HPN-ICF-DSP-MIB

File: HPN-ICF-DSP-MIB.mib (8969 bytes)

Imported modules

HPN-ICF-OID-MIB ENTITY-MIB SNMPv2-SMI

Imported symbols

hpnicfCommon PhysicalIndex OBJECT-TYPE
MODULE-IDENTITY NOTIFICATION-TYPE Integer32
TimeTicks

Defined Types

HpnicfVPMStatusEntry  
SEQUENCE    
  hpnicfVPMIndex Integer32
  hpnicfVPMEnPhysicalIndex PhysicalIndex
  hpnicfVPMState INTEGER
  hpnicfVPMResourceUtilization Integer32
  hpnicfVPMHiWaterUtilization Integer32
  hpnicfVPMMaxChannel Integer32

HpnicfDSPStatusEntry  
SEQUENCE    
  hpnicfDSPIndex Integer32
  hpnicfDSPVPMIndex Integer32
  hpnicfDSPEnPhysicalIndex PhysicalIndex
  hpnicfDSPResetTime TimeTicks
  hpnicfDSPMaxChannel Integer32
  hpnicfDSPState INTEGER
  hpnicfDSPInUseChannel Integer32

Defined Values

hpnicfDSP 1.3.6.1.4.1.11.2.14.11.15.2.89
This MIB is to provide the definition of the DSP(Digital Signal Processing) status.
MODULE-IDENTITY    

hpnicfVPMStatusTable 1.3.6.1.4.1.11.2.14.11.15.2.89.1
The table contains status parameters of VPM(Voice Process Module) card.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfVPMStatusEntry

hpnicfVPMStatusEntry 1.3.6.1.4.1.11.2.14.11.15.2.89.1.1
The entry of VPM status table.
OBJECT-TYPE    
  HpnicfVPMStatusEntry  

hpnicfVPMIndex 1.3.6.1.4.1.11.2.14.11.15.2.89.1.1.1
The index for this entry. The sequence of VPM card in the chassis is from the top to bottom.
OBJECT-TYPE    
  Integer32 1..64  

hpnicfVPMEnPhysicalIndex 1.3.6.1.4.1.11.2.14.11.15.2.89.1.1.2
The object corresponds to PhysicalIndex in the chassis.
OBJECT-TYPE    
  PhysicalIndex  

hpnicfVPMState 1.3.6.1.4.1.11.2.14.11.15.2.89.1.1.3
The object indicates the current state of VPM card being monitored. normal(1) - VPM card in normal condition. warning(2) - VPM card has some problem and need attention. fatal(3) - VPM card is not functional. offLine(4) - VPM card is in off-line maintenance state.
OBJECT-TYPE    
  INTEGER normal(1), warning(2), fatal(3), offLine(4)  

hpnicfVPMResourceUtilization 1.3.6.1.4.1.11.2.14.11.15.2.89.1.1.4
The object indicates the percentage of current DSP resource utilization of the VPM card. The utilization is a ratio of number of busy DSP resources (for handling calls, transcoding, voice compression,...) to the total available DSP resources.
OBJECT-TYPE    
  Integer32 0..100  

hpnicfVPMHiWaterUtilization 1.3.6.1.4.1.11.2.14.11.15.2.89.1.1.5
The object indicates the highest percentage of DSP resource utilization of the VPM card that have been occured.
OBJECT-TYPE    
  Integer32 0..100  

hpnicfVPMMaxChannel 1.3.6.1.4.1.11.2.14.11.15.2.89.1.1.6
The maximum number of channels can be supported in each VPM card.
OBJECT-TYPE    
  Integer32  

hpnicfDSPStatusTable 1.3.6.1.4.1.11.2.14.11.15.2.89.2
The table contains status parameters of DSP(Digital Signal Processing) card.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDSPStatusEntry

hpnicfDSPStatusEntry 1.3.6.1.4.1.11.2.14.11.15.2.89.2.1
The entry of DSP status table.
OBJECT-TYPE    
  HpnicfDSPStatusEntry  

hpnicfDSPIndex 1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.1
The index for this entry. DSP is fixed on VPM card or chassis card. The sequence of DSP in the VPM card or chassis card is from right to left.
OBJECT-TYPE    
  Integer32 1..256  

hpnicfDSPVPMIndex 1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.2
The object corresponds to VPMIndex in the chassis. If value of this object is non-zero, it is the index of VPM card.(DSP is in this VPM card.) If value of this object is 0, then the DSP is fixed in the chassis card.
OBJECT-TYPE    
  Integer32 0..64  

hpnicfDSPEnPhysicalIndex 1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.3
The object corresponds to PhysicalIndex in the chassis.
OBJECT-TYPE    
  PhysicalIndex  

hpnicfDSPResetTime 1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.4
The value of sysUpTime from the last DSP reset occurred.
OBJECT-TYPE    
  TimeTicks  

hpnicfDSPMaxChannel 1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.5
The maximum number of channels can be supported in each DSP. The value is chosen in an implementation-dependent manner by the DSP functionality.
OBJECT-TYPE    
  Integer32  

hpnicfDSPState 1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.6
The object indicates the current state of DSP being monitored. normal(1) - DSP in normal condition. fatal(3) - DSP is not functional. offLine(4) - DSP is in off-line maintenance state.
OBJECT-TYPE    
  INTEGER normal(1), fatal(3), offLine(4)  

hpnicfDSPInUseChannel 1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.7
The number of channels that are reserved for serving calls. The value is incremented when the DSP channel is reserved for call setup and is decremented after the DSP channel is free due to call disconnection.
OBJECT-TYPE    
  Integer32  

hpnicfDSPTrap 1.3.6.1.4.1.11.2.14.11.15.2.89.3
OBJECT IDENTIFIER    

hpnicfDSPTrapPrex 1.3.6.1.4.1.11.2.14.11.15.2.89.3.0
OBJECT IDENTIFIER    

hpnicfVPMStateChange 1.3.6.1.4.1.11.2.14.11.15.2.89.3.0.1
This trap is sent when VPM state changes.
NOTIFICATION-TYPE    

hpnicfDSPStateChange 1.3.6.1.4.1.11.2.14.11.15.2.89.3.0.2
This trap is sent when DSP state changes.
NOTIFICATION-TYPE