HUAWEI-DSLAM-PITP-MIB

File: HUAWEI-DSLAM-PITP-MIB.mib (70726 bytes)

Imported modules

HUAWEI-ADSL-MIB HUAWEI-MIB IF-MIB
SNMPv2-SMI SNMPv2-TC

Imported symbols

hwAdsllinePvcVpi hwAdslLinePvcVci huaweiUtility
ifIndex Unsigned32 OBJECT-TYPE
MODULE-IDENTITY Integer32 TruthValue
RowStatus DisplayString

Defined Types

HwDslamRAIOFormatEntry  
SEQUENCE    
  hwDslamRAIOObject INTEGER
  hwDslamRAIOIdPara INTEGER
  hwDslamRAIOMode INTEGER
  hwDslamRAIOIfType INTEGER
  hwDslamRAIOFormatString OCTET STRING
  hwDslamRAIORowStatus RowStatus

HwDslamPITPPmodePortPvcEntry  
SEQUENCE    
  hwDslamPITPPmodePortPvcAdminStatus TruthValue
  hwDslamPITPPmodePortPvcRowStatus RowStatus

HwDslamPITPPmodePortEntry  
SEQUENCE    
  hwDslamPITPPmodePortAdminStatus TruthValue
  hwDslamPITPPmodePortUplinkStatus TruthValue
  hwDslamPITPPmodePortRowStatus RowStatus

HwDslamPITPPmodeSuboptionEntry  
SEQUENCE    
  hwDslamPITPPmodeSuboptionIndex Integer32
  hwDslamPITPPmodeSuboptionStatus TruthValue

HwDslamRaioSuboptionEntry  
SEQUENCE    
  hwDslamRaioProtocolTypeIndex Integer32
  hwDslamRaioSuboptionIndex Integer32
  hwDslamRaioSuboptionStatus INTEGER

HwDslamRaioProfileEntry  
SEQUENCE    
  hwDslamRaioProfileName OCTET STRING
  hwDslamRaioProfileAccessNodeIpIfType INTEGER
  hwDslamRaioProfileAccessNodeIpIfNumber Integer32
  hwDslamRaioProfilePitpRaioMode INTEGER
  hwDslamRaioProfileDhcpOption82RaioMode INTEGER
  hwDslamRaioProfileAncpRaioMode INTEGER
  hwDslamRaioProfileDhcpv6OptionRaioMode INTEGER
  hwDslamRaioProfileDhcpv6Option37EnterpriseNumber Unsigned32
  hwDslamRaioProfileAccessNodeId OCTET STRING
  hwDslamRaioProfileRowStatus RowStatus

HwDslamRaioProfileSuboptionEntry  
SEQUENCE    
  hwDslamRaioProfileSuboptionStatus INTEGER

HwDslamRaioProfileFormatEntry  
SEQUENCE    
  hwDslamRaioProfileFormatString OCTET STRING

HwDslamPppoeFlowStatisticsEntry  
SEQUENCE    
  hwDslamPppoeFlowStatisticsIndex Unsigned32
  hwDslamPppoeFlowStatisticsRowStatus RowStatus
  hwDslamPppoeFlowStatisticsOperMode INTEGER
  hwDslamPppoeFlowStatisticsReceivePadi Unsigned32
  hwDslamPppoeFlowStatisticsReceivePado Unsigned32
  hwDslamPppoeFlowStatisticsReceivePadr Unsigned32
  hwDslamPppoeFlowStatisticsReceivePads Unsigned32
  hwDslamPppoeFlowStatisticsReceivePadt Unsigned32
  hwDslamPppoeFlowStatisticsSendPadi Unsigned32
  hwDslamPppoeFlowStatisticsSendPado Unsigned32
  hwDslamPppoeFlowStatisticsSendPadr Unsigned32
  hwDslamPppoeFlowStatisticsSendPads Unsigned32
  hwDslamPppoeFlowStatisticsSendPadt Unsigned32
  hwDslamPppoeFlowStatisticsTagTooLong Unsigned32
  hwDslamPppoeFlowStatisticsFrameTooLong Unsigned32
  hwDslamPppoeFlowStatisticsReceiveUntrusted Unsigned32
  hwDslamPppoeFlowStatisticsReceiveUnknownType Unsigned32

Defined Values

hwDslamPITP 1.3.6.1.4.1.2011.6.42
This MIB module defines Huawei's Policy Information Transfer Protocol (PITP) MIB objects. PITP is a member of the Huawei Group Management Protocol (HGMP) family, and provides the Broadband Remote Access Server (BRAS) with the information about the port of access users. PITP binds user accounts to the access ports together to prevent theft and roaming of user accounts.
MODULE-IDENTITY    

hwDslamPITPStatus 1.3.6.1.4.1.2011.6.42.1
Indicates the status of the global PITP switch. Options: 1. disable(1) -indicates the global PITP switch is off 2. enableVmode(2) -indicates the global PITP switch is V mode 3. enablePmode(3) -indicates the global PITP switch is P mode 4. forwardPmode(4) -indicates not processing the vendor tag of the packet, but transparent it transmitted. Only for P mode 5. rebuildPmode(5) -indicates rebuild the vendor tag from the ONU device, to meet the TR-156 needs, only for P mode Default: disable(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enableVmode(2), enablePmode(3), forwardPmode(4), rebuildPmode(5)  

hwDslamPITPVmodeEtherType 1.3.6.1.4.1.2011.6.42.2
Indicates the Ethernet protocol type of the PITP VBAS. Range: 1536-65535, that is, 0x600-0xFFFF Default: 33280(0x8200) Restrictions: If the value set to a protocol type is the same as any of other protocol types in the system, the setting fails.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1536..65535  

hwDslamPITPXdslPortRateInfoSwitch 1.3.6.1.4.1.2011.6.42.3
Xdsl port rate information switch, current support Adsl only. Options: 1. disable(1) -indicates the Xdsl port rate information switch is off 2. enable(2) -indicates Xdsl port rate information switch is on Default: disable(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwDslamPITPCNTelSwitch 1.3.6.1.4.1.2011.6.42.4
Xdsl add BRAS information switch. Options: 1. disable(1) -indicates the Xdsl add BRAS information switch is off 2. enable(2) -indicates Xdsl add BRAS information switch is on Default: disable(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwDslamPITPTITagSwitch 1.3.6.1.4.1.2011.6.42.5
TI Add Dhcp && PITP Tag information switch Options: 1. disable(1) -indicates the TI Add Dhcp && PITP Tag information switch is off 2. enable(2) -indicates the TI Add Dhcp && PITP Tag information switch is on Default: disable(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwDslamPITPRAIOMode 1.3.6.1.4.1.2011.6.42.6
Indicates the RAIO mode of PPPoE plus/VBAS. Options: 1. common(1) -indicates the RAIO mode of PPPoE plus/VBAS is common 2. xdslPortRate(2) -indicates the RAIO mode of PPPoE plus/VBAS is Xdsl port rate 3. cntel(3) -indicates the RAIO mode of PPPoE plus/VBAS is Xdsl add BRAS 4. ti(4) -indicates the RAIO mode of PPPoE plus/VBAS is TI Add Dhcp && PITP Tag 5. neuf(5) -indicates the RAIO mode of PPPoE plus/VBAS is neuf 6. portUserLabel(6) -indicates the RAIO mode of PPPoE plus/VBAS is portUserLabel 7. bt(7) -indicates the RAIO mode of PPPoE plus/VBAS is bt 8. servicePortUserLabel(8) -indicates the RAIO mode of PPPoE plus/VBAS is servicePortUserLabel 9. dslForumDefault(9) -indicates the RAIO mode of PPPoE plus/VBAS is dslForumDefault 10. brt(10) -indicates the RAIO mode of PPPoE plus/VBAS is brt 11. userDefined(11) -indicates the RAIO mode of PPPoE plus/VBAS is user defined 12. ft(12) -indicates the RAIO mode of PPPoE plus/VBAS is ft 13. cntelXpon(13) -indicates the RAIO mode of PPPoE plus/VBAS is Xpon add BRAS 14. tm(14) -indicates the RAIO mode of PPPoE plus/VBAS is tm 15. bbf(15) -indicates the RAIO mode of PPPoE plus is bbf 16. vnpt(16) -indicates the RAIO mode of PPPoE plus is vnpt Default: common(1) Restrictions: bt(7) is not supported. The VBAS supports only common(1), cntel(3), and userDefined(11). When this leaf is set to userDefined(11), the specific RAIO format must be configured through hwDslamRAIOFormatTable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER common(1), xdslPortRate(2), cntel(3), ti(4), neuf(5), portUserLabel(6), bt(7), servicePortUserLabel(8), dslForumDefault(9), brt(10), userDefined(11), ft(12), cntelXpon(13), tm(14), bbf(15), vnpt(16)  

hwDslamPITPPMODERAIOMode 1.3.6.1.4.1.2011.6.42.7
RAIO(Relay agent info Option) mode of PITP pmode. Options: 1. common(1) -indicates the RAIO mode of PPPoE plus/VBAS is common 2. xdslPortRate(2) -indicates the RAIO mode of PPPoE plus/VBAS is Xdsl port rate 3. cntel(3) -indicates the RAIO mode of PPPoE plus/VBAS is Xdsl add BRAS 4. ti(4) -indicates the RAIO mode of PPPoE plus/VBAS is TI Add Dhcp && PITP Tag 5. neuf(5) -indicates the RAIO mode of PPPoE plus/VBAS is neuf 6. portUserLabel(6) -indicates the RAIO mode of PPPoE plus/VBAS is portUserLabel 7. bt(7) -indicates the RAIO mode of PPPoE plus/VBAS is bt 8. bbf(15) -indicates the RAIO mode of PPPoE plus is bbf Default: common(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER common(1), xdslPortRate(2), cntel(3), ti(4), neuf(5), portUserLabel(6), bt(7), bbf(15)  

hwDslamPITPVMODERAIOMode 1.3.6.1.4.1.2011.6.42.8
RAIO(Relay agent info Option) mode of PITP vmode. Options: 1. common(1) -indicates the RAIO mode of PPPoE plus/VBAS is common 2. cntel(3) -indicates the RAIO mode of PPPoE plus/VBAS is Xdsl add BRAS Default: common(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER common(1), cntel(3)  

hwDslamDHCPOPTION82RAIOMode 1.3.6.1.4.1.2011.6.42.9
Indicates the RAIO mode of DHCP Option82. Options: 1. common(1) -indicates the RAIO mode of DHCP Option82 is common 2. xdslPortRate(2) -indicates the RAIO mode of DHCP Option82 is Xdsl port rate 3. cntel(3) -indicates the RAIO mode of DHCP Option82 is Xdsl add BRAS 4. ti(4) -indicates the RAIO mode of DHCP Option82 is TI Add Dhcp && PITP Tag 5. neuf(5) -indicates the RAIO mode of DHCP Option82 is neuf 6. portUserLabel(6) -indicates the RAIO mode of DHCP Option82 is portUserLabel 7. bt(7) -indicates the RAIO mode of DHCP Option82 is bt 8. servicePortUserLabel(8) -indicates the RAIO mode of DHCP Option82 is servicePortUserLabel 9. dslForumDefault(9) -indicates the RAIO mode of DHCP Option82 is dslForumDefault 10. brt(10) -indicates the RAIO mode of DHCP Option82 is brt 11. userDefined(11) -indicates the RAIO mode of DHCP Option82 is user defined 12. ft(12) -indicates the RAIO mode of DHCP Option82 is ft 13. cntelXpon(13) -indicates the RAIO mode of DHCP Option82 is Xpon add BRAS 14. tm(14) -indicates the RAIO mode of DHCP Option82 is tm 15. bbf(15) -indicates the RAIO mode of DHCP Option82 is bbf 16. vnpt(16) -indicates the RAIO mode of DHCP Option82 is vnpt Default: common(1) Restrictions: bt(7) is not supported. When this leaf is set to userDefined(11), the specific RAIO format must be configured through hwDslamRAIOFormatTable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER common(1), xdslPortRate(2), cntel(3), ti(4), neuf(5), portUserLabel(6), bt(7), servicePortUserLabel(8), dslForumDefault(9), brt(10), userDefined(11), ft(12), cntelXpon(13), tm(14), bbf(15), vnpt(16)  

hwDslamRAIOFormatTable 1.3.6.1.4.1.2011.6.42.10
Used for querying the RAIO format; supports the setting of only the user-defined mode. The indexes of this table are hwDslamRAIOObject, hwDslamRAIOIdPara, hwDslamRAIOMode and hwDslamRAIOIfType.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwDslamRAIOFormatEntry

hwDslamRAIOFormatEntry 1.3.6.1.4.1.2011.6.42.10.1
Used for querying the RAIO format; supports the setting of only the user-defined mode. The indexes of this entry are hwDslamRAIOObject, hwDslamRAIOIdPara, hwDslamRAIOMode and hwDslamRAIOIfType.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwDslamRAIOFormatEntry  

hwDslamRAIOObject 1.3.6.1.4.1.2011.6.42.10.1.1
Indicates the RAIO object. This leaf is an index. Options: 1. pitp(1) -indicates the RAIO object is pitp 2. dhcpOption82(2) -indicates the RAIO object is dhcpOption82 3. ancp(3) -indicates the RAIO object is ancp 4. dhcpv6Option(4) -indicates the RAIO object is dhcpv6Option
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER pitp(1), dhcpOption82(2), ancp(3), dhcpv6Option(4)  

hwDslamRAIOIdPara 1.3.6.1.4.1.2011.6.42.10.1.2
Indicates the RAIO ID parameter. This leaf is an index. Options: 1. cid(1) -indicates the RAIO object is cid 2. rid(2) -indicates the RAIO object is rid 3. info(3) -indicates the RAIO object is info
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER cid(1), rid(2), info(3)  

hwDslamRAIOMode 1.3.6.1.4.1.2011.6.42.10.1.3
Indicates the RAIO mode. This leaf is an index. Options: 1. common(1) -indicates the RAIO mode is common 2. xdslPortRate(2) -indicates the RAIO mode is Xdsl port rate 3. cntel(3) -indicates the RAIO mode is Xdsl add BRAS 4. ti(4) -indicates the RAIO mode is TI Add Dhcp && PITP Tag 5. neuf(5) -indicates the RAIO mode is neuf 6. portUserLabel(6) -indicates the RAIO mode is portUserLabel 7. bt(7) -indicates the RAIO mode is bt 8. servicePortUserLabel(8) -indicates the RAIO mode is servicePortUserLabel 9. dslForumDefault(9) -indicates the RAIO mode is dslForumDefault 10. brt(10) -indicates the RAIO mode is brt 11. userDefined(11) -indicates the RAIO mode is user defined 12. ft(12) -indicates the RAIO mode is ft 13. cntelXpon(13) -indicates the RAIO mode is Xpon add BRAS 14. tm(14) -indicates the RAIO mode is tm 15. bbf(15) -indicates the RAIO mode is bbf 16. vnpt(16) -indicates the RAIO mode is vnpt Default: common(1) Restrictions: bt(7) is not supported. The VBAS supports only common(1), cntel(3), and userDefined(11).
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER common(1), xdslPortRate(2), cntel(3), ti(4), neuf(5), portUserLabel(6), bt(7), servicePortUserLabel(8), dslForumDefault(9), brt(10), userDefined(11), ft(12), cntelXpon(13), tm(14), bbf(15), vnpt(16)  

hwDslamRAIOIfType 1.3.6.1.4.1.2011.6.42.10.1.4
Indicates the interface type. Options: 1. atm(1) -atm interface type 2. eth(2) -eth interface type 3. xpon(3) -xpon interface type 4. eoc(4) -eoc interface type 5. docsis(5) -docsis interface type For the ATM access mode (the ATM mode of xDSL boards), the value of this leaf is atm(1); for the Ethernet access mode (the PTM mode of the OPFA board and xDSL boards), the value of this leaf is eth(2); for the xPON access mode, the value of this leaf is xpon(3); for the EOC access mode, the value of this leaf is eoc(4); for the docsis access mode, the value of this leaf is docsis(5).
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER atm(1), eth(2), xpon(3), eoc(4), docsis(5)  

hwDslamRAIOFormatString 1.3.6.1.4.1.2011.6.42.10.1.5
Indicates the character string of the RAIO format. Range: a string of 0-255 characters.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hwDslamRAIORowStatus 1.3.6.1.4.1.2011.6.42.10.1.6
Indicates the row status, used for deleting the RAIO format. Options createAndGo(4) and destroy(6) are supported. Currently, this leaf does not support the create and query operations. To modify the RAIO format, you need not bind the row status. To delete the RAIO format, you must input hwDslamRAIORowStatus.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwDslamPITPPmodePortPvcTable 1.3.6.1.4.1.2011.6.42.11
PITP pmode of pvc supported port management table. The indexes of this table are ifIndex, hwAdsllinePvcVpi and hwAdslLinePvcVci.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwDslamPITPPmodePortPvcEntry

hwDslamPITPPmodePortPvcEntry 1.3.6.1.4.1.2011.6.42.11.1
PITP pmode of pvc supported port management table. The indexes of this entry are ifIndex, hwAdsllinePvcVpi and hwAdslLinePvcVci.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwDslamPITPPmodePortPvcEntry  

hwDslamPITPPmodePortPvcAdminStatus 1.3.6.1.4.1.2011.6.42.11.1.1
PITP pmode of pvc supported port administer state. Options: true(enable), false(disable),the default Default: false
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hwDslamPITPPmodePortPvcRowStatus 1.3.6.1.4.1.2011.6.42.11.1.2
Row status. Add or delete a table item.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwDslamPITPPmodePortTable 1.3.6.1.4.1.2011.6.42.12
PITP pmode of port management table. The index of this table is ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwDslamPITPPmodePortEntry

hwDslamPITPPmodePortEntry 1.3.6.1.4.1.2011.6.42.12.1
PITP pmode of port management table. The index of this entry is ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwDslamPITPPmodePortEntry  

hwDslamPITPPmodePortAdminStatus 1.3.6.1.4.1.2011.6.42.12.1.1
PITP pmode of port administer state. Options: true(enable), false(disable) Default: false
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hwDslamPITPPmodePortUplinkStatus 1.3.6.1.4.1.2011.6.42.12.1.2
Up-link administer state. Only a port on main board can be an up-link. Options: true(yes), false(no), Default: true
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hwDslamPITPPmodePortRowStatus 1.3.6.1.4.1.2011.6.42.12.1.3
Row status. Add or delete a table item.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwDslamPITPPmodeSuboption90Status 1.3.6.1.4.1.2011.6.42.13
Indicates PPPoE plus Suboption90. Options: 1. true(1) -indicates PPPoE plus Suboption90 is enable 2. false(2) -indicates PPPoE plus Suboption90 is disable Default: false(2) Restrictions: The operation on this leaf takes effect in the PPPoE plus mode only.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hwDslamPITPPmodeSuboptionTable 1.3.6.1.4.1.2011.6.42.14
PITP pmode suboption table. The index of this table is hwDslamPITPPmodeSuboptionIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwDslamPITPPmodeSuboptionEntry

hwDslamPITPPmodeSuboptionEntry 1.3.6.1.4.1.2011.6.42.14.1
PITP pmode suboption table. The index of this entry is hwDslamPITPPmodeSuboptionIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwDslamPITPPmodeSuboptionEntry  

hwDslamPITPPmodeSuboptionIndex 1.3.6.1.4.1.2011.6.42.14.1.1
the index of PITP pmode suboption: -index 1 stand for suboption 0x81; -index 2 stand for suboption 0x82; -index 3 stand for suboption 0x83; -index 4 stand for suboption 0x84; -index 5 stand for suboption 0x85; -index 6 stand for suboption 0x86; -index 7 stand for suboption 0x87; -index 8 stand for suboption 0x88; -index 9 stand for suboption 0x89; -index 10 stand for suboption 0x8a; -index 11 stand for suboption 0x8b; -index 12 stand for suboption 0x8c; -index 13 stand for suboption 0x8d; -index 14 stand for suboption 0x8e; -index 15 stand for suboption 0x90; DEFVAL { 1 }
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..15  

hwDslamPITPPmodeSuboptionStatus 1.3.6.1.4.1.2011.6.42.14.1.2
Configuration of PITP pmode suboption. Options: true(enable), false(disable) Default: false
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hwDslamRaioSuboptionTable 1.3.6.1.4.1.2011.6.42.15
Used for setting and querying RAIO suboptions. The indexes of this table are hwDslamRaioProtocolTypeIndex and hwDslamRaioSuboptionIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwDslamRaioSuboptionEntry

hwDslamRaioSuboptionEntry 1.3.6.1.4.1.2011.6.42.15.1
Used for setting and querying RAIO suboptions. The indexes of this entry are hwDslamRaioProtocolTypeIndex and hwDslamRaioSuboptionIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwDslamRaioSuboptionEntry  

hwDslamRaioProtocolTypeIndex 1.3.6.1.4.1.2011.6.42.15.1.1
Indicates the protocol type supporting RAIO suboptions. This leaf is an index. Range: 1-255 The value 1 indicates DHCP Option82, 2 indicates PPPoE plus, and 3-255 are reserved.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..255  

hwDslamRaioSuboptionIndex 1.3.6.1.4.1.2011.6.42.15.1.2
Indicates the RAIO suboption. This leaf is an index. Range: 1-255 1-17 correspond to suboptions 0x81-0x91.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..255  

hwDslamRaioSuboptionStatus 1.3.6.1.4.1.2011.6.42.15.1.3
Indicates the status of the RAIO suboption. Options: 1. enable(1) -indicates the RAIO suboption is enable 2. disable(2) -indicates the RAIO suboption is disable Default: disable(2)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwDslamAccessNodeId 1.3.6.1.4.1.2011.6.42.16
Indicates the ANID. Range: a string of 0-50 characters Restrictions: This leaf does not support the create operation, and supports only the modify and query operations. To cancel the settings of the ANID, you can directly perform the set operation without inputting a leaf value.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..50)  

hwDslamAccessNodeIp 1.3.6.1.4.1.2011.6.42.17
Indicates the L3 interface in the ANIP field. Currently, the device management IP address is used as the device identifier. The value of the device management IP address is obtained through the VLAN L3 interface specified by hwDslamAccessNodeIp. Range: 0-4294967295 Restrictions: This leaf does not support the create operation, and supports only the modify and query operations. To cancel the settings of the ANIP, input leaf value 4294967295 (equaling 0xFFFFFFFF) and perform the set operation.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwDslamAncpRAIOMode 1.3.6.1.4.1.2011.6.42.18
RAIO(Relay agent info Option) mode of ANCP. Options: 1. common(1) -indicates the RAIO mode of ANCP is common 2. xdslPortRate(2) -indicates the RAIO mode of ANCP is Xdsl port rate 3. cntel(3) -indicates the RAIO mode of ANCP is Xdsl add BRAS 4. ti(4) -indicates the RAIO mode of ANCP is TI Add Dhcp && PITP Tag 5. neuf(5) -indicates the RAIO mode of ANCP is neuf 6. portUserLabel(6) -indicates the RAIO mode of ANCP is portUserLabel 7. bt(7) -indicates the RAIO mode of ANCP is bt 8. servicePortUserLabel(8) -indicates the RAIO mode of ANCP is servicePortUserLabel 9. dslForumDefault(9) -indicates the RAIO mode of ANCP is dslForumDefault 10. brt(10) -indicates the RAIO mode of ANCP is brt 11. userDefined(11) -indicates the RAIO mode of ANCP is user defined 12. ft(12) -indicates the RAIO mode of ANCP is ft 13. cntelXpon(13) -indicates the RAIO mode of ANCP is Xpon add BRAS 14. tm(14) -indicates the RAIO mode of ANCP is tm 15. bbf(15) -indicates the RAIO mode of ANCP is bbf 16. vnpt(16) -indicates the RAIO mode of ANCP is vnpt Default: dslForumDefault(9)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER common(1), xdslPortRate(2), cntel(3), ti(4), neuf(5), portUserLabel(6), bt(7), servicePortUserLabel(8), dslForumDefault(9), brt(10), userDefined(11), ft(12), cntelXpon(13), tm(14), bbf(15), vnpt(16)  

hwDslamDHCPv6OPTIONRAIOMode 1.3.6.1.4.1.2011.6.42.19
Indicates the RAIO mode of DHCPv6 Option. Options: 1. common(1) -indicates the RAIO mode of DHCPv6 option is common 2. xdslPortRate(2) -indicates the RAIO mode of DHCPv6 option is Xdsl port rate 3. cntel(3) -indicates the RAIO mode of DHCPv6 option is Xdsl add BRAS 4. ti(4) -indicates the RAIO mode of DHCPv6 option is TI Add Dhcp && PITP Tag 5. neuf(5) -indicates the RAIO mode of DHCPv6 option is neuf 6. portUserLabel(6) -indicates the RAIO mode of DHCPv6 option is portUserLabel 7. bt(7) -indicates the RAIO mode of DHCPv6 option is bt 8. servicePortUserLabel(8) -indicates the RAIO mode of DHCPv6 option is servicePortUserLabel 9. dslForumDefault(9) -indicates the RAIO mode of DHCPv6 option is dslForumDefault 10. brt(10) -indicates the RAIO mode of DHCPv6 option is brt 11. userDefined(11) -indicates the RAIO mode of DHCPv6 option is user defined 12. ft(12) -indicates the RAIO mode of DHCPv6 option is ft 13. cntelXpon(13) -indicates the RAIO mode of DHCPv6 option is Xpon add BRAS 14. tm(14) -indicates the RAIO mode of DHCPv6 option is tm 15. bbf(15) -indicates the RAIO mode of DHCPv6 option is bbf 16. vnpt(16) -indicates the RAIO mode of DHCPv6 option is vnpt Default: common(1) Restrictions: bt(7) is not supported. When this leaf is set to userDefined(11), the specific RAIO format must be configured through hwDslamRAIOFormatTable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER common(1), xdslPortRate(2), cntel(3), ti(4), neuf(5), portUserLabel(6), bt(7), servicePortUserLabel(8), dslForumDefault(9), brt(10), userDefined(11), ft(12), cntelXpon(13), tm(14), bbf(15), vnpt(16)  

hwDslamRAIODhcpv6Option37EnterpriseNumber 1.3.6.1.4.1.2011.6.42.20
Indicates the enterprise number which is used in DHCPv6 option 37. Range: 0-4294967295 DEFVAL {2011}
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwDslamRaioProfileTable 1.3.6.1.4.1.2011.6.42.21
Used for creating, setting and querying RAIO profiles. The index of this table is hwDslamRaioProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwDslamRaioProfileEntry

hwDslamRaioProfileEntry 1.3.6.1.4.1.2011.6.42.21.1
Used for creating, setting and querying RAIO profiles. The index of this entry is hwDslamRaioProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwDslamRaioProfileEntry  

hwDslamRaioProfileName 1.3.6.1.4.1.2011.6.42.21.1.1
RAIO profile name. Range: a string of 1-32 characters
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

hwDslamRaioProfileAccessNodeIpIfType 1.3.6.1.4.1.2011.6.42.21.1.2
Indicates the interface type. Options: 1. notConfiged(1) -indicates that no source interface is configured 2. meth(2) -indicates the MEth interface 3. loopback(3) -indicates the loopback interface 4. vlanif(4) -indicates the VLAN interface When this leaf is set to notConfiged(1), it means that no source interface is configured in the case of the create operation, and that the source interface is deleted in the case of the modify operation.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER notConfiged(1), meth(2), loopback(3), vlanif(4)  

hwDslamRaioProfileAccessNodeIpIfNumber 1.3.6.1.4.1.2011.6.42.21.1.3
Indicates the interface ID. Range: 0-4093 Range for the MEth interface: 0 Range for the loopback interface: 0-31 Range for the VLAN interface: 1-4093 The interface ID and interface type together identify an interface.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..4093  

hwDslamRaioProfilePitpRaioMode 1.3.6.1.4.1.2011.6.42.21.1.4
Indicates the RAIO mode. This leaf is an index. Options: 1. common(1) -indicates the RAIO mode of PPPoE plus/VBAS is common 2. xdslPortRate(2) -indicates the RAIO mode of PPPoE plus/VBAS is Xdsl port rate 3. cntel(3) -indicates the RAIO mode of PPPoE plus/VBAS is Xdsl add BRAS 4. ti(4) -indicates the RAIO mode of PPPoE plus/VBAS is TI Add Dhcp && PITP Tag 5. neuf(5) -indicates the RAIO mode of PPPoE plus/VBAS is neuf 6. portUserLabel(6) -indicates the RAIO mode of PPPoE plus/VBAS is portUserLabel 7. bt(7) -indicates the RAIO mode of PPPoE plus/VBAS is bt 8. servicePortUserLabel(8) -indicates the RAIO mode of PPPoE plus/VBAS is servicePortUserLabel 9. dslForumDefault(9) -indicates the RAIO mode of PPPoE plus/VBAS is dslForumDefault 10. brt(10) -indicates the RAIO mode of PPPoE plus/VBAS is brt 11. userDefined(11) -indicates the RAIO mode of PPPoE plus/VBAS is user defined 12. ft(12) -indicates the RAIO mode of PPPoE plus/VBAS is ft 13. cntelXpon(13) -indicates the RAIO mode of PPPoE plus/VBAS is Xpon add BRAS 14. tm(14) -indicates the RAIO mode of PPPoE plus/VBAS is tm 15. bbf(15) -indicates the RAIO mode of PPPoE plus/VBAS is bbf 16. vnpt(16) -indicates the RAIO mode of PPPoE plus/VBAS is vnpt Default: common(1) Restrictions: bt(7) is not supported. The VBAS supports only common(1), cntel(3), and userDefined(11).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER common(1), xdslPortRate(2), cntel(3), ti(4), neuf(5), portUserLabel(6), bt(7), servicePortUserLabel(8), dslForumDefault(9), brt(10), userDefined(11), ft(12), cntelXpon(13), tm(14), bbf(15), vnpt(16)  

hwDslamRaioProfileDhcpOption82RaioMode 1.3.6.1.4.1.2011.6.42.21.1.5
Indicates the RAIO mode. This leaf is an index. Options: 1. common(1) -indicates the RAIO mode of DHCP Option82 is common 2. xdslPortRate(2) -indicates the RAIO mode of DHCP Option82 is Xdsl port rate 3. cntel(3) -indicates the RAIO mode of DHCP Option82 is Xdsl add BRAS 4. ti(4) -indicates the RAIO mode of DHCP Option82 is TI Add Dhcp && PITP Tag 5. neuf(5) -indicates the RAIO mode of DHCP Option82 is neuf 6. portUserLabel(6) -indicates the RAIO mode of DHCP Option82 is portUserLabel 7. bt(7) -indicates the RAIO mode of DHCP Option82 is bt 8. servicePortUserLabel(8) -indicates the RAIO mode of DHCP Option82 is servicePortUserLabel 9. dslForumDefault(9) -indicates the RAIO mode of DHCP Option82 is dslForumDefault 10. brt(10) -indicates the RAIO mode of DHCP Option82 is brt 11. userDefined(11) -indicates the RAIO mode of DHCP Option82 is user defined 12. ft(12) -indicates the RAIO mode of DHCP Option82 is ft 13. cntelXpon(13) -indicates the RAIO mode of DHCP Option82 is Xpon add BRAS 14. tm(14) -indicates the RAIO mode of DHCP Option82 is tm 15. bbf(15) -indicates the RAIO mode of DHCP Option82 is bbf 16. vnpt(16) -indicates the RAIO mode of DHCP Option82 is vnpt Default: common(1) Restrictions: bt(7) is not supported.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER common(1), xdslPortRate(2), cntel(3), ti(4), neuf(5), portUserLabel(6), bt(7), servicePortUserLabel(8), dslForumDefault(9), brt(10), userDefined(11), ft(12), cntelXpon(13), tm(14), bbf(15), vnpt(16)  

hwDslamRaioProfileAncpRaioMode 1.3.6.1.4.1.2011.6.42.21.1.6
Indicates the RAIO mode. This leaf is an index. Options: 1. common(1) -indicates the RAIO mode of ANCP is common 2. xdslPortRate(2) -indicates the RAIO mode of ANCP is Xdsl port rate 3. cntel(3) -indicates the RAIO mode of ANCP is Xdsl add BRAS 4. ti(4) -indicates the RAIO mode of ANCP is TI Add Dhcp && PITP Tag 5. neuf(5) -indicates the RAIO mode of ANCP is neuf 6. portUserLabel(6) -indicates the RAIO mode of ANCP is portUserLabel 7. bt(7) -indicates the RAIO mode of ANCP is bt 8. servicePortUserLabel(8) -indicates the RAIO mode of ANCP is servicePortUserLabel 9. dslForumDefault(9) -indicates the RAIO mode of ANCP is dslForumDefault 10. brt(10) -indicates the RAIO mode of ANCP is brt 11. userDefined(11) -indicates the RAIO mode of ANCP is user defined 12. ft(12) -indicates the RAIO mode of ANCP is ft 13. cntelXpon(13) -indicates the RAIO mode of ANCP is Xpon add BRAS 14. tm(14) -indicates the RAIO mode of ANCP is tm 15. bbf(15) -indicates the RAIO mode of ANCP is bbf 16. vnpt(16) -indicates the RAIO mode of ANCP is vnpt Default: dslForumDefault(9) Restrictions: bt(7) is not supported.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER common(1), xdslPortRate(2), cntel(3), ti(4), neuf(5), portUserLabel(6), bt(7), servicePortUserLabel(8), dslForumDefault(9), brt(10), userDefined(11), ft(12), cntelXpon(13), tm(14), bbf(15), vnpt(16)  

hwDslamRaioProfileDhcpv6OptionRaioMode 1.3.6.1.4.1.2011.6.42.21.1.7
Indicates the RAIO mode. This leaf is an index. Options: 1. common(1) -indicates the RAIO mode of DHCPv6 is common 2. xdslPortRate(2) -indicates the RAIO mode of DHCPv6 is Xdsl port rate 3. cntel(3) -indicates the RAIO mode of DHCPv6 is Xdsl add BRAS 4. ti(4) -indicates the RAIO mode of DHCPv6 is TI Add Dhcp && PITP Tag 5. neuf(5) -indicates the RAIO mode of DHCPv6 is neuf 6. portUserLabel(6) -indicates the RAIO mode of DHCPv6 is portUserLabel 7. bt(7) -indicates the RAIO mode of DHCPv6 is bt 8. servicePortUserLabel(8) -indicates the RAIO mode of DHCPv6 is servicePortUserLabel 9. dslForumDefault(9) -indicates the RAIO mode of DHCPv6 is dslForumDefault 10. brt(10) -indicates the RAIO mode of DHCPv6 is brt 11. userDefined(11) -indicates the RAIO mode of DHCPv6 is user defined 12. ft(12) -indicates the RAIO mode of DHCPv6 is ft 13. cntelXpon(13) -indicates the RAIO mode of DHCPv6 is Xpon add BRAS 14. tm(14) -indicates the RAIO mode of DHCPv6 is tm 15. bbf(15) -indicates the RAIO mode of DHCPv6 is bbf 16. vnpt(16) -indicates the RAIO mode of DHCPv6 is vnpt Default: common(1) Restrictions: bt(7) is not supported.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER common(1), xdslPortRate(2), cntel(3), ti(4), neuf(5), portUserLabel(6), bt(7), servicePortUserLabel(8), dslForumDefault(9), brt(10), userDefined(11), ft(12), cntelXpon(13), tm(14), bbf(15), vnpt(16)  

hwDslamRaioProfileDhcpv6Option37EnterpriseNumber 1.3.6.1.4.1.2011.6.42.21.1.8
Indicates the enterprise number which is used in DHCPv6 option 37. Range: 0-4294967295
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwDslamRaioProfileAccessNodeId 1.3.6.1.4.1.2011.6.42.21.1.9
Indicates the ANID. Range: a string of 0-50 characters Restrictions:
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..50)  

hwDslamRaioProfileRowStatus 1.3.6.1.4.1.2011.6.42.21.1.10
Indicates the row status, used for creating and deleting the RAIO profile. Options createAndGo(4) and destroy(6) are supported. Currently, to modify the RAIO profile, you need not bind the row status. To delete the RAIO profile, you must input hwDslamRaioProfileRowStatus.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwDslamRaioProfileSuboptionTable 1.3.6.1.4.1.2011.6.42.22
Used for setting and querying the RAIO suboption state of the RAIO profile. The indexes of this table are hwDslamRaioProfileName, hwDslamRaioProtocolTypeIndex and hwDslamRaioSuboptionIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwDslamRaioProfileSuboptionEntry

hwDslamRaioProfileSuboptionEntry 1.3.6.1.4.1.2011.6.42.22.1
Used for setting and querying the RAIO suboption state of the RAIO profile. The indexes of this entry are hwDslamRaioProfileName, hwDslamRaioProtocolTypeIndex and hwDslamRaioSuboptionIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwDslamRaioProfileSuboptionEntry  

hwDslamRaioProfileSuboptionStatus 1.3.6.1.4.1.2011.6.42.22.1.1
Indicates the status of the RAIO suboption. Options: 1. enable(1) -indicates the RAIO suboption is enable 2. disable(2) -indicates the RAIO suboption is disable Default: disable(2)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwDslamRaioProfileFormatTable 1.3.6.1.4.1.2011.6.42.23
Used for querying the RAIO format of the RAIO profile; supports the setting of only the user-defined mode. The indexes of this table are hwDslamRaioProfileName, hwDslamRAIOObject, hwDslamRAIOIdPara, hwDslamRAIOMode, and hwDslamRAIOIfType.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwDslamRaioProfileFormatEntry

hwDslamRaioProfileFormatEntry 1.3.6.1.4.1.2011.6.42.23.1
Used for querying the RAIO format of the RAIO profile; supports the setting of only the user-defined mode. The indexes of this entry are hwDslamRaioProfileName, hwDslamRAIOObject, hwDslamRAIOIdPara, hwDslamRAIOMode, and hwDslamRAIOIfType.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwDslamRaioProfileFormatEntry  

hwDslamRaioProfileFormatString 1.3.6.1.4.1.2011.6.42.23.1.1
Indicates the character string of the RAIO format. Range: a string of 0-255 characters.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hwDslamPppoeFlowStatisticsTable 1.3.6.1.4.1.2011.6.42.24
Used for querying and resetting the pppoeplus statistics on flow. The index of this table is hwDslamPppoeFlowStatisticsIndex. Statistics for a maximum of 64 service ports are supported.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwDslamPppoeFlowStatisticsEntry

hwDslamPppoeFlowStatisticsEntry 1.3.6.1.4.1.2011.6.42.24.1
Used for querying and resetting the pppoeplus statistics on flow. The index of this entry is hwDslamPppoeFlowStatisticsIndex. Statistics for a maximum of 64 service ports are supported.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwDslamPppoeFlowStatisticsEntry  

hwDslamPppoeFlowStatisticsIndex 1.3.6.1.4.1.2011.6.42.24.1.1
The index of the PPPoE statistics on flow.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

hwDslamPppoeFlowStatisticsRowStatus 1.3.6.1.4.1.2011.6.42.24.1.2
The present operation status of the row. CreateAndGo(4) means enable the PPPoE statistics on flow. Destroy(6) means disable the PPPoE statistics on flow. Active(1) will be returned in the get operation.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwDslamPppoeFlowStatisticsOperMode 1.3.6.1.4.1.2011.6.42.24.1.3
Indicates reset the PPPoE statistics on flow. Options: 1. reset(1) -In the set operation, reset the PPPoE statistics on flow. 2. invalid(2) -In the get operation, the invalid value 2 is returned. Default: invalid(2)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER reset(1), invalid(2)  

hwDslamPppoeFlowStatisticsReceivePadi 1.3.6.1.4.1.2011.6.42.24.1.4
Number of received PADI packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwDslamPppoeFlowStatisticsReceivePado 1.3.6.1.4.1.2011.6.42.24.1.5
Number of received PADO packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwDslamPppoeFlowStatisticsReceivePadr 1.3.6.1.4.1.2011.6.42.24.1.6
Number of received PADR packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwDslamPppoeFlowStatisticsReceivePads 1.3.6.1.4.1.2011.6.42.24.1.7
Number of received PADS packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwDslamPppoeFlowStatisticsReceivePadt 1.3.6.1.4.1.2011.6.42.24.1.8
Number of received PADT packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwDslamPppoeFlowStatisticsSendPadi 1.3.6.1.4.1.2011.6.42.24.1.9
Number of sent PADI packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwDslamPppoeFlowStatisticsSendPado 1.3.6.1.4.1.2011.6.42.24.1.10
Number of sent PADO packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwDslamPppoeFlowStatisticsSendPadr 1.3.6.1.4.1.2011.6.42.24.1.11
Number of sent PADR packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwDslamPppoeFlowStatisticsSendPads 1.3.6.1.4.1.2011.6.42.24.1.12
Number of sent PADS packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwDslamPppoeFlowStatisticsSendPadt 1.3.6.1.4.1.2011.6.42.24.1.13
Number of sent PADT packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwDslamPppoeFlowStatisticsTagTooLong 1.3.6.1.4.1.2011.6.42.24.1.14
Number of packets exceed the maximum tag size.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwDslamPppoeFlowStatisticsFrameTooLong 1.3.6.1.4.1.2011.6.42.24.1.15
Number of packets exceed the maximum packet size.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwDslamPppoeFlowStatisticsReceiveUntrusted 1.3.6.1.4.1.2011.6.42.24.1.16
Number of received packets with untrusted tag.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwDslamPppoeFlowStatisticsReceiveUnknownType 1.3.6.1.4.1.2011.6.42.24.1.17
Number of received packets with unknown type.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwDslamPppoeReverse 1.3.6.1.4.1.2011.6.42.25
Indicates the status of the global reverse PPPoE packets switch. Options: 1. enable(1) -indicates the reverse PPPoE packets are forwarded 2. disable(2) -indicates the reverse PPPoE packets are dropped Default: disable(2)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor