G6-SFP-MIB

File: G6-SFP-MIB.mib (11289 bytes)

Imported modules

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	Integer32
Unsigned32	Counter32	enterprises
NOTIFICATION-TYPE	DisplayString	MacAddress
g6

Defined Types

ConfigEntry
SEQUENCE
	configIndex	INTEGER
	configLossOfSignalEvent	INTEGER
	configOpticalDeltaDetect	INTEGER
	configDeltaThreshold	Integer32

InformationEntry
SEQUENCE
	informationPortIndex	INTEGER
	informationPort	INTEGER
	informationLocation	DisplayString
	informationStatus	BITS
	informationType	INTEGER
	informationConnector	INTEGER
	informationWavelength	DisplayString
	informationTxTechnology	DisplayString
	informationRxTechnology	DisplayString
	informationNominalBitrate	DisplayString
	informationManufacturer	DisplayString
	informationPartNumber	DisplayString
	informationRevision	DisplayString
	informationSerialNumber	DisplayString
	informationMfgDateCode	DisplayString
	informationWarnings	BITS
	informationAlarms	BITS
	informationTxPower	DisplayString
	informationRxPower	DisplayString
	informationTemperature	DisplayString
	informationMaxLength9Um	DisplayString
	informationMaxLength50Um	DisplayString
	informationMaxLength62Um	DisplayString
	informationMaxLengthCopper	DisplayString
	informationTuningRange	DisplayString
	informationPowerConsumption	DisplayString
	informationAdditionalInformation	DisplayString

Defined Values

device		1.3.6.1.4.1.3181.10.6.1
Microsens private MIB for Generation 6 Ethernet Switches
MODULE-IDENTITY

sfp		1.3.6.1.4.1.3181.10.6.1.34
OBJECT IDENTIFIER

configTable		1.3.6.1.4.1.3181.10.6.1.34.1
These setting apply to each SFP in the system.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ConfigEntry

configEntry		1.3.6.1.4.1.3181.10.6.1.34.1.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	ConfigEntry

configIndex		1.3.6.1.4.1.3181.10.6.1.34.1.1.1
Automatically generated
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	0

configLossOfSignalEvent		1.3.6.1.4.1.3181.10.6.1.34.1.1.2
When enabled a loss of optical signal or the return of the signal will create an event.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

configOpticalDeltaDetect		1.3.6.1.4.1.3181.10.6.1.34.1.1.3
An optical receive power level change of more than delta_threshold between two successive read cycles generates an event.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

configDeltaThreshold		1.3.6.1.4.1.3181.10.6.1.34.1.1.4
Defines the dB difference required to trigger an event. Only 1 dB steps are permitted. A value of 0 detects any change. This setting is only for testing. Recommended value: 2.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..255

informationTable		1.3.6.1.4.1.3181.10.6.1.34.100
This table displays data which are read from the inserted SFPs.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		InformationEntry

informationEntry		1.3.6.1.4.1.3181.10.6.1.34.100.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	InformationEntry

informationPortIndex		1.3.6.1.4.1.3181.10.6.1.34.100.1.1
Automatically generated
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	0..47

informationPort		1.3.6.1.4.1.3181.10.6.1.34.100.1.2
Indicates the physical port in which this SFP is inserted.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

informationLocation		1.3.6.1.4.1.3181.10.6.1.34.100.1.3
Textual description of SFP location.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

informationStatus		1.3.6.1.4.1.3181.10.6.1.34.100.1.4
Should indicate OK. LOSS_OF_SIGNAL is shown when the optical receive power level is below the critical lower limit.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	ok(0), laserDisabled(1), lossOfSignal(2), txFailure(3), readError(4)

informationType		1.3.6.1.4.1.3181.10.6.1.34.100.1.5
This parameter shows which type of optics are installed
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	empty(0), unknown(1), sfp(2), gbic(3), sff(4), dwdmSfp(5), xfp(7), csfpA(8), csfpB(9), dwdmXfp(10), sfpPlus(11)

informationConnector		1.3.6.1.4.1.3181.10.6.1.34.100.1.6
Shows which connector is used with this SFP.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), lc(1), sc(2), mtRj(3), rj45(4), mu(5)

informationWavelength		1.3.6.1.4.1.3181.10.6.1.34.100.1.7
Nominal wavelength if this SFP. May also indicate ITU channel for DWDM optics.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

informationTxTechnology		1.3.6.1.4.1.3181.10.6.1.34.100.1.8
Distinguishes between multimode and single mode SFP. For DWDM SFP more details including grid are shown.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

informationRxTechnology		1.3.6.1.4.1.3181.10.6.1.34.100.1.9
Distinguishes between normal PIN receivers and more sensitive APD receivers.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

informationNominalBitrate		1.3.6.1.4.1.3181.10.6.1.34.100.1.10
Nominal bitrate rounded to nearest 100Mbit. Usually the SFP can be operated at lower speed as well.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

informationManufacturer		1.3.6.1.4.1.3181.10.6.1.34.100.1.11
Shows the manufacturer of this SFP.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

informationPartNumber		1.3.6.1.4.1.3181.10.6.1.34.100.1.12
Shows the part number of this SFP. This will differ from the MICROSENS order code unless also MICROSENS is indicated as manufacturer.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

informationRevision		1.3.6.1.4.1.3181.10.6.1.34.100.1.13
Internal revision code of this SFP.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

informationSerialNumber		1.3.6.1.4.1.3181.10.6.1.34.100.1.14
Serial number of the SFP.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

informationMfgDateCode		1.3.6.1.4.1.3181.10.6.1.34.100.1.15
Manufacturing date code.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

informationWarnings		1.3.6.1.4.1.3181.10.6.1.34.100.1.16
Tok_String
Status: current	Access: read-only
OBJECT-TYPE
	BITS	txPowerLow(0), txPowerHigh(1), txBiasLow(2), txBiasHigh(3), vccLow(4), vccHigh(5), tempLow(6), tempHigh(7), rxPowerLow(8), rxPowerHigh(9)

informationAlarms		1.3.6.1.4.1.3181.10.6.1.34.100.1.17
Tok_String
Status: current	Access: read-only
OBJECT-TYPE
	BITS	txPowerTooLow(0), txPowerTooHigh(1), txBiasTooLow(2), txBiasTooHigh(3), vccTooLow(4), vccTooHigh(5), tempTooLow(6), tempTooHigh(7), rxPowerTooLow(8), rxPowerTooHigh(9)

informationTxPower		1.3.6.1.4.1.3181.10.6.1.34.100.1.18
Indicates the optical output in dBm. Some SFP cannot display this value. For electrical SFP N/A (not applicable) is shown.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

informationRxPower		1.3.6.1.4.1.3181.10.6.1.34.100.1.19
Indicates the optical input in dBm. Some SFP cannot display this value. For electrical SFP N/A (not applicable) is shown.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

informationTemperature		1.3.6.1.4.1.3181.10.6.1.34.100.1.20
Displays the temperature inside the SFP. This is usually higher than the system temperature.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

informationMaxLength9Um		1.3.6.1.4.1.3181.10.6.1.34.100.1.21
Displays nominal maximum reach of this SFP on a standard single mode fiber.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

informationMaxLength50Um		1.3.6.1.4.1.3181.10.6.1.34.100.1.22
Displays nominal maximum reach of this SFP on a 50 micro meter multimode fiber.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

informationMaxLength62Um		1.3.6.1.4.1.3181.10.6.1.34.100.1.23
Displays nominal maximum reach of this SFP on a 62.5 micro meter multimode fiber.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

informationMaxLengthCopper		1.3.6.1.4.1.3181.10.6.1.34.100.1.24
Displays nominal maximum reach of this SFP on a copper cable. Only applies to electrical SFP.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

informationTuningRange		1.3.6.1.4.1.3181.10.6.1.34.100.1.25
For wavelength tunable optics additional details are shown here.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

informationPowerConsumption		1.3.6.1.4.1.3181.10.6.1.34.100.1.26
Typcial power consumption values are shown if available from the interface.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

informationAdditionalInformation		1.3.6.1.4.1.3181.10.6.1.34.100.1.27
Some special SFP can supply additional measurement data. For example OTDR reflection data can be listed here.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString