HUAWEI-EPONNNI-MIB

File: HUAWEI-EPONNNI-MIB.mib (65699 bytes)

Imported modules

HUAWEI-MIB	SNMPv2-SMI	IF-MIB
HUAWEI-DEVICE-MIB	SNMPv2-TC	SNMP-FRAMEWORK-MIB
HC-PerfHist-TC-MIB	SNMPv2-CONF

Imported symbols

huaweiUtility	MODULE-IDENTITY	OBJECT-TYPE
Unsigned32	NOTIFICATION-TYPE	Integer32
Counter32	Counter64	huaweiMgmt
ifIndex	hwFrameIndex	hwSlotIndex
hwPortIndex	hwConfigChangeIP	TruthValue
RowStatus	MacAddress	SnmpAdminString
HCPerfIntervalThreshold	HCPerfTimeElapsed	MODULE-COMPLIANCE
OBJECT-GROUP	NOTIFICATION-GROUP

Defined Types

HwEponnniCfgEntry
SEQUENCE
	hwEponnniMgntLaserMode	INTEGER
	hwEponnniSubboardReset	INTEGER
	hwEponnniLinkStatus	INTEGER
	hwEponnniRegStatus	INTEGER
	hwEponnniTxSpeed	Unsigned32
	hwEponnniRxSpeed	Unsigned32
	hwEponnniMac	MacAddress
	hwEponnniHardwareVer	OCTET STRING
	hwEponnniFirmwareVer	OCTET STRING
	hwEponnniOamVer	OCTET STRING
	hwEponnniTrafficBroadcast	Integer32
	hwEponnniTrafficMulticast	Integer32
	hwEponnniTrafficUnknowncast	Integer32
	hwEponnniTxPower	Integer32
	hwEponnniRxPower	Integer32
	hwEponnniTemperature	Integer32
	hwEponnniBiasCurrent	Integer32
	hwEponnniVoltage	Integer32
	hwEponnniPassword	OCTET STRING
	hwEponnniOnuRogueOntState	INTEGER
	hwEponnniActiveStatus	INTEGER
	hwEponNniKeyLoid	OCTET STRING
	hwEponNniKeyCheckCode	OCTET STRING
	hwEponnniOpticsModuleType	INTEGER
	hwEponnniOpticsModuleSubType	INTEGER
	hwEponnniOpticsModuleUsedType	INTEGER
	hwEponnniOpticsModuleEncapsulationType	INTEGER

HwEponnniStatisticsEntry
SEQUENCE
	hwEponnniPonTxFramesCnt	Counter32
	hwEponnniPonRxFramesCnt	Counter32
	hwEponnniPonRxFECErrFramesCnt	Counter32
	hwEponnniPonRxHECErrFramesCnt	Counter32
	hwEponnniPonTxPQDropFramesCnt	Counter32
	hwEPonnniUniTxFramesCnt	Counter32
	hwEPonnniUniRxFramesCnt	Counter32
	hwEponnniUniRxFECErrFramesCnt	Counter32
	hwEponnniUniTxPQDropFramesCnt	Counter32
	hwEponnniStatisticsClear	INTEGER
	hwEponnniUniTxOkOctetsCnt	Counter64
	hwEponnniUniRxOkOctetsCnt	Counter64
	hwEponniRxUnicastFrames	Counter32
	hwEponniRxMulticastFrames	Counter32
	hwEponniRxBroadcastFrames	Counter32
	hwEponniRx64BytesFrames	Counter32
	hwEponniRx65to127BytesFrames	Counter32
	hwEponniRx128to255BytesFrames	Counter32
	hwEponniRx256to511BytesFrames	Counter32
	hwEponniRx512to1023BytesFrames	Counter32
	hwEponniRx1024to1518BytesFrames	Counter32
	hwEponniRxOver1518BytesFrames	Counter32
	hwEponniRxUndersizeFrames	Counter32
	hwEponniRxOversizeFrames	Counter32
	hwEponniRxCrcErrorFrames	Counter32
	hwEponniRxDiscardedFrames	Counter32
	hwEponniTxUnicastFrames	Counter32
	hwEponniTxMulticastFrames	Counter32
	hwEponniTxBroadcastFrames	Counter32
	hwEponniTx64BytesFrames	Counter32
	hwEponniTx65to127BytesFrames	Counter32
	hwEponniTx128to255BytesFrames	Counter32
	hwEponniTx256to511BytesFrames	Counter32
	hwEponniTx512to1023BytesFrames	Counter32
	hwEponniTx1024to1518BytesFrames	Counter32
	hwEponniTxOver1518BytesFrames	Counter32
	hwEponnniPonRxErrFramesCnt	Counter32

HwEponNniHistoryStatsEntry
SEQUENCE
	hwEponStatsIntervalType	INTEGER
	hwEponStatsIntervalNum	Integer32
	hwEponStatsRxMPCP	Counter64
	hwEponStatsRxOAMPDU	Counter64
	hwEponStatsRxOctets	Counter64
	hwEponStatsRxPkts	Counter64
	hwEponStatsTxOctets	Counter64
	hwEponStatsTxPkts	Counter64
	hwTimeElapsed	Integer32
	hwValidInterval	TruthValue

HwEponnniAlarmThresholdEntry
SEQUENCE
	hwEponnniRxPowerUpperThreshold	Integer32
	hwEponnniRxPowerLowerThreshold	Integer32
	hwEponnniTxPowerUpperThreshold	Integer32
	hwEponnniTxPowerLowerThreshold	Integer32
	hwEponnniBiasUpperThreshold	Integer32
	hwEponnniBiasLowerThreshold	Integer32
	hwEponnniTemperatureUpperThreshold	Integer32
	hwEponnniTemperatureLowerThreshold	Integer32
	hwEponnniVoltageUpperThreshold	Integer32
	hwEponnniVoltageLowerThreshold	Integer32
	hwEponnniClearThreshold	INTEGER

Defined Values

hwEponMIB		1.3.6.1.4.1.2011.6.119
The MIB is used for defining Huawei's EPON NNI management MIB objects.
MODULE-IDENTITY

hwEponnni		1.3.6.1.4.1.2011.6.119.1
OBJECT IDENTIFIER

hwEponnniTrapsVbOids		1.3.6.1.4.1.2011.6.119.2
OBJECT IDENTIFIER

hwEponnniCommonTraps		1.3.6.1.4.1.2011.6.119.3
OBJECT IDENTIFIER

hwEponnniAlarmTraps		1.3.6.1.4.1.2011.6.119.4
OBJECT IDENTIFIER

hwEponnniCommonTrapsPrefix		1.3.6.1.4.1.2011.6.119.3.0
OBJECT IDENTIFIER

hwEponnniAlarmTrapsPrefix		1.3.6.1.4.1.2011.6.119.4.0
OBJECT IDENTIFIER

hwEponnniNotifications		1.3.6.1.4.1.2011.6.119.1.0
OBJECT IDENTIFIER

hwEponnniCfg		1.3.6.1.4.1.2011.6.119.1.1
OBJECT IDENTIFIER

hwEponnniStatistics		1.3.6.1.4.1.2011.6.119.1.2
OBJECT IDENTIFIER

hwEponNniHistoryStats		1.3.6.1.4.1.2011.6.119.1.3
OBJECT IDENTIFIER

hwEponnniAlarmThreshold		1.3.6.1.4.1.2011.6.119.1.4
OBJECT IDENTIFIER

hwEponnniLOSTrap		1.3.6.1.4.1.2011.6.119.1.0.1
This trap is sent when LOS(Loss of Signal) EPON NNI line happened.
Status: current	Access: read-write
NOTIFICATION-TYPE

hwEponnniUnRegisterTrap		1.3.6.1.4.1.2011.6.119.1.0.2
This trap is sent when unregistered event of EPON NNI happened.
Status: current	Access: read-write
NOTIFICATION-TYPE

hwEponnniCfgTable		1.3.6.1.4.1.2011.6.119.1.1.1
The table Eponnni config the EPON NNI, include manage EPON NNI, EPON NNI status information and inquire chipset. The index of this table is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwEponnniCfgEntry

hwEponnniCfgEntry		1.3.6.1.4.1.2011.6.119.1.1.1.1
The table Eponnni config the EPON NNI, include manage EPON NNI, EPON NNI status information and inquire chipset. The index of this entry is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwEponnniCfgEntry

hwEponnniMgntLaserMode		1.3.6.1.4.1.2011.6.119.1.1.1.1.1
Describes the laser mode, Options: 1. auto(0) - EPON NNI laser auto 2. off(1) - EPON NNI laser off 3. on(2) - EPON NNI laser on
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	auto(0), off(1), on(2)

hwEponnniSubboardReset		1.3.6.1.4.1.2011.6.119.1.1.1.1.2
Reset the sub board of EPON. Options: 1. reset(1) - Reset the sub board
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	reset(1)

hwEponnniLinkStatus		1.3.6.1.4.1.2011.6.119.1.1.1.1.3
Describes the port link status, Options: 1. linkDown(1) - Can't receive optic signal 2. linkUp(2) - Received optic signal
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	linkDown(1), linkUp(2)

hwEponnniRegStatus		1.3.6.1.4.1.2011.6.119.1.1.1.1.4
Describes the port register status, Options: 1. registered(1) - The port is authenticated successfully 2. unregistered(2) - The port fails to be authenticated
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	registered(1), unregistered(2)

hwEponnniTxSpeed		1.3.6.1.4.1.2011.6.119.1.1.1.1.5
The port up stream speed. Unit:Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwEponnniRxSpeed		1.3.6.1.4.1.2011.6.119.1.1.1.1.6
The port down stream speed. Unit:Mbps
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwEponnniMac		1.3.6.1.4.1.2011.6.119.1.1.1.1.7
The MAC address of EPON chipset.
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

hwEponnniHardwareVer		1.3.6.1.4.1.2011.6.119.1.1.1.1.8
The hardware version of EPON chipset.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hwEponnniFirmwareVer		1.3.6.1.4.1.2011.6.119.1.1.1.1.9
The firmware version of EPON chipset.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hwEponnniOamVer		1.3.6.1.4.1.2011.6.119.1.1.1.1.10
The OAM version of EPON chipset.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hwEponnniTrafficBroadcast		1.3.6.1.4.1.2011.6.119.1.1.1.1.11
Traffic Broadcast of Eponnni Port,0 is off, 13 is complete. Traffic suppression ID definition: NO. Min bandwidth(kbps) Max bandwidth(kbps) Package number(pps) 1 6 145 12 2 12 291 24 3 24 582 48 4 48 1153 95 5 97 2319 191 6 195 4639 382 7 390 9265 763 8 781 18531 1526 9 1562 37063 3052 10 3125 74126 6104 11 6249 148241 12207 12 12499 296483 24414 13 0 0 0
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..13

hwEponnniTrafficMulticast		1.3.6.1.4.1.2011.6.119.1.1.1.1.12
Traffic Multicast of Eponnni Port,0 is off, 13 is complete. Traffic suppression ID definition: NO. Min bandwidth(kbps) Max bandwidth(kbps) Package number(pps) 1 6 145 12 2 12 291 24 3 24 582 48 4 48 1153 95 5 97 2319 191 6 195 4639 382 7 390 9265 763 8 781 18531 1526 9 1562 37063 3052 10 3125 74126 6104 11 6249 148241 12207 12 12499 296483 24414 13 0 0 0
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..13

hwEponnniTrafficUnknowncast		1.3.6.1.4.1.2011.6.119.1.1.1.1.13
Traffic unicast of Eponnni Port,0 is off, 13 is complete. Traffic suppression ID definition: NO. Min bandwidth(kbps) Max bandwidth(kbps) Package number(pps) 1 6 145 12 2 12 291 24 3 24 582 48 4 48 1153 95 5 97 2319 191 6 195 4639 382 7 390 9265 763 8 781 18531 1526 9 1562 37063 3052 10 3125 74126 6104 11 6249 148241 12207 12 12499 296483 24414 13 0 0 0
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..13

hwEponnniTxPower		1.3.6.1.4.1.2011.6.119.1.1.1.1.14
The MDU TX power. It ranges from -10000 to 10000 units of 1/100 dBm.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwEponnniRxPower		1.3.6.1.4.1.2011.6.119.1.1.1.1.15
The MDU RX power. It ranges from -10000 to 10000 units of 1/100 dBm.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwEponnniTemperature		1.3.6.1.4.1.2011.6.119.1.1.1.1.16
The MDU Temperature. It ranges from -10000 to 10000 units of 1/100 C.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwEponnniBiasCurrent		1.3.6.1.4.1.2011.6.119.1.1.1.1.17
The MDU Laser Bias Electricity. It ranges from -10000 to 10000 units of 1/100 mA.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwEponnniVoltage		1.3.6.1.4.1.2011.6.119.1.1.1.1.18
The MDU Voltage. It ranges from -10000 to 10000 units of 1/100 mV.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwEponnniPassword		1.3.6.1.4.1.2011.6.119.1.1.1.1.19
The password of the EPON ONU.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwEponnniOnuRogueOntState		1.3.6.1.4.1.2011.6.119.1.1.1.1.20
Indicates whether the optical port is shut down due to the continuous mode(rogue ONT). Options: 1. yes(1) - Port is shut down due to the continuous mode 2. no(2) - Port is not shut down due to the continuous mode
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

hwEponnniActiveStatus		1.3.6.1.4.1.2011.6.119.1.1.1.1.21
Describes the EPONNNI port TYPED protect state. Options: 1. active(1) - Active state 2. standby(2) - Standby state
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), standby(2)

hwEponNniKeyLoid		1.3.6.1.4.1.2011.6.119.1.1.1.1.22
The loid of the EPON ONU.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..24)

hwEponNniKeyCheckCode		1.3.6.1.4.1.2011.6.119.1.1.1.1.23
The checkcode of the EPON ONU.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..12)

hwEponnniOpticsModuleType		1.3.6.1.4.1.2011.6.119.1.1.1.1.24
This object indicates the type of the optical transceiver. Options: 1. unknown(1) - Unknow 2. gpon(2) - GPON 3. epon(3) - EPON 4. epon10g(4) - 10G EPON 5. gpon10g(5) - 10G GPON 6. wdmpon(6) - WDM PON 7. hybridpon(7)- Hybrid PON 8. gponepon(8) - GPON and EPON 9. invalid(-1) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), gpon(2), epon(3), epon10g(4), gpon10g(5), wdmpon(6), hybridpon(7), gponepon(8), invalid(-1)

hwEponnniOpticsModuleSubType		1.3.6.1.4.1.2011.6.119.1.1.1.1.25
This object indicates the sub type of the optical transceiver. Options: 1.unknown(1) - Unknow 2.classbplus(101) - CLASS B+ 3.classcplus(102) - CLASS C+ 4.classb(103) - CLASS B 5.px20(201) - PX20 6.px20plus(202) - PX20+ 7.pr30(301) - PR30 8.pr20(302) - PR20 9.prx30(303) - PRX30 10.prx20(304) - PRX20 11.classbplusandpx20plus(701)- CLASS B+ and PX20+ 12.invalid(-1) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), classbplus(101), classcplus(102), classb(103), px20(201), px20plus(202), pr30(301), pr20(302), prx30(303), prx20(304), classbplusandpx20plus(701), invalid(-1)

hwEponnniOpticsModuleUsedType		1.3.6.1.4.1.2011.6.119.1.1.1.1.26
This object indicates the application scenario of the optical transceiver. Options: 1.unknown(1) - Unknow 2.olt(2) - OLT 3.ont(3) - ONT, This enumeration is obsolete. 4.onu(4) - ONU 5.invalid(-1) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), olt(2), ont(3), onu(4), invalid(-1)

hwEponnniOpticsModuleEncapsulationType		1.3.6.1.4.1.2011.6.119.1.1.1.1.27
This object indicates the encapsulation information about the optical transceiver. Options: 1. unknown(1) - Unknown 2. sff2x5(2) - SFF 2x5 3. sff2x10(3) - SFF 2x10 4. sfp(4) - SFP 5. xfp(5) - XFP 6. lxfp(6) - LXFP 7. bosaonboard(7)- BOSA ON BOARD 8. invalid(-1) - Indicates that the query fails or no information is detected
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), sff2x5(2), sff2x10(3), sfp(4), xfp(5), lxfp(6), bosaonboard(7), invalid(-1)

hwEponnniStatisticsTable		1.3.6.1.4.1.2011.6.119.1.2.1
This table is used to query the statistics of the EPON port. The index of this table is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwEponnniStatisticsEntry

hwEponnniStatisticsEntry		1.3.6.1.4.1.2011.6.119.1.2.1.1
This table is used to query the statistics of the EPON port. The index of this entry is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwEponnniStatisticsEntry

hwEponnniPonTxFramesCnt		1.3.6.1.4.1.2011.6.119.1.2.1.1.1
The PON port send OK frames.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwEponnniPonRxFramesCnt		1.3.6.1.4.1.2011.6.119.1.2.1.1.2
The PON received OK frames.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwEponnniPonRxFECErrFramesCnt		1.3.6.1.4.1.2011.6.119.1.2.1.1.3
The PON received FEC error frames.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwEponnniPonRxHECErrFramesCnt		1.3.6.1.4.1.2011.6.119.1.2.1.1.4
The PON received HEC error frames.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwEponnniPonTxPQDropFramesCnt		1.3.6.1.4.1.2011.6.119.1.2.1.1.5
The PON send PQ drop frames.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwEPonnniUniTxFramesCnt		1.3.6.1.4.1.2011.6.119.1.2.1.1.6
The UNI send OK frames.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwEPonnniUniRxFramesCnt		1.3.6.1.4.1.2011.6.119.1.2.1.1.7
The UNI received OK frames.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwEponnniUniRxFECErrFramesCnt		1.3.6.1.4.1.2011.6.119.1.2.1.1.8
The UNI received FEC error frames.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwEponnniUniTxPQDropFramesCnt		1.3.6.1.4.1.2011.6.119.1.2.1.1.9
The UNI send PQ drop frames.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwEponnniStatisticsClear		1.3.6.1.4.1.2011.6.119.1.2.1.1.10
Clear the statistics of EPON NNI, Options: 1. resetStat(1) - Clear the statistics
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	resetStat(1)

hwEponnniUniTxOkOctetsCnt		1.3.6.1.4.1.2011.6.119.1.2.1.1.11
The UNI send OK Bytes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwEponnniUniRxOkOctetsCnt		1.3.6.1.4.1.2011.6.119.1.2.1.1.12
The UNI received OK Bytes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwEponniRxUnicastFrames		1.3.6.1.4.1.2011.6.119.1.2.1.1.13
The PON received unicast frames.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwEponniRxMulticastFrames		1.3.6.1.4.1.2011.6.119.1.2.1.1.14
The PON received multicast frames.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwEponniRxBroadcastFrames		1.3.6.1.4.1.2011.6.119.1.2.1.1.15
The PON received broadcast frames.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwEponniRx64BytesFrames		1.3.6.1.4.1.2011.6.119.1.2.1.1.16
The PON received frames of 64 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwEponniRx65to127BytesFrames		1.3.6.1.4.1.2011.6.119.1.2.1.1.17
The PON received frames of 65~127 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwEponniRx128to255BytesFrames		1.3.6.1.4.1.2011.6.119.1.2.1.1.18
The PON received frames of 128~255 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwEponniRx256to511BytesFrames		1.3.6.1.4.1.2011.6.119.1.2.1.1.19
The PON received frames of 256~511 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwEponniRx512to1023BytesFrames		1.3.6.1.4.1.2011.6.119.1.2.1.1.20
The PON received frames of 512~1023 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwEponniRx1024to1518BytesFrames		1.3.6.1.4.1.2011.6.119.1.2.1.1.21
The PON received frames of 1024~1518 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwEponniRxOver1518BytesFrames		1.3.6.1.4.1.2011.6.119.1.2.1.1.22
The PON received frames of over 1518 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwEponniRxUndersizeFrames		1.3.6.1.4.1.2011.6.119.1.2.1.1.23
The PON received under size frames.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwEponniRxOversizeFrames		1.3.6.1.4.1.2011.6.119.1.2.1.1.24
The PON received over size frames.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwEponniRxCrcErrorFrames		1.3.6.1.4.1.2011.6.119.1.2.1.1.25
The PON received crc error frames.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwEponniRxDiscardedFrames		1.3.6.1.4.1.2011.6.119.1.2.1.1.26
The PON received discarded frames.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwEponniTxUnicastFrames		1.3.6.1.4.1.2011.6.119.1.2.1.1.27
The PON send unicast frames.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwEponniTxMulticastFrames		1.3.6.1.4.1.2011.6.119.1.2.1.1.28
The PON send multicast frames.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwEponniTxBroadcastFrames		1.3.6.1.4.1.2011.6.119.1.2.1.1.29
The PON send broadcast frames.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwEponniTx64BytesFrames		1.3.6.1.4.1.2011.6.119.1.2.1.1.30
The PON send frames of 64 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwEponniTx65to127BytesFrames		1.3.6.1.4.1.2011.6.119.1.2.1.1.31
The PON send frames of 65~127 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwEponniTx128to255BytesFrames		1.3.6.1.4.1.2011.6.119.1.2.1.1.32
The PON send frames of 128~255 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwEponniTx256to511BytesFrames		1.3.6.1.4.1.2011.6.119.1.2.1.1.33
The PON send frames of 256~511 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwEponniTx512to1023BytesFrames		1.3.6.1.4.1.2011.6.119.1.2.1.1.34
The PON send frames of 512~1023 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwEponniTx1024to1518BytesFrames		1.3.6.1.4.1.2011.6.119.1.2.1.1.35
The PON send frames of 1024~1518 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwEponniTxOver1518BytesFrames		1.3.6.1.4.1.2011.6.119.1.2.1.1.36
The PON send frames of over 1518 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwEponnniPonRxErrFramesCnt		1.3.6.1.4.1.2011.6.119.1.2.1.1.37
The PON received error frames.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwEponNniHistoryStatsTable		1.3.6.1.4.1.2011.6.119.1.3.1
This table provides the performance statistics of the EPON port: current 24-hour performance statistics, history 30 24-hour performance statistics, current 15-minute performance statistics, and history 96 15-minute performance statistics. The indexes of this table are ifIndex, hwEponStatsIntervalType, hwEponStatsIntervalNum.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwEponNniHistoryStatsEntry

hwEponNniHistoryStatsEntry		1.3.6.1.4.1.2011.6.119.1.3.1.1
This table provides the performance statistics of the EPON port: current 24-hour performance statistics, history 30 24-hour performance statistics, current 15-minute performance statistics, and history 96 15-minute performance statistics. The indexes of this entry are ifIndex, hwEponStatsIntervalType, hwEponStatsIntervalNum.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwEponNniHistoryStatsEntry

hwEponStatsIntervalType		1.3.6.1.4.1.2011.6.119.1.3.1.1.1
Describes the type of EponNni History Statistic, Options: 1. intervaltime15min(0) - The EponNNI History Statistic in 15 minutes 2. intervaltime24h(1) - The EponNNI History Statistic in 24 hours 3. everbefore(2) - All the EponNNI History Statistic
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	intervaltime15min(0), intervaltime24h(1), everbefore(2)

hwEponStatsIntervalNum		1.3.6.1.4.1.2011.6.119.1.3.1.1.2
The interval number of EponNni History Statistic. When IntervalType is 15 minutes, IntervalNum is 0 - 96. When IntervalType is 24 hours, IntervalNum is 0 - 30. 0 indicates the statistics in the current interval. The greater the value, the longer the duration. When hwEponStatsIntervalType is everbefore(3), this leaf object is skipped.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..96

