HP-ICF-RELOAD-MIB

File: HP-ICF-RELOAD-MIB.mib (9223 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
ENTITY-MIB HP-ICF-BASIC

Imported symbols

Integer32 OBJECT-TYPE MODULE-IDENTITY
DateAndTime TEXTUAL-CONVENTION MODULE-COMPLIANCE
OBJECT-GROUP entPhysicalIndex hpicfBasic

Defined Types

ReloadControl  
TEXTUAL-CONVENTION    
  current INTEGER reloadSlotNone(1), fullPowerCycleReload(2)

HpicfReloadEntry  
SEQUENCE    
  hpicfReloadControl ReloadControl
  hpicfReloadDateTime DateAndTime

Defined Values

hpicfReloadMIB 1.3.6.1.4.1.11.2.14.11.1.4.20
This MIB module describes objects for basic management of reloading devices in the HP Integrated Communication Facility product line.
MODULE-IDENTITY    

hpicfReloadObjects 1.3.6.1.4.1.11.2.14.11.1.4.20.1
OBJECT IDENTIFIER    

hpicfEntityReload 1.3.6.1.4.1.11.2.14.11.1.4.20.2
OBJECT IDENTIFIER    

hpicfReloadConformance 1.3.6.1.4.1.11.2.14.11.1.4.20.3
OBJECT IDENTIFIER    

hpicfReloadState 1.3.6.1.4.1.11.2.14.11.1.4.20.1.1
This object specifies the state of the device. If it is in: (1) 'no reload' was scheduled (2) 'reload after' was scheduled (3) 'reload at' was scheduled To cancel the scheduled reload, this object needs to be set with (1). NOTE: This object cannot be set with (2) or (3).When hpicfReloadAfter or hpicfReloadAt is scheduled the state of hpicfReloadState is automatically changed to (2) or (3) respectively.
OBJECT-TYPE    
  INTEGER notScheduled(1), reloadAfter(2), reloadAt(3)  

hpicfReloadAfter 1.3.6.1.4.1.11.2.14.11.1.4.20.1.2
The object specifies the time in seconds after which reload will occur.If no reload is scheduled it returns -1. To schedule a reload/reboot, time in seconds is entered and 0 for immediate reload. When hpicfReloadAfter is scheduled the state of hpicfReloadState is changed to reloadAfter automatically. NOTE: If hpicfReloadAt or hpicfReloadAfter is already scheduled, it will automatically be cancelled and the new hpicfReloadAfter is scheduled.
OBJECT-TYPE    
  Integer32  

hpicfReloadAt 1.3.6.1.4.1.11.2.14.11.1.4.20.1.3
The object specifies the time and date at which reload will occur. To schedule a reload in the future, the time and date at which reload needs to occur should be given. When hpicfReloadAt is scheduled it will change the state of hpicfReloadState to reloadAt. NOTE: If hpicfReloadAt or hpicfReloadAfter is already scheduled, it will automatically be cancelled and the new hpicfReloadAt is scheduled.
OBJECT-TYPE    
  DateAndTime  

hpicfReloadTable 1.3.6.1.4.1.11.2.14.11.1.4.20.2.2
This table contains a row for different entities and shows the control operation and the latest reload time for that entity.
OBJECT-TYPE    
  SEQUENCE OF  
    HpicfReloadEntry

hpicfReloadEntry 1.3.6.1.4.1.11.2.14.11.1.4.20.2.2.1
Information about Reload table.
OBJECT-TYPE    
  HpicfReloadEntry  

hpicfReloadControl 1.3.6.1.4.1.11.2.14.11.1.4.20.2.2.1.1
This specifies the control action for this entity
OBJECT-TYPE    
  ReloadControl  

hpicfReloadDateTime 1.3.6.1.4.1.11.2.14.11.1.4.20.2.2.1.2
The object specifies the time and date at which the last reload will occured
OBJECT-TYPE    
  DateAndTime  

hpicfReloadGroups 1.3.6.1.4.1.11.2.14.11.1.4.20.3.1
OBJECT IDENTIFIER    

hpicfReloadCompliances 1.3.6.1.4.1.11.2.14.11.1.4.20.3.2
OBJECT IDENTIFIER    

hpicfReloadGroup 1.3.6.1.4.1.11.2.14.11.1.4.20.3.1.1
A collection of objects for reload command.
OBJECT-GROUP    

hpicfReloadFullCompliance1 1.3.6.1.4.1.11.2.14.11.1.4.20.3.2.1
The compliance statement for SNMP entities which implement the RELOAD-MIB with support for writable objects and notifications. Such an implementation can be both monitored and configured via SNMP. It can also send notifications about change in the operational status of the Reload application.
MODULE-COMPLIANCE    

hpicfReloadFullCompliance2 1.3.6.1.4.1.11.2.14.11.1.4.20.3.2.2
The compliance statement for SNMP entities which implement the RELOAD-MIB with support for writable objects. Such an implementation can be both monitored and configured via SNMP.
MODULE-COMPLIANCE    

hpicfReloadReadOnlyCompliance1 1.3.6.1.4.1.11.2.14.11.1.4.20.3.2.3
Write access is not required.
MODULE-COMPLIANCE