HP-SWITCH-ERROR-MSG-MIB

File: HP-SWITCH-ERROR-MSG-MIB.mib (7075 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
HP-ICF-OID

Imported symbols

OBJECT-TYPE MODULE-IDENTITY Integer32
DateAndTime MODULE-COMPLIANCE OBJECT-GROUP
hpSwitch

Defined Types

HpSwitchErrorMsgEntry  
SEQUENCE    
  hpSwitchErrorEntityType INTEGER
  hpSwitchErrorEntityHandle STRING
  hpSwitchErrorSnmpSeqCode Integer32
  hpSwitchErrorTime DateAndTime
  hpSwitchErrorFailedOID OBJECT IDENTIFIER
  hpSwitchEntityErrorMsg STRING
  hpSwitchSnmpErrorCode Integer32

Defined Values

hpSwitchErrorMsgMIB 1.3.6.1.4.1.11.2.14.11.5.1.68
This MIB module is for the Switch Error Messages reporting with SNMP
MODULE-IDENTITY    

hpSwitchErrorMsgObjects 1.3.6.1.4.1.11.2.14.11.5.1.68.1
OBJECT IDENTIFIER    

hpSwitchErrorMsgTable 1.3.6.1.4.1.11.2.14.11.5.1.68.1.1
This table contains the error status of the most recent SNMP operation for each of the management entities. This table contains 10 application entries with 10 error message entries for each application. This table holds maximum 100 error message entries
OBJECT-TYPE    
  SEQUENCE OF  
    HpSwitchErrorMsgEntry

hpSwitchErrorMsgEntry 1.3.6.1.4.1.11.2.14.11.5.1.68.1.1.1
An entry contains the information on the handle of the entity and the corresponding error messages indexed with the SNMP sequence code.
OBJECT-TYPE    
  HpSwitchErrorMsgEntry  

hpSwitchErrorEntityType 1.3.6.1.4.1.11.2.14.11.5.1.68.1.1.1.1
The management entity from which a SNMP request arrives. For the CLI application the value will be (2). The value will be (3) if the request is from a web application. If the management entity is a Net Management application the value will be either (4) or (5) depending on whether they are carrying an IPv4 or an IPv6 address. For the OA (Open Architecture application the value will be (6).
OBJECT-TYPE    
  INTEGER others(1), cliSession(2), webSession(3), ipV4Address(4), ipV6Address(5), oaApplication(6)  

hpSwitchErrorEntityHandle 1.3.6.1.4.1.11.2.14.11.5.1.68.1.1.1.2
The handle corresponding to the application performing the SNMP operation. The handle will denote an IP Address, if the application is a Net management application. Or it will be the session id of the CLI, WEB or the OA application
OBJECT-TYPE    
  STRING Size(0..96)  

hpSwitchErrorSnmpSeqCode 1.3.6.1.4.1.11.2.14.11.5.1.68.1.1.1.3
This denotes the SNMP sequence code sent by the requester.
OBJECT-TYPE    
  Integer32 0..2147483647  

hpSwitchErrorTime 1.3.6.1.4.1.11.2.14.11.5.1.68.1.1.1.4
This denotes the Date and Time when the SNMP set `request processing has failed.
OBJECT-TYPE    
  DateAndTime  

hpSwitchErrorFailedOID 1.3.6.1.4.1.11.2.14.11.5.1.68.1.1.1.5
This denotes the OID of the SNMP Object for which the SNMP set request processing has failed.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

hpSwitchEntityErrorMsg 1.3.6.1.4.1.11.2.14.11.5.1.68.1.1.1.6
An error message having descriptive information about the error for the failed SNMP set request.
OBJECT-TYPE    
  STRING  

hpSwitchSnmpErrorCode 1.3.6.1.4.1.11.2.14.11.5.1.68.1.1.1.7
The SNMP error code which is retuned when the SNMP set request failed.
OBJECT-TYPE    
  Integer32 0..18  

hpSwitchErrorMsgMIBConformance 1.3.6.1.4.1.11.2.14.11.5.1.68.2
OBJECT IDENTIFIER    

hpSwitchErrorMsgMIBCompliances 1.3.6.1.4.1.11.2.14.11.5.1.68.2.1
OBJECT IDENTIFIER    

hpSwitchErrorMsgMIBGroups 1.3.6.1.4.1.11.2.14.11.5.1.68.2.2
OBJECT IDENTIFIER    

hpSwitchErrorMsgMIBCompliance 1.3.6.1.4.1.11.2.14.11.5.1.68.2.1.1
The compliance statement for switch error message entities
MODULE-COMPLIANCE    

hpSwitchErrorMsgMIBGroup 1.3.6.1.4.1.11.2.14.11.5.1.68.2.2.1
A collection of objects for switch error message.
OBJECT-GROUP