FLARION-PHYS-MIB

File: FLARION-PHYS-MIB.mib (58194 bytes)

Imported modules

SNMPv2-SMI RFC1155-SMI SNMPv2-TC
FLARION-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
IpAddress TimeTicks Unsigned32
Counter32 enterprises DisplayString
RowStatus DateAndTime TruthValue
AdminState MoType rrMib
rrManagedObjs FloatAsString rrBaseBandUnit

Defined Types

ChassisType  
INTEGER chassisUnknown(0), chassisCpciIndoor(1), chassisCpciOutdoor(2), chassisEnetIndoor(3), chassisEnetOutdoor(4)    

RelayState  
INTEGER relayUnknown(0), relayOpen(1), relayClosed(2)    

CardOpState  
INTEGER cardOpStateUnknown(0), cardOpStateNotPresent(1), cardOpStateStandby(2), cardOpStateActive(3), cardOpStateDown(4)    

CardFaultLed  
INTEGER faultLedUnknown(0), faultLedRed(1), faultLedOrange(2), faultLedGreen(3)    

CardTempStatus  
INTEGER tempUnknown(0), tempNominal(1), tempHigh(2), tempSevere(3), tempCritical(4)    

CardVoltageStatus  
INTEGER voltageUnknown(0), voltageNominal(1), voltageLow(2), voltageHigh(3)    

RfBand  
INTEGER rfBandUnknown(0), rfBandUpper700MHz(1), rfBandLow800MHz(2), rfBandCellBand(3), rfBandSmrBand(4), rfBandPcsKorea(5), rfBandPcsUs(6), rfBandUmts(7), rfBand2P3GHz(8), rfBandMmds(9)    

PaRfBand  
INTEGER paRfBandUnknown(0), paRfBand747to770MHz(1), paRfBand861to894MHz(2), paRfBand1930to1990MHz(3), paRfBand2370to2400MHz(4), paRfBand2110to2170MHz(5), paRfBand2620to2686MHz(6), paRfBand740Mto746Hz(7)    

PaState  
INTEGER paStateUnknown(0), paStateProbing(1), paStateNotPresent(2), paStateDisabledByPa(3), paStateDisabledByBts(4), paStateEnabling(5), paStateEnabled(6), paStateDisabling(7)    

AssemblyIdSource  
INTEGER aidSourceUnknown(0), aidSourceDatabase(1), aidSourceTarget(2)    

RrChassisTableEntry  
SEQUENCE    
  rrChassisSlotId INTEGER
  rrChassisSlotHwType MoType
  rrChassisSlotHwName DisplayString
  rrChassisSlotHwStatus CardOpState
  rrChassisSlotHwVer DisplayString
  rrChassisSlotHwEsn OCTET STRING
  rrChassisSlotSwVer DisplayString

PhyFanEntry  
SEQUENCE    
  phyFanIndex INTEGER
  phyFanOk TruthValue

PhyRelayEntry  
SEQUENCE    
  phyRelayIndex INTEGER
  phyRelayName DisplayString
  phyRelayState RelayState

PhyAlarmInputEntry  
SEQUENCE    
  phyAlarmInputIndex INTEGER
  phyAlarmInputEnable TruthValue
  phyAlarmInputName DisplayString
  phyAlarmInputState TruthValue

PhyPcuEntry  
SEQUENCE    
  phyPcuIndex INTEGER
  phyPcuPowerFail TruthValue

PhyAiuEntry  
SEQUENCE    
  phyAiuIndex INTEGER
  phyAiuOpState CardOpState
  phyAiuFaultLed CardFaultLed
  phyAiuTempStatus CardTempStatus
  phyAiuVoltageStatus CardVoltageStatus
  phyAiuSerialNumber DisplayString
  phyAiuProductionDate DisplayString
  phyAiuPartNumber DisplayString
  phyAiuDescription DisplayString
  phyAiuHardwareVersion DisplayString
  phyAiuIpmiSwVersion DisplayString
  phyAiuAssemblyId DisplayString
  phyAiuAssemblyIdSrc AssemblyIdSource
  phyAiuExcessiveFakeAid TruthValue
  phyAiuAdminState AdminState
  phyAiuRebootRr TruthValue

PhyMcuEntry  
SEQUENCE    
  phyMcuIndex INTEGER
  phyMcuOpState CardOpState
  phyMcuFaultLed CardFaultLed
  phyMcuTempStatus CardTempStatus
  phyMcuVoltageStatus CardVoltageStatus
  phyMcuSerialNumber DisplayString
  phyMcuProductionDate DisplayString
  phyMcuPartNumber DisplayString
  phyMcuDescription DisplayString
  phyMcuHardwareVersion DisplayString
  phyMcuIpmiSwVersion DisplayString
  phyMcuAssemblyId DisplayString
  phyMcuAssemblyIdSrc AssemblyIdSource
  phyMcuExcessiveFakeAid TruthValue
  phyMcuAdminState AdminState
  phyCpldVersion DisplayString

PhyBbuEntry  
SEQUENCE    
  phyBbuIndex INTEGER
  phyBbuOpState CardOpState
  phyBbuFaultLed CardFaultLed
  phyBbuTempStatus CardTempStatus
  phyBbuVoltageStatus CardVoltageStatus
  phyBbuSerialNumber DisplayString
  phyBbuProductionDate DisplayString
  phyBbuPartNumber DisplayString
  phyBbuDescription DisplayString
  phyBbuHardwareVersion DisplayString
  phyBbuIpmiSwVersion DisplayString
  phyBbuAssemblyId DisplayString
  phyBbuAssemblyIdSrc AssemblyIdSource
  phyBbuExcessiveFakeAid TruthValue
  phyBbuAdminState AdminState

PhyRxuEntry  
SEQUENCE    
  phyRxuIndex INTEGER
  phyRxuOpState CardOpState
  phyRxuFaultLed CardFaultLed
  phyRxuTempStatus CardTempStatus
  phyRxuVoltageStatus CardVoltageStatus
  phyRxuSerialNumber DisplayString
  phyRxuProductionDate DisplayString
  phyRxuPartNumber DisplayString
  phyRxuDescription DisplayString
  phyRxuHardwareVersion DisplayString
  phyRxuIpmiSwVersion DisplayString
  phyRxuAssemblyId DisplayString
  phyRxuAssemblyIdSrc AssemblyIdSource
  phyRxuExcessiveFakeAid TruthValue
  phyRxuAdminState AdminState
  phyRxuRfBand RfBand

PhyTxuEntry  
SEQUENCE    
  phyTxuIndex INTEGER
  phyTxuOpState CardOpState
  phyTxuFaultLed CardFaultLed
  phyTxuTempStatus CardTempStatus
  phyTxuVoltageStatus CardVoltageStatus
  phyTxuSerialNumber DisplayString
  phyTxuProductionDate DisplayString
  phyTxuPartNumber DisplayString
  phyTxuDescription DisplayString
  phyTxuHardwareVersion DisplayString
  phyTxuIpmiSwVersion DisplayString
  phyTxuAssemblyId DisplayString
  phyTxuAssemblyIdSrc AssemblyIdSource
  phyTxuExcessiveFakeAid TruthValue
  phyTxuAdminState AdminState
  phyTxuRfBand RfBand

PaEntry  
SEQUENCE    
  paIndex INTEGER
  paAdminState AdminState
  paOpState CardOpState
  paTempStatus CardTempStatus
  paOutputTxPower FloatAsString
  paInputTxPower FloatAsString
  paTxReflectedPower FloatAsString
  paDcPowerFault TruthValue
  paRfOverdriveFault TruthValue
  paFeedForwardFault TruthValue
  paSerialNumber DisplayString
  paRfBand RfBand
  paHardwareVersion DisplayString
  paTemperature INTEGER
  paReflectedPowerFault TruthValue
  paUnderPowerFault TruthValue
  paTargetOutputTxPower FloatAsString
  paOperStatus PaState
  paRadioFreqBand PaRfBand

PaPowerEntry  
SEQUENCE    
  paPowerIndex INTEGER
  paPowerTxOutput INTEGER
  paPowerTxInput INTEGER
  paPowerTxReflected INTEGER

BbuSysEntry  
SEQUENCE    
  bbuSysId INTEGER
  bbuDspVer DisplayString
  bbuLlcVer DisplayString
  bbuTxFpgaVer DisplayString
  bbuRxFpgaVer DisplayString
  bbuLdpcVer Unsigned32
  bbuRfChanNum INTEGER
  bbuExtGainTx INTEGER
  bbuExtGainRx INTEGER
  bbuRfGainRx0 INTEGER
  bbuRfGainRx1 INTEGER
  bbuRfBand INTEGER
  bbuRfPowerTx0 INTEGER
  bbuRfPowerTx1 INTEGER
  bbuRfuEnableMask INTEGER
  bbuExtTxGain FloatAsString
  bbuExtRxGain FloatAsString
  bbuRfRx0Gain FloatAsString
  bbuRfRx1Gain FloatAsString
  bbuRfTx0Power FloatAsString
  bbuRfTx1Power FloatAsString
  bbuTxPwrDeviationLimit INTEGER
  bbuSlope INTEGER
  bbuMcastSnr INTEGER
  bbuScmType INTEGER
  bbuSleepInactivityTimer INTEGER
  bbuLuTimer INTEGER

Defined Values

rrPhyShelf 1.3.6.1.4.1.8603.1.2.3
OBJECT IDENTIFIER    

rrPaShelf 1.3.6.1.4.1.8603.1.2.4
OBJECT IDENTIFIER    

rrChassis 1.3.6.1.4.1.8603.1.2.1.8
OBJECT IDENTIFIER    

rrChassisType 1.3.6.1.4.1.8603.1.2.1.8.1
The chassis revision.
OBJECT-TYPE    
  ChassisType  

rrChassisRev 1.3.6.1.4.1.8603.1.2.1.8.2
The chassis revision.
OBJECT-TYPE    
  DisplayString  

rrChassisMaxSlots 1.3.6.1.4.1.8603.1.2.1.8.3
Maximum number of slots in the chassis.
OBJECT-TYPE    
  INTEGER  

rrChassisNumCards 1.3.6.1.4.1.8603.1.2.1.8.4
Number of cards detected in the chassis.
OBJECT-TYPE    
  INTEGER  

rrChassisTable 1.3.6.1.4.1.8603.1.2.1.8.5
Table containing chassis card information.
OBJECT-TYPE    
  SEQUENCE OF  
    RrChassisTableEntry

rrChassisTableEntry 1.3.6.1.4.1.8603.1.2.1.8.5.1
RadioRouter chassis card table entry.
OBJECT-TYPE    
  RrChassisTableEntry  

rrChassisSlotId 1.3.6.1.4.1.8603.1.2.1.8.5.1.1
The chassis slot of the card.
OBJECT-TYPE    
  INTEGER  

rrChassisSlotHwType 1.3.6.1.4.1.8603.1.2.1.8.5.1.2
The card type.
OBJECT-TYPE    
  MoType  

rrChassisSlotHwName 1.3.6.1.4.1.8603.1.2.1.8.5.1.3
The card name.
OBJECT-TYPE    
  DisplayString  

rrChassisSlotHwStatus 1.3.6.1.4.1.8603.1.2.1.8.5.1.4
The card hardware operational status.
OBJECT-TYPE    
  CardOpState  

rrChassisSlotHwVer 1.3.6.1.4.1.8603.1.2.1.8.5.1.5
The card hardware version number.
OBJECT-TYPE    
  DisplayString  

rrChassisSlotHwEsn 1.3.6.1.4.1.8603.1.2.1.8.5.1.6
The card Electronic Serial Number.
OBJECT-TYPE    
  OCTET STRING Size(8)  

rrChassisSlotSwVer 1.3.6.1.4.1.8603.1.2.1.8.5.1.8
The card IPMI (Intelligent Platform Management Interface) firmware version number.
OBJECT-TYPE    
  DisplayString  

phyChassisType 1.3.6.1.4.1.8603.1.2.3.1
Chassis type.
OBJECT-TYPE    
  ChassisType  

phySerialNumber 1.3.6.1.4.1.8603.1.2.3.2
Chassis serial number.
OBJECT-TYPE    
  DisplayString  

phyProductionDate 1.3.6.1.4.1.8603.1.2.3.3
Chassis production date (mm/dd/yyyy).
OBJECT-TYPE    
  DisplayString  

phyPartNumber 1.3.6.1.4.1.8603.1.2.3.4
Chassis part number.
OBJECT-TYPE    
  DisplayString  

phyHardwareVersion 1.3.6.1.4.1.8603.1.2.3.5
Chassis hardware version.
OBJECT-TYPE    
  DisplayString  

phyChassisRfBand 1.3.6.1.4.1.8603.1.2.3.6
Chassis RF band.
OBJECT-TYPE    
  RfBand  

phyAssemblyId 1.3.6.1.4.1.8603.1.2.3.7
Chassis assembly ID.
OBJECT-TYPE    
  DisplayString  

phyFanTable 1.3.6.1.4.1.8603.1.2.3.10
Tok_String
OBJECT-TYPE    
  SEQUENCE OF  
    PhyFanEntry

phyFanEntry 1.3.6.1.4.1.8603.1.2.3.10.1
Tok_String
OBJECT-TYPE    
  PhyFanEntry  

phyFanIndex 1.3.6.1.4.1.8603.1.2.3.10.1.1
Fan index.
OBJECT-TYPE    
  INTEGER  

phyFanOk 1.3.6.1.4.1.8603.1.2.3.10.1.2
Fan status.
OBJECT-TYPE    
  TruthValue  

phyRelayTable 1.3.6.1.4.1.8603.1.2.3.11
Tok_String
OBJECT-TYPE    
  SEQUENCE OF  
    PhyRelayEntry

phyRelayEntry 1.3.6.1.4.1.8603.1.2.3.11.1
Tok_String
OBJECT-TYPE    
  PhyRelayEntry  

phyRelayIndex 1.3.6.1.4.1.8603.1.2.3.11.1.1
Relay index.
OBJECT-TYPE    
  INTEGER  

phyRelayName 1.3.6.1.4.1.8603.1.2.3.11.1.2
Relay name.
OBJECT-TYPE    
  DisplayString  

phyRelayState 1.3.6.1.4.1.8603.1.2.3.11.1.3
Relay state.
OBJECT-TYPE    
  RelayState  

phyAlarmInputTable 1.3.6.1.4.1.8603.1.2.3.12
Tok_String
OBJECT-TYPE    
  SEQUENCE OF  
    PhyAlarmInputEntry

phyAlarmInputEntry 1.3.6.1.4.1.8603.1.2.3.12.1
Tok_String
OBJECT-TYPE    
  PhyAlarmInputEntry  

phyAlarmInputIndex 1.3.6.1.4.1.8603.1.2.3.12.1.1
AlarmInput index.
OBJECT-TYPE    
  INTEGER  

phyAlarmInputEnable 1.3.6.1.4.1.8603.1.2.3.12.1.2
AlarmInput enable.
OBJECT-TYPE    
  TruthValue  

phyAlarmInputName 1.3.6.1.4.1.8603.1.2.3.12.1.3
AlarmInput name.
OBJECT-TYPE    
  DisplayString  

phyAlarmInputState 1.3.6.1.4.1.8603.1.2.3.12.1.4
AlarmInput state.
OBJECT-TYPE    
  TruthValue  

phyPcuTable 1.3.6.1.4.1.8603.1.2.3.13
Tok_String
OBJECT-TYPE    
  SEQUENCE OF  
    PhyPcuEntry

phyPcuEntry 1.3.6.1.4.1.8603.1.2.3.13.1
Tok_String
OBJECT-TYPE    
  PhyPcuEntry  

phyPcuIndex 1.3.6.1.4.1.8603.1.2.3.13.1.1
PCU index.
OBJECT-TYPE    
  INTEGER  

phyPcuPowerFail 1.3.6.1.4.1.8603.1.2.3.13.1.2
PCU power fail.
OBJECT-TYPE    
  TruthValue  

phyAiuTable 1.3.6.1.4.1.8603.1.2.3.14
Tok_String
OBJECT-TYPE    
  SEQUENCE OF  
    PhyAiuEntry

phyAiuEntry 1.3.6.1.4.1.8603.1.2.3.14.1
Tok_String
OBJECT-TYPE    
  PhyAiuEntry  

phyAiuIndex 1.3.6.1.4.1.8603.1.2.3.14.1.1
AIU index.
OBJECT-TYPE    
  INTEGER  

phyAiuOpState 1.3.6.1.4.1.8603.1.2.3.14.1.2
AIU operational state.
OBJECT-TYPE    
  CardOpState  

phyAiuFaultLed 1.3.6.1.4.1.8603.1.2.3.14.1.3
AIU fault LED color.
OBJECT-TYPE    
  CardFaultLed  

phyAiuTempStatus 1.3.6.1.4.1.8603.1.2.3.14.1.4
AIU temperature status.
OBJECT-TYPE    
  CardTempStatus  

phyAiuVoltageStatus 1.3.6.1.4.1.8603.1.2.3.14.1.5
AIU voltage status.
OBJECT-TYPE    
  CardVoltageStatus  

phyAiuSerialNumber 1.3.6.1.4.1.8603.1.2.3.14.1.6
AIU serial number.
OBJECT-TYPE    
  DisplayString  

phyAiuProductionDate 1.3.6.1.4.1.8603.1.2.3.14.1.7
AIU production date.
OBJECT-TYPE    
  DisplayString  

phyAiuPartNumber 1.3.6.1.4.1.8603.1.2.3.14.1.8
AIU part number.
OBJECT-TYPE    
  DisplayString  

phyAiuDescription 1.3.6.1.4.1.8603.1.2.3.14.1.9
AIU description.
OBJECT-TYPE    
  DisplayString  

phyAiuHardwareVersion 1.3.6.1.4.1.8603.1.2.3.14.1.10
AIU hardware version.
OBJECT-TYPE    
  DisplayString  

phyAiuIpmiSwVersion 1.3.6.1.4.1.8603.1.2.3.14.1.11
AIU IPMI software version.
OBJECT-TYPE    
  DisplayString  

phyAiuAssemblyId 1.3.6.1.4.1.8603.1.2.3.14.1.12
AIU assembly ID.
OBJECT-TYPE    
  DisplayString  

phyAiuAssemblyIdSrc 1.3.6.1.4.1.8603.1.2.3.14.1.13
AIU assembly ID source.
OBJECT-TYPE    
  AssemblyIdSource  

phyAiuExcessiveFakeAid 1.3.6.1.4.1.8603.1.2.3.14.1.14
This object is true(1) if the assembly ID is programmed under more than one source.
OBJECT-TYPE    
  TruthValue  

phyAiuAdminState 1.3.6.1.4.1.8603.1.2.3.14.1.20
AIU administrative state.
OBJECT-TYPE    
  AdminState  

phyAiuRebootRr 1.3.6.1.4.1.8603.1.2.3.14.1.21
Setting this object to true(1) will power cycle the RadioRouter chassis!
OBJECT-TYPE    
  TruthValue  

phyMcuTable 1.3.6.1.4.1.8603.1.2.3.15
Tok_String
OBJECT-TYPE    
  SEQUENCE OF  
    PhyMcuEntry

phyMcuEntry 1.3.6.1.4.1.8603.1.2.3.15.1
Tok_String
OBJECT-TYPE    
  PhyMcuEntry  

phyMcuIndex 1.3.6.1.4.1.8603.1.2.3.15.1.1
MCU index.
OBJECT-TYPE    
  INTEGER  

phyMcuOpState 1.3.6.1.4.1.8603.1.2.3.15.1.2
MCU operational state.
OBJECT-TYPE    
  CardOpState  

phyMcuFaultLed 1.3.6.1.4.1.8603.1.2.3.15.1.3
MCU fault LED color.
OBJECT-TYPE    
  CardFaultLed  

phyMcuTempStatus 1.3.6.1.4.1.8603.1.2.3.15.1.4
MCU temperature status.
OBJECT-TYPE    
  CardTempStatus  

phyMcuVoltageStatus 1.3.6.1.4.1.8603.1.2.3.15.1.5
MCU voltage status.
OBJECT-TYPE    
  CardVoltageStatus  

phyMcuSerialNumber 1.3.6.1.4.1.8603.1.2.3.15.1.6
MCU serial number.
OBJECT-TYPE    
  DisplayString  

phyMcuProductionDate 1.3.6.1.4.1.8603.1.2.3.15.1.7
MCU production date.
OBJECT-TYPE    
  DisplayString  

phyMcuPartNumber 1.3.6.1.4.1.8603.1.2.3.15.1.8
MCU part number.
OBJECT-TYPE    
  DisplayString  

phyMcuDescription 1.3.6.1.4.1.8603.1.2.3.15.1.9
MCU description.
OBJECT-TYPE    
  DisplayString  

phyMcuHardwareVersion 1.3.6.1.4.1.8603.1.2.3.15.1.10
MCU hardware version.
OBJECT-TYPE    
  DisplayString  

phyMcuIpmiSwVersion 1.3.6.1.4.1.8603.1.2.3.15.1.11
MCU IPMI software version.
OBJECT-TYPE    
  DisplayString  

phyMcuAssemblyId 1.3.6.1.4.1.8603.1.2.3.15.1.12
MCU assembly ID.
OBJECT-TYPE    
  DisplayString  

phyMcuAssemblyIdSrc 1.3.6.1.4.1.8603.1.2.3.15.1.13
MCU assembly ID source.
OBJECT-TYPE    
  AssemblyIdSource  

phyMcuExcessiveFakeAid 1.3.6.1.4.1.8603.1.2.3.15.1.14
This object is true if the assembly ID is programmed under more than one source.
OBJECT-TYPE    
  TruthValue  

phyMcuAdminState 1.3.6.1.4.1.8603.1.2.3.15.1.20
MCU administrative state.
OBJECT-TYPE    
  AdminState  

phyCpldVersion 1.3.6.1.4.1.8603.1.2.3.15.1.21
MCU CPLD version.
OBJECT-TYPE    
  DisplayString  

phyBbuTable 1.3.6.1.4.1.8603.1.2.3.16
Tok_String
OBJECT-TYPE    
  SEQUENCE OF  
    PhyBbuEntry

phyBbuEntry 1.3.6.1.4.1.8603.1.2.3.16.1
Tok_String
OBJECT-TYPE    
  PhyBbuEntry  

phyBbuIndex 1.3.6.1.4.1.8603.1.2.3.16.1.1
BBU index.
OBJECT-TYPE    
  INTEGER  

phyBbuOpState 1.3.6.1.4.1.8603.1.2.3.16.1.2
BBU operational state.
OBJECT-TYPE    
  CardOpState  

phyBbuFaultLed 1.3.6.1.4.1.8603.1.2.3.16.1.3
BBU fault LED color.
OBJECT-TYPE    
  CardFaultLed  

phyBbuTempStatus 1.3.6.1.4.1.8603.1.2.3.16.1.4
BBU temperature status.
OBJECT-TYPE    
  CardTempStatus  

phyBbuVoltageStatus 1.3.6.1.4.1.8603.1.2.3.16.1.5
BBU voltage status.
OBJECT-TYPE    
  CardVoltageStatus  

phyBbuSerialNumber 1.3.6.1.4.1.8603.1.2.3.16.1.6
BBU serial number.
OBJECT-TYPE    
  DisplayString  

phyBbuProductionDate 1.3.6.1.4.1.8603.1.2.3.16.1.7
BBU production date.
OBJECT-TYPE    
  DisplayString  

phyBbuPartNumber 1.3.6.1.4.1.8603.1.2.3.16.1.8
BBU part number.
OBJECT-TYPE    
  DisplayString  

phyBbuDescription 1.3.6.1.4.1.8603.1.2.3.16.1.9
BBU description.
OBJECT-TYPE    
  DisplayString  

phyBbuHardwareVersion 1.3.6.1.4.1.8603.1.2.3.16.1.10
BBU hardware version.
OBJECT-TYPE    
  DisplayString  

phyBbuIpmiSwVersion 1.3.6.1.4.1.8603.1.2.3.16.1.11
BBU IPMI software version.
OBJECT-TYPE    
  DisplayString  

phyBbuAssemblyId 1.3.6.1.4.1.8603.1.2.3.16.1.12
BBU assembly Id.
OBJECT-TYPE    
  DisplayString  

phyBbuAssemblyIdSrc 1.3.6.1.4.1.8603.1.2.3.16.1.13
BBU assembly Id source.
OBJECT-TYPE    
  AssemblyIdSource  

phyBbuExcessiveFakeAid 1.3.6.1.4.1.8603.1.2.3.16.1.14
This object is true if the assembly ID is programmed under more than one source.
OBJECT-TYPE    
  TruthValue  

phyBbuAdminState 1.3.6.1.4.1.8603.1.2.3.16.1.20
BBU administrative state.
OBJECT-TYPE    
  AdminState  

phyRxuTable 1.3.6.1.4.1.8603.1.2.3.17
Tok_String
OBJECT-TYPE    
  SEQUENCE OF  
    PhyRxuEntry

phyRxuEntry 1.3.6.1.4.1.8603.1.2.3.17.1
Tok_String
OBJECT-TYPE    
  PhyRxuEntry  

phyRxuIndex 1.3.6.1.4.1.8603.1.2.3.17.1.1
RXU index.
OBJECT-TYPE    
  INTEGER  

phyRxuOpState 1.3.6.1.4.1.8603.1.2.3.17.1.2
RXU operational state.
OBJECT-TYPE    
  CardOpState  

phyRxuFaultLed 1.3.6.1.4.1.8603.1.2.3.17.1.3
RXU fault LED color.
OBJECT-TYPE    
  CardFaultLed  

phyRxuTempStatus 1.3.6.1.4.1.8603.1.2.3.17.1.4
RXU temperature status.
OBJECT-TYPE    
  CardTempStatus  

phyRxuVoltageStatus 1.3.6.1.4.1.8603.1.2.3.17.1.5
RXU voltage status.
OBJECT-TYPE    
  CardVoltageStatus  

phyRxuSerialNumber 1.3.6.1.4.1.8603.1.2.3.17.1.6
RXU serial number.
OBJECT-TYPE    
  DisplayString  

phyRxuProductionDate 1.3.6.1.4.1.8603.1.2.3.17.1.7
RXU production date.
OBJECT-TYPE    
  DisplayString  

phyRxuPartNumber 1.3.6.1.4.1.8603.1.2.3.17.1.8
RXU part number.
OBJECT-TYPE    
  DisplayString  

phyRxuDescription 1.3.6.1.4.1.8603.1.2.3.17.1.9
RXU description.
OBJECT-TYPE    
  DisplayString  

phyRxuHardwareVersion 1.3.6.1.4.1.8603.1.2.3.17.1.10
RXU hardware version.
OBJECT-TYPE    
  DisplayString  

phyRxuIpmiSwVersion 1.3.6.1.4.1.8603.1.2.3.17.1.11
RXU IPMI software version.
OBJECT-TYPE    
  DisplayString  

phyRxuAssemblyId 1.3.6.1.4.1.8603.1.2.3.17.1.12
RXU assembly ID.
OBJECT-TYPE    
  DisplayString  

phyRxuAssemblyIdSrc 1.3.6.1.4.1.8603.1.2.3.17.1.13
RXU assembly ID source.
OBJECT-TYPE    
  AssemblyIdSource  

phyRxuExcessiveFakeAid 1.3.6.1.4.1.8603.1.2.3.17.1.14
This object is true if the assembly ID is programmed under more than one source.
OBJECT-TYPE    
  TruthValue  

phyRxuAdminState 1.3.6.1.4.1.8603.1.2.3.17.1.20
RXU administrative state.
OBJECT-TYPE    
  AdminState  

phyRxuRfBand 1.3.6.1.4.1.8603.1.2.3.17.1.21
RXU RF band.
OBJECT-TYPE    
  RfBand  

phyTxuTable 1.3.6.1.4.1.8603.1.2.3.18
Tok_String
OBJECT-TYPE    
  SEQUENCE OF  
    PhyTxuEntry

phyTxuEntry 1.3.6.1.4.1.8603.1.2.3.18.1
Tok_String
OBJECT-TYPE    
  PhyTxuEntry  

phyTxuIndex 1.3.6.1.4.1.8603.1.2.3.18.1.1
TXU index.
OBJECT-TYPE    
  INTEGER  

phyTxuOpState 1.3.6.1.4.1.8603.1.2.3.18.1.2
TXU operational state.
OBJECT-TYPE    
  CardOpState  

phyTxuFaultLed 1.3.6.1.4.1.8603.1.2.3.18.1.3
TXU fault LED color.
OBJECT-TYPE    
  CardFaultLed  

phyTxuTempStatus 1.3.6.1.4.1.8603.1.2.3.18.1.4
TXU temperature status.
OBJECT-TYPE    
  CardTempStatus  

phyTxuVoltageStatus 1.3.6.1.4.1.8603.1.2.3.18.1.5
TXU voltage status.
OBJECT-TYPE    
  CardVoltageStatus  

phyTxuSerialNumber 1.3.6.1.4.1.8603.1.2.3.18.1.6
TXU serial number.
OBJECT-TYPE    
  DisplayString  

phyTxuProductionDate 1.3.6.1.4.1.8603.1.2.3.18.1.7
TXU production date.
OBJECT-TYPE    
  DisplayString  

phyTxuPartNumber 1.3.6.1.4.1.8603.1.2.3.18.1.8
TXU part number.
OBJECT-TYPE    
  DisplayString  

phyTxuDescription 1.3.6.1.4.1.8603.1.2.3.18.1.9
TXU description.
OBJECT-TYPE    
  DisplayString  

phyTxuHardwareVersion 1.3.6.1.4.1.8603.1.2.3.18.1.10
TXU hardware version.
OBJECT-TYPE    
  DisplayString  

phyTxuIpmiSwVersion 1.3.6.1.4.1.8603.1.2.3.18.1.11
TXU IPMI software version.
OBJECT-TYPE    
  DisplayString  

phyTxuAssemblyId 1.3.6.1.4.1.8603.1.2.3.18.1.12
TXU assembly ID.
OBJECT-TYPE    
  DisplayString  

phyTxuAssemblyIdSrc 1.3.6.1.4.1.8603.1.2.3.18.1.13
TXU assembly ID source.
OBJECT-TYPE    
  AssemblyIdSource  

phyTxuExcessiveFakeAid 1.3.6.1.4.1.8603.1.2.3.18.1.14
This object is true if the assembly ID is programmed under more than one source.
OBJECT-TYPE    
  TruthValue  

phyTxuAdminState 1.3.6.1.4.1.8603.1.2.3.18.1.20
TXU administrative state.
OBJECT-TYPE    
  AdminState  

phyTxuRfBand 1.3.6.1.4.1.8603.1.2.3.18.1.21
TXU RF band.
OBJECT-TYPE    
  RfBand  

paTable 1.3.6.1.4.1.8603.1.2.4.1
Tok_String
OBJECT-TYPE    
  SEQUENCE OF  
    PaEntry

paEntry 1.3.6.1.4.1.8603.1.2.4.1.1
Tok_String
OBJECT-TYPE    
  PaEntry  

paIndex 1.3.6.1.4.1.8603.1.2.4.1.1.1
Power Amp index.
OBJECT-TYPE    
  INTEGER  

paAdminState 1.3.6.1.4.1.8603.1.2.4.1.1.2
PA administrative state.
OBJECT-TYPE    
  AdminState  

paOpState 1.3.6.1.4.1.8603.1.2.4.1.1.3
PA operational state. This object is deprecated in favor of paOperStatus.
OBJECT-TYPE    
  CardOpState  

paTempStatus 1.3.6.1.4.1.8603.1.2.4.1.1.4
PA temperature status.
OBJECT-TYPE    
  CardTempStatus  

paOutputTxPower 1.3.6.1.4.1.8603.1.2.4.1.1.5
PA output transmit power, in dbm.
OBJECT-TYPE    
  FloatAsString  

paInputTxPower 1.3.6.1.4.1.8603.1.2.4.1.1.6
PA input transmit power, in dbm.
OBJECT-TYPE    
  FloatAsString  

paTxReflectedPower 1.3.6.1.4.1.8603.1.2.4.1.1.7
PA transmit reflected power, in dbm.
OBJECT-TYPE    
  FloatAsString  

paDcPowerFault 1.3.6.1.4.1.8603.1.2.4.1.1.8
This object indicates if a PA DC power fault exists.
OBJECT-TYPE    
  TruthValue  

paRfOverdriveFault 1.3.6.1.4.1.8603.1.2.4.1.1.9
This object indicates if a PA RF overdrive fault exists.
OBJECT-TYPE    
  TruthValue  

paFeedForwardFault 1.3.6.1.4.1.8603.1.2.4.1.1.10
This object indicates if a PA feed forward fault exists.
OBJECT-TYPE    
  TruthValue  

paSerialNumber 1.3.6.1.4.1.8603.1.2.4.1.1.11
PA serial number.
OBJECT-TYPE    
  DisplayString  

paRfBand 1.3.6.1.4.1.8603.1.2.4.1.1.12
PA RF band. This object is deprecated in favor of paRadioFreqBand.
OBJECT-TYPE    
  RfBand  

paHardwareVersion 1.3.6.1.4.1.8603.1.2.4.1.1.13
PA hardware version.
OBJECT-TYPE    
  DisplayString  

paTemperature 1.3.6.1.4.1.8603.1.2.4.1.1.14
PA temperature (Celcius).
OBJECT-TYPE    
  INTEGER  

paReflectedPowerFault 1.3.6.1.4.1.8603.1.2.4.1.1.15
This object indicates if a reflected power fault exists.
OBJECT-TYPE    
  TruthValue  

paUnderPowerFault 1.3.6.1.4.1.8603.1.2.4.1.1.16
This object indicates if an under power fault exists.
OBJECT-TYPE    
  TruthValue  

paTargetOutputTxPower 1.3.6.1.4.1.8603.1.2.4.1.1.17
PA target output Tx power.
OBJECT-TYPE    
  FloatAsString  

paOperStatus 1.3.6.1.4.1.8603.1.2.4.1.1.18
PA operational state.
OBJECT-TYPE    
  PaState  

paRadioFreqBand 1.3.6.1.4.1.8603.1.2.4.1.1.19
PA RF band.
OBJECT-TYPE    
  PaRfBand  

paFanSpeedOk 1.3.6.1.4.1.8603.1.2.4.2
This object indicates if the PA shelf fan speed is within normal operating limits.
OBJECT-TYPE    
  TruthValue  

paFanTempOk 1.3.6.1.4.1.8603.1.2.4.3
This object indicates if the PA shelf fan temperature is within normal operating limits.
OBJECT-TYPE    
  TruthValue  

paBreakerTripped 1.3.6.1.4.1.8603.1.2.4.4
This object indicates if a PA shelf breaker has been tripped.
OBJECT-TYPE    
  TruthValue  

paSimulcast 1.3.6.1.4.1.8603.1.2.4.5
This object indicates if the PA shelf supports simulcast.
OBJECT-TYPE    
  TruthValue  

paTxCalEnabled 1.3.6.1.4.1.8603.1.2.4.6
This object indicates if PX Gain control loop is enabled.
OBJECT-TYPE    
  TruthValue  

paPowerTable 1.3.6.1.4.1.8603.1.2.4.7
This table is used to display PA various Tx power values. These values are store on the system as floating point numbers, but since SNMP cannot display floating point numbers, this table will convert the values to integer.
OBJECT-TYPE    
  SEQUENCE OF  
    PaPowerEntry

paPowerEntry 1.3.6.1.4.1.8603.1.2.4.7.1
Tok_String
OBJECT-TYPE    
  PaPowerEntry  

paPowerIndex 1.3.6.1.4.1.8603.1.2.4.7.1.1
PA index.
OBJECT-TYPE    
  INTEGER  

paPowerTxOutput 1.3.6.1.4.1.8603.1.2.4.7.1.2
PA output Tx power. In order to retain precision in converting the floating point value into integer, the value is first multiplied by 100. For example 43.25dB will be represented as 4325.
OBJECT-TYPE    
  INTEGER  

paPowerTxInput 1.3.6.1.4.1.8603.1.2.4.7.1.3
PA input Tx power. In order to retain precision in converting the floating point value into integer, the value is first multiplied by 100. For example -50.75dB will be represented as -5075.
OBJECT-TYPE    
  INTEGER  

paPowerTxReflected 1.3.6.1.4.1.8603.1.2.4.7.1.4
PA reflected Tx power. In order to retain precision in converting the floating point value into integer, the value is first multiplied by 100. For example 21.00dB will be represented as 2100.
OBJECT-TYPE    
  INTEGER  

bbuSysTable 1.3.6.1.4.1.8603.1.2.1.2.5
Base Band Unit system information.
OBJECT-TYPE    
  SEQUENCE OF  
    BbuSysEntry

bbuSysEntry 1.3.6.1.4.1.8603.1.2.1.2.5.1
Base Band Unit system table entry.
OBJECT-TYPE    
  BbuSysEntry  

bbuSysId 1.3.6.1.4.1.8603.1.2.1.2.5.1.1
This identifies a single BBU in a basestation.
OBJECT-TYPE    
  INTEGER  

bbuDspVer 1.3.6.1.4.1.8603.1.2.1.2.5.1.2
The read-only statistic indicates the version number of the DSP software currently operational on the sector in question. It has the major.minor.micro notation.
OBJECT-TYPE    
  DisplayString  

bbuLlcVer 1.3.6.1.4.1.8603.1.2.1.2.5.1.3
The read-only statistic indicates the version number of the Link List Controller software/firmware currently operational on the sector in question. It has the major.minor notation.
OBJECT-TYPE    
  DisplayString  

bbuTxFpgaVer 1.3.6.1.4.1.8603.1.2.1.2.5.1.4
The read-only statistic indicates the version number of the Tx FPGA software/firmware currently operational on the sector in question. It has the major.minor notation.
OBJECT-TYPE    
  DisplayString  

bbuRxFpgaVer 1.3.6.1.4.1.8603.1.2.1.2.5.1.5
The read-only statistic indicates the version number of the Rx FPGA software/firmware currently operational on the sector in question. It has the major.minor notation.
OBJECT-TYPE    
  DisplayString  

bbuLdpcVer 1.3.6.1.4.1.8603.1.2.1.2.5.1.6
The read-only statistic indicates the version number of the LDPC encoder/decoder software/firmware currently operational on the sector in question. It has the major.minor notation.
OBJECT-TYPE    
  Unsigned32  

bbuRfChanNum 1.3.6.1.4.1.8603.1.2.1.2.5.1.50
The RF channel number, in conjunction with the bbuRffBand object defines the frequency of operation. The channel number follows well-known ITU numbering, and represents 50 kHz spacing. The step size depends on the band. In the 1.9 GHz band, the step size is 4 (200 kHz). Editable offline.
OBJECT-TYPE    
  INTEGER 0..2000  

bbuExtGainTx 1.3.6.1.4.1.8603.1.2.1.2.5.1.51
Represents the total external gain in the Tx path. Typically it equals PA gain minus any attenuators. The value is in dB * 32 (scaled by 32). E.g., default value is 43 dB, which is the PA gain, and is represented as 43*32 = 1376. This parameter is used to assist the mobile in making an access attempt at an appropriate power level. The step size is 1 dB. Editable online.
OBJECT-TYPE    
  INTEGER -1600..2240  

bbuExtGainRx 1.3.6.1.4.1.8603.1.2.1.2.5.1.52
Represents the total external gain in the Rx path. Typically it equals LNA gain minus any attenuators. The value is in dB * 32 (scaled by 32). E.g., default value is 31 dB, which is the LNA gain, and is represented as 31*32 = 992. This parameter is used to assist the mobile in making an access attempt at an appropriate power level. The step size is 1 dB. Editable online.
OBJECT-TYPE    
  INTEGER -1600..2240  

bbuRfGainRx0 1.3.6.1.4.1.8603.1.2.1.2.5.1.53
Represents the gain (in dB) provided by the RF Rx blade(RXU) in the Rx0 path. This gain is in addition to the gain provided by the LNA. This value is typically calibrated and set in the factory. The step size is 1 dB. Editable online.
OBJECT-TYPE    
  INTEGER -10..75  

bbuRfGainRx1 1.3.6.1.4.1.8603.1.2.1.2.5.1.54
Represents the gain (in dB) provided by the RF Rx blade(RXU) in the Rx1 path. This gain is in addition to the gain provided by the LNA. This value is typically calibrated and set in the factory. The step size is 1 dB. Editable online.
OBJECT-TYPE    
  INTEGER -10..75  

bbuRfBand 1.3.6.1.4.1.8603.1.2.1.2.5.1.55
The band of operation, represented by an enumeration. E.g., the 1.9 GHz PCS band has a value of 6, while the 2.1 GHz UMTS band has a value of 7. This quantity, in conjunction with the bbuRfChanNum decides the frequency of operation. Editable offline.
OBJECT-TYPE    
  INTEGER 0..255  

bbuRfPowerTx0 1.3.6.1.4.1.8603.1.2.1.2.5.1.56
Represents the signal strength in dBm of the Tx signal put out on Tx0 by the TXU. An increase in this implies an increase in the signal input to the PA. Step size is 1 dBm. Editable online.
OBJECT-TYPE    
  INTEGER -20..10  

bbuRfPowerTx1 1.3.6.1.4.1.8603.1.2.1.2.5.1.57
Represents the signal strength in dBm of the Tx signal put out on Tx1 by the TXU. An increase in this implies an increase in the signal input to the PA. Step size is 1 dBm. Editable online.
OBJECT-TYPE    
  INTEGER -20..10  

bbuRfuEnableMask 1.3.6.1.4.1.8603.1.2.1.2.5.1.59
This is a bit mask to choose between the 0 and 1 channels for Rx and Tx. The value should be an OR of the channels selected, where: Tx0 = 0001 Tx1 = 0010 Rx0 = 0100 Rx1 = 1000 For example, set this object to 6 if Rx0 and Tx1 need to be enabled.
OBJECT-TYPE    
  INTEGER 0..15  

bbuExtTxGain 1.3.6.1.4.1.8603.1.2.1.2.5.1.60
External Tx gain. Valid range is -50.0 to 70.0.
OBJECT-TYPE    
  FloatAsString  

bbuExtRxGain 1.3.6.1.4.1.8603.1.2.1.2.5.1.61
External Rx gain. Valid range is -50.0 to 70.0.
OBJECT-TYPE    
  FloatAsString  

bbuRfRx0Gain 1.3.6.1.4.1.8603.1.2.1.2.5.1.62
Represents the gain (in dB) provided by the RF Rx blade(RXU) in the Rx0 path. This gain is in addition to the gain provided by the LNA. This value is typically calibrated and set in the factory. The step size is 1 dB. Valid range is -10.0 to 75.0. Editable online.
OBJECT-TYPE    
  FloatAsString  

bbuRfRx1Gain 1.3.6.1.4.1.8603.1.2.1.2.5.1.63
Represents the gain (in dB) provided by the RF Rx blade(RXU) in the Rx1 path. This gain is in addition to the gain provided by the LNA. This value is typically calibrated and set in the factory. The step size is 1 dB. Valid range is -10.0 to 75.0. Editable online.
OBJECT-TYPE    
  FloatAsString  

bbuRfTx0Power 1.3.6.1.4.1.8603.1.2.1.2.5.1.64
Represents the signal strength in dBm of the Tx signal put out on Tx0 by the TXU. An increase in this implies an increase in the signal input to the PA. Step size is 1 dBm. Valid range is -20.0 to 10.0. Editable online.
OBJECT-TYPE    
  FloatAsString  

bbuRfTx1Power 1.3.6.1.4.1.8603.1.2.1.2.5.1.65
Represents the signal strength in dBm of the Tx signal put out on Tx1 by the TXU. An increase in this implies an increase in the signal input to the PA. Step size is 1 dBm. Valid range is -20.0 to 10.0. Editable online.
OBJECT-TYPE    
  FloatAsString  

bbuTxPwrDeviationLimit 1.3.6.1.4.1.8603.1.2.1.2.5.1.66
Tok_String
OBJECT-TYPE    
  INTEGER 1..10  

bbuSlope 1.3.6.1.4.1.8603.1.2.1.2.5.1.70
Represents the slope of the RR sector. It is an identifier which allows a mobile to distinguish between signals from different basestations. There are 112 possible slope values, however, only 80 of these are considered valid values. Editable offline.
OBJECT-TYPE    
  INTEGER 1..112  

bbuMcastSnr 1.3.6.1.4.1.8603.1.2.1.2.5.1.71
Tok_String
OBJECT-TYPE    
  INTEGER -20..35  

bbuScmType 1.3.6.1.4.1.8603.1.2.1.2.5.1.72
Tok_String
OBJECT-TYPE    
  INTEGER 0..1  

bbuSleepInactivityTimer 1.3.6.1.4.1.8603.1.2.1.2.5.1.91
Represents the amount of time of data inactivity (on the forward or reverse links) after which a mobile moves to the Sleep state. In units of 1/3 seconds [ eg. Value = 180 represents 60 seconds]. This time period is conveyed to the mobile at the time of establishing connectivity with the basestation. This quantity is non-linearly quantized, so the actual duration of inactivity before sleep may be slightly different from this value. Step size is 1/3 second. Range is 0 to 20 minutes. 0 means never go to sleep. Recommended value is 180 (i.e., 60sec). Editable online.
OBJECT-TYPE    
  INTEGER 0..3600  

bbuLuTimer 1.3.6.1.4.1.8603.1.2.1.2.5.1.100
Periodicity, in seconds, of location update done by a stationary mobile. This time period is conveyed to the mobile at the time of establishing connectivity with the RR. This quantity is non-linearly quantized, so the actual duration of location update may be slightly different from this value. Step size is 1 second. Range is 5 seconds to 18 hours. Editable online.
OBJECT-TYPE    
  INTEGER 0..86400