hwEponStatsRxMPCP		1.3.6.1.4.1.2011.6.119.1.3.1.1.3
Number of received MPCP frames.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwEponStatsRxOAMPDU		1.3.6.1.4.1.2011.6.119.1.3.1.1.4
Number of received OAMPDU frames.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwEponStatsRxOctets		1.3.6.1.4.1.2011.6.119.1.3.1.1.5
Total number of received octets.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwEponStatsRxPkts		1.3.6.1.4.1.2011.6.119.1.3.1.1.6
Total number of received frames.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwEponStatsTxOctets		1.3.6.1.4.1.2011.6.119.1.3.1.1.7
Total number of transmited octets.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwEponStatsTxPkts		1.3.6.1.4.1.2011.6.119.1.3.1.1.8
Total number of transmited frames.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwTimeElapsed		1.3.6.1.4.1.2011.6.119.1.3.1.1.9
Indicates the data statistic seconds in this period. This leaf object is valid when IntervalNum is 0 (namely, the current 15 minutes and the current 24 hours).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwValidInterval		1.3.6.1.4.1.2011.6.119.1.3.1.1.10
Whether the interval number is valid.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

hwEponnniAlarmThresholdTable		1.3.6.1.4.1.2011.6.119.1.4.1
The table EponNni optical module alarm threshold.This table is used to set and query the low alarm threshold, the high alarm threshold of eponnni. The index of this table is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwEponnniAlarmThresholdEntry

hwEponnniAlarmThresholdEntry		1.3.6.1.4.1.2011.6.119.1.4.1.1
The table EponNni optical module alarm threshold. This table is used to set and query the low alarm threshold, the high alarm threshold of eponnni. The index of this entry is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwEponnniAlarmThresholdEntry

hwEponnniRxPowerUpperThreshold		1.3.6.1.4.1.2011.6.119.1.4.1.1.1
The MDU Rx-power upper limit threshold. It ranges from -9900 to 10000 units of 1/100 dBm.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hwEponnniRxPowerLowerThreshold		1.3.6.1.4.1.2011.6.119.1.4.1.1.2
The MDU Rx-power lower limit threshold. It ranges from -9900 to 10000 units of 1/100 dBm.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hwEponnniTxPowerUpperThreshold		1.3.6.1.4.1.2011.6.119.1.4.1.1.3
The MDU Tx-power upper limit threshold. It ranges from -9900 to 10000 units of 1/100 dBm.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hwEponnniTxPowerLowerThreshold		1.3.6.1.4.1.2011.6.119.1.4.1.1.4
The MDU Tx-power lower limit threshold. It ranges from -9900 to 10000 units of 1/100 dBm.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hwEponnniBiasUpperThreshold		1.3.6.1.4.1.2011.6.119.1.4.1.1.5
The MDU Bias upper limit threshold. It ranges from 0 to 10000 units of mA.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hwEponnniBiasLowerThreshold		1.3.6.1.4.1.2011.6.119.1.4.1.1.6
The MDU Bias lower limit threshold. It ranges from 0 to 10000 units of mA.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hwEponnniTemperatureUpperThreshold		1.3.6.1.4.1.2011.6.119.1.4.1.1.7
The MDU Temperature upper limit threshold. It ranges from -9900 to 30000 units of 1/100 C.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hwEponnniTemperatureLowerThreshold		1.3.6.1.4.1.2011.6.119.1.4.1.1.8
The MDU Temperature lower limit threshold. It ranges from -9900 to 30000 units of 1/100 C.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hwEponnniVoltageUpperThreshold		1.3.6.1.4.1.2011.6.119.1.4.1.1.9
The MDU Voltage upper limit threshold. It ranges from 0 to 10000 units of 1/100 V.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hwEponnniVoltageLowerThreshold		1.3.6.1.4.1.2011.6.119.1.4.1.1.10
The MDU Voltage lower limit threshold. It ranges from 0 to 10000 units of 1/100 V.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hwEponnniClearThreshold		1.3.6.1.4.1.2011.6.119.1.4.1.1.11
Clear the MDU threshold. Options: 1. invalid(0) - The MDU threshold clear state is invalid. 2. clear(1) - Clear the MDU threshold. 3. cleared(32767) - The MDU threshold is cleared.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	invalid(0), clear(1), cleared(32767)

hwEponNNITrapSerialNo		1.3.6.1.4.1.2011.6.119.2.1
Serial No. of EponNNI trap.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Integer32

hwEponNNITrapOperType		1.3.6.1.4.1.2011.6.119.2.2
Operation type of EponNNI trap.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Integer32

