G6-NTP-MIB

File: G6-NTP-MIB.mib (6354 bytes)

Imported modules

MICROSENS-G6-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	Integer32
Unsigned32	Counter32	enterprises
NOTIFICATION-TYPE	DisplayString	MacAddress
g6

Defined Values

management		1.3.6.1.4.1.3181.10.6.3
Microsens private MIB for Generation 6 Ethernet Switches
MODULE-IDENTITY

ntp		1.3.6.1.4.1.3181.10.6.3.73
OBJECT IDENTIFIER

ntpEnableNtp		1.3.6.1.4.1.3181.10.6.3.73.1
When enabled the local clock will be synchronized with the time provided by a time server.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

ntpSyncNow		1.3.6.1.4.1.3181.10.6.3.73.2
Action command to read time server now and setup the internal clock.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

ntpDhcpProvidesNtpServer		1.3.6.1.4.1.3181.10.6.3.73.3
Enable DHCP to automatically retrieve NTP server address(es). When disabled, the locally defined addresses are used instead.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

ntpMainNtpServer		1.3.6.1.4.1.3181.10.6.3.73.4
This is the preferred NTP server address. IP address or symbolic name may be used.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

ntpBackupNtpServer		1.3.6.1.4.1.3181.10.6.3.73.5
This defines an optional alternate ntp server address. IP address or symbolic name may be used.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

ntpTrustedServer		1.3.6.1.4.1.3181.10.6.3.73.6
Some NTP server (Windows) indicate a too large deviation or indicate they are unreliable when they are not externally synchronized. To be able to still use such a server set this option to true.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

ntpSyncInterval		1.3.6.1.4.1.3181.10.6.3.73.7
Resynchronization interval (minutes), default once per day.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..65535

ntpShowTimeDate		1.3.6.1.4.1.3181.10.6.3.73.8
Show system time and date.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

ntpListTimeZones		1.3.6.1.4.1.3181.10.6.3.73.9
Displays a long list of available timezones. Pick the timezone that matches your location and use this name for the time_zone parameter.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

ntpTimeZone		1.3.6.1.4.1.3181.10.6.3.73.10
Enter a string exactly as obtained via list_time_zones command. Note that a change of the time zone if only effective after a system reboot.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

ntpTimeFormat		1.3.6.1.4.1.3181.10.6.3.73.11
This parameter permits definition of the time format displayed under ntp.local_time. When left blank the default format hrs:min:sec is used. The parameter follows the Linux date command syntax. Please refer to external documentation for details. Use %k:%M for time without seconds. Use %P to add AM/PM where is applies. There are more options.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

ntpDateFormat		1.3.6.1.4.1.3181.10.6.3.73.12
This parameter permits definition of the data format displayed under ntp.local_date. When left blank the default format year-month-date is used. The parameter follows the Linux date command syntax. Please refer to external documentation for details. It is also possible to add weekday %A or month %B or week of year %V, etc.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

ntpStatus		1.3.6.1.4.1.3181.10.6.3.73.100
Indicates by which means the clock was last set.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unset(0), manuallySet(1), synchronized(2), syncFailed(4), dayLightSavingTime(16)

ntpLocalTime		1.3.6.1.4.1.3181.10.6.3.73.101
Displays the current local date according to selected time zone in the format defined user ntp.time_format.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ntpLocalDate		1.3.6.1.4.1.3181.10.6.3.73.102
Displays the current local date according to selected time zone in the format defined user ntp.date_format.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ntpUsedNtpServer		1.3.6.1.4.1.3181.10.6.3.73.103
Actually used ntp server IP address or name
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ntpDynamicNtpServer1		1.3.6.1.4.1.3181.10.6.3.73.104
Main dynamically assigned ntp server IP address.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..20)

ntpDynamicNtpServer2		1.3.6.1.4.1.3181.10.6.3.73.105
Alternate dynamically assigned ntp server IP address.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..20)

ntpDynamicNtpServer3		1.3.6.1.4.1.3181.10.6.3.73.106
Alternate dynamically assigned ntp server IP address.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..20)

ntpDynamicNtpServer4		1.3.6.1.4.1.3181.10.6.3.73.107
Alternate dynamically assigned ntp server IP address.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..20)

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor