HUAWEI-DHCP-PROXY-MIB

File: HUAWEI-DHCP-PROXY-MIB.mib (115951 bytes)

Imported modules

HUAWEI-MIB SNMPv2-SMI SNMPv2-TC
HUAWEI-VLAN-MIB IF-MIB HUAWEI-ADSL-MIB

Imported symbols

huaweiMgmt IpAddress OBJECT-TYPE
MODULE-IDENTITY Unsigned32 Integer32
Counter32 Gauge32 NOTIFICATION-TYPE
RowStatus MacAddress TruthValue
DateAndTime hwVlanID hwVlanIndex
ifIndex hwAdsllinePvcVpi hwAdslLinePvcVci

Defined Types

HwDhcpGroupEntry  
SEQUENCE    
  hwDhcpGroupID Integer32
  hwIpDhcpServerAddress1 IpAddress
  hwIpDhcpServerAddress2 IpAddress
  hwDhcpRowStatus RowStatus
  hwIpDhcpCurrentServerAddress IpAddress
  hwIpDhcpServerAddress3 IpAddress
  hwIpDhcpServerAddress4 IpAddress

HwDhcpSecurityEntry  
SEQUENCE    
  hwDhcpClientIpAddress IpAddress
  hwDhcpClientMacAddress MacAddress
  hwDhcpClientProperty INTEGER
  hwDhcpClientRowStatus RowStatus

HwDhcpToL3IfEntry  
SEQUENCE    
  hwDhcpToL3VlanIfIndex Integer32
  hwDhcpToL3GroupId Integer32
  hwDhcpToL3AddressCheck INTEGER
  hwDhcpToL3RowStatus RowStatus

HwDhcpPortPvcEntry  
SEQUENCE    
  hwDhcpPortPvcOption82AdminStatus TruthValue
  hwDhcpPortPvcIPBindAdminStatus TruthValue
  hwDhcpPortPvcRowStatus RowStatus

HwDhcpPortEntry  
SEQUENCE    
  hwDhcpPortOption82AdminStatus TruthValue
  hwDhcpPortUpLinkStatus TruthValue
  hwDhcpPortRowStatus RowStatus

HwDhcpDomainEntry  
SEQUENCE    
  hwDhcpDomainName OCTET STRING
  hwDhcpDomainGroupId Integer32
  hwDhcpDomainRowStatus RowStatus
  hwDhcpDomainGatewayLearn INTEGER

HwDhcpMacRangeEntry  
SEQUENCE    
  hwDhcpMacRangeName OCTET STRING
  hwDhcpMacRangeStart MacAddress
  hwDhcpMacRangeEnd MacAddress
  hwDhcpMacRangeGroupId Integer32
  hwDhcpMacRangeRowStatus RowStatus

HwDhcpDomainGatewayEntry  
SEQUENCE    
  hwDhcpDomainGatewayVlanIfIndex Integer32
  hwDhcpDomainGatewayDmName OCTET STRING
  hwDhcpDomainGateway IpAddress
  hwDhcpDomainGatewayRowStatus RowStatus
  hwDhcpDomainGateway2 IpAddress
  hwDhcpDomainGateway3 IpAddress

HwDhcpMacGatewayEntry  
SEQUENCE    
  hwDhcpMacGatewayVlanIfIndex Integer32
  hwDhcpMacGatewayMacName OCTET STRING
  hwDhcpMacGateway IpAddress
  hwDhcpMacGatewayRowStatus RowStatus

HwDhcpOption82StatisticsEntry  
SEQUENCE    
  hwDhcpOption82ReceiveUntrust Counter32
  hwDhcpOption82ReceiveOverLength Counter32
  hwDhcpOption82ReceiveDiscover Counter32
  hwDhcpOption82ReceiveOffer Counter32
  hwDhcpOption82ReceiveRequest Counter32
  hwDhcpOption82ReceiveDecline Counter32
  hwDhcpOption82ReceiveAck Counter32
  hwDhcpOption82ReceiveNak Counter32
  hwDhcpOption82ReceiveRelease Counter32
  hwDhcpOption82ReceiveInform Counter32
  hwDhcpOption82StatisticsClear INTEGER
  hwDhcpOption82ReceiveOverMaxOption82Size Counter32

HwDhcpSuboptionEntry  
SEQUENCE    
  hwDhcpSuboptionIndex Integer32
  hwDhcpSuboptionStatus TruthValue

HwDhcpServerSelectModeByVlanEntry  
SEQUENCE    
  hwDhcpServerSelectModeByVlan INTEGER
  hwDhcpServerSelectModeByVlanRowStatus RowStatus

HwDhcpUserEntry  
SEQUENCE    
  hwDhcpUserIndex Integer32
  hwDhcpUserPortIndex Integer32
  hwDhcpUserFlowID Integer32
  hwDhcpUserVlanID Integer32
  hwDhcpUserIpAddress IpAddress
  hwDhcpUserMACAddress MacAddress
  hwDhcpUserServerIpAddress IpAddress
  hwDhcpUserLeaseTime Integer32
  hwDhcpUserRowStatus RowStatus

HwDhcpDomainServerInVlanEntry  
SEQUENCE    
  hwDhcpDomainServerInVlan Integer32
  hwDhcpDomainServerInVlanRowStatus RowStatus

HwDhcpMacServerInVlanEntry  
SEQUENCE    
  hwDhcpMacServerInVlan Integer32
  hwDhcpMacServerInVlanRowStatus RowStatus

HwDhcpSmltEntry  
SEQUENCE    
  hwDhcpSmltIndex Integer32
  hwDhcpSmltServicePortId Integer32
  hwDhcpSmltOption60 OCTET STRING
  hwDhcpSmltOverTime Integer32
  hwDhcpSmltResult Gauge32
  hwDhcpSmltStartTime DateAndTime
  hwDhcpSmltEndTime DateAndTime
  hwDhcpSmltUserIp IpAddress
  hwDhcpSmltSubNetMask IpAddress
  hwDhcpSmltDhcpServerIp IpAddress
  hwDhcpSmltDnsServerIp IpAddress
  hwDhcpSmltDnsServerName OCTET STRING
  hwDhcpSmltSecondaryDnsServerIp IpAddress
  hwDhcpSmltGatewayIp IpAddress
  hwDhcpSmltRowStatus RowStatus

HwDhcpMessagesStatisticsEntry  
SEQUENCE    
  hwDhcpL3Option82ReceiveUntrust Counter32
  hwDhcpL3Option82ReceiveOverLength Counter32
  hwDhcpL3Option82ReceiveOverMaxMessagesSize Counter32
  hwDhcpMessagesReceiveOffer Counter32
  hwDhcpMessagesReceiveAck Counter32
  hwDhcpMessagesReceiveNak Counter32
  hwDhcpMessagesReceiveDecline Counter32
  hwDhcpMessagesReceiveDiscover Counter32
  hwDhcpMessagesReceiveInform Counter32
  hwDhcpMessagesReceiveRelease Counter32
  hwDhcpMessagesReceiveRequest Counter32
  hwDhcpMessagesReceiveForceRenew Counter32
  hwDhcpMessagesReceiveProxyPktAck Counter32
  hwDhcpMessagesReceiveProxyPktRelease Counter32
  hwDhcpMACConflictNum Counter32
  hwDhcpSearchDownFailNum Counter32
  hwDhcpUserNotZeroGiaddrPktNum Counter32
  hwDhcpMessagesStatisticsClear INTEGER

HwDhcpFlowStatisticsEntry  
SEQUENCE    
  hwDhcpFlowStatisticsIndex Unsigned32
  hwDhcpFlowStatisticsRowStatus RowStatus
  hwDhcpFlowStatisticsOperMode INTEGER
  hwDhcpFlowStatisticsReceiveDiscover Unsigned32
  hwDhcpFlowStatisticsReceiveOffer Unsigned32
  hwDhcpFlowStatisticsReceiveRequest Unsigned32
  hwDhcpFlowStatisticsReceiveDecline Unsigned32
  hwDhcpFlowStatisticsReceiveAck Unsigned32
  hwDhcpFlowStatisticsReceiveNak Unsigned32
  hwDhcpFlowStatisticsReceiveRelease Unsigned32
  hwDhcpFlowStatisticsReceiveInform Unsigned32
  hwDhcpFlowStatisticsReceiveRenew Unsigned32
  hwDhcpFlowStatisticsSendDiscover Unsigned32
  hwDhcpFlowStatisticsSendOffer Unsigned32
  hwDhcpFlowStatisticsSendRequest Unsigned32
  hwDhcpFlowStatisticsSendDecline Unsigned32
  hwDhcpFlowStatisticsSendAck Unsigned32
  hwDhcpFlowStatisticsSendNak Unsigned32
  hwDhcpFlowStatisticsSendRelease Unsigned32
  hwDhcpFlowStatisticsSendInform Unsigned32
  hwDhcpFlowStatisticsSendRenew Unsigned32
  hwDhcpFlowStatisticsReceiveUnknownType Unsigned32
  hwDhcpFlowStatisticsTagTooLong Unsigned32
  hwDhcpFlowStatisticsFrameTooLong Unsigned32
  hwDhcpFlowStatisticsReceiveUntrust Unsigned32
  hwDhcpFlowStatisticsReceiveWithGiaddr Unsigned32

Defined Values

hwDhcpProxy 1.3.6.1.4.1.2011.5.18
The MIB is used for defining Huawei's DHCP attribute. It includes DHCP L3 Relay, DHCP Proxy, DHCP Option82, DHCP User Log, and DHCP Simulation.
MODULE-IDENTITY    

hwDhcpMibObject 1.3.6.1.4.1.2011.5.18.1
OBJECT IDENTIFIER    

hwDhcpGroupTable 1.3.6.1.4.1.2011.5.18.1.1
Describes the DHCP server group, including IP addresses of the primary DHCP server and secondary server in each group. It supports the create, modify, delete, and query operations. The index of this table is hwDhcpGroupID.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwDhcpGroupEntry

hwDhcpGroupEntry 1.3.6.1.4.1.2011.5.18.1.1.1
Describes the DHCP server group, including IP addresses of the primary DHCP server and secondary server in each group. It supports the create, modify, delete, and query operations. The index of this entry is hwDhcpGroupID.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwDhcpGroupEntry  

hwDhcpGroupID 1.3.6.1.4.1.2011.5.18.1.1.1.1
Indicates the index of the DHCP server group.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..19  

hwIpDhcpServerAddress1 1.3.6.1.4.1.2011.5.18.1.1.1.2
Indicates the IP address of the first server in the DHCP server group. It must be a valid unicast IP address and must be different from existing IP addresses in other server groups.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwIpDhcpServerAddress2 1.3.6.1.4.1.2011.5.18.1.1.1.3
Indicates the IP address of the second server in the DHCP server group. It must be a valid unicast IP address, must be different from existing IP addresses in other server groups, and must be different from hwIpDhcpServerAddress1. When hwIpDhcpServerAddress1 is not configured, hwIpDhcpServerAddress2 cannot be configured.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwDhcpRowStatus 1.3.6.1.4.1.2011.5.18.1.1.1.4
Row status, used for configuring the DHCP server group. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. createAndGo(4) -create a DHCP server group 3. destroy(6) -delete a DHCP server group To create a DHCP server group, specify the index and leaf hwIpDhcpServerAddress1 (other leaves are optional), set hwDhcpRowStatus to createAndGo, and perform the set operation. To modify a DHCP server group, specify the index and leaf hwIpDhcpServerAddress1 (other leaves are optional) and perform the set operation. To delete a DHCP server group, specify index hwDhcpGroupID, set hwDhcpRowStatus to destroy(6), and perform the set operation. In the query operation, the value of this leaf is always active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwIpDhcpCurrentServerAddress 1.3.6.1.4.1.2011.5.18.1.1.1.5
Indicates the IP address of the current server in the DHCP server group. It is a read-only leaf and is meaningful only when the DHCP server works in the backup mode. If the server does not work in the backup mode, it is 0.0.0.0 by default.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwIpDhcpServerAddress3 1.3.6.1.4.1.2011.5.18.1.1.1.6
Indicates the IP address of the third server in the DHCP server group. It must be a valid unicast IP address, must be different from existing IP addresses in other server groups, and must be different from hwIpDhcpServerAddress1 or hwIpDhcpServerAddress2. When hwIpDhcpServerAddress1 and hwIpDhcpServerAddress2 are not configured, hwIpDhcpServerAddress3 cannot be configured.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwIpDhcpServerAddress4 1.3.6.1.4.1.2011.5.18.1.1.1.7
Indicates the IP address of the fourth server in the DHCP server group. It must be a valid unicast IP address, must be different from existing IP addresses in other server groups, and must be different from hwIpDhcpServerAddress1, hwIpDhcpServerAddress2, or hwIpDhcpServerAddress3. When hwIpDhcpServerAddress1, hwIpDhcpServerAddress2, and hwIpDhcpServerAddress3 are not configured, hwIpDhcpServerAddress4 cannot be configured.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwDhcpSecurityTable 1.3.6.1.4.1.2011.5.18.1.2
A table containing the information of dhcp security. If security feature is supported by DHCP, add/delete table item of the user address, whose IP is the index. dhcp relay records in the table the IP address and MAC address of the legal user who acquire the IP address through relay. Through this table, the information of legal users can be queried. Moreover, in order to meet the needs of users to configure fixed IP address. This table enables the information configuration of the legal user with a fixed IP address. Specify the IP address, MAC address and the property of the static/dynamic address to implement the create operation. The index of this table is hwDhcpClientIpAddress.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwDhcpSecurityEntry

hwDhcpSecurityEntry 1.3.6.1.4.1.2011.5.18.1.2.1
A table containing the information of dhcp security. If security feature is supported by DHCP, add/delete table item of the user address, whose IP is the index. dhcp relay records in the table the IP address and MAC address of the legal user who acquire the IP address through relay. Through this table, the information of legal users can be queried. Moreover, in order to meet the needs of users to configure fixed IP address. This table enables the information configuration of the legal user with a fixed IP address. Specify the IP address, MAC address and the property of the static/dynamic address to implement the create operation. The index of this entry is hwDhcpClientIpAddress.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwDhcpSecurityEntry  

hwDhcpClientIpAddress 1.3.6.1.4.1.2011.5.18.1.2.1.1
The client IP address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwDhcpClientMacAddress 1.3.6.1.4.1.2011.5.18.1.2.1.2
The client MAC address.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

hwDhcpClientProperty 1.3.6.1.4.1.2011.5.18.1.2.1.3
Property of client. Options: 1. static(1) -indicates client property is static 2. dynamic(2) -indicates client property is dynamic
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER static(1), dynamic(2)  

hwDhcpClientRowStatus 1.3.6.1.4.1.2011.5.18.1.2.1.4
Status of this table's entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwDhcpToL3IfTable 1.3.6.1.4.1.2011.5.18.1.3
Describes the binding between the VLAN interface and the DHCP server group. It supports the create, query, and modify operations. The index of this table is hwDhcpToL3VlanIfIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwDhcpToL3IfEntry

hwDhcpToL3IfEntry 1.3.6.1.4.1.2011.5.18.1.3.1
Describes the binding between the VLAN interface and the DHCP server group. It supports the create, query, and modify operations. The index of this entry is hwDhcpToL3VlanIfIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwDhcpToL3IfEntry  

hwDhcpToL3VlanIfIndex 1.3.6.1.4.1.2011.5.18.1.3.1.1
Indicates binding to the VLAN ID of the DHCP server group. It uses hwVlanInterfaceID of hwVlanInterfaceTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4093  

hwDhcpToL3GroupId 1.3.6.1.4.1.2011.5.18.1.3.1.2
Indicates the corresponding DHCP server group of the VLAN interface. Range: 0-20 In the configuration, if the value of hwDhcpToL3GroupId is in the range of 0-19, ensure that the server group corresponding to this ID exists. Value 20 of hwDhcpToL3GroupId indicates unbinding. In the query, if this interface is not bound to any server group, value 20 of hwDhcpToL3GroupId is returned.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..20  

hwDhcpToL3AddressCheck 1.3.6.1.4.1.2011.5.18.1.3.1.3
If dhcp security check enabled for this vlan virtual interface. By default, it is disabled. Options: 1. enabled(1) -indicates dhcp security check is enabled 2. disabled(2) -indicates dhcp security check is disabled
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

hwDhcpToL3RowStatus 1.3.6.1.4.1.2011.5.18.1.3.1.4
Indicates the row status, used to configure the corresponding DHCP server group of the VLAN interface. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. createAndGo(4) -create a binding between the VLAN interface and the DHCP server group 3. destroy(6) -delete a binding between the VLAN interface and the DHCP server group Creates the binding between the VLAN interface and the DHCP server group. Specify the index and hwDhcpToL3GroupId, set hwDhcpToL3RowStatus to createAndGo(4), and perform the set operation. In the query operation, the value of this leaf is always active(1). Modifies the binding between the VLAN interface and the DHCP server group. Specify the index and hwDhcpToL3GroupId, set hwDhcpToL3RowStatus to active(1), and perform the set operation. Value 20 of hwDhcpToL3GroupId indicates unbinding. Deletes the binding between the VLAN interface and the DHCP server group, Specify the index and hwDhcpToL3GroupId, set hwDhcpToL3RowStatus to destroy(6), and perform the set operation.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwDhcpPortPvcTable 1.3.6.1.4.1.2011.5.18.1.4
Indicates DHCP pvc supported port management feature. The indexes of this table are ifIndex, hwAdsllinePvcVpi and hwAdslLinePvcVci.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwDhcpPortPvcEntry

hwDhcpPortPvcEntry 1.3.6.1.4.1.2011.5.18.1.4.1
Indicates DHCP pvc supported port management feature. The indexes of this entry are ifIndex, hwAdsllinePvcVpi and hwAdslLinePvcVci.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwDhcpPortPvcEntry  

hwDhcpPortPvcOption82AdminStatus 1.3.6.1.4.1.2011.5.18.1.4.1.1
DHCP Option82 on pvc of port administer state: true(enable)/false(disable),the default is false. Options: 1. true(1) -indicates DHCP Option82 is on 2. false(2) -indicates DHCP Option82 is off
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hwDhcpPortPvcIPBindAdminStatus 1.3.6.1.4.1.2011.5.18.1.4.1.2
IP Binding on pvc of port administer state: true(enable)/false(disable),the default is false. Options: 1. true(1) -indicates IP Binding is enabled 2. false(2) -indicates IP Binding is disabled
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hwDhcpPortPvcRowStatus 1.3.6.1.4.1.2011.5.18.1.4.1.3
Row status. Add or delete a table item. Options: 1. active(1) -indicates query operation 2. createAndGo(4) -indicates creating operation 3. destroy(6) -indicates deleting operation
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwDhcpPortTable 1.3.6.1.4.1.2011.5.18.1.5
Indicates DHCP port management feature. The index of this table is ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwDhcpPortEntry

hwDhcpPortEntry 1.3.6.1.4.1.2011.5.18.1.5.1
Indicates DHCP port management feature. The index of this entry is ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwDhcpPortEntry  

hwDhcpPortOption82AdminStatus 1.3.6.1.4.1.2011.5.18.1.5.1.1
DHCP Option82 on port administer state: true(enable)/false(disable),the default is false. Options: 1. true(1) -indicates DHCP Option82 is on 2. false(2) -indicates DHCP Option82 is off
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hwDhcpPortUpLinkStatus 1.3.6.1.4.1.2011.5.18.1.5.1.2
Up-link administer state, only a port on main board can be an up-link; true(yes)/false(no),the default is true. Options: 1. true(1) -indicates only a port on main board can be an up-link 2. false(2) -indicates not only a port on main board can be an up-link
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hwDhcpPortRowStatus 1.3.6.1.4.1.2011.5.18.1.5.1.3
Row status. Add or delete a table item.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwDhcpDomainTable 1.3.6.1.4.1.2011.5.18.1.6
Describes the DHCP domain information in the DHCP option 60 mode. It supports the query, create, modify, and delete operations. The index of this table is hwDhcpDomainName.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwDhcpDomainEntry

hwDhcpDomainEntry 1.3.6.1.4.1.2011.5.18.1.6.1
Describes the DHCP domain information in the DHCP option 60 mode. It supports the query, create, modify, and delete operations. The index of this entry is hwDhcpDomainName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwDhcpDomainEntry  

hwDhcpDomainName 1.3.6.1.4.1.2011.5.18.1.6.1.1
Indicates the DHCP domain name, which is used with the option 60 field in the user packets to differentiate various types of users in DHCP option 60 mode. Range: 1-32 characters The format is character string length+character ASCII length. For example, the length of 'hwdomain' is 8 and its corresponding octet string is 8.104.119.100.111.109.97.105.110.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

hwDhcpDomainGroupId 1.3.6.1.4.1.2011.5.18.1.6.1.2
Indicates the corresponding DHCP server group of the domain. It uses hwDhcpGroupID in hwDhcpGroupTable. Range: 0-20 0-19 indicates the ID of the server group; 20 indicates not binding with any server group.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..20  

hwDhcpDomainRowStatus 1.3.6.1.4.1.2011.5.18.1.6.1.3
Row status, used for configuring the DHCP domain name. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. createAndGo(4) -create a DHCP domain name 3. destroy(6) -delete a DHCP domain name Create a DHCP domain name, specify hwDhcpDomainName as the index, set hwDhcpDomainRowStatus to createAndGo(4), and perform the set operation. hwDhcpDomainGroupId is used to bind to a domain name or a DHCP server group. It is an optional leaf. In the query operation, the value of this leaf is always active(1). When modifying or configuring hwDhcpDomainGroupId, specify hwDhcpDomainName and hwDhcpDomainGroupId and perform the set operation. When deleting a DHCP domain name, specify hwDhcpDomainName, set hwDhcpDomainRowStatus to destroy(6), and perform the set operation.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwDhcpDomainGatewayLearn 1.3.6.1.4.1.2011.5.18.1.6.1.4
Indicates the function of automatically learning the relay IP addresses of the DHCP packets that belong to this domain. Data type:INTEGER Options: 1. enable(1) -enable the IP address learning function for the DHCP gateway 2. disable(2) -disable the IP address learning function for the DHCP gateway Access right: read-write Default: disable(2)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwDhcpMacRangeTable 1.3.6.1.4.1.2011.5.18.1.7
Describes the DHCP MAC-range information in the DHCP MAC-range mode. It supports the query, create, modify, and delete operations. The index of this table is hwDhcpMacRangeName.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwDhcpMacRangeEntry

hwDhcpMacRangeEntry 1.3.6.1.4.1.2011.5.18.1.7.1
Describes the DHCP MAC-range information in the DHCP MAC-range mode. It supports the query, create, modify, and delete operations. The index of this entry is hwDhcpMacRangeName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwDhcpMacRangeEntry  

hwDhcpMacRangeName 1.3.6.1.4.1.2011.5.18.1.7.1.1
DHCP MAC-range, used with the user MAC addresses to differentiate various types of users in DHCP MAC-range mode. Range: 1-32 characters For example, the index of 'mran' is 4.109.114.97.110.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

hwDhcpMacRangeStart 1.3.6.1.4.1.2011.5.18.1.7.1.2
Indicates the start address of the MAC-range, which must be a valid unicast MAC address. The format is a 6-byte hexadecimal character string, for example, 0x00 0xe0 0xfc 0x11 0x00 0x00.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

hwDhcpMacRangeEnd 1.3.6.1.4.1.2011.5.18.1.7.1.3
Indicates the end address of the MAC-range, which must be a valid unicast MAC address. hwDhcpMacRangeEnd must be equal to or larger than hwDhcpMacRangeStart. The format is a 6-byte hexadecimal character string, for example, 0x00 0xe0 0xfc 0x11 0x00 0x00.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

hwDhcpMacRangeGroupId 1.3.6.1.4.1.2011.5.18.1.7.1.4
Indicates the DHCP server group relevant to the MAC-range.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..20  

hwDhcpMacRangeRowStatus 1.3.6.1.4.1.2011.5.18.1.7.1.5
Row status, used to create a MAC-range, modify a MAC-range, and bind a MAC-range to a DHCP server group. Options: 1. active(1) -in the query operation, the value of this leaf is always active(1). 2. createAndGo(4) -create a MAC-range to a DHCP server group 3. destroy(6) -delete a MAC-range to a DHCP server group To create a MAC-range, hwDhcpMacRangeName must be specified. At the same time, hwDhcpMacRangeStart and hwDhcpMacRangeEnd can be selected and configured. In addition, hwDhcpMacRangeGroupId can also be configured. Finally, set hwDhcpMacRangeRowStatus to createAndGo(4) and perform the set operation. The restrictions on the modify and create operations are the same, but the row status need not be bound. In the query operation, the value of this leaf is always active(1). In the delete operation, hwDhcpMacRangeName needs to be specified. Set hwDhcpDomainRowStatus to destroy(6) and perform the set operation.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwDhcpDomainGatewayTable 1.3.6.1.4.1.2011.5.18.1.8
Describes the binding between the DHCP domain and gateway corresponding to the VLAN interface in the DHCP option 60 mode. It supports the modify and query operations. The indexes of this table are hwDhcpDomainGatewayVlanIfIndex and hwDhcpDomainGatewayDmName.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwDhcpDomainGatewayEntry

hwDhcpDomainGatewayEntry 1.3.6.1.4.1.2011.5.18.1.8.1
Describes the binding between the DHCP domain and gateway corresponding to the VLAN interface in the DHCP option 60 mode. It supports the modify and query operations. The indexes of this entry are hwDhcpDomainGatewayVlanIfIndex and hwDhcpDomainGatewayDmName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwDhcpDomainGatewayEntry  

hwDhcpDomainGatewayVlanIfIndex 1.3.6.1.4.1.2011.5.18.1.8.1.1
Indicates the VLAN ID to be bound to the gateway. Range: 1-4093
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4093  

hwDhcpDomainGatewayDmName 1.3.6.1.4.1.2011.5.18.1.8.1.2
DHCP domain name. Range: 1-32 characters The format is character string length+character ASCII length. For example, the length of 'hwdomain' is 8 and its corresponding octet string is 8.104.119.100.111.109.97.105.110.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

hwDhcpDomainGateway 1.3.6.1.4.1.2011.5.18.1.8.1.3
Indicates the gateway IP address bound to the VLAN interface in the DHCP domain.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwDhcpDomainGatewayRowStatus 1.3.6.1.4.1.2011.5.18.1.8.1.4
Row status, used for binding a VLAN interface to a DHCP domain or gateway. Options: 1. active(1) -indicates query operation When modifying the binding between the DHCP domain and the gateway, configure hwDhcpDomainGateway to the gateway IP address to be bound to. Make sure that the IP address exists under the interface, and it can be the primary or secondary IP address of the interface. If the value is 0.0.0.0, it indicates that no gateway is bound to. In the query operation, the value of this leaf is always active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwDhcpDomainGateway2 1.3.6.1.4.1.2011.5.18.1.8.1.5
Indicates the second gateway IP address bound to the VLAN interface in the DHCP domain.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

hwDhcpDomainGateway3 1.3.6.1.4.1.2011.5.18.1.8.1.6
Indicates the third gateway IP address bound to the VLAN interface in the DHCP domain.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

hwDhcpMacGatewayTable 1.3.6.1.4.1.2011.5.18.1.9
Describes the binding between the VLAN interface and the gateway in the DHCP MAC-range mode. It supports the query and modify operations. The indexes of this table are hwDhcpMacGatewayVlanIfIndex and hwDhcpMacGatewayMacName.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwDhcpMacGatewayEntry

hwDhcpMacGatewayEntry 1.3.6.1.4.1.2011.5.18.1.9.1
Describes the binding between the VLAN interface and the gateway in the DHCP MAC-range mode. It supports the query and modify operations. The indexes of this entry are hwDhcpMacGatewayVlanIfIndex and hwDhcpMacGatewayMacName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwDhcpMacGatewayEntry  

hwDhcpMacGatewayVlanIfIndex 1.3.6.1.4.1.2011.5.18.1.9.1.1
Indicates the VLAN ID to be bound to. Range: 1-4093
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4093  

hwDhcpMacGatewayMacName 1.3.6.1.4.1.2011.5.18.1.9.1.2
Indicates the name of the DHCP MAC-range. It uses hwDhcpMacRangeName in hwDhcpMacRangeTable. Range: 1-32 characters
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

hwDhcpMacGateway 1.3.6.1.4.1.2011.5.18.1.9.1.3
Indicates the gateway IP address bound to the VLAN interface in the DHCP MAC-range. It uses hwVlanIpAddress (primary IP address) in hwVlanInterfaceTable. Make sure that the IP address exists under the interface, and it can be the primary or secondary IP address of the interface. If the value is 0.0.0.0, it indicates that no gateway is bound to.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwDhcpMacGatewayRowStatus 1.3.6.1.4.1.2011.5.18.1.9.1.4
Row status, used to bind a MAC-range to the gateway IP address. In the modify operation, specify hwDhcpMacGateway and perform the set operation. In the query operation, the value of this leaf is always active(1). Options: 1. active(1) -in the query operation, the value of this leaf is always active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwDhcpOption82StatisticsTable 1.3.6.1.4.1.2011.5.18.1.10
Describes the statistics of various DHCP packets received on the DHCP L2 relay. It supports the query and set operations. The index of this table is ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwDhcpOption82StatisticsEntry

hwDhcpOption82StatisticsEntry 1.3.6.1.4.1.2011.5.18.1.10.1
Describes the statistics of various DHCP packets received on the DHCP L2 relay. It supports the query and set operations. The index of this entry is ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwDhcpOption82StatisticsEntry  

hwDhcpOption82ReceiveUntrust 1.3.6.1.4.1.2011.5.18.1.10.1.1
Indicates the total number of DHCP packets containing the untrust option 82 information. Range: 0-4294967295
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwDhcpOption82ReceiveOverLength 1.3.6.1.4.1.2011.5.18.1.10.1.2
Indicates the total number of DHCP packets that exceed the maximum packet length after option 82 is added. Range: 0-4294967295
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwDhcpOption82ReceiveDiscover 1.3.6.1.4.1.2011.5.18.1.10.1.3
Indicates the total number of received DHCP discover packets. Range: 0-4294967295
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwDhcpOption82ReceiveOffer 1.3.6.1.4.1.2011.5.18.1.10.1.4
Indicates the total number of received DHCP offer packets. Range: 0-4294967295
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwDhcpOption82ReceiveRequest 1.3.6.1.4.1.2011.5.18.1.10.1.5
Indicates the total number of received DHCP request packets. Range: 0-4294967295
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwDhcpOption82ReceiveDecline 1.3.6.1.4.1.2011.5.18.1.10.1.6
Indicates the total number of received DHCP decline packets. Range: 0-4294967295
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwDhcpOption82ReceiveAck 1.3.6.1.4.1.2011.5.18.1.10.1.7
Indicates the total number of received DHCP ACK packets. Range: 0-4294967295
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwDhcpOption82ReceiveNak 1.3.6.1.4.1.2011.5.18.1.10.1.8
Indicates the total number of received DHCP NAK packets. Range: 0-4294967295
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwDhcpOption82ReceiveRelease 1.3.6.1.4.1.2011.5.18.1.10.1.9
Indicates the total number of received DHCP release packets. Range: 0-4294967295
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwDhcpOption82ReceiveInform 1.3.6.1.4.1.2011.5.18.1.10.1.10
Indicates the total number of received DHCP inform packets. Range: 0-4294967295
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwDhcpOption82StatisticsClear 1.3.6.1.4.1.2011.5.18.1.10.1.11
Resets the statistics of DHCP packets. Set it to clear(1) and perform the set operation. Options: 1. clear(1) -resets the statistics of DHCP packets
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(1)  

hwDhcpOption82ReceiveOverMaxOption82Size 1.3.6.1.4.1.2011.5.18.1.10.1.12
Indicates the total number of received DHCP packets that exceed the maximum option 82 length after the option 82 information is added.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwDhcpOption82Status 1.3.6.1.4.1.2011.5.18.1.16
Indicates the status of the global DHCP Option82 switch. Options: 1. enable(1) -indicates adding a vendor tag to or deleting it from the DHCP packet on the device. 2. disable(2) -indicates not adding a vendor tag to or deleting it from the DHCP packet on the device. 3. forward(3) -indicates not processing the vendor tag of the DHCP packet. In this case, the packet is transparently transmitted. 4. rebuild(4) -indicates rebuild the vendor tag from the ONU device,to meet the TR-156 needs. Default: disable(2)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), forward(3), rebuild(4)  

hwDhcpRelayMode 1.3.6.1.4.1.2011.5.18.1.17
Describes the current DHCP forwarding mode of the system. Options: 1. layer2(3) -indicates L2 mode 2. layer3(1) -indicates L3 mode Default: layer2(3)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER layer2(3), layer3(1)  

hwDhcpServerSelectMode 1.3.6.1.4.1.2011.5.18.1.18
Describes the global DHCP server selection mode in the DHCP L3 relay mode. Currently, there are three modes: standard mode, option 60 mode, and MAC-range mode. Options: 1. standard(1) -indicates the standard mode 2. option60(2) -indicates the domain mode 3. macRange(3) -indicates the MAC-range mode Default: standard(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER standard(1), option60(2), macRange(3)  

hwDhcpMaxLenAppendOp82 1.3.6.1.4.1.2011.5.18.1.19
Indicates the allowable maximum length of a DHCP packet. Range: 500-1500 Unit: byte Default: 1500 bytes
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 500..1500  

hwDhcpCIDState 1.3.6.1.4.1.2011.5.18.1.20
Circuit-id writing state,true(writing to DHCP packet)/false(not writing to DHCP packet). Default: true(1)
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hwDhcpRIDState 1.3.6.1.4.1.2011.5.18.1.21
Remote-id writing state,true(writing to DHCP packet)/false(not writing to DHCP packet). Default: true(1)
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hwDhcpSuboption90Status 1.3.6.1.4.1.2011.5.18.1.22
Indicates the status of Suboption90 of DHCP Option82. Options: 1. enable(1) -enable Suboption90 of DHCP Option82 2. disable(2) -disable Suboption90 of DHCP Option82 Default: disable(2)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwDhcpRelayServerMode 1.3.6.1.4.1.2011.5.18.1.23
Configures the working mode of the DHCP server. Options: 1. shareload(1) -indicates the load balancing mode. In this mode, the system forwards all DHCP packets from the user to all servers in the DHCP server group. 2. backup(2) -indicates the backup mode. In this mode, the system forwards packets from the user to only the primary server in the DHCP server group. When the primary server is disconnected, the packets are forwarded to the secondary server. Default: shareload(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER shareload(1), backup(2)  

hwDhcpServerReplyMaxTime 1.3.6.1.4.1.2011.5.18.1.24
Configures or queries the response timeout time of packets of the DHCP server when the server works in the backup mode. Range: 1-60 Unit: second Default: 1
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..60  

hwDhcpServerReplyOvertimeMaxTimes 1.3.6.1.4.1.2011.5.18.1.25
Configures or queries the response timeout times of packets of the DHCP server when the server works in the backup mode. Range: 1-255 Default: 1
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..255  

hwDhcpSuboptionTable 1.3.6.1.4.1.2011.5.18.1.26
Indicates DHCP suboption feature. The index of this table is hwDhcpSuboptionIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwDhcpSuboptionEntry

hwDhcpSuboptionEntry 1.3.6.1.4.1.2011.5.18.1.26.1
Indicates DHCP suboption feature. The index of this entry is hwDhcpSuboptionIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwDhcpSuboptionEntry  

hwDhcpSuboptionIndex 1.3.6.1.4.1.2011.5.18.1.26.1.1
The index of DHCP suboption: index 1 stand for suboption 0x81; index 2 stand for suboption 0x82; index 3 stand for suboption 0x83; index 4 stand for suboption 0x84; index 5 stand for suboption 0x85; index 6 stand for suboption 0x86; index 7 stand for suboption 0x87; index 8 stand for suboption 0x88; index 9 stand for suboption 0x89; index 10 stand for suboption 0x8a; index 11 stand for suboption 0x8b; index 12 stand for suboption 0x8c; index 13 stand for suboption 0x8d; index 14 stand for suboption 0x8e; index 15 stand for suboption 0x90;
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..15  

hwDhcpSuboptionStatus 1.3.6.1.4.1.2011.5.18.1.26.1.2
The configuration of DHCP suboption: true(enable)/false(disable),the default is false.. hwDhcpSuboptionStatus OBJECT-TYPE
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hwDhcpSuboption7Status 1.3.6.1.4.1.2011.5.18.1.27
Indicates the status of Suboption7 of DHCP Option82. Options: 1. enable(1) -indicates the Suboption7 of DHCP Option82 is enabled 2. disable(2) -indicates the Suboption7 of DHCP Option82 is disabled Default: disable(2)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwDhcpProxyStatus 1.3.6.1.4.1.2011.5.18.1.28
Describes the current status of the DHCP proxy switch. Options: 1. enable(1) -enable DHCP proxy 2. disable(2) -disable DHCP proxy Default: disable(2) Perform the query and modify operations through get and set operations.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwDhcpLeaseTime 1.3.6.1.4.1.2011.5.18.1.29
Describes the DHCP proxy lease time of the system. Range: 0, 300-10080 Unit: minute Default: 0 indicates that the lease time is not set. Perform the query and modify operations through get and set operations.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..10080  

hwDhcpServerSelectModeByVlanTable 1.3.6.1.4.1.2011.5.18.1.30
Describes the DHCP server selection mode of the VLAN and supports the query and modify operations. The index of this table is hwVlanIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwDhcpServerSelectModeByVlanEntry

hwDhcpServerSelectModeByVlanEntry 1.3.6.1.4.1.2011.5.18.1.30.1
Describes the DHCP server selection mode of the VLAN and supports the query and modify operations. The index of this entry is hwVlanIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwDhcpServerSelectModeByVlanEntry  

hwDhcpServerSelectModeByVlan 1.3.6.1.4.1.2011.5.18.1.30.1.1
Indicates the DHCP server selection mode of the VLAN interface. Options: 1. standard(1) -indicates the standard mode 2. option60(2) -indicates the domain mode 3. macRange(3) -indicates the MAC-range mode Default: standard(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER standard(1), option60(2), macRange(3)  

hwDhcpServerSelectModeByVlanRowStatus 1.3.6.1.4.1.2011.5.18.1.30.1.2
Row status, used to set the DHCP server selection mode of the VLAN interface. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. createAndGo(4) -create a DHCP server selection mode of the VLAN interface 3. destroy(6) -delete a DHCP server selection mode of the VLAN interface To create the DHCP server selection mode of the VLAN interface, bind to hwDhcpServerSelectModeByVlan, set hwDhcpServerSelectModeByVlanRowStatus to createAndGo, and then perform the set operation. In the query operation, the value of this leaf is always active(1). To modify the DHCP server selection mode of the VLAN interface, specify hwDhcpServerSelectModeByVlan and perform the set operation. To delete the DHCP server selection mode of the VLAN interface and use the global selection mode, specify hwDhcpServerSelectModeByVlan, set hwDhcpServerSelectModeByVlanRowStatus to destroy(6), and perform the set operation.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwDhcpUserTable 1.3.6.1.4.1.2011.5.18.1.31
Provides the function of DHCP proxy user management, including querying the user information and forcing a user to go offline. The index of this table is hwDhcpUserIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwDhcpUserEntry

hwDhcpUserEntry 1.3.6.1.4.1.2011.5.18.1.31.1
Provides the function of DHCP proxy user management, including querying the user information and forcing a user to go offline. The index of this entry is hwDhcpUserIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwDhcpUserEntry  

hwDhcpUserIndex 1.3.6.1.4.1.2011.5.18.1.31.1.1
Indicates the DHCP proxy user index. Range: 0-4095
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..4095  

hwDhcpUserPortIndex 1.3.6.1.4.1.2011.5.18.1.31.1.2
Indicates the index of the port where the DHCP user resides. Its algorithm and value are the same as ifIndex.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwDhcpUserFlowID 1.3.6.1.4.1.2011.5.18.1.31.1.3
Indicates the ID of the service where the DHCP user resides. Here it indicates the service port ID created by the current device. The service port index on the NMS is 1 larger than the service port index on the host.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwDhcpUserVlanID 1.3.6.1.4.1.2011.5.18.1.31.1.4
Indicates the DHCP user VLAN index. Range: 1-4093
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4093  

hwDhcpUserIpAddress 1.3.6.1.4.1.2011.5.18.1.31.1.5
Indicates the IP address of the DHCP user dynamically obtained from the DHCP server, in dotted decimal notation, for example, 10.11.104.10.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwDhcpUserMACAddress 1.3.6.1.4.1.2011.5.18.1.31.1.6
Indicates the MAC address of the DHCP user. The format is a 6-byte hexadecimal character string, for example, 0x00 0xe0 0xfc 0x11 0x00 0x00.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

hwDhcpUserServerIpAddress 1.3.6.1.4.1.2011.5.18.1.31.1.7
Indicates the IP address of the DHCP server to which the DHCP user belongs, in dotted decimal notation, for example, 10.11.104.10.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwDhcpUserLeaseTime 1.3.6.1.4.1.2011.5.18.1.31.1.8
Indicates the lease time of the DHCP user. Unit: second
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwDhcpUserRowStatus 1.3.6.1.4.1.2011.5.18.1.31.1.9
Indicates the row status, used to query and delete the DHCP proxy user. The set operation supports only destroy(6). During query, active(1) is fixedly returned for this leaf. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. destroy(6) -delete a DHCP proxy user
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwDhcpDomainServerInVlanTable 1.3.6.1.4.1.2011.5.18.1.32
Describes the binding between the VLAN interface and the DHCP server group in the domain mode. It supports the query, create, modify, and delete operations. The indexes of this table are hwVlanIndex and hwDhcpDomainName. hwVlanIndex is imported from hwVlanMIBTable in HUAWEI-VLAN-MIB. hwDhcpDomainName is imported from hwDhcpDomainTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwDhcpDomainServerInVlanEntry

hwDhcpDomainServerInVlanEntry 1.3.6.1.4.1.2011.5.18.1.32.1
Describes the binding between the VLAN interface and the DHCP server group in the domain mode. It supports the query, create, modify, and delete operations. The indexes of this entry are hwVlanIndex and hwDhcpDomainName. hwVlanIndex is imported from hwVlanMIBTable in HUAWEI-VLAN-MIB. hwDhcpDomainName is imported from hwDhcpDomainTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwDhcpDomainServerInVlanEntry  

hwDhcpDomainServerInVlan 1.3.6.1.4.1.2011.5.18.1.32.1.1
Indicates the ID of the DHCP. It uses hwDhcpGroupID in hwDhcpGroupTable. Range: 0-19
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..19  

hwDhcpDomainServerInVlanRowStatus 1.3.6.1.4.1.2011.5.18.1.32.1.2
Row status, used to configure the DHCP server group bound to a domain under a VLAN. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. createAndGo(4) -create a binding between a domain under a VLAN to a DHCP server group 3. destroy(6) -delete the binding between a domain under a VLAN to the DHCP server group To create the binding between a domain under a VLAN to a DHCP server group, specify the index and hwDhcpDomainServerInVlan, set hwDhcpDomainServerInVlanRowStatus to createAndGo(4), and perform the set operation. To modify the binding between a domain under a VLAN to a DHCP server group, specify the index and hwDhcpDomainServerInVlan and perform the set operation. To delete the binding between a domain under a VLAN to the DHCP server group, specify the index and hwDhcpDomainServerInVlan, set hwDhcpDomainServerInVlanRowStatus to destroy(6), and perform the set operation. In the query operation, the value of this leaf is always active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwDhcpMacServerInVlanTable 1.3.6.1.4.1.2011.5.18.1.33
Describes the binding between the VLAN interface and the DHCP server group in the MAC-range mode. It supports the create, modify, delete, and query operations. The indexes of this table are hwVlanIndex and hwDhcpMacRangeName. hwVlanIndex is imported from hwVlanMIBTable in HUAWEI-VLAN-MIB. hwDhcpMacRangeName is imported from hwDhcpMacRangeTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwDhcpMacServerInVlanEntry

hwDhcpMacServerInVlanEntry 1.3.6.1.4.1.2011.5.18.1.33.1
Describes the binding between the VLAN interface and the DHCP server group in the MAC-range mode. It supports the create, modify, delete, and query operations. The indexes of this entry are hwVlanIndex and hwDhcpMacRangeName. hwVlanIndex is imported from hwVlanMIBTable in HUAWEI-VLAN-MIB. hwDhcpMacRangeName is imported from hwDhcpMacRangeTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwDhcpMacServerInVlanEntry  

hwDhcpMacServerInVlan 1.3.6.1.4.1.2011.5.18.1.33.1.1
Indicates the ID of the DHCP. It uses hwDhcpGroupID in hwDhcpGroupTable. Range: 0-19
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..19  

hwDhcpMacServerInVlanRowStatus 1.3.6.1.4.1.2011.5.18.1.33.1.2
Row status, used to configure the gateway IP address to which the MAC-range is bound. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. createAndGo(4) -create the binding between the MAC-range and the gateway IP address 3. destroy(6) -delete the binding between the MAC-range and the gateway IP address To create the binding between the MAC-range and the gateway IP address, specify the index first. The index is in the format of VLAN ID+MAC-range character length+ASCII value of each character. For example, to configure the DHCP server group for MAC-range 'abc' under VLAN1, the index value is 1.3.97.98.99. Then, specify hwDhcpMacServerInVlan, set hwDhcpMacServerInVlanRowStatus to createAndGo(4), and perform the set operation. To modify the binding between the MAC-range and the gateway IP address, specify the index and hwDhcpMacServerInVlan and perform the set operation. In the query operation, the value of this leaf is always active(1). To delete the binding between the MAC-range and the gateway IP address, specify the index and hwDhcpMacServerInVlan, set hwDhcpMacServerInVlanRowStatus to destroy(6), and perform the set operation.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwDhcpRelayInterfaceSrcip 1.3.6.1.4.1.2011.5.18.1.34
Configures or queries the filling mode of the source IP address of the current DHCP-relay upstream packet. Options: 1. receive(1) -indicates that in the DHCP packet sent from the relay to the server, the source IP address is set to the IP address of the Rx interface (user-side interface). 2. send(2) -indicates that in the DHCP packet sent from the relay to the server, the source IP address is set to the IP address of the Tx interface (network-side interface). Default: receive(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER receive(1), send(2)  

hwDhcpRelayInterfaceRelayAgent 1.3.6.1.4.1.2011.5.18.1.35
Configures or queries the filling mode of the GIADDR field of the current DHCP-relay upstream packet. Options: 1. receive(1) -indicates that in the DHCP packet sent from the DHCP relay to the server, the gateway IP address is set to the IP address of the Rx interface (user-side interface). 2. send(2) -indicates that in the DHCP packet sent from the DHCP relay to the server, the gateway IP address is set to the IP address of the Tx interface (network-side interface). Default: receive(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER receive(1), send(2)  

hwDhcpSmltTable 1.3.6.1.4.1.2011.5.18.1.36
Used to start and stop the DHCP emulation test and query the DHCP emulation test result. The index of this table is hwDhcpSmltIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwDhcpSmltEntry

hwDhcpSmltEntry 1.3.6.1.4.1.2011.5.18.1.36.1
Used to start and stop the DHCP emulation test and query the DHCP emulation test result. The index of this entry is hwDhcpSmltIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwDhcpSmltEntry  

hwDhcpSmltIndex 1.3.6.1.4.1.2011.5.18.1.36.1.1
Indicates the index of a simulation user. Range: 1-255 Currently, the system supports only one simulation user.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..255  

hwDhcpSmltServicePortId 1.3.6.1.4.1.2011.5.18.1.36.1.2
Indicates the index of the service port. The service port index here is 1 greater than the service port index queried through the CLI.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwDhcpSmltOption60 1.3.6.1.4.1.2011.5.18.1.36.1.3
Indicates the DHCP option 60 field. If the DHCP option 60 is not configured, the default configuration of the L3 interface is adopted. A string of 0-32 characters is supported.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

hwDhcpSmltOverTime 1.3.6.1.4.1.2011.5.18.1.36.1.4
Indicates the simulation timeout time. Range: 5-60 Default: 5 Unit: second
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 5..60  

hwDhcpSmltResult 1.3.6.1.4.1.2011.5.18.1.36.1.5
Indicates the DHCP simulation result. 0: Indicates that the DHCP simulation is successful. 6921509: Indicates the DHCP simulation is being performed. 6921510: Indicates that the DHCP simulation fails due to timeout.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

hwDhcpSmltStartTime 1.3.6.1.4.1.2011.5.18.1.36.1.6
Indicates the start time of the DHCP simulation.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

hwDhcpSmltEndTime 1.3.6.1.4.1.2011.5.18.1.36.1.7
Indicates the end time of the DHCP simulation.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

hwDhcpSmltUserIp 1.3.6.1.4.1.2011.5.18.1.36.1.8
Indicates the IP address obtained by the DHCP client.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwDhcpSmltSubNetMask 1.3.6.1.4.1.2011.5.18.1.36.1.9
Indicates the subnet mask of the IP address obtained by the DHCP client.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwDhcpSmltDhcpServerIp 1.3.6.1.4.1.2011.5.18.1.36.1.10
Indicates the IP address of the DHCP server.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwDhcpSmltDnsServerIp 1.3.6.1.4.1.2011.5.18.1.36.1.11
Indicates the IP address of the primary DNS server.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwDhcpSmltDnsServerName 1.3.6.1.4.1.2011.5.18.1.36.1.12
Indicates the name of the DNS server.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..200)  

hwDhcpSmltSecondaryDnsServerIp 1.3.6.1.4.1.2011.5.18.1.36.1.13
Indicates the IP address of the secondary DNS server.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwDhcpSmltGatewayIp 1.3.6.1.4.1.2011.5.18.1.36.1.14
Indicates the IP address of the gateway.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwDhcpSmltRowStatus 1.3.6.1.4.1.2011.5.18.1.36.1.15
Indicates the row status, used for starting and stopping the DHCP simulation. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. createAndGo(4) -start the DHCP simulation 3. destroy(6) -stop the DHCP simulation To start the DHCP simulation, input the index of the service port, set hwDhcpSmltRowStatus to createAndGo(4), and perform the set operation. To stop the DHCP simulation, input the simulation index, set hwDhcpSmltRowStatus to destroy(6), and perform the set operation. During the query operation, the value of this leaf is always active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwDhcpClientSystemAutoConfigStatus 1.3.6.1.4.1.2011.5.18.1.37
Set the system auto-config status Options: 1. enable(1) -indicates the system auto-config is enabled 2. disable(2) -indicates the system auto-config is disabled
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwDhcpMessagesStatisticsTable 1.3.6.1.4.1.2011.5.18.1.38
Queries and resets the statistics of transmitted and received DHCP L3 relay packets. The index of this table is ifIndex, and the value of the index must be 0.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwDhcpMessagesStatisticsEntry

hwDhcpMessagesStatisticsEntry 1.3.6.1.4.1.2011.5.18.1.38.1
Queries and resets the statistics of transmitted and received DHCP L3 relay packets. The index of this entry is ifIndex, and the value of the index must be 0.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwDhcpMessagesStatisticsEntry  

hwDhcpL3Option82ReceiveUntrust 1.3.6.1.4.1.2011.5.18.1.38.1.1
Indicates the total number of received DHCP packets containing the untrust option 82 information.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwDhcpL3Option82ReceiveOverLength 1.3.6.1.4.1.2011.5.18.1.38.1.2
Indicates the total number of DHCP packets that exceeds the maximum packet length after the option 82 information is added.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwDhcpL3Option82ReceiveOverMaxMessagesSize 1.3.6.1.4.1.2011.5.18.1.38.1.3
Indicates the total number of DHCP packets that exceeds the maximum option 82 length after the option 82 information is added.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwDhcpMessagesReceiveOffer 1.3.6.1.4.1.2011.5.18.1.38.1.4
Indicates the total number of received DHCP offer packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwDhcpMessagesReceiveAck 1.3.6.1.4.1.2011.5.18.1.38.1.5
Indicates the total number of received DHCP ACK packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwDhcpMessagesReceiveNak 1.3.6.1.4.1.2011.5.18.1.38.1.6
Indicates the total number of received DHCP NAK packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwDhcpMessagesReceiveDecline 1.3.6.1.4.1.2011.5.18.1.38.1.7
Indicates the total number of received DHCP decline packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwDhcpMessagesReceiveDiscover 1.3.6.1.4.1.2011.5.18.1.38.1.8
Indicates the total number of received DHCP discover packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwDhcpMessagesReceiveInform 1.3.6.1.4.1.2011.5.18.1.38.1.9
Indicates the total number of received DHCP inform packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwDhcpMessagesReceiveRelease 1.3.6.1.4.1.2011.5.18.1.38.1.10
Indicates the total number of received DHCP release packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwDhcpMessagesReceiveRequest 1.3.6.1.4.1.2011.5.18.1.38.1.11
Indicates the total number of received DHCP request packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwDhcpMessagesReceiveForceRenew 1.3.6.1.4.1.2011.5.18.1.38.1.12
Indicates the total number of received DHCP FORCERENEW packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwDhcpMessagesReceiveProxyPktAck 1.3.6.1.4.1.2011.5.18.1.38.1.13
Indicates the total number of DHCP ACK packets sent by the proxy.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwDhcpMessagesReceiveProxyPktRelease 1.3.6.1.4.1.2011.5.18.1.38.1.14
Indicates the total number of DHCP release packets sent by the proxy.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwDhcpMACConflictNum 1.3.6.1.4.1.2011.5.18.1.38.1.15
Indicates the total number of packets that have MAC address conflict.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwDhcpSearchDownFailNum 1.3.6.1.4.1.2011.5.18.1.38.1.16
Indicates the total number of ACK packets whose corresponding users cannot be found.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwDhcpUserNotZeroGiaddrPktNum 1.3.6.1.4.1.2011.5.18.1.38.1.17
Indicates the total number of packets whose DHCP DISCOVER and REQUEST 'giaddr' are not zero on the user side.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwDhcpMessagesStatisticsClear 1.3.6.1.4.1.2011.5.18.1.38.1.18
Resets the DHCP packet statistics. Options: 1. clear(1) -resets the DHCP packet statistics
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(1)  

hwDhcpProxyVbOids 1.3.6.1.4.1.2011.5.18.1.39
OBJECT IDENTIFIER    

hwDhcpSmltRequestID 1.3.6.1.4.1.2011.5.18.1.39.1
The Request ID of DHCP simulation.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

hwDhcpConfilctIpAddress 1.3.6.1.4.1.2011.5.18.1.39.2
The conflicting IP address got by DHCP.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  IpAddress  

hwDhcpConfilctIpAddressMask 1.3.6.1.4.1.2011.5.18.1.39.3
The sub net mask of the conflicting IP address got by DHCP.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  IpAddress  

hwDhcpFlowStatisticsTable 1.3.6.1.4.1.2011.5.18.1.40
Queries and resets the statistics of dhcp packets on flow. The index of this table is hwDhcpFlowStatisticsIndex. Statistics for a maximum of 64 service ports are supported at the same time.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwDhcpFlowStatisticsEntry

hwDhcpFlowStatisticsEntry 1.3.6.1.4.1.2011.5.18.1.40.1
Queries and resets the statistics of dhcp packets on flow. The index of this entry is hwDhcpFlowStatisticsIndex. Statistics for a maximum of 64 service ports are supported at the same time.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwDhcpFlowStatisticsEntry  

hwDhcpFlowStatisticsIndex 1.3.6.1.4.1.2011.5.18.1.40.1.1
The index of the dhcp flow statistics table. Indicates service port ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

hwDhcpFlowStatisticsRowStatus 1.3.6.1.4.1.2011.5.18.1.40.1.2
Indicates the row status, used for enabling and disabling the DHCP statistics on flow. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. createAndGo(4) -enable the DHCP statistics on flow. 3. destroy(6) -disable the DHCP statistics on flow. To start the DHCP statistics on flow, input the hwDhcpFlowStatisticsIndex, set hwDhcpFlowStatisticsRowStatus to createAndGo(4), and perform the set operation. To stop the DHCP statistics on flow, input the hwDhcpFlowStatisticsIndex, set hwDhcpFlowStatisticsRowStatus to destroy(6), and perform the set operation. During the query operation, the value of this leaf is always active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwDhcpFlowStatisticsOperMode 1.3.6.1.4.1.2011.5.18.1.40.1.3
Reset the DHCP flow statistics. Options: 1. reset(1) -Reset the DHCP flow statistics. 2. invalid(2) -In get operation, the invalid(2) will be returned.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER reset(1), invalid(2)  

hwDhcpFlowStatisticsReceiveDiscover 1.3.6.1.4.1.2011.5.18.1.40.1.4
Number of received DHCP discover packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwDhcpFlowStatisticsReceiveOffer 1.3.6.1.4.1.2011.5.18.1.40.1.5
Number of received DHCP offer packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwDhcpFlowStatisticsReceiveRequest 1.3.6.1.4.1.2011.5.18.1.40.1.6
Number of received DHCP request packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwDhcpFlowStatisticsReceiveDecline 1.3.6.1.4.1.2011.5.18.1.40.1.7
Number of received DHCP decline packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwDhcpFlowStatisticsReceiveAck 1.3.6.1.4.1.2011.5.18.1.40.1.8
Number of received DHCP ack packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwDhcpFlowStatisticsReceiveNak 1.3.6.1.4.1.2011.5.18.1.40.1.9
Number of received DHCP nack packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwDhcpFlowStatisticsReceiveRelease 1.3.6.1.4.1.2011.5.18.1.40.1.10
Number of received DHCP release packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwDhcpFlowStatisticsReceiveInform 1.3.6.1.4.1.2011.5.18.1.40.1.11
Number of received DHCP inform packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwDhcpFlowStatisticsReceiveRenew 1.3.6.1.4.1.2011.5.18.1.40.1.12
Number of received DHCP renew packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwDhcpFlowStatisticsSendDiscover 1.3.6.1.4.1.2011.5.18.1.40.1.13
Number of sent DHCP discover packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwDhcpFlowStatisticsSendOffer 1.3.6.1.4.1.2011.5.18.1.40.1.14
Number of sent DHCP offer packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwDhcpFlowStatisticsSendRequest 1.3.6.1.4.1.2011.5.18.1.40.1.15
Number of sent DHCP request packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwDhcpFlowStatisticsSendDecline 1.3.6.1.4.1.2011.5.18.1.40.1.16
Number of sent DHCP decline packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwDhcpFlowStatisticsSendAck 1.3.6.1.4.1.2011.5.18.1.40.1.17
Number of sent DHCP ack packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwDhcpFlowStatisticsSendNak 1.3.6.1.4.1.2011.5.18.1.40.1.18
Number of sent DHCP nack packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwDhcpFlowStatisticsSendRelease 1.3.6.1.4.1.2011.5.18.1.40.1.19
Number of sent DHCP release packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwDhcpFlowStatisticsSendInform 1.3.6.1.4.1.2011.5.18.1.40.1.20
Number of sent DHCP inform packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwDhcpFlowStatisticsSendRenew 1.3.6.1.4.1.2011.5.18.1.40.1.21
Number of sent DHCP renew packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwDhcpFlowStatisticsReceiveUnknownType 1.3.6.1.4.1.2011.5.18.1.40.1.22
Number of received unknown type DHCP packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwDhcpFlowStatisticsTagTooLong 1.3.6.1.4.1.2011.5.18.1.40.1.23
Number of DHCP packets which option length is over 255.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwDhcpFlowStatisticsFrameTooLong 1.3.6.1.4.1.2011.5.18.1.40.1.24
Number of DHCP packets which packet length is over max length after adding options. The defalut value of DHCP packet max length is 1500 bytes.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwDhcpFlowStatisticsReceiveUntrust 1.3.6.1.4.1.2011.5.18.1.40.1.25
Number of DHCP packets with untrusty options.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwDhcpFlowStatisticsReceiveWithGiaddr 1.3.6.1.4.1.2011.5.18.1.40.1.26
Number of DHCP packets which giaddr is not zero.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwDhcpReverse 1.3.6.1.4.1.2011.5.18.1.41
Indicates the status of the global reverse DHCP packets switch. Options: 1. enable(1) -indicates the reverse DHCP L2 packets are forwarded. 2. disable(2) -indicates the reverse DHCP L2 packets are dropped. Default: disable(2)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwDhcpProxyTraps 1.3.6.1.4.1.2011.5.18.2
OBJECT IDENTIFIER    

hwDhcpProxyCommonTraps 1.3.6.1.4.1.2011.5.18.2.1
OBJECT IDENTIFIER    

hwDhcpProxyCommonTrapsPrefix 1.3.6.1.4.1.2011.5.18.2.1.0
OBJECT IDENTIFIER    

hwDhcpSmltResultTrap 1.3.6.1.4.1.2011.5.18.2.1.0.1
This notification is generated when DHCP client has found network-side DHCP server or finding timeout.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwDhcpProxyAlarmTraps 1.3.6.1.4.1.2011.5.18.2.2
OBJECT IDENTIFIER    

hwDhcpProxyAlarmTrapsPrefix 1.3.6.1.4.1.2011.5.18.2.2.0
OBJECT IDENTIFIER    

hwIpConflictTrap 1.3.6.1.4.1.2011.5.18.2.2.0.1
This notification is generated when an IP address got by DHCP client for the interface conflicted with those assigned to other interfaces.
Status: current Access: read-write
NOTIFICATION-TYPE