hwEponnniTypeDPortSwitchTrap		1.3.6.1.4.1.2011.6.119.3.0.1
TypeD port switch trap. The first ifIndex is the active one after switching over. The second ifIndex is the standby one after switching over. The hwEponnniTypeDPortSwitchTrap will be sent when typeD port switch.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwEponnniAuthChangeTrap		1.3.6.1.4.1.2011.6.119.3.0.2
The hwEponnniAuthChangeTrap will be sent when the authentication information changes.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwEponnniOntRogueOntFailAlarmTrap		1.3.6.1.4.1.2011.6.119.4.0.1
Rogue ONT fail trap. EPON ONU was identified as rogue ONU, because it gave out light in the incorrect time. The notification indicates alarm when optical module has been turn off for service of ONU failed.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwEponnniOntRogueOntRestoreAlarmTrap		1.3.6.1.4.1.2011.6.119.4.0.2
EPON ONU's optical module send laser recovery trap. The notification indicates alarm when EPON ONU's optical module sent laser recovery.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwEponnniTempeExceedThreAlarmTrap		1.3.6.1.4.1.2011.6.119.4.0.3
The temperature of EPON optical module exceeded threshold trap. The notification indicates alarm when the temperature of EPON optical module exceeded alarm threshold.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwEponnniTempeExceedThreRestoreAlarmTrap		1.3.6.1.4.1.2011.6.119.4.0.4
The temperature of EPON optical module exceeded threshold recovery trap. The notification indicates alarm when the temperature of EPON optical module exceeded alarm threshold recovery.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwEponnniVoltExceedThreAlarmTrap		1.3.6.1.4.1.2011.6.119.4.0.5
The voltage of EPON ONU's optical-module exceeded alarm threshold trap. The notification indicates alarm when voltage of EPON ONU's optical-module exceeded alarm threshold.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwEponnniVoltExceedThreRestoreAlarmTrap		1.3.6.1.4.1.2011.6.119.4.0.6
The voltage of EPON ONU's optical-module exceeded alarm threshold recovery trap. The notification indicates alarm when voltage of EPON ONU's optical-module exceeded alarm threshold recovery.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwEponnniBiasExceedThreAlarmTrap		1.3.6.1.4.1.2011.6.119.4.0.7
The bias of EPON ONU's optical module exceeded alarm threshold trap. The notification indicates alarm when the bias of EPON ONU's optical module exceeded alarm threshold.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwEponnniBiasExceedThreRestoreAlarmTrap		1.3.6.1.4.1.2011.6.119.4.0.8
The bias of EPON ONU's optical module exceeded alarm threshold recovery trap. The notification indicates alarm when the bias of EPON ONU's optical module exceeded alarm threshold recovery.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwEponnniTxPowerExceedThreAlarmTrap		1.3.6.1.4.1.2011.6.119.4.0.9
The tx-power of EPON ONU's optical module exceeded alarm threshold trap. The notification indicates alarm when the Tx Power of EPON ONU's optical module exceeded alarm threshold.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwEponnniTxPowerExceedThreRestoreRestoreAlarmTrap		1.3.6.1.4.1.2011.6.119.4.0.10
The tx-power of EPON ONU's optical module exceeded alarm threshold recovery trap. The notification indicates alarm when the tx-power of EPON ONU's optical module exceeded alarm threshold recovery.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwEponnniRxPowerExceedThreAlarmTrap		1.3.6.1.4.1.2011.6.119.4.0.11
The rx-power of EPON ONU's optical-module exceeded alarm threshold trap. The notification indicates alarm when the rx-power of EPON ONU's optical-module exceeded alarm threshold.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwEponnniRxPowerExceedThreRestoreAlarmTrap		1.3.6.1.4.1.2011.6.119.4.0.12
The rx-power of EPON ONU's optical-module exceeded alarm threshold recovery trap. The notification indicates alarm when the rx-power of EPON ONU's optical-module exceeded alarm threshold recovery.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwEponnniPortSwitchAlarmTrap		1.3.6.1.4.1.2011.6.119.4.0.13
Port switch trap. The notification indicates alarm when the protection switchover occurs on the PON port and it has no effect on the service.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE