HUAWEI-8021x-EXT-MIB

File: HUAWEI-8021x-EXT-MIB.mib (54296 bytes)

Imported modules

HUAWEI-MIB	IEEE8021-PAE-MIB	SNMPv2-SMI
SNMPv2-TC

Imported symbols

huaweiMgmt	dot1xPaePortNumber	Unsigned32
Integer32	OBJECT-TYPE	MODULE-IDENTITY
DisplayString	RowStatus	MacAddress

Defined Types

Hwdot1xAuthConfigExtEntry
SEQUENCE
	hwdot1xpaeportAuthAdminStatus	INTEGER
	hwdot1xpaeportControlledType	INTEGER
	hwdot1xpaeportMaxUserNum	Integer32
	hwdot1xpaeportUserNumNow	Integer32
	hwdot1xpaeportClearStatistics	INTEGER
	hwDot1xAuthHandshakeSwitch	INTEGER
	hwDot1xAuthHandshakeCount	Integer32
	hwDot1xAuthHandshakeInterval	Integer32
	hwDot1xAuthIfEAPEnd	INTEGER

HwDot1xTemplateConfigEntry
SEQUENCE
	hwDot1xTemplateIndex	Integer32
	hwDot1xHandshakeSwitch	INTEGER
	hwDot1xHandshakeCount	Integer32
	hwDot1xHandshakeInterval	Integer32
	hwDot1xIfEAPEnd	INTEGER
	hwDot1xTempIfUsed	INTEGER
	hwDot1xTempRowStatus	RowStatus

HwDot1xPortConfigExtEntry
SEQUENCE
	hwDot1xPortControlType	INTEGER
	hwDot1xPortBindFlag	INTEGER
	hwDot1xPortAuthMode	INTEGER
	hwDot1xPortAuthState	INTEGER
	hwDot1xPortUserName	OCTET STRING
	hwDot1xPortFramePool	DisplayString
	hwDot1xPortRowStatus	RowStatus
	hwDot1xPortMacControl	INTEGER

HwDot1xPortAuthStatsExtEntry
SEQUENCE
	hwDot1xAuthSuccessTimes	Integer32
	hwDot1xAuthFailureTimes	Integer32
	hwDot1xEapolFailurePacketsTx	Integer32
	hwDot1xEapolSuccessPacketsTx	Integer32
	hwDot1xNoSupportPacketsRx	Integer32
	hwDot1xPortClearStatistics	INTEGER

HwDot1xMacPortInfoEntry
SEQUENCE
	hwDot1xMacPortInfoMacAddress	MacAddress
	hwDot1xMacPortInfoAuthState	Unsigned32
	hwDot1xMacPortInfoAuthType	Unsigned32

HwDot1xMacPortStatEntry
SEQUENCE
	hwDot1xMacPortStatAuthSuccessTimes	Unsigned32
	hwDot1xMacPortStatAuthFailureTimes	Unsigned32
	hwDot1xMacPortStatEapolFailurePacketsTx	Unsigned32
	hwDot1xMacPortStatEapolSuccessPacketsTx	Unsigned32
	hwDot1xMacPortStatNoSupportPacketsRx	Unsigned32
	hwDot1xMacPortStatClearStatistics	INTEGER
	hwDot1xMacPortStatAuthEapolFramesRx	Unsigned32
	hwDot1xMacPortStatAuthEapolFramesTx	Unsigned32
	hwDot1xMacPortStatAuthEapolStartFramesRx	Unsigned32
	hwDot1xMacPortStatAuthEapolLogoffFramesRx	Unsigned32
	hwDot1xMacPortStatAuthEapolRespIdFramesRx	Unsigned32
	hwDot1xMacPortStatAuthEapolRespFramesRx	Unsigned32
	hwDot1xMacPortStatAuthEapolReqIdFramesTx	Unsigned32
	hwDot1xMacPortStatAuthEapolReqFramesTx	Unsigned32
	hwDot1xMacPortStatAuthInvalidEapolFramesRx	Unsigned32
	hwDot1xMacPortStatAuthEapLengthErrorFramesRx	Unsigned32
	hwDot1xMacPortStatAuthLastEapolFrameVersion	Unsigned32
	hwDot1xMacPortStatAuthEapolKeyFramesRx	Unsigned32
	hwDot1xMacPortStatAuthEapolKeyFramesTx	Unsigned32
	hwDot1xMacPortStatAuthEapolPeapFramesRx	Unsigned32
	hwDot1xMacPortStatAuthEapolPeapFramesTx	Unsigned32

Defined Values

hwPae8021xExt		1.3.6.1.4.1.2011.5.22
The MIB module defines the IEEE802.1x protocol MIB objects. IEEE802.1x protocol is mainly used to control the link layer access and identity verification for wireless users.
MODULE-IDENTITY

hwpaeExtMibObjects		1.3.6.1.4.1.2011.5.22.1
OBJECT IDENTIFIER

hwdot1xPaeSystem		1.3.6.1.4.1.2011.5.22.1.1
OBJECT IDENTIFIER

hwdot1xAuthQuietPeriod		1.3.6.1.4.1.2011.5.22.1.1.1
Silence period of the system, preventing malicious attack. By default, it is 60 seconds. DEFVAL { 60 }
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

hwdot1xAuthTxPeriod		1.3.6.1.4.1.2011.5.22.1.1.2
Interval period of sending EAP_Request/Id packet. By default,30 seconds.DEFVAL { 30 }
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

hwdot1xAuthSuppTimeout		1.3.6.1.4.1.2011.5.22.1.1.3
Interval period of waiting for the supplicant to response to EAPoL packet.DEFVAL { 30 }
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

hwdot1xAuthServerTimeout		1.3.6.1.4.1.2011.5.22.1.1.4
Configure the period of waiting for the response of Server. By default, it is 30 seconds.DEFVAL { 30 }
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

hwdot1xAuthMaxReq		1.3.6.1.4.1.2011.5.22.1.1.5
Maximum times of authentication.DEFVAL { 2 }
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

hwdot1xAuthReAuthPeriod		1.3.6.1.4.1.2011.5.22.1.1.6
Configure the reauthentication period. By default, it is 3600 seconds.DEFVAL { 3600 }.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

hwdot1xPaeAuthenticator		1.3.6.1.4.1.2011.5.22.1.2
OBJECT IDENTIFIER

hwdot1xAuthConfigExtTable		1.3.6.1.4.1.2011.5.22.1.2.1
It is an extension of the public MIB table dot1xAuthConfigTable, with certain leaves added for describing the configuration of the object of the port authenticator. The index of this table is dot1xPaePortNumber.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hwdot1xAuthConfigExtEntry

hwdot1xAuthConfigExtEntry		1.3.6.1.4.1.2011.5.22.1.2.1.1
It is an extension of the public MIB table dot1xAuthConfigTable, with certain leaves added for describing the configuration of the object of the port authenticator. The index of this entry is dot1xPaePortNumber.
Status: current	Access: not-accessible
OBJECT-TYPE
	Hwdot1xAuthConfigExtEntry

hwdot1xpaeportAuthAdminStatus		1.3.6.1.4.1.2011.5.22.1.2.1.1.1
Indicates he switch of port protocol, enabling or disenabling port 8021X. Options: 1. enabled(1) -indicates port 8021X is enabled 2. disabled(2) -indicates port 8021X is disabled
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

hwdot1xpaeportControlledType		1.3.6.1.4.1.2011.5.22.1.2.1.1.2
Port Access Control type, base port access control or base MAC access control. Options: 1. port(1) -base port access control 2. mac(2) -base MAC access control
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	port(1), mac(2)

hwdot1xpaeportMaxUserNum		1.3.6.1.4.1.2011.5.22.1.2.1.1.3
Indicates the maximum number of online users in a port.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hwdot1xpaeportUserNumNow		1.3.6.1.4.1.2011.5.22.1.2.1.1.4
Indicates the number of online users in a port now.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hwdot1xpaeportClearStatistics		1.3.6.1.4.1.2011.5.22.1.2.1.1.5
Indicates clear various Statistics viz. Options: 1. clear(1) -indicates clearing various statistics viz
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	clear(1)

hwDot1xAuthHandshakeSwitch		1.3.6.1.4.1.2011.5.22.1.2.1.1.6
Indicates the status of the handshake function. Options: 1. open(1) -indicates the handshake function is enabled 2. close(0) -indicates the handshake function is disabled Default: close(0)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	open(1), close(0)

hwDot1xAuthHandshakeCount		1.3.6.1.4.1.2011.5.22.1.2.1.1.7
Indicates the permitted handshake failures. Range: 0-10 The value 0 is meaningless in current version. Default: 3
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..10

hwDot1xAuthHandshakeInterval		1.3.6.1.4.1.2011.5.22.1.2.1.1.8
Indicates the handshake interval. Unit: second Range: 1-1800 Default: 15s
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..1800

hwDot1xAuthIfEAPEnd		1.3.6.1.4.1.2011.5.22.1.2.1.1.9
Indicates which EAP authentication mode is adopted for port or virtual port. In the 802.1x function, the authentication packet can be processed in two modes: EAP end and EAP relay. Options: 1. eapEnd(1) -indicates the EAP authentication mode is eapEnd 2. eapRelay(2) -indicates the EAP authentication mode is eapRelay Default: eapReplay(2)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	eapEnd(1), eapRelay(2)

hwDot1xMibObjects		1.3.6.1.4.1.2011.5.22.1.3
OBJECT IDENTIFIER

hwDHCPTripperStatus		1.3.6.1.4.1.2011.5.22.1.3.1
The device processes the DHCP DISCOVER and DHCP REQUEST packets only after the DHCP-trigger authentication function is enabled. Otherwise, the device does not process the DHCP DISCOVER or DHCP REQUEST packet. After the DHCP-trigger authentication function is enabled, the device triggers the authentication when receiving the DHCP DISCOVER and DHCP REQUEST packets. Indicates the status of the DHCP-trigger authentication function of the device. Options: 1. enabled(1) -indicates the DHCP-trigger authentication function is enabled 2. disabled(2) -indicates the DHCP-trigger authentication function is disabled Default: disable(2)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

hwDot1xTemplateConfigTable		1.3.6.1.4.1.2011.5.22.1.3.2
It is used to configure the profile used to control the user authentication through 802.1x. Profile 1 exists permanently, and it cannot be created or deleted. Other profiles can be created or deleted. The index of this table is hwDot1xTemplateIndex. This table supports only the profile mode. To create a profile, set hwDot1xTempRowStatus to createAndGo(4). The index is the ID of the profile to be created. To delete a profile, set hwDot1xTempRowStatus to destroy(6). The index is the ID of the profile to be deleted.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwDot1xTemplateConfigEntry

hwDot1xTemplateConfigEntry		1.3.6.1.4.1.2011.5.22.1.3.2.1
It is used to configure the profile used to control the user authentication through 802.1x. Profile 1 exists permanently, and it cannot be created or deleted. Other profiles can be created or deleted. The index of this entry is hwDot1xTemplateIndex. This table supports only the profile mode. To create a profile, set hwDot1xTempRowStatus to createAndGo(4). The index is the ID of the profile to be created. To delete a profile, set hwDot1xTempRowStatus to destroy(6). The index is the ID of the profile to be deleted.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwDot1xTemplateConfigEntry

hwDot1xTemplateIndex		1.3.6.1.4.1.2011.5.22.1.3.2.1.1
Indicates the profile ID. Range: 1-256
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..256

hwDot1xHandshakeSwitch		1.3.6.1.4.1.2011.5.22.1.3.2.1.2
Indicates the status of the handshake function. Options: 1. open(1) -indicates the handshake function is enabled 2. close(0) -indicates the handshake function is disabled Default: close(0)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	open(1), close(0)

hwDot1xHandshakeCount		1.3.6.1.4.1.2011.5.22.1.3.2.1.3
Indicates the permitted handshake failures. Range: 0-10 Default: 0
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..10

hwDot1xHandshakeInterval		1.3.6.1.4.1.2011.5.22.1.3.2.1.4
Indicates the handshake interval. Unit: second Range: 1-1800 Default: 15s
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..1800

hwDot1xIfEAPEnd		1.3.6.1.4.1.2011.5.22.1.3.2.1.5
Indicates which EAP authentication mode is adopted for the specified 802.1x profile. In the 802.1x function, the authentication packet can be processed in two modes: EAP end and EAP relay. Options: 1. eapEnd(1) -indicates the EAP end authentication mode. If local user authenticates on DSLAM directly, it does not need to communicate with the remote RADIUS server. If the user is not local user, it must be authenticated on the remote RADIUS server. 2. eapRelay(2) -the user must be authenticated on the remote RADIUS server Default: eapReplay(2)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	eapEnd(1), eapRelay(2)

hwDot1xTempIfUsed		1.3.6.1.4.1.2011.5.22.1.3.2.1.6
Indicates whether the profile is used. When a profile is not used, the profile can be deleted. Options: 1. used(1) -indicates the profile is used 2. unused(0) -indicates the profile is not used Default: unused(0)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	used(1), unused(0)

hwDot1xTempRowStatus		1.3.6.1.4.1.2011.5.22.1.3.2.1.7
Indicates the operation type of the table. Options: 1. active(1) -indicates query operation 2. createAndGo(4) -indicates creating a profile 3. destroy(6) -indicates deleting a profile
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hwDot1xPortConfigExtTable		1.3.6.1.4.1.2011.5.22.1.3.3
It is an extension table of dot1xPaePortTable and is used for describing the authorization mode and authentication status of the port. The index of this table is dot1xPaePortNumber (defined in dot1xPaePortTable). This version supports authentication based on the port or service port; therefore, dot1xPaePortNumber indicates the ID of a port or service port. When the input value exceeds the maximum ID of the service port, dot1xPaePortNumber is treated as ifIndex. The range of the service port IDs depends on the version. This table supports the creation of the port table. After the port table is created, the 802.1x authentication is bound to the port. The create operation is as follows: Specify the ID of the port to which the 802.1x authentication needs to be bound. Set hwDot1xPortRowStatus to createAndGo(4), and issue the set operation. Optionally specify hwDot1xPortMacControl. However, if the ID of the port is the ID of the service port, hwDot1xPortMacControl cannot be specified. hwDot1xPortMacControl cannot be issued independently, and it must be issued together with hwDot1xPortRowStatus during the create operation.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwDot1xPortConfigExtEntry

hwDot1xPortConfigExtEntry		1.3.6.1.4.1.2011.5.22.1.3.3.1
It is an extension table of dot1xPaePortTable and is used for describing the authorization mode and authentication status of the port. The index of this entry is dot1xPaePortNumber (defined in dot1xPaePortTable). This version supports authentication based on the port or service port; therefore, dot1xPaePortNumber indicates the ID of a port or service port. When the input value exceeds the maximum ID of the service port, dot1xPaePortNumber is treated as ifIndex. The range of the service port IDs depends on the version. This table supports the creation of the port table. After the port table is created, the 802.1x authentication is bound to the port. The create operation is as follows: Specify the ID of the port to which the 802.1x authentication needs to be bound. Set hwDot1xPortRowStatus to createAndGo(4), and issue the set operation. Optionally specify hwDot1xPortMacControl. However, if the ID of the port is the ID of the service port, hwDot1xPortMacControl cannot be specified. hwDot1xPortMacControl cannot be issued independently, and it must be issued together with hwDot1xPortRowStatus during the create operation.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwDot1xPortConfigExtEntry

hwDot1xPortControlType		1.3.6.1.4.1.2011.5.22.1.3.3.1.1
Indicates the control type of the port. The port can be controlled in the following two ways: physical port control and service port control. Options: 1. physicalPort(1) -physical port control 2. servicePort(2) -service port control
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	physicalPort(1), servicePort(2)

hwDot1xPortBindFlag		1.3.6.1.4.1.2011.5.22.1.3.3.1.2
Indicates that the 802.1x authentication is bound to the port. Options: 1. binding(1) -indicates the 802.1x authentication is bound to the port
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	binding(1)

hwDot1xPortAuthMode		1.3.6.1.4.1.2011.5.22.1.3.3.1.3
Indicates the control parameters of the controlled port. A port has three authorization control modes: force-authorized mode, force-unauthorized mode, and auto mode. According to different networks, different port control modes can be selected. By default, a port is in the unauthorized state, and users connected to the port cannot access network resources. If the authentication passes, the port state switches to the authorized state and users can access the network resources. Options: 1. forceUnauthorized(1) -indicates force-authorized mode 2. auto(2) -auto mode 3. forceAuthorized(3) -indicates force-unauthorized mode Default: auto(2)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	forceUnauthorized(1), auto(2), forceAuthorized(3)

hwDot1xPortAuthState		1.3.6.1.4.1.2011.5.22.1.3.3.1.4
Indicates the port authentication status. Options: 1. auth(1) -indicates the port is authenticated 2. unAuth(2) -indicates the port is not authenticated Default: unauth(2)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	auth(1), unAuth(2)

hwDot1xPortUserName		1.3.6.1.4.1.2011.5.22.1.3.3.1.5
Indicates the user name bound to the port.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..64)

hwDot1xPortFramePool		1.3.6.1.4.1.2011.5.22.1.3.3.1.6
Indicates the address pool of the port binding.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hwDot1xPortRowStatus		1.3.6.1.4.1.2011.5.22.1.3.3.1.7
Indicates the operation type of the port table: binding the port to the 802.1x authentication, and unbinding the port from the 802.1x authentication. Options: 1. active(1) -indicates query operation 2. createAndGo(4) -indicates binding a port to the 802.1x authentication 3. destroy(6) -indicates unbinding a port from the 802.1x authentication
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hwDot1xPortMacControl		1.3.6.1.4.1.2011.5.22.1.3.3.1.8
Indicates whether to enable the MAC-based control function. This leaf can be issued with parameters during the create operation. This function supports port-based rather than service-port-based configuration. When hwDot1xPortMacControl is set to enable(1), only the packets whose source MAC address is the MAC address of the authorized user can reach the network side. This leaf does not support the modify operation. Options: 1. enable(1) -indicates the MAC-based control function is enabled 2. disable(2) -indicates the MAC-based control function is disabled Default: disable(2)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwDot1xPortAuthStatsExtTable		1.3.6.1.4.1.2011.5.22.1.3.4
It is an extension of the public MIB table dot1xAuthStatsEntry, with certain leaves added for describing the packet statistics of the port. The index of this table is dot1xPaePortNumber (defined in dot1xPaePortTable). The following tables list the leaves of this table. Only hwDot1xPortClearStatistics in this table supports the modify operation. The modification process is as follows: Specify the ID of the port to be modified. Set hwDot1xPortClearStatistics to the required value. The option is clear(1). Therefore, directly perform the set operation.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwDot1xPortAuthStatsExtEntry

hwDot1xPortAuthStatsExtEntry		1.3.6.1.4.1.2011.5.22.1.3.4.1
It is an extension of the public MIB table dot1xAuthStatsEntry, with certain leaves added for describing the packet statistics of the port. The index of this entry is dot1xPaePortNumber (defined in dot1xPaePortTable). The following tables list the leaves of this table. Only hwDot1xPortClearStatistics in this table supports the modify operation. The modification process is as follows: Specify the ID of the port to be modified. Set hwDot1xPortClearStatistics to the required value. The option is clear(1). Therefore, directly perform the set operation.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwDot1xPortAuthStatsExtEntry

hwDot1xAuthSuccessTimes		1.3.6.1.4.1.2011.5.22.1.3.4.1.1
Indicates the number of authentication successes.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwDot1xAuthFailureTimes		1.3.6.1.4.1.2011.5.22.1.3.4.1.2
Indicates the number of authentication failures.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwDot1xEapolFailurePacketsTx		1.3.6.1.4.1.2011.5.22.1.3.4.1.3
Indicates the number of the transmitted Eapol-Failure packets.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwDot1xEapolSuccessPacketsTx		1.3.6.1.4.1.2011.5.22.1.3.4.1.4
Indicates the number of the transmitted Eapol-Success packets.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwDot1xNoSupportPacketsRx		1.3.6.1.4.1.2011.5.22.1.3.4.1.5
Indicates the number of the unsupported EAPoL packets that are received.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwDot1xPortClearStatistics		1.3.6.1.4.1.2011.5.22.1.3.4.1.6
Clears the port statistics. Options: 1. clear(1) -indicates clearing the port statistics
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	clear(1)

hwDot1xAutoDetect		1.3.6.1.4.1.2011.5.22.1.3.5
Indicates the status of the auto-detect function of the device. After the 802.1x auto-detect function is enabled, the system automatically detects the port status and requests the user authentication. Options: 1. enabled(1) -indicates the auto-detect function of the device is enabled 2. disabled(2) -indicates the auto-detect function of the device is disabled Default: disable(2)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

hwDot1xIntermittentBlinkingProtection		1.3.6.1.4.1.2011.5.22.1.3.6
Indicates the intermittent blinking protection function, which is used to reduce the duration of service interruption caused by port intermittent blinking. After the intermittent blinking protection function is enabled, the system does not force the 802.1x user to go offline when the port is down. In this case, if the handshake function is already enabled, the system detects the user by using the handshake mechanism; if the handshake function is disabled, the system waits for the duration of keepalive interval x number of handshake failures, and then forces the user to go offline if the port is still down. After the intermittent blinking protection function is enabled, the count of user online duration may be incorrect. Therefore, this function is applicable to the provisioning of services with the monthly flat rate rather than in the duration-based charging mode. Indicates the status of the intermittent blinking protection function of the device. Options: 1. enabled(1) -indicates the intermittent blinking protection function is enabled 2. disabled(2) -indicates the intermittent blinking protection function is disabled Default: disable(2)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

hwDot1xGlobalMacControlStatus		1.3.6.1.4.1.2011.5.22.1.3.7
Whether the global mac control is enabled in the device. Enable indicate that global mac control enable in the device; Disabled indicate that global mac control disable in the device. DEFVAL { 2 } Options: 1. enabled(1) -indicates the global mac control is enabled 2. disabled(2) -indicates the global mac control is disabled
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

hwDot1xMacPortInfoTable		1.3.6.1.4.1.2011.5.22.1.3.8
This table describes the port information of 802.1x, The index of this table is mac address.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwDot1xMacPortInfoEntry

hwDot1xMacPortInfoEntry		1.3.6.1.4.1.2011.5.22.1.3.8.1
This table describes the port information of 802.1x, The index of this entry is mac address.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwDot1xMacPortInfoEntry

hwDot1xMacPortInfoMacAddress		1.3.6.1.4.1.2011.5.22.1.3.8.1.1
Mac address.
Status: current	Access: not-accessible
OBJECT-TYPE
	MacAddress

hwDot1xMacPortInfoAuthState		1.3.6.1.4.1.2011.5.22.1.3.8.1.2
Authentication state.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwDot1xMacPortInfoAuthType		1.3.6.1.4.1.2011.5.22.1.3.8.1.3
Authentication Type.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwDot1xMacPortStatTable		1.3.6.1.4.1.2011.5.22.1.3.9
This table describes the port statistics of 802.1x, The index of this table is mac address.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwDot1xMacPortStatEntry

hwDot1xMacPortStatEntry		1.3.6.1.4.1.2011.5.22.1.3.9.1
This table describes the port statistics of 802.1x, The index of this entry is mac address.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwDot1xMacPortStatEntry

hwDot1xMacPortStatAuthSuccessTimes		1.3.6.1.4.1.2011.5.22.1.3.9.1.1
Authentication success times
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwDot1xMacPortStatAuthFailureTimes		1.3.6.1.4.1.2011.5.22.1.3.9.1.2
Authentication Failure times
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwDot1xMacPortStatEapolFailurePacketsTx		1.3.6.1.4.1.2011.5.22.1.3.9.1.3
The numbers of the Eapol-Failure Packets which has been send by the port
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwDot1xMacPortStatEapolSuccessPacketsTx		1.3.6.1.4.1.2011.5.22.1.3.9.1.4
The numbers of the Eapol-Success Packets which has been send by the port
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwDot1xMacPortStatNoSupportPacketsRx		1.3.6.1.4.1.2011.5.22.1.3.9.1.5
The numbers of the Eapol packets which are not supported have been received in this port
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwDot1xMacPortStatClearStatistics		1.3.6.1.4.1.2011.5.22.1.3.9.1.6
Clear the information of the packets statistics in this port Options: 1. clear(1) -indicates clearing the information of the packets statistics in this port
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	clear(1)

hwDot1xMacPortStatAuthEapolFramesRx		1.3.6.1.4.1.2011.5.22.1.3.9.1.7
The number of valid EAPOL frames of any type that has been received by this Authenticator.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwDot1xMacPortStatAuthEapolFramesTx		1.3.6.1.4.1.2011.5.22.1.3.9.1.8
The number of EAPOL frames of any type that has been transmitted by this Authenticator.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwDot1xMacPortStatAuthEapolStartFramesRx		1.3.6.1.4.1.2011.5.22.1.3.9.1.9
The number of EAPOL Start frames that have been received by this Authenticator.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwDot1xMacPortStatAuthEapolLogoffFramesRx		1.3.6.1.4.1.2011.5.22.1.3.9.1.10
The number of EAPOL Logoff frames that have been received by this Authenticator.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwDot1xMacPortStatAuthEapolRespIdFramesRx		1.3.6.1.4.1.2011.5.22.1.3.9.1.11
The number of EAP Resp/Id frames that have been received by this Authenticator.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwDot1xMacPortStatAuthEapolRespFramesRx		1.3.6.1.4.1.2011.5.22.1.3.9.1.12
The number of valid EAP Response frames (other than Resp/Id frames) that have been received by this Authenticator.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwDot1xMacPortStatAuthEapolReqIdFramesTx		1.3.6.1.4.1.2011.5.22.1.3.9.1.13
The number of EAP Req/Id frames that have been transmitted by this Authenticator.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwDot1xMacPortStatAuthEapolReqFramesTx		1.3.6.1.4.1.2011.5.22.1.3.9.1.14
The number of EAP Request frames (other than Rq/Id frames) that have been transmitted by this Authenticator.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwDot1xMacPortStatAuthInvalidEapolFramesRx		1.3.6.1.4.1.2011.5.22.1.3.9.1.15
The number of EAPOL frames that have been received by this Authenticator in which the frame type is not recognized.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwDot1xMacPortStatAuthEapLengthErrorFramesRx		1.3.6.1.4.1.2011.5.22.1.3.9.1.16
The number of EAPOL frames that have been received by this Authenticator in which the Packet Body Length field is invalid.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwDot1xMacPortStatAuthLastEapolFrameVersion		1.3.6.1.4.1.2011.5.22.1.3.9.1.17
The protocol version number carried in the most recently received EAPOL frame.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwDot1xMacPortStatAuthEapolKeyFramesRx		1.3.6.1.4.1.2011.5.22.1.3.9.1.18
The number of EAPOL key frames that have been received by this Authenticator.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwDot1xMacPortStatAuthEapolKeyFramesTx		1.3.6.1.4.1.2011.5.22.1.3.9.1.19
The number of EAPOL key frames that have been sent by this Authenticator.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwDot1xMacPortStatAuthEapolPeapFramesRx		1.3.6.1.4.1.2011.5.22.1.3.9.1.20
The number of EAPOL peap frames that have been received by this Authenticator.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwDot1xMacPortStatAuthEapolPeapFramesTx		1.3.6.1.4.1.2011.5.22.1.3.9.1.21
The number of EAPOL peap frames that have been sent by this Authenticator.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwDot1xMacConflictDetectStatus		1.3.6.1.4.1.2011.5.22.1.3.10
Indicates the status of the mac-conflict-detect function of the device. After the 802.1x mac-conflict-detect function is enabled, the system detects the mac conflicts. Options: 1. enabled(1) -indicates the mac-conflict-detect of the device is enabled 2. disabled(2) -indicates the mac-conflict-detect of the device is disabled Default: disable(2)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)