HUAWEI-CES-MIB

Imported modules

HUAWEI-DEVICE-MIB	HUAWEI-MIB	IF-MIB
SNMPv2-SMI	SNMPv2-TC

Imported symbols

hwFrameIndex	hwSlotIndex	hwPortIndex
hwConfigChangeIP	huaweiMgmt	ifIndex
Unsigned32	Gauge32	Counter32
OBJECT-TYPE	Integer32	MODULE-IDENTITY
NOTIFICATION-TYPE	RowStatus	DateAndTime

Defined Types

HwAtmCesServDescrExtEntry
SEQUENCE
	hwAtmCesServDescrExtNValue	Integer32
	hwAtmCesServDescrExtBitMap	Unsigned32
	hwAtmCesServDescrExtFillRate	Integer32
	hwAtmCesServDescrExtRowStatus	RowStatus

HwAtmCesCfgEntry
SEQUENCE
	hwAtmCesCfgWorkMode	INTEGER
	hwAtmCesCfgDDNClockMode	INTEGER
	hwAtmCesCfgDDNClockSrcPort	Integer32
	hwAtmCesCfgE1GroupType0	INTEGER
	hwAtmCesCfgE1GroupType1	INTEGER
	hwAtmCesCfgE1GroupType2	INTEGER
	hwAtmCesCfgE1GroupType3	INTEGER
	hwAtmCesCfgAccessMode	INTEGER

HwAtmCesPortCfgEntry
SEQUENCE
	hwAtmCesPortCfgWorkMode	INTEGER
	hwAtmCesPortCfgClockMode	INTEGER
	hwAtmCesPortCfgSignalType	INTEGER
	hwAtmCesPortCfgFrameVerifyMode	INTEGER
	hwAtmCesPortTimeSlotBMP	Unsigned32
	hwAtmCesPortCfgWarningStatus	Unsigned32
	hwAtmCesPortCfgUtopiaStatus	INTEGER
	hwAtmCesPortCfgLiuStatus	INTEGER
	hwAtmCesPortCfgImpedance	INTEGER
	hwAtmCesPortCfgPhyState	INTEGER
	hwAtmCesPortCfgLoopLineState	INTEGER
	hwAtmCesPortCfgE1Frametype	INTEGER
	hwAtmCesPortAdminStatus	INTEGER
	hwAtmCesPCMErrorReportAlarm	Unsigned32
	hwAtmCesPortCfgESAlarmThreshold	Integer32
	hwAtmCesPortCfgCSESAlarmThreshold	Integer32
	hwAtmCesPortCfgDMAlarmThreshold	Integer32
	hwAtmCesPortLineCode	INTEGER
	hwAtmCesPortAcmSource	Integer32
	hwAtmCesPortCfgState	INTEGER

HwAtmCesPortV35CfgEntry
SEQUENCE
	hwAtmCesPortV35CfgNValue	Integer32
	hwAtmCesPortV35CfgClockMode	INTEGER
	hwAtmCesPortV35CfgBlockStatus	INTEGER
	hwAtmCesPortV35CfgReversePhase	INTEGER
	hwAtmCesPortV35CfgWarningStatus	Integer32
	hwAtmCesPortV35CfgPortV35Status	INTEGER

HwAtmCesChnlStatisEntry
SEQUENCE
	hwAtmCesChnlStatisCounter0	Counter32
	hwAtmCesChnlStatisCounter1	Counter32
	hwAtmCesChnlStatisCounter2	Counter32
	hwAtmCesChnlStatisCounter3	Counter32
	hwAtmCesChnlStatisCounter4	Counter32
	hwAtmCesChnlStatisCounter5	Counter32
	hwAtmCesChnlStatisCounter6	Counter32
	hwAtmCesChnlStatisCounter7	Counter32
	hwAtmCesChnlStatisCounter8	Counter32
	hwAtmCesChnlStatisCounter9	Counter32
	hwAtmCesChnlStatisCounter10	Counter32
	hwAtmCesChnlStatisCounter11	Counter32
	hwAtmCesChnlStatisCounter12	Counter32
	hwAtmCesChnlStatisCounter13	Counter32
	hwAtmCesChnlStatisCounter14	Counter32
	hwAtmCesChnlStatisCounter15	Counter32
	hwAtmCesChnlStatisOper	INTEGER

HwAtmCesUDTPortStatisEntry
SEQUENCE
	hwAtmCesUDTPortStatisCounter0	Counter32
	hwAtmCesUDTPortStatisCounter1	Counter32
	hwAtmCesUDTPortStatisCounter2	Counter32
	hwAtmCesUDTPortStatisCounter3	Counter32
	hwAtmCesUDTPortStatisCounter4	Counter32
	hwAtmCesUDTPortStatisCounter5	Counter32
	hwAtmCesUDTPortStatisCounter6	Counter32
	hwAtmCesUDTPortStatisCounter7	Counter32
	hwAtmCesUDTPortStatisCounter8	Counter32
	hwAtmCesUDTPortStatisCounter9	Counter32
	hwAtmCesUDTPortStatisCounter10	Counter32
	hwAtmCesUDTPortStatisCounter11	Counter32
	hwAtmCesUDTPortStatisCounter12	Counter32
	hwAtmCesUDTPortStatisCounter13	Counter32
	hwAtmCesUDTPortStatisCounter14	Counter32
	hwAtmCesUDTPortStatisCounter15	Counter32
	hwAtmCesUDTPortStatisOper	INTEGER

HwAtmCesUNIPortStatisEntry
SEQUENCE
	hwAtmCesUNIPortStatisCounter0	Counter32
	hwAtmCesUNIPortStatisCounter1	Counter32
	hwAtmCesUNIPortStatisCounter2	Counter32
	hwAtmCesUNIPortStatisCounter3	Counter32
	hwAtmCesUNIPortStatisCounter4	Counter32
	hwAtmCesUNIPortStatisOper	INTEGER

HwAtmCesPortMaintEntry
SEQUENCE
	hwAtmCesPortMaintLoop	INTEGER
	hwAtmCesPortMaintOper	INTEGER
	hwAtmCesPortMaintSingleTimeslotId	Integer32

HwCesECSMonitorControlEntry
SEQUENCE
	hwCesECSMonitorPeriodType	INTEGER
	hwCesECSMonitorStatusReal	INTEGER
	hwCesECSMonitorStartTimeReal	DateAndTime
	hwCesECSMonitorStatusUserSet	INTEGER
	hwCesECSMonitorStartTimeUserSet	DateAndTime

HwCesECSThresholdControlEntry
SEQUENCE
	hwCesECSThresholdEnabled	INTEGER

HwCesECSThresholdEntry
SEQUENCE
	hwCesECSThresholdLowES	Gauge32
	hwCesECSThresholdHighES	Gauge32
	hwCesECSThresholdSES	Gauge32
	hwCesECSThresholdUAS	Gauge32
	hwCesECSThresholdCESC	Gauge32

HwCesECSDateEntry
SEQUENCE
	hwCesECSMonitorStage	INTEGER
	hwCesECSMonitorStageStartTime	DateAndTime
	hwCesECSDataES	Gauge32
	hwCesECSDataSES	Gauge32
	hwCesECSDataUAS	Gauge32

HwAtmCesSubboardWorkModeEntry
SEQUENCE
	hwAtmCesSubboardWorkMode	INTEGER

HwAtmCesPortCESoPCLKEntry
SEQUENCE
	hwAtmCesPortCESoPCLKIndex	Integer32
	hwAtmCesPortCESoPCLKBindPW	Unsigned32
	hwAtmCesPortCESoPCLKSetFlag	INTEGER
	hwAtmCesPortCESoPCLKState	INTEGER
	hwAtmCesPortCESoPLineCLKPortId	Integer32
	hwAtmCesPortCESoPLineCLKState	INTEGER

HwCesTDMVCLCfgEntry
SEQUENCE
	hwTDMVCLID	Unsigned32
	hwTDMVCLType	INTEGER
	hwTDMVCLTimeslot	Unsigned32
	hwTDMVCLRowStatus	RowStatus

Defined Values

hwCes		1.3.6.1.4.1.2011.5.11
The MIB is used for defining Huawei's CES management MIB objects, which provides CES management NMS interfaces.
MODULE-IDENTITY

hwAtmCesServDescrExtTable		1.3.6.1.4.1.2011.5.11.1
CES service description extended table. This table is used during the creation of the connection between the CES-SDT port and the CES-V35 port. The index of this table is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwAtmCesServDescrExtEntry

hwAtmCesServDescrExtEntry		1.3.6.1.4.1.2011.5.11.1.1
CES service description extended table. This table is used during the creation of the connection between the CES-SDT port and the CES-V35 port. The index of this entry is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwAtmCesServDescrExtEntry

hwAtmCesServDescrExtNValue		1.3.6.1.4.1.2011.5.11.1.1.1
The N value of V35 port.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..32

hwAtmCesServDescrExtBitMap		1.3.6.1.4.1.2011.5.11.1.1.2
The timeslot bitmap in SDT mode.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	2..4294967294

hwAtmCesServDescrExtFillRate		1.3.6.1.4.1.2011.5.11.1.1.3
The fillrate of cell.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	20..47

hwAtmCesServDescrExtRowStatus		1.3.6.1.4.1.2011.5.11.1.1.4
This object is used to create a new row or modify or delete an existing row in this table. createAndGo(4),destroy(6)
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hwAtmCesCfgTable		1.3.6.1.4.1.2011.5.11.2
CES board configration table. The indexes of this table are hwFrameIndex and hwSlotIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwAtmCesCfgEntry

hwAtmCesCfgEntry		1.3.6.1.4.1.2011.5.11.2.1
CES board configration table. The indexes of this entry are hwFrameIndex and hwSlotIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwAtmCesCfgEntry

hwAtmCesCfgWorkMode		1.3.6.1.4.1.2011.5.11.2.1.1
CES board working mode. Options: 1. tdm(1) - CES board working mode is tdm 2. e1(2) - CES board working mode is e1 3. v35(3) - CES board working mode is v35 4. idle(4) - CES board working mode is idle 5. indep(5) - CES board working mode is indep
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	tdm(1), e1(2), v35(3), idle(4), indep(5)

hwAtmCesCfgDDNClockMode		1.3.6.1.4.1.2011.5.11.2.1.2
The DDN clock mode of CES board. Options: 1. line(1) - The DDN clock mode of CES board is line 2. srts(2) - The DDN clock mode of CES board is srts
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	line(1), srts(2)

hwAtmCesCfgDDNClockSrcPort		1.3.6.1.4.1.2011.5.11.2.1.3
The DDN clock source of CES board.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..15

hwAtmCesCfgE1GroupType0		1.3.6.1.4.1.2011.5.11.2.1.4
E1 Group 0 (port 0~3) work mode. Options: 1. cesE1(1) - E1 work mode is cesE1 2. tdmE1(2) - E1 work mode is tdmE1 3. ddnE1(3) - E1 work mode is ddnE1
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	cesE1(1), tdmE1(2), ddnE1(3)

hwAtmCesCfgE1GroupType1		1.3.6.1.4.1.2011.5.11.2.1.5
E1 Group 1 (port 4~7) work mode. Options: 1. cesE1(1) - E1 work mode is cesE1 2. tdmE1(2) - E1 work mode is tdmE1 3. ddnE1(3) - E1 work mode is ddnE1
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	cesE1(1), tdmE1(2), ddnE1(3)

hwAtmCesCfgE1GroupType2		1.3.6.1.4.1.2011.5.11.2.1.6
E1 Group 2 (port 8~11) work mode. Options: 1. cesE1(1) - E1 work mode is cesE1 2. tdmE1(2) - E1 work mode is tdmE1 3. ddnE1(3) - E1 work mode is ddnE1
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	cesE1(1), tdmE1(2), ddnE1(3)

hwAtmCesCfgE1GroupType3		1.3.6.1.4.1.2011.5.11.2.1.7
E1 Group 3 (port 12~15) work mode. Options: 1. cesE1(1) - E1 work mode is cesE1 2. tdmE1(2) - E1 work mode is tdmE1 3. ddnE1(3) - E1 work mode is ddnE1
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	cesE1(1), tdmE1(2), ddnE1(3)

hwAtmCesCfgAccessMode		1.3.6.1.4.1.2011.5.11.2.1.8
Board work mode. Options: 1. e1(1) - E1 2. t1(2) - T1
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	e1(1), t1(2)

hwAtmCesPortCfgTable		1.3.6.1.4.1.2011.5.11.3
Port configration table of CES board. The table is used to port configration of CES board. The index of this table is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwAtmCesPortCfgEntry

hwAtmCesPortCfgEntry		1.3.6.1.4.1.2011.5.11.3.1
Port configration table of CES board. The table is used to port configration of CES board. The index of this entry is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwAtmCesPortCfgEntry

hwAtmCesPortCfgWorkMode		1.3.6.1.4.1.2011.5.11.3.1.1
The working mode of port. Options: 1. uni(1) - UNI mode 2. sdt(2) - SDT mode 3. udt(3) - UDT mode 4. idle(4) - Idle mode 5. ima(5) - IMA mode 6. invalidMode(-1) - Invalid mode
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	uni(1), sdt(2), udt(3), idle(4), ima(5), invalidMode(-1)

hwAtmCesPortCfgClockMode		1.3.6.1.4.1.2011.5.11.3.1.2
The clock mode of port. Options: 1. system(1) - System clock 2. line(2) - Line clock 3. acm(3) - Acm clock 4. srts(4) - Srts clock 5. invalidClock(-1) - Invalid clock
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	system(1), line(2), acm(3), srts(4), invalidClock(-1)

hwAtmCesPortCfgSignalType		1.3.6.1.4.1.2011.5.11.3.1.3
Signal type of port. Options: 1. ccs(1) - CCS signal 2. cas(2) - CAS signal 3. invalidSignal(-1) - Invalid signal
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	ccs(1), cas(2), invalidSignal(-1)

hwAtmCesPortCfgFrameVerifyMode		1.3.6.1.4.1.2011.5.11.3.1.4
Frame verify mode of port. Options: 1. enable(1) - Open frame verify 2. disable(2) - Close frame verify 3. invalidOrNotSupport(-1) - Invalid or does not support frame verify
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2), invalidOrNotSupport(-1)

hwAtmCesPortTimeSlotBMP		1.3.6.1.4.1.2011.5.11.3.1.5
Timeslot bitmap of port, 0 is the initial value of timeslot bitmap.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0 \| 2..4294967294

hwAtmCesPortCfgWarningStatus		1.3.6.1.4.1.2011.5.11.3.1.6
Alarm state of port.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwAtmCesPortCfgUtopiaStatus		1.3.6.1.4.1.2011.5.11.3.1.7
UTOPIA port state. Options: 1. normal(1) - Normal state 2. test(2) - Test state 3. idle(3) - Idle state 4. notExist(4) - Does not exist 5. fail(5) - Fail state 6. block(6) - Block state
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	normal(1), test(2), idle(3), notExist(4), fail(5), block(6)

hwAtmCesPortCfgLiuStatus		1.3.6.1.4.1.2011.5.11.3.1.8
LIU port state. Options: 1. normal(1) - Normal state 2. test(2) - Test state 3. idle(3) - Idle state 4. notExisted(4) - Does not exist 5. fail(5) - Fail state 6. block(6) - Block state 7. maintain(7) - Maintain state 8. localLoop(11) - Local-loop state 9. remoteLoop(12) - Remote-loop state 10. tsLocalLoop(13) - ts-Localloop state 11. payLoadLoop(14) - Payload-loop state 12. invalidStatus(-1) - Invalid state
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	normal(1), test(2), idle(3), notExisted(4), fail(5), block(6), maintain(7), localLoop(11), remoteLoop(12), tsLocalLoop(13), payLoadLoop(14), invalidStatus(-1)

hwAtmCesPortCfgImpedance		1.3.6.1.4.1.2011.5.11.3.1.9
Impedance of port. Options: 1. ohm75(1) - 75 ohm 2. ohm120(2) - 120 ohm 3. ohm100(3) - 100 ohm 4. invalidImpedance(-1) - Invalid impedance
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	ohm75(1), ohm120(2), ohm100(3), invalidImpedance(-1)

hwAtmCesPortCfgPhyState		1.3.6.1.4.1.2011.5.11.3.1.10
E1 port physical state. Options: 1. normal(0) - Normal state 2. fault(1) - Fault state 3. unknown(2) - Unknown state
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	normal(0), fault(1), unknown(2)

hwAtmCesPortCfgLoopLineState		1.3.6.1.4.1.2011.5.11.3.1.11
E1 port line state. Options: 1. synchronized(0) - Synchronized state 2. farEndAlarm(1) - Far-End-Alarm state 3. nearEndAlarm(2) - Near-End-Alarm state 4. testing(3) - Testing state 5. unknown(4) - Unknown state
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	synchronized(0), farEndAlarm(1), nearEndAlarm(2), testing(3), unknown(4)

hwAtmCesPortCfgE1Frametype		1.3.6.1.4.1.2011.5.11.3.1.12
pvm-e1 port frame type. Options: 1. pcm31(1) - PCM31 frame 2. unframe(2) - It's not a frame
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	pcm31(1), unframe(2)

hwAtmCesPortAdminStatus		1.3.6.1.4.1.2011.5.11.3.1.13
Port operation type. Options: 1. reset(1) - Reset port 2. selfcheck(2) - Self check
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	reset(1), selfcheck(2)

hwAtmCesPCMErrorReportAlarm		1.3.6.1.4.1.2011.5.11.3.1.14
PCM error report configuration. bit0: report alarm when pcm line fault occurs; bit1: set PCM fault and set port to OOS state when ULF exceeds the threshold; bit2: set PCM fault and set port to OOS state when OLF exceeds the threshold; bit3: report event when LDT exceeds the threshold; bit4: report event when frame slip exceeds the threshold; bit5: report event when line temporary disturb occurs.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..63

hwAtmCesPortCfgESAlarmThreshold		1.3.6.1.4.1.2011.5.11.3.1.15
Errored seconds alarm threshold.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..3600

hwAtmCesPortCfgCSESAlarmThreshold		1.3.6.1.4.1.2011.5.11.3.1.16
Consecutive severely errored seconds alarm threshold.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..60

hwAtmCesPortCfgDMAlarmThreshold		1.3.6.1.4.1.2011.5.11.3.1.17
Degraded minutes alarm threshold.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..60

hwAtmCesPortLineCode		1.3.6.1.4.1.2011.5.11.3.1.18
Configuration of the line encoding type. Options: 1. hdb3(1) - HDB3 code 2. ami(2) - AMI code 3. b8zs(3) - B8ZS code 4. invalidCode(-1) - Invalid code
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	hdb3(1), ami(2), b8zs(3), invalidCode(-1)

hwAtmCesPortAcmSource		1.3.6.1.4.1.2011.5.11.3.1.19
Configuration of adaptive clock source.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hwAtmCesPortCfgState		1.3.6.1.4.1.2011.5.11.3.1.20
Indicates the configuration status of the subscriber type. Options: 1. notConfigUserType(1) - Did not configure 2. configVoiceUserType(2) - Configured MG PRA subscriber 3. configPWUserType(3) - Configured Connection user 4. configNativeTDM(4) - Configured Native TDM
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notConfigUserType(1), configVoiceUserType(2), configPWUserType(3), configNativeTDM(4)

hwAtmCesPortV35CfgTable		1.3.6.1.4.1.2011.5.11.4
Port configration table of V35. This table is used to configure the CES-V35 port. The configuration includes reversing the clock and clock mode, blocking and unblocking the port, and querying the N value, status and alarm of the port. The index of this table is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwAtmCesPortV35CfgEntry

hwAtmCesPortV35CfgEntry		1.3.6.1.4.1.2011.5.11.4.1
Port configration table of V35. This table is used to configure the CES-V35 port. The configuration includes reversing the clock and clock mode, blocking and unblocking the port, and querying the N value, status and alarm of the port. The index of this entry is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwAtmCesPortV35CfgEntry

hwAtmCesPortV35CfgNValue		1.3.6.1.4.1.2011.5.11.4.1.1
N value of V35 port.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..32

hwAtmCesPortV35CfgClockMode		1.3.6.1.4.1.2011.5.11.4.1.2
Clock mode of port. Options: 1. dceInternal(1) - Dec-Internal clock 2. dceSlave(2) - Dec-Slave clock 3. dceExternal(3) - Dec-External clock 4. dteInternal(4) - Dte-Internal clock 5. dteSlave(5) - Dte-Slave clock 6. dteExternal(6) - Dte-External clock
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	dceInternal(1), dceSlave(2), dceExternal(3), dteInternal(4), dteSlave(5), dteExternal(6)

hwAtmCesPortV35CfgBlockStatus		1.3.6.1.4.1.2011.5.11.4.1.3
To block or unblock the port, or to inquiry the block state. Options: 1. block(1) - Block the port 2. unblock(2) - UnBlock the port 3. invalidStatus(-1) - Invalid status
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	block(1), unblock(2), invalidStatus(-1)

hwAtmCesPortV35CfgReversePhase		1.3.6.1.4.1.2011.5.11.4.1.4
Inverse the clock of V35 port, inquiry the clock state. Options: 1. noInverse(1) - Not inverse state 2. inverse(2) - Inverse state
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	noInverse(1), inverse(2)

hwAtmCesPortV35CfgWarningStatus		1.3.6.1.4.1.2011.5.11.4.1.5
Alarm state of V35 port.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..127

hwAtmCesPortV35CfgPortV35Status		1.3.6.1.4.1.2011.5.11.4.1.6
Port state of V35. Options: 1. idle(1) - Idle state 2. normal(2) - Normal state 3. localLoop(3) - Local loop state 4. remoteLoop(4) - Remote loop state 5. block(5) - Block state 6. fault(6) - Fault state
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	idle(1), normal(2), localLoop(3), remoteLoop(4), block(5), fault(6)

hwAtmCesChnlStatisTable		1.3.6.1.4.1.2011.5.11.5
The statistics table of CES channel. This table is used to collect the cell data of the SDT port. The index of this table is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwAtmCesChnlStatisEntry

hwAtmCesChnlStatisEntry		1.3.6.1.4.1.2011.5.11.5.1
The statistics table of CES channel. This table is used to collect the cell data of the SDT port. The index of this entry is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwAtmCesChnlStatisEntry

hwAtmCesChnlStatisCounter0		1.3.6.1.4.1.2011.5.11.5.1.1
Number of discarded cells due to Output Queue or Segmentation Buffer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAtmCesChnlStatisCounter1		1.3.6.1.4.1.2011.5.11.5.1.2
Not used.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAtmCesChnlStatisCounter2		1.3.6.1.4.1.2011.5.11.5.1.3
Number of cells written to the Reassembly Buffer. It excludes cells that were discarded for any reason and cells that are inserted instead of lost cells (atmfReassembledCells).
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAtmCesChnlStatisCounter3		1.3.6.1.4.1.2011.5.11.5.1.4
Number of times incomingMFB pulse is not synchronous to SDT start of structure upstream (AAL1).
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAtmCesChnlStatisCounter4		1.3.6.1.4.1.2011.5.11.5.1.5
Number of cells causing a Reassembly Buffer overflow (AAL0 & AAL1). It includes accepted cells that are causing the filling level to exceed the predefined threshold and discarded cells due to the attempt of writing to the Reassembly Buffer when the threshold is already exceeded.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAtmCesChnlStatisCounter5		1.3.6.1.4.1.2011.5.11.5.1.6
Number of end of Reassembly Buffer overflow (AAL0 & AAL1). The value is incremented upon acceptance of the next cell after Reassembly Buffer overflow.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAtmCesChnlStatisCounter6		1.3.6.1.4.1.2011.5.11.5.1.7
The count of the number of AAL1 header errors detected including those corrected. Header errors include correctable and uncorrectable CRC, plus bad parity. (atmfCESHdrErrors).
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAtmCesChnlStatisCounter7		1.3.6.1.4.1.2011.5.11.5.1.8
Number of times that the sequence number of an incoming AAL1 SARPDU causes a transition of the SC algorithm from 'sync' to 'out of sequence' and from 'invalid' to 'out of sync'.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAtmCesChnlStatisCounter8		1.3.6.1.4.1.2011.5.11.5.1.9
Number of downstream 'misinserted cells' detected by the AAL1 sequence count algorithm (atmfCESMisinsertedCells).
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAtmCesChnlStatisCounter9		1.3.6.1.4.1.2011.5.11.5.1.10
Number of downstream cells discarded by the AAL1 sequence count algorithm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAtmCesChnlStatisCounter10		1.3.6.1.4.1.2011.5.11.5.1.11
Number of rejected AAL1 SDT pointers due to parity error or wrong pointer value (93 < pointer <127).
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAtmCesChnlStatisCounter11		1.3.6.1.4.1.2011.5.11.5.1.12
Number of SC cycles with more than one AAL1 SDT pointer field if only one pointer is expected (sdt_once = 1).
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAtmCesChnlStatisCounter12		1.3.6.1.4.1.2011.5.11.5.1.13
Number of start of reassembly buffer underflow (AAL0 & AAL1) (atmfCESBufUnderflow).
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAtmCesChnlStatisCounter13		1.3.6.1.4.1.2011.5.11.5.1.14
Number of inserted starvation cells (AAL0 & AAL1) due to reassembly buffer underflow.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAtmCesChnlStatisCounter14		1.3.6.1.4.1.2011.5.11.5.1.15
Number of times the Reassembly Buffer is re-initialized due to AAL1 start of structure is out of sync with port start of structure.This records the count of the number of events in which the AAL1 reassembler found that an SDT pointer is not where it is expected, and the pointer must be reacquired. This count is only meaningful for structured CES. (atmfCESPointerReframes).
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAtmCesChnlStatisCounter15		1.3.6.1.4.1.2011.5.11.5.1.16
Number of downstream 'Lost cells' detected by the AAL1 sequence count algorithm (atmfCESLostCells).
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAtmCesChnlStatisOper		1.3.6.1.4.1.2011.5.11.5.1.17
The operating code of clearing the statistics of CES SDT port. Options: 1. clear(1) - Clear the statistics of CES SDT port
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	clear(1)

hwAtmCesUDTPortStatisTable		1.3.6.1.4.1.2011.5.11.6
The statistics table of CES UDT port. This table is used to collect the cell data of the UDT port. The index of this table is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwAtmCesUDTPortStatisEntry

hwAtmCesUDTPortStatisEntry		1.3.6.1.4.1.2011.5.11.6.1
The statistics table of CES UDT port. This table is used to collect the cell data of the UDT port. The index of this entry is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwAtmCesUDTPortStatisEntry

hwAtmCesUDTPortStatisCounter0		1.3.6.1.4.1.2011.5.11.6.1.1
Number of discarded cells due to Output Queue or Segmentation Buffer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAtmCesUDTPortStatisCounter1		1.3.6.1.4.1.2011.5.11.6.1.2
Not used.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAtmCesUDTPortStatisCounter2		1.3.6.1.4.1.2011.5.11.6.1.3
Number of cells written to the Reassembly Buffer. It excludes cells that were discarded for any reason and cells that are inserted instead of lost cells (atmfReassembledCells).
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAtmCesUDTPortStatisCounter3		1.3.6.1.4.1.2011.5.11.6.1.4
Number of times incomingMFB pulse is not synchronous to SDT start of structure upstream (AAL1).
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAtmCesUDTPortStatisCounter4		1.3.6.1.4.1.2011.5.11.6.1.5
Number of cells causing a Reassembly Buffer overflow (AAL0 & AAL1). It includes accepted cells that are causing the filling level to exceed the predefined threshold and discarded cells due to the attempt of writing to the Reassembly Buffer when the threshold is already exceeded.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAtmCesUDTPortStatisCounter5		1.3.6.1.4.1.2011.5.11.6.1.6
Number of end of Reassembly Buffer overflow (AAL0 & AAL1). The value is incremented upon acceptance of the next cell after Reassembly Buffer overflow.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAtmCesUDTPortStatisCounter6		1.3.6.1.4.1.2011.5.11.6.1.7
The count of the number of AAL1 header errors detected including those corrected. Header errors include correctable and uncorrectable CRC, plus bad parity. (atmfCESHdrErrors).
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAtmCesUDTPortStatisCounter7		1.3.6.1.4.1.2011.5.11.6.1.8
Number of times that the sequence number of an incoming AAL1 SARPDU causes a transition of the SC algorithm from 'sync' to 'out of sequence' and from 'invalid' to 'out of sync'.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAtmCesUDTPortStatisCounter8		1.3.6.1.4.1.2011.5.11.6.1.9
Number of downstream 'misinserted cells' detected by the AAL1 sequence count algorithm (atmfCESMisinsertedCells).
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAtmCesUDTPortStatisCounter9		1.3.6.1.4.1.2011.5.11.6.1.10
Number of downstream cells discarded by the AAL1 sequence count algorithm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAtmCesUDTPortStatisCounter10		1.3.6.1.4.1.2011.5.11.6.1.11
Number of rejected AAL1 SDT pointers due to parity error or wrong pointer value (93 < pointer <127).
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAtmCesUDTPortStatisCounter11		1.3.6.1.4.1.2011.5.11.6.1.12
Number of SC cycles with more than one AAL1 SDT pointer field if only one pointer is expected (sdt_once = 1).
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAtmCesUDTPortStatisCounter12		1.3.6.1.4.1.2011.5.11.6.1.13
Number of start of reassembly buffer underflow (AAL0 & AAL1) (atmfCESBufUnderflow).
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAtmCesUDTPortStatisCounter13		1.3.6.1.4.1.2011.5.11.6.1.14
Number of inserted starvation cells (AAL0 & AAL1) due to reassembly buffer underflow.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAtmCesUDTPortStatisCounter14		1.3.6.1.4.1.2011.5.11.6.1.15
Number of times the Reassembly Buffer is re-initialized due to AAL1 start of structure is out of sync with port start of structure.This records the count of the number of events in which the AAL1 reassembler found that an SDT pointer is not where it is expected, and the pointer must be reacquired. This count is only meaningful for structured CES. (atmfCESPointerReframes).
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAtmCesUDTPortStatisCounter15		1.3.6.1.4.1.2011.5.11.6.1.16
Number of downstream 'lost cells' detected by the AAL1 sequence count algorithm (atmfCESLostCells).
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAtmCesUDTPortStatisOper		1.3.6.1.4.1.2011.5.11.6.1.17
The operating code of clearing the statistics of CES UDT port. Options: 1. clear(1) - Clear the statistics of CES UDT port
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	clear(1)

hwAtmCesUNIPortStatisTable		1.3.6.1.4.1.2011.5.11.7
The statistics table of CES UNI port. This table is used to collect the cell data of the UNI port. The index of this table is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwAtmCesUNIPortStatisEntry

hwAtmCesUNIPortStatisEntry		1.3.6.1.4.1.2011.5.11.7.1
The statistics table of CES UNI port. This table is used to collect the cell data of the UNI port. The index of this entry is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwAtmCesUNIPortStatisEntry

hwAtmCesUNIPortStatisCounter0		1.3.6.1.4.1.2011.5.11.7.1.1
Number of discarded cells due to output queue, ATM Receive Buffer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAtmCesUNIPortStatisCounter1		1.3.6.1.4.1.2011.5.11.7.1.2
Number of received cells with corrected HEC errors.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAtmCesUNIPortStatisCounter2		1.3.6.1.4.1.2011.5.11.7.1.3
Number of received cells with non-corrected HEC errors.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAtmCesUNIPortStatisCounter3		1.3.6.1.4.1.2011.5.11.7.1.4
Number of times cell delineation SYNC state is left, except when forced.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAtmCesUNIPortStatisCounter4		1.3.6.1.4.1.2011.5.11.7.1.5
Number of discarded cells due to ATM transmit buffer overflow.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAtmCesUNIPortStatisOper		1.3.6.1.4.1.2011.5.11.7.1.6
The operating code of clearing the statistics of CES UNI port. Options: 1. clear(1) - Clear the statistics of CES UNI port
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	clear(1)

hwAtmCesPortMaintTable		1.3.6.1.4.1.2011.5.11.8
The maintenace table of CES port. This table is used to set the loopback of the CES port, including the local loopback (LL), remote loopback (RL), and timeslot loopback. The timeslot loopback takes effect only on the CES-SDT port. The index of this table is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwAtmCesPortMaintEntry

hwAtmCesPortMaintEntry		1.3.6.1.4.1.2011.5.11.8.1
The maintenace table of CES port. This table is used to set the loopback of the CES port, including the local loopback (LL), remote loopback (RL), and timeslot loopback. The timeslot loopback takes effect only on the CES-SDT port. The index of this entry is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwAtmCesPortMaintEntry

hwAtmCesPortMaintLoop		1.3.6.1.4.1.2011.5.11.8.1.1
The looping test mode of CES port. Options: 1. noLoop(1) - No-loop test 2. localLoop(2) - Local-loop test 3. remoteLoop(3) - Remote-loop test 4. tsLocalLoop(4) - Ts-Localloop test 5. payLoadLoop(5) - Payload-loop test
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	noLoop(1), localLoop(2), remoteLoop(3), tsLocalLoop(4), payLoadLoop(5)

hwAtmCesPortMaintOper		1.3.6.1.4.1.2011.5.11.8.1.2
The oprating of looping test mode. Options: 1. set(1) - Set looping test 2. clear(2) - Clear looping test 3. notSupportQuery(-1) - Not support query
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	set(1), clear(2), notSupportQuery(-1)

hwAtmCesPortMaintSingleTimeslotId		1.3.6.1.4.1.2011.5.11.8.1.3
The timeslot number of single timeslot looping test.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..31

hwCesECSMonitorControlTable		1.3.6.1.4.1.2011.5.11.11
E1 monitor status control table. The indexes of this table are ifIndex and hwCesECSMonitorPeriodType.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwCesECSMonitorControlEntry

hwCesECSMonitorControlEntry		1.3.6.1.4.1.2011.5.11.11.1
E1 monitor status control table. The indexes of this entry are ifIndex and hwCesECSMonitorPeriodType.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwCesECSMonitorControlEntry

hwCesECSMonitorPeriodType		1.3.6.1.4.1.2011.5.11.11.1.1
Monitor period type. Options: 1. quarter(1) - Quarter 2. day(2) - Day
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	quarter(1), day(2)

hwCesECSMonitorStatusReal		1.3.6.1.4.1.2011.5.11.11.1.2
Current monitor status, 0:disable, 1:enable. Options: 1. disable(0) - Disable current monitor 2. enable(1) - Enable current monitor
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

hwCesECSMonitorStartTimeReal		1.3.6.1.4.1.2011.5.11.11.1.3
The start time of the monitor.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

hwCesECSMonitorStatusUserSet		1.3.6.1.4.1.2011.5.11.11.1.4
The monitor status set by user. Options: 1. disable(0) - Set monitor close 2. enable(1) - Set monitor open
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

hwCesECSMonitorStartTimeUserSet		1.3.6.1.4.1.2011.5.11.11.1.5
The start time of the monitor set by user.
Status: current	Access: read-write
OBJECT-TYPE
	DateAndTime

hwCesECSThresholdControlTable		1.3.6.1.4.1.2011.5.11.12
E1 threshold enable table. The indexes of this table are ifIndex and hwCesECSMonitorPeriodType.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwCesECSThresholdControlEntry

hwCesECSThresholdControlEntry		1.3.6.1.4.1.2011.5.11.12.1
E1 threshold enable table. The indexes of this entry are ifIndex and hwCesECSMonitorPeriodType.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwCesECSThresholdControlEntry

hwCesECSThresholdEnabled		1.3.6.1.4.1.2011.5.11.12.1.1
E1 threshold enable. Options: 1. disable(0) - Disable the E1 threshold 2. enable(1) - Enable the E1 threshold
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

hwCesECSThresholdTable		1.3.6.1.4.1.2011.5.11.13
E1 monitor threshold table. The indexes of this table are ifIndex and hwCesECSMonitorPeriodType.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwCesECSThresholdEntry

hwCesECSThresholdEntry		1.3.6.1.4.1.2011.5.11.13.1
E1 monitor threshold table. The indexes of this entry are ifIndex and hwCesECSMonitorPeriodType.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwCesECSThresholdEntry

hwCesECSThresholdLowES		1.3.6.1.4.1.2011.5.11.13.1.1
Errored seconds low threshold.
Status: current	Access: read-write
OBJECT-TYPE
	Gauge32

hwCesECSThresholdHighES		1.3.6.1.4.1.2011.5.11.13.1.2
Errored seconds high threshold.
Status: current	Access: read-write
OBJECT-TYPE
	Gauge32

hwCesECSThresholdSES		1.3.6.1.4.1.2011.5.11.13.1.3
Severely errored seconds threshold.
Status: current	Access: read-write
OBJECT-TYPE
	Gauge32

hwCesECSThresholdUAS		1.3.6.1.4.1.2011.5.11.13.1.4
Unavailable seconds threshold.
Status: current	Access: read-write
OBJECT-TYPE
	Gauge32

hwCesECSThresholdCESC		1.3.6.1.4.1.2011.5.11.13.1.5
Consecutive severely errored seconds threshold.
Status: current	Access: read-write
OBJECT-TYPE
	Gauge32

hwCesECSDateTable		1.3.6.1.4.1.2011.5.11.14
E1 perform monitor statistic table. The indexes of this table are ifIndex, hwCesECSMonitorPeriodType and hwCesECSMonitorStage.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwCesECSDateEntry

hwCesECSDateEntry		1.3.6.1.4.1.2011.5.11.14.1
E1 perform monitor statistic table. The indexes of this entry are ifIndex, hwCesECSMonitorPeriodType and hwCesECSMonitorStage.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwCesECSDateEntry

hwCesECSMonitorStage		1.3.6.1.4.1.2011.5.11.14.1.1
Perform monitor period stage, 0:current, 1:history Options: 1. current(0) - The perform monitor period is current 2. history(1) - The perform monitor period is history
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	current(0), history(1)

hwCesECSMonitorStageStartTime		1.3.6.1.4.1.2011.5.11.14.1.2
The start time of the monitor period.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

hwCesECSDataES		1.3.6.1.4.1.2011.5.11.14.1.3
Statistic of the errored seconds.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwCesECSDataSES		1.3.6.1.4.1.2011.5.11.14.1.4
Statistic of the severe errors.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwCesECSDataUAS		1.3.6.1.4.1.2011.5.11.14.1.5
Statistic of the unavailable seconds.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwAtmCesSubboardWorkModeTable		1.3.6.1.4.1.2011.5.11.15
CES board configration table. The indexes of this table are hwFrameIndex and hwSlotIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwAtmCesSubboardWorkModeEntry

hwAtmCesSubboardWorkModeEntry		1.3.6.1.4.1.2011.5.11.15.1
CES board configration table. The indexes of this entry are hwFrameIndex and hwSlotIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwAtmCesSubboardWorkModeEntry

hwAtmCesSubboardWorkMode		1.3.6.1.4.1.2011.5.11.15.1.1
CES subboard working mode. Options: 1. loadsharing(1) - The CES subboard works in loadsharing mode 2. activestandby(2) - The CES subboard works in activestandby mode
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	loadsharing(1), activestandby(2)

hwCesECSThresholdParameterTable		1.3.6.1.4.1.2011.5.11.16
OBJECT IDENTIFIER

hwCesErroredSeconds		1.3.6.1.4.1.2011.5.11.16.1
Errored seconds degrade threshold.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..3600

hwCesConsecutiveSeverelyErroredSeconds		1.3.6.1.4.1.2011.5.11.16.2
Consecutive severely errored seconds degrade threshold.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..60

hwCesDegradedMinutes		1.3.6.1.4.1.2011.5.11.16.3
Degraded Minutes degrade threshold.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..60

hwCesPortUnconditionalLineFailureErroredRate		1.3.6.1.4.1.2011.5.11.16.4
Line Unconditional Blooey Errored Rate threshold.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1000..9999

hwCesPortOptionalLineFailureErroredRate		1.3.6.1.4.1.2011.5.11.16.5
Line Conditional Blooey Errored Rate threshold.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	10000..99999

hwCesPortLineDisturbanceTransientErroredRate		1.3.6.1.4.1.2011.5.11.16.6
Line Temporary Disturb Errored Rate threshold.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	100000..999999

hwCesPortG704ExcessiveFrameSlipfrequency		1.3.6.1.4.1.2011.5.11.16.7
Overfull Frame Slip threshold.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..100

hwCesDefinedErroredSeconds		1.3.6.1.4.1.2011.5.11.16.8
Errored Seconds Define threshold.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..100

hwCesDefinedSeverelyErroredSeconds		1.3.6.1.4.1.2011.5.11.16.9
Severely Errored Seconds Define threshold.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..100

hwCesDefinedDegradedMinutes		1.3.6.1.4.1.2011.5.11.16.10
Degraded Minutes Define threshold.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..256

hwAtmCesPortCESoPCLKTable		1.3.6.1.4.1.2011.5.11.17
Adaptive clock source configuration table. The indexes of this table are hwFrameIndex, hwSlotIndex and hwAtmCesPortCESoPCLKIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwAtmCesPortCESoPCLKEntry

hwAtmCesPortCESoPCLKEntry		1.3.6.1.4.1.2011.5.11.17.1
Adaptive clock source configuration table. The indexes of this entry are hwFrameIndex, hwSlotIndex and hwAtmCesPortCESoPCLKIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwAtmCesPortCESoPCLKEntry

hwAtmCesPortCESoPCLKIndex		1.3.6.1.4.1.2011.5.11.17.1.1
The index of adaptive clock source.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..15

hwAtmCesPortCESoPCLKBindPW		1.3.6.1.4.1.2011.5.11.17.1.2
Set and get the Connection ID binding with the adaptive clock source.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..4294967294

hwAtmCesPortCESoPCLKSetFlag		1.3.6.1.4.1.2011.5.11.17.1.3
Get and set the configuration of adaptive clock source. Options: 1. null(1) - The clock source is null 2. exist(2) - The clock source exist
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	null(1), exist(2)

hwAtmCesPortCESoPCLKState		1.3.6.1.4.1.2011.5.11.17.1.4
Get the running state of adaptive clock source. Options: 1. normal(1) - Normal state 2. fault(2) - Fault state
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	normal(1), fault(2)

hwAtmCesPortCESoPLineCLKPortId		1.3.6.1.4.1.2011.5.11.17.1.5
Set and get the Port ID binding with the Line clock source.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..15

hwAtmCesPortCESoPLineCLKState		1.3.6.1.4.1.2011.5.11.17.1.6
Get the running state of Line clock source. Options: 1. normal(1) - Normal state 2. fault(2) - Fault state
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	normal(1), fault(2)

hwCesTDMVCLCfgTable		1.3.6.1.4.1.2011.5.11.18
TDM VCL configuration table. The indexes of this table are hwTDMVCLID and ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwCesTDMVCLCfgEntry

hwCesTDMVCLCfgEntry		1.3.6.1.4.1.2011.5.11.18.1
TDM VCL configuration table. The indexes of this entry are hwTDMVCLID and ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwCesTDMVCLCfgEntry

hwTDMVCLID		1.3.6.1.4.1.2011.5.11.18.1.1
TDM VCL ID.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	0..4294967294

hwTDMVCLType		1.3.6.1.4.1.2011.5.11.18.1.2
TDM VCL type. Options: 1. satop(1) - The TDM VCL Type is satop 2. cesop(2) - The TDM VCL Type is cesop
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	satop(1), cesop(2)

hwTDMVCLTimeslot		1.3.6.1.4.1.2011.5.11.18.1.3
TDM timeslot, it must be set if hwTDMVCLType is set to be cesop.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

hwTDMVCLRowStatus		1.3.6.1.4.1.2011.5.11.18.1.4
Row operation node . Running status cannot be deleted.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

hwCesTrapsVbOids		1.3.6.1.4.1.2011.5.11.19
OBJECT IDENTIFIER

hwAtmCesPortStatus		1.3.6.1.4.1.2011.5.11.19.1
Indicate the port state. Options: 1. normal(1) - The port is in normal state 2. test(2) - The port is in test state 3. idle(3) - The port is in idle state 4. notExisted(4) - The port doesn't exist 5. fail(5) - The port is in fail state 6. block(6) - The port is in block state 7. maintain(7) - The port is in maintain state 8. loopback(11) - The port is in loopback state
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	normal(1), test(2), idle(3), notExisted(4), fail(5), block(6), maintain(7), loopback(11)

hwCesTraps		1.3.6.1.4.1.2011.5.11.20
OBJECT IDENTIFIER

hwCesCommonTraps		1.3.6.1.4.1.2011.5.11.20.1
OBJECT IDENTIFIER

hwCesCommonTrapsPrefix		1.3.6.1.4.1.2011.5.11.20.1.0
OBJECT IDENTIFIER

hwCesPortStatusTrap		1.3.6.1.4.1.2011.5.11.20.1.0.1
This trap message is generated when Ces port status changed.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwCesBoardWorkModeChangeTrap		1.3.6.1.4.1.2011.5.11.20.1.0.2
This trap message is generated when E1T1 board work mode changed.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwCesPortWorkModeChangeTrap		1.3.6.1.4.1.2011.5.11.20.1.0.3
This trap message is generated when Ces port work mode changed.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwCesAlarmTraps		1.3.6.1.4.1.2011.5.11.20.2
OBJECT IDENTIFIER

hwCesAlarmTrapsPrefix		1.3.6.1.4.1.2011.5.11.20.2.0
OBJECT IDENTIFIER

hwCesPortSignalLossAlarmTrap		1.3.6.1.4.1.2011.5.11.20.2.0.1
This trap message is generated when Loss of signal occurs at the E1/T1 port.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwCesFrameLossAlarmTrap		1.3.6.1.4.1.2011.5.11.20.2.0.2
This trap message is generated when Loss of frame alignment occurs at the E1/T1 port.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwCesRemoteAlarmReceivedAlarmTrap		1.3.6.1.4.1.2011.5.11.20.2.0.3
This trap message is generated when remote alarm occurs at the E1/T1 port.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwCesMultiframeLossAlarmTrap		1.3.6.1.4.1.2011.5.11.20.2.0.4
This trap message is generated when Loss of multiframe alignment occurs at the E1/T1 port.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwCesSignalOccurAlarmTrap		1.3.6.1.4.1.2011.5.11.20.2.0.5
This trap message is generated when signal occurs at the E1/T1 port.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwCesCRC4ErrorOccurAlarmTrap		1.3.6.1.4.1.2011.5.11.20.2.0.6
This trap message is generated when CRC4 error occurs at the E1/T1 port.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwCesLOSRecoverAlarmTrap		1.3.6.1.4.1.2011.5.11.20.2.0.7
This trap message is generated when Loss of signal(LOS) recover at the E1/T1 port.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwCesFrameRecoverAlarmTrap		1.3.6.1.4.1.2011.5.11.20.2.0.8
This trap message is generated when Loss of frame recover at the E1/T1 port.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwCesRemoteAlarmRecoverAlarmTrap		1.3.6.1.4.1.2011.5.11.20.2.0.9
This trap message is generated when Remote alarm recover at the E1/T1 port.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwCesMultiframeRecoverAlarmTrap		1.3.6.1.4.1.2011.5.11.20.2.0.10
This trap message is generated when Loss of multiframe alignment recover at the E1/T1 port.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwCesSignalRecoverAlarmTrap		1.3.6.1.4.1.2011.5.11.20.2.0.11
This trap message is generated when signal recover at the E1/T1 port.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwCesCRC4RecoverAlarmTrap		1.3.6.1.4.1.2011.5.11.20.2.0.12
This trap message is generated when CRC4 recover at the E1/T1 port.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwCesACMClockRestoreAlarmTrap		1.3.6.1.4.1.2011.5.11.20.2.0.13
This trap message is generated when ACM clock restore.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwCesACMClockFaultAlarmTrap		1.3.6.1.4.1.2011.5.11.20.2.0.14
This trap message is generated when ACM clock fault.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE