HM2-L2FORWARDING-MIB

File: HM2-L2FORWARDING-MIB.mib (6783 bytes)

Imported modules

SNMPv2-SMI HM2-TC-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Unsigned32
Integer32 hm2ConfigurationMibs HmEnabledStatus

Defined Types

Hm2TrafficClassEntry  
SEQUENCE    
  hm2TrafficClassPriority Integer32
  hm2TrafficClass Integer32

Hm2CosMapIpDscpEntry  
SEQUENCE    
  hm2CosMapIpDscpValue Unsigned32
  hm2CosMapIpDscpTrafficClass Unsigned32

Defined Values

hm2L2ForwardingMib 1.3.6.1.4.1.248.11.30
Hirschmann L2 Forwarding MIB. Copyright (C) 2011. All Rights Reserved.
MODULE-IDENTITY    

hm2L2ForwardingMibNotifications 1.3.6.1.4.1.248.11.30.0
OBJECT IDENTIFIER    

hm2L2ForwardingMibObjects 1.3.6.1.4.1.248.11.30.1
OBJECT IDENTIFIER    

hm2L2ForwGeneralGroup 1.3.6.1.4.1.248.11.30.1.1
OBJECT IDENTIFIER    

hm2L2ForwClassOfServiceGroup 1.3.6.1.4.1.248.11.30.1.2
OBJECT IDENTIFIER    

hm2L2VlanUnawareModeAdminStatus 1.3.6.1.4.1.248.11.30.1.1.1
Enables or disables VLAN unaware mode for the switch unit.
Status: current Access: read-write
OBJECT-TYPE    
  HmEnabledStatus  

hm2L2VlanUnawareModeOperStatus 1.3.6.1.4.1.248.11.30.1.1.2
Shows if VLAN unaware mode for the switch unit is enables or disables.
Status: current Access: read-only
OBJECT-TYPE    
  HmEnabledStatus  

hm2TrafficClassTable 1.3.6.1.4.1.248.11.30.1.2.1
A table mapping evaluated User Priority to Traffic Class, for forwarding by the bridge. Traffic class is a number in the range (0..(dot1dPortNumTrafficClasses-1)).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hm2TrafficClassEntry

hm2TrafficClassEntry 1.3.6.1.4.1.248.11.30.1.2.1.1
User Priority to Traffic Class mapping.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hm2TrafficClassEntry  

hm2TrafficClassPriority 1.3.6.1.4.1.248.11.30.1.2.1.1.1
The Priority value determined for the received frame. This value is equivalent to the priority indicated in the tagged frame received, or one of the evaluated priorities, determined according to the media-type. For untagged frames received from Ethernet media, this value is equal to the dot1dPortDefaultUserPriority value for the ingress port.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..7  

hm2TrafficClass 1.3.6.1.4.1.248.11.30.1.2.1.1.2
The Traffic Class the received frame is mapped to.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

hm2CosMapIpDscpTable 1.3.6.1.4.1.248.11.30.1.2.2
A table mapping evaluated IP DSCP to Traffic Class for a specific physical port. Traffic class is a number in the range (0..(dot1dPortNumTrafficClasses-1)).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hm2CosMapIpDscpEntry

hm2CosMapIpDscpEntry 1.3.6.1.4.1.248.11.30.1.2.2.1
IP DSCP to Traffic Class mapping for a port.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hm2CosMapIpDscpEntry  

hm2CosMapIpDscpValue 1.3.6.1.4.1.248.11.30.1.2.2.1.1
The IP DSCP value contained in the received frame. This value is only indicated in IP packets, but is independent of both media-type and frame tagging. Non-IP packets are handled in accordance with the dot1dPortDefaultUserPriority value of the ingress port.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..63  

hm2CosMapIpDscpTrafficClass 1.3.6.1.4.1.248.11.30.1.2.2.1.2
Traffic class priority queue the received frame is mapped to.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7