HUAWEI-ENT-VOICE-SIPAGUSER-MIB

File: HUAWEI-ENT-VOICE-SIPAGUSER-MIB.mib (69931 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-CONF	SNMPv2-TC
HUAWEI-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	NOTIFICATION-TYPE
private	Integer32	Unsigned32
MODULE-COMPLIANCE	OBJECT-GROUP	NOTIFICATION-GROUP
TEXTUAL-CONVENTION	IpAddress	TimeTicks
Counter32	RowStatus	DisplayString
hwDatacomm

Defined Types

HwEntPstnUserConfigEntry
SEQUENCE
	hwEntPstnUserName	DisplayString
	hwEntPstnUserPort	Integer32
	hwEntPstnUserMgId	Integer32
	hwEntPstnUserTelNo	DisplayString
	hwEntPstnUserUserGroupId	Integer32
	hwEntPstnUserRowStatus	RowStatus
	hwEntPstnUserPriority	INTEGER
	hwEntPstnUserPotsLineType	INTEGER
	hwEntPstnUserDCTime	Integer32
	hwEntPstnUserFSKDelayInterval	Integer32
	hwEntPstnUserCidTransSequence	INTEGER
	hwEntPstnUserCidFormat	INTEGER
	hwEntPstnUserVQEAgc	INTEGER
	hwEntPstnUserVQESns	INTEGER
	hwEntPstnUserVQEAgcLevel	Integer32
	hwEntPstnUserVQESnsLevel	Integer32
	hwEntPstnUserDspInputGain	Integer32
	hwEntPstnUserDspOutputGain	Integer32
	hwEntPstnUserDetectANSbarBySingleTone	INTEGER
	hwEntPstnUserBellANS	INTEGER
	hwEntPstnUserDspParaTemplate	DisplayString
	hwEntPstnUserCidFskMode	INTEGER
	hwEntPstnUserCidTasPattern	INTEGER

HwEntPstnUserOperEntry
SEQUENCE
	hwEntPstnUserOperName	DisplayString
	hwEntPstnUserSrvState	INTEGER
	hwEntPstnUserAdminState	INTEGER
	hwEntPstnUserAdminOper	INTEGER
	hwEntPstnUserMaxCobTime	Integer32
	hwEntPstnUserOnexpire	INTEGER

HwEntBraUserConfigEntry
SEQUENCE
	hwEntBraUserName	DisplayString
	hwEntBraUserPort	Integer32
	hwEntBraUserMgId	Integer32
	hwEntBraUserTelNo	DisplayString
	hwEntBraUserUserGroupId	Integer32
	hwEntBraUserRowStatus	RowStatus
	hwEntBraUserPriority	INTEGER
	hwEntBraUserUniErrReport	INTEGER
	hwEntBraUserAutoResumeLimit	Integer32

HwEntBraUserOperEntry
SEQUENCE
	hwEntBraUserOperName	DisplayString
	hwEntBraUserB0SrvState	INTEGER
	hwEntBraUserB1SrvState	INTEGER
	hwEntBraUserB0AdminState	INTEGER
	hwEntBraUserB1AdminState	INTEGER
	hwEntBraUserDState	INTEGER
	hwEntBraUserAdminOper	INTEGER
	hwEntBraUserMaxCobTime	Integer32
	hwEntBraUserOnexpire	INTEGER

HwEntPraUserConfigEntry
SEQUENCE
	hwEntPraUserName	DisplayString
	hwEntPraUserPort	Integer32
	hwEntPraUserMgId	Integer32
	hwEntPraUserTelNo	DisplayString
	hwEntPraUserUserGroupId	Integer32
	hwEntPraUserRowStatus	RowStatus
	hwEntPraUserPriority	INTEGER
	hwEntPraUserUniErrReport	INTEGER
	hwEntPraUserSubChnMask	BITS
	hwEntPraUserAutoResumeLimit	Integer32

HwEntPraUserOperEntry
SEQUENCE
	hwEntPraUserOperName	DisplayString
	hwEntPraUserBchnSrvState	OCTET STRING
	hwEntPraUserBchnAdminState	OCTET STRING
	hwEntPraUserDState	INTEGER
	hwEntPraUserAdminOper	INTEGER
	hwEntPraUserMaxCobTime	Integer32
	hwEntPraUserOnexpire	INTEGER

HwEntUserExtendNumberConfigEntry
SEQUENCE
	hwEntSipagUserName	DisplayString
	hwEntUserExtendNumber	DisplayString
	hwEntUserExtendUserGroupId	Integer32
	hwEntUserExtendRowStatus	RowStatus

HwEntServiceDataConfigEntry
SEQUENCE
	hwEntServiceDataUserName	DisplayString
	hwEntServiceDataTelno	DisplayString
	hwEntServiceDataCentrexNo	Unsigned32
	hwEntServiceDataCentrexPrefix	DisplayString
	hwEntServiceDataCentrexDialMode	INTEGER
	hwEntServiceDataMwiMode	INTEGER
	hwEntServiceDataHotTime	Integer32
	hwEntServiceDataHotLineNum	DisplayString
	hwEntServiceDataDialTone	INTEGER
	hwEntServiceDataCfbNum	DisplayString
	hwEntServiceDataCfnrNum	DisplayString
	hwEntServiceDataCfuNum	DisplayString
	hwEntServiceDataCfnrTime	Integer32
	hwEntServiceDataRowStatus	RowStatus
	hwEntUserAuthAuthName	DisplayString
	hwEntUserAuthAuthPasswordMode	INTEGER
	hwEntUserAuthAuthPassword	DisplayString
	hwEntUserAuthAuthHA1	DisplayString
	hwEntUserRightFlagCallHold	INTEGER
	hwEntUserRightFlagThreeParty	INTEGER
	hwEntUserRightFlagConf	INTEGER
	hwEntUserRightFlagCt	INTEGER
	hwEntUserRightFlagCw	INTEGER
	hwEntUserRightFlagMcid	INTEGER
	hwEntUserRightFlagMwi	INTEGER
	hwEntUserRightFlagTp	INTEGER
	hwEntUserRightFlagCd	INTEGER
	hwEntUserRightFlagAnonymousCall	INTEGER
	hwEntUserRightFlagHotLine	INTEGER
	hwEntUserRightFlagUus1	INTEGER
	hwEntUserRightFlagUus2	INTEGER
	hwEntUserRightFlagUus3	INTEGER

Defined Values

hwEntVoiceSipagUserMIB		1.3.6.1.4.1.2011.5.25.251
This MIB module defines MIB objects which provides voice user management.
MODULE-IDENTITY

hwEntPstnUserConfigTable		1.3.6.1.4.1.2011.5.25.251.1
This table is used to add, delete, modify, and query the PSTN user. The index of this table is hwEntPraUserName.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwEntPstnUserConfigEntry

hwEntPstnUserConfigEntry		1.3.6.1.4.1.2011.5.25.251.1.1
This table is used to add, delete, modify, and query the PSTN user. The index of this entry is hwEntPstnUserName.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwEntPstnUserConfigEntry

hwEntPstnUserName		1.3.6.1.4.1.2011.5.25.251.1.1.1
Indicates the user's name.
Status: current	Access: not-accessible
OBJECT-TYPE
	DisplayString	Size(1..32)

hwEntPstnUserPort		1.3.6.1.4.1.2011.5.25.251.1.1.2
Indicates the user's port. Bits 31-30 (2 bits): reserved. Bits 29-20 (10 bits): slot index. Bits 19-10 (10 bits): subcard index. Bits 9-0 (10 bits): port index.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hwEntPstnUserMgId		1.3.6.1.4.1.2011.5.25.251.1.1.3
Indicates the sipag ID.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..16777215

hwEntPstnUserTelNo		1.3.6.1.4.1.2011.5.25.251.1.1.4
Indicates the user's telephone number.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..32)

hwEntPstnUserUserGroupId		1.3.6.1.4.1.2011.5.25.251.1.1.5
Indicates the user's group id.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..65535

hwEntPstnUserRowStatus		1.3.6.1.4.1.2011.5.25.251.1.1.6
Indicates the row status. Options: active(1) notInService(2) notReady(3) createAndGo(4) createAndWait(5) destroy(6)
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hwEntPstnUserPriority		1.3.6.1.4.1.2011.5.25.251.1.1.7
Indicates the priority of the terminal. Options: cat1(1) -the highest priority cat2(2) -the middle priority cat3(3) -the lowest priority Default: cat3(3)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	cat1(1), cat2(2), cat3(3)

hwEntPstnUserPotsLineType		1.3.6.1.4.1.2011.5.25.251.1.1.8
Indicates the pots line type. Options: del(1) -DEL lcPBX(2) -Loop Calling PBX ecPBX(3) -Earth Calling PBX payPhone(4) -PayPhone Default: del(1)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	del(1), lcPBX(2), ecPBX(3), payPhone(4)

hwEntPstnUserDCTime		1.3.6.1.4.1.2011.5.25.251.1.1.9
Indicates the power-off interval. Default: 10 Unit: 10ms
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..100

hwEntPstnUserFSKDelayInterval		1.3.6.1.4.1.2011.5.25.251.1.1.10
Indicates the FSK delay interval. Default: 80 Unit: 10ms
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..100

hwEntPstnUserCidTransSequence		1.3.6.1.4.1.2011.5.25.251.1.1.11
Indicates the time for delivering the caller ID. Options: afterRing(1) -transmit CID after ringing beforeRing(2) -transmit CID before ringing Default: afterRing(1)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	afterRing(1), beforeRing(2)

hwEntPstnUserCidFormat		1.3.6.1.4.1.2011.5.25.251.1.1.12
Indicates the format of the caller ID. Options: 1. sdmfFsk(1) -SDMF FSK format 2. mdmfFsk(2) -MDMF FSK format 3. dtmf(3) -DTMF format 4. r15(4) -R15 format 5. etsi(5) -ETSI format Default: sdmfFsk(1)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	sdmfFsk(1), mdmfFsk(2), dtmf(3), r15(4), etsi(5)

hwEntPstnUserVQEAgc		1.3.6.1.4.1.2011.5.25.251.1.1.13
Indicates enable AGC or not. Options: enable(1) disable(2) Default: disable(2)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntPstnUserVQESns		1.3.6.1.4.1.2011.5.25.251.1.1.14
Indicates enable SNS or not. Options: 1. enable(1) 2. disable(2) Default: disable(2)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntPstnUserVQEAgcLevel		1.3.6.1.4.1.2011.5.25.251.1.1.15
Indicates set AGC target value. 0..15 corresponding to -9..-24dbm0. Default: 13(-22dbm0)
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..15

hwEntPstnUserVQESnsLevel		1.3.6.1.4.1.2011.5.25.251.1.1.16
Indicates set VQE noise suppression level. Default: 12 Unit: db
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	6..20

hwEntPstnUserDspInputGain		1.3.6.1.4.1.2011.5.25.251.1.1.17
Indicates Dsp input gain. 0..15 corresponding to -10..5db. Default: 10(0db)
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..15

hwEntPstnUserDspOutputGain		1.3.6.1.4.1.2011.5.25.251.1.1.18
Indicates Dsp output gain. 0..20 corresponding to -10..10db. Default: 10(0db)
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..20

hwEntPstnUserDetectANSbarBySingleTone		1.3.6.1.4.1.2011.5.25.251.1.1.19
Indicates the flag of ANSbar signal detected by SingleTone. Options: 1. enable(1) -the ANSbar signal detected by SingleTone is supported 2. disable(2) -the ANSbar signal detected by SingleTone is not supported Default: disable(2)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntPstnUserBellANS		1.3.6.1.4.1.2011.5.25.251.1.1.20
Indicates the flag of Bell ANS. Options: 1. enable(1) -the Bell ANS is supported 2. disable(2) -the Bell ANS is not supported Default: disable(2)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntPstnUserDspParaTemplate		1.3.6.1.4.1.2011.5.25.251.1.1.21
Indicates the index of dsp parameter template name.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..31)

hwEntPstnUserCidFskMode		1.3.6.1.4.1.2011.5.25.251.1.1.22
Indicates the mode of fsk. Options: bell202(1) -bell 202 ccittV23(2) -ccitt v23 ntt(3) -ntt Default: bell202(1)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	bell202(1), ccittV23(2), ntt(3)

hwEntPstnUserCidTasPattern		1.3.6.1.4.1.2011.5.25.251.1.1.23
Indicates the mode of tas. Options: 1. noTas(1) -NO TAS 2. dtAs(2) -DT AS Default: noTas(1)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	noTas(1), dtAs(2)

hwEntPstnUserOperTable		1.3.6.1.4.1.2011.5.25.251.2
This table is used to maintain PSTN users. The index of this entry is hwEntPstnUserOperName.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwEntPstnUserOperEntry

hwEntPstnUserOperEntry		1.3.6.1.4.1.2011.5.25.251.2.1
This table is used to maintain PSTN users. The index of this entry is hwEntPstnUserOperName.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwEntPstnUserOperEntry

hwEntPstnUserOperName		1.3.6.1.4.1.2011.5.25.251.2.1.1
Indicates the user's name.
Status: current	Access: not-accessible
OBJECT-TYPE
	DisplayString	Size(1..32)

hwEntPstnUserSrvState		1.3.6.1.4.1.2011.5.25.251.2.1.2
Indicates the running status. Options: idle(1) busy(2) fault(3) unusable(4) onhook(5) offHookNamal(6) offHookParking(7) ring(8)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	idle(1), busy(2), fault(3), unusable(4), onhook(5), offHookNamal(6), offHookParking(7), ring(8)

hwEntPstnUserAdminState		1.3.6.1.4.1.2011.5.25.251.2.1.3
Indicates the administration status. Options: lBlock(1) -the service is blocked cause of the local reason rBlock(2) -the service is blocked cause of the remote reason startSvc(3) -the service is normal shuttingDown(4) -the service is shutting down graceful delayTest(5) -the user is waiting for testing vsqmTest(6) -the user is in vsqm test
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	lBlock(1), rBlock(2), startSvc(3), shuttingDown(4), delayTest(5), vsqmTest(6)

hwEntPstnUserAdminOper		1.3.6.1.4.1.2011.5.25.251.2.1.4
Indicates the maintenance operation. Options: startService(1) -start service endService(2) -stop service deferEndingService(3) -stop service gracefully
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	startService(1), endService(2), deferEndingService(3)

hwEntPstnUserMaxCobTime		1.3.6.1.4.1.2011.5.25.251.2.1.5
Indicates length of waiting timer for defer end service. Default: 240 Unit: minute
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..1440

hwEntPstnUserOnexpire		1.3.6.1.4.1.2011.5.25.251.2.1.6
Indicates disposal mode when defer end service timeout. Options: force(1) -force user to end service when end-service timeout cancel(2) -cancel end service when end-service timeout Default: force(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	force(1), cancel(2)

hwEntBraUserConfigTable		1.3.6.1.4.1.2011.5.25.251.3
This table is used to add, delete, modify, and query the BRA user. The index of this table is hwEntBraUserName.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwEntBraUserConfigEntry

hwEntBraUserConfigEntry		1.3.6.1.4.1.2011.5.25.251.3.1
This table is used to add, delete, modify, and query the BRA user. The index of this entry is hwEntBraUserName.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwEntBraUserConfigEntry

hwEntBraUserName		1.3.6.1.4.1.2011.5.25.251.3.1.1
Indicates the user's name.
Status: current	Access: not-accessible
OBJECT-TYPE
	DisplayString	Size(1..32)

hwEntBraUserPort		1.3.6.1.4.1.2011.5.25.251.3.1.2
Indicates the user's port. Bits 31-30 (2 bits): reserved. Bits 29-20 (10 bits): slot index. Bits 19-10 (10 bits): subcard index. Bits 9-0 (10 bits): port index.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hwEntBraUserMgId		1.3.6.1.4.1.2011.5.25.251.3.1.3
Indicates the sipag ID.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..16777215

hwEntBraUserTelNo		1.3.6.1.4.1.2011.5.25.251.3.1.4
Indicates the user telephone number.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..32)

hwEntBraUserUserGroupId		1.3.6.1.4.1.2011.5.25.251.3.1.5
Indicates the user's group id.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..65535

hwEntBraUserRowStatus		1.3.6.1.4.1.2011.5.25.251.3.1.6
Indicates the row status. Options: active(1) notInService(2) notReady(3) createAndGo(4) createAndWait(5) destroy(6)
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hwEntBraUserPriority		1.3.6.1.4.1.2011.5.25.251.3.1.7
Indicates the priority of the terminal. Options: cat1(1) -the highest priority cat2(2) -the middle priority cat3(3) -the lowest priority Default: cat3(3)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	cat1(1), cat2(2), cat3(3)

hwEntBraUserUniErrReport		1.3.6.1.4.1.2011.5.25.251.3.1.8
Indicates the flag of UNI fault report. Options: 1. enable(1) 2. disable(2) Default: disable(2)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntBraUserAutoResumeLimit		1.3.6.1.4.1.2011.5.25.251.3.1.9
Indicates the threshold of auto resume times. Default: 20
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..255

hwEntBraUserOperTable		1.3.6.1.4.1.2011.5.25.251.4
This table is used to maintain BRA users. The index of this table is hwEntBraUserOperName.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwEntBraUserOperEntry

hwEntBraUserOperEntry		1.3.6.1.4.1.2011.5.25.251.4.1
This table is used to maintain BRA users. The index of this entry is hwEntBraUserOperName.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwEntBraUserOperEntry

hwEntBraUserOperName		1.3.6.1.4.1.2011.5.25.251.4.1.1
Indicates the user's name.
Status: current	Access: not-accessible
OBJECT-TYPE
	DisplayString	Size(1..32)

hwEntBraUserB0SrvState		1.3.6.1.4.1.2011.5.25.251.4.1.2
Indicates the running status of the BRA B0 channel. Options: idle(1) busy(2) fault(3) unusable(4) onhook(5) offHookNamal(6) offHookParking(7) ring(8)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	idle(1), busy(2), fault(3), unusable(4), onhook(5), offHookNamal(6), offHookParking(7), ring(8)

hwEntBraUserB1SrvState		1.3.6.1.4.1.2011.5.25.251.4.1.3
Indicates the running status of the BRA B1 channel. Options: idle(1) busy(2) fault(3) unusable(4) onhook(5) offHookNamal(6) offHookParking(7) ring(8)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	idle(1), busy(2), fault(3), unusable(4), onhook(5), offHookNamal(6), offHookParking(7), ring(8)

hwEntBraUserB0AdminState		1.3.6.1.4.1.2011.5.25.251.4.1.4
Indicates the administration status of the BRA B0 channel. Options: lBlock(1) -the service is blocked cause of the local reason rBlock(2) -the service is blocked cause of the remote reason startSvc(3) -the service is normal shuttingDown(4) -the service is shutting down graceful delayTest(5) -the user is waiting for testing vsqmTest(6) -the user is in vsqm test
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	lBlock(1), rBlock(2), startSvc(3), shuttingDown(4), delayTest(5), vsqmTest(6)

hwEntBraUserB1AdminState		1.3.6.1.4.1.2011.5.25.251.4.1.5
Indicates the administration status of the BRA B1 channel. Options: lBlock(1) -the service is blocked cause of the local reason rBlock(2) -the service is blocked cause of the remote reason startSvc(3) -the service is normal shuttingDown(4) -the service is shutting down graceful delayTest(5) -the user is waiting for testing vsqmTest(6) -the user is in vsqm test
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	lBlock(1), rBlock(2), startSvc(3), shuttingDown(4), delayTest(5), vsqmTest(6)

hwEntBraUserAdminOper		1.3.6.1.4.1.2011.5.25.251.4.1.6
Indicates the maintenance operation of the BRA port. Options: startService(1) -start service endService(2) -stop service deferEndingService(3) -stop service gracefully
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	startService(1), endService(2), deferEndingService(3)

hwEntBraUserDState		1.3.6.1.4.1.2011.5.25.251.4.1.7
Indicates the status of the BRA D channel. Options: established(1) blocked(2) released(3) teiAssigned(4) teiUnassigned(5)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	established(1), blocked(2), released(3), teiAssigned(4), teiUnassigned(5)

hwEntBraUserMaxCobTime		1.3.6.1.4.1.2011.5.25.251.4.1.8
Indicates the length of waiting timer for defer end service. Default:240 Unit: minute
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..1440

hwEntBraUserOnexpire		1.3.6.1.4.1.2011.5.25.251.4.1.9
Indicates the disposal mode when defer end service timeout. Options: force(1) -force user to end service cancel(2) -cancel user's end service Default: force(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	force(1), cancel(2)

hwEntPraUserConfigTable		1.3.6.1.4.1.2011.5.25.251.5
This table is used to add, delete, modify, and query the PRA user. The index of this table is the hwEntPraUserName.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwEntPraUserConfigEntry

hwEntPraUserConfigEntry		1.3.6.1.4.1.2011.5.25.251.5.1
This table is used to add, delete, modify, and query the PRA user. The index of this entry is the hwEntPraUserName.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwEntPraUserConfigEntry

hwEntPraUserName		1.3.6.1.4.1.2011.5.25.251.5.1.1
Indicates the user's name.
Status: current	Access: not-accessible
OBJECT-TYPE
	DisplayString	Size(1..32)

hwEntPraUserPort		1.3.6.1.4.1.2011.5.25.251.5.1.2
Indicates the user's port. Bits 31-30 (2 bits): reserved. Bits 29-20 (10 bits): slot index. Bits 19-10 (10 bits): subcard index. Bits 9-0 (10 bits): port index.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hwEntPraUserMgId		1.3.6.1.4.1.2011.5.25.251.5.1.3
Indicates the sipag ID.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..16777215

hwEntPraUserTelNo		1.3.6.1.4.1.2011.5.25.251.5.1.4
Indicates the user's telphone number.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..32)

hwEntPraUserUserGroupId		1.3.6.1.4.1.2011.5.25.251.5.1.5
Indicates the user's group id.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..65535

hwEntPraUserRowStatus		1.3.6.1.4.1.2011.5.25.251.5.1.6
Indicates the row status. Options: active(1) notInService(2) notReady(3) createAndGo(4) createAndWait(5) destroy(6)
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hwEntPraUserPriority		1.3.6.1.4.1.2011.5.25.251.5.1.7
Indicates terminal priority. Options: cat1(1) -the highest priority cat2(2) -the middle priority cat3(3) -the lowest priority Default: cat(3)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	cat1(1), cat2(2), cat3(3)

hwEntPraUserUniErrReport		1.3.6.1.4.1.2011.5.25.251.5.1.8
Indicates the flag of UNI fault report. Options: enable(1) -enable UNI fault report of e1 port disable(2) -disable UNI fault report of e1 port Default: disable(2)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntPraUserSubChnMask		1.3.6.1.4.1.2011.5.25.251.5.1.9
Indicates the sub channel mask code. Default: 11111111111111111111111111111111
Status: current	Access: read-create
OBJECT-TYPE
	BITS	bchn0(0), bchn1(1), bchn2(2), bchn3(3), bchn4(4), bchn5(5), bchn6(6), bchn7(7), bchn8(8), bchn9(9), bchn10(10), bchn11(11), bchn12(12), bchn13(13), bchn14(14), bchn15(15), bchn16(16), bchn17(17), bchn18(18), bchn19(19), bchn20(20), bchn21(21), bchn22(22), bchn23(23), bchn24(24), bchn25(25), bchn26(26), bchn27(27), bchn28(28), bchn29(29), bchn30(30), bchn31(31)

hwEntPraUserAutoResumeLimit		1.3.6.1.4.1.2011.5.25.251.5.1.10
Indicates the threshold of auto resume times. Default: 20
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..255

hwEntPraUserOperTable		1.3.6.1.4.1.2011.5.25.251.6
This table is used to maintain PRA users. The index of this table is hwEntPraUserOperNamee.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwEntPraUserOperEntry

hwEntPraUserOperEntry		1.3.6.1.4.1.2011.5.25.251.6.1
This table is used to maintain PRA users. The index of this entry is hwEntPraUserOperName.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwEntPraUserOperEntry

hwEntPraUserOperName		1.3.6.1.4.1.2011.5.25.251.6.1.1
Indicates the user's name.
Status: current	Access: not-accessible
OBJECT-TYPE
	DisplayString	Size(1..32)

hwEntPraUserBchnSrvState		1.3.6.1.4.1.2011.5.25.251.6.1.2
Indicates the running service status of the service layer of the 32 B channels. Each character corresponds to a timeslot. The value of the character is as follows: 1: Idle 2: Busy 3: Faulty 4: Unavailable
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwEntPraUserBchnAdminState		1.3.6.1.4.1.2011.5.25.251.6.1.3
Indicates the administration status of the service layer of the 32 B channels. Each character corresponds to a timeslot. The value of the character is as follows: 1: blocked-locally 2: blocked-remotely 3: in-service 4: shutting-down
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwEntPraUserDState		1.3.6.1.4.1.2011.5.25.251.6.1.4
Indicates the status of the PRA D channel. Options: released(1) established(2) blocked(3) teiAssigned(4) teiUnassigned(5)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	released(1), established(2), blocked(3), teiAssigned(4), teiUnassigned(5)

hwEntPraUserAdminOper		1.3.6.1.4.1.2011.5.25.251.6.1.5
Indicates the service operation. Options: startService(1) -start service endService(2) -stop service deferEndingService(3) -stop service gracefully
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	startService(1), endService(2), deferEndingService(3)

hwEntPraUserMaxCobTime		1.3.6.1.4.1.2011.5.25.251.6.1.6
Indicates length of waiting timer for PRA user defer end service. Default: 240 Unit: minute
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..1440

hwEntPraUserOnexpire		1.3.6.1.4.1.2011.5.25.251.6.1.7
Indicates disposal mode when PRA user defer end service timeout. Options: force(1) -force end service cancel(2) -cancel end service Default: force(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	force(1), cancel(2)

hwEntUserExtendNumberConfigTable		1.3.6.1.4.1.2011.5.25.251.7
This table is used to config extern number of sipag users. The indexes of this table are hwEntSipagUserName, hwEntUserExtendNumber.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwEntUserExtendNumberConfigEntry

hwEntUserExtendNumberConfigEntry		1.3.6.1.4.1.2011.5.25.251.7.1
This table is used to config extern number of the SIP user. The indexes of this entry are hwEntSipagUserName, hwEntUserExtendNumber.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwEntUserExtendNumberConfigEntry

hwEntSipagUserName		1.3.6.1.4.1.2011.5.25.251.7.1.1
Indicates the SipAg user's name.
Status: current	Access: not-accessible
OBJECT-TYPE
	DisplayString	Size(1..32)

hwEntUserExtendNumber		1.3.6.1.4.1.2011.5.25.251.7.1.2
Indicates the extend number.
Status: current	Access: not-accessible
OBJECT-TYPE
	DisplayString	Size(1..32)

hwEntUserExtendUserGroupId		1.3.6.1.4.1.2011.5.25.251.7.1.3
Indicates the user's group id.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..65535

hwEntUserExtendRowStatus		1.3.6.1.4.1.2011.5.25.251.7.1.4
Indicates the RowStatus. Options: active(1) notInService(2) notReady(3) createAndGo(4) createAndWait(5) destroy(6)
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

hwEntServiceDataConfigTable		1.3.6.1.4.1.2011.5.25.251.8
This table is used to config PSTN user's service data. The index of this table is hwEntServiceDataName.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwEntServiceDataConfigEntry

hwEntServiceDataConfigEntry		1.3.6.1.4.1.2011.5.25.251.8.1
This table is used to config PSTN user's service data. The index of this entry is hwEntServiceDataName.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwEntServiceDataConfigEntry

hwEntServiceDataUserName		1.3.6.1.4.1.2011.5.25.251.8.1.1
Indicates the user name of the service data.
Status: current	Access: not-accessible
OBJECT-TYPE
	DisplayString	Size(0..32)

hwEntServiceDataTelno		1.3.6.1.4.1.2011.5.25.251.8.1.2
Indicates the telephone number of the service data.
Status: current	Access: not-accessible
OBJECT-TYPE
	DisplayString	Size(0..32)

hwEntServiceDataCentrexNo		1.3.6.1.4.1.2011.5.25.251.8.1.3
Indicates the centrex number.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..4294967295

hwEntServiceDataCentrexPrefix		1.3.6.1.4.1.2011.5.25.251.8.1.4
Indicates the centrex prefix.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..7)

hwEntServiceDataCentrexDialMode		1.3.6.1.4.1.2011.5.25.251.8.1.5
Indicates the centrex dial mode. Options: 1. directly(1) -dial directly 2. secondary(2) -dial secondary Default: directly(1)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	directly(1), secondary(2)

hwEntServiceDataMwiMode		1.3.6.1.4.1.2011.5.25.251.8.1.6
Indicates the mwi mode. Options: deferred(1) immediate(2) combine(3) Default: deferred(1)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	deferred(1), immediate(2), combine(3)

hwEntServiceDataHotTime		1.3.6.1.4.1.2011.5.25.251.8.1.7
Indicates the hotline time. Default: 5 Unit: second
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..255

hwEntServiceDataHotLineNum		1.3.6.1.4.1.2011.5.25.251.8.1.8
Indicates the hotline number.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..32)

hwEntServiceDataDialTone		1.3.6.1.4.1.2011.5.25.251.8.1.9
Indicates the dial tone. Options: normal(1) -normal tone special(2) -special tone mw(3) -message waiting tone Default: normal(1)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	normal(1), special(2), mw(3)

hwEntServiceDataCfbNum		1.3.6.1.4.1.2011.5.25.251.8.1.10
Indicates the cfb number.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..32)

hwEntServiceDataCfnrNum		1.3.6.1.4.1.2011.5.25.251.8.1.11
Indicates the cfnr number.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..32)

hwEntServiceDataCfuNum		1.3.6.1.4.1.2011.5.25.251.8.1.12
Indicates the cfu number.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..32)

hwEntServiceDataCfnrTime		1.3.6.1.4.1.2011.5.25.251.8.1.13
Indicates the cfnr time. Default: 100 Unit: second
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..65535

hwEntServiceDataRowStatus		1.3.6.1.4.1.2011.5.25.251.8.1.14
Indicates the row status. Options: active(1) notInService(2) notReady(3) createAndGo(4) createAndWait(5) destroy(6)
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hwEntUserAuthAuthName		1.3.6.1.4.1.2011.5.25.251.8.1.15
Indicates the authorization username.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..64)

hwEntUserAuthAuthPasswordMode		1.3.6.1.4.1.2011.5.25.251.8.1.16
Indicates the authorization mode of the password. Options: password(1) -authorized by password ha1(2) -authorized by ha1 Default: password(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	password(1), ha1(2)

hwEntUserAuthAuthPassword		1.3.6.1.4.1.2011.5.25.251.8.1.17
Indicates the authorization password.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..64)

hwEntUserAuthAuthHA1		1.3.6.1.4.1.2011.5.25.251.8.1.18
Indicates the authorization HA1 password.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..32)

hwEntUserRightFlagCallHold		1.3.6.1.4.1.2011.5.25.251.8.1.19
Indicates the right flag of callhold. Options: enable(1) disable(2) Default: enable(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntUserRightFlagThreeParty		1.3.6.1.4.1.2011.5.25.251.8.1.20
Indicates the right flag of Three-party. Options: enable(1) disable(2) Default: enable(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntUserRightFlagConf		1.3.6.1.4.1.2011.5.25.251.8.1.21
Indicates the right flag of Conf. Options: enable(1) disable(2) Default: enable(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntUserRightFlagCt		1.3.6.1.4.1.2011.5.25.251.8.1.22
Indicates the right flag of CT. Options: enable(1) disable(2) Default: enable(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntUserRightFlagCw		1.3.6.1.4.1.2011.5.25.251.8.1.23
Indicates the right flag of CW. Options: enable(1) disable(2) Default: disable(2)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntUserRightFlagMcid		1.3.6.1.4.1.2011.5.25.251.8.1.24
Indicates the right flag of MCID. Options: enable(1) disable(2) Default: disable(2)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntUserRightFlagMwi		1.3.6.1.4.1.2011.5.25.251.8.1.25
Indicates the right flag of MWI. Options: enable(1) disable(2) Default: disable(2)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntUserRightFlagTp		1.3.6.1.4.1.2011.5.25.251.8.1.26
Indicates the right flag of TP. Options: enable(1) disable(2) Default: disable(2)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntUserRightFlagCd		1.3.6.1.4.1.2011.5.25.251.8.1.27
Indicates the right flag of CD. Options: enable(1) disable(2) Default: disable(2)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntUserRightFlagAnonymousCall		1.3.6.1.4.1.2011.5.25.251.8.1.28
Indicates the right flag of anonymous-call. Options: enable(1) disable(2) Default: disable(2)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntUserRightFlagHotLine		1.3.6.1.4.1.2011.5.25.251.8.1.29
Indicates the right flag of hotline. Options: enable(1) disable(2) Default: disable(2)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntUserRightFlagUus1		1.3.6.1.4.1.2011.5.25.251.8.1.30
Indicates the right flag of UUS1. Options: enable(1) disable(2) Default: disable(2)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntUserRightFlagUus2		1.3.6.1.4.1.2011.5.25.251.8.1.31
Indicates the right flag of UUS2. Options: enable(1) disable(2) Default: disable(2)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntUserRightFlagUus3		1.3.6.1.4.1.2011.5.25.251.8.1.32
Indicates the right flag of UUS3. Options: enable(1) disable(2) Default: disable(2)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntVoiceSipagUserConformance		1.3.6.1.4.1.2011.5.25.251.10
OBJECT IDENTIFIER

hwEntVoiceSipagUserCompliances		1.3.6.1.4.1.2011.5.25.251.10.1
OBJECT IDENTIFIER

hwEntVoiceSipagUserCompliance		1.3.6.1.4.1.2011.5.25.251.10.1.1
The compliance statement for systems supporting the this module.
Status: current	Access: read-write
MODULE-COMPLIANCE

hwEntVoiceSipagUserGroups		1.3.6.1.4.1.2011.5.25.251.10.2
OBJECT IDENTIFIER

hwEntPstnUserConfigGroup		1.3.6.1.4.1.2011.5.25.251.10.2.1
The hwEntPstnUserConfig group.
Status: current	Access: read-write
OBJECT-GROUP

hwEntPstnUserOperGroup		1.3.6.1.4.1.2011.5.25.251.10.2.2
The hwEntPstnUserOper group.
Status: current	Access: read-write
OBJECT-GROUP

hwEntBraUserConfigGroup		1.3.6.1.4.1.2011.5.25.251.10.2.3
The hwEntBraUserConfig group.
Status: current	Access: read-write
OBJECT-GROUP

hwEntBraUserOperGroup		1.3.6.1.4.1.2011.5.25.251.10.2.4
The hwEntBraUserOper group.
Status: current	Access: read-write
OBJECT-GROUP

hwEntPraUserConfigGroup		1.3.6.1.4.1.2011.5.25.251.10.2.5
The hwEntPraUserConfig group.
Status: current	Access: read-write
OBJECT-GROUP

hwEntPraUserOperGroup		1.3.6.1.4.1.2011.5.25.251.10.2.6
The hwEntPraUserOper group.
Status: current	Access: read-write
OBJECT-GROUP

hwEntUserExtendNumberConfigGroup		1.3.6.1.4.1.2011.5.25.251.10.2.7
The hwEntUserExtendNumberConfig group.
Status: current	Access: read-write
OBJECT-GROUP

hwEntServiceDataConfigGroup		1.3.6.1.4.1.2011.5.25.251.10.2.8
The hwEntServiceDataConfig group.
Status: current	Access: read-write
OBJECT-GROUP