance. The indexes of this table are hwOntDhcpSimulatePortindex and hwOntDhcpSimulateOntId.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwOntDhcpSimulateResultEntry

hwOntDhcpSimulateResultEntry		1.3.6.1.4.1.2011.5.113.2.2.1
Indicates the ONT simulation result. During simulation, you can perform the get operation to query the simulation result of the simulation instance. The indexes of this entry are hwOntDhcpSimulatePortindex and hwOntDhcpSimulateOntId.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwOntDhcpSimulateResultEntry

hwOntDhcpSimulateStatus		1.3.6.1.4.1.2011.5.113.2.2.1.1
Indicates the simulation status of the current simulation instance. Options: 1. dhcpProcessing(1) -Indicates DHCP processing. 2. pingProcessing(2) -Indicates ping processing. 3. finished(3) -Indicates that the simulation is finished. 4. unknown(4) -Indicates other status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	dhcpProcessing(1), pingProcessing(2), finished(3), unknown(4)

hwOntDhcpSimulateResult		1.3.6.1.4.1.2011.5.113.2.2.1.2
Indicates the simulation result of the current simulation instance. Options: 1. success(1) -Indicates that ont dhcp simulation succeeds. 2. userStop(2) -Indicates that user stopped the ont simulation. 3. deviceNotSupport(3) -Indicates that the device does not support simulation. 4. ethPortNotFound(4) -Indicates that eth port is not found. 5. userMacError(5) -Indicates that user mac is invalid. 6. pingDestIpError(6) -Indicates that the destination ip(s) for ping is(are) invalid. 7. vlanPriParaError(7) -Indicates that the VLAN or priority parameters are invalid. 8. dhcpOptionError(8) -Indicates that dhcp options have some errors. 9. wanNotFound(9) -Indicates that WAN port is not found. 10. wanStateError(10) -Indicates that WAN port is in error state. 11. ethPortStateError(11) -Indicates that eth port is in error state. 12. userVlanError(12) -Indicates that user vlan has some error. 13. devResourceNotEnough(13) -Indicates that the resource for the device is not enough. 14. gemportError(14) -Indicates that gemport has some error. 15. sendPktError(15) -Indicates that the packet fails to be sent. 16. dhcpServerNotFound(16) -Indicates that the DHCP server cannot be found. 17. dhcpServerDeny(17) -Indicates that the DHCP server rejects the request. 18. getIpTimeout(18) -Indicates that the request for IP address is overtime. 19. concurrentSmltForbidden(19) -Indicates that the specified ont does not support concurrent simulations. 20. allPingFail(20) -Indicates that all ping operations fail. 21. partialPingFail(21) -Indicates that that parts of ping operations fail. 22. unknown(22) -Indicates that the result is unknown.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	success(1), userStop(2), deviceNotSupport(3), ethPortNotFound(4), userMacError(5), pingDestIpError(6), vlanPriParaError(7), dhcpOptionError(8), wanNotFound(9), wanStateError(10), ethPortStateError(11), userVlanError(12), devResourceNotEnough(13), gemportError(14), sendPktError(15), dhcpServerNotFound(16), dhcpServerDeny(17), getIpTimeout(18), concurrentSmltForbidden(19), allPingFail(20), partialPingFail(21), unknown(22)

hwOntDhcpSimulateUserIp		1.3.6.1.4.1.2011.5.113.2.2.1.3
Indicates the simulation user IP address that is obtained in the ONT DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwOntDhcpSimulateSubNetMask		1.3.6.1.4.1.2011.5.113.2.2.1.4
Indicates the mask of the simulation user IP address that is obtained in the ONT DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwOntDhcpSimulateDhcpServerIp		1.3.6.1.4.1.2011.5.113.2.2.1.5
Indicates the DHCP server IP address in the ONT DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwOntDhcpSimulatePrimaryDnsServerIp		1.3.6.1.4.1.2011.5.113.2.2.1.6
Indicates the IP address of the primary DNS server in the ONT DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwOntDhcpSimulateSecondaryDnsServerIp		1.3.6.1.4.1.2011.5.113.2.2.1.7
Indicates the IP address of the secondary DNS server in the ONT DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwOntDhcpSimulateGatewayIp		1.3.6.1.4.1.2011.5.113.2.2.1.8
Indicates the IP address of the gateway in the ONT DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwOntDhcpSimulateDefaultGatewayIp		1.3.6.1.4.1.2011.5.113.2.2.1.9
Indicates the IP address of the default gateway in the ONT DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwOntDhcpSimulateDest1IpAddr		1.3.6.1.4.1.2011.5.113.2.2.1.10
Indicates the destination IP address of the first route in the ONT DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwOntDhcpSimulateDest1MaskAddr		1.3.6.1.4.1.2011.5.113.2.2.1.11
Indicates the mask corresponding to the destination IP address of the first route in the ONT DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwOntDhcpSimulateDest1NextHop		1.3.6.1.4.1.2011.5.113.2.2.1.12
Indicates the next hop IP address of the first route in the ONT DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwOntDhcpSimulateDest2IpAddr		1.3.6.1.4.1.2011.5.113.2.2.1.13
Indicates the destination IP address of the second route in the ONT DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwOntDhcpSimulateDest2MaskAddr		1.3.6.1.4.1.2011.5.113.2.2.1.14
Indicates the mask corresponding to the destination IP address of the second route in the ONT DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwOntDhcpSimulateDest2NextHop		1.3.6.1.4.1.2011.5.113.2.2.1.15
Indicates the next hop IP address of the second route in the ONT DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwOntDhcpSimulateDest3IpAddr		1.3.6.1.4.1.2011.5.113.2.2.1.16
Indicates the destination IP address of the third route in the ONT DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwOntDhcpSimulateDest3MaskAddr		1.3.6.1.4.1.2011.5.113.2.2.1.17
Indicates the mask corresponding to the destination IP address of the third route in the ONT DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwOntDhcpSimulateDest3NextHop		1.3.6.1.4.1.2011.5.113.2.2.1.18
Indicates the next hop IP address of the third route in the ONT DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwOntDhcpSimulatePingHost1TotalCount		1.3.6.1.4.1.2011.5.113.2.2.1.19
Indicates the total times of pinging the first host IP address in the ONT DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwOntDhcpSimulatePingHost1OkCount		1.3.6.1.4.1.2011.5.113.2.2.1.20
Indicates the times of successfully pinging the first host IP address in the ONT DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwOntDhcpSimulatePingHost2TotalCount		1.3.6.1.4.1.2011.5.113.2.2.1.21
Indicates the total times of pinging the second host IP address in the ONT DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwOntDhcpSimulatePingHost2OkCount		1.3.6.1.4.1.2011.5.113.2.2.1.22
Indicates the times of successfully pinging the second host IP address in the ONT DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwOntDhcpSimulatePingHost3TotalCount		1.3.6.1.4.1.2011.5.113.2.2.1.23
Indicates the total times of pinging the third host IP address in the ONT DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwOntDhcpSimulatePingHost3OkCount		1.3.6.1.4.1.2011.5.113.2.2.1.24
Indicates the times of successfully pinging the third host IP address in the ONT DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwOntDhcpSimulatePingHost4TotalCount		1.3.6.1.4.1.2011.5.113.2.2.1.25
Indicates the total times of pinging the fourth host IP address in the ONT DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwOntDhcpSimulatePingHost4OkCount		1.3.6.1.4.1.2011.5.113.2.2.1.26
Indicates the times of successfully pinging the fourth host IP address in the ONT DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwOntDhcpSimulatePingHost5TotalCount		1.3.6.1.4.1.2011.5.113.2.2.1.27
Indicates the total times of pinging the fifth host IP address in the ONT DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwOntDhcpSimulatePingHost5OkCount		1.3.6.1.4.1.2011.5.113.2.2.1.28
Indicates the times of successfully pinging the fifth host IP address in the ONT DHCP simulation instance.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwSimulationCommonTraps		1.3.6.1.4.1.2011.5.113.3
OBJECT IDENTIFIER

hwSimulationCommonTrapsPrefix		1.3.6.1.4.1.2011.5.113.3.0
OBJECT IDENTIFIER

hwDhcpSimulateExtStatusTrap		1.3.6.1.4.1.2011.5.113.3.0.1
This item is mainly used to notify the gateway of the simulation status and result when the simulation is finished. It mainly includes four items: flow ID, MAC address, simulation status, and simulation result.
Status: current	Access: read-only
NOTIFICATION-TYPE

hwOntDhcpSimulateExtStatusTrap		1.3.6.1.4.1.2011.5.113.3.0.2
This item is mainly used to notify the gateway of the simulation status and result when the simulation is finished. It mainly includes four items: port ID, ONT ID, simulation status, and simulation result.
Status: current	Access: read-only
NOTIFICATION-TYPE