ERICSSON-ROUTER-L2VPN-MIB

File: ERICSSON-ROUTER-L2VPN-MIB.mib (60046 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-CONF	SNMPv2-TC
ERICSSON-ROUTER-TC	SNMP-FRAMEWORK-MIB	IF-MIB
ERICSSON-ROUTER-SMI	INET-ADDRESS-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	Unsigned32
IpAddress	Integer32	NOTIFICATION-TYPE
MODULE-COMPLIANCE	OBJECT-GROUP	NOTIFICATION-GROUP
TEXTUAL-CONVENTION	TruthValue	EriRouterCircuitHandle
SnmpAdminString	InterfaceIndexOrZero	eriRouterMgmt
InetAddressType	InetAddress	InetPortNumber

Defined Types

EriRouterVpnVcType
Layer 2 VPN VC types.
TEXTUAL-CONVENTION
	INTEGER	unknown(0), frame(1), aal5(2), atmTransCell(3), vlan(4), ethernet(5), hdlc(6), ppp(7), cem(8), atmVccCell(9), atmVpcCell(10)

EriRouterVpnXcFlagsType
Layer 2 VPN Cross connect flag values.
TEXTUAL-CONVENTION
	BITS	none(0), inRib(1), deletingSignal(2), deletingConfig(3), inLblmap(4), updating(5), up(6), inLdp(7), fromLdp(8), fromConfig(9), stale(10), expSet(11), ismUp(12), peerUp(13), remoteEncap(14), localCbit(15), remoteCbit(16), primary(17), backup(18), primaryAutoRevert(19), standby(20), cwMismatch(21), sigParamsMatch(22)

EriRouterVpnPwFlagsType
Layer 2 VPN Pesudowire (PW) flag values.
TEXTUAL-CONVENTION
	BITS	none(0), inRib(1), deletingSignal(2), deletingConfig(3), inLblmap(4), updating(5), up(6), inLdp(7), fromLdp(8), fromConfig(9), stale(10), expSet(11), ismUp(12), peerUp(13), remoteEncap(14), localCbit(15), remoteCbit(16), primary(17), backup(18), primaryAutoRevert(19), standby(20), cwMismatch(21), sigParamsMatch(22), encapError(23)

EriRouterVpnPwStateType
Layer 2 VPN Cross connect (XC) state.
TEXTUAL-CONVENTION
	INTEGER	unknown(0), up(1), down(2), standby(3)

EriRouterVpnPsnType
Layer 2 VPN packet switched network(PSN) type.
TEXTUAL-CONVENTION
	INTEGER	unknown(0), ip(1), ipsec(2), mpls(3)

EriRouterMplsL2VpnStaticEntry
SEQUENCE
	eriRouterMplsL2VpnStaticInLabel	Unsigned32
	eriRouterMplsL2VpnStaticPeerAddr	IpAddress
	eriRouterMplsL2VpnStaticCctHandle	EriRouterCircuitHandle
	eriRouterMplsL2VpnStaticVpnCctHandle	EriRouterCircuitHandle
	eriRouterMplsL2VpnStaticExpBits	Unsigned32
	eriRouterMplsL2VpnStaticInputCctUp	TruthValue
	eriRouterMplsL2VpnStaticXcFlags	EriRouterVpnXcFlagsType
	eriRouterMplsL2VpnStaticIfIndexOrZero	InterfaceIndexOrZero
	eriRouterMplsL2VpnStaticPwFlags	EriRouterVpnPwFlagsType
	eriRouterMplsL2VpnStaticPwState	EriRouterVpnPwStateType
	eriRouterMplsL2VpnStaticVpnLabel	Unsigned32

EriRouterMplsL2VpnLdpEntry
SEQUENCE
	eriRouterMplsL2VpnLdpVcId	Unsigned32
	eriRouterMplsL2VpnLdpPeerAddr	IpAddress
	eriRouterMplsL2VpnLdpCctHandle	EriRouterCircuitHandle
	eriRouterMplsL2VpnLdpVpnCctHandle	EriRouterCircuitHandle
	eriRouterMplsL2VpnLdpInLabel	Unsigned32
	eriRouterMplsL2VpnLdpVpnLabel	Unsigned32
	eriRouterMplsL2VpnLdpRemGrpId	Unsigned32
	eriRouterMplsL2VpnLdpLocEncap	SnmpAdminString
	eriRouterMplsL2VpnLdpRemEncap	SnmpAdminString
	eriRouterMplsL2VpnLdpLocVcType	EriRouterVpnVcType
	eriRouterMplsL2VpnLdpRemVcType	EriRouterVpnVcType
	eriRouterMplsL2VpnLdpLocMtu	Unsigned32
	eriRouterMplsL2VpnLdpRemMtu	Unsigned32
	eriRouterMplsL2VpnLdpXcCctUp	TruthValue
	eriRouterMplsL2VpnLdpExpBits	Unsigned32
	eriRouterMplsL2VpnLdpInputCctUp	TruthValue
	eriRouterMplsL2VpnLdpXcFlags	EriRouterVpnXcFlagsType
	eriRouterMplsL2VpnLdpIfIndexOrZero	InterfaceIndexOrZero
	eriRouterMplsL2VpnLdpPwFlags	EriRouterVpnPwFlagsType
	eriRouterMplsL2VpnLdpPwState	EriRouterVpnPwStateType

EriRouterUdpL2VpnStaticEntry
SEQUENCE
	eriRouterUdpL2VpnStaticPeerPort	InetPortNumber
	eriRouterUdpL2VpnStaticPeerAddressType	InetAddressType
	eriRouterUdpL2VpnStaticPeerAddress	InetAddress
	eriRouterUdpL2VpnStaticSourceAddressType	InetAddressType
	eriRouterUdpL2VpnStaticSourceAddress	InetAddress
	eriRouterUdpL2VpnStaticSourcePort	InetPortNumber
	eriRouterUdpL2vpnStaticAccessCctHandle	EriRouterCircuitHandle
	eriRouterUdpL2VpnStaticVpnCctHandle	EriRouterCircuitHandle
	eriRouterUdpL2VpnStaticInputCctUp	TruthValue
	eriRouterUdpL2VpnStaticIfIndexOrZero	InterfaceIndexOrZero
	eriRouterUdpL2VpnStaticPwFlags	EriRouterVpnPwFlagsType
	eriRouterUdpL2VpnStaticPwState	EriRouterVpnPwStateType
	eriRouterUdpL2vpnStaticDscpCode	INTEGER
	eriRouterUdpL2VpnStaticPsnType	EriRouterVpnPsnType

EriRouterL2VpnStaticEntry
SEQUENCE
	eriRouterL2VpnStaticPeerAddr	IpAddress
	eriRouterL2VpnStaticVpnLabel	Unsigned32
	eriRouterL2VpnStaticCctHandle	EriRouterCircuitHandle
	eriRouterL2VpnStaticVpnCctHandle	EriRouterCircuitHandle
	eriRouterL2VpnStaticExpBits	Unsigned32
	eriRouterL2VpnStaticInputCctUp	TruthValue
	eriRouterL2VpnStaticXcFlags	EriRouterVpnXcFlagsType
	eriRouterL2VpnStaticIfIndexOrZero	InterfaceIndexOrZero

EriRouterL2VpnLdpEntry
SEQUENCE
	eriRouterL2VpnLdpPeerAddr	IpAddress
	eriRouterL2VpnLdpVcId	Integer32
	eriRouterL2VpnLdpCctHandle	EriRouterCircuitHandle
	eriRouterL2VpnLdpVpnCctHandle	EriRouterCircuitHandle
	eriRouterL2VpnLdpInLabel	Unsigned32
	eriRouterL2VpnLdpVpnLabel	Unsigned32
	eriRouterL2VpnLdpRemGrpId	Unsigned32
	eriRouterL2VpnLdpLocEncap	SnmpAdminString
	eriRouterL2VpnLdpRemEncap	SnmpAdminString
	eriRouterL2VpnLdpLocVcType	EriRouterVpnVcType
	eriRouterL2VpnLdpRemVcType	EriRouterVpnVcType
	eriRouterL2VpnLdpLocMtu	Unsigned32
	eriRouterL2VpnLdpRemMtu	Unsigned32
	eriRouterL2VpnLdpXcCctUp	TruthValue
	eriRouterL2VpnLdpExpBits	Unsigned32
	eriRouterL2VpnLdpInputCctUp	TruthValue
	eriRouterL2VpnLdpXcFlags	EriRouterVpnXcFlagsType
	eriRouterL2VpnLdpIfIndexOrZero	InterfaceIndexOrZero

Defined Values

eriRouterL2VpnMIB		1.3.6.1.4.1.193.218.2.39
This management information base displays Layer 2 Virtual Private Networks(VPN) / Pesudowires(PWs) information.
MODULE-IDENTITY

eriRouterMplsL2VpnMIBNotifications		1.3.6.1.4.1.193.218.2.39.0
OBJECT IDENTIFIER

eriRouterL2VpnMIBObjects		1.3.6.1.4.1.193.218.2.39.1
OBJECT IDENTIFIER

eriRouterL2VpnMIBConformance		1.3.6.1.4.1.193.218.2.39.2
OBJECT IDENTIFIER

eriRouterMplsL2VpnMIBObjects		1.3.6.1.4.1.193.218.2.39.3
OBJECT IDENTIFIER

eriRouterMplsL2VpnMIBConformance		1.3.6.1.4.1.193.218.2.39.4
OBJECT IDENTIFIER

eriRouterMplsL2VpnMIBScalars		1.3.6.1.4.1.193.218.2.39.5
OBJECT IDENTIFIER

eriRouterUdpL2VpnMIBObjects		1.3.6.1.4.1.193.218.2.39.6
OBJECT IDENTIFIER

eriRouterMplsL2VpnNotificationEnable		1.3.6.1.4.1.193.218.2.39.5.1
If this object is true, then it enables the generation of all notifications defined in this MIB. This object's value should be preserved across agent reboots.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

eriRouterMplsL2VpnStaticTable		1.3.6.1.4.1.193.218.2.39.3.3
This table contains objects which identify static Layer 2 VPN circuits. With respect to creation and deletion of entries in this table, rows are created or deleted when the VPN circuit is configured.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EriRouterMplsL2VpnStaticEntry

eriRouterMplsL2VpnStaticEntry		1.3.6.1.4.1.193.218.2.39.3.3.1
A conceptual row in the eriRouterMplsL2VpnStaticTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	EriRouterMplsL2VpnStaticEntry

eriRouterMplsL2VpnStaticInLabel		1.3.6.1.4.1.193.218.2.39.3.3.1.1
This object indicates the value used by the remote connection in order to identify this VPN circuit when communicating with the label manager (Label allocated in the local node)
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	4096..65535

eriRouterMplsL2VpnStaticPeerAddr		1.3.6.1.4.1.193.218.2.39.3.3.1.2
This object indicates the ip address of the VPN peer.
Status: current	Access: not-accessible
OBJECT-TYPE
	IpAddress

eriRouterMplsL2VpnStaticCctHandle		1.3.6.1.4.1.193.218.2.39.3.3.1.3
This object indicates the internal representation of the physical circuit to which this VPN is connected. A hexadecimal value of ff ff ff ff ff ff ff ff indicates an invalid circuit.
Status: current	Access: read-only
OBJECT-TYPE
	EriRouterCircuitHandle

eriRouterMplsL2VpnStaticVpnCctHandle		1.3.6.1.4.1.193.218.2.39.3.3.1.4
This object indicates the internal representation of VPN pseudo circuit.
Status: current	Access: read-only
OBJECT-TYPE
	EriRouterCircuitHandle

eriRouterMplsL2VpnStaticExpBits		1.3.6.1.4.1.193.218.2.39.3.3.1.5
This object indicates the number of exp bits configured for this VPN circuit.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

eriRouterMplsL2VpnStaticInputCctUp		1.3.6.1.4.1.193.218.2.39.3.3.1.6
This object indicates the status of the VPN attachment circuit. A value of true indicates that the VPN attachment circuit is connected with its remote site. A value of false indicates that the remote site is not presently connected.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

eriRouterMplsL2VpnStaticXcFlags		1.3.6.1.4.1.193.218.2.39.3.3.1.7
This object indicates more detailed information on the status of the VPN circuit. This object is a bit field so it may contain one or more of these values.
Status: current	Access: read-only
OBJECT-TYPE
	EriRouterVpnXcFlagsType

eriRouterMplsL2VpnStaticIfIndexOrZero		1.3.6.1.4.1.193.218.2.39.3.3.1.8
This object indicates whether there is a corresponding entry in the ifTable. A non-zero value indicates the ifIndex of the entry in the ifTable. A value of zero indicates that there is no entry.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceIndexOrZero

eriRouterMplsL2VpnStaticPwFlags		1.3.6.1.4.1.193.218.2.39.3.3.1.9
This object indicates more detailed information on the status of the VPN circuit. This object is a bit field so it may contain one or more of these values.
Status: current	Access: read-only
OBJECT-TYPE
	EriRouterVpnPwFlagsType

eriRouterMplsL2VpnStaticPwState		1.3.6.1.4.1.193.218.2.39.3.3.1.10
This object indicates the status of the VPN input circuit. A value of up(1) indicates that the VPN circuit is active i.e. connected with its remote site. A value of down(2) indicates that the remote site is not presently connected. A value of standby(3) indicates the the PW is in pending state to become active(i.e. up)
Status: current	Access: read-only
OBJECT-TYPE
	EriRouterVpnPwStateType

eriRouterMplsL2VpnStaticVpnLabel		1.3.6.1.4.1.193.218.2.39.3.3.1.11
This object indicates the unique value assigned to a particular static VPN circuit (Label allocated in the remote node)
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

eriRouterMplsL2VpnLdpTable		1.3.6.1.4.1.193.218.2.39.3.4
This table contains objects which identify Layer Distribution Protocol Layer 2 VPN circuits. With respect to creation and deletion of entries in this table, rows are created or deleted when the VPN circuit is configured.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EriRouterMplsL2VpnLdpEntry

eriRouterMplsL2VpnLdpEntry		1.3.6.1.4.1.193.218.2.39.3.4.1
A conceptual row in the eriRouterMplsL2VpnLdpTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	EriRouterMplsL2VpnLdpEntry

eriRouterMplsL2VpnLdpVcId		1.3.6.1.4.1.193.218.2.39.3.4.1.1
This object indicates the unique virtual VPN circuit id assigned to this circuit.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	0..4294967295

eriRouterMplsL2VpnLdpPeerAddr		1.3.6.1.4.1.193.218.2.39.3.4.1.2
This object indicates the ip address if the VPN peer.
Status: current	Access: not-accessible
OBJECT-TYPE
	IpAddress

eriRouterMplsL2VpnLdpCctHandle		1.3.6.1.4.1.193.218.2.39.3.4.1.3
This object indicates the internal representation of the physical circuit to which this VPN is connected. A hexadecimal value of ff ff ff ff ff ff ff ff indicates an invalid circuit.
Status: current	Access: read-only
OBJECT-TYPE
	EriRouterCircuitHandle

eriRouterMplsL2VpnLdpVpnCctHandle		1.3.6.1.4.1.193.218.2.39.3.4.1.4
This object indicates the internal representation of the VPN pseudo circuit.
Status: current	Access: read-only
OBJECT-TYPE
	EriRouterCircuitHandle

eriRouterMplsL2VpnLdpInLabel		1.3.6.1.4.1.193.218.2.39.3.4.1.5
This object indicates the value used by the remote connection in order to identify this VPN circuit when communicating with the local manager.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

eriRouterMplsL2VpnLdpVpnLabel		1.3.6.1.4.1.193.218.2.39.3.4.1.6
This object indicates the value setup in the local configuration to identify this VPN circuit.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

eriRouterMplsL2VpnLdpRemGrpId		1.3.6.1.4.1.193.218.2.39.3.4.1.7
This object indicates the remote group of which this VPN circuit is a part.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

eriRouterMplsL2VpnLdpLocEncap		1.3.6.1.4.1.193.218.2.39.3.4.1.8
This object indicates the local encaps type associated with this VPN circuit.
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString	Size(0..80)

eriRouterMplsL2VpnLdpRemEncap		1.3.6.1.4.1.193.218.2.39.3.4.1.9
This object indicates the remote encaps type associated with this VPN circuit.
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString	Size(0..80)

eriRouterMplsL2VpnLdpLocVcType		1.3.6.1.4.1.193.218.2.39.3.4.1.10
This object indicates the type of virtual circuit on the local system.
Status: current	Access: read-only
OBJECT-TYPE
	EriRouterVpnVcType

eriRouterMplsL2VpnLdpRemVcType		1.3.6.1.4.1.193.218.2.39.3.4.1.11
This object indicates the type of virtual circuit on the remote system.
Status: current	Access: read-only
OBJECT-TYPE
	EriRouterVpnVcType

eriRouterMplsL2VpnLdpLocMtu		1.3.6.1.4.1.193.218.2.39.3.4.1.12
This object indicates the maximum transmission unit of the local VPN circuit.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

eriRouterMplsL2VpnLdpRemMtu		1.3.6.1.4.1.193.218.2.39.3.4.1.13
This object indicates the maximum transmission unit of the remote connection.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

eriRouterMplsL2VpnLdpXcCctUp		1.3.6.1.4.1.193.218.2.39.3.4.1.14
This object indicates the status of the VPN cross connect circuit state. A value of true indicates that the VPN circuit is connected with its remote site and attachment circuit is up (eriRouterMplsL2VpnLdpInputCctUp is true). A value of false indicates that the remote site is not presently connected, this mean that either the PSN is not reachable or the attachment circuit is down or signaling parameters mismatched.
Status: deprecated	Access: read-only
OBJECT-TYPE
	TruthValue

eriRouterMplsL2VpnLdpExpBits		1.3.6.1.4.1.193.218.2.39.3.4.1.15
This object indicates the number of exp bits configured for this VPN circuit.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

eriRouterMplsL2VpnLdpInputCctUp		1.3.6.1.4.1.193.218.2.39.3.4.1.16
This object indicates the status of the VPN attachment circuit. A value of true indicates that the VPN attachment circuit is up. A value of false indicates the attachment circuit state is down.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

eriRouterMplsL2VpnLdpXcFlags		1.3.6.1.4.1.193.218.2.39.3.4.1.17
This object indicates more detailed information on the status of the VPN circuit. This object is a bit field so it may contain one or more of these values.
Status: deprecated	Access: read-only
OBJECT-TYPE
	EriRouterVpnXcFlagsType

eriRouterMplsL2VpnLdpIfIndexOrZero		1.3.6.1.4.1.193.218.2.39.3.4.1.18
This object indicates whether there is a corresponding entry in the ifTable. A non-zero value indicates the ifIndex of the entry in the ifTable. A value of zero indicates that there is no entry.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceIndexOrZero

eriRouterMplsL2VpnLdpPwFlags		1.3.6.1.4.1.193.218.2.39.3.4.1.19
This object indicates more detailed information on the status of the VPN circuit. This object is a bit field so it may contain one or more of these values.
Status: current	Access: read-only
OBJECT-TYPE
	EriRouterVpnPwFlagsType

eriRouterMplsL2VpnLdpPwState		1.3.6.1.4.1.193.218.2.39.3.4.1.20
This object indicates the status of the VPN input circuit. A value of up(1) indicates that the VPN circuit is active i.e. connected with its remote site. A value of down(2) indicates that the remote site is not presently connected. A value of standby(3) indicates the the PW is in pending state to become active(i.e. up)
Status: current	Access: read-only
OBJECT-TYPE
	EriRouterVpnPwStateType

eriRouterUdpL2VpnStaticTable		1.3.6.1.4.1.193.218.2.39.6.1
This table contains objects which identify static UDP Layer 2 VPN circuits. With respect to creation and deletion of entries in this table, rows are created or deleted when the VPN circuit is configured.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EriRouterUdpL2VpnStaticEntry

eriRouterUdpL2VpnStaticEntry		1.3.6.1.4.1.193.218.2.39.6.1.1
A conceptual row in the eriRouterUdpL2VpnStaticTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	EriRouterUdpL2VpnStaticEntry

eriRouterUdpL2VpnStaticPeerPort		1.3.6.1.4.1.193.218.2.39.6.1.1.1
This object indicates the peer port number for this UDP L2 VPN circuit.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetPortNumber

eriRouterUdpL2VpnStaticPeerAddressType		1.3.6.1.4.1.193.218.2.39.6.1.1.2
This object indicates the peer IP address type for this UDP L2 VPN circuit.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressType

eriRouterUdpL2VpnStaticPeerAddress		1.3.6.1.4.1.193.218.2.39.6.1.1.3
This object indicates the peer IP address for this UDP L2 VPN circuit. The peer address type is determined by the value of the corresponding eriRouterUdpL2VpnStaticPeerAddressType.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddress

eriRouterUdpL2VpnStaticSourceAddressType		1.3.6.1.4.1.193.218.2.39.6.1.1.4
This object indicates the source IP address type for this UDP L2 VPN circuit.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressType

eriRouterUdpL2VpnStaticSourceAddress		1.3.6.1.4.1.193.218.2.39.6.1.1.5
This object indicates the source IP address for this UDP L2 VPN circuit. The source address type is determined by the value of the corresponding eriRouterUdpL2VpnStaticSourceAddressType.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress

eriRouterUdpL2VpnStaticSourcePort		1.3.6.1.4.1.193.218.2.39.6.1.1.6
This object indicates the source port number for this UDP L2 VPN circuit.
Status: current	Access: read-only
OBJECT-TYPE
	InetPortNumber

eriRouterUdpL2vpnStaticAccessCctHandle		1.3.6.1.4.1.193.218.2.39.6.1.1.7
This object indicates the internal representation of the access circuit for this UDP L2 VPN circuit.
Status: current	Access: read-only
OBJECT-TYPE
	EriRouterCircuitHandle

eriRouterUdpL2VpnStaticVpnCctHandle		1.3.6.1.4.1.193.218.2.39.6.1.1.8
This object indicates the internal representation of this UDP L2 VPN circuit.
Status: current	Access: read-only
OBJECT-TYPE
	EriRouterCircuitHandle

eriRouterUdpL2VpnStaticInputCctUp		1.3.6.1.4.1.193.218.2.39.6.1.1.9
This object indicates the status of this UDP L2 VPN circuit. A value of true indicates that the VPN circuit is connected with it's remote site. A value of false indicates that the remote site is not presently connected.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

eriRouterUdpL2VpnStaticIfIndexOrZero		1.3.6.1.4.1.193.218.2.39.6.1.1.10
This object indicates whether there is a corresponding entry of this UDP L2 VPN access circuit in the ifTable. A non-zero value indicates the ifIndex of the entry in the ifTable. A value of zero indicates that there is no entry (for example, a pre-provisioned access circuit is used).
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceIndexOrZero

eriRouterUdpL2VpnStaticPwFlags		1.3.6.1.4.1.193.218.2.39.6.1.1.11
This object indicates more detailed information on the status of this UDP L2 VPN circuit. This object is a bit field so it may contain one or more of these values.
Status: current	Access: read-only
OBJECT-TYPE
	EriRouterVpnPwFlagsType

eriRouterUdpL2vpnStaticDscpCode		1.3.6.1.4.1.193.218.2.39.6.1.1.12
Diffserver code for the CES over UDP PW. Default is Zero. The dscp code values are listed as follows: 0..63 Differentiated services codepoint value af11 Assured Forwarding - Class 1/Drop precedence 1 af12 Assured Forwarding - Class 1/Drop precedence 2 af13 Assured Forwarding - Class 1/Drop precedence 3 af21 Assured Forwarding - Class 2/Drop precedence 1 af22 Assured Forwarding - Class 2/Drop precedence 2 af23 Assured Forwarding - Class 2/Drop precedence 3 af31 Assured Forwarding - Class 3/Drop precedence 1 af32 Assured Forwarding - Class 3/Drop precedence 2 af33 Assured Forwarding - Class 3/Drop precedence 3 af41 Assured Forwarding - Class 4/Drop precedence 1 af42 Assured Forwarding - Class 4/Drop precedence 2 af43 Assured Forwarding - Class 4/Drop precedence 3
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eriRouterUdpL2VpnStaticPwState		1.3.6.1.4.1.193.218.2.39.6.1.1.13
This object indicates the status of this UDP L2 VPN circuit. A value of up(1) indicates that the VPN circuit is active i.e. connected with its remote site. A value of down(2) indicates that the remote site is not presently connected. A value of standby(3) indicates the the PW is in pending state to become active (i.e. up)
Status: current	Access: read-only
OBJECT-TYPE
	EriRouterVpnPwStateType

eriRouterUdpL2VpnStaticPsnType		1.3.6.1.4.1.193.218.2.39.6.1.1.14
This object indicates the packet switched networks(PSN) type for this UDP L2 VPN circuit.
Status: current	Access: read-only
OBJECT-TYPE
	EriRouterVpnPsnType

eriRouterMplsL2VpnLdpPwStateChange		1.3.6.1.4.1.193.218.2.39.0.1
This notification is generated when PW state transitions operationally to UP/DOWN/STANDBY.
Status: current	Access: read-only
NOTIFICATION-TYPE

eriRouterL2VpnMIBGroups		1.3.6.1.4.1.193.218.2.39.2.1
OBJECT IDENTIFIER

eriRouterL2VpnMIBCompliances		1.3.6.1.4.1.193.218.2.39.2.2
OBJECT IDENTIFIER

eriRouterMplsL2VpnMIBGroups		1.3.6.1.4.1.193.218.2.39.2.3
OBJECT IDENTIFIER

eriRouterMplsL2VpnMIBCompliances		1.3.6.1.4.1.193.218.2.39.2.4
OBJECT IDENTIFIER

eriRouterMplsL2VpnPwMIBCompliance		1.3.6.1.4.1.193.218.2.39.2.2.2
The compliance statement for the L2VPN MIB.
Status: current	Access: read-only
MODULE-COMPLIANCE

eriRouterMplsL2VpnPwScalarGroup		1.3.6.1.4.1.193.218.2.39.2.1.3
Collection of scalar objects required for L2VPN PW management
Status: current	Access: read-only
OBJECT-GROUP

eriRouterMplsL2VpnStaticPwGroup		1.3.6.1.4.1.193.218.2.39.2.1.4
A collection of objects providing information about the status of static L2 VPN Pesudowires.
Status: current	Access: read-only
OBJECT-GROUP

eriRouterMplsL2VpnLdpPwGroup		1.3.6.1.4.1.193.218.2.39.2.1.5
A collection of objects providing information about the status of L2 VPN Pesudowires using Label Detection Protocol.
Status: current	Access: read-only
OBJECT-GROUP

eriRouterMplsL2VpnPwNotificationGroup		1.3.6.1.4.1.193.218.2.39.2.1.6
Objects required for L2VPN PW notifications.
Status: current	Access: read-only
NOTIFICATION-GROUP

eriRouterUdpL2VpnPwMIBCompliance		1.3.6.1.4.1.193.218.2.39.2.2.3
The compliance statement for the L2VPN MIB.
Status: current	Access: read-only
MODULE-COMPLIANCE

eriRouterUdpL2VpnStaticPwGroup		1.3.6.1.4.1.193.218.2.39.2.1.7
A collection of objects providing information about the status of static L2 VPN Pesudowires.
Status: current	Access: read-only
OBJECT-GROUP

eriRouterL2VpnStaticTable		1.3.6.1.4.1.193.218.2.39.1.1
This table contains objects which identify static Layer 2 VPN circuits. With respect to creation and deletion of entries in this table, rows are created or deleted when the VPN circuit is configured.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EriRouterL2VpnStaticEntry

eriRouterL2VpnStaticEntry		1.3.6.1.4.1.193.218.2.39.1.1.1
A conceptual row in the eriRouterL2VpnStaticTable.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	EriRouterL2VpnStaticEntry

eriRouterL2VpnStaticPeerAddr		1.3.6.1.4.1.193.218.2.39.1.1.1.1
This object indicates the ip address of the VPN peer.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	IpAddress

eriRouterL2VpnStaticVpnLabel		1.3.6.1.4.1.193.218.2.39.1.1.1.2
This object indicates the unique value assigned to a particular static VPN circuit.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	Unsigned32	4096..65535

eriRouterL2VpnStaticCctHandle		1.3.6.1.4.1.193.218.2.39.1.1.1.3
This object indicates the internal representation of the physical circuit to which this VPN is connected. A hexadecimal value of ff ff ff ff ff ff ff ff indicates an invalid circuit.
Status: obsolete	Access: read-only
OBJECT-TYPE
	EriRouterCircuitHandle

eriRouterL2VpnStaticVpnCctHandle		1.3.6.1.4.1.193.218.2.39.1.1.1.4
This object indicates the internal representation of VPN pseudo circuit.
Status: obsolete	Access: read-only
OBJECT-TYPE
	EriRouterCircuitHandle

eriRouterL2VpnStaticExpBits		1.3.6.1.4.1.193.218.2.39.1.1.1.5
This object indicates the number of exp bits configured for this VPN circuit.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Unsigned32

eriRouterL2VpnStaticInputCctUp		1.3.6.1.4.1.193.218.2.39.1.1.1.6
This object indicates the status of the VPN input circuit. A value of true indicates that the VPN circuit is connected with it's remote site. A value of false indicates that the remote site is not presently connected.
Status: obsolete	Access: read-only
OBJECT-TYPE
	TruthValue

eriRouterL2VpnStaticXcFlags		1.3.6.1.4.1.193.218.2.39.1.1.1.7
This object indicates more detailed information on the status of the VPN circuit. This object is a bit field so it may contain one or more of these values.
Status: obsolete	Access: read-only
OBJECT-TYPE
	EriRouterVpnXcFlagsType

eriRouterL2VpnStaticIfIndexOrZero		1.3.6.1.4.1.193.218.2.39.1.1.1.8
This object indicates whether there is a corresponding entry in the ifTable. A non-zero value indicates the ifIndex of the entry in the ifTable. A value of zero indicates that there is no entry.
Status: obsolete	Access: read-only
OBJECT-TYPE
	InterfaceIndexOrZero

eriRouterL2VpnLdpTable		1.3.6.1.4.1.193.218.2.39.1.2
This table contains objects which identify Layer Distribution Protocol Layer 2 VPN circuits. With respect to creation and deletion of entries in this table, rows are created or deleted when the VPN circuit is configured.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EriRouterL2VpnLdpEntry

eriRouterL2VpnLdpEntry		1.3.6.1.4.1.193.218.2.39.1.2.1
A conceptual row in the eriRouterL2VpnStaticTable.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	EriRouterL2VpnLdpEntry

eriRouterL2VpnLdpPeerAddr		1.3.6.1.4.1.193.218.2.39.1.2.1.1
This object indicates the ip address if the VPN peer.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	IpAddress

eriRouterL2VpnLdpVcId		1.3.6.1.4.1.193.218.2.39.1.2.1.2
This object indicates the unique virtual VPN circuit id assigned to this circuit.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	Integer32	0..2147483647

eriRouterL2VpnLdpCctHandle		1.3.6.1.4.1.193.218.2.39.1.2.1.3
This object indicates the internal representation of the physical circuit to which this VPN is connected. A hexadecimal value of ff ff ff ff ff ff ff ff indicates an invalid circuit.
Status: obsolete	Access: read-only
OBJECT-TYPE
	EriRouterCircuitHandle

eriRouterL2VpnLdpVpnCctHandle		1.3.6.1.4.1.193.218.2.39.1.2.1.4
This object indicates the internal representation of the VPN pseudo circuit.
Status: obsolete	Access: read-only
OBJECT-TYPE
	EriRouterCircuitHandle

eriRouterL2VpnLdpInLabel		1.3.6.1.4.1.193.218.2.39.1.2.1.5
This object indicates the value used by the remote connection in order to identify this VPN circuit when communicating with the local manager.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Unsigned32

eriRouterL2VpnLdpVpnLabel		1.3.6.1.4.1.193.218.2.39.1.2.1.6
This object indicates the value setup in the local configuration to identify this VPN circuit.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Unsigned32

eriRouterL2VpnLdpRemGrpId		1.3.6.1.4.1.193.218.2.39.1.2.1.7
This object indicates the remote group of which this VPN circuit is a part.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Unsigned32

eriRouterL2VpnLdpLocEncap		1.3.6.1.4.1.193.218.2.39.1.2.1.8
This object indicates the local encaps type associated with this VPN circuit.
Status: obsolete	Access: read-only
OBJECT-TYPE
	SnmpAdminString	Size(0..80)

eriRouterL2VpnLdpRemEncap		1.3.6.1.4.1.193.218.2.39.1.2.1.9
This object indicates the remote encaps type associated with this VPN circuit.
Status: obsolete	Access: read-only
OBJECT-TYPE
	SnmpAdminString	Size(0..80)

eriRouterL2VpnLdpLocVcType		1.3.6.1.4.1.193.218.2.39.1.2.1.10
This object indicates the type of virtual circuit on the local system.
Status: obsolete	Access: read-only
OBJECT-TYPE
	EriRouterVpnVcType

eriRouterL2VpnLdpRemVcType		1.3.6.1.4.1.193.218.2.39.1.2.1.11
This object indicates the type of virtual circuit on the remote system.
Status: obsolete	Access: read-only
OBJECT-TYPE
	EriRouterVpnVcType

eriRouterL2VpnLdpLocMtu		1.3.6.1.4.1.193.218.2.39.1.2.1.12
This object indicates the maximum transmission unit of the local VPN circuit.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Unsigned32

eriRouterL2VpnLdpRemMtu		1.3.6.1.4.1.193.218.2.39.1.2.1.13
This object indicates the maximum transmission unit of the remote connection.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Unsigned32

eriRouterL2VpnLdpXcCctUp		1.3.6.1.4.1.193.218.2.39.1.2.1.14
This object indicates the status of the VPN cross connect circuit. A value of true indicates that the VPN circuit is connected with it's remote site. A value of false indicates that the remote site is not presently connected.
Status: obsolete	Access: read-only
OBJECT-TYPE
	TruthValue

eriRouterL2VpnLdpExpBits		1.3.6.1.4.1.193.218.2.39.1.2.1.15
This object indicates the number of exp bits configured for this VPN circuit.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Unsigned32

eriRouterL2VpnLdpInputCctUp		1.3.6.1.4.1.193.218.2.39.1.2.1.16
This object indicates the status of the VPN input circuit. A value of true indicates that the VPN circuit is connected with it's remote site. A value of false indicates that the remote site is not presently connected.
Status: obsolete	Access: read-only
OBJECT-TYPE
	TruthValue

eriRouterL2VpnLdpXcFlags		1.3.6.1.4.1.193.218.2.39.1.2.1.17
This object indicates more detailed information on the status of the VPN circuit. This object is a bit field so it may contain one or more of these values.
Status: obsolete	Access: read-only
OBJECT-TYPE
	EriRouterVpnXcFlagsType

eriRouterL2VpnLdpIfIndexOrZero		1.3.6.1.4.1.193.218.2.39.1.2.1.18
This object indicates whether there is a corresponding entry in the ifTable. A non-zero value indicates the ifIndex of the entry in the ifTable. A value of zero indicates that there is no entry.
Status: obsolete	Access: read-only
OBJECT-TYPE
	InterfaceIndexOrZero

eriRouterL2VpnMIBCompliance		1.3.6.1.4.1.193.218.2.39.2.2.1
The compliance statement for the L2VPN MIB.
Status: obsolete	Access: read-only
MODULE-COMPLIANCE

eriRouterMplsL2VpnMIBCompliance		1.3.6.1.4.1.193.218.2.39.2.4.1
The compliance statement for the L2VPN MIB.
Status: current	Access: read-only
MODULE-COMPLIANCE

eriRouterL2VpnStaticGroup		1.3.6.1.4.1.193.218.2.39.2.1.1
A collection of objects providing information about the status of static L2 VPN connections.
Status: obsolete	Access: read-only
OBJECT-GROUP

eriRouterMplsL2VpnStaticGroup		1.3.6.1.4.1.193.218.2.39.2.3.1
A collection of objects providing information about the status of static L2 VPN connections.
Status: current	Access: read-only
OBJECT-GROUP

eriRouterL2VpnLdpGroup		1.3.6.1.4.1.193.218.2.39.2.1.2
A collection of objects providing information about the status of L2 VPN connections using Label Detection Protocol.
Status: obsolete	Access: read-only
OBJECT-GROUP

eriRouterMplsL2VpnLdpGroup		1.3.6.1.4.1.193.218.2.39.2.3.2
A collection of objects providing information about the status of L2 VPN connections using Label Detection Protocol.
Status: current	Access: read-only
OBJECT-GROUP