HUAWEI-ENT-VOICE-SIPAG-MIB

File: HUAWEI-ENT-VOICE-SIPAG-MIB.mib (73632 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-CONF	SNMPv2-TC
HUAWEI-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	NOTIFICATION-TYPE
private	MODULE-COMPLIANCE	OBJECT-GROUP
NOTIFICATION-GROUP	TEXTUAL-CONVENTION	IpAddress
TimeTicks	Counter32	Integer32
Unsigned32	RowStatus	DisplayString
hwDatacomm

Defined Types

HwEntSipAgConfigEntry
SEQUENCE
	hwEntSipAgId	Integer32
	hwEntSipAgMediaIPAddress	IpAddress
	hwEntSipAgSignallingIPAddress	IpAddress
	hwEntSipAgSignallingPort	Integer32
	hwEntSipAgMediaAddrName	DisplayString
	hwEntSipAgSignallingAddrName	DisplayString
	hwEntSipAgTransMode	INTEGER
	hwEntSipAgDomainName	DisplayString
	hwEntSipAgHomeDomainName	DisplayString
	hwEntSipAgRegisterUri	DisplayString
	hwEntSipAgConferenceFactoryUri	DisplayString
	hwEntSipAgDesc	DisplayString
	hwEntSipAgPhoneContext	DisplayString
	hwEntSipAgAdminStatus	INTEGER
	hwEntSipAgRowStatus	RowStatus
	hwEntSipAgProfileIndex	Integer32
	hwEntSipAgProfileName	DisplayString
	hwEntSipAgSrvLogicIndex	Integer32
	hwEntSipAgSrvLogicName	DisplayString
	hwEntSipAgServerDhcpOption	INTEGER
	hwEntSipAgSwitchoverDestination	Integer32
	hwEntSipAgAuthMode	INTEGER
	hwEntSipAgAuthPasswordMode	INTEGER
	hwEntSipAgAuthUserName	DisplayString
	hwEntSipAgAuthPassword	DisplayString
	hwEntSipAgAuthHA1	DisplayString
	hwEntSipAgSubUAProfile	INTEGER
	hwEntSipAgSubRegState	INTEGER
	hwEntSipAgSubMwi	INTEGER
	hwEntSipAgSdpNegoMode	INTEGER
	hwEntSipAgProxyDualHome	INTEGER
	hwEntSipAgProxyDetectMode	INTEGER
	hwEntSipAgProxyRefreshMode	INTEGER

HwEntSipAgRunningEntry
SEQUENCE
	hwEntSipAgRunningId	Integer32
	hwEntSipAgRunningMediaIPAddress	IpAddress
	hwEntSipAgRunningSignallingIPAddress	IpAddress
	hwEntSipAgRunningSignallingPort	Integer32
	hwEntSipAgRunningMediaAddrName	DisplayString
	hwEntSipAgRunningSignallingAddrName	DisplayString
	hwEntSipAgRunningTransMode	INTEGER
	hwEntSipAgRunningDomainName	DisplayString
	hwEntSipAgRunningHomeDomainName	DisplayString
	hwEntSipAgRunningRegisterUri	DisplayString
	hwEntSipAgRunningConferenceFactoryUri	DisplayString
	hwEntSipAgRunningDesc	DisplayString
	hwEntSipAgRunningPhoneContext	DisplayString
	hwEntSipAgRunningProfileIndex	Integer32
	hwEntSipAgRunningProfileName	DisplayString
	hwEntSipAgRunningSrvLogicIndex	Integer32
	hwEntSipAgRunningSrvLogicName	DisplayString
	hwEntSipAgRunningServerDhcpOption	INTEGER
	hwEntSipAgRunningAuthMode	INTEGER
	hwEntSipAgRunningAuthUserName	DisplayString
	hwEntSipAgRunningAuthPasswordMode	INTEGER
	hwEntSipAgRunningAuthPassword	DisplayString
	hwEntSipAgRunningAuthHA1	DisplayString
	hwEntSipAgRunningSubUAProfile	INTEGER
	hwEntSipAgRunningSubRegState	INTEGER
	hwEntSipAgRunningSubMwi	INTEGER
	hwEntSipAgRunningSdpNegoMode	INTEGER
	hwEntSipAgRunningProxyDualHome	INTEGER
	hwEntSipAgRunningProxyDetectMode	INTEGER
	hwEntSipAgRunningProxyRefreshMode	INTEGER
	hwEntSipAgRunningState	INTEGER

HwEntSipAgProxyEntry
SEQUENCE
	hwEntSipAgProxyId	Integer32
	hwSipAgProxyIndex	Integer32
	hwSipAgProxyIPAddress1	IpAddress
	hwSipAgProxyIPAddress2	IpAddress
	hwSipAgProxyPort	Integer32
	hwSipAgProxyDomainName	DisplayString
	hwSipAgProxyAddressMode	INTEGER

HwEntSipAgProxyRunningEntry
SEQUENCE
	hwEntSipAgProxyRunningId	Integer32
	hwSipAgProxyRunningIndex	Integer32
	hwSipAgProxyRunningIPAddress1	IpAddress
	hwSipAgProxyRunningIPAddress2	IpAddress
	hwSipAgProxyRunningPort	Integer32
	hwSipAgProxyRunningDomainName	DisplayString
	hwSipAgProxyRunningAddressMode	INTEGER
	hwSipAgProxyRunningState	INTEGER

HwEntSipProfileEntry
SEQUENCE
	hwEntSipProfileIndex	Integer32
	hwEntSipProfileName	DisplayString

HwEntSipSrvLogicEntry
SEQUENCE
	hwEntSipSrvLogicIndex	Integer32
	hwEntSipSrvLogicName	DisplayString

HwEntSipAgDmmParaEntry
SEQUENCE
	hwEntSipAgDmmParaId	Integer32
	hwEntSipAgDmmParaStartTimer	Integer32
	hwEntSipAgDmmParaShortTimer	Integer32
	hwEntSipAgDmmParaLongTimer	Integer32

HwEntSipAgUserGroupEntry
SEQUENCE
	hwEntSipAgUserGroupSipAgId	Integer32
	hwEntSipAgUserGroupId	Integer32
	hwEntSipAgUserGroupRegisterUriMode	INTEGER
	hwEntSipAgUserGroupUri	DisplayString
	hwEntSipAgUserGroupGrpName	DisplayString
	hwEntSipAgUserGroupAuthUserName	DisplayString
	hwEntSipAgUserGroupAuthPassWordMode	INTEGER
	hwEntSipAgUserGroupAuthPassword	DisplayString
	hwEntSipAgUserGroupAuthHA1	DisplayString
	hwEntSipAgUserGroupPrecinctMode	INTEGER
	hwEntSipAgUserGroupSubUaProfile	INTEGER
	hwEntSipAgUserGroupRowStatus	RowStatus
	hwEntSipAgUserGroupAdminStatus	INTEGER
	hwEntSipAgUserGroupRunningState	INTEGER

HwEntSipAgSoftNumberParaEntry
SEQUENCE
	hwEntSipAgSoftNumberParaId	Integer32
	hwEntSipAgSoftNumberParaNo	Integer32
	hwEntSipAgSoftNumberParaValue	Integer32

HwEntSipAgSoftStringParaEntry
SEQUENCE
	hwEntSipAgSoftStringParaId	Integer32
	hwEntSipAgSoftStringParaNo	Integer32
	hwEntSipAgSoftStringParaValue	DisplayString

HwEntSipAgSoftStringParaRunningEntry
SEQUENCE
	hwEntSipAgSoftStringParaRunningId	Integer32
	hwEntSipAgSoftStringParaRunningNo	Integer32
	hwEntSipAgSoftStringParaRunningValue	DisplayString

HwEntFaxModemParaEntry
SEQUENCE
	hwEntFaxSipAgId	Integer32
	hwEntFaxTransMode	INTEGER
	hwEntModemTransMode	INTEGER
	hwEntFaxModemNegoMode	INTEGER
	hwEntFaxModemParaVbdCodec	INTEGER
	hwEntFaxModemParaVbdPtType	INTEGER
	hwEntFaxModemVbdAttributeType	INTEGER
	hwEntFaxModemRtpInterval	INTEGER

HwEntDtmfParaEntry
SEQUENCE
	hwEntDtmfSipAgId	Integer32
	hwEntDtmfTransMode	INTEGER

HwEntNteEntry
SEQUENCE
	hwEntNteSipAgId	Integer32
	hwEntNteNegoMode	INTEGER
	hwEntNteFaxModem	INTEGER
	hwEntNteFlashHook	INTEGER
	hwEntNteDtmf	INTEGER

HwEntRedundancyEntry
SEQUENCE
	hwEntRedundancySipAgId	Integer32
	hwEntRedundancyNegoMode	INTEGER
	hwEntRedundancyStartMode	INTEGER
	hwEntRedundancyNte	INTEGER
	hwEntRedundancyVbd	INTEGER
	hwEntRedundancyVoice	INTEGER

Defined Values

hwEntVoiceSipagMIB		1.3.6.1.4.1.2011.5.25.250
This mib is used for defining huawei's SIP MIB objects, which provides SIP management.
MODULE-IDENTITY

hwEntSipAgConfigTable		1.3.6.1.4.1.2011.5.25.250.1
This table is used to config the parameters of SipAg. The index of this table is hwEntSipAgId.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwEntSipAgConfigEntry

hwEntSipAgConfigEntry		1.3.6.1.4.1.2011.5.25.250.1.1
This table is used to config the parameters of SipAg. The index of this entry is hwEntSipAgId.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwEntSipAgConfigEntry

hwEntSipAgId		1.3.6.1.4.1.2011.5.25.250.1.1.1
Sipag ID.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..16777215

hwEntSipAgMediaIPAddress		1.3.6.1.4.1.2011.5.25.250.1.1.2
Indicates the media IP address.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

hwEntSipAgSignallingIPAddress		1.3.6.1.4.1.2011.5.25.250.1.1.3
Indicates the signalling IP address.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

hwEntSipAgSignallingPort		1.3.6.1.4.1.2011.5.25.250.1.1.4
Indicates the signalling port.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	5000..5999

hwEntSipAgMediaAddrName		1.3.6.1.4.1.2011.5.25.250.1.1.5
Indicates the dynamic media IP name.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..64)

hwEntSipAgSignallingAddrName		1.3.6.1.4.1.2011.5.25.250.1.1.6
Indicates the dynamic signalliing IP name.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..64)

hwEntSipAgTransMode		1.3.6.1.4.1.2011.5.25.250.1.1.7
Indicates the transfer mode. Options: tcp(1) -TCP udp(2) -UDP sctp(3) -SCTP Default: udp(2)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	tcp(1), udp(2), sctp(3)

hwEntSipAgDomainName		1.3.6.1.4.1.2011.5.25.250.1.1.8
Indicates the domain name of sipag.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..64)

hwEntSipAgHomeDomainName		1.3.6.1.4.1.2011.5.25.250.1.1.9
Indicates the home domain name.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..64)

hwEntSipAgRegisterUri		1.3.6.1.4.1.2011.5.25.250.1.1.10
Indicates the Register-URI.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..64)

hwEntSipAgConferenceFactoryUri		1.3.6.1.4.1.2011.5.25.250.1.1.11
Indicates the ConferenceFactory-URI.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..64)

hwEntSipAgDesc		1.3.6.1.4.1.2011.5.25.250.1.1.12
Indicates the Description.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..32)

hwEntSipAgPhoneContext		1.3.6.1.4.1.2011.5.25.250.1.1.13
Indicates the Phone Context.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..32)

hwEntSipAgRowStatus		1.3.6.1.4.1.2011.5.25.250.1.1.14
This is used to create new rows in this table, modify existing rows, and delete existing rows.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hwEntSipAgAdminStatus		1.3.6.1.4.1.2011.5.25.250.1.1.15
Indicates the AdminStatus. Options: reset(1) -reset switchover(2) -switchover
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	reset(1), switchover(2)

hwEntSipAgSwitchoverDestination		1.3.6.1.4.1.2011.5.25.250.1.1.16
Indicates the target proxy of switchover. Options: 0: primary proxy 1: secondary proxy
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..1

hwEntSipAgProfileIndex		1.3.6.1.4.1.2011.5.25.250.1.1.17
Indicates the ProfileIndex. Default: 1
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..3

hwEntSipAgProfileName		1.3.6.1.4.1.2011.5.25.250.1.1.18
Indicates the ProfileName.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

hwEntSipAgSrvLogicIndex		1.3.6.1.4.1.2011.5.25.250.1.1.19
Indicates the servelogic index. Default: 0
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..9

hwEntSipAgSrvLogicName		1.3.6.1.4.1.2011.5.25.250.1.1.20
Indicates the servelogic name.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

hwEntSipAgServerDhcpOption		1.3.6.1.4.1.2011.5.25.250.1.1.21
Indicates the DHCP option. Options: none(1) -none option120(2) -option120 option21(3) -option21 Default: none(1)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	none(1), option120(2), option21(3)

hwEntSipAgAuthMode		1.3.6.1.4.1.2011.5.25.250.1.1.22
Indicates the user authentication mode. Options: interface(1) -interface user(2) -single user Default: user(2)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	interface(1), user(2)

hwEntSipAgAuthUserName		1.3.6.1.4.1.2011.5.25.250.1.1.23
Indicates the auth username.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..64)

hwEntSipAgAuthPasswordMode		1.3.6.1.4.1.2011.5.25.250.1.1.24
Indicates the auth password mode. Options: password(1) -auth by password ha1(2) -auth by ha1 Default: password(1)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	password(1), ha1(2)

hwEntSipAgAuthPassword		1.3.6.1.4.1.2011.5.25.250.1.1.25
Indicates the auth password.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..64)

hwEntSipAgAuthHA1		1.3.6.1.4.1.2011.5.25.250.1.1.26
Indicates the auth ha1 password.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..32)

hwEntSipAgSubUAProfile		1.3.6.1.4.1.2011.5.25.250.1.1.27
Indicates the flag to subscribe to UA-Profile. Options: enable(1) disable(2) Default: enable(1)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntSipAgSubRegState		1.3.6.1.4.1.2011.5.25.250.1.1.28
Indicates the flag to subscribe to REG-STATE. Options: enable(1) disable(2) Default: disable(2)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntSipAgSubMwi		1.3.6.1.4.1.2011.5.25.250.1.1.29
Indicates the flag to subscribe to MWI. Options: enable(1) disable(2) Default: disable(2)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntSipAgSdpNegoMode		1.3.6.1.4.1.2011.5.25.250.1.1.30
Indicates the SDP negotiation mode. Options: local(1) -Local end takes priority when codec negotiation remote(2) -Remote end takes priority when codec negotiation Default: remote(2)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	local(1), remote(2)

hwEntSipAgProxyDualHome		1.3.6.1.4.1.2011.5.25.250.1.1.31
Indicates the mode of supporting proxy dual-homing. Options: no(1) -not support proxy dual-homing dualhome(2) -support proxy dual-homing, but not support auto switchover autoswitchover(3) -support proxy dual-homing and auto switchover Default: dualhome(2)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	no(1), dualhome(2), autoswitchover(3)

hwEntSipAgProxyDetectMode		1.3.6.1.4.1.2011.5.25.250.1.1.32
Indicate the proxy detection mode. Options: option(1) -detect proxy by option message probe(2) -detect proxy by probe mode register(3) -detect proxy by register message Default: probe(2)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	option(1), probe(2), register(3)

hwEntSipAgProxyRefreshMode		1.3.6.1.4.1.2011.5.25.250.1.1.33
Indicate Proxy address refresh mode. Options: immediate(1) -immediate switch defer(2) -switch in no calls cases no-switch(3) -no switch null(255) -invalid value
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	immediate(1), defer(2), no-switch(3), null(255)

hwEntSipAgRunningTable		1.3.6.1.4.1.2011.5.25.250.2
This table is used to query the running parameters. The index of this table is hwEntSipAgId.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwEntSipAgRunningEntry

hwEntSipAgRunningEntry		1.3.6.1.4.1.2011.5.25.250.2.1
This table is used to query the running parameters. The index of this entry is hwEntSipAgId.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwEntSipAgRunningEntry

hwEntSipAgRunningId		1.3.6.1.4.1.2011.5.25.250.2.1.1
Sipag ID.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..16777215

hwEntSipAgRunningMediaIPAddress		1.3.6.1.4.1.2011.5.25.250.2.1.2
Indicates the media ip address.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwEntSipAgRunningSignallingIPAddress		1.3.6.1.4.1.2011.5.25.250.2.1.3
Indicates the signalling ip address.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwEntSipAgRunningSignallingPort		1.3.6.1.4.1.2011.5.25.250.2.1.4
Indicates the Signalling Port.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	5000..5999

hwEntSipAgRunningMediaAddrName		1.3.6.1.4.1.2011.5.25.250.2.1.5
Indicates the current dynamic media IP name.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

hwEntSipAgRunningSignallingAddrName		1.3.6.1.4.1.2011.5.25.250.2.1.6
Indicates the current dynamic signalling IP name.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

hwEntSipAgRunningTransMode		1.3.6.1.4.1.2011.5.25.250.2.1.7
Indicates the Transfer Mode. null(255) means the interface is not started. Options: tcp(1) -TCP udp(2) -UDP sctp(3) -SCTP null(255) -interface is not started
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	tcp(1), udp(2), sctp(3), null(255)

hwEntSipAgRunningDomainName		1.3.6.1.4.1.2011.5.25.250.2.1.8
Indicates the domain name of sipag.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

hwEntSipAgRunningHomeDomainName		1.3.6.1.4.1.2011.5.25.250.2.1.9
Indicates the home domain name.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

hwEntSipAgRunningRegisterUri		1.3.6.1.4.1.2011.5.25.250.2.1.10
Indicates the register-URI.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

hwEntSipAgRunningConferenceFactoryUri		1.3.6.1.4.1.2011.5.25.250.2.1.11
Indicates the conferencefactory-URI.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

hwEntSipAgRunningDesc		1.3.6.1.4.1.2011.5.25.250.2.1.12
Indicates the description of sipag.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

hwEntSipAgRunningPhoneContext		1.3.6.1.4.1.2011.5.25.250.2.1.13
Indicates the phone context.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

hwEntSipAgRunningProfileIndex		1.3.6.1.4.1.2011.5.25.250.2.1.14
Indicates the profile index.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..3

hwEntSipAgRunningProfileName		1.3.6.1.4.1.2011.5.25.250.2.1.15
Indicates the ProfileName.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

hwEntSipAgRunningSrvLogicIndex		1.3.6.1.4.1.2011.5.25.250.2.1.16
Indicates the servelogic index.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..9

hwEntSipAgRunningSrvLogicName		1.3.6.1.4.1.2011.5.25.250.2.1.17
Indicates the servelogic name.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

hwEntSipAgRunningServerDhcpOption		1.3.6.1.4.1.2011.5.25.250.2.1.18
Indicates the DHCP option. Options: none(1) -none option120(2) -option120 option21(3) -option21
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), option120(2), option21(3)

hwEntSipAgRunningAuthMode		1.3.6.1.4.1.2011.5.25.250.2.1.19
Indicates user authentication mode. Options: interface(1) -interface user(2) -single user
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	interface(1), user(2)

hwEntSipAgRunningAuthUserName		1.3.6.1.4.1.2011.5.25.250.2.1.20
Indicates the auth username.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

hwEntSipAgRunningAuthPasswordMode		1.3.6.1.4.1.2011.5.25.250.2.1.21
Indicates the auth password mode. Options: password(1) -password ha1(2) -HA1
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	password(1), ha1(2)

hwEntSipAgRunningAuthPassword		1.3.6.1.4.1.2011.5.25.250.2.1.22
Indicates the auth password.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

hwEntSipAgRunningAuthHA1		1.3.6.1.4.1.2011.5.25.250.2.1.23
Indicates the auth ha1 password.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

hwEntSipAgRunningSubUAProfile		1.3.6.1.4.1.2011.5.25.250.2.1.24
Indicates the flag to subscribe to UA-Profile. Options: enable(1) disable(2)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntSipAgRunningSubRegState		1.3.6.1.4.1.2011.5.25.250.2.1.25
Indicates the flag to subscribe to REG-STATE. Options: enable(1) disable(2)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntSipAgRunningSubMwi		1.3.6.1.4.1.2011.5.25.250.2.1.26
Indicates the flag to subscribe to MWI. Options: enable(1) disable(2)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntSipAgRunningSdpNegoMode		1.3.6.1.4.1.2011.5.25.250.2.1.27
Indicates the SDP negotiation mode. Options: local(1) -local first remote(2) -remote first
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	local(1), remote(2)

hwEntSipAgRunningProxyDualHome		1.3.6.1.4.1.2011.5.25.250.2.1.28
Indicate the mode of supporting proxy dual-homing. Options: no(1) -not support proxy dual-homing dualhome(2) -support proxy dual-homing, but not support auto switchover autoswitchover(3) -support proxy dual-homing and auto switchover
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), dualhome(2), autoswitchover(3)

hwEntSipAgRunningProxyDetectMode		1.3.6.1.4.1.2011.5.25.250.2.1.29
Indicates the proxy detection mode. Options: option(1) -detection proxy by option message probe(2) -detection proxy by probe mode register(3) -detection proxy by register message
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	option(1), probe(2), register(3)

hwEntSipAgRunningProxyRefreshMode		1.3.6.1.4.1.2011.5.25.250.2.1.30
Indicate Proxy address refresh mode. Options: immediate(1) -immediate switch defer(2) -switch in no calls cases no-switch(3) -no switch
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	immediate(1), defer(2), no-switch(3)

hwEntSipAgRunningState		1.3.6.1.4.1.2011.5.25.250.2.1.31
Indicate the sipag state. Options: notStart(1) fault(2) normal(3)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notStart(1), fault(2), normal(3)

hwEntSipAgProxyTable		1.3.6.1.4.1.2011.5.25.250.3
This table is used to config the parameters of sipag proxy. The indexes of this table are hwEntSipAgId, hwSipAgProxyIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwEntSipAgProxyEntry

hwEntSipAgProxyEntry		1.3.6.1.4.1.2011.5.25.250.3.1
This table is used to config the parameters of sipag proxy. The indexes of this entry are hwEntSipAgId, hwSipAgProxyIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwEntSipAgProxyEntry

hwEntSipAgProxyId		1.3.6.1.4.1.2011.5.25.250.3.1.1
Sipag ID.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..16777215

hwSipAgProxyIndex		1.3.6.1.4.1.2011.5.25.250.3.1.2
proxy index. 0: main 1: standby
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..1

hwSipAgProxyIPAddress1		1.3.6.1.4.1.2011.5.25.250.3.1.3
Indicates the proxy IP address1.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

hwSipAgProxyIPAddress2		1.3.6.1.4.1.2011.5.25.250.3.1.4
Indicates the proxy IP address2.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

hwSipAgProxyPort		1.3.6.1.4.1.2011.5.25.250.3.1.5
Indicates the proxy port.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..65535

hwSipAgProxyDomainName		1.3.6.1.4.1.2011.5.25.250.3.1.6
Indicates the proxy domain name.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..64)

hwSipAgProxyAddressMode		1.3.6.1.4.1.2011.5.25.250.3.1.7
The proxy address mode. ip(1) dnsA(2) dnsSrv(3) dnsNaptr(4)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	ip(1), dnsA(2), dnsSrv(3), dnsNaptr(4)

hwEntSipAgProxyRunningTable		1.3.6.1.4.1.2011.5.25.250.4
This table is used to query the running parameters of sipag proxy. The indexes of this table are hwEntSipAgId, hwSipAgProxyIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwEntSipAgProxyRunningEntry

hwEntSipAgProxyRunningEntry		1.3.6.1.4.1.2011.5.25.250.4.1
This table is used to query the running parameters sipag proxy. The indexes of this entry are hwEntSipAgId, hwSipAgProxyIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwEntSipAgProxyRunningEntry

hwEntSipAgProxyRunningId		1.3.6.1.4.1.2011.5.25.250.4.1.1
Sipag ID.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..16777215

hwSipAgProxyRunningIndex		1.3.6.1.4.1.2011.5.25.250.4.1.2
proxy index. 0: main 1: standby
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..1

hwSipAgProxyRunningIPAddress1		1.3.6.1.4.1.2011.5.25.250.4.1.3
Indicates the proxy IP address1.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwSipAgProxyRunningIPAddress2		1.3.6.1.4.1.2011.5.25.250.4.1.4
Indicates the proxy IP address2.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hwSipAgProxyRunningPort		1.3.6.1.4.1.2011.5.25.250.4.1.5
Indicates the Proxy Port.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..65535

hwSipAgProxyRunningDomainName		1.3.6.1.4.1.2011.5.25.250.4.1.6
Indicates the proxy domain name.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

hwSipAgProxyRunningAddressMode		1.3.6.1.4.1.2011.5.25.250.4.1.7
The proxy address mode. ip(1) dnsA(2) dnsSrv(3) dnsNaptr(4)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	ip(1), dnsA(2), dnsSrv(3), dnsNaptr(4)

hwSipAgProxyRunningState		1.3.6.1.4.1.2011.5.25.250.4.1.8
The proxy state. unknown(1) down(2) up(3)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), down(2), up(3)

hwEntSipProfileTable		1.3.6.1.4.1.2011.5.25.250.5
This table is used to query the sipag profile. The index of this table is hwEntSipProfileIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwEntSipProfileEntry

hwEntSipProfileEntry		1.3.6.1.4.1.2011.5.25.250.5.1
This table is used to config the Sip Profile. The index of this entry is hwEntSipProfileIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwEntSipProfileEntry

hwEntSipProfileIndex		1.3.6.1.4.1.2011.5.25.250.5.1.1
Indicates the index of sipprofile.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..3

hwEntSipProfileName		1.3.6.1.4.1.2011.5.25.250.5.1.2
Indicates the name of sipprofile.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

hwEntSipSrvLogicTable		1.3.6.1.4.1.2011.5.25.250.6
This table is used to config the Sip Serve-Logic list. The index of this table is hwEntSipSrvLogicIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwEntSipSrvLogicEntry

hwEntSipSrvLogicEntry		1.3.6.1.4.1.2011.5.25.250.6.1
This table is used to config the sip serve-logic list. The index of this entry is hwEntSipSrvLogicIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwEntSipSrvLogicEntry

hwEntSipSrvLogicIndex		1.3.6.1.4.1.2011.5.25.250.6.1.1
Indicates the index of serve-logic.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..9

hwEntSipSrvLogicName		1.3.6.1.4.1.2011.5.25.250.6.1.2
Indicates the name of serve-logic.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

hwEntSipAgDmmParaTable		1.3.6.1.4.1.2011.5.25.250.7
This table is used to config the digitmap. The index of this table is hwEntSipAgId.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwEntSipAgDmmParaEntry

hwEntSipAgDmmParaEntry		1.3.6.1.4.1.2011.5.25.250.7.1
This table is used to config the digitmap. The index of this entry is hwEntSipAgId.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwEntSipAgDmmParaEntry

hwEntSipAgDmmParaId		1.3.6.1.4.1.2011.5.25.250.7.1.1
Sipag ID.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..16777215

hwEntSipAgDmmParaStartTimer		1.3.6.1.4.1.2011.5.25.250.7.1.2
Indicates the length of the DMM start timer. Default: 20 Unit: second
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..99

hwEntSipAgDmmParaShortTimer		1.3.6.1.4.1.2011.5.25.250.7.1.3
Indicates the length of the DMM short timer. Default: 4 Unit: second
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..99

hwEntSipAgDmmParaLongTimer		1.3.6.1.4.1.2011.5.25.250.7.1.4
Indicates the length of the DMM long timer. Default: 20 Unit: second
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..99

hwEntSipAgUserGroupTable		1.3.6.1.4.1.2011.5.25.250.8
This table is used to config the parameters of sip user group. The index of this table is hwEntSipAgUserGroupName.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwEntSipAgUserGroupEntry

hwEntSipAgUserGroupEntry		1.3.6.1.4.1.2011.5.25.250.8.1
This table is used to config the parameters of sip user group. The index of this entry is hwEntSipAgUserGroupName.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwEntSipAgUserGroupEntry

hwEntSipAgUserGroupSipAgId		1.3.6.1.4.1.2011.5.25.250.8.1.1
Sipag ID.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..16777215

hwEntSipAgUserGroupId		1.3.6.1.4.1.2011.5.25.250.8.1.2
User Group ID.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..65535

hwEntSipAgUserGroupRegisterUriMode		1.3.6.1.4.1.2011.5.25.250.8.1.3
Indicates the user group register URI mode. Options: inneruser(1) -inner user alone(2) -alone
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	inneruser(1), alone(2)

hwEntSipAgUserGroupUri		1.3.6.1.4.1.2011.5.25.250.8.1.4
Indicates the Register-URI of the sip user group without the domain.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..64)

hwEntSipAgUserGroupGrpName		1.3.6.1.4.1.2011.5.25.250.8.1.5
Indicates the sip user group Name.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..64)

hwEntSipAgUserGroupAuthUserName		1.3.6.1.4.1.2011.5.25.250.8.1.6
Indicates the Auth Username of the sip user group.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..64)

hwEntSipAgUserGroupAuthPassWordMode		1.3.6.1.4.1.2011.5.25.250.8.1.7
Indicates the Auth PasswordMode of the sip user group. Options: password(1) -auth by password ha1(2) -auth by HA1 Default: password(1)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	password(1), ha1(2)

hwEntSipAgUserGroupAuthPassword		1.3.6.1.4.1.2011.5.25.250.8.1.8
Indicates the Auth Password of the sip user group.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..64)

hwEntSipAgUserGroupAuthHA1		1.3.6.1.4.1.2011.5.25.250.8.1.9
Indicates the Auth HA1 value of the sip user group.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..32)

hwEntSipAgUserGroupPrecinctMode		1.3.6.1.4.1.2011.5.25.250.8.1.10
Indicates the user PrecinctMode in the sip user group. Options: local(1) remote(2) Default: local(1)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	local(1), remote(2)

hwEntSipAgUserGroupSubUaProfile		1.3.6.1.4.1.2011.5.25.250.8.1.11
Indicates the flag of the user group with the same UA Profile privilege. Options: enable(1) disable(2) Default: enable(1)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntSipAgUserGroupRowStatus		1.3.6.1.4.1.2011.5.25.250.8.1.12
This is used to create new rows in this table, modify existing rows, and to delete existing rows.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hwEntSipAgUserGroupAdminStatus		1.3.6.1.4.1.2011.5.25.250.8.1.13
Indicates the admin operation of the sip user group. Options: startservice(1) -start service endservice(2) -end service
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	startservice(1), endservice(2)

hwEntSipAgUserGroupRunningState		1.3.6.1.4.1.2011.5.25.250.8.1.14
Indicates the service state of user group. Options: startSvc(1) -start service rBlock(2) -remote block lBlock(3) -local block
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	startSvc(1), rBlock(2), lBlock(3)

hwEntSipAgSoftNumberParaTable		1.3.6.1.4.1.2011.5.25.250.9
This table is used to config the soft number parameters of sipag. The indexes of this table are hwEntSipAgId, hwEntSipAgSoftNumberParaNo.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwEntSipAgSoftNumberParaEntry

hwEntSipAgSoftNumberParaEntry		1.3.6.1.4.1.2011.5.25.250.9.1
This table is used to config the soft number parameters of sipag. The indexes of this entry are hwEntSipAgId, hwEntSipAgSoftNumberParaNo.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwEntSipAgSoftNumberParaEntry

hwEntSipAgSoftNumberParaId		1.3.6.1.4.1.2011.5.25.250.9.1.1
Sipag ID.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..16777215

hwEntSipAgSoftNumberParaNo		1.3.6.1.4.1.2011.5.25.250.9.1.2
The number of sip mg soft number parameter.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hwEntSipAgSoftNumberParaValue		1.3.6.1.4.1.2011.5.25.250.9.1.3
The value of sip mg soft number parameter.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hwEntSipAgSoftStringParaTable		1.3.6.1.4.1.2011.5.25.250.10
This table is used to config the soft string Parameters of SIP interface. The indexes of this table are hwEntSipAgId, hwEntSipAgSoftStringParaNo.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwEntSipAgSoftStringParaEntry

hwEntSipAgSoftStringParaEntry		1.3.6.1.4.1.2011.5.25.250.10.1
This table is used to config the soft string parameters of sipag. The indexes of this entry are hwEntSipAgId, hwEntSipAgSoftStringParaNo.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwEntSipAgSoftStringParaEntry

hwEntSipAgSoftStringParaId		1.3.6.1.4.1.2011.5.25.250.10.1.1
Sipag ID.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..16777215

hwEntSipAgSoftStringParaNo		1.3.6.1.4.1.2011.5.25.250.10.1.2
The number of sip mg soft string parameter.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hwEntSipAgSoftStringParaValue		1.3.6.1.4.1.2011.5.25.250.10.1.3
The value of sip mg soft string parameter.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..64)

hwEntSipAgSoftStringParaRunningTable		1.3.6.1.4.1.2011.5.25.250.11
This table is used to query the running soft string parameters of sipag. The indexes of this table are hwEntSipAgId, hwEntSipAgSoftStringParaNo.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwEntSipAgSoftStringParaRunningEntry

hwEntSipAgSoftStringParaRunningEntry		1.3.6.1.4.1.2011.5.25.250.11.1
This table is used to query the running soft string parameters of sipag. The indexes of this entry are hwEntSipAgId, hwEntSipAgSoftStringParaNo.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwEntSipAgSoftStringParaRunningEntry

hwEntSipAgSoftStringParaRunningId		1.3.6.1.4.1.2011.5.25.250.11.1.1
Sipag ID.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..16777215

hwEntSipAgSoftStringParaRunningNo		1.3.6.1.4.1.2011.5.25.250.11.1.2
The number of sip mg soft string parameter.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hwEntSipAgSoftStringParaRunningValue		1.3.6.1.4.1.2011.5.25.250.11.1.3
The value of sip mg soft string parameter.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

hwEntFaxModemParaTable		1.3.6.1.4.1.2011.5.25.250.12
This table is used to config the fax and modem parameters of sipag. The index of this table is hwEntSipAgId.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwEntFaxModemParaEntry

hwEntFaxModemParaEntry		1.3.6.1.4.1.2011.5.25.250.12.1
This table is used to config the fax parameter. The index of this entry is hwEntSipAgId.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwEntFaxModemParaEntry

hwEntFaxSipAgId		1.3.6.1.4.1.2011.5.25.250.12.1.1
Sipag ID.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..16777215

hwEntFaxTransMode		1.3.6.1.4.1.2011.5.25.250.12.1.2
Indicates the fax transmission mode. Options: thoroughly(1) -use voice codec t38(2) -use T.38 codec Default: thoroughly(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	thoroughly(1), t38(2)

hwEntModemTransMode		1.3.6.1.4.1.2011.5.25.250.12.1.3
Indicates the modem transmission mode. Options: thoroughly(1) -Thoroughly transmission relay(2) -Relay mode Default: thoroughly(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	thoroughly(1), relay(2)

hwEntFaxModemNegoMode		1.3.6.1.4.1.2011.5.25.250.12.1.4
Indicates the negotiate mode. Options: negotiate(1) -negotiate selfswitch(2) -do not negotiate Default: negotiate(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	negotiate(1), selfswitch(2)

hwEntFaxModemParaVbdCodec		1.3.6.1.4.1.2011.5.25.250.12.1.5
Indicates the codec of VBD. Options: g711a(1) -G.711A g711u(2) -G.711U Default: g711a(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	g711a(1), g711u(2)

hwEntFaxModemParaVbdPtType		1.3.6.1.4.1.2011.5.25.250.12.1.6
Indicates the payload type of VBD. Options: static(1) -static payload type dynamic(2) -dynamic payload type Default: static(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	static(1), dynamic(2)

hwEntFaxModemVbdAttributeType		1.3.6.1.4.1.2011.5.25.250.12.1.7
Indicate the format of session attribute lines when starting fax VBD negotiation. Options: v152(1) -v.152 format chinatelecom(2) -chinatelecom format chinatelecomext(3) -chinatelecom ext format ietf(4) -ietf format Default: v152(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	v152(1), chinatelecom(2), chinatelecomext(3), ietf(4)

hwEntFaxModemRtpInterval		1.3.6.1.4.1.2011.5.25.250.12.1.8
Indicates the default RTP packet time of DSP channel. Options: pt5ms(1) pt10ms(2) pt20ms(3) pt30ms(4) Default: pt10ms(2)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	pt5ms(1), pt10ms(2), pt20ms(3), pt30ms(4)

hwEntDtmfParaTable		1.3.6.1.4.1.2011.5.25.250.13
This table is used to config the DTMF parameter of sipag. The index of this table is hwEntSipAgId.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwEntDtmfParaEntry

hwEntDtmfParaEntry		1.3.6.1.4.1.2011.5.25.250.13.1
This table is used to config the DTMF parameter of sipag. The index of this entry is hwEntSipAgId.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwEntDtmfParaEntry

hwEntDtmfSipAgId		1.3.6.1.4.1.2011.5.25.250.13.1.1
Sipag ID.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..16777215

hwEntDtmfTransMode		1.3.6.1.4.1.2011.5.25.250.13.1.2
Indicates the transmission mode of DTMF. Options: thoroughly(1) -transparent transmission erase(2) -erase DTMF Default: thoroughly(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	thoroughly(1), erase(2)

hwEntNteTable		1.3.6.1.4.1.2011.5.25.250.14
This table is used to config the nte parameter of sipag. The index of this table is hwEntSipAgId.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwEntNteEntry

hwEntNteEntry		1.3.6.1.4.1.2011.5.25.250.14.1
This table is used to config the nte parameter of sipag. The index of this entry is hwEntSipAgId..
Status: current	Access: not-accessible
OBJECT-TYPE
	HwEntNteEntry

hwEntNteSipAgId		1.3.6.1.4.1.2011.5.25.250.14.1.1
Sipag ID.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..16777215

hwEntNteNegoMode		1.3.6.1.4.1.2011.5.25.250.14.1.2
Indicates the start mode of NTE. Options: negoStart(1) -negotiate start fixedStart(2) -fixed start noInitiativeStart(3) -no initiative start Default: noInitiativeStart(3)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	negoStart(1), fixedStart(2), noInitiativeStart(3)

hwEntNteFaxModem		1.3.6.1.4.1.2011.5.25.250.14.1.3
Indicates the flag of fax and modem event using nte parameter. Options: enable(1) disable(2) Default: enable(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntNteFlashHook		1.3.6.1.4.1.2011.5.25.250.14.1.4
Indicates the enabled flag of flash hook event using nte parameter. Options: enable(1) disable(2) Default: disable(2)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntNteDtmf		1.3.6.1.4.1.2011.5.25.250.14.1.5
Indicates the enabled flag of dtmf using nte parameter. Options: enable(1) disable(2) Default: enable(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntRedundancyTable		1.3.6.1.4.1.2011.5.25.250.15
This table is used to config the redundancy parameter. The index of this table is hwEntSipAgId.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwEntRedundancyEntry

hwEntRedundancyEntry		1.3.6.1.4.1.2011.5.25.250.15.1
This table is used to config the redundancy parameter of sipag. The index of this entry is hwEntSipAgId.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwEntRedundancyEntry

hwEntRedundancySipAgId		1.3.6.1.4.1.2011.5.25.250.15.1.1
Sipag ID.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..16777215

hwEntRedundancyNegoMode		1.3.6.1.4.1.2011.5.25.250.15.1.2
Indicates the start mode of the redundancy. Options: negoStart(1) -negotiate start fixedStart(2) -fixed start noInitiativeStart(3) -no initiative start Default: noInitiativeStart(3)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	negoStart(1), fixedStart(2), noInitiativeStart(3)

hwEntRedundancyStartMode		1.3.6.1.4.1.2011.5.25.250.15.1.3
Indicates the start mode of the redundancy. Options: smartRedundancy(1) -smart start redundancy ordinaryRedundancy(2) -start redundancy ordinary Default: ordinaryRedundancy(2)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	smartRedundancy(1), ordinaryRedundancy(2)

hwEntRedundancyNte		1.3.6.1.4.1.2011.5.25.250.15.1.4
Indicates the enabled flag of NTE with using redundancy. Options: enable(1) disable(2) Default: disable(2)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntRedundancyVbd		1.3.6.1.4.1.2011.5.25.250.15.1.5
Indicates the enabled flag of the VBD using redundancy. Options: enable(1) disable(2) Default: enable(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntRedundancyVoice		1.3.6.1.4.1.2011.5.25.250.15.1.6
Indicates the enabled flag of voice using redundancy. Options: 1. enable(1) 2. disable(2) Default: disable(2)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntVoiceSipagConformance		1.3.6.1.4.1.2011.5.25.250.16
OBJECT IDENTIFIER

hwEntVoiceSipagCompliances		1.3.6.1.4.1.2011.5.25.250.16.1
OBJECT IDENTIFIER

hwEntVoiceSipagCompliance		1.3.6.1.4.1.2011.5.25.250.16.1.1
The compliance statement for systems supporting the this module.
Status: current	Access: read-write
MODULE-COMPLIANCE

hwEntVoiceSipagGroups		1.3.6.1.4.1.2011.5.25.250.16.2
OBJECT IDENTIFIER

hwEntSipAgConfigGroup		1.3.6.1.4.1.2011.5.25.250.16.2.1
The hwEntSipAgConfig group.
Status: current	Access: read-write
OBJECT-GROUP

hwEntSipAgRunningGroup		1.3.6.1.4.1.2011.5.25.250.16.2.2
The hwEntSipAgRunning group.
Status: current	Access: read-write
OBJECT-GROUP

hwEntSipAgProxyGroup		1.3.6.1.4.1.2011.5.25.250.16.2.3
The hwEntSipAgProxy group.
Status: current	Access: read-write
OBJECT-GROUP

hwEntSipAgProxyRunningGroup		1.3.6.1.4.1.2011.5.25.250.16.2.4
The hwEntSipAgProxyRunning group.
Status: current	Access: read-write
OBJECT-GROUP

hwEntSipProfileGroup		1.3.6.1.4.1.2011.5.25.250.16.2.5
The hwEntSipProfile group.
Status: current	Access: read-write
OBJECT-GROUP

hwEntSipSrvLogicGroup		1.3.6.1.4.1.2011.5.25.250.16.2.6
The hwEntSipSrvLogic group.
Status: current	Access: read-write
OBJECT-GROUP

hwEntSipAgDmmParaGroup		1.3.6.1.4.1.2011.5.25.250.16.2.7
The hwEntSipAgDmmPara group.
Status: current	Access: read-write
OBJECT-GROUP

hwEntSipAgUserGroupGroup		1.3.6.1.4.1.2011.5.25.250.16.2.8
The hwEntSipAgUserGroup group.
Status: current	Access: read-write
OBJECT-GROUP

hwEntSipAgSoftNumberParaGroup		1.3.6.1.4.1.2011.5.25.250.16.2.9
The hwEntSipAgSoftNumberPara group.
Status: current	Access: read-write
OBJECT-GROUP

hwEntSipAgSoftStringParaGroup		1.3.6.1.4.1.2011.5.25.250.16.2.10
The hwEntSipAgSoftStringPara group.
Status: current	Access: read-write
OBJECT-GROUP

hwEntSipAgSoftStringParaRunningGroup		1.3.6.1.4.1.2011.5.25.250.16.2.11
The hwEntSipAgSoftStringParaRunningGroup group.
Status: current	Access: read-write
OBJECT-GROUP

hwEntFaxModemParaGroup		1.3.6.1.4.1.2011.5.25.250.16.2.12
The hwEntFaxModemPara group.
Status: current	Access: read-write
OBJECT-GROUP

hwEntDtmfParaGroup		1.3.6.1.4.1.2011.5.25.250.16.2.13
The hwEntDtmfPara group.
Status: current	Access: read-write
OBJECT-GROUP

hwEntNteGroup		1.3.6.1.4.1.2011.5.25.250.16.2.14
The hwEntNte group.
Status: current	Access: read-write
OBJECT-GROUP

hwEntRedundancyGroup		1.3.6.1.4.1.2011.5.25.250.16.2.15
The hwEntRedundancy group.
Status: current	Access: read-write
OBJECT-GROUP