GALILEO-MIB

Imported modules

SNMPv2-SMI	IF-MIB	Q-BRIDGE-MIB
RADLAN-MIB	SNMPv2-TC

Imported symbols

IpAddress	InterfaceIndexOrZero	InterfaceIndex
PortList	rlGalileo	TEXTUAL-CONVENTION
DisplayString	TruthValue	RowStatus

Defined Types

RlPolicyGalileoDebugGroupType
Specifies one of 3 types for which offset bytes can be specified. For Ip,bridge and Ipx
TEXTUAL-CONVENTION
	INTEGER	bridged(1), routedIp(2), routedIpx(3)

RlPolicyGalileoDebugFcogEntry
SEQUENCE
	rlPolicyGalileoDebugFcogType	RlPolicyGalileoDebugGroupType
	rlPolicyGalileoDebugL2SrcAddr	TruthValue
	rlPolicyGalileoDebugL2DstAddr	TruthValue
	rlPolicyGalileoDebugVlanId	TruthValue
	rlPolicyGalileoDebugInport	TruthValue
	rlPolicyGalileoDebugIpxDstNet	TruthValue
	rlPolicyGalileoDebugIpxDstNode	TruthValue
	rlPolicyGalileoDebugIpSrcAddr	TruthValue
	rlPolicyGalileoDebugIpDstAddr	TruthValue
	rlPolicyGalileoDebugIpProtocol	TruthValue
	rlPolicyGalileoDebugIpSrcPort	TruthValue
	rlPolicyGalileoDebugIpDstPort	TruthValue
	rlPolicyGalileoDebugStatus	RowStatus

RlPolicyGalileoDebugFlowTableEntry
SEQUENCE
	rlPolicyGalileoDebugFlowType	RlPolicyGalileoDebugGroupType
	rlPolicyGalileoDebugFlowRxIfIndex	INTEGER
	rlPolicyGalileoDebugFlowL2SrcAddr	OCTET STRING
	rlPolicyGalileoDebugFlowL2DstAddr	OCTET STRING
	rlPolicyGalileoDebugFlowVlanId	INTEGER
	rlPolicyGalileoDebugFlowIpxDstNet	OCTET STRING
	rlPolicyGalileoDebugFlowIpxDstNode	OCTET STRING
	rlPolicyGalileoDebugFlowIpSrcAddr	OCTET STRING
	rlPolicyGalileoDebugFlowIpDstAddr	OCTET STRING
	rlPolicyGalileoDebugFlowIpProtocol	INTEGER
	rlPolicyGalileoDebugFlowIpSrcPort	OCTET STRING
	rlPolicyGalileoDebugFlowIpDstPort	OCTET STRING
	rlPolicyGalileoDebugFlowRetValid	TruthValue
	rlPolicyGalileoDebugFlowRetStatic	TruthValue
	rlPolicyGalileoDebugFlowRetAging	TruthValue
	rlPolicyGalileoDebugFlowRetCmd	INTEGER
	rlPolicyGalileoDebugFlowRetPrio	INTEGER
	rlPolicyGalileoDebugFlowRetInProfileDis	INTEGER
	rlPolicyGalileoDebugFlowRetVpt	INTEGER
	rlPolicyGalileoDebugFlowRetChangeTos	TruthValue
	rlPolicyGalileoDebugFlowRetNewTos	INTEGER
	rlPolicyGalileoDebugFlowRetVlanId	INTEGER
	rlPolicyGalileoDebugFlowRetInIfIndex	INTEGER
	rlPolicyGalileoDebugFlowRetEnableMeter	TruthValue
	rlPolicyGalileoDebugFlowRetOutProfileDis	INTEGER

RlPolicySimpleGalMibProfileType
Specifies one of 4 services the device can support
TEXTUAL-CONVENTION
	INTEGER	minBandwidth(1), bandwidthGuarantee(2), minDelay(3), minDelayPerSession(4)

RlPolicySimpleGalMibPortType
Specifies the port type
TEXTUAL-CONVENTION
	INTEGER	boundary(1), interior(2)

RlPolicySimpleGalMibProfileEntry
SEQUENCE
	rlPolicySimpleGalMibIndex	INTEGER
	rlPolicySimpleGalMibDescription	DisplayString
	rlPolicySimpleGalMibProfileType	RlPolicySimpleGalMibProfileType
	rlPolicySimpleGalMibRate	INTEGER
	rlPolicySimpleGalMibBurstSize	INTEGER
	rlPolicySimpleGalMibMaxSession	INTEGER
	rlPolicySimpleGalMibNewVpt	INTEGER
	rlPolicySimpleGalMibChangeTosOrDscp	TruthValue
	rlPolicySimpleGalMibNewTosOrDscp	INTEGER
	rlPolicySimpleGalMibStatus	RowStatus

RlPolicySimpleGalMibIpFcogEntry
SEQUENCE
	rlPolicySimpleGalMibIpFcogPortType	RlPolicySimpleGalMibPortType
	rlPolicySimpleGalMibIpFcogTosOrDscp	TruthValue
	rlPolicySimpleGalMibIpFcogProtocol	TruthValue
	rlPolicySimpleGalMibIpFcogSrcIpMask	INTEGER
	rlPolicySimpleGalMibIpFcogDstIpMask	INTEGER
	rlPolicySimpleGalMibIpFcogSrcPort	TruthValue
	rlPolicySimpleGalMibIpFcogDstPort	TruthValue
	rlPolicySimpleGalMibIpFcogInIfIndex	TruthValue

RlPolicySimpleGalMibIpRulesEntry
SEQUENCE
	rlPolicySimpleGalMibIpRulesPortType	RlPolicySimpleGalMibPortType
	rlPolicySimpleGalMibIpRulesIndex	INTEGER
	rlPolicySimpleGalMibIpRulesDescription	DisplayString
	rlPolicySimpleGalMibIpRulesTosOrDscp	INTEGER
	rlPolicySimpleGalMibIpRulesProtocol	INTEGER
	rlPolicySimpleGalMibIpRulesSrcIp	IpAddress
	rlPolicySimpleGalMibIpRulesSrcIpMask	INTEGER
	rlPolicySimpleGalMibIpRulesDstIp	IpAddress
	rlPolicySimpleGalMibIpRulesDstIpMask	INTEGER
	rlPolicySimpleGalMibIpRulesSrcPort	INTEGER
	rlPolicySimpleGalMibIpRulesDstPort	INTEGER
	rlPolicySimpleGalMibIpRulesInIfIndexList	PortList
	rlPolicySimpleGalMibIpRulesCondition	INTEGER
	rlPolicySimpleGalMibIpRulesAction	INTEGER
	rlPolicySimpleGalMibIpRulesProfilePointer	INTEGER
	rlPolicySimpleGalMibIpRulesOutIfIndexList	PortList
	rlPolicySimpleGalMibIpRulesBitsUsed	OCTET STRING
	rlPolicySimpleGalMibIpRulesErrorDescrip	DisplayString
	rlPolicySimpleGalMibIpRulesStatus	RowStatus

RlPolicySimpleGalMibIpxFcogEntry
SEQUENCE
	rlPolicySimpleGalMibIpxFcogIndex	INTEGER
	rlPolicySimpleGalMibIpxFcogDstNet	OCTET STRING
	rlPolicySimpleGalMibIpxFcogDstNode	OCTET STRING
	rlPolicySimpleGalMibIpxFcogDstSocket	TruthValue
	rlPolicySimpleGalMibIpxFcogSrcNet	OCTET STRING
	rlPolicySimpleGalMibIpxFcogSrcNode	OCTET STRING
	rlPolicySimpleGalMibIpxFcogSrcSocket	TruthValue
	rlPolicySimpleGalMibIpxFcogInIfIndex	TruthValue

RlPolicySimpleGalMibIpxRulesEntry
SEQUENCE
	rlPolicySimpleGalMibIpxRulesIndex	INTEGER
	rlPolicySimpleGalMibIpxRulesDescription	DisplayString
	rlPolicySimpleGalMibIpxRulesDstNet	OCTET STRING
	rlPolicySimpleGalMibIpxRulesDstNode	OCTET STRING
	rlPolicySimpleGalMibIpxRulesDstSocket	INTEGER
	rlPolicySimpleGalMibIpxRulesSrcNet	OCTET STRING
	rlPolicySimpleGalMibIpxRulesSrcNode	OCTET STRING
	rlPolicySimpleGalMibIpxRulesSrcSocket	INTEGER
	rlPolicySimpleGalMibIpxRulesInIfIndexList	PortList
	rlPolicySimpleGalMibIpxRulesCondition	INTEGER
	rlPolicySimpleGalMibIpxRulesAction	INTEGER
	rlPolicySimpleGalMibIpxRulesProfilePointer	INTEGER
	rlPolicySimpleGalMibIpxRulesOutIfIndexList	PortList
	rlPolicySimpleGalMibIpxRulesStatus	RowStatus

RlPolicySimpleGalMibBridgeFcogEntry
SEQUENCE
	rlPolicySimpleGalMibBridgeFcogIndex	INTEGER
	rlPolicySimpleGalMibBridgeFcogDstMac	OCTET STRING
	rlPolicySimpleGalMibBridgeFcogSrcMac	OCTET STRING
	rlPolicySimpleGalMibBridgeFcogVid	TruthValue
	rlPolicySimpleGalMibBridgeFcogInIfIndex	TruthValue
	rlPolicySimpleGalMibBridgeFcogEthType	TruthValue
	rlPolicySimpleGalMibBridgeFcogIpTosOrDscp	TruthValue
	rlPolicySimpleGalMibBridgeFcogIpProtocol	TruthValue
	rlPolicySimpleGalMibBridgeFcogIpSrcIpMask	INTEGER
	rlPolicySimpleGalMibBridgeFcogIpDstIpMask	INTEGER
	rlPolicySimpleGalMibBridgeFcogIpSrcPort	TruthValue
	rlPolicySimpleGalMibBridgeFcogIpDstPort	TruthValue

RlPolicySimpleGalMibBridgeRulesEntry
SEQUENCE
	rlPolicySimpleGalMibBridgeRulesIndex	INTEGER
	rlPolicySimpleGalMibBridgeRulesDescription	DisplayString
	rlPolicySimpleGalMibBridgeRulesDstMac	OCTET STRING
	rlPolicySimpleGalMibBridgeRulesSrcMac	OCTET STRING
	rlPolicySimpleGalMibBridgeRulesVid	INTEGER
	rlPolicySimpleGalMibBridgeRulesInIfIndexList	PortList
	rlPolicySimpleGalMibBridgeRulesEthType	INTEGER
	rlPolicySimpleGalMibBridgeRulesIpTosOrDscp	INTEGER
	rlPolicySimpleGalMibBridgeRulesIpProtocol	INTEGER
	rlPolicySimpleGalMibBridgeRulesIpSrcIp	IpAddress
	rlPolicySimpleGalMibBridgeRulesIpDstIp	IpAddress
	rlPolicySimpleGalMibBridgeRulesIpSrcPort	INTEGER
	rlPolicySimpleGalMibBridgeRulesIpDstPort	INTEGER
	rlPolicySimpleGalMibBridgeRulesCondition	INTEGER
	rlPolicySimpleGalMibBridgeRulesAction	INTEGER
	rlPolicySimpleGalMibBridgeRulesProfilePointer	INTEGER
	rlPolicySimpleGalMibBridgeRulesOutIfIndexList	PortList
	rlPolicySimpleGalMibBridgeRulesStatus	RowStatus

RlPolicySimpleGalMibPortEntry
SEQUENCE
	rlPolicySimpleGalMibPortIfIndex	INTEGER
	rlPolicySimpleGalMibPortType	RlPolicySimpleGalMibPortType

Defined Values

rlGalMibVersion		1.3.6.1.4.1.89.56.1
MIB's version, the current version is 1.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rlGalMode		1.3.6.1.4.1.89.56.2
Current mode supported by the device.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	base(1), extended(2)

rlGalModeAfterReset		1.3.6.1.4.1.89.56.3
New mode supported by the device after the next reset.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	base(1), extended(2)

rlPolicyGalileoDebugTuning		1.3.6.1.4.1.89.56.4
OBJECT IDENTIFIER

rlPolicyGalileoTuningOverProvisioning		1.3.6.1.4.1.89.56.4.1
For non-quantitative flows: Defines the function that is used to devide the aggregate rate (dependent on the number of flows using the specific meterId). The options for this mib variables are: - overProvisioning is 1/n -> may cause severe exceeding from permitted bw. - minorOverProvisioning is 1/(n+1)-> may cause minor exceeding from permitted bw. - underProvisioning is 1/(2^n) -> usaully causes to be under the permitted bw. where n is the number of flows using the specific meterId, initial value = 1.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	overProvisioning(1), minorOverProvisioning(2), underProvisioning(3)

rlPolicyGalileoTuningExtremConditionBurstSize		1.3.6.1.4.1.89.56.4.2
This variable indicates the value of a new burst size, when the given aggregate burst size has reached the following extreme condition: (aggregateBurstSize/n) < 1536 (smaller than max MTU). The options for this mib variables are: - new burst = 0 bytes - new burst = 1536 bytes where n is the number of flows using the specific meterId.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	zero(1), maxMtu(2)

rlPolicyGalileoTuningOverrideOutOfProfileDropPrecedence		1.3.6.1.4.1.89.56.4.3
This mib variable is used only when the rlPolicyGalileoTuningExtremConditionBurstSize is 0 bytes. The options for this mib variables are: - TRUE => out of profile Drop Precedence = High Drop Precedence. This value will override the rule's out of profile Drop Precedence. - FALSE => out of profile Drop Precedence is set according to the rule's decision.
Status: mandatory	Access: read-write
OBJECT-TYPE
	TruthValue

rlCosFftAgingTimeout		1.3.6.1.4.1.89.56.5
The aging timeout of the CoS FFT Tables.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rlCosFftPollingInterval		1.3.6.1.4.1.89.56.6
The polling interval for dynamic CoS FFTs support in seconds.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rlPolicyGalileoDebug		1.3.6.1.4.1.89.56.7
OBJECT IDENTIFIER

rlPolicyGalileoDebugFcogTable		1.3.6.1.4.1.89.56.7.1
Indecate the instance of the fcog for hash_fnc calc per group type
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RlPolicyGalileoDebugFcogEntry

rlPolicyGalileoDebugFcogEntry		1.3.6.1.4.1.89.56.7.1.1
the entry per groupType indicate the offsets for hash_func calc.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RlPolicyGalileoDebugFcogEntry

rlPolicyGalileoDebugFcogType		1.3.6.1.4.1.89.56.7.1.1.1
Specifies a the Group type for which Fcog bytes specified.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RlPolicyGalileoDebugGroupType

rlPolicyGalileoDebugL2SrcAddr		1.3.6.1.4.1.89.56.7.1.1.2
indecate if the L2 SrcAddr defined for fcog.
Status: mandatory	Access: read-write
OBJECT-TYPE
	TruthValue

rlPolicyGalileoDebugL2DstAddr		1.3.6.1.4.1.89.56.7.1.1.3
indecate if the L2DstAddr defined for fcog.
Status: mandatory	Access: read-write
OBJECT-TYPE
	TruthValue

rlPolicyGalileoDebugVlanId		1.3.6.1.4.1.89.56.7.1.1.4
indecate if the VlanId defined for fcog.
Status: mandatory	Access: read-write
OBJECT-TYPE
	TruthValue

rlPolicyGalileoDebugInport		1.3.6.1.4.1.89.56.7.1.1.5
indecate if the Inport defined for fcog.
Status: mandatory	Access: read-write
OBJECT-TYPE
	TruthValue

rlPolicyGalileoDebugIpxDstNet		1.3.6.1.4.1.89.56.7.1.1.6
indecate if the IpxDstNet defined for fcog.
Status: mandatory	Access: read-write
OBJECT-TYPE
	TruthValue

rlPolicyGalileoDebugIpxDstNode		1.3.6.1.4.1.89.56.7.1.1.7
indecate if the IpxDstNode defined for fcog.
Status: mandatory	Access: read-write
OBJECT-TYPE
	TruthValue

rlPolicyGalileoDebugIpSrcAddr		1.3.6.1.4.1.89.56.7.1.1.8
indecate if the IpSrcAddr defined for fcog.
Status: mandatory	Access: read-write
OBJECT-TYPE
	TruthValue

rlPolicyGalileoDebugIpDstAddr		1.3.6.1.4.1.89.56.7.1.1.9
indecate if the IpDstAddr defined for fcog.
Status: mandatory	Access: read-write
OBJECT-TYPE
	TruthValue

rlPolicyGalileoDebugIpProtocol		1.3.6.1.4.1.89.56.7.1.1.10
indecate if the IpProtocol defined for fcog.
Status: mandatory	Access: read-write
OBJECT-TYPE
	TruthValue

rlPolicyGalileoDebugIpSrcPort		1.3.6.1.4.1.89.56.7.1.1.11
indecate if the IpSrcPort defined for fcog.
Status: mandatory	Access: read-write
OBJECT-TYPE
	TruthValue

rlPolicyGalileoDebugIpDstPort		1.3.6.1.4.1.89.56.7.1.1.12
indecate if the IpDstPort defined for fcog.
Status: mandatory	Access: read-write
OBJECT-TYPE
	TruthValue

rlPolicyGalileoDebugStatus		1.3.6.1.4.1.89.56.7.1.1.13
The status of a table entry. It is used to delete an entry from this table.
Status: mandatory	Access: read-write
OBJECT-TYPE
	RowStatus

rlPolicyGalileoDebugFlowTable		1.3.6.1.4.1.89.56.7.2
This table will allow us to request variables from specific entry at the flowTable. only get and getNext will be supported (getNext will return alyaws EndOfMibTable)
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RlPolicyGalileoDebugFlowTableEntry

rlPolicyGalileoDebugFlowTableEntry		1.3.6.1.4.1.89.56.7.2.1
all the input fileds has a default val except from the groupType, request of an entry should be based on the fcog definition.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RlPolicyGalileoDebugFlowTableEntry

rlPolicyGalileoDebugFlowType		1.3.6.1.4.1.89.56.7.2.1.1
Specifies a the Group type.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RlPolicyGalileoDebugGroupType

rlPolicyGalileoDebugFlowRxIfIndex		1.3.6.1.4.1.89.56.7.2.1.2
Specifies a the IfIndex the packet arrived (for the calculation of the relevant cosTable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rlPolicyGalileoDebugFlowL2SrcAddr		1.3.6.1.4.1.89.56.7.2.1.3
Indicate the L2SrcAddr for the requsted entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..6)

rlPolicyGalileoDebugFlowL2DstAddr		1.3.6.1.4.1.89.56.7.2.1.4
Indicate the L2DstAddr for the requsted entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..6)

rlPolicyGalileoDebugFlowVlanId		1.3.6.1.4.1.89.56.7.2.1.5
Indicate the VlanId for the requsted entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rlPolicyGalileoDebugFlowIpxDstNet		1.3.6.1.4.1.89.56.7.2.1.6
Indicate the IPX DstNet for the requsted entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..4)

rlPolicyGalileoDebugFlowIpxDstNode		1.3.6.1.4.1.89.56.7.2.1.7
Indicate the IPX DstNode for the requsted entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..6)

rlPolicyGalileoDebugFlowIpSrcAddr		1.3.6.1.4.1.89.56.7.2.1.8
Indicate the IP SrcAddr for the requsted entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..4)

rlPolicyGalileoDebugFlowIpDstAddr		1.3.6.1.4.1.89.56.7.2.1.9
Indicate the IP DstAddr for the requsted entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..4)

rlPolicyGalileoDebugFlowIpProtocol		1.3.6.1.4.1.89.56.7.2.1.10
Indicate the IP Protocol for the requsted entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rlPolicyGalileoDebugFlowIpSrcPort		1.3.6.1.4.1.89.56.7.2.1.11
Indicate the IP SrcPort for the requsted entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..2)

rlPolicyGalileoDebugFlowIpDstPort		1.3.6.1.4.1.89.56.7.2.1.12
Indicate the IP DstPort for the requsted entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..2)

rlPolicyGalileoDebugFlowRetValid		1.3.6.1.4.1.89.56.7.2.1.13
Indicate if the requsted entry is valid (exist) or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TruthValue

rlPolicyGalileoDebugFlowRetStatic		1.3.6.1.4.1.89.56.7.2.1.14
Indicate if the requsted entry is a static entry or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TruthValue

rlPolicyGalileoDebugFlowRetAging		1.3.6.1.4.1.89.56.7.2.1.15
Indicate if the Aging bit of the requested entry is set or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TruthValue

rlPolicyGalileoDebugFlowRetCmd		1.3.6.1.4.1.89.56.7.2.1.16
Indicate if the CMD of the requested entry .
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	drop(1), dropAndTrap(2), permit(3), permitAndTrap(4)

rlPolicyGalileoDebugFlowRetPrio		1.3.6.1.4.1.89.56.7.2.1.17
Indicate if the Pri/Sc of the requested entry .
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rlPolicyGalileoDebugFlowRetInProfileDis		1.3.6.1.4.1.89.56.7.2.1.18
Indicate if the inProfile Discardability of the requested entry .
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	low(1), high(2), drop(3)

rlPolicyGalileoDebugFlowRetVpt		1.3.6.1.4.1.89.56.7.2.1.19
Indicate if the Vpt of the requested entry .
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rlPolicyGalileoDebugFlowRetChangeTos		1.3.6.1.4.1.89.56.7.2.1.20
Indicate if the Change Tos of the requested entry is set or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TruthValue

rlPolicyGalileoDebugFlowRetNewTos		1.3.6.1.4.1.89.56.7.2.1.21
Indicate if the New Tos of the requested entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rlPolicyGalileoDebugFlowRetVlanId		1.3.6.1.4.1.89.56.7.2.1.22
Indicate if the VlanId of the requested entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rlPolicyGalileoDebugFlowRetInIfIndex		1.3.6.1.4.1.89.56.7.2.1.23
Indicate if the InIfindex of the requested entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rlPolicyGalileoDebugFlowRetEnableMeter		1.3.6.1.4.1.89.56.7.2.1.24
Indicate if Meter of the requested entry is enbled or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TruthValue

rlPolicyGalileoDebugFlowRetOutProfileDis		1.3.6.1.4.1.89.56.7.2.1.25
Indicate the outProfile Discardability of the requested entry .
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	low(1), high(2), drop(3)

rlPolicyGalileoFcuFwdCpuCounter		1.3.6.1.4.1.89.56.8
Count the number of packets that forward from the Flow Classification Unit to the CPU
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rlPolicySimpleGalMib		1.3.6.1.4.1.89.56.9
OBJECT IDENTIFIER

rlPolicySimpleGalMibVersion		1.3.6.1.4.1.89.56.9.1
MIB's version, the current version is 1.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rlPolicySimpleGalMibPortTypeSupport		1.3.6.1.4.1.89.56.9.2
return a bit mask that indicates the supported port type: ---------- \|87654321\| ---------- 1 - BoundaryType 2 - InteriorType
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1)

rlPolicySimpleGalMibRecalculateRules		1.3.6.1.4.1.89.56.9.3
Setting any value will cause recalculation of all the rules.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	recalculate(1)

rlPolicySimpleGalMibPolicyEnable		1.3.6.1.4.1.89.56.9.4
Enables or disables the policy feature
Status: mandatory	Access: read-write
OBJECT-TYPE
	TruthValue

rlPolicySimpleGalMibProfileTable		1.3.6.1.4.1.89.56.9.5
The table defines all the profiles.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RlPolicySimpleGalMibProfileEntry

rlPolicySimpleGalMibProfileEntry		1.3.6.1.4.1.89.56.9.5.1
The entry define one profile.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RlPolicySimpleGalMibProfileEntry

rlPolicySimpleGalMibIndex		1.3.6.1.4.1.89.56.9.5.1.1
This enumerates the table entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

rlPolicySimpleGalMibDescription		1.3.6.1.4.1.89.56.9.5.1.2
Informational text given by the user to describe the profile.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..40)

rlPolicySimpleGalMibProfileType		1.3.6.1.4.1.89.56.9.5.1.3
Specifies a profile type.
Status: mandatory	Access: read-write
OBJECT-TYPE
	RlPolicySimpleGalMibProfileType

rlPolicySimpleGalMibRate		1.3.6.1.4.1.89.56.9.5.1.4
The rate in kilobytes/second for the specified profile, or in the case of minDelay per session profile type the rate will indicate the rate per individual session
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..2147483647

rlPolicySimpleGalMibBurstSize		1.3.6.1.4.1.89.56.9.5.1.5
The burst size parameter. A value of 0 means that the device should choose the Burst Size that is most suitable for the profile.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..2147483647

rlPolicySimpleGalMibMaxSession		1.3.6.1.4.1.89.56.9.5.1.6
Relevant only for the minDelay per session. Indicate the maximum number of sessions for this profile.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..2147483647

rlPolicySimpleGalMibNewVpt		1.3.6.1.4.1.89.56.9.5.1.7
Indicates the new VPT to assign to the packet.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..7

rlPolicySimpleGalMibChangeTosOrDscp		1.3.6.1.4.1.89.56.9.5.1.8
Indicates whether the TOS or DSCP should be remarked with a new value
Status: mandatory	Access: read-write
OBJECT-TYPE
	TruthValue

rlPolicySimpleGalMibNewTosOrDscp		1.3.6.1.4.1.89.56.9.5.1.9
Indicates the new value for the TOS or DSCP. Relevant only if rlPolicySimpleGalMibChangeTosOrDscp is true.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..255

rlPolicySimpleGalMibStatus		1.3.6.1.4.1.89.56.9.5.1.10
The status of a table entry. It is used to delete an entry from this table.
Status: mandatory	Access: read-write
OBJECT-TYPE
	RowStatus

rlPolicySimpleGalMibIpFcogTable		1.3.6.1.4.1.89.56.9.6
This table defines the used fields for ip classification, per port type (interior/boundary)
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RlPolicySimpleGalMibIpFcogEntry

rlPolicySimpleGalMibIpFcogEntry		1.3.6.1.4.1.89.56.9.6.1
the entry define the used fields for classification
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RlPolicySimpleGalMibIpFcogEntry

rlPolicySimpleGalMibIpFcogPortType		1.3.6.1.4.1.89.56.9.6.1.1
The port type (interior/boundary) to which this entry applies.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RlPolicySimpleGalMibPortType

rlPolicySimpleGalMibIpFcogTosOrDscp		1.3.6.1.4.1.89.56.9.6.1.2
Indicates whether the IP TOS or DSCP field will be used in classifiers or not.
Status: mandatory	Access: read-write
OBJECT-TYPE
	TruthValue

rlPolicySimpleGalMibIpFcogProtocol		1.3.6.1.4.1.89.56.9.6.1.3
Indicates whether the IP L4 protocol field will be used in classifiers or not.
Status: mandatory	Access: read-write
OBJECT-TYPE
	TruthValue

rlPolicySimpleGalMibIpFcogSrcIpMask		1.3.6.1.4.1.89.56.9.6.1.4
Indicates the number of most significant bits of the Ip Address that are used in specifying IP source addresses in classifiers.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..32

rlPolicySimpleGalMibIpFcogDstIpMask		1.3.6.1.4.1.89.56.9.6.1.5
Indicates the number of most significant bits of the Ip Address that are used in specifying IP destination addresses in classifiers.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..32

rlPolicySimpleGalMibIpFcogSrcPort		1.3.6.1.4.1.89.56.9.6.1.6
Indicates whether the IP L4 protocol source port field will be used in classifiers or not.
Status: mandatory	Access: read-write
OBJECT-TYPE
	TruthValue

rlPolicySimpleGalMibIpFcogDstPort		1.3.6.1.4.1.89.56.9.6.1.7
Indicates whether the IP L4 protocol destination port field will be used in classifiers or not.
Status: mandatory	Access: read-write
OBJECT-TYPE
	TruthValue

rlPolicySimpleGalMibIpFcogInIfIndex		1.3.6.1.4.1.89.56.9.6.1.8
Indicates whether ifIndex of input ports will be used in classifiers or not.
Status: mandatory	Access: read-write
OBJECT-TYPE
	TruthValue

rlPolicySimpleGalMibIpRulesTable		1.3.6.1.4.1.89.56.9.7
This table contains the policy rules defined by the user. The order of the entries in the table is important, since the first rule that applies to the incoming packet will be acted upon, ignoring any further rules that may apply as well.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RlPolicySimpleGalMibIpRulesEntry

rlPolicySimpleGalMibIpRulesEntry		1.3.6.1.4.1.89.56.9.7.1
This entry defines one policy rule.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RlPolicySimpleGalMibIpRulesEntry

rlPolicySimpleGalMibIpRulesPortType		1.3.6.1.4.1.89.56.9.7.1.1
The port type (interior/boundary) to which this rule applies.
Status: mandatory	Access: read-only
OBJECT-TYPE
	RlPolicySimpleGalMibPortType

rlPolicySimpleGalMibIpRulesIndex		1.3.6.1.4.1.89.56.9.7.1.2
This enumerates the table. The user should assign indices in such a way that there will be a gap big enough between one rule and the next to allow insertion of additional rules in between (a gap of 1000 is recommended).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

rlPolicySimpleGalMibIpRulesDescription		1.3.6.1.4.1.89.56.9.7.1.3
Informational text given by the user to describe the rule.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..40)

rlPolicySimpleGalMibIpRulesTosOrDscp		1.3.6.1.4.1.89.56.9.7.1.4
Indicates the TOS or DSCP to compare with.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..255

rlPolicySimpleGalMibIpRulesProtocol		1.3.6.1.4.1.89.56.9.7.1.5
Indicates the L4 protocol to compare with.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..255

rlPolicySimpleGalMibIpRulesSrcIp		1.3.6.1.4.1.89.56.9.7.1.6
Indicates the source IP address to compare with.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

rlPolicySimpleGalMibIpRulesSrcIpMask		1.3.6.1.4.1.89.56.9.7.1.7
Indicates the number of most significant bits of the Ip Address that are used in specifying IP source addresses in classifiers.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..32

rlPolicySimpleGalMibIpRulesDstIp		1.3.6.1.4.1.89.56.9.7.1.8
Indicates the destination IP address to compare with.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

rlPolicySimpleGalMibIpRulesDstIpMask		1.3.6.1.4.1.89.56.9.7.1.9
Indicates the number of most significant bits of the Ip Address that are used in specifying IP destination addresses in classifiers.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..32

rlPolicySimpleGalMibIpRulesSrcPort		1.3.6.1.4.1.89.56.9.7.1.10
Indicates the source L4 port to compare with.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

rlPolicySimpleGalMibIpRulesDstPort		1.3.6.1.4.1.89.56.9.7.1.11
Indicates the destination L4 port to compare with.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

rlPolicySimpleGalMibIpRulesInIfIndexList		1.3.6.1.4.1.89.56.9.7.1.12
Indicates the list of input ports to which this rule applies.
Status: mandatory	Access: read-write
OBJECT-TYPE
	PortList

rlPolicySimpleGalMibIpRulesCondition		1.3.6.1.4.1.89.56.9.7.1.13
Indicate the relation that should hold for each relevant field of the rule in comparison to the packet's field.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	equal(1), notEqual(2), bigger(3), smaller(4)

rlPolicySimpleGalMibIpRulesAction		1.3.6.1.4.1.89.56.9.7.1.14
Indicates the action to be performed if there is a match with the rule.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	block(1), blockAndTrap(2), permitAndTrap(3), permit(4)

rlPolicySimpleGalMibIpRulesProfilePointer		1.3.6.1.4.1.89.56.9.7.1.15
Indicates the profile attached to the rule. The value is the index in the profile table of the attached profile. Value 0 means that no profile is attached to the rule and is valid only in case of action block.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..2147483647

rlPolicySimpleGalMibIpRulesOutIfIndexList		1.3.6.1.4.1.89.56.9.7.1.16
Indicates the list of output ports to on which bandwidth should be allocated for this rule.
Status: mandatory	Access: read-write
OBJECT-TYPE
	PortList

rlPolicySimpleGalMibIpRulesBitsUsed		1.3.6.1.4.1.89.56.9.7.1.17
a bit mask that indicates the the used fields for the entry: (the implemention is identical to BITS implementation,from MSB to LSB) ---------- \|87654321\| ---------- 8 - tosOrDscp 7 - Protocol 6 - SrcIp 5 - DstIp 4 - SrcIpPort 3 - DstIpPort
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1)

rlPolicySimpleGalMibIpRulesErrorDescrip		1.3.6.1.4.1.89.56.9.7.1.18
A description error indicate the user about the specific error. The error can cause by one of the following reasons: 1. if the profile was asign to the rule could not be perform 2. if the operation of QoS portLock failed
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..20)

rlPolicySimpleGalMibIpRulesStatus		1.3.6.1.4.1.89.56.9.7.1.19
The status of a table entry. It is used to delete an entry from this table. notInService is used to disable an entry. notReady will be assigned by the device to indicate that the rule can not be active because some ports in the output ports list are not in a state allowing bandwidth allocation guarantee.
Status: mandatory	Access: read-write
OBJECT-TYPE
	RowStatus

rlPolicySimpleGalMibIpxFcogTable		1.3.6.1.4.1.89.56.9.8
This table defines the used fields for ipx classification
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RlPolicySimpleGalMibIpxFcogEntry

rlPolicySimpleGalMibIpxFcogEntry		1.3.6.1.4.1.89.56.9.8.1
the entry defines the used fields for classification
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RlPolicySimpleGalMibIpxFcogEntry

rlPolicySimpleGalMibIpxFcogIndex		1.3.6.1.4.1.89.56.9.8.1.1
the table index - only one entry exist
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1

rlPolicySimpleGalMibIpxFcogDstNet		1.3.6.1.4.1.89.56.9.8.1.2
Indicates the parts of the field in use in the rules
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..4)

rlPolicySimpleGalMibIpxFcogDstNode		1.3.6.1.4.1.89.56.9.8.1.3
Indicates the parts of the field in use in the rules
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..6)

rlPolicySimpleGalMibIpxFcogDstSocket		1.3.6.1.4.1.89.56.9.8.1.4
Indicates whether the field is in use in the rules
Status: mandatory	Access: read-write
OBJECT-TYPE
	TruthValue

rlPolicySimpleGalMibIpxFcogSrcNet		1.3.6.1.4.1.89.56.9.8.1.5
Indicates the parts of the field in use in the rules
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..4)

rlPolicySimpleGalMibIpxFcogSrcNode		1.3.6.1.4.1.89.56.9.8.1.6
Indicates the parts of the field in use in the rules
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..6)

rlPolicySimpleGalMibIpxFcogSrcSocket		1.3.6.1.4.1.89.56.9.8.1.7
Indicates whether the field is in use in the rules
Status: mandatory	Access: read-write
OBJECT-TYPE
	TruthValue

rlPolicySimpleGalMibIpxFcogInIfIndex		1.3.6.1.4.1.89.56.9.8.1.8
Indicates whether the field is in use in the rules
Status: mandatory	Access: read-write
OBJECT-TYPE
	TruthValue

rlPolicySimpleGalMibIpxRulesTable		1.3.6.1.4.1.89.56.9.9
This table contains the policy rules defined by the user. The order of the entries in the table is important, since the first rule that matches the incoming packet will be acted upon, ignoring any further rules that may match as well.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RlPolicySimpleGalMibIpxRulesEntry

rlPolicySimpleGalMibIpxRulesEntry		1.3.6.1.4.1.89.56.9.9.1
This entry defines one policy rule.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RlPolicySimpleGalMibIpxRulesEntry

rlPolicySimpleGalMibIpxRulesIndex		1.3.6.1.4.1.89.56.9.9.1.1
This enumerates the table. The user should assign indices in such a way that there will be a gap big enough between one rule and the next to allow insertion of additional rules in between (a gap of 1000 is recommended).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

rlPolicySimpleGalMibIpxRulesDescription		1.3.6.1.4.1.89.56.9.9.1.2
Informational text given by the user to describe the rule.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..40)

rlPolicySimpleGalMibIpxRulesDstNet		1.3.6.1.4.1.89.56.9.9.1.3
Indicate the ipxDst Net to compare to
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..4)

rlPolicySimpleGalMibIpxRulesDstNode		1.3.6.1.4.1.89.56.9.9.1.4
Indicate the ipxDstNode to compare to
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..6)

rlPolicySimpleGalMibIpxRulesDstSocket		1.3.6.1.4.1.89.56.9.9.1.5
Indicate the ipx DstSocket to compare to
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

rlPolicySimpleGalMibIpxRulesSrcNet		1.3.6.1.4.1.89.56.9.9.1.6
Indicate the ipxSrc Net to compare to
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..4)

rlPolicySimpleGalMibIpxRulesSrcNode		1.3.6.1.4.1.89.56.9.9.1.7
Indicate the ipxSrcNode to compare to
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..6)

rlPolicySimpleGalMibIpxRulesSrcSocket		1.3.6.1.4.1.89.56.9.9.1.8
Indicate the ipx SrcSocket to compare to
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

rlPolicySimpleGalMibIpxRulesInIfIndexList		1.3.6.1.4.1.89.56.9.9.1.9
Indicates the list of input ports to which this rule applies.
Status: mandatory	Access: read-write
OBJECT-TYPE
	PortList

rlPolicySimpleGalMibIpxRulesCondition		1.3.6.1.4.1.89.56.9.9.1.10
Indicate the relation that should hold for each relevant field of the rule in comparison to the packet's.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	equal(1), notEqual(2), bigger(3), smaller(4)

rlPolicySimpleGalMibIpxRulesAction		1.3.6.1.4.1.89.56.9.9.1.11
Indicates the action to be performed if the rule matches.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	block(1), blockAndTrap(2), permitAndTrap(3), permit(4)

rlPolicySimpleGalMibIpxRulesProfilePointer		1.3.6.1.4.1.89.56.9.9.1.12
Indicates the profile attached to the rule. The value is the index in the profile table of the attached profile. Value 0 means that no profile is attached to the rule and is valid only in case of action block.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..2147483647

rlPolicySimpleGalMibIpxRulesOutIfIndexList		1.3.6.1.4.1.89.56.9.9.1.13
Indicates the list of output ports on which bandwidth should be allocated for this rule.
Status: mandatory	Access: read-write
OBJECT-TYPE
	PortList

rlPolicySimpleGalMibIpxRulesStatus		1.3.6.1.4.1.89.56.9.9.1.14
The status of a table entry. It is used to delete an entry from this table. notInService is used to disable an entry. notReady will be assigned by the device to indicate that the rule can not be active because some ports in the output ports list are not in a state allowing bandwidth allocation guarantee.
Status: mandatory	Access: read-write
OBJECT-TYPE
	RowStatus

rlPolicySimpleGalMibBridgeFcogTable		1.3.6.1.4.1.89.56.9.10
The table defines the used fields for Bridge classification
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RlPolicySimpleGalMibBridgeFcogEntry

rlPolicySimpleGalMibBridgeFcogEntry		1.3.6.1.4.1.89.56.9.10.1
the entry defines the used fields for classification
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RlPolicySimpleGalMibBridgeFcogEntry

rlPolicySimpleGalMibBridgeFcogIndex		1.3.6.1.4.1.89.56.9.10.1.1
the table index - only one entry exist
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1

rlPolicySimpleGalMibBridgeFcogDstMac		1.3.6.1.4.1.89.56.9.10.1.2
Indicate the use of the field in the rules
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..6)

rlPolicySimpleGalMibBridgeFcogSrcMac		1.3.6.1.4.1.89.56.9.10.1.3
Indicate the use of the field in the rules
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..6)

rlPolicySimpleGalMibBridgeFcogVid		1.3.6.1.4.1.89.56.9.10.1.4
Indicate whether the field is in use in the rules
Status: mandatory	Access: read-write
OBJECT-TYPE
	TruthValue

rlPolicySimpleGalMibBridgeFcogInIfIndex		1.3.6.1.4.1.89.56.9.10.1.5
Indicate whether the field is in use in the rules
Status: mandatory	Access: read-write
OBJECT-TYPE
	TruthValue

rlPolicySimpleGalMibBridgeFcogEthType		1.3.6.1.4.1.89.56.9.10.1.6
Indicate whether the field is in use in the rules
Status: mandatory	Access: read-write
OBJECT-TYPE
	TruthValue

rlPolicySimpleGalMibBridgeFcogIpTosOrDscp		1.3.6.1.4.1.89.56.9.10.1.7
Indicate whether the field is in use in the rules
Status: mandatory	Access: read-write
OBJECT-TYPE
	TruthValue

rlPolicySimpleGalMibBridgeFcogIpProtocol		1.3.6.1.4.1.89.56.9.10.1.8
Indicate whether the field is in use in the rules
Status: mandatory	Access: read-write
OBJECT-TYPE
	TruthValue

rlPolicySimpleGalMibBridgeFcogIpSrcIpMask		1.3.6.1.4.1.89.56.9.10.1.9
Indicate the number of used bits of the Ip Address from the left
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..32

rlPolicySimpleGalMibBridgeFcogIpDstIpMask		1.3.6.1.4.1.89.56.9.10.1.10
Indicate the number of used bits of the Ip Address from the left
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..32

rlPolicySimpleGalMibBridgeFcogIpSrcPort		1.3.6.1.4.1.89.56.9.10.1.11
Indicate whether the field is in use in the rules
Status: mandatory	Access: read-write
OBJECT-TYPE
	TruthValue

rlPolicySimpleGalMibBridgeFcogIpDstPort		1.3.6.1.4.1.89.56.9.10.1.12
Indicate whether the field is in use in the rules
Status: mandatory	Access: read-write
OBJECT-TYPE
	TruthValue

rlPolicySimpleGalMibBridgeRulesTable		1.3.6.1.4.1.89.56.9.11
This table contains the policy rules defined by the user. The order of the entries in the table is important, since the first rule that applies to the incoming packet will be acted upon, ignoring any further rules that may apply as well.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RlPolicySimpleGalMibBridgeRulesEntry

rlPolicySimpleGalMibBridgeRulesEntry		1.3.6.1.4.1.89.56.9.11.1
This entry defines one policy rule.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RlPolicySimpleGalMibBridgeRulesEntry

rlPolicySimpleGalMibBridgeRulesIndex		1.3.6.1.4.1.89.56.9.11.1.1
This enumerates the table. The user should assign indices in such a way that there will be a gap big enough between one rule and the next to allow insertion of additional rules in between (a gap of 1000 is recommended).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

rlPolicySimpleGalMibBridgeRulesDescription		1.3.6.1.4.1.89.56.9.11.1.2
Informational text given by the user to describe the rule.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..40)

rlPolicySimpleGalMibBridgeRulesDstMac		1.3.6.1.4.1.89.56.9.11.1.3
Indicate the Dst mac to compare
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..6)

rlPolicySimpleGalMibBridgeRulesSrcMac		1.3.6.1.4.1.89.56.9.11.1.4
Indicate the source mac to compare
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..6)

rlPolicySimpleGalMibBridgeRulesVid		1.3.6.1.4.1.89.56.9.11.1.5
Indicate the vlanId to compare
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..4095

rlPolicySimpleGalMibBridgeRulesInIfIndexList		1.3.6.1.4.1.89.56.9.11.1.6
Indicates the list of input ports to which this rule applies.
Status: mandatory	Access: read-write
OBJECT-TYPE
	PortList

rlPolicySimpleGalMibBridgeRulesEthType		1.3.6.1.4.1.89.56.9.11.1.7
Indicate the Ethernet type of the packet
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

rlPolicySimpleGalMibBridgeRulesIpTosOrDscp		1.3.6.1.4.1.89.56.9.11.1.8
Indicates the tos or dscp to compare
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..255

rlPolicySimpleGalMibBridgeRulesIpProtocol		1.3.6.1.4.1.89.56.9.11.1.9
Indicates the protocol to compare
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..255

rlPolicySimpleGalMibBridgeRulesIpSrcIp		1.3.6.1.4.1.89.56.9.11.1.10
Indicate the srcIp to compare
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

rlPolicySimpleGalMibBridgeRulesIpDstIp		1.3.6.1.4.1.89.56.9.11.1.11
Indicate the DstIp to compare
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

rlPolicySimpleGalMibBridgeRulesIpSrcPort		1.3.6.1.4.1.89.56.9.11.1.12
Indicate the Src port to compare
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

rlPolicySimpleGalMibBridgeRulesIpDstPort		1.3.6.1.4.1.89.56.9.11.1.13
Indicate the Src port to compare
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

rlPolicySimpleGalMibBridgeRulesCondition		1.3.6.1.4.1.89.56.9.11.1.14
Indicate the relation that should hold for each relevant field of the rule in comparison to the packet's field.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	equal(1), notEqual(2), bigger(3), smaller(4)

rlPolicySimpleGalMibBridgeRulesAction		1.3.6.1.4.1.89.56.9.11.1.15
Indicates the action to be performed if there is a match with the rule.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	block(1), blockAndTrap(2), permitAndTrap(3), permit(4)

rlPolicySimpleGalMibBridgeRulesProfilePointer		1.3.6.1.4.1.89.56.9.11.1.16
Indicates the profile attached to the rule. The value is the index in the profile table of the attached profile. Value 0 means that no profile is attached to the rule and is valid only in case of action block.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..2147483647

rlPolicySimpleGalMibBridgeRulesOutIfIndexList		1.3.6.1.4.1.89.56.9.11.1.17
Indicates the list of output ports to on which bandwidth should be allocated for this rule.
Status: mandatory	Access: read-write
OBJECT-TYPE
	PortList

rlPolicySimpleGalMibBridgeRulesStatus		1.3.6.1.4.1.89.56.9.11.1.18
The status of a table entry. It is used to delete an entry from this table. notInService is used to disable an entry. notReady will be assigned by the device to indicate that the rule can not be active because some ports in the output ports list are not in a state allowing bandwidth allocation guarantee.
Status: mandatory	Access: read-write
OBJECT-TYPE
	RowStatus

rlPolicySimpleGalMibPortTable		1.3.6.1.4.1.89.56.9.12
The table defines all of the ports types
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RlPolicySimpleGalMibPortEntry

rlPolicySimpleGalMibPortEntry		1.3.6.1.4.1.89.56.9.12.1
An entry defines a port's type
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RlPolicySimpleGalMibPortEntry

rlPolicySimpleGalMibPortIfIndex		1.3.6.1.4.1.89.56.9.12.1.1
This enumerates the table entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

rlPolicySimpleGalMibPortType		1.3.6.1.4.1.89.56.9.12.1.2
Defines the port type
Status: mandatory	Access: read-write
OBJECT-TYPE
	RlPolicySimpleGalMibPortType

rlGalPolicyMode		1.3.6.1.4.1.89.56.10
Indicates whether the QoS is for: -All Bridged packets; or -All routed IP packets. The value cannot change after system init
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	bridged(1), routedIp(2)