ES-GroupManagement-MIB

File: ES-GroupManagement-MIB.mib (15190 bytes)

Imported modules

SNMPv2-TC SNMPv2-SMI

Imported symbols

RowStatus TEXTUAL-CONVENTION OBJECT-TYPE
Integer32 IpAddress Unsigned32
enterprises

Defined Types

MacAddress  
Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first.
TEXTUAL-CONVENTION    
  OCTET STRING  

DpPortEntry  
SEQUENCE    
  dpPortId Integer32
  dpPortAdminStatus INTEGER

DpTrunkEntry  
SEQUENCE    
  dpTrunkId Integer32
  dpTrunkAdminStatus INTEGER

TpPortEntry  
SEQUENCE    
  tpPortId Integer32
  tpPortAdminStatus INTEGER

TpTrunkEntry  
SEQUENCE    
  tpTrunkId Integer32
  tpTrunkAdminStatus INTEGER

TpDeviceEntry  
SEQUENCE    
  deviceMac MacAddress
  deviceId Integer32
  deviceIpAddr IpAddress
  deviceHop Integer32
  devicePlatform OCTET STRING
  deviceRole INTEGER
  devicePeerPort OCTET STRING
  deviceBelongedMac MacAddress
  deviceBelongedIpAddr IpAddress

MemberEntry  
SEQUENCE    
  memMac MacAddress
  memId Integer32
  memIpAddr IpAddress
  memMask IpAddress
  memStatus INTEGER
  memRole INTEGER
  snmpPortMap Unsigned32
  httpPortMap Integer32
  ftpPortMap Integer32
  tftpPortMap Integer32
  telnetPortMap Integer32
  sshPortMap Integer32

Defined Values

zte 1.3.6.1.4.1.3902
OBJECT IDENTIFIER    

ethernetSwitch 1.3.6.1.4.1.3902.15
OBJECT IDENTIFIER    

groupManagement 1.3.6.1.4.1.3902.15.4
OBJECT IDENTIFIER    

groupParam 1.3.6.1.4.1.3902.15.4.1
OBJECT IDENTIFIER    

neighborDiscovery 1.3.6.1.4.1.3902.15.4.2
OBJECT IDENTIFIER    

topologyCollect 1.3.6.1.4.1.3902.15.4.3
OBJECT IDENTIFIER    

memberManage 1.3.6.1.4.1.3902.15.4.4
OBJECT IDENTIFIER    

gmEnterpriseTrap 1.3.6.1.4.1.3902.15.4.5
OBJECT IDENTIFIER    

gmHandtime 1.3.6.1.4.1.3902.15.4.1.1
Group member shakehand timer interval
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..300  

gmHoldtime 1.3.6.1.4.1.3902.15.4.1.2
Group member shakehand hold timer interval. This item only for command switch.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..300  

gmName 1.3.6.1.4.1.3902.15.4.1.3
Group descriptive name. This item only for command switch.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

gmSwitchRole 1.3.6.1.4.1.3902.15.4.1.4
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER commandSwitch(1), memberSwitch(2), candidateSwitch(3), independentSwitch(4)  

gmIpPool 1.3.6.1.4.1.3902.15.4.1.5
the format of this item is xx/xx.xx.xx.xx/xx. Among this string, the first segment represents layer 3 ipport number, the second segment represents layer 3 ipAddress, the third segment represents net mask. eg: 12/192.168.2.8/24. Command switch and member switch can't set this item.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

tftpServerIpAddr 1.3.6.1.4.1.3902.15.4.1.6
Get/set tftp server ip address for the group. This item only for command switch.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

belongedCmdMac 1.3.6.1.4.1.3902.15.4.1.7
This item only for member switch. It indicates the command switch mac address of the group which this member switch belonged to.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

dpAdminStatus 1.3.6.1.4.1.3902.15.4.2.1
Enable/disable neighbor discovery function.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

dpTimer 1.3.6.1.4.1.3902.15.4.2.2
Description
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 5..254  

dpHoldtime 1.3.6.1.4.1.3902.15.4.2.3
Description
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..255  

dpPortTable 1.3.6.1.4.1.3902.15.4.2.4
Description
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DpPortEntry

dpPortEntry 1.3.6.1.4.1.3902.15.4.2.4.1
Row Description
Status: current Access: not-accessible
OBJECT-TYPE    
  DpPortEntry  

dpPortId 1.3.6.1.4.1.3902.15.4.2.4.1.1
Column Description
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

dpPortAdminStatus 1.3.6.1.4.1.3902.15.4.2.4.1.2
Column Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

dpTrunkTable 1.3.6.1.4.1.3902.15.4.2.5
Description
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DpTrunkEntry

dpTrunkEntry 1.3.6.1.4.1.3902.15.4.2.5.1
Row Description
Status: current Access: not-accessible
OBJECT-TYPE    
  DpTrunkEntry  

dpTrunkId 1.3.6.1.4.1.3902.15.4.2.5.1.1
Column Description
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

dpTrunkAdminStatus 1.3.6.1.4.1.3902.15.4.2.5.1.2
Column Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

tpAdminStatus 1.3.6.1.4.1.3902.15.4.3.1
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

tpVlan 1.3.6.1.4.1.3902.15.4.3.2
The value of this item can't be changed while gmSwitchRole is commandSwitch
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4094  

tpHop 1.3.6.1.4.1.3902.15.4.3.3
Description
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..128  

tpTimer 1.3.6.1.4.1.3902.15.4.3.4
Description
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

tpHopDelay 1.3.6.1.4.1.3902.15.4.3.5
Description
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..1000  

tpPortDelay 1.3.6.1.4.1.3902.15.4.3.6
Description
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..1000  

tpStart 1.3.6.1.4.1.3902.15.4.3.7
The value get from this item is insignificant. Setting this item will start a topology collection process.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER start(1)  

tpPortTable 1.3.6.1.4.1.3902.15.4.3.8
Description
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TpPortEntry

tpPortEntry 1.3.6.1.4.1.3902.15.4.3.8.1
Each entry contains port config for topology
Status: current Access: not-accessible
OBJECT-TYPE    
  TpPortEntry  

tpPortId 1.3.6.1.4.1.3902.15.4.3.8.1.1
The port id to index topology collection.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

tpPortAdminStatus 1.3.6.1.4.1.3902.15.4.3.8.1.2
Enable/disable topology collection on certain port
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

tpTrunkTable 1.3.6.1.4.1.3902.15.4.3.9
Description
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TpTrunkEntry

tpTrunkEntry 1.3.6.1.4.1.3902.15.4.3.9.1
Each row contains trunk config for topology
Status: current Access: not-accessible
OBJECT-TYPE    
  TpTrunkEntry  

tpTrunkId 1.3.6.1.4.1.3902.15.4.3.9.1.1
Trunk id.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

tpTrunkAdminStatus 1.3.6.1.4.1.3902.15.4.3.9.1.2
Enable/disable topology collection on certain trunk
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

tpDeviceTable 1.3.6.1.4.1.3902.15.4.3.10
Device in the network topology.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TpDeviceEntry

tpDeviceEntry 1.3.6.1.4.1.3902.15.4.3.10.1
Each row contains a device info that was collected
Status: current Access: not-accessible
OBJECT-TYPE    
  TpDeviceEntry  

deviceMac 1.3.6.1.4.1.3902.15.4.3.10.1.1
Device mac address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

deviceId 1.3.6.1.4.1.3902.15.4.3.10.1.2
Device id.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -2147483648..2147483647  

deviceIpAddr 1.3.6.1.4.1.3902.15.4.3.10.1.3
Column Description
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

deviceHop 1.3.6.1.4.1.3902.15.4.3.10.1.4
Column Description
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

devicePlatform 1.3.6.1.4.1.3902.15.4.3.10.1.5
The device type, running platform.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

deviceRole 1.3.6.1.4.1.3902.15.4.3.10.1.6
The value indicates the switch role in the topology, But only command switch can set value of this item. Furthermore, only memberSwitch ( 2 ) can be set which means adding a device of the topology to the group.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER commandSwitch(1), memberSwitch(2), candidateSwitch(3), independentSwitch(4)  

devicePeerPort 1.3.6.1.4.1.3902.15.4.3.10.1.7
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

deviceBelongedMac 1.3.6.1.4.1.3902.15.4.3.10.1.8
It indicates the command switch mac address of the group which this device belonged to. If the device role is not member switch, the item value is the device sysmac.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

deviceBelongedIpAddr 1.3.6.1.4.1.3902.15.4.3.10.1.9
It indicates the command switch ip address of the group which this device belonged to. If the device role is not member switch, the item value is 0.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

memberTable 1.3.6.1.4.1.3902.15.4.4.1
Only command switch can have a memberTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MemberEntry

memberEntry 1.3.6.1.4.1.3902.15.4.4.1.1
Each row contains all of the info of a member of a group which managed by this command switch
Status: current Access: not-accessible
OBJECT-TYPE    
  MemberEntry  

memMac 1.3.6.1.4.1.3902.15.4.4.1.1.1
Column Description
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

memId 1.3.6.1.4.1.3902.15.4.4.1.1.2
Column Description
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

memIpAddr 1.3.6.1.4.1.3902.15.4.4.1.1.3
Column Description
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

memMask 1.3.6.1.4.1.3902.15.4.4.1.1.4
Column Description
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

memStatus 1.3.6.1.4.1.3902.15.4.4.1.1.5
Column Description
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

memRole 1.3.6.1.4.1.3902.15.4.4.1.1.6
When set memRole as candidateSwitch(2), this member will be delete from the group
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER memberSwitch(1), candidateSwitch(2)  

snmpPortMap 1.3.6.1.4.1.3902.15.4.4.1.1.7
Well-known port mapping to private port by memId.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

httpPortMap 1.3.6.1.4.1.3902.15.4.4.1.1.8
Column Description
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -2147483648..2147483647  

ftpPortMap 1.3.6.1.4.1.3902.15.4.4.1.1.9
Description
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -2147483648..2147483647  

tftpPortMap 1.3.6.1.4.1.3902.15.4.4.1.1.10
Description
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -2147483648..2147483647  

telnetPortMap 1.3.6.1.4.1.3902.15.4.4.1.1.11
Description
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sshPortMap 1.3.6.1.4.1.3902.15.4.4.1.1.12
Description
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gmTopologyChange 1.3.6.1.4.1.3902.15.4.5.1
This trap sended by command switch to notify topology change.
Status: current Access: read-only
NOTIFICATION-TYPE    

gmMemberUpDown 1.3.6.1.4.1.3902.15.4.5.2
The trap indicates nms that member switch transfer between connect or disconnect with command switch.
Status: current Access: read-only
NOTIFICATION-TYPE