HUAWEI-GBOND-MIB

File: HUAWEI-GBOND-MIB.mib (66978 bytes)

Imported modules

HUAWEI-MIB	SNMPv2-SMI	SNMPv2-TC
IF-MIB	HUAWEI-DEVICE-MIB

Imported symbols

huaweiUtility	Integer32	Gauge32
Unsigned32	Counter32	OBJECT-TYPE
MODULE-IDENTITY	NOTIFICATION-TYPE	TEXTUAL-CONVENTION
TruthValue	DateAndTime	PhysAddress
RowStatus	InterfaceIndex	ifIndex
hwFrameIndex	hwSlotIndex	hwPortIndex
hwConfigChangeIP

Defined Types

GBondScheme
This textual convention defines ITU-T G.998 bonding scheme values. Options: 1. unknown(0) - undefined or unknown 2. g9981(1) - G.998.1 (G.Bond/ATM) 3. g9982(2) - G.998.2 (G.Bond/Ethernt) 4. g9983(3) - G.998.3 (G.Bond/TDIM)
TEXTUAL-CONVENTION
	INTEGER	unknown(0), g9981(1), g9982(2), g9983(3)

GBondSymbolProtection
This type specifies the minimum impulse noise protection for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 4.3125 kHz. The possible values are: 'noProtection' (i.e., INP not required), 'halfSymbol' (i.e., INP length is 1/2 symbol), and 1-16 symbols in steps of 1 symbol.
TEXTUAL-CONVENTION
	INTEGER	noProtection(1), halfSymbol(2), singleSymbol(3), twoSymbols(4), threeSymbols(5), fourSymbols(6), fiveSymbols(7), sixSymbols(8), sevenSymbols(9), eightSymbols(10), nineSymbols(11), tenSymbols(12), elevenSymbols(13), twelveSymbols(14), thirteeSymbols(15), fourteenSymbols(16), fifteenSymbols(17), sixteenSymbols(18)

HwGBondConfEntry
SEQUENCE
	hwGBondPriPort	InterfaceIndex
	hwGBondAdminScheme	GBondScheme
	hwGBondPeerAdminScheme	GBondScheme
	hwGBondDiscoveryCode	PhysAddress
	hwGBondTargetUpDataRate	Unsigned32
	hwGBondTargetDownDataRate	Unsigned32
	hwGBondThreshLowUpRate	Unsigned32
	hwGBondThreshLowDownRate	Unsigned32
	hwGBondLowRateCrossingEnable	INTEGER
	hwGBondDesc	OCTET STRING
	hwGBondAdminStatus	INTEGER
	hwGBondRowStatus	RowStatus
	hwGBondPrimaryStatus	INTEGER
	hwGBondSecondaryStatus	BITS
	hwGBondGroupCfgProf	OCTET STRING

HwGBondPortStatusEntry
SEQUENCE
	hwGBondUpDataRate	Integer32
	hwGBondDownDataRate	Integer32
	hwGBondNumBCEs	Unsigned32
	hwGBondEthInErrors	Gauge32
	hwGBondEthInSmallFragments	Gauge32
	hwGBondEthInLargeFragments	Gauge32
	hwGBondEthInBadFragments	Gauge32
	hwGBondEthInLostFragments	Gauge32
	hwGBondEthInLostStarts	Gauge32
	hwGBondEthInLostEnds	Gauge32
	hwGBondEthInOverflows	Gauge32
	hwGBondOperScheme	GBondScheme
	hwGBondOperLastUpTime	DateAndTime
	hwGBondOperLastDownTime	DateAndTime
	hwGBondOperReInits	Unsigned32
	hwGBondOperStatus	INTEGER

HwGBondEthPortPerfCurrEntry
SEQUENCE
	hwGBondEthPortPerfCurr15MinStartTime	DateAndTime
	hwGBondEthPortPerf15MinValidIntervals	Gauge32
	hwGBondEthPortPerf15MinInvalidIntervals	Gauge32
	hwGBondEthPortPerfCurr15MinTimeElapsed	Gauge32
	hwGBondEthPortPerfCurr15MinRxErrors	Gauge32
	hwGBondEthPortPerfCurr15MinRxSmallFragments	Gauge32
	hwGBondEthPortPerfCurr15MinRxLargeFragments	Gauge32
	hwGBondEthPortPerfCurr15MinRxBadFragments	Gauge32
	hwGBondEthPortPerfCurr15MinRxLostFragments	Gauge32
	hwGBondEthPortPerfCurr15MinRxLostStarts	Gauge32
	hwGBondEthPortPerfCurr15MinRxLostEnds	Gauge32
	hwGBondEthPortPerfCurr15MinRxOverflows	Gauge32
	hwGBondEthPortPerfCurr1DayStartTime	DateAndTime
	hwGBondEthPortPerf1DayValidIntervals	Gauge32
	hwGBondEthPortPerf1DayInvalidIntervals	Gauge32
	hwGBondEthPortPerfCurr1DayTimeElapsed	Gauge32
	hwGBondEthPortPerfCurr1DayRxErrors	Gauge32
	hwGBondEthPortPerfCurr1DayRxSmallFragments	Gauge32
	hwGBondEthPortPerfCurr1DayRxLargeFragments	Gauge32
	hwGBondEthPortPerfCurr1DayRxBadFragments	Gauge32
	hwGBondEthPortPerfCurr1DayRxLostFragments	Gauge32
	hwGBondEthPortPerfCurr1DayRxLostStarts	Gauge32
	hwGBondEthPortPerfCurr1DayRxLostEnds	Gauge32
	hwGBondEthPortPerfCurr1DayRxOverflows	Gauge32
	hwGBondEthPortPerfRxErrors	Gauge32
	hwGBondEthPortPerfRxSmallFragments	Gauge32
	hwGBondEthPortPerfRxLargeFragments	Gauge32
	hwGBondEthPortPerfRxBadFragments	Gauge32
	hwGBondEthPortPerfRxLostFragments	Gauge32
	hwGBondEthPortPerfRxLostStarts	Gauge32
	hwGBondEthPortPerfRxLostEnds	Gauge32
	hwGBondEthPortPerfRxOverflows	Gauge32

HwGBondGroupProfEntry
SEQUENCE
	hwGBondGroupProfName	OCTET STRING
	hwGBondGroupProfMaxDelayUs	Gauge32
	hwGBondGroupProfMaxDelayDs	Gauge32
	hwGBondGroupProfMinProtectionUs	GBondSymbolProtection
	hwGBondGroupProfMinProtectionDs	GBondSymbolProtection
	hwGBondGroupProfMinDataRateUs	Gauge32
	hwGBondGroupProfMinDataRateDs	Gauge32
	hwGBondGroupProfMaxDataRateUs	Gauge32
	hwGBondGroupProfMaxDataRateDs	Gauge32
	hwGBondGroupProfTargetDataRateUs	Gauge32
	hwGBondGroupProfTargetDataRateDs	Gauge32
	hwGBondGroupProfThreshLowDataRateUs	Gauge32
	hwGBondGroupProfThreshLowDataRateDs	Gauge32
	hwGBondGroupProfLowRateCrossingEnable	INTEGER
	hwGBondGroupProfRowStatus	RowStatus
	hwGBondGroupProfBondCpeIncorrectAlarmSwitch	INTEGER

Defined Values

hwGBond		1.3.6.1.4.1.2011.6.137
This MIB is used for defining Huawei's GBOND management MIB objects, which is defined base on ITU-T G.998.1, G.998.2 and G.998.3.
MODULE-IDENTITY

hwGBondConfTable		1.3.6.1.4.1.2011.6.137.1
Group bonding configuration table. This table is used to describe the configuration, parameters, and running status of the bonding group. The index of this table is hwGBondPriPort.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwGBondConfEntry

hwGBondConfEntry		1.3.6.1.4.1.2011.6.137.1.1
Group bonding configuration table. This table is used to describe the configuration, parameters, and running status of the bonding group. The index of this entry is hwGBondPriPort.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwGBondConfEntry

hwGBondPriPort		1.3.6.1.4.1.2011.6.137.1.1.1
Index of the bonding group, which should be equal to the ifindex of the primary port.
Status: current	Access: not-accessible
OBJECT-TYPE
	InterfaceIndex

hwGBondAdminScheme		1.3.6.1.4.1.2011.6.137.1.1.2
A desired bonding scheme for a bonding group. The port to use corresponding bonding scheme if supported. Options: 1. g9981(1) - Instructs the port to use G.998.1 bonding 2. g9982(2) - Instructs the port to use G.998.2 bonding 3. g9983(3) - Instructs the port to use G.998.3 bonding The hwGBondAdminScheme changes must be performed when the admin status of the bonding group is deactivated.
Status: current	Access: read-write
OBJECT-TYPE
	GBondScheme

hwGBondPeerAdminScheme		1.3.6.1.4.1.2011.6.137.1.1.3
A desired bonding peer scheme for a bonding group. The port to use corresponding bonding scheme if supported. Options: 1. g9981(1) - Instructs the port to use G.998.1 bonding 2. g9982(2) - Instructs the port to use G.998.2 bonding 3. g9983(3) - Instructs the port to use G.998.3 bonding The hwGBondPeerAdminScheme changes must be performed when the admin status of the bonding group is deactivated.
Status: current	Access: read-write
OBJECT-TYPE
	GBondScheme

hwGBondDiscoveryCode		1.3.6.1.4.1.2011.6.137.1.1.4
A discovery Code of the G.Bond port (GBS). A unique 6 octet long code used by the discovery function. This object must be instantiated for the -O subtype GBS before writing operations on the gBondBceRemoteDiscoveryCode (Set_if_Clear and Clear_if_Same) are performed by BCEs associated with the GBS. The initial value of this object for -R subtype ports after reset is all zero. For -R subtype ports, the value of this object cannot be changed directly. This value may be changed as a result of writing operation on the gBondBceRemoteDiscoveryCode object of remote BCE of -O subtype, connected to one of the local BCEs associated with the GBS. Discovery must be performed when the link is down. Attempts to change this object must be rejected (in case of SNMP with the error inconsistent value), if the link is Up or Initializing. This object maps to the TR-159 attribute aGroupDiscoveryCode.
Status: current	Access: read-write
OBJECT-TYPE
	PhysAddress

hwGBondTargetUpDataRate		1.3.6.1.4.1.2011.6.137.1.1.5
A desired bonding group data rate in the upstream direction, in Kbps, to be achieved during initialization, under restrictions placed upon the member ports by their respective configuration settings. This object is deprecated in favour of hwGBondGroupProfTargetDataRateUs.
Status: deprecated	Access: read-write
OBJECT-TYPE
	Unsigned32	1..1000000 \| 9999999

hwGBondTargetDownDataRate		1.3.6.1.4.1.2011.6.137.1.1.6
A desired bonding group data rate in the downstream direction, in Kbps, to be achieved during initialization, under restrictions placed upon the member ports by their respective configuration settings. This object is deprecated in favour of hwGBondGroupProfTargetDataRateDs.
Status: deprecated	Access: read-write
OBJECT-TYPE
	Unsigned32	1..1000000 \| 9999999

hwGBondThreshLowUpRate		1.3.6.1.4.1.2011.6.137.1.1.7
This object configures the bonding group low upstream rate crossing alarm threshold. This object is deprecated in favour of hwGBondGroupProfThreshLowDataRateUs.
Status: deprecated	Access: read-write
OBJECT-TYPE
	Unsigned32	1..1000000

hwGBondThreshLowDownRate		1.3.6.1.4.1.2011.6.137.1.1.8
This object configures the bonding group low downstream rate crossing alarm threshold. This object is deprecated in favour of hwGBondGroupProfThreshLowDataRateDs.
Status: deprecated	Access: read-write
OBJECT-TYPE
	Unsigned32	1..1000000

hwGBondLowRateCrossingEnable		1.3.6.1.4.1.2011.6.137.1.1.9
Indicates whether gBondLowUpRateCrossing and gBondLowDownRateCrossing notifications should be generated for this interface. Options: 1. disable(1) - Indicates that the notifications are disabled 2. enable(2) - Indicates that the notifications are enabled This object is read-write for the -O subtype G.Bond ports and irrelevant for the -R subtypes. This object must be maintained in a persistent manner. This object maps to the TR-159 attribute aGroupLowRateCrossingEnable. This object is deprecated in favour of hwGBondGroupProfLowRateCrossingEnable.
Status: deprecated	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

hwGBondDesc		1.3.6.1.4.1.2011.6.137.1.1.10
The description of the bonding group.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwGBondAdminStatus		1.3.6.1.4.1.2011.6.137.1.1.11
The admin status of the bonding group, when the admin-status is down, no service should be allowed. Options: 1. deactivate(1) - Deactivate status 2. activate(2) - Activate status
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	deactivate(1), activate(2)

hwGBondRowStatus		1.3.6.1.4.1.2011.6.137.1.1.12
This object is used to create a new row or delete an existing row in this table. The bonding group can not be deleted when service configured on this group.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

hwGBondPrimaryStatus		1.3.6.1.4.1.2011.6.137.1.1.13
The primary status of the bonding group. This parameter indicates the current overall service condition of an entity, i.e., whether it is in-service or out-of-service. Options: 1. is-nr(1) - In service, normal 2. is-anr(2) - In service, abnormal 3. is-rst(3) - In service, restricted 4. is-anrst(4) - In service, abnormal & restricted 5. oos-au(5) - Out of service, autonomous 6. oos-ma(6) - Out of service, management 7. oos-auma(7) - Out of service, autonomous & management 8. oos-aurst(8) - Out of service, autonomous & restricted 9. oos-maanr(9) - Out of service, management & abnormal
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	is-nr(1), is-anr(2), is-rst(3), is-anrst(4), oos-au(5), oos-ma(6), oos-auma(7), oos-aurst(8), oos-maanr(9)

hwGBondSecondaryStatus		1.3.6.1.4.1.2011.6.137.1.1.14
This parameter indicates the secondary status of the bonding group. The parameter provides additional information pertaining to PST and PSTQ. For example, it may indicate the type and reason of the external command, the event that occurred in the Network Element, etc. Multiple values may apply to an entity at a given moment. The highest bit of SST value indicates the sst-ains(0) status; the second highest bit of SST value indicates the sst-faf(1) status, and the rest can be deduced by analogy. This BITS structure can report the following status: 1. sst-ains(0) - This bit position positively reports that the status of the board is automatic in-service 2. sst-faf(1) - Facility failure 3. sst-flt(2) - Fault 4. sst-lpbk(3) - Loopback 5. sst-mea(4) - Mismatch of equipment and attributes 6. sst-sgeo(5) - Supporting entity outage 7. sst-stbyh(6) - Standby-hot 8. sst-ts(7) - Test 9. sst-uas(8) - Unassigned 10. sst-ueq(9) - Unequipped 11. sst-wrk(10) - Working 12. sst-pwr(11) - Power
Status: current	Access: read-only
OBJECT-TYPE
	BITS	sst-ains(0), sst-faf(1), sst-flt(2), sst-lpbk(3), sst-mea(4), sst-sgeo(5), sst-stbyh(6), sst-ts(7), sst-uas(8), sst-ueq(9), sst-wrk(10), sst-pwr(11)

hwGBondGroupCfgProf		1.3.6.1.4.1.2011.6.137.1.1.15
This object configures the bonding group profile name.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwGBondPortStatusTable		1.3.6.1.4.1.2011.6.137.2
This table provides overall status information of G.Bond ports, complementing the generic status information from the ifTable of IF-MIB. Additional status information about connected BCEs is available from the relevant line MIBs. This table contains live data from the equipment. As such, it is not persistent. The index of this table is hwGBondPriPort.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwGBondPortStatusEntry

hwGBondPortStatusEntry		1.3.6.1.4.1.2011.6.137.2.1
This table provides overall status information of G.Bond ports, complementing the generic status information from the ifTable of IF-MIB. Additional status information about connected BCEs is available from the relevant line MIBs. This table contains live data from the equipment. As such, it is not persistent. The index of this entry is hwGBondPriPort.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwGBondPortStatusEntry

hwGBondUpDataRate		1.3.6.1.4.1.2011.6.137.2.1.1
A current G.Bond port operational data rate in the upstream direction, in bps. This object represents an estimation of the sum of individual BCE upstream data rates, modified to compensate for fragmentation and encapsulation overhead(e.g., for an ethernet service, the target data rate of 10Mbps shall allow lossless transmission of full-duplex 10Mbps ethernet frame stream with minimal inter-frame gap).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwGBondDownDataRate		1.3.6.1.4.1.2011.6.137.2.1.2
A current G.Bond port operational data rate in the downstream direction, in bps. This object represents an estimation of the sum of individual BCE downstream data rates, modified to compensate for fragmentation and encapsulation overhead (e.g., for an ethernet service, the target data rate of 10Mbps shall allow lossless transmission of full-duplex 10Mbps ethernet frame stream with minimal inter-frame gap).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwGBondNumBCEs		1.3.6.1.4.1.2011.6.137.2.1.3
The Number of BCEs that is currently aggregated by the local GBS (assigned to the G.Bond port using ifStackTable). This number is never greater than gBondCapacity. This object shall be automatically incremented or decremented when a BCE is added or deleted to/from the G.Bond port using ifStackTable. This object maps to the TR-159 attribute aGroupNumChannels.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..32

hwGBondEthInErrors		1.3.6.1.4.1.2011.6.137.2.1.4
The number of error fragments, that have been received across the gamma interface. This object is deprecated in favour of hwGBondEthPortPerfRxErrors.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Gauge32

hwGBondEthInSmallFragments		1.3.6.1.4.1.2011.6.137.2.1.5
The number of fragments smaller than minFragmentSize(64 Bytes), that have been received across the gamma interface and discarded. This object is deprecated in favour of hwGBondEthPortPerfRxSmallFragments.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Gauge32

hwGBondEthInLargeFragments		1.3.6.1.4.1.2011.6.137.2.1.6
The number of fragments larger than minFragmentSize(512 Bytes), that have been received across the gamma interface and discarded. This object is deprecated in favour of hwGBondEthPortPerfRxLargeFragments.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Gauge32

hwGBondEthInBadFragments		1.3.6.1.4.1.2011.6.137.2.1.7
The number of fragments which do not fit into the sequence expected by the frame assembly function, that have been received across the gamma interface and discarded (the frame buffer is flushed to the next valid frame start). This object is deprecated in favour of hwGBondEthPortPerfRxBadFragments.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Gauge32

hwGBondEthInLostFragments		1.3.6.1.4.1.2011.6.137.2.1.8
The number of gaps in the sequence of fragments, which have been received across the gamma interface (the frame buffer is flushed to the next valid frame start, when fragment/fragments expected by the frame assembly function is/are not received). This object is deprecated in favour of hwGBondEthPortPerfRxLostFragments.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Gauge32

hwGBondEthInLostStarts		1.3.6.1.4.1.2011.6.137.2.1.9
The number of missing StartOfPacket indicators expected by the frame assembly function. This object is deprecated in favour of hwGBondEthPortPerfRxLostStarts.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Gauge32

hwGBondEthInLostEnds		1.3.6.1.4.1.2011.6.137.2.1.10
The number of missing EndOfPacket indicators expected by the frame assembly function. This object is deprecated in favour of hwGBondEthPortPerfRxLostEnds.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Gauge32

hwGBondEthInOverflows		1.3.6.1.4.1.2011.6.137.2.1.11
The number of fragments, received across the gamma interface and discarded, which would have caused the frame assembly buffer to overflow. This object is deprecated in favour of hwGBondEthPortPerfRxOverflows.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Gauge32

hwGBondOperScheme		1.3.6.1.4.1.2011.6.137.2.1.12
Current operating bonding scheme of a G.Bond port. Options: 1. g9981(1) - Instructs the port to use G.998.1 bonding 2. g9982(2) - Instructs the port to use G.998.2 bonding 3. g9983(3) - Instructs the port to use G.998.3 bonding
Status: current	Access: read-only
OBJECT-TYPE
	GBondScheme

hwGBondOperLastUpTime		1.3.6.1.4.1.2011.6.137.2.1.13
Bonding group last up time.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

hwGBondOperLastDownTime		1.3.6.1.4.1.2011.6.137.2.1.14
Bonding group last down time.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

hwGBondOperReInits		1.3.6.1.4.1.2011.6.137.2.1.15
Bonding group re-initial counters.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwGBondOperStatus		1.3.6.1.4.1.2011.6.137.2.1.16
The current operational state of the xdsl bonding-group. Options: 1. activated(1) - The value of activated(1) indicates that the operational packets can be passed. 2. activating(2) - The value of activating(2) should be a transient condition before changing to activated, and the operational packets cannot be passed. 3. deactivated(3) - The value of deactivated(3) indicates that the operational packets cannot be passed.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	activated(1), activating(2), deactivated(3)

hwGBondTraps		1.3.6.1.4.1.2011.6.137.3
OBJECT IDENTIFIER

hwGBondTrapsVbOids		1.3.6.1.4.1.2011.6.137.4
OBJECT IDENTIFIER

hwGBondCommonTraps		1.3.6.1.4.1.2011.6.137.3.1
OBJECT IDENTIFIER

hwGBondCommonTrapsPrefix		1.3.6.1.4.1.2011.6.137.3.1.0
OBJECT IDENTIFIER

hwGBondAlarmTraps		1.3.6.1.4.1.2011.6.137.3.2
OBJECT IDENTIFIER

hwGBondAlarmTrapsPrefix		1.3.6.1.4.1.2011.6.137.3.2.0
OBJECT IDENTIFIER

hwGBondBondStateChangeTrap		1.3.6.1.4.1.2011.6.137.3.1.0.1
Bond status change trap. This notification indicates trap when bond status changes.
Status: current	Access: read-only
NOTIFICATION-TYPE

hwGBondBondProfileChangeTrap		1.3.6.1.4.1.2011.6.137.3.1.0.2
Bonding group profile ID change trap. This notification indicates trap when bonding group profile ID changes.
Status: current	Access: read-only
NOTIFICATION-TYPE

hwGBondLowUpRateCrossingAlarmTrap		1.3.6.1.4.1.2011.6.137.3.2.0.1
This notification indicates that the G.Bond port upstream data rate has reached/dropped below or exceeded the low upstream rate threshold.
Status: current	Access: read-only
NOTIFICATION-TYPE

hwGBondLowDownRateCrossingAlarmTrap		1.3.6.1.4.1.2011.6.137.3.2.0.2
This notification indicates that the G.Bond port downstream data rate has reached/dropped below or exceeded the low downstream rate threshold.
Status: current	Access: read-only
NOTIFICATION-TYPE

hwGBondInvalidCpeAlarmTrap		1.3.6.1.4.1.2011.6.137.3.2.0.3
This notification indicates that the G.Bond port connects with a invalid CPE.
Status: current	Access: read-only
NOTIFICATION-TYPE

hwGBondProfileID		1.3.6.1.4.1.2011.6.137.4.1
The bonding group profile ID.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Integer32

hwGBondGroupID		1.3.6.1.4.1.2011.6.137.4.2
The bonding group ID.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Integer32

hwGBondEthPM		1.3.6.1.4.1.2011.6.137.5
OBJECT IDENTIFIER

hwGBondEthPortPerfCurrTable		1.3.6.1.4.1.2011.6.137.5.1
This table contains current performance monitoring information for a G.Bond/Eth port. This table contains live data from the equipment and as such is not persistent. The index of this table is hwGBondPriPort.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwGBondEthPortPerfCurrEntry

hwGBondEthPortPerfCurrEntry		1.3.6.1.4.1.2011.6.137.5.1.1
This table contains current performance monitoring information for a G.Bond/Eth port. This table contains live data from the equipment and as such is not persistent. The index of this entry is hwGBondPriPort.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwGBondEthPortPerfCurrEntry

hwGBondEthPortPerfCurr15MinStartTime		1.3.6.1.4.1.2011.6.137.5.1.1.1
Start time of the current 15-minute statistics performance.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

hwGBondEthPortPerf15MinValidIntervals		1.3.6.1.4.1.2011.6.137.5.1.1.2
A read-only number of 15-minute intervals for which the performance data was collected. The value of this object will be 96 or the maximum number of 15-minute history intervals collected by the implementation unless the measurement was (re-)started recently, in which case the value will be the number of complete 15 minutes intervals for which there are at least some data.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwGBondEthPortPerf15MinInvalidIntervals		1.3.6.1.4.1.2011.6.137.5.1.1.3
A read-only number of 15-minute intervals for which the performance data was not always available. The value will typically be zero except in cases where the data for some intervals are not available.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwGBondEthPortPerfCurr15MinTimeElapsed		1.3.6.1.4.1.2011.6.137.5.1.1.4
A read-only count of seconds that have elapsed since the beginning of the current 15-minute performance interval.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwGBondEthPortPerfCurr15MinRxErrors		1.3.6.1.4.1.2011.6.137.5.1.1.5
A read-only count of errored fragments received and discarded by a G.Bond/Eth port, during the current 15-minute performance interval.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwGBondEthPortPerfCurr15MinRxSmallFragments		1.3.6.1.4.1.2011.6.137.5.1.1.6
A read-only count of fragments smaller than minFragmentSize (64 Bytes), that have been received and discarded by a G.Bond/Eth port, during the current 15-minute performance interval.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwGBondEthPortPerfCurr15MinRxLargeFragments		1.3.6.1.4.1.2011.6.137.5.1.1.7
A read-only count of fragments larger than maxFragmentSize (512 Bytes), that have been received and discarded by a G.Bond/Eth port, during the current 15-minute performance interval.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwGBondEthPortPerfCurr15MinRxBadFragments		1.3.6.1.4.1.2011.6.137.5.1.1.8
A read-only count of fragments which do not fit into the sequence expected by the frame assembly function, that have been received and discarded by a G.Bond/Eth port, during the current 15-minute performance interval.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwGBondEthPortPerfCurr15MinRxLostFragments		1.3.6.1.4.1.2011.6.137.5.1.1.9
A read-only count of gaps in the sequence of fragments, expected by the frame assembly function of a G.Bond/Eth port, during the current 15-minute performance interval.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwGBondEthPortPerfCurr15MinRxLostStarts		1.3.6.1.4.1.2011.6.137.5.1.1.10
A read-only count of missing StartOfPacket indicators expected by the frame assembly function of a G.Bond/Eth port, during the current 15-minute performance interval.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwGBondEthPortPerfCurr15MinRxLostEnds		1.3.6.1.4.1.2011.6.137.5.1.1.11
A read-only count of missing EndOfPacket indicators expected by the frame assembly function of a G.Bond/Eth port, during the current 15-minute performance interval.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwGBondEthPortPerfCurr15MinRxOverflows		1.3.6.1.4.1.2011.6.137.5.1.1.12
A read-only count of fragments that have been received and discarded by a G.Bond/Eth port, which would have caused the frame assembly buffer to overflow, during the current 15-minute performance interval.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwGBondEthPortPerfCurr1DayStartTime		1.3.6.1.4.1.2011.6.137.5.1.1.13
Start time of the current 1-day statistics performance.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

hwGBondEthPortPerf1DayValidIntervals		1.3.6.1.4.1.2011.6.137.5.1.1.14
A read-only number of 1-day intervals for which data was collected. The value of this object will be 7 or the maximum number of 1-day history intervals collected by the implementation unless the measurement was (re-)started recently, in which case the value will be the number of complete 1-day intervals for which there are at least some data. In certain cases it is possible that some intervals are unavailable. In this case, this object reports the maximum interval number for which data is available.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwGBondEthPortPerf1DayInvalidIntervals		1.3.6.1.4.1.2011.6.137.5.1.1.15
A read-only number of 1-day intervals for which data was not always available. The value will typically be zero except in cases where the data for some intervals are not available.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwGBondEthPortPerfCurr1DayTimeElapsed		1.3.6.1.4.1.2011.6.137.5.1.1.16
A read-only count of seconds that have elapsed since the beginning of the current 1-day performance interval.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwGBondEthPortPerfCurr1DayRxErrors		1.3.6.1.4.1.2011.6.137.5.1.1.17
A read-only count of errored fragments received and discarded by a G.Bond/Eth port, during the current 1-day performance interval
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwGBondEthPortPerfCurr1DayRxSmallFragments		1.3.6.1.4.1.2011.6.137.5.1.1.18
A read-only count of fragments smaller than minFragmentSize (64 Bytes), that have been received and discarded by a G.Bond/Eth port, during the current 1-day performance interval.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwGBondEthPortPerfCurr1DayRxLargeFragments		1.3.6.1.4.1.2011.6.137.5.1.1.19
A read-only count of fragments larger than maxFragmentSize (512 Bytes), that have been received and discarded by a G.Bond/Eth port, during the current 1-day performance interval.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwGBondEthPortPerfCurr1DayRxBadFragments		1.3.6.1.4.1.2011.6.137.5.1.1.20
A read-only count of fragments which do not fit into the sequence expected by the frame assembly function, that have been received and discarded by a G.Bond/Eth port, during the current 1-day performance interval.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwGBondEthPortPerfCurr1DayRxLostFragments		1.3.6.1.4.1.2011.6.137.5.1.1.21
A read-only count of gaps in the sequence of fragments, expected by the frame assembly function of a G.Bond/Eth port, during the current 1-day performance interval.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwGBondEthPortPerfCurr1DayRxLostStarts		1.3.6.1.4.1.2011.6.137.5.1.1.22
A read-only count of missing StartOfPacket indicators expected by the frame assembly function of a G.Bond/Eth port, during the current 1-day performance interval.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwGBondEthPortPerfCurr1DayRxLostEnds		1.3.6.1.4.1.2011.6.137.5.1.1.23
A read-only count of missing EndOfPacket indicators expected by the frame assembly function of a G.Bond/Eth port, during the current 1-day performance interval.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwGBondEthPortPerfCurr1DayRxOverflows		1.3.6.1.4.1.2011.6.137.5.1.1.24
A read-only count of fragments that have been received and discarded by a G.Bond/Eth port, which would have caused the frame assembly buffer to overflow, during the current 1-day performance interval.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwGBondEthPortPerfRxErrors		1.3.6.1.4.1.2011.6.137.5.1.1.25
A number of fragments that have been received across the gamma interface and discarded.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwGBondEthPortPerfRxSmallFragments		1.3.6.1.4.1.2011.6.137.5.1.1.26
A number of fragments smaller than minFragmentSize (64 Bytes), that have been received across the gamma interface and discarded.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwGBondEthPortPerfRxLargeFragments		1.3.6.1.4.1.2011.6.137.5.1.1.27
A number of fragments larger than maxFragmentSize (512 Bytes), which have been received across the gamma interface and discarded.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwGBondEthPortPerfRxBadFragments		1.3.6.1.4.1.2011.6.137.5.1.1.28
A number of fragments which do not fit into the sequence expected by the frame assembly function, that have been received across the gamma interface and discarded (the frame buffer is flushed to the next valid frame start)
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwGBondEthPortPerfRxLostFragments		1.3.6.1.4.1.2011.6.137.5.1.1.29
A number of gaps in the sequence of fragments, which have been received across the gamma interface (the frame buffer is flushed to the next valid frame start, when fragment/fragments expected by the frame assembly function is/are not received).
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwGBondEthPortPerfRxLostStarts		1.3.6.1.4.1.2011.6.137.5.1.1.30
A number of missing StartOfPacket indicators expected by the frame assembly function.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwGBondEthPortPerfRxLostEnds		1.3.6.1.4.1.2011.6.137.5.1.1.31
A number of missing EndOfPacket indicators expected by the frame assembly function.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwGBondEthPortPerfRxOverflows		1.3.6.1.4.1.2011.6.137.5.1.1.32
A number of fragments, received across the gamma interface and discarded, which would have caused the frame assembly buffer to overflow.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwGBondGroupProfTable		1.3.6.1.4.1.2011.6.137.6
The table hwGBondGroupProfTable contains the bonding group profile configuration. A default profile with an index of 'DEFVAL' will always exist and its parameters will be set to vendor-specific values, unless otherwise specified in this document. The index of this table is hwGBondGroupProfName.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwGBondGroupProfEntry

hwGBondGroupProfEntry		1.3.6.1.4.1.2011.6.137.6.1
The table hwGBondGroupProfTable contains the bonding group profile configuration. A default profile with an index of 'DEFVAL' will always exist and its parameters will be set to vendor-specific values, unless otherwise specified in this document. The index of this entry is hwGBondGroupProfName.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwGBondGroupProfEntry

hwGBondGroupProfName		1.3.6.1.4.1.2011.6.137.6.1.1
This object identifies a row in this table.
Status: current	Access: not-accessible
OBJECT-TYPE
	OCTET STRING	Size(1..32)

hwGBondGroupProfMaxDelayUs		1.3.6.1.4.1.2011.6.137.6.1.2
This parameter is the maximum one-way interleaving delay introduced by the PMS-TC on upstream direction.
Status: current	Access: read-create
OBJECT-TYPE
	Gauge32	1..63

hwGBondGroupProfMaxDelayDs		1.3.6.1.4.1.2011.6.137.6.1.3
This parameter is the maximum one-way interleaving delay introduced by the PMS-TC on downstream direction.
Status: current	Access: read-create
OBJECT-TYPE
	Gauge32	1..63

hwGBondGroupProfMinProtectionUs		1.3.6.1.4.1.2011.6.137.6.1.4
This parameter is minimum impulse noise protection for the bearer channel in the upstream direction, expressed in symbols. The parameter can take the following values: noProtection (i.e., INP not required), halfSymbol(i.e., INP length is 1/2 symbol) and 1-16 symbols in steps of 1 symbol.
Status: current	Access: read-create
OBJECT-TYPE
	GBondSymbolProtection

hwGBondGroupProfMinProtectionDs		1.3.6.1.4.1.2011.6.137.6.1.5
This parameter is minimum impulse noise protection for the bearer channel in the downstream direction, expressed in symbols. The parameter can take the following values: noProtection (i.e., INP not required), halfSymbol(i.e., INP length is 1/2 symbol) and 1-16 symbols in steps of 1 symbol.
Status: current	Access: read-create
OBJECT-TYPE
	GBondSymbolProtection

hwGBondGroupProfMinDataRateUs		1.3.6.1.4.1.2011.6.137.6.1.6
This parameter specifics minimum data rate for the bearer channel in the upstream direction. The value of 0 means that the minimum upstream data rate is not fixed.
Status: current	Access: read-create
OBJECT-TYPE
	Gauge32	0 \| 64..200000

hwGBondGroupProfMinDataRateDs		1.3.6.1.4.1.2011.6.137.6.1.7
This parameter specifics minimum data rate for the bearer channel in the downstream direction. The value of 0 means that the minimum downstream data rate is not fixed.
Status: current	Access: read-create
OBJECT-TYPE
	Gauge32	0 \| 64..200000

hwGBondGroupProfMaxDataRateUs		1.3.6.1.4.1.2011.6.137.6.1.8
This parameter specifics maximum data rate for the bearer channel in the upstream direction. The value of 0 means that the maximum upstream data rate is not fixed.
Status: current	Access: read-create
OBJECT-TYPE
	Gauge32	0 \| 64..200000

hwGBondGroupProfMaxDataRateDs		1.3.6.1.4.1.2011.6.137.6.1.9
This parameter specifics maximum data rate for the bearer channel in the downstream direction. The value of 0 means that the maximum downstream data rate is not fixed.
Status: current	Access: read-create
OBJECT-TYPE
	Gauge32	0 \| 64..200000

hwGBondGroupProfTargetDataRateUs		1.3.6.1.4.1.2011.6.137.6.1.10
A desired G.Bond port data rate in the upstream direction, in Kbps, to be achieved during initialization, under restrictions placed upon the member BCEs by their respective configuration settings. This object represents a sum of individual BCE upstream data rates, modified to compensate for fragmentation and encapsulation overhead (e.g., for an Ethernet service, the target data rate of 10Mbps shall allow lossless transmission of full-duplex 10Mbps Ethernet frame stream with minimal inter-frame gap). The value between 64 and 200000 indicates that the total upstream data rate of the G.Bond port after initialization SHALL be equal to the target data rate or less, if the target upstream data rate cannot be achieved under the restrictions configured for BCEs. In case the copper environment allows to achieve higher upstream data rate than that specified by this object, the excess capability shall be either converted to additional SNR margin or reclaimed by minimizing transmit power. The value of 0 means that the target data rate is not fixed and SHALL be set to the maximum attainable rate during initialization (Best Effort), under specified spectral restrictions and with desired SNR Margin per BCE.
Status: current	Access: read-create
OBJECT-TYPE
	Gauge32	0 \| 64..200000

hwGBondGroupProfTargetDataRateDs		1.3.6.1.4.1.2011.6.137.6.1.11
A desired G.Bond port data rate in the downstream direction, in Kbps, to be achieved during initialization, under restrictions placed upon the member BCEs by their respective configuration settings. This object represents a sum of individual BCE downstream data rates, modified to compensate for fragmentation and encapsulation overhead (e.g., for an Ethernet service, the target data rate of 10Mbps shall allow lossless transmission of full-duplex 10Mbps Ethernet frame stream with minimal inter-frame gap). The value between 64 and 200000 indicates that the total downstream data rate of the G.Bond port after initialization SHALL be equal to the target data rate or less, if the target downstream data rate cannot be achieved under the restrictions configured for BCEs. In case the copper environment allows to achieve higher downstream data rate than that specified by this object, the excess capability shall be either converted to additional SNR margin or reclaimed by minimizing transmit power. The value of 0 means that the target data rate is not fixed and SHALL be set to the maximum attainable rate during initialization (Best Effort), under specified spectral restrictions and with desired SNR Margin per BCE.
Status: current	Access: read-create
OBJECT-TYPE
	Gauge32	0 \| 64..200000

hwGBondGroupProfThreshLowDataRateUs		1.3.6.1.4.1.2011.6.137.6.1.12
This object configures the G.Bond port low upstream rate crossing alarm threshold. The value of 0 means that the low upstream data rate is not fixed.
Status: current	Access: read-create
OBJECT-TYPE
	Gauge32	0 \| 64..200000

hwGBondGroupProfThreshLowDataRateDs		1.3.6.1.4.1.2011.6.137.6.1.13
This object configures the G.Bond port low downstream rate crossing alarm threshold. The value of 0 means that the low downstream data rate is not fixed.
Status: current	Access: read-create
OBJECT-TYPE
	Gauge32	0 \| 64..200000

hwGBondGroupProfLowRateCrossingEnable		1.3.6.1.4.1.2011.6.137.6.1.14
Indicates whether hwGBondLowUpRateCrossingAlarmTrap and hwGBondLowDownRateCrossingAlarmTrap notifications should be generated for this interface. Options: 1. enable(1) - Indicates that the notifications are enabled 2. disable(2) - Indicates that the notifications are disabled
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwGBondGroupProfRowStatus		1.3.6.1.4.1.2011.6.137.6.1.15
This object is used to create a new row or delete an existing row in this table. Before a profile can be deleted, it must be not referenced from all associated bonding group.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hwGBondGroupProfBondCpeIncorrectAlarmSwitch		1.3.6.1.4.1.2011.6.137.6.1.16
This object enable/disable the bonding CPE incorrect alarm switch. Options: 1. enable(1) - The bonding CPE incorrect alarm switch is enabled 2. disable(2) - The bonding CPE incorrect alarm switch is disabled
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enable(1), disable(2)