G6-IP-MIB

File: G6-IP-MIB.mib (12769 bytes)

Imported modules

MICROSENS-G6-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	Integer32
Unsigned32	Counter32	enterprises
NOTIFICATION-TYPE	DisplayString	MacAddress
g6

Defined Types

V4ConfigEntry
SEQUENCE
	v4ConfigIndex	INTEGER
	v4ConfigDhcpMode	INTEGER
	v4ConfigStaticDeviceIp	OCTET STRING
	v4ConfigStaticSubnetMask	OCTET STRING
	v4ConfigStaticGateway	OCTET STRING
	v4ConfigStaticDnsServer	OCTET STRING
	v4ConfigSecondaryDeviceIp	OCTET STRING
	v4ConfigSecondarySubnetMask	OCTET STRING
	v4ConfigDefaultAddressSelection	INTEGER

V6ConfigEntry
SEQUENCE
	v6ConfigIndex	INTEGER
	v6ConfigEnableIpv6	INTEGER
	v6ConfigEnableIcmpAutoAddress	INTEGER
	v6ConfigEnableDhcpAutoAddress	INTEGER

V6AddressEntry
SEQUENCE
	v6AddressIndex	INTEGER
	v6AddressIp	DisplayString

V4StatusEntry
SEQUENCE
	v4StatusIndex	INTEGER
	v4StatusDynamicDeviceIp	OCTET STRING
	v4StatusDynamicSubnetMask	OCTET STRING
	v4StatusDynamicGateway	OCTET STRING
	v4StatusDynamicDnsServer1	OCTET STRING
	v4StatusDynamicDnsServer2	OCTET STRING
	v4StatusDynamicDnsServer3	OCTET STRING
	v4StatusDynamicDnsServer4	OCTET STRING
	v4StatusOutgoingDeviceIp	OCTET STRING

V6StatusEntry
SEQUENCE
	v6StatusIndex	INTEGER
	v6StatusIp	OCTET STRING
	v6StatusScope	INTEGER
	v6StatusState	INTEGER

Defined Values

device		1.3.6.1.4.1.3181.10.6.1
Microsens private MIB for Generation 6 Ethernet Switches
MODULE-IDENTITY

ip		1.3.6.1.4.1.3181.10.6.1.22
OBJECT IDENTIFIER

ipPingTest		1.3.6.1.4.1.3181.10.6.1.22.1
Supply an IP address to ping for reachability testing.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

ipTraceRoute		1.3.6.1.4.1.3181.10.6.1.22.2
Supply an IP address to trace route testing.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

ipDnsLookup		1.3.6.1.4.1.3181.10.6.1.22.3
Supply a hostname or web address to query for its ip address.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

ipArpTable		1.3.6.1.4.1.3181.10.6.1.22.4
Displays the content of the ARP table used for management access.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

ipHostname		1.3.6.1.4.1.3181.10.6.1.22.5
Defines the local hostname.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

ipLocalMtu		1.3.6.1.4.1.3181.10.6.1.22.6
Defines MTU value for locally generated data.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..65535

v4ConfigTable		1.3.6.1.4.1.3181.10.6.1.22.7
This section configures IP version 4 fixed IP settings or enables use of DHCP alternatively.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		V4ConfigEntry

v4ConfigEntry		1.3.6.1.4.1.3181.10.6.1.22.7.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	V4ConfigEntry

v4ConfigIndex		1.3.6.1.4.1.3181.10.6.1.22.7.1.1
Automatically generated
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	0

v4ConfigDhcpMode		1.3.6.1.4.1.3181.10.6.1.22.7.1.2
Enable DHCP to automatically retrieve an IP address and subnet mask. Also DHCP may be used to supply a CLI script file reference to be used on assignment.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), useDhcp(1), dhcpWithScript(2)

v4ConfigStaticDeviceIp		1.3.6.1.4.1.3181.10.6.1.22.7.1.3
Static device IP address. When DHCP is enabled, DHCP has preference over this setting.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..20)

v4ConfigStaticSubnetMask		1.3.6.1.4.1.3181.10.6.1.22.7.1.4
Static subnet mask. When DHCP is enabled, DHCP has preference over this setting.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..20)

v4ConfigStaticGateway		1.3.6.1.4.1.3181.10.6.1.22.7.1.5
Static default gateway IP address. When DHCP is enabled, DHCP has preference over this setting.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..20)

v4ConfigStaticDnsServer		1.3.6.1.4.1.3181.10.6.1.22.7.1.6
Static domain name server IP address. When DHCP is enabled, DHCP has preference over this setting.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..20)

v4ConfigSecondaryDeviceIp		1.3.6.1.4.1.3181.10.6.1.22.7.1.7
Alternative IP address for management access. Not required in most installations.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..20)

v4ConfigSecondarySubnetMask		1.3.6.1.4.1.3181.10.6.1.22.7.1.8
This subnet mask applies to secondary ip address.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..20)

v4ConfigDefaultAddressSelection		1.3.6.1.4.1.3181.10.6.1.22.7.1.9
This parameter defines which own ip address is used for outgoing packets generated by the device. This only applies when a secondary_device_ip is configured.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	primary(0), secondary(1)

v6ConfigTable		1.3.6.1.4.1.3181.10.6.1.22.8
This section configures IP version 6 fixed IP settings or enables use of automatic configuration alternatively.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		V6ConfigEntry

v6ConfigEntry		1.3.6.1.4.1.3181.10.6.1.22.8.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	V6ConfigEntry

v6ConfigIndex		1.3.6.1.4.1.3181.10.6.1.22.8.1.1
Automatically generated
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	0

v6ConfigEnableIpv6		1.3.6.1.4.1.3181.10.6.1.22.8.1.2
General enable of IPv6 management access functionality.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

v6ConfigEnableIcmpAutoAddress		1.3.6.1.4.1.3181.10.6.1.22.8.1.3
Decides if an ICMP assigned IPv6 address is accepted.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

v6ConfigEnableDhcpAutoAddress		1.3.6.1.4.1.3181.10.6.1.22.8.1.4
Decides if an DHCP assigned IPv6 address is accepted.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

v6AddressTable		1.3.6.1.4.1.3181.10.6.1.22.9
Defines as many static IPv6 address entries as desired.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		V6AddressEntry

v6AddressEntry		1.3.6.1.4.1.3181.10.6.1.22.9.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	V6AddressEntry

v6AddressIndex		1.3.6.1.4.1.3181.10.6.1.22.9.1.1
Automatically generated
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	0..7

v6AddressIp		1.3.6.1.4.1.3181.10.6.1.22.9.1.2
IPv6 address
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

v4StatusTable		1.3.6.1.4.1.3181.10.6.1.22.100
This section shows a summary of IPv4 settings as they are currently active. These may reflect the statically configured values or may be dynamically assigned using DHCP.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		V4StatusEntry

v4StatusEntry		1.3.6.1.4.1.3181.10.6.1.22.100.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	V4StatusEntry

v4StatusIndex		1.3.6.1.4.1.3181.10.6.1.22.100.1.1
Automatically generated
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	0

v4StatusDynamicDeviceIp		1.3.6.1.4.1.3181.10.6.1.22.100.1.2
Currently used device IP address.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..20)

v4StatusDynamicSubnetMask		1.3.6.1.4.1.3181.10.6.1.22.100.1.3
Currently used subnet mask.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..20)

v4StatusDynamicGateway		1.3.6.1.4.1.3181.10.6.1.22.100.1.4
Currently used gateway IP address.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..20)

v4StatusDynamicDnsServer1		1.3.6.1.4.1.3181.10.6.1.22.100.1.5
Currently used domain name server IP address.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..20)

v4StatusDynamicDnsServer2		1.3.6.1.4.1.3181.10.6.1.22.100.1.6
Alternate currently used domain name server IP address.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..20)

v4StatusDynamicDnsServer3		1.3.6.1.4.1.3181.10.6.1.22.100.1.7
Alternate currently used domain name server IP address.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..20)

v4StatusDynamicDnsServer4		1.3.6.1.4.1.3181.10.6.1.22.100.1.8
Alternate currently used domain name server IP address.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..20)

v4StatusOutgoingDeviceIp		1.3.6.1.4.1.3181.10.6.1.22.100.1.9
Reflects the value v4_config.default_address_selection setting.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..20)

v6StatusTable		1.3.6.1.4.1.3181.10.6.1.22.101
This section shows a summary of IPv6 settings as they are currently active. These may reflect the statically configured values or may be dynamically assigned using DHCP or ICMP.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		V6StatusEntry

v6StatusEntry		1.3.6.1.4.1.3181.10.6.1.22.101.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	V6StatusEntry

v6StatusIndex		1.3.6.1.4.1.3181.10.6.1.22.101.1.1
Automatically generated
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	0..7

v6StatusIp		1.3.6.1.4.1.3181.10.6.1.22.101.1.2
IPv6 address.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..50)

v6StatusScope		1.3.6.1.4.1.3181.10.6.1.22.101.1.3
Indicates the scope this IP is valid.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	link(0), site(1), global(2), other(3)

v6StatusState		1.3.6.1.4.1.3181.10.6.1.22.101.1.4
Indicates the state of this IP.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	stateless(0), stateful(1), both(2), other(3)

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor