HUAWEI-ADSLNNI-MIB

File: HUAWEI-ADSLNNI-MIB.mib (55698 bytes)

Imported modules

SNMPv2-SMI	IF-MIB	HUAWEI-DEVICE-MIB
HC-PerfHist-TC-MIB	ADSL2-LINE-TC-MIB	HUAWEI-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	Unsigned32
NOTIFICATION-TYPE	Integer32	Counter32
ifIndex	hwFrameIndex	hwSlotIndex
HCPerfTimeElapsed	Adsl2Unit	Adsl2TransmissionModeType
Adsl2Direction	Adsl2PowerMngState	Adsl2InitResult
Adsl2Tssi	Adsl2LastTransmittedState	Adsl2LineStatus
Adsl2ChAtmStatus	Adsl2ChPtmStatus	huaweiUtility

Defined Types

HwAdslnniPvcCfgEntry
SEQUENCE
	hwAdslnniPvcVpi	Integer32
	hwAdslnniPvcVci	Integer32

HwAdslnniInventoryEntry
SEQUENCE
	hwAdslnniLInvUnit	Adsl2Unit
	hwAdslnniLInvG994VendorId	OCTET STRING
	hwAdslnniLInvSystemVendorId	OCTET STRING
	hwAdslnniLInvVersionNumber	OCTET STRING
	hwAdslnniLInvSerialNumber	OCTET STRING
	hwAdslnniLInvSelfTestResult	Unsigned32
	hwAdslnniLInvTransmissionCapabilities	Adsl2TransmissionModeType

HwAdslnniLineEntry
SEQUENCE
	hwAdslnniLineStatusAtuTransSys	Adsl2TransmissionModeType
	hwAdslnniLineStatusPwrMngState	Adsl2PowerMngState
	hwAdslnniLineStatusInitResult	Adsl2InitResult
	hwAdslnniLineStatusLastStateDs	Adsl2LastTransmittedState
	hwAdslnniLineStatusLastStateUs	Adsl2LastTransmittedState
	hwAdslnniLineStatusAtur	Adsl2LineStatus
	hwAdslnniLineStatusAtuc	Adsl2LineStatus
	hwAdslnniLineStatusLnAttenDs	Unsigned32
	hwAdslnniLineStatusLnAttenUs	Unsigned32
	hwAdslnniLineStatusSigAttenDs	Unsigned32
	hwAdslnniLineStatusSigAttenUs	Unsigned32
	hwAdslnniLineStatusSnrMarginDs	Integer32
	hwAdslnniLineStatusSnrMarginUs	Integer32
	hwAdslnniLineStatusAttainableRateDs	Unsigned32
	hwAdslnniLineStatusAttainableRateUs	Unsigned32
	hwAdslnniLineStatusActPsdDs	Integer32
	hwAdslnniLineStatusActPsdUs	Integer32
	hwAdslnniLineStatusActAtpDs	Integer32
	hwAdslnniLineStatusActAtpUs	Integer32

HwAdslnniChannelStatusEntry
SEQUENCE
	hwadslnniChStatusUnit	Adsl2Unit
	hwadslnniChStatusChannelNum	Unsigned32
	hwadslnniChStatusActDataRate	Unsigned32
	hwadslnniChStatusPrevDataRate	Unsigned32
	hwadslnniChStatusActDelay	Unsigned32
	hwadslnniChStatusAtmStatus	Adsl2ChAtmStatus
	hwadslnniChStatusPtmStatus	Adsl2ChPtmStatus
	hwadslnniChStatusINP	Unsigned32
	hwadslnniChStatusRSRedundancy	Unsigned32
	hwadslnniChStatusRSSymbols	Unsigned32
	hwadslnniChStatusInterDepth	Unsigned32
	hwadslnniChStatusSymbolLength	Unsigned32
	hwadslnniChStatusRSSize	Unsigned32

HwAdslnniSCStatusEntry
SEQUENCE
	hwAdslnniSCStatusDirection	Adsl2Direction
	hwadslnniSCStatusSnr	OCTET STRING
	hwadslnniSCStatusBitsAlloc	OCTET STRING
	hwadslnniSCStatusGainAlloc	OCTET STRING
	hwadslnniSCStatusTssi	Adsl2Tssi

HwAdslnniStatisticsEntry
SEQUENCE
	hwAdslnniRxFrameCount	Counter32
	hwAdslnniRxBytesCount	Counter32
	hwAdslnniTxFrameCount	Counter32
	hwAdslnniTxBytesCount	Counter32
	hwAdslnniStatisticsClear	INTEGER

HwAdslnniPMLineCurrEntry
SEQUENCE
	hwadslnniPMLCurrUnit	Adsl2Unit
	hwadslnniPMLCurrValidIntervals	Unsigned32
	hwadslnniPMLCurrInvalidIntervals	Unsigned32
	hwadslnniPMLCurr15MTimeElapsed	HCPerfTimeElapsed
	hwadslnniPMLCurr15MFecs	Counter32
	hwadslnniPMLCurr15MEs	Counter32
	hwadslnniPMLCurr15MSes	Counter32
	hwadslnniPMLCurr15MLoss	Counter32
	hwadslnniPMLCurr15MUas	Counter32

HwAdslnniPMLineCurrInitEntry
SEQUENCE
	hwAdslnniPMLCurrInit15MTimeElapsed	Unsigned32
	hwAdslnniPMLCurrInit15MFullInits	Unsigned32
	hwAdslnniPMLCurrInit15MFailedFullInits	Unsigned32
	hwAdslnniPMLCurrInit15MShortInits	Unsigned32
	hwAdslnniPMLCurrInit15MFailedShortInits	Unsigned32

HwAdslnniPMChCurrEntry
SEQUENCE
	hwadslnniPMChCurrUnit	Adsl2Unit
	hwadslnniPMChCurrValidIntervals	Unsigned32
	hwadslnniPMChCurrInvalidIntervals	Unsigned32
	hwadslnniPMChCurr15MTimeElapsed	HCPerfTimeElapsed
	hwadslnniPMChCurr15MCodingViolations	Unsigned32
	hwadslnniPMChCurr15MCorrectedBlocks	Unsigned32

Defined Values

hwAdslnniMIB		1.3.6.1.4.1.2011.6.143
This MIB is used for defining Huawei's ADSLNNI management MIB objects.
MODULE-IDENTITY

hwAdslnni		1.3.6.1.4.1.2011.6.143.1
OBJECT IDENTIFIER

hwAdslnniCfg		1.3.6.1.4.1.2011.6.143.1.1
OBJECT IDENTIFIER

hwAdslnniStatistics		1.3.6.1.4.1.2011.6.143.1.2
OBJECT IDENTIFIER

hwAdslnniPerStatis		1.3.6.1.4.1.2011.6.143.1.3
OBJECT IDENTIFIER

hwAdslnniPMLine		1.3.6.1.4.1.2011.6.143.1.3.1
OBJECT IDENTIFIER

hwAdslnniPMChannel		1.3.6.1.4.1.2011.6.143.1.3.2
OBJECT IDENTIFIER

hwAdslnniPvcCfgTable		1.3.6.1.4.1.2011.6.143.1.1.1
Table hwAdslnniPvcCfgTable config the PVC of ADSLNNI is used to set and query the ADSL upstream VPI/VCI. This table is used for the bonding group instead of the ADSL port. Each bonding group corresponds to one PVC and the PVC takes effect only in the ATM bonding mode. The index of this table is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwAdslnniPvcCfgEntry

hwAdslnniPvcCfgEntry		1.3.6.1.4.1.2011.6.143.1.1.1.1
Table hwAdslnniPvcCfgTable config the PVC of ADSLNNI is used to set and query the ADSL upstream VPI/VCI. This table is used for the bonding group instead of the ADSL port. Each bonding group corresponds to one PVC and the PVC takes effect only in the ATM bonding mode. The index of this entry is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwAdslnniPvcCfgEntry

hwAdslnniPvcVpi		1.3.6.1.4.1.2011.6.143.1.1.1.1.1
The VPI of the adslnni port.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..255

hwAdslnniPvcVci		1.3.6.1.4.1.2011.6.143.1.1.1.1.2
The VCI of the adslnni port.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	32..255

hwAdslnniInventoryTable		1.3.6.1.4.1.2011.6.143.1.1.2
The table hwAdslnniInventoryTable contains inventory of the ADSL2 units. The indexes of this table are ifIndex and hwAdslnniLInvUnit.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwAdslnniInventoryEntry

hwAdslnniInventoryEntry		1.3.6.1.4.1.2011.6.143.1.1.2.1
The table hwAdslnniInventoryTable contains inventory of the ADSL2 units. The indexes of this entry are ifIndex and hwAdslnniLInvUnit.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwAdslnniInventoryEntry

hwAdslnniLInvUnit		1.3.6.1.4.1.2011.6.143.1.1.2.1.1
The termination unit atuc(1) or atur(2).
Status: current	Access: not-accessible
OBJECT-TYPE
	Adsl2Unit

hwAdslnniLInvG994VendorId		1.3.6.1.4.1.2011.6.143.1.1.2.1.2
The ATU G.994.1 Vendor ID as inserted in the G.994.1 CL/CLR message. It consists of 8 binary octets, including a country code followed by a (regionally allocated) provider code, as defined in Recommendation T.35.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(8)

hwAdslnniLInvSystemVendorId		1.3.6.1.4.1.2011.6.143.1.1.2.1.3
The ATU System Vendor ID (identifies the ATU system integrator) as inserted in the Overhead Messages (both ATUs for G.992.3 and G.992.4) or in the Embedded Operations Channel (only ATU-R in G.992.1 and G.992.2). It consists of 8 binary octets, with the same format as used for Adsl2InvG994VendorId.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(8)

hwAdslnniLInvVersionNumber		1.3.6.1.4.1.2011.6.143.1.1.2.1.4
The ATU version number (vendor-specific information) as inserted in the Overhead Messages (both ATUs for G.992.3 and G.992.4) or in the Embedded Operations Channel (only ATU-R in G.992.1 and G.992.2). It consists of up to 16 binary octets.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..16)

hwAdslnniLInvSerialNumber		1.3.6.1.4.1.2011.6.143.1.1.2.1.5
The ATU serial number (vendor-specific information) as inserted in the Overhead Messages (both ATUs for G.992.3 and G.992.4) or in the Embedded Operations Channel (only ATU-R in G.992.1 and G.992.2). It is vendor-specific information. It consists of up to 32 ASCII characters.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwAdslnniLInvSelfTestResult		1.3.6.1.4.1.2011.6.143.1.1.2.1.6
The ATU self-test result, coded as a 32-bit value. The most significant octet of the result is '0' if the self-test passed, and '1' if the self-test failed. The interpretation of the other octets is vendor discretionary.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwAdslnniLInvTransmissionCapabilities		1.3.6.1.4.1.2011.6.143.1.1.2.1.7
The ATU transmission system capability list of the different coding types. It is coded in a bit-map representation with 1 or more bits set. A bit set to '1' means that the ATU supports the respective coding. The value may be derived from the handshaking procedures defined in G.994.1. A set of ADSL2 line transmission modes, with one bit per mode.
Status: current	Access: read-only
OBJECT-TYPE
	Adsl2TransmissionModeType

hwAdslnniLineTable		1.3.6.1.4.1.2011.6.143.1.1.3
The table hwAdslnniLineTable contains configuration, commands, and status parameters of the ADSL2 line. The index of this table is an interface index where the interface has an ifType of adslnni.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwAdslnniLineEntry

hwAdslnniLineEntry		1.3.6.1.4.1.2011.6.143.1.1.3.1
The table hwAdslnniLineTable contains configuration, commands, and status parameters of the ADSL2 line. The index of this entry is an interface index where the interface has an ifType of adslnni.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwAdslnniLineEntry

hwAdslnniLineStatusAtuTransSys		1.3.6.1.4.1.2011.6.143.1.1.3.1.1
The ATU Transmission System (ATS) in use. It is coded in a bit-map representation with only a single bit set to '1' (the selected coding for the ADSL line). This parameter may be derived from the handshaking procedures defined in Recommendation G.994.1. A set of ADSL2 line transmission modes, with one bit per mode.
Status: current	Access: read-only
OBJECT-TYPE
	Adsl2TransmissionModeType

hwAdslnniLineStatusPwrMngState		1.3.6.1.4.1.2011.6.143.1.1.3.1.2
The current power management state. Options: 1. L0(1) - Synchronized and full transmission (i.e., Showtime). 2. L1(2) - Low Power with reduced net data rate (G.992.2 only). 3. L2(3) - Low Power with reduced net data rate (G.992.3 and G.992.4 only). 4. L3(4) - No power.
Status: current	Access: read-only
OBJECT-TYPE
	Adsl2PowerMngState

hwAdslnniLineStatusInitResult		1.3.6.1.4.1.2011.6.143.1.1.3.1.3
Indicates the result of the last full initialization performed on the line. Options: 1. noFail(0) -Indicates that no abnormity occurs. 2. configError(1) -Indicates that the configuration is incorrect. 3. configNotFeasible(2) -Indicates that the configuration is improper. 4. commFail(3) -Indicates that the communication fails. 5. noPeerAtu(4) -Indicates that the peer ATU does not exist. 6. otherCause(5) -Indicates that an unknown error occurs.
Status: current	Access: read-only
OBJECT-TYPE
	Adsl2InitResult

hwAdslnniLineStatusLastStateDs		1.3.6.1.4.1.2011.6.143.1.1.3.1.4
The last successful transmitted initialization state in the downstream direction in the last full initialization performed on the line.
Status: current	Access: read-only
OBJECT-TYPE
	Adsl2LastTransmittedState

hwAdslnniLineStatusLastStateUs		1.3.6.1.4.1.2011.6.143.1.1.3.1.5
The last successful transmitted initialization state in the upstream direction in the last full initialization performed on the line.
Status: current	Access: read-only
OBJECT-TYPE
	Adsl2LastTransmittedState

hwAdslnniLineStatusAtur		1.3.6.1.4.1.2011.6.143.1.1.3.1.6
Indicates current state (existing failures) of the ATU-R. This is a bit-map of possible conditions.
Status: current	Access: read-only
OBJECT-TYPE
	Adsl2LineStatus

hwAdslnniLineStatusAtuc		1.3.6.1.4.1.2011.6.143.1.1.3.1.7
Indicates current state (existing failures) of the ATU-C. This is a bit-map of possible conditions.
Status: current	Access: read-only
OBJECT-TYPE
	Adsl2LineStatus

hwAdslnniLineStatusLnAttenDs		1.3.6.1.4.1.2011.6.143.1.1.3.1.8
The measured difference in the total power transmitted by the ATU-C and the total power received by the ATU-R over all sub- carriers during diagnostics mode and initialization. It ranges from 0 to 1270 units of 0.1 dB (physical values are 0 to 127 dB). A special value of 0x7FFFFFFF (2147483647) indicates the line attenuation is out of range to be represented. A special value of 0x7FFFFFFE (2147483646) indicates the line attenuation measurement is currently unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..1270 \| 2147483646 \| 2147483647

hwAdslnniLineStatusLnAttenUs		1.3.6.1.4.1.2011.6.143.1.1.3.1.9
The measured difference in the total power transmitted by the ATU-R and the total power received by the ATU-C over all sub- carriers during diagnostics mode and initialization. It ranges from 0 to 1270 units of 0.1 dB (physical values are 0 to 127 dB). A special value of 0x7FFFFFFF (2147483647) indicates the line attenuation is out of range to be represented. A special value of 0x7FFFFFFE (2147483646) indicates the line attenuation measurement is currently unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..1270 \| 2147483646 \| 2147483647

hwAdslnniLineStatusSigAttenDs		1.3.6.1.4.1.2011.6.143.1.1.3.1.10
The measured difference in the total power transmitted by the ATU-C and the total power received by the ATU-R over all sub- carriers during Showtime. It ranges from 0 to 1270 units of 0.1 dB (physical values are 0 to 127 dB). A special value of 0x7FFFFFFF (2147483647) indicates the signal attenuation is out of range to be represented. A special value of 0x7FFFFFFE (2147483646) indicates the signal attenuation measurement is currently unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..1270 \| 2147483646 \| 2147483647

hwAdslnniLineStatusSigAttenUs		1.3.6.1.4.1.2011.6.143.1.1.3.1.11
The measured difference in the total power transmitted by the ATU-R and the total power received by the ATU-C over all sub- carriers during Showtime. It ranges from 0 to 1270 units of 0.1 dB (physical values are 0 to 127 dB). A special value of 0x7FFFFFFF (2147483647) indicates the signal attenuation is out of range to be represented. A special value of 0x7FFFFFFE (2147483646) indicates the signal attenuation measurement is currently unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..1270 \| 2147483646 \| 2147483647

hwAdslnniLineStatusSnrMarginDs		1.3.6.1.4.1.2011.6.143.1.1.3.1.12
Downstream SNR Margin is the maximum increase in dB of the noise power received at the ATU-R, such that the BER requirements are met for all downstream bearer channels. It ranges from -640 to 630 units of 0.1 dB (physical values are -64 to 63 dB). A special value of 0x7FFFFFFF (2147483647) indicates the SNR Margin is out of range to be represented. A special value of 0x7FFFFFFE (2147483646) indicates the SNR Margin measurement is currently unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-640..630 \| 2147483646 \| 2147483647

hwAdslnniLineStatusSnrMarginUs		1.3.6.1.4.1.2011.6.143.1.1.3.1.13
Upstream SNR Margin is the maximum increase in dB of the noise power received at the ATU-C, such that the BER requirements are met for all downstream bearer channels. It ranges from -640 to 630 units of 0.1 dB (physical values are -64 to 63 dB). A special value of 0x7FFFFFFF (2147483647) indicates the SNR Margin is out of range to be represented. A special value of 0x7FFFFFFE (2147483646) indicates the SNR Margin measurement is currently unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-640..630 \| 2147483646 \| 2147483647

hwAdslnniLineStatusAttainableRateDs		1.3.6.1.4.1.2011.6.143.1.1.3.1.14
Maximum Attainable Data Rate Downstream. The maximum downstream net data rate currently attainable by the ATU-C transmitter and the ATU-R receiver, coded in bits/second.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwAdslnniLineStatusAttainableRateUs		1.3.6.1.4.1.2011.6.143.1.1.3.1.15
Maximum Attainable Data Rate Upstream. The maximum upstream net data rate currently attainable by the ATU-R transmitter and the ATU-C receiver, coded in bits/second.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwAdslnniLineStatusActPsdDs		1.3.6.1.4.1.2011.6.143.1.1.3.1.16
Actual Power Spectrum Density (PSD) Downstream. The average downstream transmit PSD over the sub-carriers used for downstream. It ranges from -900 to 0 units of 0.1 dB (physical values are -90 to 0 dBm/Hz). A value of 0x7FFFFFFF (2147483647) indicates the measurement is out of range to be represented.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-900..0 \| 2147483647

hwAdslnniLineStatusActPsdUs		1.3.6.1.4.1.2011.6.143.1.1.3.1.17
Actual Power Spectrum Density (PSD) Upstream. The average upstream transmit PSD over the sub-carriers used for upstream. It ranges from -900 to 0 units of 0.1 dB (physical values are -90 to 0 dBm/Hz). A value of 0x7FFFFFFF (2147483647) indicates the measurement is out of range to be represented.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-900..0 \| 2147483647

hwAdslnniLineStatusActAtpDs		1.3.6.1.4.1.2011.6.143.1.1.3.1.18
Actual Aggregate Transmit Power Downstream. The total amount of transmit power delivered by the ATU-C at the U-C reference point, at the instant of measurement. It ranges from -310 to 310 units of 0.1 dB (physical values are -31 to 31 dBm). A value of 0x7FFFFFFF (2147483647) indicates the measurement is out of range to be represented.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-310..310 \| 2147483647

hwAdslnniLineStatusActAtpUs		1.3.6.1.4.1.2011.6.143.1.1.3.1.19
Actual Aggregate Transmit Power Upstream. The total amount of transmit power delivered by the ATU-R at the U-R reference point, at the instant of measurement. It ranges from -310 to 310 units of 0.1 dB (physical values are -31 to 31 dBm). A value of 0x7FFFFFFF (2147483647) indicates the measurement is out of range to be represented.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-310..310 \| 2147483647

hwAdslnniChannelStatusTable		1.3.6.1.4.1.2011.6.143.1.1.4
The table hwAdslnniChannelStatusTable contains status parameters of the ADSL2 channel. This table contains live data from equipment. The indexes of this table are ifIndex and hwadslnniChStatusUnit.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwAdslnniChannelStatusEntry

hwAdslnniChannelStatusEntry		1.3.6.1.4.1.2011.6.143.1.1.4.1
The table hwAdslnniChannelStatusTable contains status parameters of the ADSL2 channel. This table contains live data from equipment. The indexes of this entry are ifIndex and hwadslnniChStatusUnit.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwAdslnniChannelStatusEntry

hwadslnniChStatusUnit		1.3.6.1.4.1.2011.6.143.1.1.4.1.1
The termination unit ATUC(1) or ATUR(2).
Status: current	Access: not-accessible
OBJECT-TYPE
	Adsl2Unit

hwadslnniChStatusChannelNum		1.3.6.1.4.1.2011.6.143.1.1.4.1.2
Provides the bearer channel number associated with this row (i.e., the channel ifIndex). This enables determining the channel configuration profile and the channel thresholds profile applicable for this bearer channel.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwadslnniChStatusActDataRate		1.3.6.1.4.1.2011.6.143.1.1.4.1.3
The actual net data rate that the bearer channel is operating at, if in L0 power management state. In L1 or L2 states, it relates to the previous L0 state. The data rate is coded in bit/s.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..200000000

hwadslnniChStatusPrevDataRate		1.3.6.1.4.1.2011.6.143.1.1.4.1.4
The previous net data rate that the bearer channel was operating at just before the latest rate change event. This could be a full or short initialization, fast retrain, DRA or power management transitions, excluding transitions between L0 state and L1 or L2 states. The data rate is coded in bit/s.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..200000000

hwadslnniChStatusActDelay		1.3.6.1.4.1.2011.6.143.1.1.4.1.5
The actual one-way interleaving delay introduced by the PMS-TC in the direction of the bearer channel, if in L0 power management state. In L1 or L2 states, it relates to the previous L0 state. It is coded in ms (rounded to the nearest ms).
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..8176

hwadslnniChStatusAtmStatus		1.3.6.1.4.1.2011.6.143.1.1.4.1.6
Indicates current state (existing failures) of the ADSL channel in case its Data Path is ATM. This is a bit-map of possible conditions. The various bit positions are: noFailure(0) - This bit position positively reports that no defect or failure exists. noCellDelineation(1) - The link was successfully initialized, but cell delineation was never acquired on the associated ATM data path. lossOfCellDelineation(2) - Loss of cell delineation on the associated ATM data path. In case the channel is not of ATM Data Path the object is set to '0'.
Status: current	Access: read-only
OBJECT-TYPE
	Adsl2ChAtmStatus

hwadslnniChStatusPtmStatus		1.3.6.1.4.1.2011.6.143.1.1.4.1.7
Indicates current state (existing failures) of the ADSL channel in case its Data Path is PTM. This is a bit-map of possible conditions. The various bit positions are: noFailure(0) - This bit position positively reports that no defect or failure exists. outOfSync (1) - Out of synchronization. In case the channel is not of PTM Data Path the object is set to '0'.
Status: current	Access: read-only
OBJECT-TYPE
	Adsl2ChPtmStatus

hwadslnniChStatusINP		1.3.6.1.4.1.2011.6.143.1.1.4.1.8
The actual impulse noise protection (INP) on the bearer channel in L0 state.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..254

hwadslnniChStatusRSRedundancy		1.3.6.1.4.1.2011.6.143.1.1.4.1.9
The actual number of Reed-Solomon redundancy bytes per codeword used in the latency path in which the bearer channel is transported. The value is coded in bytes. Range: 0-16. The value 0 indicates no Reed-Solomon coding.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..16

hwadslnniChStatusRSSymbols		1.3.6.1.4.1.2011.6.143.1.1.4.1.10
The DMT Symbol number per codeword used in the latency path in which the bearer channel is transported.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwadslnniChStatusInterDepth		1.3.6.1.4.1.2011.6.143.1.1.4.1.11
The actual Reed-Solomon codeword size used in the latency path in which the bearer channel is transported. The value ranges from 1 to 4096 by step of 1. The value 1 indicates no interleaving.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..4096

hwadslnniChStatusSymbolLength		1.3.6.1.4.1.2011.6.143.1.1.4.1.12
The actual number of bits per symbol assigned to the latency path in which the bearer channel is transported. This value does not include trellis overhead.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..65535

hwadslnniChStatusRSSize		1.3.6.1.4.1.2011.6.143.1.1.4.1.13
The actual Reed-Solomon codeword size used in the latency path in which the bearer channel is transported.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..255

hwAdslnniSCStatusTable		1.3.6.1.4.1.2011.6.143.1.1.5
The table hwadslnniSCStatusTable contains status parameters of the ADSL2 sub-carriers. The indexes of this table are ifIndex and hwAdslnniSCStatusDirection.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwAdslnniSCStatusEntry

hwAdslnniSCStatusEntry		1.3.6.1.4.1.2011.6.143.1.1.5.1
The table hwadslnniSCStatusTable contains status parameters of the ADSL2 sub-carriers. The indexes of this entry are ifIndex and hwAdslnniSCStatusDirection.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwAdslnniSCStatusEntry

hwAdslnniSCStatusDirection		1.3.6.1.4.1.2011.6.143.1.1.5.1.1
The direction of the sub-carrier is either upstream or downstream.
Status: current	Access: not-accessible
OBJECT-TYPE
	Adsl2Direction

hwadslnniSCStatusSnr		1.3.6.1.4.1.2011.6.143.1.1.5.1.2
The SNR Margin per sub-carrier, expressing the ratio between the received signal power and received noise power per subscriber. It is an array of 512 octets, designed for supporting up to 512 (downstream) sub-carriers. The number of utilized octets on downstream direction depends on NSCds, and on upstream direction it depends on NSCus. This value is referred here as NSC. Octet i (0 <= i < NSC) is set to a value in the range 0 to 254 to indicate that the respective downstream or upstream sub- carrier i has SNR of: (-32 + Adsl2SubcarrierSnr(i)/2) in dB (i.e., -32 to 95dB). The special value 255 means that no measurement could be done for the subcarrier because it is out of the PSD mask passband or that the noise PSD is out of range to be represented. Each value in this array is 8 bits wide.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..512)

hwadslnniSCStatusBitsAlloc		1.3.6.1.4.1.2011.6.143.1.1.5.1.3
The bits allocation per sub-carrier. An array of 256 octets (512 nibbles), designed for supporting up to 512 (downstream) sub-carriers. The number of utilized nibbles on downstream direction depends on NSCds, and on upstream direction it depends on NSCus. This value is referred here as NSC. Nibble i (0 <= i < NSC) is set to a value in the range 0 to 15 to indicate that the respective downstream or upstream sub-carrier i has the same amount of bits allocation.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

hwadslnniSCStatusGainAlloc		1.3.6.1.4.1.2011.6.143.1.1.5.1.4
The gain allocation per sub-carrier. An array of 512 16-bits values, designed for supporting up to 512 (downstream) sub- carriers. The number of utilized octets on downstream direction depends on NSCds, and on upstream direction it depends on NSCus. This value is referred here as NSC. Value i (0 <= i < NSC) is in the range 0 to 4093 to indicate that the respective downstream or upstream sub-carrier i has the same amount of gain value. The gain value is represented as a multiple of 1/512 on linear scale. Each value in this array is 16 bits wide and is stored in big endian format.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..1024)

hwadslnniSCStatusTssi		1.3.6.1.4.1.2011.6.143.1.1.5.1.5
The transmit spectrum shaping (TSSi) breakpoints expressed as the set of breakpoints exchanged during G.994.1. Each breakpoint is a pair of values occupying 3 octets with the following structure: First 2 octets - Index of the subcarrier used in the context of the breakpoint. Third octet - The shaping parameter at the breakpoint. Subcarrier index is an unsigned number in the range 1 to either NSCds (downstream direction) or NSCus (upstream direction). The shaping parameter value is in the range 0 to 127 (units of -0.5dB). The special value 127 indicates that the subcarrier is not transmitted.
Status: current	Access: read-only
OBJECT-TYPE
	Adsl2Tssi

hwAdslnniStatisticsTable		1.3.6.1.4.1.2011.6.143.1.2.1
The table hwAdslnniStatisticsTable contains statistics of the Adsl NNI. The index of this table is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwAdslnniStatisticsEntry

hwAdslnniStatisticsEntry		1.3.6.1.4.1.2011.6.143.1.2.1.1
The table hwAdslnniStatisticsTable contains statistics of the Adsl NNI. The index of this entry is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwAdslnniStatisticsEntry

hwAdslnniRxFrameCount		1.3.6.1.4.1.2011.6.143.1.2.1.1.1
The ADSLNNI port receive OK frames.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslnniRxBytesCount		1.3.6.1.4.1.2011.6.143.1.2.1.1.2
The ADSLNNI port receive OK bytes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslnniTxFrameCount		1.3.6.1.4.1.2011.6.143.1.2.1.1.3
The ADSLNNI port transmit OK frames.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslnniTxBytesCount		1.3.6.1.4.1.2011.6.143.1.2.1.1.4
The ADSLNNI port transmit OK bytes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslnniStatisticsClear		1.3.6.1.4.1.2011.6.143.1.2.1.1.5
Clear the statistics of ADSL NNI, Options: 1. resetStat(1) -clear the statistics
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	resetStat(1)

hwAdslnniPMLineCurrTable		1.3.6.1.4.1.2011.6.143.1.3.1.1
The table hwAdslnniPMLineCurrTable contains current Performance Monitoring results of ADSL2 lines. The indexes of this table are ifIndex and hwadslnniPMLCurrUnit.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwAdslnniPMLineCurrEntry

hwAdslnniPMLineCurrEntry		1.3.6.1.4.1.2011.6.143.1.3.1.1.1
The table hwAdslnniPMLineCurrTable contains current Performance Monitoring results of ADSL2 lines. The indexes of this entry are ifIndex and hwadslnniPMLCurrUnit.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwAdslnniPMLineCurrEntry

hwadslnniPMLCurrUnit		1.3.6.1.4.1.2011.6.143.1.3.1.1.1.1
The termination unit atuc(1) or atur(2).
Status: current	Access: not-accessible
OBJECT-TYPE
	Adsl2Unit

hwadslnniPMLCurrValidIntervals		1.3.6.1.4.1.2011.6.143.1.3.1.1.1.2
Valid intervals.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwadslnniPMLCurrInvalidIntervals		1.3.6.1.4.1.2011.6.143.1.3.1.1.1.3
Invalid intervals.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwadslnniPMLCurr15MTimeElapsed		1.3.6.1.4.1.2011.6.143.1.3.1.1.1.4
Total elapsed seconds since this PM interval began. Note that the PM counters are not reset even when the XTU is reinitialized. They are reinitialized only when the agent itself is reset or reinitialized.
Status: current	Access: read-only
OBJECT-TYPE
	HCPerfTimeElapsed

hwadslnniPMLCurr15MFecs		1.3.6.1.4.1.2011.6.143.1.3.1.1.1.5
Count of seconds during this interval where there was at least one FEC correction event for one or more bearer channels in this line. This parameter is inhibited during UAS or SES.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwadslnniPMLCurr15MEs		1.3.6.1.4.1.2011.6.143.1.3.1.1.1.6
Count of seconds during this interval where there was: ATU-C: CRC-8 >= 1 for one or more bearer channels OR LOS >= 1 OR SEF >=1 OR LPR >= 1 ATU-R: FEBE >= 1 for one or more bearer channels OR LOS-FE >=1 OR RDI >=1 OR LPR-FE >=1 . This parameter is inhibited during UAS.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwadslnniPMLCurr15MSes		1.3.6.1.4.1.2011.6.143.1.3.1.1.1.7
Count of seconds during this interval where there was: ATU-C: (CRC-8 summed over all bearer channels) >= 18 OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 ATU-R: (FEBE summed over all bearer channels) >= 18 OR LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1 . This parameter is inhibited during UAS.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwadslnniPMLCurr15MLoss		1.3.6.1.4.1.2011.6.143.1.3.1.1.1.8
Count of seconds during this interval where there was LOS (or LOS-FE for ATU-R).
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwadslnniPMLCurr15MUas		1.3.6.1.4.1.2011.6.143.1.3.1.1.1.9
Count of seconds in Unavailability State during this interval. Unavailability begins at the onset of 10 contiguous severely-errored seconds, and ends at the onset of 10 contiguous seconds with no severely-errored seconds.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslnniPMLineCurrInitTable		1.3.6.1.4.1.2011.6.143.1.3.1.2
The table hwAdslnniPMLineCurrInitTable contains current initialization counters of the ADSL2 line. The index of this table consists of an interface index, where the interface has an ifType of adslnni, and a termination unit. The index of this table is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwAdslnniPMLineCurrInitEntry

hwAdslnniPMLineCurrInitEntry		1.3.6.1.4.1.2011.6.143.1.3.1.2.1
The table hwAdslnniPMLineCurrInitTable contains current initialization counters of the ADSL2 line. The index of this table consists of an interface index, where the interface has an ifType of adslnni, and a termination unit. The index of this entry is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwAdslnniPMLineCurrInitEntry

hwAdslnniPMLCurrInit15MTimeElapsed		1.3.6.1.4.1.2011.6.143.1.3.1.2.1.1
Total elapsed seconds since this PM interval began. Note that the PM counters are not reset even when the XTU is reinitialized. They are reinitialized only when the agent itself is reset or reinitialized.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwAdslnniPMLCurrInit15MFullInits		1.3.6.1.4.1.2011.6.143.1.3.1.2.1.2
Count of full initializations attempted on the line (successful and failed) during this interval.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwAdslnniPMLCurrInit15MFailedFullInits		1.3.6.1.4.1.2011.6.143.1.3.1.2.1.3
Count of failed full initializations on the line during this interval.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwAdslnniPMLCurrInit15MShortInits		1.3.6.1.4.1.2011.6.143.1.3.1.2.1.4
Count of short initializations attempted on the line (successful and failed) during this interval.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwAdslnniPMLCurrInit15MFailedShortInits		1.3.6.1.4.1.2011.6.143.1.3.1.2.1.5
Count of failed short initializations on the line during this interval.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwAdslnniPMChCurrTable		1.3.6.1.4.1.2011.6.143.1.3.2.1
The table hwadslnniPMChCurrTable contains current Performance Monitoring results of the ADSL2 channel. The indexes of this table are ifIndex and hwadslnniPMChCurrUnit.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwAdslnniPMChCurrEntry

hwAdslnniPMChCurrEntry		1.3.6.1.4.1.2011.6.143.1.3.2.1.1
The table hwadslnniPMChCurrTable contains current Performance Monitoring results of the ADSL2 channel. The indexes of this entry are ifIndex and hwadslnniPMChCurrUnit.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwAdslnniPMChCurrEntry

hwadslnniPMChCurrUnit		1.3.6.1.4.1.2011.6.143.1.3.2.1.1.1
The termination unit.
Status: current	Access: not-accessible
OBJECT-TYPE
	Adsl2Unit

hwadslnniPMChCurrValidIntervals		1.3.6.1.4.1.2011.6.143.1.3.2.1.1.2
Valid intervals.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwadslnniPMChCurrInvalidIntervals		1.3.6.1.4.1.2011.6.143.1.3.2.1.1.3
Invalid intervals.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwadslnniPMChCurr15MTimeElapsed		1.3.6.1.4.1.2011.6.143.1.3.2.1.1.4
Total elapsed seconds since this PM interval began. Note that the PM counters are not reset even when the XTU is reinitialized. They are reinitialized only when the agent itself is reset or reinitialized.
Status: current	Access: read-only
OBJECT-TYPE
	HCPerfTimeElapsed

hwadslnniPMChCurr15MCodingViolations		1.3.6.1.4.1.2011.6.143.1.3.2.1.1.5
Count of CRC-8 (FEBE for ATU-R) anomalies occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If the CRC is applied over multiple channels, then each related CRC-8 (or FEBE) anomaly should increment each of the counters related to the individual channels.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwadslnniPMChCurr15MCorrectedBlocks		1.3.6.1.4.1.2011.6.143.1.3.2.1.1.6
Count of FEC (FFEC for ATU-R) anomalies (corrected code words) occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If the FEC is applied over multiple channels, then each related FEC (or FFEC) anomaly should increment each of the counters related to the individual channels.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32