HUAWEI-ENT-VOICE-PORT-MIB

File: HUAWEI-ENT-VOICE-PORT-MIB.mib (53276 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-CONF	SNMPv2-TC
HUAWEI-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	NOTIFICATION-TYPE
private	Integer32	Unsigned32
MODULE-COMPLIANCE	OBJECT-GROUP	NOTIFICATION-GROUP
TEXTUAL-CONVENTION	IpAddress	TimeTicks
Counter32	RowStatus	DisplayString
hwDatacomm

Defined Types

HwEntFxsPortConfigEntry
SEQUENCE
	hwEntFxsPortIndex	Integer32
	hwEntFxsPortSendGain	Integer32
	hwEntFxsPortRecvGain	Integer32
	hwEntFxsPortDialMode	INTEGER
	hwEntFxsPortReversePoleEnable	INTEGER
	hwEntFxsPortReversePoleLevel	Integer32
	hwEntFxsPortPolarityReverseMode	INTEGER
	hwEntFxsPortLineLock	INTEGER
	hwEntFxsPortNlpMode	INTEGER
	hwEntFxsPortClipReversePole	INTEGER
	hwEntFxsPortImpedance	Integer32
	hwEntFxsPortCurrent	Integer32
	hwEntFxsPortHighLevel	Integer32
	hwEntFxsPortLowLevel	Integer32
	hwEntFxsPortKcType	INTEGER
	hwEntFxsPortVoltage	Integer32
	hwEntFxsPortActualSendGain	Integer32
	hwEntFxsPortActualRecvGain	Integer32

HwEntFxsPortOperEntry
SEQUENCE
	hwEntFxsPortOperIndex	Integer32
	hwEntFxsPortSrvState	INTEGER
	hwEntFxsPortAdminState	INTEGER
	hwEntFxsPortLineState	INTEGER
	hwEntFxsPortAdminOper	INTEGER

HwEntBraPortConfigEntry
SEQUENCE
	hwEntBraPortIndex	Integer32
	hwEntBraPortRemotePower	INTEGER
	hwEntBraPortAutoDeactive	INTEGER
	hwEntBraPortAutoDeactiveDelay	Integer32
	hwEntBraPortWorkMode	INTEGER
	hwEntBraPortL1ActiveMode	INTEGER
	hwEntBraPortUniAlarmReport	INTEGER
	hwEntBraPortL2Monitor	INTEGER

HwEntBraPortOperEntry
SEQUENCE
	hwEntBraPortOperIndex	Integer32
	hwEntBraPortSrvState	INTEGER
	hwEntBraPortAdminState	INTEGER
	hwEntBraPortAlarmState	BITS
	hwEntBraPortAdminOper	INTEGER

HwEntVe1PortConfigEntry
SEQUENCE
	hwEntVe1PortIndex	Integer32
	hwEntVe1PortFrameCheckMode	INTEGER
	hwEntVe1PortImpedance	INTEGER
	hwEntVe1PortSignalType	INTEGER
	hwEntVe1PortAccessMode	INTEGER
	hwEntVe1PortL2Monitor	INTEGER
	hwEntVe1PortErrAlarmSwitch	BITS

HwEntVe1PortOperEntry
SEQUENCE
	hwEntVe1PortOperIndex	Integer32
	hwEntVe1PortSrvState	INTEGER
	hwEntVe1PortAdminState	INTEGER
	hwEntVe1PortWarningState	BITS
	hwEntVe1PortAdminOper	INTEGER

HwEntVe1PortL1AlarmThresholdEntry
SEQUENCE
	hwEntVe1PortL1AlarmThresholdIndex	Integer32
	hwEntVe1PortDmAlarmThreshold	Integer32
	hwEntVe1PortEsAlarmThreshold	Integer32
	hwEntVe1PortCsesAlarmThreshold	Integer32

HwEntFxoPortConfigEntry
SEQUENCE
	hwEntFxoPortIndex	Integer32
	hwEntFxoPortSendGain	Integer32
	hwEntFxoPortRecvGain	Integer32
	hwEntFxoPortDcImpedance	Integer32
	hwEntFxoPortAcImpedance	Integer32
	hwEntFxoPortRingMinDuration	Integer32
	hwEntFxoPortRingMaxInterval	Integer32
	hwEntFxoPortRingFrequency	Integer32
	hwEntFxoPortRingAcAmplitude	Integer32
	hwEntFxoPortRingOffset	Integer32
	hwEntFxoPortFeedMaxVoltage	Integer32
	hwEntFxoPortFeedMinVoltage	Integer32
	hwEntFxoPortFeedMaxCurrent	Integer32
	hwEntFxoPortFeedMinCurrent	Integer32

HwEntFxoPortOperEntry
SEQUENCE
	hwEntFxoPortOperIndex	Integer32
	hwEntFxoPortSrvState	INTEGER
	hwEntFxoPortAdminState	INTEGER
	hwEntFxoPortAdminOper	INTEGER
	hwEntFxoPortLineState	INTEGER

Defined Values

hwEntVoicePortMIB		1.3.6.1.4.1.2011.5.25.252
huawei VOICE PORT mib.
MODULE-IDENTITY

hwEntFxsPortConfigTable		1.3.6.1.4.1.2011.5.25.252.1
Indicates the attribute configuration table of fxs ports.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwEntFxsPortConfigEntry

hwEntFxsPortConfigEntry		1.3.6.1.4.1.2011.5.25.252.1.1
Indicates the attribute configuration entry of fxs ports.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwEntFxsPortConfigEntry

hwEntFxsPortIndex		1.3.6.1.4.1.2011.5.25.252.1.1.1
Indicates the slot/subcard/port index. bits 31-24 (8 bits): reserved bits 23-16 (8 bits): slot index bits 15-8 (8 bits): subcard index bits 7-0 (8 bits): port index
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hwEntFxsPortSendGain		1.3.6.1.4.1.2011.5.25.252.1.1.2
Indicates the send gain the fxs port. 0: 5 dB 1: 4.5 dB 2: 4 dB 3: 3.5 dB 4: 3 dB 5: 2.5 dB 6: 2 dB 7: 1.5 dB 8: 1 dB 9: 0.5 dB 10: 0 dB 11: -0.5 dB 12: -1 dB 13: -1.5 dB 14: -2 dB 15: -2.5 dB 16: -3 dB 17: -3.5 dB 18: -4 dB 19: -4.5 dB 20: -5 dB 21: -5.5 dB 22: -6 dB Default: 10
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..22

hwEntFxsPortRecvGain		1.3.6.1.4.1.2011.5.25.252.1.1.3
Indicates the receive gain the fxs port. 0: 0 dB 1: -0.5 dB 2: -1 dB 3: -1.5 dB 4: -2 dB 5: -2.5 dB 6: -3 dB 7: -3.5 dB 8: -4 dB 9: -4.5 dB 10: -5 dB 11: -5.5 dB 12: -6 dB 13: -6.5 dB 14: -7 dB 15: -7.5 dB 16: -8 dB 17: -8.5 dB 18: -9 dB 19: -9.5 dB 20: -10 dB 21: -10.5 dB 22: -11 dB 23: -11.5 dB 24: -12 dB Default: 14
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..24

hwEntFxsPortDialMode		1.3.6.1.4.1.2011.5.25.252.1.1.4
Indicates the dialing mode. Options: dtmfPulseBoth(1) -DTMF pulse both dtmfOnly(2) -DTMF only pulseOnly(3) -Pulse only Default: dtmfPulseBoth(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	dtmfPulseBoth(1), dtmfOnly(2), pulseOnly(3)

hwEntFxsPortReversePoleEnable		1.3.6.1.4.1.2011.5.25.252.1.1.5
Indicates whether to support the polarity-reversing pulse. Options: enable(1) disable(2) Default: enable(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntFxsPortReversePoleLevel		1.3.6.1.4.1.2011.5.25.252.1.1.6
Indicates the level width of the polarity-reversing pulse. Default: 100 Unit: ms Step: 10 ms.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	20..1270

hwEntFxsPortPolarityReverseMode		1.3.6.1.4.1.2011.5.25.252.1.1.7
Indicates the polarity reversal mode. Options: hard(1) -Hard polarity reversal soft(2) -Soft polarity reversal Default: hard(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	hard(1), soft(2)

hwEntFxsPortLineLock		1.3.6.1.4.1.2011.5.25.252.1.1.8
Indicates whether to support lock port. enable(1) disable(2) Default: enable(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntFxsPortNlpMode		1.3.6.1.4.1.2011.5.25.252.1.1.9
Indicates the Nlp mode of the port. normal(1) -Normal mode ecGainAdjust(2) -Ec gain adjust mode enhance(3) -Enhance mode reduce(4) -Reduce mode disable(5): -Close mode Default: normal(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	normal(1), ecGainAdjust(2), enhance(3), reduce(4), disable(5)

hwEntFxsPortClipReversePole		1.3.6.1.4.1.2011.5.25.252.1.1.10
Indicates whether to support the polarity-reversing pulse when Clip. enable(1) disable(2) Default: disable(2)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntFxsPortImpedance		1.3.6.1.4.1.2011.5.25.252.1.1.11
Indicates the port impedance of the board. Each value corresponds to the required impedance in a specified scenario. 0: Bureau machine in China (200+680\|\| 100nf) 1: User machine in China (200+560\|\| 100nf) 2: 600-ohm interface 3: Interface of Russia (150+510\|\| 47nf) 4: (220+820\|\| 115nf ) 5: (220+820\|\| 120nf ) 6: 900-ohm interface 7: Interface of Brazil (800\|\| 50nf) 8: BT0(Zin=87+1052\|\|228nF+229\|\|28.4nF, Zload=93+615\|\|471nF+179\|\|495nF+244\|\|32nF) 9: HK-BT3(Zin=370+620\|\| 310nf,Zload=600) 10: HK-BT5(Zin=270+264\|\| 357nf+1434\|\| 265nf,Zload=600) 11: BT1(BT0 without AGC) 12: BT2(Zin=(87 +1052 //228nF+229 //28.4nF),Zload=(270 +264 //357nF+1434 //265nF)) 13: BT3(Zin=(87 +1052 //228nF+229 //28.4nF),Zload=(164 +162 //363nF+1227 //350nF)) 14: Commonly used in Europe (Zin= 270+750\|\| 150nf) 15: New zealand (Zin=370+620\|\| 310nf) Default: 2
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..15

hwEntFxsPortCurrent		1.3.6.1.4.1.2011.5.25.252.1.1.12
Port current supported by the board. The value ranges from 0 to 1, which indicates the port current value. 0: 16mA steady current 1: 20mA steady current Default: 1
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..1

hwEntFxsPortHighLevel		1.3.6.1.4.1.2011.5.25.252.1.1.13
Indicates the high power level width. Default: 100 Unit: ms
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	20..500

hwEntFxsPortLowLevel		1.3.6.1.4.1.2011.5.25.252.1.1.14
Indicates the low power level width. Default: 300 Unit: ms
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	20..500

hwEntFxsPortKcType		1.3.6.1.4.1.2011.5.25.252.1.1.15
Indicates the KC type. Options: 1. type16kc(1) 2. type12kc(2) Default: type16kc(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	type16kc(1), type12kc(2)

hwEntFxsPortVoltage		1.3.6.1.4.1.2011.5.25.252.1.1.16
Indicates the valid voltage value of KC. 0: 0.45 Vrms 1: 0.775 Vrms 2: 1.0 Vrms 3: 1.5 Vrms 4: 2.0 Vrms 5: 2.5 Vrms 6: 3.0 Vrms 7: 3.5 Vrms 8: 4.0 Vrms 9: 4.5 Vrms Default: 5
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..9

hwEntFxsPortActualSendGain		1.3.6.1.4.1.2011.5.25.252.1.1.17
Indicates the actual send gain of the fxs port. 0: 5 dB 1: 4.5 dB 2: 4 dB 3: 3.5 dB 4: 3 dB 5: 2.5 dB 6: 2 dB 7: 1.5 dB 8: 1 dB 9: 0.5 dB 10: 0 dB 11: -0.5 dB 12: -1 dB 13: -1.5 dB 14: -2 dB 15: -2.5 dB 16: -3 dB 17: -3.5 dB 18: -4 dB 19: -4.5 dB 20: -5 dB 21: -5.5 dB 22: -6 dB 255: null
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..22 \| 255

hwEntFxsPortActualRecvGain		1.3.6.1.4.1.2011.5.25.252.1.1.18
Indicates the actual receive gain of the fxs port. 0: 0 dB 1: -0.5 dB 2: -1 dB 3: -1.5 dB 4: -2 dB 5: -2.5 dB 6: -3 dB 7: -3.5 dB 8: -4 dB 9: -4.5 dB 10: -5 dB 11: -5.5 dB 12: -6 dB 13: -6.5 dB 14: -7 dB 15: -7.5 dB 16: -8 dB 17: -8.5 dB 18: -9 dB 19: -9.5 dB 20: -10 dB 21: -10.5 dB 22: -11 dB 23: -11.5 dB 24: -12 dB 255: null
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..24 \| 255

hwEntFxsPortOperTable		1.3.6.1.4.1.2011.5.25.252.2
Indicates the operation table (management, maintenance, and status query) of the fxs ports.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwEntFxsPortOperEntry

hwEntFxsPortOperEntry		1.3.6.1.4.1.2011.5.25.252.2.1
Indicates the operation entry (management, maintenance, and status query) of the fxs ports.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwEntFxsPortOperEntry

hwEntFxsPortOperIndex		1.3.6.1.4.1.2011.5.25.252.2.1.1
Indicates the FxsPortOper index. bits 31-24 (8 bits): reserved bits 23-16 (8 bits): slot index bits 15-8 (8 bits): subcard index bits 7-0 (8 bits): port index
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hwEntFxsPortSrvState		1.3.6.1.4.1.2011.5.25.252.2.1.2
Indicates state of the fxs port. Options: normal(1) fault(2) deactive(3) powerdeny(4)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	normal(1), fault(2), deactive(3), powerdeny(4)

hwEntFxsPortAdminState		1.3.6.1.4.1.2011.5.25.252.2.1.3
Indicates admin state of the fxs port. Options: noLoopNoTest(1) noLoopTest(2) localLoopNoTest(3) localLoopTest(4) remoteLoopNoTest(5) remoteLoopTest(6)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	noLoopNoTest(1), noLoopTest(2), localLoopNoTest(3), localLoopTest(4), remoteLoopNoTest(5), remoteLoopTest(6)

hwEntFxsPortLineState		1.3.6.1.4.1.2011.5.25.252.2.1.4
Indicates line state of the fxs port. Options: normal(1) onEarth(2) unknown(3)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	normal(1), onEarth(2), unknown(3)

hwEntFxsPortAdminOper		1.3.6.1.4.1.2011.5.25.252.2.1.5
Indicates operation type the fxs port. Options: remoteLoop(1) localLoop(2) cancelLoop(3)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	remoteLoop(1), localLoop(2), cancelLoop(3)

hwEntBraPortConfigTable		1.3.6.1.4.1.2011.5.25.252.3
Indicates the attribute configuration table of the bra port.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwEntBraPortConfigEntry

hwEntBraPortConfigEntry		1.3.6.1.4.1.2011.5.25.252.3.1
Indicates the attribute configuration entry of the bra port.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwEntBraPortConfigEntry

hwEntBraPortIndex		1.3.6.1.4.1.2011.5.25.252.3.1.1
Indicates the slot/subcard/port index. bits 31-24 (8 bits): reserved bits 23-16 (8 bits): slot index bits 15-8 (8 bits): subcard index bits 7-0 (8 bits): port index
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hwEntBraPortRemotePower		1.3.6.1.4.1.2011.5.25.252.3.1.2
Indicates whether to support remote power supply. Options: enable(1) -Supported disable(2) -Not supported Default: disable(2)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntBraPortAutoDeactive		1.3.6.1.4.1.2011.5.25.252.3.1.3
Indicates whether to support automatic deactivation. Options: enable(1) -Supported disable(2) -Not supported Default: disable(2)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntBraPortAutoDeactiveDelay		1.3.6.1.4.1.2011.5.25.252.3.1.4
Indicates the automatic deactivation delay of the bra port. Default: 30 Unit: second.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	10..360

hwEntBraPortWorkMode		1.3.6.1.4.1.2011.5.25.252.3.1.5
Indicates the bra port working mode. p2mp(1) -Point to multi-point p2p(2) -Point to point Default: p2mp(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	p2mp(1), p2p(2)

hwEntBraPortL1ActiveMode		1.3.6.1.4.1.2011.5.25.252.3.1.6
Indicates layer 1 active mode of the bra port. Options: stable(1) unstable(2) Default: unstable(2).
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	stable(1), unstable(2)

hwEntBraPortUniAlarmReport		1.3.6.1.4.1.2011.5.25.252.3.1.7
Indicates whether to support user network interface fault alarm. enable(1) -Supported disable(2) -Not supported Default: disable(2)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntBraPortL2Monitor		1.3.6.1.4.1.2011.5.25.252.3.1.8
Indicates whether to support layer 2 error statistic. enable(1) -Supported disable(2) -Not supported Default: enable(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntBraPortOperTable		1.3.6.1.4.1.2011.5.25.252.4
Indicates the operation table (management, maintenance, and status query) of the bra ports.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwEntBraPortOperEntry

hwEntBraPortOperEntry		1.3.6.1.4.1.2011.5.25.252.4.1
Indicates the operation entry (management, maintenance, and status query) of the bra ports.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwEntBraPortOperEntry

hwEntBraPortOperIndex		1.3.6.1.4.1.2011.5.25.252.4.1.1
Indicates the BrPortOper index. bits 31-24 (8 bits): reserved bits 23-16 (8 bits): slot index bits 15-8 (8 bits): subcard index bits 7-0 (8 bits): port index
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hwEntBraPortSrvState		1.3.6.1.4.1.2011.5.25.252.4.1.2
Indicates state of the bra port. Options: normal(1) fault(2) deactive(3) powerdeny(4)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	normal(1), fault(2), deactive(3), powerdeny(4)

hwEntBraPortAdminState		1.3.6.1.4.1.2011.5.25.252.4.1.3
Indicates admin state of the bra port. Options: noLoopNoTest(1) noLoopTest(2) localLoopNoTest(3) localLoopTest(4) remoteLoopNoTest(5) remoteLoopTest(6)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	noLoopNoTest(1), noLoopTest(2), localLoopNoTest(3), localLoopTest(4), remoteLoopNoTest(5), remoteLoopTest(6)

hwEntBraPortAlarmState		1.3.6.1.4.1.2011.5.25.252.4.1.4
Indicates the alarm state of the bra port, from left to right, each bit represents one alarm state. 0 means no alarm present,1 means the alarm present. bit0: LT overload bit1: S port fault(EI2) bit2: U port fault(LOS/RSY) bit3: S port deactive(SAI) bit4: U port deactive(ACT)
Status: current	Access: read-only
OBJECT-TYPE
	BITS	bit0(0), bit1(1), bit2(2), bit3(3), bit4(4)

hwEntBraPortAdminOper		1.3.6.1.4.1.2011.5.25.252.4.1.5
Indicates operation type the bra port. Options: remoteLoop(1) localLoop(2) cancelLoop(3)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	remoteLoop(1), localLoop(2), cancelLoop(3)

hwEntVe1PortConfigTable		1.3.6.1.4.1.2011.5.25.252.5
Indicates the attribute configuration table of the ve1 ports.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwEntVe1PortConfigEntry

hwEntVe1PortConfigEntry		1.3.6.1.4.1.2011.5.25.252.5.1
Indicates the attribute configuration entry of the ve1 ports.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwEntVe1PortConfigEntry

hwEntVe1PortIndex		1.3.6.1.4.1.2011.5.25.252.5.1.1
Indicates the slot/subcard/port index. bits 31-24 (8 bits): reserved bits 23-16 (8 bits): slot index bits 15-8 (8 bits): subcard index bits 7-0 (8 bits): port index
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hwEntVe1PortFrameCheckMode		1.3.6.1.4.1.2011.5.25.252.5.1.2
Indicates the CRC4 frame check mode of the ve1 port. Options: enable(1) disable(2) Default: disable(2)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntVe1PortImpedance		1.3.6.1.4.1.2011.5.25.252.5.1.3
Indicates impedance of the ve1 port. Options: ohm75(1) ohm120(2) Default: ohm75(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	ohm75(1), ohm120(2)

hwEntVe1PortSignalType		1.3.6.1.4.1.2011.5.25.252.5.1.4
Indicates signal type of the ve1 port. Options: ccs(1) cas(2) Default: ccs(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	ccs(1), cas(2)

hwEntVe1PortAccessMode		1.3.6.1.4.1.2011.5.25.252.5.1.5
Indicates physical layer digital section access mode of the ve1 port. Options: digitalAccess(1) directAccess(2) Default:digitalAccess(1)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	digitalAccess(1), directAccess(2)

hwEntVe1PortL2Monitor		1.3.6.1.4.1.2011.5.25.252.5.1.6
Indicates whether to support layer 2 error statistic of the ve1 port. enable(1) disable(2) Default: enable(1).
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwEntVe1PortErrAlarmSwitch		1.3.6.1.4.1.2011.5.25.252.5.1.7
Indicates ve1 error alarm switches, from left to right, each bit respresent a switch. 0 means disable, 1 means enable. bit0: report pcm line fault alarm. bit1: when error rate reached ULF(Unconditional Line Failure) threshold, report pcm line fault alarm. bit2: when error rate reached OLF(Optional Line Failure) threshold, report pcm line fault alarm. bit3: when error rate reached LDT(Line Disturbance Transient Event) threshold, report ve1 digital line transient event alarm. bit4: when E1 frame slip frequency exceeded in observation interval reached degraded threshold, report event alarm. bit5: when any line temporary event occurs, report event alarm. Default: 111000
Status: current	Access: read-write
OBJECT-TYPE
	BITS	bit0(0), bit1(1), bit2(2), bit3(3), bit4(4), bit5(5)

hwEntVe1PortOperTable		1.3.6.1.4.1.2011.5.25.252.6
Indicates the operation table (management, maintenance, and status query) of the ve1 ports.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwEntVe1PortOperEntry

hwEntVe1PortOperEntry		1.3.6.1.4.1.2011.5.25.252.6.1
Indicates the operation entry (management, maintenance, and status query) of the ve1 ports.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwEntVe1PortOperEntry

hwEntVe1PortOperIndex		1.3.6.1.4.1.2011.5.25.252.6.1.1
Indicates the Ve1PortOper index. bits 31-24 (8 bits): reserved bits 23-16 (8 bits): slot index bits 15-8 (8 bits): subcard index bits 7-0 (8 bits): port index
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hwEntVe1PortSrvState		1.3.6.1.4.1.2011.5.25.252.6.1.2
Indicates state of the ve1 port. Options: normal(1) fault(2) lineAbnormal(3) powerdeny(4)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	normal(1), fault(2), lineAbnormal(3), powerdeny(4)

hwEntVe1PortAdminState		1.3.6.1.4.1.2011.5.25.252.6.1.3
Indicates admin state of the ve1 port. Options: noLoopNoTest(1) noLoopTest(2) localLoopNoTest(3) localLoopTest(4) remoteLoopNoTest(5) remoteLoopTest(6)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	noLoopNoTest(1), noLoopTest(2), localLoopNoTest(3), localLoopTest(4), remoteLoopNoTest(5), remoteLoopTest(6)

hwEntVe1PortWarningState		1.3.6.1.4.1.2011.5.25.252.6.1.4
Indicates the alarm status of the ve1 line. 0 means no alarm present, 1 means the alarm present. bit0: LOS alarm bit1: AIS alarm bit2: LFA alarm bit3: LMFA alarm bit4: RRA alarm bit5: CRCER alarm bit6: SCOL alarm bit7: ULF alarm bit8: OLF alarm bit9: LDT alarm bit10: error second alarm,in direction ET/LT to NT1 bit11: error second alarm,in direction NT1 to ET/LT bit12: sequential severe error second alarm,in direction ET/LT to NT1 bit13: sequential severe error second alarm,in direction NT1 to ET/LT bit14: degrade minute alarm,in direction ET/LT to NT1 bit15: degrade minute alarm,in direction NT1 to ET/LT
Status: current	Access: read-only
OBJECT-TYPE
	BITS	bit0(0), bit1(1), bit2(2), bit3(3), bit4(4), bit5(5), bit6(6), bit7(7), bit8(8), bit9(9), bit10(10), bit11(11), bit12(12), bit13(13), bit14(14), bit15(15)

hwEntVe1PortAdminOper		1.3.6.1.4.1.2011.5.25.252.6.1.5
Indicates operation type of the ve1 port. Options: remoteLoop(1) localLoop(2) cancelLoop(3)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	remoteLoop(1), localLoop(2), cancelLoop(3)

hwEntVe1PortL1AlarmThresholdTable		1.3.6.1.4.1.2011.5.25.252.7
degrade alarm threshold config table of ve1 port.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwEntVe1PortL1AlarmThresholdEntry

hwEntVe1PortL1AlarmThresholdEntry		1.3.6.1.4.1.2011.5.25.252.7.1
degrade alarm threshold config entry of ve1 port.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwEntVe1PortL1AlarmThresholdEntry

hwEntVe1PortL1AlarmThresholdIndex		1.3.6.1.4.1.2011.5.25.252.7.1.1
Indicates the Ve1PortOper index. bits 31-24 (8 bits): reserved bits 23-16 (8 bits): slot index bits 15-8 (8 bits): subcard index bits 7-0 (8 bits): port index
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hwEntVe1PortDmAlarmThreshold		1.3.6.1.4.1.2011.5.25.252.7.1.2
Indicates the degrade minute alarm threshold. Default: 8
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..60

hwEntVe1PortEsAlarmThreshold		1.3.6.1.4.1.2011.5.25.252.7.1.3
Indicates the error second alarm threshold. Default: 432
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..3600

hwEntVe1PortCsesAlarmThreshold		1.3.6.1.4.1.2011.5.25.252.7.1.4
Indicates the sequential severe error second alarm threshold. Default: 4
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..60

hwEntFxoPortConfigTable		1.3.6.1.4.1.2011.5.25.252.8
Indicates the attribute configuration table of fxo ports.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwEntFxoPortConfigEntry

hwEntFxoPortConfigEntry		1.3.6.1.4.1.2011.5.25.252.8.1
Indicates the attribute configuration entry of fxo ports.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwEntFxoPortConfigEntry

hwEntFxoPortIndex		1.3.6.1.4.1.2011.5.25.252.8.1.1
Indicates the slot/subcard/port index. bits 31-24 (8 bits): reserved bits 23-16 (8 bits): slot index bits 15-8 (8 bits): subcard index bits 7-0 (8 bits): port index
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hwEntFxoPortSendGain		1.3.6.1.4.1.2011.5.25.252.8.1.2
Indicates send gain of the fxo port. 0: 13.5dB, 1: 13.0dB, 2: 12.5dB 3: 12.0dB, 4: 11.5dB, 5: 11.0dB 6: 10.5dB, 7: 10.0dB, 8: 9.5dB 9: 9.0dB, 10: 8.5dB, 11: 8.0dB 12: 7.5dB, 13: 7.0dB, 14: 6.5dB 15: 6.0dB, 16: 5.5dB, 17: 5.0dB 18: 4.5dB, 19: 4.0dB, 20: 3.5dB 21: 3.0dB, 22: 2.5dB, 23: 2.0dB 24: 1.5dB, 25: 1.0dB, 26: 0.5dB 27: 0dB, 28: -0.5dB, 29: -1.0dB 30: -1.5dB, 31: -2.0dB, 32: -2.5dB 33: -3.0dB, 34: -3.5dB, 35: -4.0dB 36: -4.5dB, 37: -5.0dB, 38: -5.5dB 39: -6.0dB, 40: -6.5dB, 41: -7.0dB 42: -7.5dB, 43: -8.0dB, 44: -8.5dB 45: -9.0dB, 46: -9.5dB, 47: -10.0dB 48: -10.5dB, 49: -11.0dB, 50: -11.5dB 51: -12.0dB, 52: -12.5dB, 53: -13.0dB 54: -13.5dB, 55: -14.0dB, 56: -14.5dB 57: -15.0dB, 58: -15.5dB, 59: -16.0dB 60: -16.5dB Default: 27
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..60

hwEntFxoPortRecvGain		1.3.6.1.4.1.2011.5.25.252.8.1.3
Indicates receive gain of the fxo port. 0: 13.5dB, 1: 13.0dB, 2: 12.5dB 3: 12.0dB, 4: 11.5dB, 5: 11.0dB 6: 10.5dB, 7: 10.0dB, 8: 9.5dB 9: 9.0dB, 10: 8.5dB, 11: 8.0dB 12: 7.5dB, 13: 7.0dB, 14: 6.5dB 15: 6.0dB, 16: 5.5dB, 17: 5.0dB 18: 4.5dB, 19: 4.0dB, 20: 3.5dB 21: 3.0dB, 22: 2.5dB, 23: 2.0dB 24: 1.5dB, 25: 1.0dB, 26: 0.5dB 27: 0dB, 28: -0.5dB, 29: -1.0dB 30: -1.5dB, 31: -2.0dB, 32: -2.5dB 33: -3.0dB, 34: -3.5dB, 35: -4.0dB 36: -4.5dB, 37: -5.0dB, 38: -5.5dB 39: -6.0dB, 40: -6.5dB, 41: -7.0dB 42: -7.5dB, 43: -8.0dB, 44: -8.5dB 45: -9.0dB, 46: -9.5dB, 47: -10.0dB 48: -10.5dB, 49: -11.0dB, 50: -11.5dB 51: -12.0dB, 52: -12.5dB, 53: -13.0dB 54: -13.5dB, 55: -14.0dB, 56: -14.5dB 57: -15.0dB, 58: -15.5dB, 59: -16.0dB 60: -16.5dB Default: 34
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..60

hwEntFxoPortDcImpedance		1.3.6.1.4.1.2011.5.25.252.8.1.4
Indicates DC impedance of the fxo port. 0: 50 1: 800 Default: 0 Unit:
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..1

hwEntFxoPortAcImpedance		1.3.6.1.4.1.2011.5.25.252.8.1.5
Indicates AC impedance of the fxo port. 0: 600 1: 900 2: 270 + (750 \|\| 150 nF) and 275 + (780 \|\| 150 nF) 3: 220 + (820 \|\| 120 nF) and 220 + (820 \|\| 115 nF) 4: 370 + (620 \|\| 310 nF) 5: 320 + (1050 \|\| 230 nF) 6: 370 + (820 \|\| 110 nF) 7: 275 + (780 \|\| 115 nF) 8: 20 + (820 \|\| 110 nF) 9: 350 + (1000 \|\| 210 nF) 10: 200 + (680 \|\| 100 nF) 11: 600 + 2.16 F 12: 900 + 1 F 13: 900 + 2.16 F 14: 600 + 1 F 15: Global impedance Default: 0 Unit:
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..15

hwEntFxoPortRingMinDuration		1.3.6.1.4.1.2011.5.25.252.8.1.6
Indicates the min of the ring duration time. 0: 100ms 1: 150ms 2: 200ms 3: 256ms 4: 384ms 5: 512ms 6: 640ms 7: 1024ms Default: 2
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..7

hwEntFxoPortRingMaxInterval		1.3.6.1.4.1.2011.5.25.252.8.1.7
Indicates the max of the ring interval time. 0: not use, 1: 128ms, 2: 256ms, 3: 284ms 4: 512ms, 5: 640ms, 6: 768ms, 7: 896ms 8: 1024ms, 9: 1152ms, 10: 1280ms, 11: 1408ms 12: 1536ms, 13: 1664ms, 14: 1792ms, 15: 1920ms 16: 2000ms, 17: 2500ms, 18: 3000ms, 19: 3500ms 20: 4000ms, 21: 4500ms, 22: 5000ms, 23: 6000ms 24: 7000ms, 25: 8000ms, 26: 9000ms, 27: 10000ms 28: 15000ms Default: 0
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..28

hwEntFxoPortRingFrequency		1.3.6.1.4.1.2011.5.25.252.8.1.8
Indicates the ring frequency. 0: 16Hz 1: 25Hz 2: 50Hz Default: 1
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..2

hwEntFxoPortRingAcAmplitude		1.3.6.1.4.1.2011.5.25.252.8.1.9
Indicates the ring of the AC amplitude. 0: 74V 1: 65V 2: 50V Default: 2
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..2

hwEntFxoPortRingOffset		1.3.6.1.4.1.2011.5.25.252.8.1.10
Indicates the ring offset. 0-100: -50V ~ 50V Default: 70
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..100

hwEntFxoPortFeedMaxVoltage		1.3.6.1.4.1.2011.5.25.252.8.1.11
Indicates the max feed voltage. Default: -20 Unit:V
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	-100..0

hwEntFxoPortFeedMinVoltage		1.3.6.1.4.1.2011.5.25.252.8.1.12
Indicates the min feed voltage. Default: -80 Unit:V
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	-100..0

hwEntFxoPortFeedMaxCurrent		1.3.6.1.4.1.2011.5.25.252.8.1.13
Indicates the max feed current. 0: 25mA 1: 30mA 2: 35mA 3: 40mA Default: 2
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..3

hwEntFxoPortFeedMinCurrent		1.3.6.1.4.1.2011.5.25.252.8.1.14
Indicates the min of the PTP feed current. 0: 16mA 1: 17mA 2: 18mA 3: 19mA 4: 20mA Default: 0
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..4

hwEntFxoPortOperTable		1.3.6.1.4.1.2011.5.25.252.9
Indicates the operation table (management, maintenance, and status query) of the fxo ports.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwEntFxoPortOperEntry

hwEntFxoPortOperEntry		1.3.6.1.4.1.2011.5.25.252.9.1
Indicates the operation entry (management, maintenance, and status query) of the fxo ports.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwEntFxoPortOperEntry

hwEntFxoPortOperIndex		1.3.6.1.4.1.2011.5.25.252.9.1.1
Indicates the FxsPortOper index. bits 31-24 (8 bits): reserved bits 23-16 (8 bits): slot index bits 15-8 (8 bits): subcard index bits 7-0 (8 bits): port index
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hwEntFxoPortSrvState		1.3.6.1.4.1.2011.5.25.252.9.1.2
Indicates state of the fxo port. Options: normal(1) fault(2) deactive(3) powredeny(4)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	normal(1), fault(2), deactive(3), powredeny(4)

hwEntFxoPortAdminState		1.3.6.1.4.1.2011.5.25.252.9.1.3
Indicates the fxo port Admin state. Options: noLoopNoTest(1) noLoopTest(2) localLoopNoTest(3) localLoopTest(4) remoteLoopNoTest(5) remoteLoopTest(6)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	noLoopNoTest(1), noLoopTest(2), localLoopNoTest(3), localLoopTest(4), remoteLoopNoTest(5), remoteLoopTest(6)

hwEntFxoPortLineState		1.3.6.1.4.1.2011.5.25.252.9.1.4
Indicates line state of the fxo port. Options: normal(1) fault(2) unknown(3)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	normal(1), fault(2), unknown(3)

hwEntFxoPortAdminOper		1.3.6.1.4.1.2011.5.25.252.9.1.5
Indicates the operate type. Options: remoteLoop(1) localLoop(2) cancelLoop(3)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	remoteLoop(1), localLoop(2), cancelLoop(3)

hwEntVoicePortConformance		1.3.6.1.4.1.2011.5.25.252.10
OBJECT IDENTIFIER

hwEntVoicePortCompliances		1.3.6.1.4.1.2011.5.25.252.10.1
OBJECT IDENTIFIER

hwEntVoicePortCompliance		1.3.6.1.4.1.2011.5.25.252.10.1.1
The compliance statement for systems supporting the this module.
Status: current	Access: read-write
MODULE-COMPLIANCE

hwEntVoicePortGroups		1.3.6.1.4.1.2011.5.25.252.10.2
OBJECT IDENTIFIER

hwEntFxsPortConfigGroup		1.3.6.1.4.1.2011.5.25.252.10.2.1
The hwEntFxsPortConfig group.
Status: current	Access: read-write
OBJECT-GROUP

hwEntFxsPortOperGroup		1.3.6.1.4.1.2011.5.25.252.10.2.2
The hwEntFxsPortOper group.
Status: current	Access: read-write
OBJECT-GROUP

hwEntBraPortConfigGroup		1.3.6.1.4.1.2011.5.25.252.10.2.3
The HwEntBraPortConfig group.
Status: current	Access: read-write
OBJECT-GROUP

hwEntBraPortOperGroup		1.3.6.1.4.1.2011.5.25.252.10.2.4
The HwEntBraPortOper group.
Status: current	Access: read-write
OBJECT-GROUP

hwEntVe1PortConfigGroup		1.3.6.1.4.1.2011.5.25.252.10.2.5
The HwEntVe1PortConfig group.
Status: current	Access: read-write
OBJECT-GROUP

hwEntVe1PortOperGroup		1.3.6.1.4.1.2011.5.25.252.10.2.6
The HwEntVe1PortOper group.
Status: current	Access: read-write
OBJECT-GROUP

hwEntVe1PortL1AlarmThresholdGroup		1.3.6.1.4.1.2011.5.25.252.10.2.7
The HwEntVe1PortL1AlarmThreshold group.
Status: current	Access: read-write
OBJECT-GROUP

hwEntFxoPortConfigGroup		1.3.6.1.4.1.2011.5.25.252.10.2.8
The HwEntFxoPortConfig group.
Status: current	Access: read-write
OBJECT-GROUP

hwEntFxoPortOperGroup		1.3.6.1.4.1.2011.5.25.252.10.2.9
The HwEntFxoPortOper group.
Status: current	Access: read-write
OBJECT-GROUP