HM2-PLATFORM-QOS-ACL-MIB

File: HM2-PLATFORM-QOS-ACL-MIB.mib (72529 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-TC	IF-MIB
HM2-PLATFORM-QOS-MIB	HM2-TC-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	NOTIFICATION-TYPE
OBJECT-IDENTITY	IpAddress	Integer32
Unsigned32	Counter64	Gauge32
TEXTUAL-CONVENTION	RowStatus	MacAddress
TruthValue	DisplayString	TimeStamp
InterfaceIndexOrZero	hm2PlatformQoS	HmEnabledStatus

Defined Types

EtypeValue
Ethertype value of a packet. The allowed value is 0x0600 to 0xFFFF. A value of 0 indicates, that this field is not used.
TEXTUAL-CONVENTION
	Unsigned32	0..65535

Ipv6AddressPrefix
This data type is used to model IPv6 address prefixes. This is a binary string of up to 16 octets in network byte order.
TEXTUAL-CONVENTION
	OCTET STRING	Size(0..16)

AclBurstSize
The number of kilobytes (Kbytes) in a packet that may be sent in a traffic stream without regard for other traffic streams.
TEXTUAL-CONVENTION
	Unsigned32	0 \| 1..128

Hm2PortOperator
The operator of a source/destination tcp/udp port for ip acl classes.
TEXTUAL-CONVENTION
	INTEGER	eq(0), neq(1), lt(2), gt(3)

Hm2AgentAclEntry
SEQUENCE
	hm2AgentAclIndex	Integer32
	hm2AgentAclStatus	RowStatus
	hm2AgentAclName	DisplayString
	hm2AgentAclStatsAction	INTEGER

Hm2AgentAclIfEntry
SEQUENCE
	hm2AgentAclIfIndex	Integer32
	hm2AgentAclIfDirection	INTEGER
	hm2AgentAclIfSequence	Unsigned32
	hm2AgentAclIfAclType	INTEGER
	hm2AgentAclIfAclId	Integer32
	hm2AgentAclIfStatus	RowStatus

Hm2AgentAclRuleEntry
SEQUENCE
	hm2AgentAclRuleIndex	Integer32
	hm2AgentAclRuleAction	INTEGER
	hm2AgentAclRuleProtocol	Integer32
	hm2AgentAclRuleSrcIpAddress	IpAddress
	hm2AgentAclRuleSrcIpMask	IpAddress
	hm2AgentAclRuleSrcL4Port	Integer32
	hm2AgentAclRuleSrcL4PortRangeStart	Integer32
	hm2AgentAclRuleSrcL4PortRangeEnd	Integer32
	hm2AgentAclRuleDestIpAddress	IpAddress
	hm2AgentAclRuleDestIpMask	IpAddress
	hm2AgentAclRuleDestL4Port	Integer32
	hm2AgentAclRuleDestL4PortRangeStart	Integer32
	hm2AgentAclRuleDestL4PortRangeEnd	Integer32
	hm2AgentAclRuleIPDSCP	Integer32
	hm2AgentAclRuleIpPrecedence	Integer32
	hm2AgentAclRuleIpTosBits	Integer32
	hm2AgentAclRuleIpTosMask	Integer32
	hm2AgentAclRuleStatus	RowStatus
	hm2AgentAclRuleAssignQueueId	Unsigned32
	hm2AgentAclRuleRedirectIntf	InterfaceIndexOrZero
	hm2AgentAclRuleMatchEvery	TruthValue
	hm2AgentAclRuleMirrorIntf	InterfaceIndexOrZero
	hm2AgentAclRuleLogging	TruthValue
	hm2AgentAclRuleTimeRangeName	DisplayString
	hm2AgentAclRuleTimeRangeStatus	INTEGER
	hm2AgentAclRuleRedirectExtAgentId	Unsigned32
	hm2AgentAclRuleIcmpType	Integer32
	hm2AgentAclRuleIcmpCode	Integer32
	hm2AgentAclRuleIgmpType	Integer32
	hm2AgentAclRuleEstablished	TruthValue
	hm2AgentAclRuleFragments	TruthValue
	hm2AgentAclRuleIndexNextFree	Integer32
	hm2AgentAclRuleRateLimitCrateUnit	INTEGER
	hm2AgentAclRuleRateLimitCrate	Unsigned32
	hm2AgentAclRuleRateLimitCburst	AclBurstSize
	hm2AgentAclRuleStatsAction	INTEGER
	hm2AgentAclRuleHitCount	Counter64
	hm2AgentAclRuleHitCountDiscontinuityTime	TimeStamp
	hm2AgentAclRuleTcpFlagBits	Integer32
	hm2AgentAclRuleTcpFlagMask	Integer32
	hm2AgentAclRuleSrcL4PortOperator	Hm2PortOperator
	hm2AgentAclRuleDstL4PortOperator	Hm2PortOperator

Hm2AgentAclMacEntry
SEQUENCE
	hm2AgentAclMacIndex	Integer32
	hm2AgentAclMacName	DisplayString
	hm2AgentAclMacStatus	RowStatus
	hm2AgentAclMacStatsAction	INTEGER

Hm2AgentAclMacRuleEntry
SEQUENCE
	hm2AgentAclMacRuleIndex	Integer32
	hm2AgentAclMacRuleAction	INTEGER
	hm2AgentAclMacRuleCos	Unsigned32
	hm2AgentAclMacRuleCos2	Unsigned32
	hm2AgentAclMacRuleDestMacAddr	MacAddress
	hm2AgentAclMacRuleDestMacMask	MacAddress
	hm2AgentAclMacRuleEtypeKey	INTEGER
	hm2AgentAclMacRuleEtypeValue	EtypeValue
	hm2AgentAclMacRuleSrcMacAddr	MacAddress
	hm2AgentAclMacRuleSrcMacMask	MacAddress
	hm2AgentAclMacRuleVlanId	Unsigned32
	hm2AgentAclMacRuleVlanIdRangeStart	Unsigned32
	hm2AgentAclMacRuleVlanIdRangeEnd	Unsigned32
	hm2AgentAclMacRuleVlanId2	Unsigned32
	hm2AgentAclMacRuleVlanId2RangeStart	Unsigned32
	hm2AgentAclMacRuleVlanId2RangeEnd	Unsigned32
	hm2AgentAclMacRuleStatus	RowStatus
	hm2AgentAclMacRuleAssignQueueId	Unsigned32
	hm2AgentAclMacRuleRedirectIntf	InterfaceIndexOrZero
	hm2AgentAclMacRuleMatchEvery	TruthValue
	hm2AgentAclMacRuleMirrorIntf	InterfaceIndexOrZero
	hm2AgentAclMacRuleLogging	TruthValue
	hm2AgentAclMacRuleTimeRangeName	DisplayString
	hm2AgentAclMacRuleTimeRangeStatus	INTEGER
	hm2AgentAclMacRuleIndexNextFree	Integer32
	hm2AgentAclMacRuleRateLimitCrateUnit	INTEGER
	hm2AgentAclMacRuleRateLimitCrate	Unsigned32
	hm2AgentAclMacRuleRateLimitCburst	AclBurstSize
	hm2AgentAclMacRuleStatsAction	INTEGER
	hm2AgentAclMacRuleHitCount	Counter64
	hm2AgentAclMacRuleHitCountDiscontinuityTime	TimeStamp

Hm2AgentAclVlanEntry
SEQUENCE
	hm2AgentAclVlanIndex	Integer32
	hm2AgentAclVlanDirection	INTEGER
	hm2AgentAclVlanSequence	Unsigned32
	hm2AgentAclVlanAclType	INTEGER
	hm2AgentAclVlanAclId	Integer32
	hm2AgentAclVlanStatus	RowStatus

Defined Values

hm2PlatformQosAcl		1.3.6.1.4.1.248.12.3.2
The Hirschmann Platform2 MIB for Access Control Lists (ACL). Copyright (C) 2012. All Rights Reserved.
MODULE-IDENTITY

hm2AgentAclNamedIpv4IndexNextFree		1.3.6.1.4.1.248.12.3.2.14
This object contains an unused value for the hm2AgentAclIndex to be used when creating a new named IPv4 ACL. A value of zero indicates the ACL table is full. For MSP devices the IPv4 ACL indexes start with 1000.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hm2AgentAclTable		1.3.6.1.4.1.248.12.3.2.1
A table of ACL instances.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hm2AgentAclEntry

hm2AgentAclEntry		1.3.6.1.4.1.248.12.3.2.1.1
An ACL instance table entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	Hm2AgentAclEntry

hm2AgentAclIndex		1.3.6.1.4.1.248.12.3.2.1.1.1
The IP ACL table index this instance is associated with. For MSP devices the IPv4 ACL indexes start with 1000.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..2147483647

hm2AgentAclStatus		1.3.6.1.4.1.248.12.3.2.1.1.2
Status of this instance. Entries can not be deleted until all rows in the hm2AgentAclIfTable and hm2AgentAclRuleTable with corresponding values of hm2AgentAclIndex have been deleted. active(1) - this ACL instance is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hm2AgentAclName		1.3.6.1.4.1.248.12.3.2.1.1.3
The name of this IPv4 ACL entry, which must consist of 1 to 31 alphanumeric characters and uniquely identify this IPv4 ACL. An existing IPv4 ACL can be renamed by setting this object to a new name. This object must be set to complete a new IPv4 ACL row instance.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(1..31)

hm2AgentAclStatsAction		1.3.6.1.4.1.248.12.3.2.1.1.248
Setting the object to 'flushAclHitCount(2)' will reset hit counter statistics for all rules in this ACL. Reading the object always returns 'other'.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	other(1), flushAclHitCount(2)

hm2AgentAclIfTable		1.3.6.1.4.1.248.12.3.2.8
A table of ACL interface instances per direction.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hm2AgentAclIfEntry

hm2AgentAclIfEntry		1.3.6.1.4.1.248.12.3.2.8.1
An ACL interface instance entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	Hm2AgentAclIfEntry

hm2AgentAclIfIndex		1.3.6.1.4.1.248.12.3.2.8.1.1
The interface index to which this ACL instance applies.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..2147483647

hm2AgentAclIfDirection		1.3.6.1.4.1.248.12.3.2.8.1.2
The interface direction to which this ACL instance applies.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	inbound(1), outbound(2)

hm2AgentAclIfSequence		1.3.6.1.4.1.248.12.3.2.8.1.3
The relative evaluation sequence of this ACL for this interface and direction. When multiple ACLs are allowed for a given interface and direction, the sequence number determines the order in which the list of ACLs are evaluated, with lower sequence numbers given higher precedence. The sequence number value is arbitrary, but must be a unique non-zero value for a given interface and direction. Setting this object to an existing sequence number value for a given interface and direction causes the ACL corresponding to that value to be replaced with this ACL.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..4294967295

hm2AgentAclIfAclType		1.3.6.1.4.1.248.12.3.2.8.1.4
The type of this ACL, which is used to interpret the hm2AgentAclIfId object value. Each type of ACL uses its own numbering scheme for identification (see hm2AgentAclIfAclId object for details). The hm2AgentAclIfAclId object must be specified along with this object.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	ip(1), mac(2), ipv6(3)

hm2AgentAclIfAclId		1.3.6.1.4.1.248.12.3.2.8.1.5
The ACL identifier value, which is interpreted based on the hm2AgentAclIfType object. For the IP ACLs, the actual ACL number is its identifier as follows: IP standard ranges from 1-99, while IP extended ranges from 100-199. Here, hm2AgentAclIfAclId represents hm2AgentAclIndex. The MAC ACLs use an internally generated index value that is assigned when the ACL is created. Here, hm2AgentAclIfAclId represents hm2AgentAclMacIndex. The IPv6 ACLs use an internally generated index value that is assigned when the ACL is created. Here, hm2AgentAclVlanAclId represents hm2AgentAclIpv6Index. The hm2AgentAclIfType object must be specified along with this object.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Integer32	0..2147483647

hm2AgentAclIfStatus		1.3.6.1.4.1.248.12.3.2.8.1.6
Status of this instance. active(1) - this ACL interface instance is active createAndGo(4) - set to this value to assign an ACL to an interface and direction destroy(6) - set to this value to remove an ACL from an interface and direction
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hm2AgentAclRuleTable		1.3.6.1.4.1.248.12.3.2.4
A table of IP ACL rule instances.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hm2AgentAclRuleEntry

hm2AgentAclRuleEntry		1.3.6.1.4.1.248.12.3.2.4.1
A table of IP ACL Classification Rules
Status: current	Access: not-accessible
OBJECT-TYPE
	Hm2AgentAclRuleEntry

hm2AgentAclRuleIndex		1.3.6.1.4.1.248.12.3.2.4.1.1
The index of this rule instance within an IP ACL.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..2147483647

hm2AgentAclRuleAction		1.3.6.1.4.1.248.12.3.2.4.1.2
The type of action this rule should perform.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	permit(1), deny(2)

hm2AgentAclRuleProtocol		1.3.6.1.4.1.248.12.3.2.4.1.3
icmp - 1 igmp - 2 ip-in-ip - 4 tcp - 6 udp - 17 ip - 255 (ip all) All values from 1 to 255 are valid. 0 disables this match criteria.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	-1 \| 0..255

hm2AgentAclRuleSrcIpAddress		1.3.6.1.4.1.248.12.3.2.4.1.4
The source IP address used in the ACL classification.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

hm2AgentAclRuleSrcIpMask		1.3.6.1.4.1.248.12.3.2.4.1.5
The Source IP mask used in the ACL classification. This mask is expressed using wild-card notation, which is the 1's compliment of traditional subnet masks. Here, the 'don't care bits' are represented by binary 1's and 'do care bits' are represented by binary 0's.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

hm2AgentAclRuleSrcL4Port		1.3.6.1.4.1.248.12.3.2.4.1.6
The source port number (Layer 4) used in the ACL classification. A value of -1 disables this criteria.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hm2AgentAclRuleSrcL4PortRangeStart		1.3.6.1.4.1.248.12.3.2.4.1.7
The source port number(Layer 4) range start.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hm2AgentAclRuleSrcL4PortRangeEnd		1.3.6.1.4.1.248.12.3.2.4.1.8
The source port number(Layer 4) range end.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hm2AgentAclRuleDestIpAddress		1.3.6.1.4.1.248.12.3.2.4.1.9
The destination IP address used in the ACL classification.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

hm2AgentAclRuleDestIpMask		1.3.6.1.4.1.248.12.3.2.4.1.10
The destination IP mask used in the ACL classification. This mask is expressed using wild-card notation, which is the 1's compliment of traditional subnet masks. Here, the 'don't care bits' are represented by binary 1's and 'do care bits' are represented by binary 0's.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

hm2AgentAclRuleDestL4Port		1.3.6.1.4.1.248.12.3.2.4.1.11
The destination port number(Layer 4) used in ACl classification.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hm2AgentAclRuleDestL4PortRangeStart		1.3.6.1.4.1.248.12.3.2.4.1.12
The destination port number(Layer 4) starting range used in ACL classification.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hm2AgentAclRuleDestL4PortRangeEnd		1.3.6.1.4.1.248.12.3.2.4.1.13
The destination port number(Layer 4) ending range used in ACL classification.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hm2AgentAclRuleIPDSCP		1.3.6.1.4.1.248.12.3.2.4.1.14
The Differentiated Services Code Point value. A value of -1 indicates that this field is not used.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hm2AgentAclRuleIpPrecedence		1.3.6.1.4.1.248.12.3.2.4.1.15
The type of service (TOS) IP precedence value. A value of -1 indicates that this field is not used.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hm2AgentAclRuleIpTosBits		1.3.6.1.4.1.248.12.3.2.4.1.16
The type of service (TOS) bits value.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hm2AgentAclRuleIpTosMask		1.3.6.1.4.1.248.12.3.2.4.1.17
The type of service (TOS) mask value.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hm2AgentAclRuleStatus		1.3.6.1.4.1.248.12.3.2.4.1.18
Status of this instance. active(1) - this ACL rule is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hm2AgentAclRuleAssignQueueId		1.3.6.1.4.1.248.12.3.2.4.1.19
Queue identifier to which all inbound packets matching this ACL rule are directed. This object defaults to the standard queue assignment for user priority 0 traffic per the IEEE 802.1D specification based on the number of assignable queues in the system: 1-3 queues: 0 4-7 queues: 1 8 queues: 2 This default assignment is static and is not influenced by other system configuration changes. A value of 4294967295 indicates that this field is not used
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..7 \| 4294967295

hm2AgentAclRuleRedirectIntf		1.3.6.1.4.1.248.12.3.2.4.1.20
A non-zero value indicates the external ifIndex to which all inbound packets matching this ACL rule are directed. A value of zero means packet redirection is not in effect, which is the default value of this object. Note that packet redirection and mirroring (hm2AgentAclRuleMirrorIntf object) are mutually exclusive rule attributes.
Status: current	Access: read-create
OBJECT-TYPE
	InterfaceIndexOrZero

hm2AgentAclRuleMatchEvery		1.3.6.1.4.1.248.12.3.2.4.1.21
Flag to indicate that the ACL rule is defined to match on every IP packet, regardless of content.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

hm2AgentAclRuleMirrorIntf		1.3.6.1.4.1.248.12.3.2.4.1.22
A non-zero value indicates the external ifIndex to which all inbound packets matching this ACL rule are copied. A value of zero means packet mirroring is not in effect, which is the default value of this object. Note that packet mirroring and redirection (hm2AgentAclRuleRedirectIntf object) are mutually exclusive rule attributes.
Status: current	Access: read-create
OBJECT-TYPE
	InterfaceIndexOrZero

hm2AgentAclRuleLogging		1.3.6.1.4.1.248.12.3.2.4.1.23
Flag to indicate that the ACL rule is being logged. A hardware count of the number of packets that match this rule is reported via the hm2AgentAclTrapRuleLogEvent notification. This object may be supported for a hm2AgentAclRuleAction setting of permit(1) and/or deny(2), depending on the ACL feature capabilities of the device.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

hm2AgentAclRuleTimeRangeName		1.3.6.1.4.1.248.12.3.2.4.1.24
Name of the time range, that the ACL rule has referenced. It has to start with a character and shall consist of 0 to 31 alphanumeric characters.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..31)

hm2AgentAclRuleTimeRangeStatus		1.3.6.1.4.1.248.12.3.2.4.1.25
Flag that indicates the ACL rule status. If the status is active, it implies that the ACL rule is in effect. If the status is inactive, it implies that the ACL rule is not in effect.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	inactive(1), active(2)

hm2AgentAclRuleRedirectExtAgentId		1.3.6.1.4.1.248.12.3.2.4.1.28
A non-zero value indicates the external control plane application agentId to which all inbound packets matching this ACL rule are directed. A value of zero means redirection is not in effect, which is the default value of this object. Note that this action is mutually exclusive with redirect to interface(aclRuleRedirectIntf object) and mirroring (aclRuleMirrorIntf object) rule attributes.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0 \| 1..100

hm2AgentAclRuleIcmpType		1.3.6.1.4.1.248.12.3.2.4.1.29
ACL rule matches on the specified ICMP type. All values from 0 to 255 are valid. A value of -1 indicates that this field is not used.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	-1 \| 0..255

hm2AgentAclRuleIcmpCode		1.3.6.1.4.1.248.12.3.2.4.1.30
ACL rule matches on the specified ICMP code. All values from 0 to 255 are valid. A value of -1 indicates that this field is not used.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	-1 \| 0..255

hm2AgentAclRuleIgmpType		1.3.6.1.4.1.248.12.3.2.4.1.31
ACL rule matches on the specified IGMP type. All values from 1 to 255 are valid.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0 \| 1..255

hm2AgentAclRuleEstablished		1.3.6.1.4.1.248.12.3.2.4.1.32
Flag to indicate the ACL rule to match on TCP packets that has either RST or ACK bits set in the TCP header
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

hm2AgentAclRuleFragments		1.3.6.1.4.1.248.12.3.2.4.1.33
Flag to indicate the ACL rule to match if the packet is fragmented
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

hm2AgentAclRuleIndexNextFree		1.3.6.1.4.1.248.12.3.2.4.1.248
This object contains an unused value for the hm2AgentAclRuleIndex to be used when creating a new named IPv4 ACL. A value of zero indicates the ACL rule table is full.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hm2AgentAclRuleRateLimitCrateUnit		1.3.6.1.4.1.248.12.3.2.4.1.249
The unit of the aclRuleRateLimitCrate. Can be either packets per second (pps) or kilobits per second (kbps).
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	pps(1), kbps(2)

hm2AgentAclRuleRateLimitCrate		1.3.6.1.4.1.248.12.3.2.4.1.250
Committed rate attribute statement value, specified in kbps. Value 0 disables this match criteria.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..10000000

hm2AgentAclRuleRateLimitCburst		1.3.6.1.4.1.248.12.3.2.4.1.251
Committed burst size attribute statement value, specified in kbytes. Value 0 disables this match criteria.
Status: current	Access: read-create
OBJECT-TYPE
	AclBurstSize

hm2AgentAclRuleStatsAction		1.3.6.1.4.1.248.12.3.2.4.1.252
Setting the object to 'flushRuleHitCount(2)' will reset hit counter statistics. Reading the object always returns 'other'.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	other(1), flushRuleHitCount(2)

hm2AgentAclRuleHitCount		1.3.6.1.4.1.248.12.3.2.4.1.253
Number of packets that matched the ACL rule.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hm2AgentAclRuleHitCountDiscontinuityTime		1.3.6.1.4.1.248.12.3.2.4.1.254
The value of sysUpTime on the most recent occasion at which any one or more of this rule's counters suffered a discontinuity. If no such discontinuities have occurred since the last re- initialization of the local management subsystem, then this object contains a zero value.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

hm2AgentAclRuleTcpFlagBits		1.3.6.1.4.1.248.12.3.2.4.1.255
The TCP flag value.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hm2AgentAclRuleTcpFlagMask		1.3.6.1.4.1.248.12.3.2.4.1.256
The TCP flag mask value.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hm2AgentAclRuleSrcL4PortOperator		1.3.6.1.4.1.248.12.3.2.4.1.257
The operator for the source port.
Status: current	Access: read-create
OBJECT-TYPE
	Hm2PortOperator

hm2AgentAclRuleDstL4PortOperator		1.3.6.1.4.1.248.12.3.2.4.1.258
The operator for the destination port.
Status: current	Access: read-create
OBJECT-TYPE
	Hm2PortOperator

hm2AgentAclMacIndexNextFree		1.3.6.1.4.1.248.12.3.2.5
This object contains an unused value for the hm2AgentAclMacIndex to be used when creating a new MAC ACL. A value of zero indicates the ACL table is full. For MSP devices the MAC ACL indexes start with 10000.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hm2AgentAclMacTable		1.3.6.1.4.1.248.12.3.2.6
A table of MAC ACL instances.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hm2AgentAclMacEntry

hm2AgentAclMacEntry		1.3.6.1.4.1.248.12.3.2.6.1
An ACL MAC instance table entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	Hm2AgentAclMacEntry

hm2AgentAclMacIndex		1.3.6.1.4.1.248.12.3.2.6.1.1
The MAC ACL table index this instance is associated with. When creating a new MAC ACL, refer to the hm2AgentAclMacIndexNextFree object to determine the next available hm2AgentAclMacIndex to use. For MSP devices the MAC ACL indexes start with 10000.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..2147483647

hm2AgentAclMacName		1.3.6.1.4.1.248.12.3.2.6.1.2
The name of this MAC ACL entry, which must consist of 1 to 31 alphanumeric characters and uniquely identify this MAC ACL. An existing MAC ACL can be renamed by setting this object to a new name. This object must be set to complete a new MAC ACL row instance.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(1..31)

hm2AgentAclMacStatus		1.3.6.1.4.1.248.12.3.2.6.1.3
Status of this instance. ACL MAC entries can not be deleted until all rows in the hm2AgentAclIfTable and hm2AgentAclRuleTable with corresponding values of hm2AgentAclMacIndex have been deleted. active(1) - this ACL instance is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance The hm2AgentAclMacName object must be set to complete this row instance.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hm2AgentAclMacStatsAction		1.3.6.1.4.1.248.12.3.2.6.1.248
Setting the object to 'flushAclHitCount(2)' will reset hit counter statistics for the rules in this ACL. Reading the object always returns 'other'.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	other(1), flushAclHitCount(2)

hm2AgentAclMacRuleTable		1.3.6.1.4.1.248.12.3.2.7
A table of layer 2 MAC ACL rule instances.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hm2AgentAclMacRuleEntry

hm2AgentAclMacRuleEntry		1.3.6.1.4.1.248.12.3.2.7.1
A table of layer 2 MAC ACL classification rules.
Status: current	Access: not-accessible
OBJECT-TYPE
	Hm2AgentAclMacRuleEntry

hm2AgentAclMacRuleIndex		1.3.6.1.4.1.248.12.3.2.7.1.1
The index of this rule instance within an MAC ACL.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..2147483647

hm2AgentAclMacRuleAction		1.3.6.1.4.1.248.12.3.2.7.1.2
The type of action this MAC ACL rule should perform.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	permit(1), deny(2)

hm2AgentAclMacRuleCos		1.3.6.1.4.1.248.12.3.2.7.1.3
The class of service (COS) used in the MAC ACL classification. This is the three-bit user priority field in the 802.1Q tag header of a tagged Ethernet frame. For frames containing a double VLAN tag, this field is located in the first/outer tag. A value of 4294967295 indicates that this field is not used.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..7 \| 4294967295

hm2AgentAclMacRuleCos2		1.3.6.1.4.1.248.12.3.2.7.1.4
The secondary class of service (COS2) used in the MAC ACL classification. This is the three-bit user priority field in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet frame. A value of 4294967295 indicates that this field is not used.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..7 \| 4294967295

hm2AgentAclMacRuleDestMacAddr		1.3.6.1.4.1.248.12.3.2.7.1.5
The destination MAC address used in the MAC ACL classification.
Status: current	Access: read-create
OBJECT-TYPE
	MacAddress

hm2AgentAclMacRuleDestMacMask		1.3.6.1.4.1.248.12.3.2.7.1.6
The destination MAC address mask used in the MAC ACL classification. This mask value identifies the portion of the hm2AgentAclMacRuleDestMacAddr that is compared against a packet. The 'don't care bits' are represented by binary 0's and 'do care bits' are represented by binary 1's. A non-contiguous mask value is permitted.
Status: current	Access: read-create
OBJECT-TYPE
	MacAddress

hm2AgentAclMacRuleEtypeKey		1.3.6.1.4.1.248.12.3.2.7.1.7
The Ethertype keyword used in the MAC ACL classification. A keyword of custom(1) requires that the hm2AgentAclMacRuleEtypeValue object also be set.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	custom(1), appletalk(2), arp(3), ibmsna(4), ipv4(5), ipv6(6), ipxold(7), mplsmcast(8), mplsucast(9), netbios(10), novell(11), pppoedisc(12), rarp(13), pppoesess(14), ipxnew(15), profinet(16), powerlink(17), ethercat(18), pppoe(248)

hm2AgentAclMacRuleEtypeValue		1.3.6.1.4.1.248.12.3.2.7.1.8
The Ethertype custom value used in the MAC ACL classification. This object is only valid if the hm2AgentAclMacRuleEtypeKey is set to custom(1). Values ranging from 0x0600 to 0xFFFF (1536 to 65535) are interpreted as the Ethertype. Lower values are interpreted as frame size. A value of 0 indicates that this field is not used.
Status: current	Access: read-create
OBJECT-TYPE
	EtypeValue

hm2AgentAclMacRuleSrcMacAddr		1.3.6.1.4.1.248.12.3.2.7.1.9
The source MAC address used in the MAC ACL classification.
Status: current	Access: read-create
OBJECT-TYPE
	MacAddress

hm2AgentAclMacRuleSrcMacMask		1.3.6.1.4.1.248.12.3.2.7.1.10
The source MAC address mask used in the MAC ACL classification. This mask value identifies the portion of the hm2AgentAclMacRuleSrcMacAddr that is compared against a packet. The 'don't care bits' are represented by binary 0's and 'do care bits' are represented by binary 1's. A non-contiguous mask value is permitted.
Status: current	Access: read-create
OBJECT-TYPE
	MacAddress

hm2AgentAclMacRuleVlanId		1.3.6.1.4.1.248.12.3.2.7.1.11
The VLAN ID value used in the MAC ACL classification. The VLAN ID field is defined as the 12-bit VLAN identifier in the 802.1Q tag header of a tagged Ethernet frame which is contained in the first/outer tag of a double VLAN tagged frame.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..4042

hm2AgentAclMacRuleVlanIdRangeStart		1.3.6.1.4.1.248.12.3.2.7.1.12
The VLAN ID range start value used in the MAC ACL classification. Setting this value greater than the current hm2AgentAclMacRuleVlanIdRangeEnd changes the VLAN ID range end to the same value as the range start. The VLAN ID field is defined as the 12-bit VLAN identifier in the 802.1Q tag header of a tagged Ethernet frame which is contained in the first/outer tag of a double VLAN tagged frame.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..4042

hm2AgentAclMacRuleVlanIdRangeEnd		1.3.6.1.4.1.248.12.3.2.7.1.13
The VLAN ID range end value used in the MAC ACL classification. Setting this value less than the current hm2AgentAclMacRuleVlanIdRangeStart changes the VLAN ID range start to the same value as the range end. The VLAN ID field is defined as the 12-bit VLAN identifier in the 802.1Q tag header of a tagged Ethernet frame which is contained in the first/outer tag of a double VLAN tagged frame.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..4042

hm2AgentAclMacRuleVlanId2		1.3.6.1.4.1.248.12.3.2.7.1.14
The secondary VLAN ID value used in the MAC ACL classification. The secondary VLAN ID field is defined as the 12-bit VLAN identifier in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet frame.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..4042

hm2AgentAclMacRuleVlanId2RangeStart		1.3.6.1.4.1.248.12.3.2.7.1.15
The secondary VLAN ID range start value used in the MAC ACL classification. Setting this value greater than the current hm2AgentAclMacRuleVlanId2RangeEnd changes the Secondary VLAN ID range end to the same value as the range start. The secondary VLAN ID field is defined as the 12-bit VLAN identifier in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet frame.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..4042

hm2AgentAclMacRuleVlanId2RangeEnd		1.3.6.1.4.1.248.12.3.2.7.1.16
The secondary VLAN ID range end value used in the MAC ACL classification. Setting this value less than the current hm2AgentAclMacRuleVlanId2RangeStart changes the Secondary VLAN ID range start to the same value as the range end. The secondary VLAN ID field is defined as the 12-bit VLAN identifier in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet frame.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..4042

hm2AgentAclMacRuleStatus		1.3.6.1.4.1.248.12.3.2.7.1.17
Status of this instance. active(1) - this ACL Rule is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hm2AgentAclMacRuleAssignQueueId		1.3.6.1.4.1.248.12.3.2.7.1.18
Queue identifier to which all inbound packets matching this MAC ACL rule are directed. This object defaults to the standard queue assignment for user priority 0 traffic per the IEEE 802.1D specification based on the number of assignable queues in the system: 1-3 queues: 0 4-7 queues: 1 8 queues: 2 This default assignment is static and is not influenced by other system configuration changes. A value of 4294967295 indicates that this field is not used
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..7 \| 4294967295

hm2AgentAclMacRuleRedirectIntf		1.3.6.1.4.1.248.12.3.2.7.1.19
A non-zero value indicates the external ifIndex to which all inbound packets matching this MAC ACL rule are directed. A value of zero means packet redirection is not in effect, which is the default value of this object. Note that packet redirection and mirroring (hm2AgentAclMacRuleMirrorIntf object) are mutually exclusive rule attributes.
Status: current	Access: read-create
OBJECT-TYPE
	InterfaceIndexOrZero

hm2AgentAclMacRuleMatchEvery		1.3.6.1.4.1.248.12.3.2.7.1.20
Flag to indicate that the MAC ACL rule is defined to match all packets, regardless of Ethertype.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

hm2AgentAclMacRuleMirrorIntf		1.3.6.1.4.1.248.12.3.2.7.1.21
A non-zero value indicates the external ifIndex to which all inbound packets matching this MAC ACL rule are copied. A value of zero means packet mirroring is not in effect, which is the default value of this object. Note that packet mirroring and redirection (hm2AgentAclMacRuleRedirectIntf object) are mutually exclusive rule attributes.
Status: current	Access: read-create
OBJECT-TYPE
	InterfaceIndexOrZero

hm2AgentAclMacRuleLogging		1.3.6.1.4.1.248.12.3.2.7.1.22
Flag to indicate that the ACL rule is being logged. A hardware count of the number of packets that match this rule is reported via the hm2AgentAclTrapRuleLogEvent notification. This object may be supported for an hm2AgentAclMacRuleAction setting of permit(1) and/or deny(2), depending on the ACL feature capabilities of the device.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

hm2AgentAclMacRuleTimeRangeName		1.3.6.1.4.1.248.12.3.2.7.1.23
Name of the time range, that the ACL rule has referenced. It has to start with a character and shall consist of 0 to 31 alphanumeric characters.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..31)

hm2AgentAclMacRuleTimeRangeStatus		1.3.6.1.4.1.248.12.3.2.7.1.24
Flag that indicates the ACL rule status. If the status is active, it implies that the ACL rule is in effect. If the status is inactive, it implies that the ACL rule is not in effect.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	inactive(1), active(2)

hm2AgentAclMacRuleIndexNextFree		1.3.6.1.4.1.248.12.3.2.7.1.248
This object contains an unused value for the hm2AgentAclMacRuleIndex to be used when creating a new MAC ACL. A value of zero indicates the ACL rule table is full.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hm2AgentAclMacRuleRateLimitCrateUnit		1.3.6.1.4.1.248.12.3.2.7.1.249
The unit of the aclMacRuleRateLimitCrate. Can be either packets per second (pps) or kilobits per second (kbps).
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	pps(1), kbps(2)

hm2AgentAclMacRuleRateLimitCrate		1.3.6.1.4.1.248.12.3.2.7.1.250
Committed rate attribute statement value, specified in kbps. Value 0 disables this match criteria.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..10000000

hm2AgentAclMacRuleRateLimitCburst		1.3.6.1.4.1.248.12.3.2.7.1.251
Committed burst size attribute statement value, specified in kbytes. Value 0 disables this match criteria.
Status: current	Access: read-create
OBJECT-TYPE
	AclBurstSize

hm2AgentAclMacRuleStatsAction		1.3.6.1.4.1.248.12.3.2.7.1.252
Setting the object to 'flushRuleHitCount(2)' will reset hit counter statistics. Reading the object always returns 'other'.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	other(1), flushRuleHitCount(2)

hm2AgentAclMacRuleHitCount		1.3.6.1.4.1.248.12.3.2.7.1.253
Number of packets that matched the ACL rule.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hm2AgentAclMacRuleHitCountDiscontinuityTime		1.3.6.1.4.1.248.12.3.2.7.1.254
The value of sysUpTime on the most recent occasion at which any one or more of this rule's counters suffered a discontinuity. If no such discontinuities have occurred since the last re- initialization of the local management subsystem, then this object contains a zero value.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

hm2AgentAclLoggingGroup		1.3.6.1.4.1.248.12.3.2.9
OBJECT IDENTIFIER

hm2AgentAclTrapRuleIndex		1.3.6.1.4.1.248.12.3.2.9.2
The index of an ACL rule instance. Used by hm2AgentAclTrapRuleLogEvent trap.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Integer32	0..2147483647

hm2AgentAclTrapRuleAction		1.3.6.1.4.1.248.12.3.2.9.3
The type of action this rule should perform, either permit(1) or deny(2). Used by hm2AgentAclTrapRuleLogEvent trap.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	permit(1), deny(2)

hm2AgentAclTrapRuleHitCount		1.3.6.1.4.1.248.12.3.2.9.4
Number of packets that matched the ACL rule during the most recent logging interval. Used by hm2AgentAclTrapRuleLogEvent trap.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Counter64

hm2AgentAclTrapFlag		1.3.6.1.4.1.248.12.3.2.9.5
ACL Trap Flag - Enables or disables ACL trap generation. When this value is set to enable(1), ACL traps are sent from the switch when they occur.
Status: current	Access: read-write
OBJECT-TYPE
	HmEnabledStatus

hm2AgentAclTrapRuleTimeRangeName		1.3.6.1.4.1.248.12.3.2.9.6
Name of the time range on which there is a notification received. Used by hm2AgentAclTrapRuleTimeRangeEvent trap.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	DisplayString	Size(1..31)

hm2AgentAclTrapRuleTimeRangeNotification		1.3.6.1.4.1.248.12.3.2.9.7
Flag to indicate the type of time range notification received. Used by hm2AgentAclTrapRuleTimeRangeEvent trap.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	activate(1), deactivate(2), delete(3)

hm2AgentAclTrapRuleInstallationStatus		1.3.6.1.4.1.248.12.3.2.9.8
Value specifies the status of the ACL Rule installed in hardware as activated/deactivated. Used by hm2AgentAclTrapRuleTimeRangeEvent trap.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	failure(1), success(2)

hm2AgentAclTrapRuleHitCountHigh		1.3.6.1.4.1.248.12.3.2.9.248
Upper 32bit of number of packets that matched the ACL rule during the most recent logging interval. Used by hm2AgentAclTrapRuleLogEventV1 trap.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Gauge32

hm2AgentAclTrapRuleHitCountLow		1.3.6.1.4.1.248.12.3.2.9.249
Lower 32bit of number of packets that matched the ACL rule during the most recent logging interval. Used by hm2AgentAclTrapRuleLogEventV1 trap.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Gauge32

hm2AgentAclNotifications		1.3.6.1.4.1.248.12.3.2.0
OBJECT IDENTIFIER

hm2AgentAclTrapRuleLogEvent		1.3.6.1.4.1.248.12.3.2.0.1
This trap is generated on a periodic basis to indicate that an ACL rule configured for logging was actively used by hardware to take action on one or more packets. The hm2AgentAclTrapRuleHitCount denotes the number of packets that matched this rule during the most recent logging interval. ACL trap generation requires that the hm2AgentAclTrapFlag object is set to enable(1).
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hm2AgentAclTrapRuleTimeRangeEvent		1.3.6.1.4.1.248.12.3.2.0.2
This trap is generated when there is a time range notification received on any Time based ACL rule. The hm2AgentAclTrapRuleTimeRangeName denotes the time range name associated with the ACL rule, hm2AgentAclTrapRuleTimeRangeNotification indicates the type of notification received and hm2AgentAclTrapRuleInstallationStatus indicates the installation status of ACL rule in the hardware. When activate notification is received, ACL rule is activated in the hardware. When deactivate notifcation is received, ACL rule is deactivated in the hardware. When delete notification is received, ACL rule is activated in the hardware, if it is not already activated. ACL trap generation requires the hm2AgentAclTrapFlag object to be set to enable(1).
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hm2AgentAclTrapRuleLogEventV1		1.3.6.1.4.1.248.12.3.2.0.248
This trap is generated on a periodic basis to indicate that an ACL rule configured for logging was actively used by hardware to take action on one or more packets. The hm2AgentAclTrapRuleHitCount denotes the number of packets that matched this rule during the most recent logging interval. ACL trap generation requires that the hm2AgentAclTrapFlag object is set to enable(1). This version of the trap is only sent when device uses SNMPv1 style traps. Devices using SNMPv2 and above send hm2AgentAclTrapRuleLogeEvent instead.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hm2AgentAclVlanTable		1.3.6.1.4.1.248.12.3.2.13
A table of ACL VLAN instances per direction.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hm2AgentAclVlanEntry

hm2AgentAclVlanEntry		1.3.6.1.4.1.248.12.3.2.13.1
An ACL VLAN table entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	Hm2AgentAclVlanEntry

hm2AgentAclVlanIndex		1.3.6.1.4.1.248.12.3.2.13.1.1
The VLAN to which this ACL instance applies.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..2147483647

hm2AgentAclVlanDirection		1.3.6.1.4.1.248.12.3.2.13.1.2
The VLAN direction to which this ACL instance applies.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	inbound(1), outbound(2)

hm2AgentAclVlanSequence		1.3.6.1.4.1.248.12.3.2.13.1.3
The relative evaluation sequence of this ACL for this VLAN and direction. When multiple ACLs are allowed for a given VLAN and direction, the sequence number determines the order in which the list of ACLs are evaluated, with lower sequence numbers given higher precedence. The sequence number value is arbitrary, but must be an unique non-zero value for a given VLAN and direction. Setting this object to an existing sequence number value for a given VLAN and direction causes the ACL corresponding to that value to be replaced with this ACL.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..4294967295

hm2AgentAclVlanAclType		1.3.6.1.4.1.248.12.3.2.13.1.4
The type of this ACL, which is used to interpret the hm2AgentAclVlanId object value. Each type of ACL uses its own numbering scheme for identification (see hm2AgentAclVlanAclId object for details). The hm2AgentAclVlanAclId object must be specified along with this object.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	ip(1), mac(2), ipv6(3)

hm2AgentAclVlanAclId		1.3.6.1.4.1.248.12.3.2.13.1.5
The ACL identifier value, which is interpreted based on the hm2AgentAclVlanType object. For the IP ACLs, the actual ACL number is its identifier as follows: IP standard ranges from 1-99, while IP extended ranges from 100-199. Here, hm2AgentAclVlanAclId represents hm2AgentAclIndex. The MAC ACLs use an internally generated index value that is assigned when the ACL is created. Here, hm2AgentAclVlanAclId represents hm2AgentAclMacIndex. The IPv6 ACLs use an internally generated index value that is assigned when the ACL is created. Here, hm2AgentAclVlanAclId represents hm2AgentAclIpv6Index. The hm2AgentAclVlanType object must be specified along with this object.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..2147483647

hm2AgentAclVlanStatus		1.3.6.1.4.1.248.12.3.2.13.1.6
Status of this instance. active(1) - this ACL VLAN instance is active createAndGo(4) - set to this value to assign an ACL to a VLAN and direction destroy(6) - set to this value to remove an ACL from a VLAN and direction
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hm2AgentOperatorRuleAssignOutboundInvalid		1.3.6.1.4.1.248.12.3.2.248
IP ACL rule with 'greater than', 'lower than', 'not equal' operators cannot be assigned to an interface in outbound direction.
Status: current	Access: read-create
OBJECT-IDENTITY