HUAWEI-DLDP-MIB

File: HUAWEI-DLDP-MIB.mib (29070 bytes)

Imported modules

HUAWEI-MIB IF-MIB P-BRIDGE-MIB
SNMPv2-CONF SNMPv2-SMI SNMPv2-TC

Imported symbols

hwDatacomm InterfaceIndex EnabledStatus
OBJECT-GROUP MODULE-COMPLIANCE NOTIFICATION-GROUP
Integer32 Counter32 OBJECT-TYPE
MODULE-IDENTITY NOTIFICATION-TYPE TruthValue
RowStatus MacAddress TEXTUAL-CONVENTION

Defined Types

PortIndex  
Each port is uniquely identified by a port number. The port number ranges from 0 to 575.
TEXTUAL-CONVENTION    
  Integer32 0..575  

HwDldpPortEntry  
SEQUENCE    
  hwDldpPortIndex PortIndex
  hwDldpPortStateReset TruthValue
  hwDldpPortState INTEGER
  hwDldpPortLinkState INTEGER
  hwDldpResetStatistics TruthValue
  hwDldpRowStatus RowStatus

HwDldpNeighbourEntry  
SEQUENCE    
  hwDldpNeighbourMacAddr MacAddress
  hwDldpNeighbourPortIndex Integer32
  hwDldpNeighbourPortName OCTET STRING
  hwDldpNeighbourState INTEGER
  hwDldpNeighbourAgeTime Integer32

HwDldpIfEntry  
SEQUENCE    
  hwDldpIfIndex InterfaceIndex
  hwDldpIfStateReset TruthValue
  hwDldpIfState INTEGER
  hwDldpIfLinkState INTEGER
  hwDldpIfResetStatistics TruthValue
  hwDldpIfRowStatus RowStatus

HwDldpIfNeighbourEntry  
SEQUENCE    
  hwDldpIfNeighbourMacAddr MacAddress
  hwDldpIfNeighbourIfIndex Integer32
  hwDldpIfNeighbourPortName OCTET STRING
  hwDldpIfNeighbourState INTEGER
  hwDldpIfNeighbourAgeTime Integer32

HwDldpPortStatisticsEntry  
SEQUENCE    
  hwDldpPortStatisticsTx Counter32
  hwDldpPortStatisticsRxTotal Counter32
  hwDldpPortStatisticsRxError Counter32
  hwDldpPortStatisticsRxLoop Counter32
  hwDldpPortStatisticsRxValid Counter32
  hwDldpPortStatisticsRxAuthenFail Counter32

HwDldpIfStatisticsEntry  
SEQUENCE    
  hwDldpIfStatisticsTx Counter32
  hwDldpIfStatisticsRxTotal Counter32
  hwDldpIfStatisticsRxError Counter32
  hwDldpIfStatisticsRxLoop Counter32
  hwDldpIfStatisticsRxValid Counter32
  hwDldpIfStatisticsRxAuthenFail Counter32

Defined Values

hwDldpMIB 1.3.6.1.4.1.2011.5.25.173
This file is a DLDP-MIB. It provides the functions such as globally enabling or disabling the DLDP protocol, enabling the global alarm, clearing statistics on ports and configuring work mode.
MODULE-IDENTITY    

hwDldpObjects 1.3.6.1.4.1.2011.5.25.173.1
OBJECT IDENTIFIER    

hwDldpConfiguration 1.3.6.1.4.1.2011.5.25.173.1.1
OBJECT IDENTIFIER    

hwDldpEnable 1.3.6.1.4.1.2011.5.25.173.1.1.1
Globally enable or disable the DLDP configuration. If the hwDldpEnable is 1, DLDP is enabled. If the hwDldpEnable is 2, DLDP is disabled. By default, DLDP is disabled.
OBJECT-TYPE    
  EnabledStatus  

hwDldpUnidirectionalShutdown 1.3.6.1.4.1.2011.5.25.173.1.1.2
When the device discovers a one-way link, the shutdown mode of port. The modes include auto and manual. By default, DLDP is auto.
OBJECT-TYPE    
  INTEGER auto(1), manual(2)  

hwDldpWorkMode 1.3.6.1.4.1.2011.5.25.173.1.1.3
It configures the work mode of the DLDP protocol, including normal and enhanced mode. By default, the mode is enhanced.
OBJECT-TYPE    
  INTEGER normal(1), enhance(2)  

hwDldpAdvertInterval 1.3.6.1.4.1.2011.5.25.173.1.1.4
Global interval for sending advertisement packets for the DLDP configuration. By default, the interval is 5s.
OBJECT-TYPE    
  Integer32 1..100  

hwDelayDownTimer 1.3.6.1.4.1.2011.5.25.173.1.1.5
Global timeout of DelayDown timer. The value rangs from 1s to 5s, By default, the time is 1s.
OBJECT-TYPE    
  Integer32 1..5  

hwDldpAuthenMode 1.3.6.1.4.1.2011.5.25.173.1.1.6
Global authentication mode of the DLDP configuration. It has three authentication modes, including none, md5, simple, and sha. By default the authentication mode is none.
OBJECT-TYPE    
  INTEGER none(1), md5(2), simple(3), sha(4)  

hwDldpMd5Password 1.3.6.1.4.1.2011.5.25.173.1.1.7
Global md5 password for authentication when authentication is md5.
OBJECT-TYPE    
  OCTET STRING Size(1..24)  

hwDldpSimplePassword 1.3.6.1.4.1.2011.5.25.173.1.1.8
Global simple password for authentication when authentication is simple.
OBJECT-TYPE    
  OCTET STRING Size(1..16)  

hwDldpPortTable 1.3.6.1.4.1.2011.5.25.173.1.1.9
DLDP port configuration table.
OBJECT-TYPE    
  SEQUENCE OF  
    HwDldpPortEntry

hwDldpPortEntry 1.3.6.1.4.1.2011.5.25.173.1.1.9.1
Entries of the DLDP port configuration table.
OBJECT-TYPE    
  HwDldpPortEntry  

hwDldpPortIndex 1.3.6.1.4.1.2011.5.25.173.1.1.9.1.1
It describes enabled DLDP port index. Each port is uniquely identified by a port number. It ranges from 0 to 575.
OBJECT-TYPE    
  PortIndex  

hwDldpPortStateReset 1.3.6.1.4.1.2011.5.25.173.1.1.9.1.2
It describes the DLDP status of the reset port.
OBJECT-TYPE    
  TruthValue  

hwDldpPortState 1.3.6.1.4.1.2011.5.25.173.1.1.9.1.3
Port state has eight states, including initial, inactive, active, advertisement, probe, disable, delayDown, and loop.
OBJECT-TYPE    
  INTEGER initial(1), inactive(2), active(3), advertisement(4), probe(5), disable(6), delayDown(7), loop(8)  

hwDldpPortLinkState 1.3.6.1.4.1.2011.5.25.173.1.1.9.1.4
Port state has two modes, including up and down.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

hwDldpResetStatistics 1.3.6.1.4.1.2011.5.25.173.1.1.9.1.5
It clears the statistics of packets received and sent on the current port.
OBJECT-TYPE    
  TruthValue  

hwDldpRowStatus 1.3.6.1.4.1.2011.5.25.173.1.1.9.1.6
Operation of CreateAndGo can be used to create a new instance, and operation of Destroy be used to destroy an existent index. But these operations will not take effect if they are not activated by running the command of activating or setting mib node of hwDldpEnable.
OBJECT-TYPE    
  RowStatus  

hwDldpNeighbourTable 1.3.6.1.4.1.2011.5.25.173.1.1.10
DLDP Neighbour configuration table.
OBJECT-TYPE    
  SEQUENCE OF  
    HwDldpNeighbourEntry

hwDldpNeighbourEntry 1.3.6.1.4.1.2011.5.25.173.1.1.10.1
Entries of the DLDP Neighbour configuration table.
OBJECT-TYPE    
  HwDldpNeighbourEntry  

hwDldpNeighbourMacAddr 1.3.6.1.4.1.2011.5.25.173.1.1.10.1.1
When the activated port detects a neighbor, it can record the neighbor information, including MAC address of neighbor. The port may detect multiple neighbors.
OBJECT-TYPE    
  MacAddress  

hwDldpNeighbourPortIndex 1.3.6.1.4.1.2011.5.25.173.1.1.10.1.2
When the activated port detects a neighbor, it can record the port index of the neighbour.
OBJECT-TYPE    
  Integer32 0..65535  

hwDldpNeighbourPortName 1.3.6.1.4.1.2011.5.25.173.1.1.10.1.3
When the activated port detects a neighbor, it can record the port name of the neighbour.
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hwDldpNeighbourState 1.3.6.1.4.1.2011.5.25.173.1.1.10.1.4
When the activated port detects a neighbor, it can record the state of the neighbour, and its value includes unknown, one way, and two way.
OBJECT-TYPE    
  INTEGER unknown(1), oneWay(2), twoWay(3)  

hwDldpNeighbourAgeTime 1.3.6.1.4.1.2011.5.25.173.1.1.10.1.5
When the activated port detects a neighbor, it can record the aging time of the neighbor. The aging time is three times the interval for sending advertisement packets.
OBJECT-TYPE    
  Integer32 3..300  

hwDldpIfTable 1.3.6.1.4.1.2011.5.25.173.1.1.11
DLDP interface configuration table.
OBJECT-TYPE    
  SEQUENCE OF  
    HwDldpIfEntry

hwDldpIfEntry 1.3.6.1.4.1.2011.5.25.173.1.1.11.1
Entries of the DLDP interface configuration table.
OBJECT-TYPE    
  HwDldpIfEntry  

hwDldpIfIndex 1.3.6.1.4.1.2011.5.25.173.1.1.11.1.1
It describes enabled DLDP interface index. Each port is uniquely identified by a port number. It ranges from 0 to 62535.
OBJECT-TYPE    
  InterfaceIndex  

hwDldpIfStateReset 1.3.6.1.4.1.2011.5.25.173.1.1.11.1.2
It describes the DLDP status of the reset port.
OBJECT-TYPE    
  TruthValue  

hwDldpIfState 1.3.6.1.4.1.2011.5.25.173.1.1.11.1.3
Port state has eight states, including initial, inactive, active, advertisement, probe, disable, delayDown, and loop.
OBJECT-TYPE    
  INTEGER initial(1), inactive(2), active(3), advertisement(4), probe(5), disable(6), delayDown(7), loop(8)  

hwDldpIfLinkState 1.3.6.1.4.1.2011.5.25.173.1.1.11.1.4
Port state has two modes, including up and down.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

hwDldpIfResetStatistics 1.3.6.1.4.1.2011.5.25.173.1.1.11.1.5
It clears the statistics of packets received and sent on the current port.
OBJECT-TYPE    
  TruthValue  

hwDldpIfRowStatus 1.3.6.1.4.1.2011.5.25.173.1.1.11.1.6
Operation of CreateAndGo can be used to create a new instance, and operation of Destroy be used to destroy an existent index. But these operations will not take effect if they are not activated by running the command of activating or setting mib node of hwDldpEnable.
OBJECT-TYPE    
  RowStatus  

hwDldpIfNeighbourTable 1.3.6.1.4.1.2011.5.25.173.1.1.12
DLDP Neighbour configuration table.
OBJECT-TYPE    
  SEQUENCE OF  
    HwDldpIfNeighbourEntry

hwDldpIfNeighbourEntry 1.3.6.1.4.1.2011.5.25.173.1.1.12.1
Entries of the DLDP Neighbour configuration table.
OBJECT-TYPE    
  HwDldpIfNeighbourEntry  

hwDldpIfNeighbourMacAddr 1.3.6.1.4.1.2011.5.25.173.1.1.12.1.1
When the activated port detects a neighbor, it can record the neighbor information, including MAC address of neighbor. The port may detect multiple neighbors.
OBJECT-TYPE    
  MacAddress  

hwDldpIfNeighbourIfIndex 1.3.6.1.4.1.2011.5.25.173.1.1.12.1.2
When the activated port detects a neighbor, it can record the port index of the neighbour.
OBJECT-TYPE    
  Integer32 0..65535  

hwDldpIfNeighbourPortName 1.3.6.1.4.1.2011.5.25.173.1.1.12.1.3
When the activated port detects a neighbor, it can record the port name of the neighbour.
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hwDldpIfNeighbourState 1.3.6.1.4.1.2011.5.25.173.1.1.12.1.4
When the activated port detects a neighbor, it can record the state of the neighbour, and its value includes unknown, one way, and two way.
OBJECT-TYPE    
  INTEGER unknown(1), oneWay(2), twoWay(3)  

hwDldpIfNeighbourAgeTime 1.3.6.1.4.1.2011.5.25.173.1.1.12.1.5
When the activated port detects a neighbor, it can record the aging time of the neighbor. The aging time is three times the interval for sending advertisement packets.
OBJECT-TYPE    
  Integer32 3..300  

hwDldpShaPassword 1.3.6.1.4.1.2011.5.25.173.1.1.13
Global sha password for authentication when authentication is sha.
OBJECT-TYPE    
  OCTET STRING Size(1..16)  

hwDldpStatistics 1.3.6.1.4.1.2011.5.25.173.1.2
OBJECT IDENTIFIER    

hwDldpPortStatisticsTable 1.3.6.1.4.1.2011.5.25.173.1.2.1
DLDP port statics configuration table.
OBJECT-TYPE    
  SEQUENCE OF  
    HwDldpPortStatisticsEntry

hwDldpPortStatisticsEntry 1.3.6.1.4.1.2011.5.25.173.1.2.1.1
Entries of the table of the packets sent or received on the DLDP port.
OBJECT-TYPE    
  HwDldpPortStatisticsEntry  

hwDldpPortStatisticsTx 1.3.6.1.4.1.2011.5.25.173.1.2.1.1.1
It describes the number of packets sent on the activated port.
OBJECT-TYPE    
  Counter32  

hwDldpPortStatisticsRxTotal 1.3.6.1.4.1.2011.5.25.173.1.2.1.1.2
It describes the number of packets received on the activated port.
OBJECT-TYPE    
  Counter32  

hwDldpPortStatisticsRxError 1.3.6.1.4.1.2011.5.25.173.1.2.1.1.3
It describes the number of error packets received on the activated port.
OBJECT-TYPE    
  Counter32  

hwDldpPortStatisticsRxLoop 1.3.6.1.4.1.2011.5.25.173.1.2.1.1.4
It describes the number of loop packets received on the activated port.
OBJECT-TYPE    
  Counter32  

hwDldpPortStatisticsRxValid 1.3.6.1.4.1.2011.5.25.173.1.2.1.1.5
It describes the number of valid packets received on the activated port.
OBJECT-TYPE    
  Counter32  

hwDldpPortStatisticsRxAuthenFail 1.3.6.1.4.1.2011.5.25.173.1.2.1.1.6
It describes the number of authentication failure packets received on the activated port.
OBJECT-TYPE    
  Counter32  

hwDldpIfStatisticsTable 1.3.6.1.4.1.2011.5.25.173.1.2.2
DLDP port statics configuration table.
OBJECT-TYPE    
  SEQUENCE OF  
    HwDldpIfStatisticsEntry

hwDldpIfStatisticsEntry 1.3.6.1.4.1.2011.5.25.173.1.2.2.1
Entries of the table of the packets sent or received on the DLDP port.
OBJECT-TYPE    
  HwDldpIfStatisticsEntry  

hwDldpIfStatisticsTx 1.3.6.1.4.1.2011.5.25.173.1.2.2.1.1
It describes the number of packets sent on the activated port.
OBJECT-TYPE    
  Counter32  

hwDldpIfStatisticsRxTotal 1.3.6.1.4.1.2011.5.25.173.1.2.2.1.2
It describes the number of packets received on the activated port.
OBJECT-TYPE    
  Counter32  

hwDldpIfStatisticsRxError 1.3.6.1.4.1.2011.5.25.173.1.2.2.1.3
It describes the number of error packets received on the activated port.
OBJECT-TYPE    
  Counter32  

hwDldpIfStatisticsRxLoop 1.3.6.1.4.1.2011.5.25.173.1.2.2.1.4
It describes the number of loop packets received on the activated port.
OBJECT-TYPE    
  Counter32  

hwDldpIfStatisticsRxValid 1.3.6.1.4.1.2011.5.25.173.1.2.2.1.5
It describes the number of valid packets received on the activated port.
OBJECT-TYPE    
  Counter32  

hwDldpIfStatisticsRxAuthenFail 1.3.6.1.4.1.2011.5.25.173.1.2.2.1.6
It describes the number of authentication failure packets received on the activated port.
OBJECT-TYPE    
  Counter32  

hwDldpPortTrapObjects 1.3.6.1.4.1.2011.5.25.173.2
OBJECT IDENTIFIER    

hwDldpTrapInterfaceIndex 1.3.6.1.4.1.2011.5.25.173.2.1
It describes the interface index of the activated port that detected one way or found that two way is resumed.
OBJECT-TYPE    
  InterfaceIndex  

hwDldpTrapIfName 1.3.6.1.4.1.2011.5.25.173.2.2
It describes the interface name of the activated port that detected one way or found that two way is resumed.
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwDldpTrapFaultReason 1.3.6.1.4.1.2011.5.25.173.2.3
It describes the reason interface fault.
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwDldpTraps 1.3.6.1.4.1.2011.5.25.173.3
OBJECT IDENTIFIER    


hwDldpLinkResume 1.3.6.1.4.1.2011.5.25.173.3.2
Notify the NMS that the DLDP detected that unidirectional link was resumed. The hwDldpTrapInterfaceIndex node is interface index.
NOTIFICATION-TYPE    

hwDldpLoopDetect 1.3.6.1.4.1.2011.5.25.173.3.3
Notify the NMS that the DLDP detected Loop State. The hwDldpTrapInterfaceIndex node is the interface index.
NOTIFICATION-TYPE    

hwDldpLoopResume 1.3.6.1.4.1.2011.5.25.173.3.4
Notify the NMS that the DLDP detected Loop State was resumed. The hwDldpTrapInterfaceIndex node is interface index.
NOTIFICATION-TYPE    

hwDldpConformance 1.3.6.1.4.1.2011.5.25.173.4
OBJECT IDENTIFIER    

hwDldpCompliances 1.3.6.1.4.1.2011.5.25.173.4.1
OBJECT IDENTIFIER    

hwDldpCompliance 1.3.6.1.4.1.2011.5.25.173.4.1.1
The compliance statement for SNMP entities which implement the HUAWEI-DLDP-MIB.
MODULE-COMPLIANCE    

hwDldpGroups 1.3.6.1.4.1.2011.5.25.173.4.2
OBJECT IDENTIFIER    

hwDldpConfigGroup 1.3.6.1.4.1.2011.5.25.173.4.2.1
The collection of objects which are used to configure the DLDP implementation behavior. This group is mandatory for agents which implement the DLDP.
OBJECT-GROUP    

hwDldpStatisticsGroup 1.3.6.1.4.1.2011.5.25.173.4.2.2
The collection of objects which are used to represent DLDP statistics. This group is mandatory for agents which implement the DLDP and have the capability of receiving and transmitting DLDP frames.
OBJECT-GROUP    

hwDldpPortGroup 1.3.6.1.4.1.2011.5.25.173.4.2.3
The collection of objects indicates the information of port.
OBJECT-GROUP    

hwDldpPortTrapGroup 1.3.6.1.4.1.2011.5.25.173.4.2.4
The collection of objects indicates that the activated port index detected one way or found that two way is resumed.
OBJECT-GROUP    

hwDldpTrapGroup 1.3.6.1.4.1.2011.5.25.173.4.2.5
The collection of notifications used to indicate that the HUAWEI-DLDP-MIB data is consistent and indicate the general status information. This group is mandatory for agents which implement the DLDP and have the capability of receiving DLDP frames.
NOTIFICATION-GROUP