EQLNAS-MIB

File: EQLNAS-MIB.mib (234479 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC INET-ADDRESS-MIB
EQUALLOGIC-SMI EQLAPPLIANCE-MIB EQLVOLUME-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Unsigned32
Counter64 Integer32 TimeTicks
enterprises IpAddress Counter32
Gauge32 DateAndTime RowPointer
TruthValue RowStatus DisplayString
InetAddressType InetAddress equalLogic
eqlApplianceIndex eqlApplianceNetworkType eqlApplianceNetworkID
StatusDisabledDefault SiteIndex SiteIndexOrZero
eqliscsiVolumeReplSiteIndex

Defined Types

UNIXPermissions  
TEXTUAL-CONVENTION    
  current Unsigned32

ClusterNameType  
TEXTUAL-CONVENTION    
  current STRING Size(1..64)

ClusterIdType  
TEXTUAL-CONVENTION    
  current STRING Size(0..50)

CertificateType  
TEXTUAL-CONVENTION    
  current STRING Size(0..1750)

NASContainerNameType  
TEXTUAL-CONVENTION    
  current STRING Size(1..230)

EqlNASApplianceEntry  
SEQUENCE    
  eqlNASApplianceRowStatus RowStatus
  eqlNASAppliancePoolSize Unsigned32
  eqlNASApplianceEQLPoolIndex Unsigned32
  eqlNASApplianceReplRemoteUserName STRING
  eqlNASApplianceNFSv4Mode INTEGER

EqlNASContainerEntry  
SEQUENCE    
  eqlNASContainerIndex Unsigned32
  eqlNASContainerRowStatus RowStatus
  eqlNASContainerName STRING
  eqlNASContainerCapacity Unsigned32
  eqlNASContainerUsedSpaceAlert Unsigned32
  eqlNASContainerSnapshotHardQuota Unsigned32
  eqlNASContainerSnapshotUsedSpaceAlert Unsigned32
  eqlNASContainerUnixFilePermissions UNIXPermissions
  eqlNASContainerUnixDirPermissions UNIXPermissions
  eqlNASContainerQuotaEnabled TruthValue
  eqlNASContainerFileAccessSecurity INTEGER
  eqlNASContainerAccessTimeManagementGranularity INTEGER
  eqlNASContainerOptimizationEnabled TruthValue
  eqlNASContainerDedupMethodType INTEGER
  eqlNASContainerCompressionEnabled TruthValue
  eqlNASContainerModificationTimeFilter INTEGER
  eqlNASContainerAccessTimeFilter INTEGER
  eqlNASContainerExcludeFilesByNamePattern STRING
  eqlNASContainerAction INTEGER
  eqlNASContainerDefaultUserQuota Unsigned32
  eqlNASContainerDefaultUserQuotaAlert Unsigned32
  eqlNASContainerDefaultGroupQuota Unsigned32
  eqlNASContainerDefaultGroupQuotaAlert Unsigned32
  eqlNASContainerOptimizationFilterMode INTEGER
  eqlNASContainerRehydrateOnReadEnabled TruthValue

EqlNASContainerUniqueIDEntry  
SEQUENCE    
  eqlNASContainerUniqueIDType INTEGER
  eqlNASContainerUniqueIDValueLen Unsigned32
  eqlNASContainerUniqueIDValue STRING

EqlNASApplianceDefaultCfgEntry  
SEQUENCE    
  eqlNASApplianceConfigUsedSpaceAlert Unsigned32
  eqlNASApplianceConfigSnapSpaceAlert Unsigned32
  eqlNASApplianceConfigSnapHardQuota Unsigned32
  eqlNASApplianceContainerUnixFilePerms UNIXPermissions
  eqlNASApplianceContainerUnixDirPerms UNIXPermissions
  eqlNASApplianceContainerFileSecurity INTEGER
  eqlNASApplianceDefaultUserQuota Unsigned32
  eqlNASApplianceDefaultUserQuotaAlert Unsigned32
  eqlNASApplianceDefaultGroupQuota Unsigned32
  eqlNASApplianceDefaultGroupQuotaAlert Unsigned32
  eqlNASApplianceDefaultCIFSAllowGuestAccess TruthValue
  eqlNASApplianceCIFSAuthenticationMode INTEGER
  eqlNASApplianceDefaultCIFSLockEnforcement INTEGER
  eqlNASApplianceNFSExportReadWrite INTEGER
  eqlNASApplianceNFSExportTrustedUsers INTEGER
  eqlNASApplianceAccessTimeManagementGranularity INTEGER
  eqlNASApplianceOptimizationEnabled TruthValue
  eqlNASApplianceDedupMethodType INTEGER
  eqlNASApplianceCompressionEnabled TruthValue
  eqlNASApplianceModificationTimeFilter INTEGER
  eqlNASApplianceAccessTimeFilter INTEGER
  eqlNASApplianceExcludeFilesByNamePattern STRING
  eqlNASApplianceDefaultCIFSAntivirusEnabled StatusDisabledDefault
  eqlNASApplianceDefaultCIFSAntivirusPolicy INTEGER
  eqlNASApplianceDefaultCIFSAntivirusExtensions STRING
  eqlNASApplianceDefaultCIFSAntivirusExtensionsPolicy INTEGER
  eqlNASApplianceDefaultCIFSAntivirusExcludeDirPaths STRING
  eqlNASApplianceDefaultCIFSAntivirusLargeFileSize Unsigned32
  eqlNASApplianceDefaultCIFSAntivirusLargeFileOpen INTEGER
  eqlNASApplianceDefaultNFSExportsFileId32bit INTEGER

EqlNASContainerStatusEntry  
SEQUENCE    
  eqlNASContainerStatusConnections Unsigned32
  eqlNASContainerStatusUsedSpace Unsigned32
  eqlNASContainerStatusSnapshotSpace Unsigned32
  eqlNASContainerStatusNumNFSExports Unsigned32
  eqlNASContainerStatusNumCIFSShares Unsigned32
  eqlNASContainerStatusAllocatedSpace Unsigned32
  eqlNASContainerStatusFreeSpace Unsigned32
  eqlNASContainerStatusNumOfSnapshots Unsigned32
  eqlNASContainerStatusOptimizationSpaceSavings Unsigned32
  eqlNASContainerStatusOptimized TruthValue
  eqlNASContainerStatusReplState INTEGER
  eqlNASContainerStatusNextSnapshotID Unsigned32

EqlNASApplianceNFSExportsEntry  
SEQUENCE    
  eqlNASApplianceNFSExportName STRING
  eqlNASApplianceNFSExportsRowStatus RowStatus
  eqlNASApplianceNFSExportDirectory STRING
  eqlNASApplianceNFSAccess INTEGER
  eqlNASApplianceNFSLimitReportedSize Unsigned32
  eqlNASApplianceNFSAccessClientIPType InetAddressType
  eqlNASApplianceNFSAccessClientIP InetAddress
  eqlNASApplianceNFSAccessClientNetmaskType InetAddressType
  eqlNASApplianceNFSAccessClientNetmask InetAddress
  eqlNASApplianceNFSTrustUsers INTEGER
  eqlNASApplianceNFSExportsFileId32bit INTEGER

EqlNASApplianceCIFSEntry  
SEQUENCE    
  eqlNASApplianceCIFSShareName STRING
  eqlNASApplianceCIFSRowStatus RowStatus
  eqlNASApplianceCIFSExportedDirectory STRING
  eqlNASApplianceCIFSAllowGuestAccess TruthValue
  eqlNASApplianceCIFSLockEnforcement INTEGER
  eqlNASApplianceCIFSAntivirusEnabled StatusDisabledDefault
  eqlNASApplianceCIFSAntivirusPolicy INTEGER
  eqlNASApplianceCIFSAntivirusExtensions STRING
  eqlNASApplianceCIFSAntivirusExtensionsPolicy INTEGER
  eqlNASApplianceCIFSAntivirusExcludeDirPaths STRING
  eqlNASApplianceCIFSAntivirusLargeFileSize Unsigned32
  eqlNASApplianceCIFSAntivirusLargeFileOpen INTEGER

EqlNASContainerDirectoryOpsEntry  
SEQUENCE    
  eqlNASContainerDirectoryOpsIndex Unsigned32
  eqlNASContainerDirectoryRowStatus RowStatus
  eqlNASContainerDirectoryName STRING
  eqlNASContainerDirectoryCaseInsensitive INTEGER

EqlNASSnapshotEntry  
SEQUENCE    
  eqlNASSnapshotIndex Unsigned32
  eqlNASSnapshotRowStatus RowStatus
  eqlNASSnapshotName STRING
  eqlNASSnapshotSize Integer32
  eqlNASSnapshotTimestamp Counter32
  eqlNASSnapshotRollBack TruthValue
  eqlNASSnapshotPolicyIdx Integer32

EqlNASSnapshotPolicyEntry  
SEQUENCE    
  eqlNASSnapshotPolicyIndex Integer32
  eqlNASSnapshotPolicyRowStatus RowStatus
  eqlNASSnapshotPolicyName STRING
  eqlNASSnapshotPolicyMaxKeep Integer32
  eqlNASSnapshotPolicyType INTEGER
  eqlNASSnapshotPolicyRepeatFactor Integer32
  eqlNASSnapshotPolicyStartTime Integer32
  eqlNASSnapshotPolicyEndTime Integer32
  eqlNASSnapshotPolicyTimeFrequency Integer32
  eqlNASSnapshotPolicyStartDate Integer32
  eqlNASSnapshotPolicyEndDate Integer32
  eqlNASSnapshotPolicyWeekMask Integer32
  eqlNASSnapshotPolicyMonthMask Integer32
  eqlNASSnapshotPolicyOccurence Integer32
  eqlNASSnapshotPolicyReplication SiteIndexOrZero
  eqlNASSnapshotPolicyAdminStatus INTEGER
  eqlNASSnapshotPolicyCategory INTEGER

EqlNASSnapshotPolicyStatusEntry  
SEQUENCE    
  eqlNASSnapshotPolicyStatusNextCreate Counter32
  eqlNASSnapshotPolicyStatusOperStatus INTEGER

EqlNASQuotaEntry  
SEQUENCE    
  eqlNASQuotaRowStatus RowStatus
  eqlNASQuotaTargetType INTEGER
  eqlNASQuotaTargetName STRING
  eqlNASQuotaWarnLimit Integer32
  eqlNASQuotaHardLimit Unsigned32
  eqlNASQuotaUsage Integer32

EqlNASReplSiteEntry  
SEQUENCE    
  eqlNASReplSitePartnershipId Unsigned32
  eqlNASReplSiteRowStatus RowStatus
  eqlNASReplSiteVolumeReplSiteIndex SiteIndex
  eqlNASReplSiteLocalClusterInetAddrType InetAddressType
  eqlNASReplSiteLocalClusterInetAddr InetAddress
  eqlNASReplSiteRemoteClusterInetAddrType InetAddressType
  eqlNASReplSiteRemoteClusterInetAddr InetAddress
  eqlNASReplSitePartnershipState INTEGER
  eqlNASReplSiteUserName STRING
  eqlNASReplSitePassword STRING
  eqlNASReplSiteRemoteClusterName STRING
  eqlNASReplSiteAction INTEGER
  eqlNASReplSiteRemoteUserName STRING
  eqlNASReplSiteRemotePassword STRING
  eqlNASReplSiteRemoteClusterId ClusterIdType
  eqlNASReplSiteRemoteClusterMPV Unsigned32
  eqlNASReplSiteRemoteNetworkAddrType InetAddressType
  eqlNASReplSiteRemoteNetworkAddr InetAddress
  eqlNASReplSiteRemoteNetworkMask InetAddress

EqlNASReplicationStatus  
INTEGER unknown(0), idle(1), active(2), waitingretry(3), failed(4), paused(5), cancelled(6), resuming(7), deleting(8), pausing(9), finished(10), cancelling(11), promoted(12), promoting(13), idlewaittoschedule(14), demoting(15)    

EqlNASReplicationEntry  
SEQUENCE    
  eqlNASReplicationId Unsigned32
  eqlNASReplicationRowStatus RowStatus
  eqlNASReplicationLastRecoveryTime Counter32
  eqlNASReplicationNextRecoveryTime Counter32
  eqlNASReplicationSourceClusterName STRING
  eqlNASReplicationSourceFSId Unsigned32
  eqlNASReplicationSourceFSName STRING
  eqlNASReplicationDestClusterName STRING
  eqlNASReplicationDestFSId Unsigned32
  eqlNASReplicationDestFSName STRING
  eqlNASReplicationStatus EqlNASReplicationStatus
  eqlNASReplicationMinToComplete Unsigned32
  eqlNASReplicationTransferredPer Unsigned32
  eqlNASReplicationAction INTEGER

EqlNASReplPartnerInfoMapEntry  
SEQUENCE    
  eqlNASReplPartnerInfoMapRowStatus RowStatus
  eqlNASReplPartnerInfoMapClusterName STRING
  eqlNASReplPartnerInfoMapClusterSanVIPType InetAddressType
  eqlNASReplPartnerInfoMapClusterSanVIP InetAddress
  eqlNASReplPartnerInfoMapClusterId ClusterIdType
  eqlNASReplPartnerInfoMapClusterMPV Unsigned32
  eqlNASReplPartnerInfoMapNetworkAddrType InetAddressType
  eqlNASReplPartnerInfoMapNetworkAddr InetAddress
  eqlNASReplPartnerInfoMapNetworkMask InetAddress

EqlNASReplPartnerIdMapEntry  
SEQUENCE    
  eqlNASReplPartnerIdMapRowStatus RowStatus
  eqlNASReplPartnerIdMapPartnershipId Unsigned32

EqlNASContainerCfgEntry  
SEQUENCE    
  eqlNASContainerCfgIndex Unsigned32
  eqlNASContainerCfgRowStatus RowStatus
  eqlNASContainerCfgSourceClusterName STRING
  eqlNASContainerCfgSourceFSName STRING
  eqlNASContainerCfgModules BITS
  eqlNASContainerCfgRequestId Counter64

EqlNASFSScanEntry  
SEQUENCE    
  eqlNASFSScanRate INTEGER

EqlNASReplicationHistoryEntry  
SEQUENCE    
  eqlNASReplicationHistorySampleIndex Unsigned32
  eqlNASReplicationHistoryStartTime Integer32
  eqlNASReplicationHistoryEndTime Integer32
  eqlNASReplicationHistoryTransferredMb Unsigned32
  eqlNASReplicationHistoryStatus EqlNASReplicationStatus
  eqlNASReplicationHistorySrcContainer STRING
  eqlNASReplicationHistoryDestContainer STRING

EqlNASApplianceAntivirusHostEntry  
SEQUENCE    
  eqlNASApplianceAntivirusHostIndex Unsigned32
  eqlNASApplianceAntivirusHostRowStatus RowStatus
  eqlNASApplianceAntivirusHostName STRING
  eqlNASApplianceAntivirusHostPortNumber Unsigned32
  eqlNASApplianceAntivirusHostTransactionState INTEGER

EqlNASChassisEntry  
SEQUENCE    
  eqlNASChassisIndex Unsigned32
  eqlNASChassisRowStatus RowStatus
  eqlNASChassisName STRING
  eqlNASChassisRequestId Counter64
  eqlNASChassisFileSystemMember TruthValue
  eqlNASChassisModelName STRING

EqlNASChassisComponentStatus  
INTEGER optimal(0), not-optimal(1), critical(2), not-available(3)    

EqlNASChassisACPowerStatus  
INTEGER redundant(0), partial(1), not-available(2)    

EqlNASChassisControllerState  
INTEGER standby(0), unformatted(1), formatted(2), detached(3), down(4), not-available(5)    

EqlNASChassisSanType  
INTEGER iscsi(0), eql(1), fc(2), not-available(3)    

EqlNASChassisNetworkSpeed  
INTEGER one-gb-ethernet(0), ten-gb-ethernet(1), twenty-gb-ethernet(2), one-gb-fibre-channel(3), two-gb-fibre-channel(4), four-gb-fibre-channel(5), eight-gb-fibre-channel(6), not-available(7)    

EqlNASChassisControllerLocation  
INTEGER one(0), two(1), irrelevant(2), not-available(3)    

EqlNASChassisStatusEntry  
SEQUENCE    
  eqlNASChassisOverallStatus EqlNASChassisComponentStatus
  eqlNASChassisChassisTag STRING
  eqlNASChassisModel STRING
  eqlNASChassisSanType EqlNASChassisSanType
  eqlNASChassisOverallControllerStatus EqlNASChassisComponentStatus
  eqlNASChassisClientNetworkSpeed EqlNASChassisNetworkSpeed
  eqlNASChassisBackplaneNetworkSpeed EqlNASChassisNetworkSpeed
  eqlNASChassisInternalNetworkSpeed EqlNASChassisNetworkSpeed
  eqlNASChassisSanNetworkSpeed EqlNASChassisNetworkSpeed
  eqlNASChassisClientNetworkStatus EqlNASChassisComponentStatus
  eqlNASChassisBackplaneNetworkStatus EqlNASChassisComponentStatus
  eqlNASChassisInternalNetworkStatus EqlNASChassisComponentStatus
  eqlNASChassisSanNetworkStatus EqlNASChassisComponentStatus
  eqlNASChassisOverallFanStatus EqlNASChassisComponentStatus
  eqlNASChassisOverallPowerSupplyStatus EqlNASChassisACPowerStatus

EqlNASChassisFanStatusEntry  
SEQUENCE    
  eqlNASChassisFanName STRING
  eqlNASChassisFanStatus EqlNASChassisComponentStatus
  eqlNASChassisFanRpm Unsigned32
  eqlNASChassisFanRpmRange STRING

EqlNASChassisPowerSupplyStatusEntry  
SEQUENCE    
  eqlNASChassisPowerSupplyName STRING
  eqlNASChassisPowerSupplyStatus EqlNASChassisComponentStatus

EqlNASChassisControllerStatusEntry  
SEQUENCE    
  eqlNASChassisControllerIndex Unsigned32
  eqlNASChassisControllerStatus EqlNASChassisComponentStatus
  eqlNASChassisControllerState EqlNASChassisControllerState
  eqlNASChassisControllerLocation EqlNASChassisControllerLocation
  eqlNASChassisControllerAmbientTemperatureStatus EqlNASChassisComponentStatus
  eqlNASChassisControllerAmbientTemperatureValue Integer32
  eqlNASChassisControllerSystemControllerId STRING
  eqlNASChassisControllerBPSStatus EqlNASChassisComponentStatus
  eqlNASChassisControllerBPSIsAccessible TruthValue
  eqlNASChassisControllerBPSModel STRING
  eqlNASChassisControllerBPSCharge Unsigned32
  eqlNASChassisControllerCPUOverallStatus EqlNASChassisComponentStatus
  eqlNASChassisControllerCPUCurrentCoresCount Unsigned32
  eqlNASChassisControllerOverallFanStatus EqlNASChassisComponentStatus
  eqlNASChassisControllerOverallLocalDiskStatus EqlNASChassisComponentStatus
  eqlNASChassisControllerOverallRaidControllerStatus EqlNASChassisComponentStatus
  eqlNASChassisControllerOverallVirtualDiskStatus EqlNASChassisComponentStatus
  eqlNASChassisControllerMemoryStatus EqlNASChassisComponentStatus
  eqlNASChassisControllerMemorySize Unsigned32
  eqlNASChassisControllerBackplaneNetworkStatus EqlNASChassisComponentStatus
  eqlNASChassisControllerBackplaneNetworkSpeed EqlNASChassisNetworkSpeed
  eqlNASChassisControllerClientNetworkStatus EqlNASChassisComponentStatus
  eqlNASChassisControllerClientNetworkSpeed EqlNASChassisNetworkSpeed
  eqlNASChassisControllerInternalNetworkStatus EqlNASChassisComponentStatus
  eqlNASChassisControllerInternalNetworkSpeed EqlNASChassisNetworkSpeed
  eqlNASChassisControllerSanNetworkStatus EqlNASChassisComponentStatus
  eqlNASChassisControllerSanNetworkSpeed EqlNASChassisNetworkSpeed
  eqlNASChassisControllerOverallPowerSupplyStatus EqlNASChassisACPowerStatus

EqlNASChassisControllerFanStatusEntry  
SEQUENCE    
  eqlNASChassisControllerFanName STRING
  eqlNASChassisControllerFanStatus EqlNASChassisComponentStatus
  eqlNASChassisControllerFanRpm Unsigned32
  eqlNASChassisControllerFanRpmRange STRING

EqlNASChassisControllerPowerSupplyStatusEntry  
SEQUENCE    
  eqlNASChassisControllerPowerSupplyName STRING
  eqlNASChassisControllerPowerSupplyStatus EqlNASChassisComponentStatus

EqlNASChassisControllerDiskStatusEntry  
SEQUENCE    
  eqlNASChassisControllerDiskName STRING
  eqlNASChassisControllerDiskStatus EqlNASChassisComponentStatus

EqlNASChassisControllerNicStatusEntry  
SEQUENCE    
  eqlNASChassisControllerNicName STRING
  eqlNASChassisControllerNicState INTEGER
  eqlNASChassisControllerNicSpeed EqlNASChassisNetworkSpeed
  eqlNASChassisControllerNicSlot STRING
  eqlNASChassisControllerNicPort Unsigned32
  eqlNASChassisControllerNicDuplex INTEGER
  eqlNASChassisControllerNicFlowControl INTEGER

EqlNASDiagsEntry  
SEQUENCE    
  eqlNASDiagsStart INTEGER
  eqlNASDiagsCaseNumber STRING
  eqlNASDiagsStatus INTEGER

EqlNASClientStaticRouteEntry  
SEQUENCE    
  eqlNASClientStaticRouteRowStatus RowStatus
  eqlNASClientStaticRouteNetworkAddrType InetAddressType
  eqlNASClientStaticRouteNetworkAddr InetAddress
  eqlNASClientStaticRouteNetworkMaskType InetAddressType
  eqlNASClientStaticRouteNetworkMask InetAddress
  eqlNASClientStaticRouteGatewayAddrType InetAddressType
  eqlNASClientStaticRouteGatewayAddr InetAddress

EqlNASClusterUpdateEntry  
SEQUENCE    
  eqlNASClusterUpdateRowStatus RowStatus
  eqlNASClusterUpdateFilename STRING
  eqlNASClusterUpdateEQLGroupMPV Unsigned32
  eqlNASClusterUpdateClusterMPV Unsigned32
  eqlNASClusterUpdateEQLGroupCurrentCompLevel Unsigned32
  eqlNASClusterUpdateRequestId Counter64

EqlNASClusterInfoEntry  
SEQUENCE    
  eqlNASClusterInfoRowStatus RowStatus
  eqlNASClusterInfoSiteType INTEGER
  eqlNASClusterInfoSegmentId Unsigned32
  eqlNASClusterInfoSegmentSize Unsigned32
  eqlNASClusterInfoMoreSegment TruthValue
  eqlNASClusterInfoCertificate CertificateType
  eqlNASClusterInfoClusterId ClusterIdType

EqlNASReplPartnerClusterIdMapEntry  
SEQUENCE    
  eqlNASReplPartnerClusterIdMapSanVIPType InetAddressType
  eqlNASReplPartnerClusterIdMapSanVIP InetAddress
  eqlNASReplPartnerClusterIdMapClusterId ClusterIdType

EqlNASReplPartnerConfigEntry  
SEQUENCE    
  eqlNASReplPartnerConfigRowStatus RowStatus
  eqlNASReplPartnerConfigCertificate CertificateType
  eqlNASReplPartnerConfigInetAddrType InetAddressType
  eqlNASReplPartnerConfigInetAddr InetAddress

EqlNASReplicationError  
INTEGER none(0), disconnected(1), internal(2), fs-down(3), config(4), not-sec(5), sec-busy(6), sec-fs-down(7), versions-dont-match(8), no-space(9), sec-cur-not-empty(10), no-base-found(11), pri-vol-reclaim(12), sec-vol-reclaim(13), fs-pri-not-optimal(14), fs-sec-not-optimal(15), fs-pri-not-available-threads(16), fs-sec-not-available-threads(17), jumbo-frame(18), dest-repl-disabled(19), snap-clone-base(20)    

EqlNASReplicationRole  
INTEGER unknown(0), source(1), destination(2)    

EqlNASReplEntry  
SEQUENCE    
  eqlNASReplRowStatus RowStatus
  eqlNASReplRemoteFSId Unsigned32
  eqlNASReplVolumeReplSiteIndex SiteIndex
  eqlNASReplRemoteClusterName STRING
  eqlNASReplRemoteFSName STRING
  eqlNASReplAchievedRecoveryTime Counter32
  eqlNASReplNextRecoveryTime Counter32
  eqlNASReplTargetRecoveryTime Counter32
  eqlNASReplTransferredPercent Unsigned32
  eqlNASReplTransferredMB Unsigned32
  eqlNASReplStatus EqlNASReplicationStatus
  eqlNASReplAction INTEGER
  eqlNASReplRole EqlNASReplicationRole
  eqlNASReplSecsToComplete Unsigned32
  eqlNASReplError EqlNASReplicationError
  eqlNASReplCurrentXferRateKbps Unsigned32

EqlNASQuotaUsageEntry  
SEQUENCE    
  eqlNASQuotaUsageRowStatus RowStatus
  eqlNASQuotaUsageTargetType INTEGER
  eqlNASQuotaUsageTargetName STRING
  eqlNASQuotaUsageMB Integer32

EqlNASGroupQuotaEffectiveRuleEntry  
SEQUENCE    
  eqlNASGroupQuotaEffectiveRuleTargetName STRING
  eqlNASGroupQuotaEffectiveRuleRowStatus RowStatus
  eqlNASGroupQuotaEffectiveRuleSoftLimit Integer32
  eqlNASGroupQuotaEffectiveRuleHardLimit Integer32
  eqlNASGroupQuotaEffectiveRuleSoftLimitEnabled TruthValue
  eqlNASGroupQuotaEffectiveRuleHardLimitEnabled TruthValue

EqlNASUserQuotaEffectiveRuleEntry  
SEQUENCE    
  eqlNASUserQuotaEffectiveRuleTargetName STRING
  eqlNASUserQuotaEffectiveRuleRowStatus RowStatus
  eqlNASUserQuotaEffectiveRuleUserSoftLimit Integer32
  eqlNASUserQuotaEffectiveRuleUserHardLimit Integer32
  eqlNASUserQuotaEffectiveRuleGroupName STRING
  eqlNASUserQuotaEffectiveRuleGroupSoftLimit Integer32
  eqlNASUserQuotaEffectiveRuleGroupHardLimit Integer32
  eqlNASUserQuotaEffectiveRuleUserSoftLimitEnabled TruthValue
  eqlNASUserQuotaEffectiveRuleUserHardLimitEnabled TruthValue
  eqlNASUserQuotaEffectiveRuleGroupSoftLimitEnabled TruthValue
  eqlNASUserQuotaEffectiveRuleGroupHardLimitEnabled TruthValue

EqlNASConfigStateEntry  
SEQUENCE    
  eqlNASConfigStateConfigFinished TruthValue
  eqlNASConfigStateHardwareReplaceInProgress TruthValue

EqlNASClientEntry  
SEQUENCE    
  eqlNASClientNodeIndex Unsigned32
  eqlNASClientIPAddressType InetAddressType
  eqlNASClientIPAddress InetAddress
  eqlNASClientUserName STRING
  eqlNASClientProtocol INTEGER
  eqlNASClientConnectedTime Counter32
  eqlNASClientIdleTime Counter32
  eqlNASClientNumOpenFiles Unsigned32
  eqlNASClientIsGuest TruthValue

EqlNASStatsClusterTrafficRateEntry  
SEQUENCE    
  eqlNASStatsClusterTrafficRateTimestamp Counter32
  eqlNASStatsClusterTrafficRateNfsReadMBsPerSec Unsigned32
  eqlNASStatsClusterTrafficRateNfsWriteMBsPerSec Unsigned32
  eqlNASStatsClusterTrafficRateNdmpReadMBsPerSec Unsigned32
  eqlNASStatsClusterTrafficRateNdmpWriteMBsPerSec Unsigned32
  eqlNASStatsClusterTrafficRateCifsReadMBsPerSec Unsigned32
  eqlNASStatsClusterTrafficRateCifsWriteMBsPerSec Unsigned32
  eqlNASStatsClusterTrafficRateReplicationReadMBsPerSec Unsigned32
  eqlNASStatsClusterTrafficRateReplicationWriteMBsPerSec Unsigned32
  eqlNASStatsClusterTrafficRateStorageSubSystemReadMBsPerSec Unsigned32
  eqlNASStatsClusterTrafficRateStorageSubSystemWriteMBsPerSec Unsigned32
  eqlNASStatsClusterTrafficRateNetworkOverheadReadMBsPerSec Unsigned32
  eqlNASStatsClusterTrafficRateNetworkOverheadWriteMBsPerSec Unsigned32
  eqlNASStatsClusterTrafficRateNetworkPacketDropsPerSec Unsigned32
  eqlNASStatsClusterTrafficRateNfsIOPSRead Unsigned32
  eqlNASStatsClusterTrafficRateNfsIOPSWrite Unsigned32
  eqlNASStatsClusterTrafficRateNfsIOPSOther Unsigned32
  eqlNASStatsClusterTrafficRateCifsIOPSRead Unsigned32
  eqlNASStatsClusterTrafficRateCifsIOPSWrite Unsigned32
  eqlNASStatsClusterTrafficRateCifsIOPSOther Unsigned32
  eqlNASStatsClusterTrafficRateTotalPrimaryMBsPerSec Unsigned32
  eqlNASStatsClusterTrafficRateTotalSecondaryMBsPerSec Unsigned32

EqlNASStatsControllerTrafficRateEntry  
SEQUENCE    
  eqlNASStatsControllerTrafficRateIndex Unsigned32
  eqlNASStatsControllerTrafficRateTimestamp Counter32
  eqlNASStatsControllerTrafficRateNfsReadMBsPerSec Unsigned32
  eqlNASStatsControllerTrafficRateNfsWriteMBsPerSec Unsigned32
  eqlNASStatsControllerTrafficRateNdmpReadMBsPerSec Unsigned32
  eqlNASStatsControllerTrafficRateNdmpWriteMBsPerSec Unsigned32
  eqlNASStatsControllerTrafficRateCifsReadMBsPerSec Unsigned32
  eqlNASStatsControllerTrafficRateCifsWriteMBsPerSec Unsigned32
  eqlNASStatsControllerTrafficRateReplicationReadMBsPerSec Unsigned32
  eqlNASStatsControllerTrafficRateReplicationWriteMBsPerSec Unsigned32
  eqlNASStatsControllerTrafficRateStorageSubSystemReadMBsPerSec Unsigned32
  eqlNASStatsControllerTrafficRateStorageSubSystemWriteMBsPerSec Unsigned32
  eqlNASStatsControllerTrafficRateNetworkOverheadReadMBsPerSec Unsigned32
  eqlNASStatsControllerTrafficRateNetworkOverheadWriteMBsPerSec Unsigned32
  eqlNASStatsControllerTrafficRateNetworkPacketDropsPerSec Unsigned32
  eqlNASStatsControllerTrafficRateNfsIOPSRead Unsigned32
  eqlNASStatsControllerTrafficRateNfsIOPSWrite Unsigned32
  eqlNASStatsControllerTrafficRateNfsIOPSOther Unsigned32
  eqlNASStatsControllerTrafficRateCifsIOPSRead Unsigned32
  eqlNASStatsControllerTrafficRateCifsIOPSWrite Unsigned32
  eqlNASStatsControllerTrafficRateCifsIOPSOther Unsigned32
  eqlNASStatsControllerTrafficRateTotalPrimaryMBsPerSec Unsigned32
  eqlNASStatsControllerTrafficRateTotalPrimaryMBsPerSecToAverage Unsigned32
  eqlNASStatsControllerTrafficRateTotalSecondaryMBsPerSec Unsigned32

EqlNASStatsControllerLoadBalancingEntry  
SEQUENCE    
  eqlNASStatsControllerLoadBalancingIndex Unsigned32
  eqlNASStatsControllerLoadBalancingTimestamp Counter32
  eqlNASStatsControllerCPULoadPercent Unsigned32
  eqlNASStatsControllerTotalCifsConnections Unsigned32

EqlNASCacheInfoEntry  
SEQUENCE    
  eqlNASCacheInfoIndex Unsigned32
  eqlNASCacheInfoCacheObjectName STRING
  eqlNASCacheInfoCacheObjectExpiryTime Unsigned32
  eqlNASCacheInfoCacheObjectState STRING
  eqlNASCacheInfoAction INTEGER

EqlNASReplHistoryEntry  
SEQUENCE    
  eqlNASReplHistoryUniqueId Unsigned32
  eqlNASReplHistoryEventTime Integer32
  eqlNASReplHistorySourceContainerName NASContainerNameType
  eqlNASReplHistorySourceClusterName ClusterNameType
  eqlNASReplHistoryDestContainerName NASContainerNameType
  eqlNASReplHistoryDestClusterName ClusterNameType
  eqlNASReplHistoryStartTime Integer32
  eqlNASReplHistoryEndTime Integer32
  eqlNASReplHistoryTransferredMb Counter32
  eqlNASReplHistoryStatus EqlNASReplicationStatus

EqlNASTaskEntry  
SEQUENCE    
  eqlNASTaskIndex Unsigned32
  eqlNASTaskRowStatus RowStatus
  eqlNASTaskType INTEGER
  eqlNASTaskContext STRING
  eqlNASTaskNumSubTasks Unsigned32
  eqlNASTaskSubTaskInProgress INTEGER
  eqlNASTaskSubtaskStatus Unsigned32
  eqlNASTaskStatus INTEGER
  eqlNASTaskUserAction INTEGER
  eqlNASTaskStartTime Counter32

EqlNASTaskContainerReplInfoEntry  
SEQUENCE    
  eqlNASTaskContainerReplInfoRowStatus RowStatus
  eqlNASTaskContainerReplInfoRemoteFSId Unsigned32
  eqlNASTaskContainerReplInfoVolumeReplSiteIndex SiteIndex
  eqlNASTaskContainerReplInfoRemoteClusterName STRING
  eqlNASTaskContainerReplInfoLocalFSName STRING
  eqlNASTaskContainerReplInfoRemoteFSName STRING
  eqlNASTaskContainerReplInfoLocalClusterId ClusterIdType
  eqlNASTaskContainerReplInfoTaskId Unsigned32

EqlNASLostContainerEntry  
SEQUENCE    
  eqlNASLostContainerRowStatus RowStatus
  eqlNASLostContainerName STRING
  eqlNASLostContainerCapacity Unsigned32
  eqlNASLostContainerUsedSpaceAlert Unsigned32
  eqlNASLostContainerSnapshotUsedSpaceAlert Unsigned32

EqlNASSanStaticRouteEntry  
SEQUENCE    
  eqlNASSanStaticRouteRowStatus RowStatus
  eqlNASSanStaticRouteNetworkAddrType InetAddressType
  eqlNASSanStaticRouteNetworkAddr InetAddress
  eqlNASSanStaticRouteNetworkMaskType InetAddressType
  eqlNASSanStaticRouteNetworkMask InetAddress
  eqlNASSanStaticRouteGatewayAddrType InetAddressType
  eqlNASSanStaticRouteGatewayAddr InetAddress

Defined Values

eqlNASModule 1.3.6.1.4.1.12740.18
Appliances information. Copyright (c) 2004-2011 by Dell, Inc. All rights reserved. This software may not be copied, disclosed, transferred, or used except in accordance with a license granted by Dell, Inc. This software embodies proprietary information and trade secrets of Dell, Inc.
MODULE-IDENTITY    

eqlNASObjects 1.3.6.1.4.1.12740.18.1
OBJECT IDENTIFIER    

eqlNASApplianceTable 1.3.6.1.4.1.12740.18.1.1
EqualLogic-Persistent Appliance Table. This table contains a list of NAS pools that this group is managing. TimeoutAll:60
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASApplianceEntry

eqlNASApplianceEntry 1.3.6.1.4.1.12740.18.1.1.1
An entry (row) containing NAS Container info.
OBJECT-TYPE    
  EqlNASApplianceEntry  

eqlNASApplianceRowStatus 1.3.6.1.4.1.12740.18.1.1.1.1
This field is used indicate the status of this entry.
OBJECT-TYPE    
  RowStatus  

eqlNASAppliancePoolSize 1.3.6.1.4.1.12740.18.1.1.1.2
This field is used indicate the size of the NAS Container in MB.
OBJECT-TYPE    
  Unsigned32  

eqlNASApplianceEQLPoolIndex 1.3.6.1.4.1.12740.18.1.1.1.3
This field is used to indicate the EQL pool used by the NAS appliance.
OBJECT-TYPE    
  Unsigned32  

eqlNASApplianceReplRemoteUserName 1.3.6.1.4.1.12740.18.1.1.1.4
This field is used to indicate the Username EQL will use for NAS replication for all partners.
OBJECT-TYPE    
  STRING Size(0..32)  

eqlNASApplianceNFSv4Mode 1.3.6.1.4.1.12740.18.1.1.1.5
This field enables or disables NFSv4 Access NAS appliance.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

eqlNASContainerTable 1.3.6.1.4.1.12740.18.1.3
EqualLogic-Dynamic Appliance Table. This table contains a list of NAS Appliance configurations for containers the group is managing. TimeoutAll:60
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASContainerEntry

eqlNASContainerEntry 1.3.6.1.4.1.12740.18.1.3.1
An entry (row) containing NAS Container info.
OBJECT-TYPE    
  EqlNASContainerEntry  

eqlNASContainerIndex 1.3.6.1.4.1.12740.18.1.3.1.1
Unique Identifier used to create and manage NAS Containers. When creating NAS Containers, value must be retrieved using eqlApplianceUniqueIDValue with eqlApplianceUniqueIDType set to fsid.
OBJECT-TYPE    
  Unsigned32  

eqlNASContainerRowStatus 1.3.6.1.4.1.12740.18.1.3.1.2
Row status variable used to manage this row.
OBJECT-TYPE    
  RowStatus  

eqlNASContainerName 1.3.6.1.4.1.12740.18.1.3.1.3
Name used to identify NAS Container. Contains only letters, digits and underscores. Must begin with either letter or an underscore.
OBJECT-TYPE    
  STRING Size(1..230)  

eqlNASContainerCapacity 1.3.6.1.4.1.12740.18.1.3.1.4
Size of NAS Container in MB.
OBJECT-TYPE    
  Unsigned32  

eqlNASContainerUsedSpaceAlert 1.3.6.1.4.1.12740.18.1.3.1.5
Alert user when NAS container used space reaches certain % value of NAS container size.Default value is choosen from eqlNASApplianceConfigUsedSpaceAlert
OBJECT-TYPE    
  Unsigned32  

eqlNASContainerSnapshotHardQuota 1.3.6.1.4.1.12740.18.1.3.1.6
This threshold, represented as a % of NAS container size, triggers auto-deletion of snapshots. The oldest snapshots are deleted first. Default value is choosen from eqlNASApplianceConfigSnapHardQuota
OBJECT-TYPE    
  Unsigned32  

eqlNASContainerSnapshotUsedSpaceAlert 1.3.6.1.4.1.12740.18.1.3.1.7
Alert user when NAS container snapshot used space reaches certain % value of NAS container snapshot size.Default value is choosen from eqlNASApplianceConfigSnapSpaceAlert
OBJECT-TYPE    
  Unsigned32  

eqlNASContainerUnixFilePermissions 1.3.6.1.4.1.12740.18.1.3.1.8
This field is applicable only when Security style is set to NFS
OBJECT-TYPE    
  UNIXPermissions  

eqlNASContainerUnixDirPermissions 1.3.6.1.4.1.12740.18.1.3.1.9
This field is applicable only when Security style is set to NFS
OBJECT-TYPE    
  UNIXPermissions  

eqlNASContainerQuotaEnabled 1.3.6.1.4.1.12740.18.1.3.1.10
Tok_String
OBJECT-TYPE    
  TruthValue  

eqlNASContainerFileAccessSecurity 1.3.6.1.4.1.12740.18.1.3.1.11
Tok_String
OBJECT-TYPE    
  INTEGER mixed(1), ntfs(2), unix(3)  

eqlNASContainerAccessTimeManagementGranularity 1.3.6.1.4.1.12740.18.1.3.1.12
Access time management granularity.
OBJECT-TYPE    
  INTEGER disabled(0), always(1), everyFiveMinutes(2), hourly(3), daily(4), weekly(5)  

eqlNASContainerOptimizationEnabled 1.3.6.1.4.1.12740.18.1.3.1.13
Enable or disable optimization
OBJECT-TYPE    
  TruthValue  

eqlNASContainerDedupMethodType 1.3.6.1.4.1.12740.18.1.3.1.14
Dedup method to use on this file system when optimization is enabled. Reserved for future use. Currently not supported.
OBJECT-TYPE    
  INTEGER variable-chunk(1), object(2)  

eqlNASContainerCompressionEnabled 1.3.6.1.4.1.12740.18.1.3.1.15
enable or disable compression. Restricted by the type of license
OBJECT-TYPE    
  TruthValue  

eqlNASContainerModificationTimeFilter 1.3.6.1.4.1.12740.18.1.3.1.16
Exclude files modified less than the specified number of days before. 30 to 365 days
OBJECT-TYPE    
  INTEGER 30..365  

eqlNASContainerAccessTimeFilter 1.3.6.1.4.1.12740.18.1.3.1.17
Exclude files accessed less than the specified number of days before. 30 to 365 days
OBJECT-TYPE    
  INTEGER 30..365  

eqlNASContainerExcludeFilesByNamePattern 1.3.6.1.4.1.12740.18.1.3.1.18
Regular expression identifying the file name pattern to exclude from optimization. Empty string means no exclusion.
OBJECT-TYPE    
  STRING Size(1..256)  

eqlNASContainerAction 1.3.6.1.4.1.12740.18.1.3.1.19
Use this column to perform actions on this container.
OBJECT-TYPE    
  INTEGER none(0), delete-host-access-cfg(1)  

eqlNASContainerDefaultUserQuota 1.3.6.1.4.1.12740.18.1.3.1.20
Default quota per user when quotas are enabled on NAS Containers.
OBJECT-TYPE    
  Unsigned32  

eqlNASContainerDefaultUserQuotaAlert 1.3.6.1.4.1.12740.18.1.3.1.21
Specified as a percentage of default group quota as a default for containers in this nas-group. This is the amount of used space that triggers user alerts
OBJECT-TYPE    
  Unsigned32  

eqlNASContainerDefaultGroupQuota 1.3.6.1.4.1.12740.18.1.3.1.22
Default quota per group when quotas are enabled on NAS Containers.
OBJECT-TYPE    
  Unsigned32  

eqlNASContainerDefaultGroupQuotaAlert 1.3.6.1.4.1.12740.18.1.3.1.23
Specified as a percentage of default group quota as a default for containers in this nas-group. This is the amount of used space that triggers user alerts
OBJECT-TYPE    
  Unsigned32  

eqlNASContainerOptimizationFilterMode 1.3.6.1.4.1.12740.18.1.3.1.24
Specifies the filter mode to be applied to qualify files for data reduction. user-filters implies files need to meet the access time and modify time filter criteria before they can be considered for data reduction. ignore-filters implies files are considered for data reduction irrespective of the access time and modify time filter criteria, using an access time and modification time value of 1 day. This mode is recommended for containers with archive data only.
OBJECT-TYPE    
  INTEGER use-filters(0), ignore-filters(1)  

eqlNASContainerRehydrateOnReadEnabled 1.3.6.1.4.1.12740.18.1.3.1.25
Enable or disable rehydrate on read in a data reduction disabled nas container
OBJECT-TYPE    
  TruthValue  

eqlNASContainerUniqueIDTable 1.3.6.1.4.1.12740.18.1.3.2
EqualLogic-Dynamic Unique ID table. This table is used to retrieve Unique ID values when creating new objects. TimeoutAll:60
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASContainerUniqueIDEntry

eqlNASContainerUniqueIDEntry 1.3.6.1.4.1.12740.18.1.3.2.1
An entry (row) containing unique ID information.
OBJECT-TYPE    
  EqlNASContainerUniqueIDEntry  

eqlNASContainerUniqueIDType 1.3.6.1.4.1.12740.18.1.3.2.1.1
Indicates the type of the id. For now only Snapshot and quota Ids are needed for at the container scope
OBJECT-TYPE    
  INTEGER snapshot(1), quota(2)  

eqlNASContainerUniqueIDValueLen 1.3.6.1.4.1.12740.18.1.3.2.1.2
Length of the value represented by column eqlNASContainerUniqueIDValue
OBJECT-TYPE    
  Unsigned32  

eqlNASContainerUniqueIDValue 1.3.6.1.4.1.12740.18.1.3.2.1.3
Value of eqlNASContainerUniqueIDType represented in network byte order.
OBJECT-TYPE    
  STRING Size(255)  

eqlNASApplianceDefaultCfgTable 1.3.6.1.4.1.12740.18.1.4
EqualLogic-Dynamic (semi) Appliance Table. This table contains a list of NAS Appliance default configurations for containers the group is managing. TimeoutAll:60
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASApplianceDefaultCfgEntry

eqlNASApplianceDefaultCfgEntry 1.3.6.1.4.1.12740.18.1.4.1
An entry (row) containing NAS Container Status info.
OBJECT-TYPE    
  EqlNASApplianceDefaultCfgEntry  

eqlNASApplianceConfigUsedSpaceAlert 1.3.6.1.4.1.12740.18.1.4.1.1
Specified as a percentage of NAS container size as a default for containers in this nas-group. This is the amount of used space that triggers user alerts
OBJECT-TYPE    
  Unsigned32  

eqlNASApplianceConfigSnapSpaceAlert 1.3.6.1.4.1.12740.18.1.4.1.2
Specified as a percentage of NAS container size as a default for containers in this nas-group. The is the amount of space consumed by snapshots at which user alerts are triggered
OBJECT-TYPE    
  Unsigned32  

eqlNASApplianceConfigSnapHardQuota 1.3.6.1.4.1.12740.18.1.4.1.3
Specified as a percentage of NAS container size as a default for containers in this nas-group. This is the threshold that triggers auto-deletion of snapshots. Oldest first.
OBJECT-TYPE    
  Unsigned32  

eqlNASApplianceContainerUnixFilePerms 1.3.6.1.4.1.12740.18.1.4.1.4
Define the default UNIX permissions of new files created from Windows clients. Default value is 0744
OBJECT-TYPE    
  UNIXPermissions  

eqlNASApplianceContainerUnixDirPerms 1.3.6.1.4.1.12740.18.1.4.1.5
Define the default UNIX permissions of new directories created from Windows clients. Default value is 0755
OBJECT-TYPE    
  UNIXPermissions  

eqlNASApplianceContainerFileSecurity 1.3.6.1.4.1.12740.18.1.4.1.6
Used to define how the system will maintain and verify file access security.
OBJECT-TYPE    
  INTEGER mixed(1), ntfs(2), unix(3)  

eqlNASApplianceDefaultUserQuota 1.3.6.1.4.1.12740.18.1.4.1.7
Default quota per user when quotas are enabled on NAS Containers.
OBJECT-TYPE    
  Unsigned32  

eqlNASApplianceDefaultUserQuotaAlert 1.3.6.1.4.1.12740.18.1.4.1.8
Specified as a percentage of default group quota as a default for containers in this nas-group. This is the amount of used space that triggers user alerts
OBJECT-TYPE    
  Unsigned32  

eqlNASApplianceDefaultGroupQuota 1.3.6.1.4.1.12740.18.1.4.1.9
Default quota per group when quotas are enabled on NAS Containers.
OBJECT-TYPE    
  Unsigned32  

eqlNASApplianceDefaultGroupQuotaAlert 1.3.6.1.4.1.12740.18.1.4.1.10
Specified as a percentage of default group quota as a default for containers in this nas-group. This is the amount of used space that triggers user alerts
OBJECT-TYPE    
  Unsigned32  

eqlNASApplianceDefaultCIFSAllowGuestAccess 1.3.6.1.4.1.12740.18.1.4.1.11
Choose whether to allow unknown users to access the share as guests.
OBJECT-TYPE    
  TruthValue  

eqlNASApplianceCIFSAuthenticationMode 1.3.6.1.4.1.12740.18.1.4.1.12
Tok_String
OBJECT-TYPE    
  INTEGER allow-everyone(1), active-directory(2), local-users(3)  

eqlNASApplianceDefaultCIFSLockEnforcement 1.3.6.1.4.1.12740.18.1.4.1.13
Define the types of locks that the system will enforce, in addition to share locks which are always enforced. Byte range locks allow applications to ensure data integrity. Opportunistic locks (oplocks) increase the efficiency of client machine caching and improve performance. NOTE: This software release does not support changing the locking enforcement policy. Only the default option (all-locks) is supported.
OBJECT-TYPE    
  INTEGER all-locks(0), share-locks-op-locks(1), only-share-locks(2)  

eqlNASApplianceNFSExportReadWrite 1.3.6.1.4.1.12740.18.1.4.1.14
Define the access rights for the NFS export. If the access rights for the NFS export are stricter than those defined for a specific file, the file's access rights will be overridden by those of the NFS export.
OBJECT-TYPE    
  INTEGER read-write(1), read-only(2)  

eqlNASApplianceNFSExportTrustedUsers 1.3.6.1.4.1.12740.18.1.4.1.15
Define which users are trusted. Other users will be identified as guests.
OBJECT-TYPE    
  INTEGER all-except-root(1), none(2), all(3)  

eqlNASApplianceAccessTimeManagementGranularity 1.3.6.1.4.1.12740.18.1.4.1.16
Access time management granularity.
OBJECT-TYPE    
  INTEGER disabled(0), always(1), everyFiveMinutes(2), hourly(3), daily(4), weekly(5)  

eqlNASApplianceOptimizationEnabled 1.3.6.1.4.1.12740.18.1.4.1.17
Enable or disable optimization. Reserved for future use. Not supported currently.
OBJECT-TYPE    
  TruthValue  

eqlNASApplianceDedupMethodType 1.3.6.1.4.1.12740.18.1.4.1.18
Dedup method to use on this file system when optimization is enabled. Reserved for future use. Currently not supported.
OBJECT-TYPE    
  INTEGER variable-chunk(1), object(2)  

eqlNASApplianceCompressionEnabled 1.3.6.1.4.1.12740.18.1.4.1.19
enable or disable compression. Restricted by the type of license. Reserved for future use. Not supported currently.
OBJECT-TYPE    
  TruthValue  

eqlNASApplianceModificationTimeFilter 1.3.6.1.4.1.12740.18.1.4.1.20
Exclude files modified less than the specified number of days before. 30 to 365 days.
OBJECT-TYPE    
  INTEGER 30..365  

eqlNASApplianceAccessTimeFilter 1.3.6.1.4.1.12740.18.1.4.1.21
Exclude files accessed less than the specified number of days before. 30 to 365 days.
OBJECT-TYPE    
  INTEGER 30..365  

eqlNASApplianceExcludeFilesByNamePattern 1.3.6.1.4.1.12740.18.1.4.1.22
Regular expression identifying the file name pattern to exclude from optimization. Empty string means no exclusion.
OBJECT-TYPE    
  STRING Size(1..256)  

eqlNASApplianceDefaultCIFSAntivirusEnabled 1.3.6.1.4.1.12740.18.1.4.1.23
Default which determines whether the antivirus service is disabled or enabled for a CIFS share at the time of creation.
OBJECT-TYPE    
  StatusDisabledDefault  

eqlNASApplianceDefaultCIFSAntivirusPolicy 1.3.6.1.4.1.12740.18.1.4.1.24
Default which determines the action to be taken on a virus-infected file. This field is deprecated and unsupported. The value now always will be quarantine(0).
OBJECT-TYPE    
  INTEGER quarantine(0), do-nothing(1), remove(2)  

eqlNASApplianceDefaultCIFSAntivirusExtensions 1.3.6.1.4.1.12740.18.1.4.1.25
Default which determines which files should be / should not be scanned for viruses. This is a comma-separated list. The value of the next field determines if the files with the corresponding extensions will be scanned or not for viruses. Cannot contain wild characters * and ?. Extensions are case-insensitive.
OBJECT-TYPE    
  STRING Size(0..255)  

eqlNASApplianceDefaultCIFSAntivirusExtensionsPolicy 1.3.6.1.4.1.12740.18.1.4.1.26
Default which determines whether the files whose extensions match with those specified in the field above should be scanned OR should not be scanned for viruses. This field is deprecated and unsupported. The value now always will be exclude(0).
OBJECT-TYPE    
  INTEGER exclude(0), include(1)  

eqlNASApplianceDefaultCIFSAntivirusExcludeDirPaths 1.3.6.1.4.1.12740.18.1.4.1.27
Default which determines the list of the directory paths which should not be scanned for viruses. It is a comma-separated list. Paths can contain wildcards * and ?. NOTE: * will not match several path components.
OBJECT-TYPE    
  STRING Size(0..512)  

eqlNASApplianceDefaultCIFSAntivirusLargeFileSize 1.3.6.1.4.1.12740.18.1.4.1.28
Default which determines the largest file size in MB which is sent to Antivirus server for scanning on the fly. The files larger than the specified size are not scanned. Access to these large files will be allowed or denied based on the CIFS Antivirus Large File Open option.
OBJECT-TYPE    
  Unsigned32  

eqlNASApplianceDefaultCIFSAntivirusLargeFileOpen 1.3.6.1.4.1.12740.18.1.4.1.29
Default which determines if CIFS clients are allowed to open files larger than the value defined by AntivirusLargeFileSize.
OBJECT-TYPE    
  INTEGER deny(0), allow(1)  

eqlNASApplianceDefaultNFSExportsFileId32bit 1.3.6.1.4.1.12740.18.1.4.1.30
Default option to trigger 32-bit compatibility mode for NFS export. When enabled, reported FileId (inode) information contains only lower 32-bits set. When disabled, reported FileId (inode) information contains full 64-bit values.
OBJECT-TYPE    
  INTEGER enabled(0), disabled(1)  

eqlNASContainerStatusTable 1.3.6.1.4.1.12740.18.1.5
EqualLogic-Dynamic NAS Container Table. This table contains a list of NAS Appliance configurations for containers the group is managing. TimeoutAll:60
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASContainerStatusEntry

eqlNASContainerStatusEntry 1.3.6.1.4.1.12740.18.1.5.1
An entry (row) containing NAS Container Status info.
OBJECT-TYPE    
  EqlNASContainerStatusEntry  

eqlNASContainerStatusConnections 1.3.6.1.4.1.12740.18.1.5.1.1
Tok_String
OBJECT-TYPE    
  Unsigned32  

eqlNASContainerStatusUsedSpace 1.3.6.1.4.1.12740.18.1.5.1.2
Space used by NAS Containers including both snapshot space and filesystem usage)
OBJECT-TYPE    
  Unsigned32  

eqlNASContainerStatusSnapshotSpace 1.3.6.1.4.1.12740.18.1.5.1.3
Amount of used space in MB used by NAS Containers for storage of snapshot data. This is not snapshot reserve but rather snapshot reserve space currently in use. Initially this value would be 0.
OBJECT-TYPE    
  Unsigned32  

eqlNASContainerStatusNumNFSExports 1.3.6.1.4.1.12740.18.1.5.1.4
Tok_String
OBJECT-TYPE    
  Unsigned32  

eqlNASContainerStatusNumCIFSShares 1.3.6.1.4.1.12740.18.1.5.1.5
Tok_String
OBJECT-TYPE    
  Unsigned32  

eqlNASContainerStatusAllocatedSpace 1.3.6.1.4.1.12740.18.1.5.1.6
Amount of space in MB allocated by NAS Containers
OBJECT-TYPE    
  Unsigned32  

eqlNASContainerStatusFreeSpace 1.3.6.1.4.1.12740.18.1.5.1.7
Amount of total free space in MB including both snapshot and filesystem
OBJECT-TYPE    
  Unsigned32  

eqlNASContainerStatusNumOfSnapshots 1.3.6.1.4.1.12740.18.1.5.1.8
Number of snapshots
OBJECT-TYPE    
  Unsigned32  

eqlNASContainerStatusOptimizationSpaceSavings 1.3.6.1.4.1.12740.18.1.5.1.9
Amount of space saved in MB due to applying optimization
OBJECT-TYPE    
  Unsigned32  

eqlNASContainerStatusOptimized 1.3.6.1.4.1.12740.18.1.5.1.10
True if optimization was enabled once, false otherwise
OBJECT-TYPE    
  TruthValue  

eqlNASContainerStatusReplState 1.3.6.1.4.1.12740.18.1.5.1.11
This column gives information about the replication status of this FileSystem. Standalone means the filesystem is not being replicated. Source means this filesystem is a source to a remote filesystem. Destination means this filesystem is destination for a source filesystem. Promoted means this filesystem used to be a destination but is right now promoted.
OBJECT-TYPE    
  INTEGER standalone(0), source(1), destination(2), promoted(3), not-available(4)  

eqlNASContainerStatusNextSnapshotID 1.3.6.1.4.1.12740.18.1.5.1.12
This column denotes the next SnapshotID avaiable for this particular container.
OBJECT-TYPE    
  Unsigned32  

eqlNASApplianceNFSExportsTable 1.3.6.1.4.1.12740.18.1.6
Equallogic-Dynamic NAS NFS Exports Table. This table contains a list of NFS exports configuration entry. TimeoutAll:60
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASApplianceNFSExportsEntry

eqlNASApplianceNFSExportsEntry 1.3.6.1.4.1.12740.18.1.6.1
An entry (row) containing NFS exports configuration.
OBJECT-TYPE    
  EqlNASApplianceNFSExportsEntry  

eqlNASApplianceNFSExportName 1.3.6.1.4.1.12740.18.1.6.1.1
Contains only letters, digits and underscores. Must begin with a letter.
OBJECT-TYPE    
  STRING Size(1..64)  

eqlNASApplianceNFSExportsRowStatus 1.3.6.1.4.1.12740.18.1.6.1.2
Rowstatus variable used to manage this conceptual row.
OBJECT-TYPE    
  RowStatus  

eqlNASApplianceNFSExportDirectory 1.3.6.1.4.1.12740.18.1.6.1.3
Full path to the Directory to be exported.
OBJECT-TYPE    
  STRING Size(1..512)  

eqlNASApplianceNFSAccess 1.3.6.1.4.1.12740.18.1.6.1.4
Tok_String
OBJECT-TYPE    
  INTEGER read-write(1), read-only(2)  

eqlNASApplianceNFSLimitReportedSize 1.3.6.1.4.1.12740.18.1.6.1.5
Default value is zero and it means the actual size of NFS export will be returned. When the value is non-zeo, this value will be used instead of actual NFS Export size.
OBJECT-TYPE    
  Unsigned32  

eqlNASApplianceNFSAccessClientIPType 1.3.6.1.4.1.12740.18.1.6.1.6
Type of eqlNASApplianceNFSAccessClientIP field.
OBJECT-TYPE    
  InetAddressType  

eqlNASApplianceNFSAccessClientIP 1.3.6.1.4.1.12740.18.1.6.1.7
Value of this column along with eqlNASApplianceNFSAccessClientNetmask will determine access policy for clients
OBJECT-TYPE    
  InetAddress  

eqlNASApplianceNFSAccessClientNetmaskType 1.3.6.1.4.1.12740.18.1.6.1.8
Type of eqlNASApplianceNFSAccessClientNetmask field. This value must match with eqlNASApplianceNFSAccessClientIPType field.
OBJECT-TYPE    
  InetAddressType  

eqlNASApplianceNFSAccessClientNetmask 1.3.6.1.4.1.12740.18.1.6.1.9
Value of this column along with eqlNASApplianceNFSAccessClientIP will determine access policy for clients
OBJECT-TYPE    
  InetAddress  

eqlNASApplianceNFSTrustUsers 1.3.6.1.4.1.12740.18.1.6.1.10
Trusted users who can access the NFS Export
OBJECT-TYPE    
  INTEGER all-except-root(1), none(2), all(3)  

eqlNASApplianceNFSExportsFileId32bit 1.3.6.1.4.1.12740.18.1.6.1.11
Determines 32-bit compatibility mode for this NFS export. When enabled, reported FileId (inode) information contains only lower 32-bits. When disabled, reported FileId (inode) information contains full 64-bit values.
OBJECT-TYPE    
  INTEGER enabled(0), disabled(1)  

eqlNASApplianceCIFSTable 1.3.6.1.4.1.12740.18.1.8
Equallogic-Dynamic NAS CIFS Table. This table contains a list of CIFS configuration entry. TimeoutAll:60
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASApplianceCIFSEntry

eqlNASApplianceCIFSEntry 1.3.6.1.4.1.12740.18.1.8.1
An entry (row) containing CIFS configuration.
OBJECT-TYPE    
  EqlNASApplianceCIFSEntry  

eqlNASApplianceCIFSShareName 1.3.6.1.4.1.12740.18.1.8.1.1
Contains only letters, digits and underscores.
OBJECT-TYPE    
  STRING Size(1..64)  

eqlNASApplianceCIFSRowStatus 1.3.6.1.4.1.12740.18.1.8.1.2
Rowstatus variable used to manage this conceptual row.
OBJECT-TYPE    
  RowStatus  

eqlNASApplianceCIFSExportedDirectory 1.3.6.1.4.1.12740.18.1.8.1.3
Full Path to the directory to be exported.
OBJECT-TYPE    
  STRING Size(1..512)  

eqlNASApplianceCIFSAllowGuestAccess 1.3.6.1.4.1.12740.18.1.8.1.4
When set to true, guests will be allowed to access this share.
OBJECT-TYPE    
  TruthValue  

eqlNASApplianceCIFSLockEnforcement 1.3.6.1.4.1.12740.18.1.8.1.5
Locking enforcement policy for this CIFS Share. This software release does not support changing the locking enforcement policy. Only the default option (all-locks) is supported.
OBJECT-TYPE    
  INTEGER all-locks(0), no-byte-range-locks(1), only-share-locks(2)  

eqlNASApplianceCIFSAntivirusEnabled 1.3.6.1.4.1.12740.18.1.8.1.6
When set to enabled, antivirus service will be enabled for this share. Else it will be disabled.
OBJECT-TYPE    
  StatusDisabledDefault  

eqlNASApplianceCIFSAntivirusPolicy 1.3.6.1.4.1.12740.18.1.8.1.7
Determines the action to take when a file is found to be infected by a virus. This field is deprecated and unsupported. The value now always will be quarantine(0).
OBJECT-TYPE    
  INTEGER quarantine(0), do-nothing(1), remove(2)  

eqlNASApplianceCIFSAntivirusExtensions 1.3.6.1.4.1.12740.18.1.8.1.8
Comma-separated list of the file extensions which should / should not be virus-scanned. The value of the next field i.e. eqlNASApplianceCIFSAntivirusExtensionsPolicy determines if the files with the corresponding extensions will be scanned or not for viruses. Cannot contain wild characters * and ?. Extensions are case-insensitive.
OBJECT-TYPE    
  STRING Size(0..255)  

eqlNASApplianceCIFSAntivirusExtensionsPolicy 1.3.6.1.4.1.12740.18.1.8.1.9
Determines whether the files whose extensions match with those specified in the field above i.e. eqlNASApplianceCIFSAntivirusExtensions, should be scanned OR should not be scanned for viruses. This field is deprecated and unsupported. The value now always will be exclude(0).
OBJECT-TYPE    
  INTEGER exclude(0), include(1)  

eqlNASApplianceCIFSAntivirusExcludeDirPaths 1.3.6.1.4.1.12740.18.1.8.1.10
Comma-separated list of the directory paths which should not be scanned for viruses. Paths can contain wildcards * and ?. NOTE: * will not match several path components.
OBJECT-TYPE    
  STRING Size(0..512)  

eqlNASApplianceCIFSAntivirusLargeFileSize 1.3.6.1.4.1.12740.18.1.8.1.11
Determines the largest file size in MB which is sent to Antivirus server for scanning on the fly. The files larger than the specified size are not scanned. Access to these large files will be allowed or denied based on the CIFS Antivirus Large File Open policy.
OBJECT-TYPE    
  Unsigned32  

eqlNASApplianceCIFSAntivirusLargeFileOpen 1.3.6.1.4.1.12740.18.1.8.1.12
Determines if CIFS clients are allowed to open files larger than the value defined by CIFSAntivirusLargeFileSize.
OBJECT-TYPE    
  INTEGER deny(0), allow(1)  

eqlNASContainerDirectoryOpsTable 1.3.6.1.4.1.12740.18.1.9
Equallogic-Dynamic NAS Container Directory Operations Table. This table is used for directory operations. TimeoutAll:60
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASContainerDirectoryOpsEntry

eqlNASContainerDirectoryOpsEntry 1.3.6.1.4.1.12740.18.1.9.1
An entry for directory operations.
OBJECT-TYPE    
  EqlNASContainerDirectoryOpsEntry  

eqlNASContainerDirectoryOpsIndex 1.3.6.1.4.1.12740.18.1.9.1.1
This field specifies a unique index for identifying a NAS container directory ops entry.
OBJECT-TYPE    
  Unsigned32  

eqlNASContainerDirectoryRowStatus 1.3.6.1.4.1.12740.18.1.9.1.2
Rowstatus variable used to manage directories. Operations supported will be create and delete. Get and Getnext operations on this table will return error.
OBJECT-TYPE    
  RowStatus  

eqlNASContainerDirectoryName 1.3.6.1.4.1.12740.18.1.9.1.3
Full Path to the directory to be created or deleted. Ex: /home/user1. Create directory will fail if parent directory does not exist.
OBJECT-TYPE    
  STRING Size(1..512)  

eqlNASContainerDirectoryCaseInsensitive 1.3.6.1.4.1.12740.18.1.9.1.4
Determines whether the directory created is case insensitve or not.
OBJECT-TYPE    
  INTEGER yes(0), no(1)  

eqlNASSnapshotTable 1.3.6.1.4.1.12740.18.1.3.3
EqualLogic-Dynamic snapshot Table This table contains a list of snapshots associated with the associated container. TimeoutAll:60
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASSnapshotEntry

eqlNASSnapshotEntry 1.3.6.1.4.1.12740.18.1.3.3.1
An entry (row) containing snap shot info.
OBJECT-TYPE    
  EqlNASSnapshotEntry  

eqlNASSnapshotIndex 1.3.6.1.4.1.12740.18.1.3.3.1.1
This field specifies a unique index which identifies a NAScontainer SnapShot.
OBJECT-TYPE    
  Unsigned32  

eqlNASSnapshotRowStatus 1.3.6.1.4.1.12740.18.1.3.3.1.2
The rowstatus....
OBJECT-TYPE    
  RowStatus  

eqlNASSnapshotName 1.3.6.1.4.1.12740.18.1.3.3.1.3
This field specifies the friendly name used to identify a SnapShot. The name is auto-generated based on the NAScontainer name, optionally it can be provided or changed after the fact by the administrator.
OBJECT-TYPE    
  STRING Size(1..230)  

eqlNASSnapshotSize 1.3.6.1.4.1.12740.18.1.3.3.1.4
This field specifies the amount of space in MB a SnapShot consumes. Note: Deleting the SnapShot is not guaranteed to return the space specified, since a single block can be associated with multiple SnapShots. This value is xxxxc.
OBJECT-TYPE    
  Integer32  

eqlNASSnapshotTimestamp 1.3.6.1.4.1.12740.18.1.3.3.1.5
EQL-SECONDARY-KEY This field specifies the creation date/time for snapshot. Time is represented as the time in seconds since 00:00:00 UTC, 1970-01-01.
OBJECT-TYPE    
  Counter32  

eqlNASSnapshotRollBack 1.3.6.1.4.1.12740.18.1.3.3.1.6
True indicates the NASContainer is to be resotred to the state of this Snapshot.
OBJECT-TYPE    
  TruthValue  

eqlNASSnapshotPolicyIdx 1.3.6.1.4.1.12740.18.1.3.3.1.7
This value identifies the snapshot policy for this snapshot.
OBJECT-TYPE    
  Integer32  

eqlNASSnapshotPolicyTable 1.3.6.1.4.1.12740.18.1.3.4
EqualLogic-Persistent NAS SnapSnot Policy Table. TimeoutAll:60
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASSnapshotPolicyEntry

eqlNASSnapshotPolicyEntry 1.3.6.1.4.1.12740.18.1.3.4.1
An entry (row) containing NAS snapshot scheduling policy information.The policy determines when to create snapshot(s) of a appliance container.
OBJECT-TYPE    
  EqlNASSnapshotPolicyEntry  

eqlNASSnapshotPolicyIndex 1.3.6.1.4.1.12740.18.1.3.4.1.1
This value uniquely identifies the snapshot policies for a container.
OBJECT-TYPE    
  Integer32  

eqlNASSnapshotPolicyRowStatus 1.3.6.1.4.1.12740.18.1.3.4.1.2
This value is used to manage the conceptual row.
OBJECT-TYPE    
  RowStatus  

eqlNASSnapshotPolicyName 1.3.6.1.4.1.12740.18.1.3.4.1.3
This value specifies user friendly name for the policy. It is unique within the context of a volume. Spaces are not allowed.
OBJECT-TYPE    
  STRING Size(1..64)  

eqlNASSnapshotPolicyMaxKeep 1.3.6.1.4.1.12740.18.1.3.4.1.6
The value of this object determines the maximum no of snapshots created by this policy that can exist at a given time. When number of snapshots created by this policy reaches this value, for creating a new snapshot oldest snapshot created using this policy will be deleted. In a set operation, if the new value of this object is less than the old value, required number of oldest snapshots created by this policy will be deleted.
OBJECT-TYPE    
  Integer32 1..2147483647  

eqlNASSnapshotPolicyType 1.3.6.1.4.1.12740.18.1.3.4.1.7
The value of this object determines the basic type of this policy. Except when set to once, the effective repetition period of the policy is determined using the value of this object along with the value of eqlNASSnapshotPolicyRepeatFactor. (See description of eqlNASSnapshotPolicyRepeatFactor for more information.)
OBJECT-TYPE    
  INTEGER once(1), daily(2), weekly(3), monthly(4), hourly(5)  

eqlNASSnapshotPolicyRepeatFactor 1.3.6.1.4.1.12740.18.1.3.4.1.8
The value of this object along with eqlNASSnapshotPolicyType determines the effective repetition interval for this policy. The valid values are PolicyType RepeatFactor once 1 hourly 1 daily 1-2147483647 weekly 1-2147483647 monthly 1-2147483647 If the policy type is daily and the value of this object is 2, snapshots will be taken once in every 2 days.
OBJECT-TYPE    
  Integer32 1..2147483647  

eqlNASSnapshotPolicyStartTime 1.3.6.1.4.1.12740.18.1.3.4.1.9
The value of this object represents the time to start creating snapshot(s) within a day expressed as number of minutes from 12:00AM. The maximum value for this column is 24*60-1 which represents 11:59PM.
OBJECT-TYPE    
  Integer32 0..1439  

eqlNASSnapshotPolicyEndTime 1.3.6.1.4.1.12740.18.1.3.4.1.10
The value of this object represents the time to stop creating snapshot(s) within a day expressed as number of minutes from 12:00AM. The maximum value for this column is 24*60-1 which represents 11:59PM. If eqlNASSnapshotPolicyType is once, the value of this column doesn't have any significance. If the value of this column is greater than start time, it represents end-time on the same day as start time. If the value is less than or equal to start time, it represents end-time on the next day of start time. This value doesnt have significance when frequency is set to zero. Endtime is exclusive when calculating no of snapshots. Example: StartTime EndTime Frequency NoofSnapshots 1320(10pm) 1380(11pm) 30mins 2 1320(10pm) 240(4am) 60mins 6 1320(10pm) 1320(10pm) 60mins 24 1320(10pm) 1319(9:59pm) 60mins 24 1320(10pm) - 0mins 1
OBJECT-TYPE    
  Integer32 0..1439  

eqlNASSnapshotPolicyTimeFrequency 1.3.6.1.4.1.12740.18.1.3.4.1.11
The value of this object determines how frequent snapshots must be taken between start time and end time. This value doesn't have significance when policy type is set to once. For other policytypes, the value of end time is exclusive. For example if starttime is 180 (3:00AM) and endtime is 240(4:00AM), when frequency is set to 30, snapshots will be created at 3:00AM, 3:30AM. If the value is zero, it represents invalid frequency and in such case, end time doesnt have significance.
OBJECT-TYPE    
  Integer32 0..1439  

eqlNASSnapshotPolicyStartDate 1.3.6.1.4.1.12740.18.1.3.4.1.12
The value of this object determines the date from which the policy will be active. By default, this is the policy creation date. The value is expressed as number of days since epoch.
OBJECT-TYPE    
  Integer32 0..2147483647  

eqlNASSnapshotPolicyEndDate 1.3.6.1.4.1.12740.18.1.3.4.1.13
The value of this object determines the date after which the policy will be inactive.It doesnt have significance when policy type is once. Default value is the mamixum value allowed. When set to maximum value, the policy will be active until it gets deleted. The value is expressed as number of days since epoch.
OBJECT-TYPE    
  Integer32 0..2147483647  

eqlNASSnapshotPolicyWeekMask 1.3.6.1.4.1.12740.18.1.3.4.1.14
The value of this column is significant only if policytype is set to weekly or monthly. When the value is 0x7fffffff, it represents a special meaning to the value of occurence. See the description for occurence below. The LSB to LSB+6 bits of the mask are significant. Each bit represents a day in the week with LSB being Mon and LSB+6 being Sun. If mask is 0x00000041 - snapshots will be created on Monday and Sunday. If mask is 0x0000007f - snapshots will be created on all weekdays which is effectively a daily policy. If mask is 0x0000001f, it represents week days.If mask is 0x00000060, it represents weekend days.
OBJECT-TYPE    
  Integer32  

eqlNASSnapshotPolicyMonthMask 1.3.6.1.4.1.12740.18.1.3.4.1.15
The value of this column is currently not being used.
OBJECT-TYPE    
  Integer32  

eqlNASSnapshotPolicyOccurence 1.3.6.1.4.1.12740.18.1.3.4.1.17
The value of this column is significant only if the policy type is set to monthly. If weekmask is set to 0x7fffffff, the value of this column represents the occurence of a day with in a month. Example:If the value of this column is 5, it represents 5th day of the month. When the week mask is set to a value other than 0x7fffffff, the value of this column defines the occurence of a day as defined by weekmask. Example: When weekmask is set to 0x00000001 (Monday) and value of this column represents the following. Value Meaning 0x1 First monday of the month 0x2 Second monday of the month 0x3 Third monday of the month 0x4 Fourth monday of the month 0x7fffffff Last monday of the month
OBJECT-TYPE    
  Integer32  

eqlNASSnapshotPolicyReplication 1.3.6.1.4.1.12740.18.1.3.4.1.18
When a row is created with this object set to a non-zero value, and a replication relationship has been configured for the base volume, the snapshots created will be queued to be replicated to the remote location as defined by the corresponding entry in the site table. The value for this object cannot be changed once the schedule is created.
OBJECT-TYPE    
  SiteIndexOrZero  

eqlNASSnapshotPolicyAdminStatus 1.3.6.1.4.1.12740.18.1.3.4.1.19
When disabled, the schedule will stop creating snapshots until re-enabled.
OBJECT-TYPE    
  INTEGER enable(0), disable(1)  

eqlNASSnapshotPolicyCategory 1.3.6.1.4.1.12740.18.1.3.4.1.20
Set to optimization-policy, if the schedule is for data reduction. Set to optimization-default-policy if the schedule is default data reduction policy. Default data reduction policy is created automatically and not allowed to be deleted.
OBJECT-TYPE    
  INTEGER snapshot-replication-policy(0), optimization-policy(1), optimization-default-policy(2)  

eqlNASSnapshotPolicyStatusTable 1.3.6.1.4.1.12740.18.1.3.5
EqualLogic-Dynamic NAS SnapSnot Policy Table. TimeoutAll:60
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASSnapshotPolicyStatusEntry

eqlNASSnapshotPolicyStatusEntry 1.3.6.1.4.1.12740.18.1.3.5.1
An entry containing NAS snapshot scheduling policy information.
OBJECT-TYPE    
  EqlNASSnapshotPolicyStatusEntry  

eqlNASSnapshotPolicyStatusNextCreate 1.3.6.1.4.1.12740.18.1.3.5.1.1
The value of this column represents number of seconds since epoch at which the next snapshot by this policy is going to be created.
OBJECT-TYPE    
  Counter32  

eqlNASSnapshotPolicyStatusOperStatus 1.3.6.1.4.1.12740.18.1.3.5.1.2
The value of this column represents the current operational status of this policy. The policy status is set to expired after end date. The policy status is set to active for optimization policies which are currently running.
OBJECT-TYPE    
  INTEGER enabled(0), disabled(1), expired(2), active(3)  

eqlNASQuotaTable 1.3.6.1.4.1.12740.18.1.3.6
EqualLogic-Dynamic quota Table This table contains a list of quotas associated with the associated container. TimeoutAll:60
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASQuotaEntry

eqlNASQuotaEntry 1.3.6.1.4.1.12740.18.1.3.6.1
An entry (row) containing quota info.
OBJECT-TYPE    
  EqlNASQuotaEntry  

eqlNASQuotaRowStatus 1.3.6.1.4.1.12740.18.1.3.6.1.1
The rowstatus....
OBJECT-TYPE    
  RowStatus  

eqlNASQuotaTargetType 1.3.6.1.4.1.12740.18.1.3.6.1.2
Type of target for this quota definition row
OBJECT-TYPE    
  INTEGER unused(0), allofgroup(1), anyuseringroup(2), user(3), defaultuser(4), defaultgroup(5), allquotas(6)  

eqlNASQuotaTargetName 1.3.6.1.4.1.12740.18.1.3.6.1.3
The name of the user or group as indicated by the target type. AD groups can be 129 bytes
OBJECT-TYPE    
  STRING Size(1..129)  

eqlNASQuotaWarnLimit 1.3.6.1.4.1.12740.18.1.3.6.1.4
This field specifies the amount of space in MB at which an alert is generated.
OBJECT-TYPE    
  Integer32  

eqlNASQuotaHardLimit 1.3.6.1.4.1.12740.18.1.3.6.1.5
This field specifies the amount of space in MB at which writes are disallowed.
OBJECT-TYPE    
  Unsigned32  

eqlNASQuotaUsage 1.3.6.1.4.1.12740.18.1.3.6.1.6
This field specifies the amount of space in MB currently in use by targetname.
OBJECT-TYPE    
  Integer32  

eqlNASReplSiteTable 1.3.6.1.4.1.12740.18.1.10
EqualLogic-Persistent TimeoutAll:60
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASReplSiteEntry

eqlNASReplSiteEntry 1.3.6.1.4.1.12740.18.1.10.1
Tok_String
OBJECT-TYPE    
  EqlNASReplSiteEntry  

eqlNASReplSitePartnershipId 1.3.6.1.4.1.12740.18.1.10.1.1
This is the partnership Id used by Exastore to identify the partnership in the XML API
OBJECT-TYPE    
  Unsigned32  

eqlNASReplSiteRowStatus 1.3.6.1.4.1.12740.18.1.10.1.2
The status of the row
OBJECT-TYPE    
  RowStatus  

eqlNASReplSiteVolumeReplSiteIndex 1.3.6.1.4.1.12740.18.1.10.1.3
The value of eqliscsiVolumeReplSiteIndex to index into eqliscsiVolumeReplSiteTable.
OBJECT-TYPE    
  SiteIndex  

eqlNASReplSiteLocalClusterInetAddrType 1.3.6.1.4.1.12740.18.1.10.1.4
The IP address type for the LocalCluster SAN VIP
OBJECT-TYPE    
  InetAddressType  

eqlNASReplSiteLocalClusterInetAddr 1.3.6.1.4.1.12740.18.1.10.1.5
The IP address for the LocalCluster SAN VIP
OBJECT-TYPE    
  InetAddress  

eqlNASReplSiteRemoteClusterInetAddrType 1.3.6.1.4.1.12740.18.1.10.1.6
The IP address type for the RemoteCluster SAN VIP
OBJECT-TYPE    
  InetAddressType  

eqlNASReplSiteRemoteClusterInetAddr 1.3.6.1.4.1.12740.18.1.10.1.7
The IP address for the RemoteCluster SAN VIP
OBJECT-TYPE    
  InetAddress  

eqlNASReplSitePartnershipState 1.3.6.1.4.1.12740.18.1.10.1.8
This field gives the state of the partnership. enabled means the user has enabled NAS replication for this partnership. congiured means that we have configured this partnership with exastore. The state will always start with enabled, and then convert to configured once we push the partnership down to exastore.
OBJECT-TYPE    
  INTEGER none(0), enabled(1), configured(2)  

eqlNASReplSiteUserName 1.3.6.1.4.1.12740.18.1.10.1.9
The replication username for the remote site. This is only used for senind messages to spartan agent.
OBJECT-TYPE    
  STRING Size(0..255)  

eqlNASReplSitePassword 1.3.6.1.4.1.12740.18.1.10.1.10
The replication usernames password for the remote site. This is only used for senind messages to spartan agent.
OBJECT-TYPE    
  STRING Size(0..255)  

eqlNASReplSiteRemoteClusterName 1.3.6.1.4.1.12740.18.1.10.1.11
This field specifies the partners cluster name, which is the remote eqlApplianceName.
OBJECT-TYPE    
  STRING Size(1..64)  

eqlNASReplSiteAction 1.3.6.1.4.1.12740.18.1.10.1.12
This column will be used to perform actions on this partnership. The configure action will be used to configure the partnership with Exastore. The delete action will be used to delete partnership at Exastore
OBJECT-TYPE    
  INTEGER none(0), configure(1), delete(2)  

eqlNASReplSiteRemoteUserName 1.3.6.1.4.1.12740.18.1.10.1.13
The replication username at the remote site. This is only used for senind messages to spartan agent. This is same as eqlNASApplianceReplRemoteUserName.
OBJECT-TYPE    
  STRING Size(0..32)  

eqlNASReplSiteRemotePassword 1.3.6.1.4.1.12740.18.1.10.1.14
The replication usernames password at the remote site. This is only used for senind messages to spartan agent.
OBJECT-TYPE    
  STRING Size(0..255)  

eqlNASReplSiteRemoteClusterId 1.3.6.1.4.1.12740.18.1.10.1.15
Get this string from node.
OBJECT-TYPE    
  ClusterIdType  

eqlNASReplSiteRemoteClusterMPV 1.3.6.1.4.1.12740.18.1.10.1.16
The Management Protocol Version (MPV) of the remote cluster.
OBJECT-TYPE    
  Unsigned32  

eqlNASReplSiteRemoteNetworkAddrType 1.3.6.1.4.1.12740.18.1.10.1.17
The IP address type (IPv4/IPv6) for the network ID of the remote cluster. NAS replication traffic is sent to this network. This is used for creating route to reach the remote cluster.
OBJECT-TYPE    
  InetAddressType  

eqlNASReplSiteRemoteNetworkAddr 1.3.6.1.4.1.12740.18.1.10.1.18
The network address/ID of the remote cluster. The network address/ID to reach the remote cluster NAS replication traffic is sent to this network.
OBJECT-TYPE    
  InetAddress  

eqlNASReplSiteRemoteNetworkMask 1.3.6.1.4.1.12740.18.1.10.1.19
The netmask of the remote network. NAS replication traffic is sent to this network. This is used for creating route to reach the remote cluster.
OBJECT-TYPE    
  InetAddress  

eqlNASReplicationTable 1.3.6.1.4.1.12740.18.1.11
EqualLogic-Dynamic TimeoutAll:60
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASReplicationEntry

eqlNASReplicationEntry 1.3.6.1.4.1.12740.18.1.11.1
Tok_String
OBJECT-TYPE    
  EqlNASReplicationEntry  

eqlNASReplicationId 1.3.6.1.4.1.12740.18.1.11.1.1
This is the replication Id used by Exastore to identify the replication in the XML API
OBJECT-TYPE    
  Unsigned32  

eqlNASReplicationRowStatus 1.3.6.1.4.1.12740.18.1.11.1.2
The status of the row
OBJECT-TYPE    
  RowStatus  

eqlNASReplicationLastRecoveryTime 1.3.6.1.4.1.12740.18.1.11.1.3
This field specifies the date/time of the last recovery snapshot that has been copied. Time is represented as the time in seconds since 00:00:00 UTC, 1970-01-01.
OBJECT-TYPE    
  Counter32  

eqlNASReplicationNextRecoveryTime 1.3.6.1.4.1.12740.18.1.11.1.4
This field specifies the date/time of the next recovery snapshot that will be copied. Time is represented as the time in seconds since 00:00:00 UTC, 1970-01-01.
OBJECT-TYPE    
  Counter32  

eqlNASReplicationSourceClusterName 1.3.6.1.4.1.12740.18.1.11.1.5
This field specifies the source cluster name, which is the eqlApplianceName of the cluster hosting the source FS.
OBJECT-TYPE    
  STRING Size(1..64)  

eqlNASReplicationSourceFSId 1.3.6.1.4.1.12740.18.1.11.1.6
Unique Identifier for the source FileSystem. This is the FSid.
OBJECT-TYPE    
  Unsigned32  

eqlNASReplicationSourceFSName 1.3.6.1.4.1.12740.18.1.11.1.7
Name used to identify the source NAS Container. Contains only letters, digits and underscores. Must begin with either letter or an underscore.
OBJECT-TYPE    
  STRING Size(1..230)  

eqlNASReplicationDestClusterName 1.3.6.1.4.1.12740.18.1.11.1.8
This field specifies the destination cluster name, which is the eqlApplianceName of the cluster hosting the destination FS.
OBJECT-TYPE    
  STRING Size(1..64)  

eqlNASReplicationDestFSId 1.3.6.1.4.1.12740.18.1.11.1.9
Unique Identifier for the destination FileSystem. This is the FSid.
OBJECT-TYPE    
  Unsigned32  

eqlNASReplicationDestFSName 1.3.6.1.4.1.12740.18.1.11.1.10
Name used to identify the destination NAS Container. Contains only letters, digits and underscores. Must begin with either letter or an underscore.
OBJECT-TYPE    
  STRING Size(1..230)  

eqlNASReplicationStatus 1.3.6.1.4.1.12740.18.1.11.1.11
The status of this replication relationship.
OBJECT-TYPE    
  EqlNASReplicationStatus  

eqlNASReplicationMinToComplete 1.3.6.1.4.1.12740.18.1.11.1.12
Minutes left in completion of the current replication process.
OBJECT-TYPE    
  Unsigned32  

eqlNASReplicationTransferredPer 1.3.6.1.4.1.12740.18.1.11.1.13
Provides a percent transferred for the current replication process.
OBJECT-TYPE    
  Unsigned32  

eqlNASReplicationAction 1.3.6.1.4.1.12740.18.1.11.1.14
Use this column to perform actions on this replication relationship.
OBJECT-TYPE    
  INTEGER none(0), replicate(1), pause(2), resume(3), cancel(4), demote(5), promote(6), force-promote(7), delete(8), force-delete(9), outbound-delete(100), outbound-force-delete(101), inbound-delete(102), inbound-promote(103), inbound-promote-restore-cfg(104), inbound-promote-keep-demote(105), inbound-promote-keep-demote-restore-cfg(106), inbound-delete-failback(107), inbound-delete-failback-restore-cfg(108), restore-cfg(109)  

eqlNASReplPartnerInfoMapTable 1.3.6.1.4.1.12740.18.1.12
EqualLogic-Dynamic This table is used to get the NAS cluster name for the replsite provided.
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASReplPartnerInfoMapEntry

eqlNASReplPartnerInfoMapEntry 1.3.6.1.4.1.12740.18.1.12.1
Tok_String
OBJECT-TYPE    
  EqlNASReplPartnerInfoMapEntry  

eqlNASReplPartnerInfoMapRowStatus 1.3.6.1.4.1.12740.18.1.12.1.1
The status of the row
OBJECT-TYPE    
  RowStatus  

eqlNASReplPartnerInfoMapClusterName 1.3.6.1.4.1.12740.18.1.12.1.2
This field specifies the partners cluster name, which is the remotes eqlApplianceName.
OBJECT-TYPE    
  STRING Size(1..64)  

eqlNASReplPartnerInfoMapClusterSanVIPType 1.3.6.1.4.1.12740.18.1.12.1.3
Type of eqlNASReplPartnerInfoMapClusterSanVIP field.
OBJECT-TYPE    
  InetAddressType  

eqlNASReplPartnerInfoMapClusterSanVIP 1.3.6.1.4.1.12740.18.1.12.1.4
Value of this column holds the SAN VIP of the remote cluster
OBJECT-TYPE    
  InetAddress  

eqlNASReplPartnerInfoMapClusterId 1.3.6.1.4.1.12740.18.1.12.1.5
String containing local cluster Id. It should be unique within the network. It is generated by IDC code.
OBJECT-TYPE    
  ClusterIdType  

eqlNASReplPartnerInfoMapClusterMPV 1.3.6.1.4.1.12740.18.1.12.1.6
The Management Protocol Version (MPV) of the cluster (usually remote).
OBJECT-TYPE    
  Unsigned32  

eqlNASReplPartnerInfoMapNetworkAddrType 1.3.6.1.4.1.12740.18.1.12.1.7
Type (IPv4 or IPv6) of the network where the partner is reachable.
OBJECT-TYPE    
  InetAddressType  

eqlNASReplPartnerInfoMapNetworkAddr 1.3.6.1.4.1.12740.18.1.12.1.8
The address/ID of the network where the partner is reachable.
OBJECT-TYPE    
  InetAddress  

eqlNASReplPartnerInfoMapNetworkMask 1.3.6.1.4.1.12740.18.1.12.1.9
The netmask of the network where the partner is reachable.
OBJECT-TYPE    
  InetAddress  

eqlNASReplPartnerIdMapTable 1.3.6.1.4.1.12740.18.1.13
EqualLogic-Dynamic This table is used to get the NAS partnership Id for the given remote NAS cluster name.
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASReplPartnerIdMapEntry

eqlNASReplPartnerIdMapEntry 1.3.6.1.4.1.12740.18.1.13.1
Tok_String
OBJECT-TYPE    
  EqlNASReplPartnerIdMapEntry  

eqlNASReplPartnerIdMapRowStatus 1.3.6.1.4.1.12740.18.1.13.1.1
The status of the row
OBJECT-TYPE    
  RowStatus  

eqlNASReplPartnerIdMapPartnershipId 1.3.6.1.4.1.12740.18.1.13.1.2
This is the partnership Id used by Exastore for the given eqlNASReplPartnerInfoMapClusterName.
OBJECT-TYPE    
  Unsigned32  

eqlNASContainerCfgTable 1.3.6.1.4.1.12740.18.1.14
EqualLogic-Dynamic This table is used to restore NAS file system configuration on given filesystem (a.k.a. container).
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASContainerCfgEntry

eqlNASContainerCfgEntry 1.3.6.1.4.1.12740.18.1.14.1
The index is composed of: * eqlApplianceIndex - appliance index of the cluster hosting the target FS, * eqlNASContainerIndex - container index of the target FS, * eqlNASContainerCfgIndex - unique identifer for the configuration applicable to the filesystem.
OBJECT-TYPE    
  EqlNASContainerCfgEntry  

eqlNASContainerCfgIndex 1.3.6.1.4.1.12740.18.1.14.1.1
Unique identifier of the configuration items set.
OBJECT-TYPE    
  Unsigned32  

eqlNASContainerCfgRowStatus 1.3.6.1.4.1.12740.18.1.14.1.2
The status of the row
OBJECT-TYPE    
  RowStatus  

eqlNASContainerCfgSourceClusterName 1.3.6.1.4.1.12740.18.1.14.1.3
This field specifies the source cluster name, which is the eqlApplianceName of the cluster hosting the source FS.
OBJECT-TYPE    
  STRING Size(1..64)  

eqlNASContainerCfgSourceFSName 1.3.6.1.4.1.12740.18.1.14.1.4
Name used to identify the source NAS Container. Contains only letters, digits and underscores. Must begin with either letter or an underscore.
OBJECT-TYPE    
  STRING Size(1..230)  

eqlNASContainerCfgModules 1.3.6.1.4.1.12740.18.1.14.1.5
Bitmap of filesystem configuration modules to be restored. Identifies which filesystem configuration modules to apply to the filesystem.
OBJECT-TYPE    
  BITS nfsExport(0), cifsShare(1), quotaRule(2), snapshotScheduler(3), volumeParameters(4), volumeName(5), volumeSize(6)  

eqlNASContainerCfgRequestId 1.3.6.1.4.1.12740.18.1.14.1.6
The NAS Container configuration request id.
OBJECT-TYPE    
  Counter64  

eqlNASFSScanTable 1.3.6.1.4.1.12740.18.1.15
EqualLogic-Dynamic This table is used to control the FS-Scan throttling on Spartan appliances.
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASFSScanEntry

eqlNASFSScanEntry 1.3.6.1.4.1.12740.18.1.15.1
The index is composed of: eqlApplianceIndex - appliance index of the cluster hosting the target FS
OBJECT-TYPE    
  EqlNASFSScanEntry  

eqlNASFSScanRate 1.3.6.1.4.1.12740.18.1.15.1.1
This field specifies the rate of FS Scan throttling to apply to a Spartan node.
OBJECT-TYPE    
  INTEGER normal(0), maintenance(1), off(2)  

eqlNASReplicationHistoryTable 1.3.6.1.4.1.12740.18.1.16
EqualLogic-Dynamic TImeoutAll:60
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASReplicationHistoryEntry

eqlNASReplicationHistoryEntry 1.3.6.1.4.1.12740.18.1.16.1
NAS Replication Historical data.
OBJECT-TYPE    
  EqlNASReplicationHistoryEntry  

eqlNASReplicationHistorySampleIndex 1.3.6.1.4.1.12740.18.1.16.1.1
Index into list of replication history data
OBJECT-TYPE    
  Unsigned32  

eqlNASReplicationHistoryStartTime 1.3.6.1.4.1.12740.18.1.16.1.2
32 bit binary start time for transfer in seconds from start of Unix epoch
OBJECT-TYPE    
  Integer32  

eqlNASReplicationHistoryEndTime 1.3.6.1.4.1.12740.18.1.16.1.3
32 bit binary end time for transfer in seconds from start of Unix epoch
OBJECT-TYPE    
  Integer32  

eqlNASReplicationHistoryTransferredMb 1.3.6.1.4.1.12740.18.1.16.1.4
Megabytes transferred
OBJECT-TYPE    
  Unsigned32  

eqlNASReplicationHistoryStatus 1.3.6.1.4.1.12740.18.1.16.1.5
transfer status
OBJECT-TYPE    
  EqlNASReplicationStatus  

eqlNASReplicationHistorySrcContainer 1.3.6.1.4.1.12740.18.1.16.1.6
Name of replication source container (alias 'file system')
OBJECT-TYPE    
  STRING Size(1..230)  

eqlNASReplicationHistoryDestContainer 1.3.6.1.4.1.12740.18.1.16.1.7
Name of replication destination container (alias 'file system')
OBJECT-TYPE    
  STRING Size(1..230)  

eqlNASApplianceAntivirusHostTable 1.3.6.1.4.1.12740.18.1.17
EqualLogic-Dynamic table used to store information of the antivirus hosts for a NAS appliance. TimeoutAll:60
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASApplianceAntivirusHostEntry

eqlNASApplianceAntivirusHostEntry 1.3.6.1.4.1.12740.18.1.17.1
An entry contains the antivirus host information for a NAS appliance.
OBJECT-TYPE    
  EqlNASApplianceAntivirusHostEntry  

eqlNASApplianceAntivirusHostIndex 1.3.6.1.4.1.12740.18.1.17.1.1
This field specifies an index that uniquely identifies the antivirus host entry.
OBJECT-TYPE    
  Unsigned32  

eqlNASApplianceAntivirusHostRowStatus 1.3.6.1.4.1.12740.18.1.17.1.2
This field is used to manage the conceptual row entry.
OBJECT-TYPE    
  RowStatus  

eqlNASApplianceAntivirusHostName 1.3.6.1.4.1.12740.18.1.17.1.3
Hostname/ip address of the antivirus host.
OBJECT-TYPE    
  STRING Size(1..256)  

eqlNASApplianceAntivirusHostPortNumber 1.3.6.1.4.1.12740.18.1.17.1.4
Port number to be used for the antivirus service on the antivirus host.
OBJECT-TYPE    
  Unsigned32 1..65535  

eqlNASApplianceAntivirusHostTransactionState 1.3.6.1.4.1.12740.18.1.17.1.5
This field denotes the transaction state of the operations on the eqlNASApplianceAntivirusHostTable.
OBJECT-TYPE    
  INTEGER configStart(0), configInProgress(1), configCommit(2), configStartCommit(3)  

eqlNASChassisTable 1.3.6.1.4.1.12740.18.1.18
EqualLogic-Dynamic NAS chassis table. TimeoutAll:60
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASChassisEntry

eqlNASChassisEntry 1.3.6.1.4.1.12740.18.1.18.1
An entry (row) containing the NAS chassis information.
OBJECT-TYPE    
  EqlNASChassisEntry  

eqlNASChassisIndex 1.3.6.1.4.1.12740.18.1.18.1.1
The NAS Chassis index.
OBJECT-TYPE    
  Unsigned32  

eqlNASChassisRowStatus 1.3.6.1.4.1.12740.18.1.18.1.2
This field is used to manage the conceptual row entry.
OBJECT-TYPE    
  RowStatus  

eqlNASChassisName 1.3.6.1.4.1.12740.18.1.18.1.3
The NAS chassis name.
OBJECT-TYPE    
  STRING Size(1..256)  

eqlNASChassisRequestId 1.3.6.1.4.1.12740.18.1.18.1.4
The NAS Chassis create operation request id.
OBJECT-TYPE    
  Counter64  

eqlNASChassisFileSystemMember 1.3.6.1.4.1.12740.18.1.18.1.5
The NAS Chassis filesystem participation state.
OBJECT-TYPE    
  TruthValue  

eqlNASChassisModelName 1.3.6.1.4.1.12740.18.1.18.1.6
The NAS chassis model name.
OBJECT-TYPE    
  STRING Size(1..32)  

eqlNASChassisStatusTable 1.3.6.1.4.1.12740.18.1.19
EqualLogic-Dynamic NAS chassis status table. TimeoutAll:60
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASChassisStatusEntry

eqlNASChassisStatusEntry 1.3.6.1.4.1.12740.18.1.19.1
An entry (row) containing the NAS chassis status.
OBJECT-TYPE    
  EqlNASChassisStatusEntry  

eqlNASChassisOverallStatus 1.3.6.1.4.1.12740.18.1.19.1.1
The overall NAS chassis status.
OBJECT-TYPE    
  EqlNASChassisComponentStatus  

eqlNASChassisChassisTag 1.3.6.1.4.1.12740.18.1.19.1.2
The NAS chassis tag.
OBJECT-TYPE    
  STRING Size(1..32)  

eqlNASChassisModel 1.3.6.1.4.1.12740.18.1.19.1.3
The NAS chassis model.
OBJECT-TYPE    
  STRING Size(1..64)  

eqlNASChassisSanType 1.3.6.1.4.1.12740.18.1.19.1.4
The NAS chassis san type.
OBJECT-TYPE    
  EqlNASChassisSanType  

eqlNASChassisOverallControllerStatus 1.3.6.1.4.1.12740.18.1.19.1.5
The NAS chassis overall controller status.
OBJECT-TYPE    
  EqlNASChassisComponentStatus  

eqlNASChassisClientNetworkSpeed 1.3.6.1.4.1.12740.18.1.19.1.6
The lowest network speed among the NAS chassis client network interfaces.
OBJECT-TYPE    
  EqlNASChassisNetworkSpeed  

eqlNASChassisBackplaneNetworkSpeed 1.3.6.1.4.1.12740.18.1.19.1.7
The lowest network speed among the NAS chassis backplane network interfaces.
OBJECT-TYPE    
  EqlNASChassisNetworkSpeed  

eqlNASChassisInternalNetworkSpeed 1.3.6.1.4.1.12740.18.1.19.1.8
The lowest network speed among the NAS chassis internal network interfaces.
OBJECT-TYPE    
  EqlNASChassisNetworkSpeed  

eqlNASChassisSanNetworkSpeed 1.3.6.1.4.1.12740.18.1.19.1.9
The lowest network speed among the NAS chassis san network interfaces.
OBJECT-TYPE    
  EqlNASChassisNetworkSpeed  

eqlNASChassisClientNetworkStatus 1.3.6.1.4.1.12740.18.1.19.1.10
The NAS chassis client network status.
OBJECT-TYPE    
  EqlNASChassisComponentStatus  

eqlNASChassisBackplaneNetworkStatus 1.3.6.1.4.1.12740.18.1.19.1.11
The NAS chassis backplane network status.
OBJECT-TYPE    
  EqlNASChassisComponentStatus  

eqlNASChassisInternalNetworkStatus 1.3.6.1.4.1.12740.18.1.19.1.12
The NAS chassis internal network status.
OBJECT-TYPE    
  EqlNASChassisComponentStatus  

eqlNASChassisSanNetworkStatus 1.3.6.1.4.1.12740.18.1.19.1.13
The NAS chassis san network status.
OBJECT-TYPE    
  EqlNASChassisComponentStatus  

eqlNASChassisOverallFanStatus 1.3.6.1.4.1.12740.18.1.19.1.14
The NAS chassis overall fan status.
OBJECT-TYPE    
  EqlNASChassisComponentStatus  

eqlNASChassisOverallPowerSupplyStatus 1.3.6.1.4.1.12740.18.1.19.1.15
The NAS chassis overall power supply status.
OBJECT-TYPE    
  EqlNASChassisACPowerStatus  

eqlNASChassisFanStatusTable 1.3.6.1.4.1.12740.18.1.19.2
EqualLogic-Dynamic NAS chassis fan status table. TimeoutAll:60
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASChassisFanStatusEntry

eqlNASChassisFanStatusEntry 1.3.6.1.4.1.12740.18.1.19.2.1
An entry (row) containing the NAS chassis fan status.
OBJECT-TYPE    
  EqlNASChassisFanStatusEntry  

eqlNASChassisFanName 1.3.6.1.4.1.12740.18.1.19.2.1.1
The NAS chassis fan name.
OBJECT-TYPE    
  STRING Size(1..64)  

eqlNASChassisFanStatus 1.3.6.1.4.1.12740.18.1.19.2.1.2
The NAS chassis fan status.
OBJECT-TYPE    
  EqlNASChassisComponentStatus  

eqlNASChassisFanRpm 1.3.6.1.4.1.12740.18.1.19.2.1.3
The NAS Chassis fan RPM.
OBJECT-TYPE    
  Unsigned32  

eqlNASChassisFanRpmRange 1.3.6.1.4.1.12740.18.1.19.2.1.4
The NAS Chassis fan RPM range.
OBJECT-TYPE    
  STRING Size(1..50)  

eqlNASChassisPowerSupplyStatusTable 1.3.6.1.4.1.12740.18.1.19.3
EqualLogic-Dynamic NAS chassis power supply status table. TimeoutAll:60
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASChassisPowerSupplyStatusEntry

eqlNASChassisPowerSupplyStatusEntry 1.3.6.1.4.1.12740.18.1.19.3.1
An entry (row) containing the NAS chassis power supply status.
OBJECT-TYPE    
  EqlNASChassisPowerSupplyStatusEntry  

eqlNASChassisPowerSupplyName 1.3.6.1.4.1.12740.18.1.19.3.1.1
The NAS chassis power supply name.
OBJECT-TYPE    
  STRING Size(1..64)  

eqlNASChassisPowerSupplyStatus 1.3.6.1.4.1.12740.18.1.19.3.1.2
The NAS chassis power supply status.
OBJECT-TYPE    
  EqlNASChassisComponentStatus  

eqlNASChassisControllerStatusTable 1.3.6.1.4.1.12740.18.1.20
EqualLogic-Dynamic NAS chassis controller status table. TimeoutAll:60
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASChassisControllerStatusEntry

eqlNASChassisControllerStatusEntry 1.3.6.1.4.1.12740.18.1.20.1
An entry (row) containing the NAS chassis controller status.
OBJECT-TYPE    
  EqlNASChassisControllerStatusEntry  

eqlNASChassisControllerIndex 1.3.6.1.4.1.12740.18.1.20.1.1
The NAS Chassis controller index.
OBJECT-TYPE    
  Unsigned32  

eqlNASChassisControllerStatus 1.3.6.1.4.1.12740.18.1.20.1.2
The NAS Chassis controller status.
OBJECT-TYPE    
  EqlNASChassisComponentStatus  

eqlNASChassisControllerState 1.3.6.1.4.1.12740.18.1.20.1.3
The NAS Chassis controller state.
OBJECT-TYPE    
  EqlNASChassisControllerState  

eqlNASChassisControllerLocation 1.3.6.1.4.1.12740.18.1.20.1.4
The NAS Chassis controller location.
OBJECT-TYPE    
  EqlNASChassisControllerLocation  

eqlNASChassisControllerAmbientTemperatureStatus 1.3.6.1.4.1.12740.18.1.20.1.5
The NAS Chassis controller ambient temperaure status.
OBJECT-TYPE    
  EqlNASChassisComponentStatus  

eqlNASChassisControllerAmbientTemperatureValue 1.3.6.1.4.1.12740.18.1.20.1.6
The NAS Chassis controller ambient temperaure value.
OBJECT-TYPE    
  Integer32  

eqlNASChassisControllerSystemControllerId 1.3.6.1.4.1.12740.18.1.20.1.7
The NAS Chassis controller system controller id.
OBJECT-TYPE    
  STRING Size(1..64)  

eqlNASChassisControllerBPSStatus 1.3.6.1.4.1.12740.18.1.20.1.8
The NAS Chassis controller BPS status.
OBJECT-TYPE    
  EqlNASChassisComponentStatus  

eqlNASChassisControllerBPSIsAccessible 1.3.6.1.4.1.12740.18.1.20.1.9
The NAS Chassis controller BPS accessibility.
OBJECT-TYPE    
  TruthValue  

eqlNASChassisControllerBPSModel 1.3.6.1.4.1.12740.18.1.20.1.10
The NAS Chassis controller BPS model.
OBJECT-TYPE    
  STRING Size(1..64)  

eqlNASChassisControllerBPSCharge 1.3.6.1.4.1.12740.18.1.20.1.11
The NAS Chassis controller BPS charge percentage.
OBJECT-TYPE    
  Unsigned32  

eqlNASChassisControllerCPUOverallStatus 1.3.6.1.4.1.12740.18.1.20.1.12
The NAS Chassis controller overall CPU status.
OBJECT-TYPE    
  EqlNASChassisComponentStatus  

eqlNASChassisControllerCPUCurrentCoresCount 1.3.6.1.4.1.12740.18.1.20.1.13
The NAS Chassis controller current CPU cores count.
OBJECT-TYPE    
  Unsigned32  

eqlNASChassisControllerOverallFanStatus 1.3.6.1.4.1.12740.18.1.20.1.14
The NAS Chassis controller overall fan status.
OBJECT-TYPE    
  EqlNASChassisComponentStatus  

eqlNASChassisControllerOverallLocalDiskStatus 1.3.6.1.4.1.12740.18.1.20.1.15
The NAS Chassis controller overall local disk status.
OBJECT-TYPE    
  EqlNASChassisComponentStatus  

eqlNASChassisControllerOverallRaidControllerStatus 1.3.6.1.4.1.12740.18.1.20.1.16
The NAS Chassis controller overall raid controller status.
OBJECT-TYPE    
  EqlNASChassisComponentStatus  

eqlNASChassisControllerOverallVirtualDiskStatus 1.3.6.1.4.1.12740.18.1.20.1.17
The NAS Chassis controller overall virtual disk status.
OBJECT-TYPE    
  EqlNASChassisComponentStatus  

eqlNASChassisControllerMemoryStatus 1.3.6.1.4.1.12740.18.1.20.1.18
The NAS Chassis controller memory status.
OBJECT-TYPE    
  EqlNASChassisComponentStatus  

eqlNASChassisControllerMemorySize 1.3.6.1.4.1.12740.18.1.20.1.19
The NAS Chassis controller total memory size.
OBJECT-TYPE    
  Unsigned32  

eqlNASChassisControllerBackplaneNetworkStatus 1.3.6.1.4.1.12740.18.1.20.1.20
The NAS Chassis controller backplane network status.
OBJECT-TYPE    
  EqlNASChassisComponentStatus  

eqlNASChassisControllerBackplaneNetworkSpeed 1.3.6.1.4.1.12740.18.1.20.1.21
The lowest network speed among the NAS chassis backplane network interfaces.
OBJECT-TYPE    
  EqlNASChassisNetworkSpeed  

eqlNASChassisControllerClientNetworkStatus 1.3.6.1.4.1.12740.18.1.20.1.22
The NAS Chassis controller client network status.
OBJECT-TYPE    
  EqlNASChassisComponentStatus  

eqlNASChassisControllerClientNetworkSpeed 1.3.6.1.4.1.12740.18.1.20.1.23
The lowest network speed among the NAS chassis client network interfaces.
OBJECT-TYPE    
  EqlNASChassisNetworkSpeed  

eqlNASChassisControllerInternalNetworkStatus 1.3.6.1.4.1.12740.18.1.20.1.24
The NAS Chassis controller internal network status.
OBJECT-TYPE    
  EqlNASChassisComponentStatus  

eqlNASChassisControllerInternalNetworkSpeed 1.3.6.1.4.1.12740.18.1.20.1.25
The lowest network speed among the NAS chassis internal network interfaces.
OBJECT-TYPE    
  EqlNASChassisNetworkSpeed  

eqlNASChassisControllerSanNetworkStatus 1.3.6.1.4.1.12740.18.1.20.1.26
The NAS Chassis controller san network status.
OBJECT-TYPE    
  EqlNASChassisComponentStatus  

eqlNASChassisControllerSanNetworkSpeed 1.3.6.1.4.1.12740.18.1.20.1.27
The lowest network speed among the NAS chassis san network interfaces.
OBJECT-TYPE    
  EqlNASChassisNetworkSpeed  

eqlNASChassisControllerOverallPowerSupplyStatus 1.3.6.1.4.1.12740.18.1.20.1.28
The NAS Chassis controller overall power supply status.
OBJECT-TYPE    
  EqlNASChassisACPowerStatus  

eqlNASChassisControllerFanStatusTable 1.3.6.1.4.1.12740.18.1.20.2
EqualLogic-Dynamic NAS chassis controller fan status table. TimeoutAll:60
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASChassisControllerFanStatusEntry

eqlNASChassisControllerFanStatusEntry 1.3.6.1.4.1.12740.18.1.20.2.1
An entry (row) containing the NAS chassis controller fan status.
OBJECT-TYPE    
  EqlNASChassisControllerFanStatusEntry  

eqlNASChassisControllerFanName 1.3.6.1.4.1.12740.18.1.20.2.1.1
The NAS chassis controller fan name.
OBJECT-TYPE    
  STRING Size(1..64)  

eqlNASChassisControllerFanStatus 1.3.6.1.4.1.12740.18.1.20.2.1.2
The NAS chassis controller fan status.
OBJECT-TYPE    
  EqlNASChassisComponentStatus  

eqlNASChassisControllerFanRpm 1.3.6.1.4.1.12740.18.1.20.2.1.3
The NAS chassis controller fan RPM.
OBJECT-TYPE    
  Unsigned32  

eqlNASChassisControllerFanRpmRange 1.3.6.1.4.1.12740.18.1.20.2.1.4
The NAS chassis controller fan RPM range.
OBJECT-TYPE    
  STRING Size(1..50)  

eqlNASChassisControllerPowerSupplyStatusTable 1.3.6.1.4.1.12740.18.1.20.3
EqualLogic-Dynamic NAS chassis controller power supply status table. TimeoutAll:60
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASChassisControllerPowerSupplyStatusEntry

eqlNASChassisControllerPowerSupplyStatusEntry 1.3.6.1.4.1.12740.18.1.20.3.1
An entry (row) containing the NAS chassis controller power supply status.
OBJECT-TYPE    
  EqlNASChassisControllerPowerSupplyStatusEntry  

eqlNASChassisControllerPowerSupplyName 1.3.6.1.4.1.12740.18.1.20.3.1.1
The NAS chassis controller power supply name.
OBJECT-TYPE    
  STRING Size(1..64)  

eqlNASChassisControllerPowerSupplyStatus 1.3.6.1.4.1.12740.18.1.20.3.1.2
The NAS chassis controller power supply status.
OBJECT-TYPE    
  EqlNASChassisComponentStatus  

eqlNASChassisControllerDiskStatusTable 1.3.6.1.4.1.12740.18.1.20.4
EqualLogic-Dynamic NAS chassis controller physical disk status table. TimeoutAll:60
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASChassisControllerDiskStatusEntry

eqlNASChassisControllerDiskStatusEntry 1.3.6.1.4.1.12740.18.1.20.4.1
An entry (row) containing the NAS chassis controller physical disk status.
OBJECT-TYPE    
  EqlNASChassisControllerDiskStatusEntry  

eqlNASChassisControllerDiskName 1.3.6.1.4.1.12740.18.1.20.4.1.1
The NAS chassis controller physical disk name.
OBJECT-TYPE    
  STRING Size(1..64)  

eqlNASChassisControllerDiskStatus 1.3.6.1.4.1.12740.18.1.20.4.1.2
The NAS chassis controller physical disk status.
OBJECT-TYPE    
  EqlNASChassisComponentStatus  

eqlNASChassisControllerNicStatusTable 1.3.6.1.4.1.12740.18.1.20.5
EqualLogic-Dynamic NAS chassis controller nic status table. TimeoutAll:60
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASChassisControllerNicStatusEntry

eqlNASChassisControllerNicStatusEntry 1.3.6.1.4.1.12740.18.1.20.5.1
An entry (row) containing the NAS chassis controller nic status.
OBJECT-TYPE    
  EqlNASChassisControllerNicStatusEntry  

eqlNASChassisControllerNicName 1.3.6.1.4.1.12740.18.1.20.5.1.1
The NAS chassis controller nic name.
OBJECT-TYPE    
  STRING Size(1..64)  

eqlNASChassisControllerNicState 1.3.6.1.4.1.12740.18.1.20.5.1.2
The NAS chassis controller nic state.
OBJECT-TYPE    
  INTEGER on(0), off(1), not-available(2)  

eqlNASChassisControllerNicSpeed 1.3.6.1.4.1.12740.18.1.20.5.1.3
The NAS chassis controller nic speed.
OBJECT-TYPE    
  EqlNASChassisNetworkSpeed  

eqlNASChassisControllerNicSlot 1.3.6.1.4.1.12740.18.1.20.5.1.4
The NAS chassis controller nic slot.
OBJECT-TYPE    
  STRING Size(1..30)  

eqlNASChassisControllerNicPort 1.3.6.1.4.1.12740.18.1.20.5.1.5
The NAS chassis controller nic port.
OBJECT-TYPE    
  Unsigned32  

eqlNASChassisControllerNicDuplex 1.3.6.1.4.1.12740.18.1.20.5.1.6
The NAS chassis controller nic duplex mode.
OBJECT-TYPE    
  INTEGER full(0), half(1), unknown(2)  

eqlNASChassisControllerNicFlowControl 1.3.6.1.4.1.12740.18.1.20.5.1.7
The NAS chassis controller nic flow control state.
OBJECT-TYPE    
  INTEGER on(0), off(1), unknown(2)  

eqlNASDiagsTable 1.3.6.1.4.1.12740.18.1.21
EqualLogic-Dynamic table controlling the NAS diags.
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASDiagsEntry

eqlNASDiagsEntry 1.3.6.1.4.1.12740.18.1.21.1
An entry (row) containing the diags information.
OBJECT-TYPE    
  EqlNASDiagsEntry  

eqlNASDiagsStart 1.3.6.1.4.1.12740.18.1.21.1.1
This field selects the diagnostic to start.
OBJECT-TYPE    
  INTEGER general(1), file(2), network(3), performance(4), clientconnectivity(5), fileaccessibility(6), protocolslog(7), logs(8)  

eqlNASDiagsCaseNumber 1.3.6.1.4.1.12740.18.1.21.1.2
This field holds the OPTIONAL Dell Support case number for the NAS diagnostics.
OBJECT-TYPE    
  STRING Size(1..10)  

eqlNASDiagsStatus 1.3.6.1.4.1.12740.18.1.21.1.3
This field holds the status of the NAS diagnostics operation.
OBJECT-TYPE    
  INTEGER idle(1), running(2)  

eqlNASClientStaticRouteTable 1.3.6.1.4.1.12740.18.1.22
EqualLogic-Dynamic table controlling the NAS client static routes. The static route entries are used to route the CLIENT traffic from the cluster members to gateways on the CLIENT network.
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASClientStaticRouteEntry

eqlNASClientStaticRouteEntry 1.3.6.1.4.1.12740.18.1.22.1
An entry (row) containing the NAS static route information for a subnet of the client network.
OBJECT-TYPE    
  EqlNASClientStaticRouteEntry  

eqlNASClientStaticRouteRowStatus 1.3.6.1.4.1.12740.18.1.22.1.1
SNMP Row Status
OBJECT-TYPE    
  RowStatus  

eqlNASClientStaticRouteNetworkAddrType 1.3.6.1.4.1.12740.18.1.22.1.2
This field specifies the type (v4/v6) for the network address of the static route.
OBJECT-TYPE    
  InetAddressType  

eqlNASClientStaticRouteNetworkAddr 1.3.6.1.4.1.12740.18.1.22.1.3
This field contains the network IP address for the static route (e.g. 200.200.200.0).
OBJECT-TYPE    
  InetAddress  

eqlNASClientStaticRouteNetworkMaskType 1.3.6.1.4.1.12740.18.1.22.1.4
This field specifies the type (v4/v6) for the network mask of the static route.The IP address of the network mask is assumed to be the same as that of the network address.
OBJECT-TYPE    
  InetAddressType  

eqlNASClientStaticRouteNetworkMask 1.3.6.1.4.1.12740.18.1.22.1.5
This field contains the network mask for the static route (e.g. 255.255.255.0).
OBJECT-TYPE    
  InetAddress  

eqlNASClientStaticRouteGatewayAddrType 1.3.6.1.4.1.12740.18.1.22.1.6
This field specifies the type (v4/v6) of the gateway IP address.
OBJECT-TYPE    
  InetAddressType  

eqlNASClientStaticRouteGatewayAddr 1.3.6.1.4.1.12740.18.1.22.1.7
This field contains the gateway IP address for the static route (e.g. 10.127.20.30).
OBJECT-TYPE    
  InetAddress  

eqlNASClusterUpdateTable 1.3.6.1.4.1.12740.18.1.23
EqualLogic-Dynamic(semi) table to update NAS Cluster Firmware. TimeoutAll:60
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASClusterUpdateEntry

eqlNASClusterUpdateEntry 1.3.6.1.4.1.12740.18.1.23.1
An entry (row) containing the NAS Cluster firmware update information.
OBJECT-TYPE    
  EqlNASClusterUpdateEntry  

eqlNASClusterUpdateRowStatus 1.3.6.1.4.1.12740.18.1.23.1.1
Rowstatus variable used to manage this conceptual row.
OBJECT-TYPE    
  RowStatus  

eqlNASClusterUpdateFilename 1.3.6.1.4.1.12740.18.1.23.1.2
This field holds the NAS Cluster firmware update script filename.
OBJECT-TYPE    
  STRING Size(1..261)  

eqlNASClusterUpdateEQLGroupMPV 1.3.6.1.4.1.12740.18.1.23.1.3
The Management Protocol Version (MPV) of the EQL Group.
OBJECT-TYPE    
  Unsigned32  

eqlNASClusterUpdateClusterMPV 1.3.6.1.4.1.12740.18.1.23.1.4
The Management Protocol Version (MPV) of the NAS Appliance Cluster.
OBJECT-TYPE    
  Unsigned32  

eqlNASClusterUpdateEQLGroupCurrentCompLevel 1.3.6.1.4.1.12740.18.1.23.1.5
This field represents the current compatibility level of the EQL group.
OBJECT-TYPE    
  Unsigned32  

eqlNASClusterUpdateRequestId 1.3.6.1.4.1.12740.18.1.23.1.6
This field represents the the NAS cluster update operation request identifier.
OBJECT-TYPE    
  Counter64  

eqlNASClusterInfoTable 1.3.6.1.4.1.12740.18.1.24
EqualLogic-Dynamic(semi) table used to get local or remote NAS cluster's id and certificate TimeoutAll:60
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASClusterInfoEntry

eqlNASClusterInfoEntry 1.3.6.1.4.1.12740.18.1.24.1
An entry contains the cluster Id and certificate
OBJECT-TYPE    
  EqlNASClusterInfoEntry  

eqlNASClusterInfoRowStatus 1.3.6.1.4.1.12740.18.1.24.1.1
This field is used indicate the status of this entry.
OBJECT-TYPE    
  RowStatus  

eqlNASClusterInfoSiteType 1.3.6.1.4.1.12740.18.1.24.1.2
This field specifies whether the Certificate request is for local or from remote replication partner site.
OBJECT-TYPE    
  INTEGER local(1), remote(2)  

eqlNASClusterInfoSegmentId 1.3.6.1.4.1.12740.18.1.24.1.3
Index into list Certificate data
OBJECT-TYPE    
  Unsigned32  

eqlNASClusterInfoSegmentSize 1.3.6.1.4.1.12740.18.1.24.1.4
Size of the Certificate data segment
OBJECT-TYPE    
  Unsigned32  

eqlNASClusterInfoMoreSegment 1.3.6.1.4.1.12740.18.1.24.1.5
True returned if there is are more segment to be feteched for the certificate
OBJECT-TYPE    
  TruthValue  

eqlNASClusterInfoCertificate 1.3.6.1.4.1.12740.18.1.24.1.6
String containing RSA certificate for local cluster.
OBJECT-TYPE    
  CertificateType  

eqlNASClusterInfoClusterId 1.3.6.1.4.1.12740.18.1.24.1.7
String containing local cluster Id. It should be unique within the network. It is generated by IDC code.
OBJECT-TYPE    
  ClusterIdType  

eqlNASReplPartnerClusterIdMapTable 1.3.6.1.4.1.12740.18.1.25
EqualLogic-Dynamic This table is used to get the NAS Cluster Id for the given remote NAS SAN VIP.
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASReplPartnerClusterIdMapEntry

eqlNASReplPartnerClusterIdMapEntry 1.3.6.1.4.1.12740.18.1.25.1
Tok_String
OBJECT-TYPE    
  EqlNASReplPartnerClusterIdMapEntry  

eqlNASReplPartnerClusterIdMapSanVIPType 1.3.6.1.4.1.12740.18.1.25.1.1
The SAN VIP type of the cluster.
OBJECT-TYPE    
  InetAddressType  

eqlNASReplPartnerClusterIdMapSanVIP 1.3.6.1.4.1.12740.18.1.25.1.2
The SAN VIP address of the cluster.
OBJECT-TYPE    
  InetAddress  

eqlNASReplPartnerClusterIdMapClusterId 1.3.6.1.4.1.12740.18.1.25.1.3
Cluster Id, a unique identifier of the cluster assingned at the time of cluster creation.
OBJECT-TYPE    
  ClusterIdType  

eqlNASReplPartnerConfigTable 1.3.6.1.4.1.12740.18.1.26
EqualLogic-Dynamic This table is used to configure NAS replication partnership (Trust) with a remote NAS cluster. TimeoutAll:60
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASReplPartnerConfigEntry

eqlNASReplPartnerConfigEntry 1.3.6.1.4.1.12740.18.1.26.1
An entry contains some of the information needed to create replication partnership with a remote NAS cluster. The combination of index and entry provides the information needed to create partnership/trust with the remote cluster.
OBJECT-TYPE    
  EqlNASReplPartnerConfigEntry  

eqlNASReplPartnerConfigRowStatus 1.3.6.1.4.1.12740.18.1.26.1.1
This field is used indicate the status of this entry.
OBJECT-TYPE    
  RowStatus  

eqlNASReplPartnerConfigCertificate 1.3.6.1.4.1.12740.18.1.26.1.2
String containing all or a portion of the certificate used in authenticating the remote cluster.
OBJECT-TYPE    
  CertificateType  

eqlNASReplPartnerConfigInetAddrType 1.3.6.1.4.1.12740.18.1.26.1.3
The address type for the RemoteCluster SAN VIP
OBJECT-TYPE    
  InetAddressType  

eqlNASReplPartnerConfigInetAddr 1.3.6.1.4.1.12740.18.1.26.1.4
The RemoteCluster SAN VIP
OBJECT-TYPE    
  InetAddress  

eqlNASReplTable 1.3.6.1.4.1.12740.18.1.27
EqualLogic-Dynamic TimeoutAll:60 This table is used to configure and monitor NAS replication relationships in FluidFS versions 3.0 and later. Prior versions used eqlNASReplicationTable for that purpose.
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASReplEntry

eqlNASReplEntry 1.3.6.1.4.1.12740.18.1.27.1
Tok_String
OBJECT-TYPE    
  EqlNASReplEntry  

eqlNASReplRowStatus 1.3.6.1.4.1.12740.18.1.27.1.1
The status of the row
OBJECT-TYPE    
  RowStatus  

eqlNASReplRemoteFSId 1.3.6.1.4.1.12740.18.1.27.1.2
Unique Identifier for the remote container. This is the FSid.
OBJECT-TYPE    
  Unsigned32  

eqlNASReplVolumeReplSiteIndex 1.3.6.1.4.1.12740.18.1.27.1.3
The value of eqliscsiVolumeReplSiteIndex to index into eqliscsiVolumeReplSiteTable.
OBJECT-TYPE    
  SiteIndex  

eqlNASReplRemoteClusterName 1.3.6.1.4.1.12740.18.1.27.1.4
This field specifies the remote cluster name, which is the eqlApplianceName of the remote cluster.
OBJECT-TYPE    
  STRING Size(1..64)  

eqlNASReplRemoteFSName 1.3.6.1.4.1.12740.18.1.27.1.5
Name used to identify the remote NAS Container. Contains only letters, digits and underscores. Must begin with either letter or an underscore.
OBJECT-TYPE    
  STRING Size(1..230)  

eqlNASReplAchievedRecoveryTime 1.3.6.1.4.1.12740.18.1.27.1.6
This field specifies the date/time of the last recovery snapshot that has been copied. Time is represented as the time in seconds since 00:00:00 UTC, 1970-01-01.
OBJECT-TYPE    
  Counter32  

eqlNASReplNextRecoveryTime 1.3.6.1.4.1.12740.18.1.27.1.7
This field specifies the date/time of the next recovery snapshot that will be copied. Time is represented as the time in seconds since 00:00:00 UTC, 1970-01-01.
OBJECT-TYPE    
  Counter32  

eqlNASReplTargetRecoveryTime 1.3.6.1.4.1.12740.18.1.27.1.8
This field specifies the date/time of the target/goal for next recovery snapshot to be copied. This is N/A to EQL. Time is represented as the time in seconds since 00:00:00 UTC, 1970-01-01.
OBJECT-TYPE    
  Counter32  

eqlNASReplTransferredPercent 1.3.6.1.4.1.12740.18.1.27.1.9
Provides a percent transferred for the current replication process.
OBJECT-TYPE    
  Unsigned32  

eqlNASReplTransferredMB 1.3.6.1.4.1.12740.18.1.27.1.10
Provides data transferred (in MB) for the current replication process.
OBJECT-TYPE    
  Unsigned32  

eqlNASReplStatus 1.3.6.1.4.1.12740.18.1.27.1.11
The status of this replication relationship.
OBJECT-TYPE    
  EqlNASReplicationStatus  

eqlNASReplAction 1.3.6.1.4.1.12740.18.1.27.1.12
Use this column to perform actions on this replication relationship.
OBJECT-TYPE    
  INTEGER none(0), replicate(1), pause(2), resume(3), cancel(4), demote(5), promote(6), force-promote(7), delete(8), force-delete(9), outbound-delete(100), outbound-force-delete(101), inbound-delete(102), inbound-promote(103), inbound-promote-restore-cfg(104), inbound-promote-keep-demote(105), inbound-promote-keep-demote-restore-cfg(106), inbound-delete-failback(107), inbound-delete-failback-restore-cfg(108), restore-cfg(109), inbound-pause(110), inbound-resume(111), internal-promote(112)  

eqlNASReplSecsToComplete 1.3.6.1.4.1.12740.18.1.27.1.13
Seconds left in completion of the current replication process.
OBJECT-TYPE    
  Unsigned32  

eqlNASReplError 1.3.6.1.4.1.12740.18.1.27.1.14
Error encountered during replication.
OBJECT-TYPE    
  EqlNASReplicationError  

eqlNASReplRole 1.3.6.1.4.1.12740.18.1.27.1.15
The role(src/dest) of this container in the relication relationship.
OBJECT-TYPE    
  EqlNASReplicationRole  

eqlNASReplCurrentXferRateKbps 1.3.6.1.4.1.12740.18.1.27.1.16
The current rate of data transfer(kbps) for the replication under progress.
OBJECT-TYPE    
  Unsigned32  

eqlNASQuotaUsageTable 1.3.6.1.4.1.12740.18.1.3.7
EqualLogic-Dynamic quota Table This table contains a list of quota usages associated with the associated container. TimeoutAll:60
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASQuotaUsageEntry

eqlNASQuotaUsageEntry 1.3.6.1.4.1.12740.18.1.3.7.1
An entry (row) containing quota info.
OBJECT-TYPE    
  EqlNASQuotaUsageEntry  

eqlNASQuotaUsageRowStatus 1.3.6.1.4.1.12740.18.1.3.7.1.1
The rowstatus....
OBJECT-TYPE    
  RowStatus  

eqlNASQuotaUsageTargetType 1.3.6.1.4.1.12740.18.1.3.7.1.2
Type of target for this quota definition row
OBJECT-TYPE    
  INTEGER unused(0), allofgroup(1), anyuseringroup(2), user(3)  

eqlNASQuotaUsageTargetName 1.3.6.1.4.1.12740.18.1.3.7.1.3
The name of the user or group as indicated by the target type. AD groups can be 129 bytes
OBJECT-TYPE    
  STRING Size(1..129)  

eqlNASQuotaUsageMB 1.3.6.1.4.1.12740.18.1.3.7.1.4
This field specifies the amount of space in MB currently in use by targetname.
OBJECT-TYPE    
  Integer32  

eqlNASGroupQuotaEffectiveRuleTable 1.3.6.1.4.1.12740.18.1.3.8
EqualLogic-Dynamic quota Table This table contains a list of group quota effective rules associated with the associated container. TimeoutAll:60
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASGroupQuotaEffectiveRuleEntry

eqlNASGroupQuotaEffectiveRuleEntry 1.3.6.1.4.1.12740.18.1.3.8.1
An entry (row) containing quota info.
OBJECT-TYPE    
  EqlNASGroupQuotaEffectiveRuleEntry  

eqlNASGroupQuotaEffectiveRuleTargetName 1.3.6.1.4.1.12740.18.1.3.8.1.1
The name of the group. AD groups can be 129 bytes
OBJECT-TYPE    
  STRING Size(1..129)  

eqlNASGroupQuotaEffectiveRuleRowStatus 1.3.6.1.4.1.12740.18.1.3.8.1.2
The rowstatus....
OBJECT-TYPE    
  RowStatus  

eqlNASGroupQuotaEffectiveRuleSoftLimit 1.3.6.1.4.1.12740.18.1.3.8.1.3
This is the amount of used space that triggers user alerts
OBJECT-TYPE    
  Integer32  

eqlNASGroupQuotaEffectiveRuleHardLimit 1.3.6.1.4.1.12740.18.1.3.8.1.4
This field specifies the amount of space in MB at which writes are disallowed.
OBJECT-TYPE    
  Integer32  

eqlNASGroupQuotaEffectiveRuleSoftLimitEnabled 1.3.6.1.4.1.12740.18.1.3.8.1.5
Specifies whether alerts based on softlimit are enabled.
OBJECT-TYPE    
  TruthValue  

eqlNASGroupQuotaEffectiveRuleHardLimitEnabled 1.3.6.1.4.1.12740.18.1.3.8.1.6
This field specifies whether hard limit is enforced
OBJECT-TYPE    
  TruthValue  

eqlNASUserQuotaEffectiveRuleTable 1.3.6.1.4.1.12740.18.1.3.9
EqualLogic-Dynamic quota Table This table contains a list of user quota effective rules associated with the associated container. TimeoutAll:60
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASUserQuotaEffectiveRuleEntry

eqlNASUserQuotaEffectiveRuleEntry 1.3.6.1.4.1.12740.18.1.3.9.1
An entry (row) containing quota info.
OBJECT-TYPE    
  EqlNASUserQuotaEffectiveRuleEntry  

eqlNASUserQuotaEffectiveRuleTargetName 1.3.6.1.4.1.12740.18.1.3.9.1.1
The name of the user.
OBJECT-TYPE    
  STRING Size(1..129)  

eqlNASUserQuotaEffectiveRuleRowStatus 1.3.6.1.4.1.12740.18.1.3.9.1.2
The rowstatus....
OBJECT-TYPE    
  RowStatus  

eqlNASUserQuotaEffectiveRuleUserSoftLimit 1.3.6.1.4.1.12740.18.1.3.9.1.3
This is the amount of used space that triggers user alerts
OBJECT-TYPE    
  Integer32  

eqlNASUserQuotaEffectiveRuleUserHardLimit 1.3.6.1.4.1.12740.18.1.3.9.1.4
This field specifies the amount of space in MB at which writes are disallowed.
OBJECT-TYPE    
  Integer32  

eqlNASUserQuotaEffectiveRuleGroupName 1.3.6.1.4.1.12740.18.1.3.9.1.5
The name of the primary group of the user
OBJECT-TYPE    
  STRING Size(1..129)  

eqlNASUserQuotaEffectiveRuleGroupSoftLimit 1.3.6.1.4.1.12740.18.1.3.9.1.6
This is the amount of used space that triggers user alerts based on primary group's warn level
OBJECT-TYPE    
  Integer32  

eqlNASUserQuotaEffectiveRuleGroupHardLimit 1.3.6.1.4.1.12740.18.1.3.9.1.7
This field specifies the amount of space in MB at which writes are disallowed based on primary group's hard limit.
OBJECT-TYPE    
  Integer32  

eqlNASUserQuotaEffectiveRuleUserSoftLimitEnabled 1.3.6.1.4.1.12740.18.1.3.9.1.8
Specifies whether alerts based on user softlimit are enabled.
OBJECT-TYPE    
  TruthValue  

eqlNASUserQuotaEffectiveRuleUserHardLimitEnabled 1.3.6.1.4.1.12740.18.1.3.9.1.9
This field specifies whether user hard limit is enforced
OBJECT-TYPE    
  TruthValue  

eqlNASUserQuotaEffectiveRuleGroupSoftLimitEnabled 1.3.6.1.4.1.12740.18.1.3.9.1.10
Specifies whether alerts based on primary group's softlimit are enabled.
OBJECT-TYPE    
  TruthValue  

eqlNASUserQuotaEffectiveRuleGroupHardLimitEnabled 1.3.6.1.4.1.12740.18.1.3.9.1.11
This field specifies whether primary group's hard limit is enforced
OBJECT-TYPE    
  TruthValue  

eqlNASConfigStateTable 1.3.6.1.4.1.12740.18.1.28
EqualLogic-Dynamic table controlling the NAS cluster configuration state.
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASConfigStateEntry

eqlNASConfigStateEntry 1.3.6.1.4.1.12740.18.1.28.1
An entry (row) containing the NAS Cluster configuration state information.
OBJECT-TYPE    
  EqlNASConfigStateEntry  

eqlNASConfigStateConfigFinished 1.3.6.1.4.1.12740.18.1.28.1.1
True if NAS Cluster configuration is completed.
OBJECT-TYPE    
  TruthValue  

eqlNASConfigStateHardwareReplaceInProgress 1.3.6.1.4.1.12740.18.1.28.1.2
True if NAS Cluster hardware replacement is in progress.
OBJECT-TYPE    
  TruthValue  

eqlNASClientTable 1.3.6.1.4.1.12740.18.1.29
EqualLogic-Dynamic This table contains NAS Client information. TimeoutAll:60
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASClientEntry

eqlNASClientEntry 1.3.6.1.4.1.12740.18.1.29.1
An entry (row) containing NAS client information.
OBJECT-TYPE    
  EqlNASClientEntry  

eqlNASClientNodeIndex 1.3.6.1.4.1.12740.18.1.29.1.1
NAS client node index.
OBJECT-TYPE    
  Unsigned32  

eqlNASClientIPAddressType 1.3.6.1.4.1.12740.18.1.29.1.2
This field specifies the type of address (v4/v6) of this IP address entry.
OBJECT-TYPE    
  InetAddressType  

eqlNASClientIPAddress 1.3.6.1.4.1.12740.18.1.29.1.3
NAS client IPv4 address.
OBJECT-TYPE    
  InetAddress  

eqlNASClientUserName 1.3.6.1.4.1.12740.18.1.29.1.4
NAS client user name.
OBJECT-TYPE    
  STRING Size(1..85)  

eqlNASClientProtocol 1.3.6.1.4.1.12740.18.1.29.1.5
NAS client protocol.
OBJECT-TYPE    
  INTEGER cifs(1)  

eqlNASClientConnectedTime 1.3.6.1.4.1.12740.18.1.29.1.6
The time in seconds that has elapsed since this client connection was first established with the NAS controller.
OBJECT-TYPE    
  Counter32  

eqlNASClientIdleTime 1.3.6.1.4.1.12740.18.1.29.1.7
The time in seconds that has elapsed since this client connection is idle.
OBJECT-TYPE    
  Counter32  

eqlNASClientNumOpenFiles 1.3.6.1.4.1.12740.18.1.29.1.8
The number of open files from this client connection.
OBJECT-TYPE    
  Unsigned32  

eqlNASClientIsGuest 1.3.6.1.4.1.12740.18.1.29.1.9
True if the client initiating this connection is a guest.
OBJECT-TYPE    
  TruthValue  

eqlNASStatsClusterTrafficRateTable 1.3.6.1.4.1.12740.18.1.30
EqualLogic-Dynamic This table contains NAS traffic rate statistics for the NAS cluster. TimeoutAll:60
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASStatsClusterTrafficRateEntry

eqlNASStatsClusterTrafficRateEntry 1.3.6.1.4.1.12740.18.1.30.1
An entry (row) containing peristent NAS cluster traffic rate statistics.
OBJECT-TYPE    
  EqlNASStatsClusterTrafficRateEntry  

eqlNASStatsClusterTrafficRateTimestamp 1.3.6.1.4.1.12740.18.1.30.1.1
This field specifies the date/time when the statistics were collected. Time is represented as the time in seconds since 00:00:00 UTC, 1970-01-01.
OBJECT-TYPE    
  Counter32  

eqlNASStatsClusterTrafficRateNfsReadMBsPerSec 1.3.6.1.4.1.12740.18.1.30.1.2
The number of MBs read per second via NFS per cluster.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsClusterTrafficRateNfsWriteMBsPerSec 1.3.6.1.4.1.12740.18.1.30.1.3
The number of MBs written per second via NFS per cluster.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsClusterTrafficRateNdmpReadMBsPerSec 1.3.6.1.4.1.12740.18.1.30.1.4
The number of MBs read per second via NDMP per cluster.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsClusterTrafficRateNdmpWriteMBsPerSec 1.3.6.1.4.1.12740.18.1.30.1.5
The number of MBs written per second via NDMP per cluster.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsClusterTrafficRateCifsReadMBsPerSec 1.3.6.1.4.1.12740.18.1.30.1.6
The number of MBs read per second via CIFS per cluster.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsClusterTrafficRateCifsWriteMBsPerSec 1.3.6.1.4.1.12740.18.1.30.1.7
The number of MBs written per second via CIFS per second per cluster.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsClusterTrafficRateReplicationReadMBsPerSec 1.3.6.1.4.1.12740.18.1.30.1.8
The number of replication MBs read per second per cluster.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsClusterTrafficRateReplicationWriteMBsPerSec 1.3.6.1.4.1.12740.18.1.30.1.9
The number of replication MBs written per second per cluster.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsClusterTrafficRateStorageSubSystemReadMBsPerSec 1.3.6.1.4.1.12740.18.1.30.1.10
The number of storage subsystem MBs read per second per cluster.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsClusterTrafficRateStorageSubSystemWriteMBsPerSec 1.3.6.1.4.1.12740.18.1.30.1.11
The number of storage subsystem MBs written per second per cluster.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsClusterTrafficRateNetworkOverheadReadMBsPerSec 1.3.6.1.4.1.12740.18.1.30.1.12
The number of network overhead MBs read per second per cluster.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsClusterTrafficRateNetworkOverheadWriteMBsPerSec 1.3.6.1.4.1.12740.18.1.30.1.13
The number of network overhead MBs written per second per cluster.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsClusterTrafficRateNetworkPacketDropsPerSec 1.3.6.1.4.1.12740.18.1.30.1.14
The number of network packet drops per second per cluster.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsClusterTrafficRateNfsIOPSRead 1.3.6.1.4.1.12740.18.1.30.1.15
The number of NFS IO read operations per second per cluster.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsClusterTrafficRateNfsIOPSWrite 1.3.6.1.4.1.12740.18.1.30.1.16
The number of NFS IO write operations per second per cluster.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsClusterTrafficRateNfsIOPSOther 1.3.6.1.4.1.12740.18.1.30.1.17
The number of NFS IO other operations per second per cluster.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsClusterTrafficRateCifsIOPSRead 1.3.6.1.4.1.12740.18.1.30.1.18
The number of CIFS IO read operations per second per cluster.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsClusterTrafficRateCifsIOPSWrite 1.3.6.1.4.1.12740.18.1.30.1.19
The number of CIFS IO write operations per second per cluster.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsClusterTrafficRateCifsIOPSOther 1.3.6.1.4.1.12740.18.1.30.1.20
The number of CIFS IO other operations per second per cluster.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsClusterTrafficRateTotalPrimaryMBsPerSec 1.3.6.1.4.1.12740.18.1.30.1.21
The total number of primary MBs per second per cluster.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsClusterTrafficRateTotalSecondaryMBsPerSec 1.3.6.1.4.1.12740.18.1.30.1.22
The total number of secondary MBs per second per cluster.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsControllerTrafficRateTable 1.3.6.1.4.1.12740.18.1.31
EqualLogic-Dynamic This table contains NAS traffic rate statistics for the NAS controller. TimeoutAll:60
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASStatsControllerTrafficRateEntry

eqlNASStatsControllerTrafficRateEntry 1.3.6.1.4.1.12740.18.1.31.1
An entry (row) containing NAS controller traffic rate statistics.
OBJECT-TYPE    
  EqlNASStatsControllerTrafficRateEntry  

eqlNASStatsControllerTrafficRateIndex 1.3.6.1.4.1.12740.18.1.31.1.1
NAS controller index.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsControllerTrafficRateTimestamp 1.3.6.1.4.1.12740.18.1.31.1.2
This field specifies the date/time when the statistics were collected. Time is represented as the time in seconds since 00:00:00 UTC, 1970-01-01.
OBJECT-TYPE    
  Counter32  

eqlNASStatsControllerTrafficRateNfsReadMBsPerSec 1.3.6.1.4.1.12740.18.1.31.1.3
The number of MBs read per second via NFS per controller.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsControllerTrafficRateNfsWriteMBsPerSec 1.3.6.1.4.1.12740.18.1.31.1.4
The number of MBs written per second via NFS per controller.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsControllerTrafficRateNdmpReadMBsPerSec 1.3.6.1.4.1.12740.18.1.31.1.5
The number of MBs read per second via NDMP per controller.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsControllerTrafficRateNdmpWriteMBsPerSec 1.3.6.1.4.1.12740.18.1.31.1.6
The number of MBs written per second via NDMP per controller.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsControllerTrafficRateCifsReadMBsPerSec 1.3.6.1.4.1.12740.18.1.31.1.7
The number of MBs read per second via CIFS per controller.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsControllerTrafficRateCifsWriteMBsPerSec 1.3.6.1.4.1.12740.18.1.31.1.8
The number of MBs written per second via CIFS per controller
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsControllerTrafficRateReplicationReadMBsPerSec 1.3.6.1.4.1.12740.18.1.31.1.9
The number of replication MBs read per second per controller.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsControllerTrafficRateReplicationWriteMBsPerSec 1.3.6.1.4.1.12740.18.1.31.1.10
The number of replication MBs written per second per controller.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsControllerTrafficRateStorageSubSystemReadMBsPerSec 1.3.6.1.4.1.12740.18.1.31.1.11
The number of storage subsytem MBs read per second per controller.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsControllerTrafficRateStorageSubSystemWriteMBsPerSec 1.3.6.1.4.1.12740.18.1.31.1.12
The number of storage subsystem MBs written per second per controller.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsControllerTrafficRateNetworkOverheadReadMBsPerSec 1.3.6.1.4.1.12740.18.1.31.1.13
The number of network overhead MBs per second per controller.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsControllerTrafficRateNetworkOverheadWriteMBsPerSec 1.3.6.1.4.1.12740.18.1.31.1.14
The number of network overhead MBs per second per controller.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsControllerTrafficRateNetworkPacketDropsPerSec 1.3.6.1.4.1.12740.18.1.31.1.15
The number of network packet drops per second per controller.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsControllerTrafficRateNfsIOPSRead 1.3.6.1.4.1.12740.18.1.31.1.16
The number of NFS IO read operations per second per controller.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsControllerTrafficRateNfsIOPSWrite 1.3.6.1.4.1.12740.18.1.31.1.17
The number of NFS IO write operations per second per controller.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsControllerTrafficRateNfsIOPSOther 1.3.6.1.4.1.12740.18.1.31.1.18
The number of NFS IO other operations per second per controller.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsControllerTrafficRateCifsIOPSRead 1.3.6.1.4.1.12740.18.1.31.1.19
The number of CIFS IO read operations per second per controller.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsControllerTrafficRateCifsIOPSWrite 1.3.6.1.4.1.12740.18.1.31.1.20
The number of CIFS IO write operations per second per controller.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsControllerTrafficRateCifsIOPSOther 1.3.6.1.4.1.12740.18.1.31.1.21
The number of CIFS IO other operations per second per controller.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsControllerTrafficRateTotalPrimaryMBsPerSec 1.3.6.1.4.1.12740.18.1.31.1.22
The total primary MBs per second per controller.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsControllerTrafficRateTotalPrimaryMBsPerSecToAverage 1.3.6.1.4.1.12740.18.1.31.1.23
The total primary MBs per second average per controller.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsControllerTrafficRateTotalSecondaryMBsPerSec 1.3.6.1.4.1.12740.18.1.31.1.24
The total secondary MBs per second per controller.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsControllerLoadBalancingTable 1.3.6.1.4.1.12740.18.1.31.2
EqualLogic-Dynamic NAS controller load balancing statistics table. TimeoutAll:60
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASStatsControllerLoadBalancingEntry

eqlNASStatsControllerLoadBalancingEntry 1.3.6.1.4.1.12740.18.1.31.2.1
An entry (row) containing controller load balancing statistics.
OBJECT-TYPE    
  EqlNASStatsControllerLoadBalancingEntry  

eqlNASStatsControllerLoadBalancingIndex 1.3.6.1.4.1.12740.18.1.31.2.1.1
NAS controller index.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsControllerLoadBalancingTimestamp 1.3.6.1.4.1.12740.18.1.31.2.1.2
This field specifies the date/time when the statistics were collected. Time is represented as the time in seconds since 00:00:00 UTC, 1970-01-01.
OBJECT-TYPE    
  Counter32  

eqlNASStatsControllerCPULoadPercent 1.3.6.1.4.1.12740.18.1.31.2.1.3
The percentage of time the CPU is executing instructions.
OBJECT-TYPE    
  Unsigned32  

eqlNASStatsControllerTotalCifsConnections 1.3.6.1.4.1.12740.18.1.31.2.1.4
The total number of CIFS connections terminated on the controller.
OBJECT-TYPE    
  Unsigned32  

eqlNASCacheInfoTable 1.3.6.1.4.1.12740.18.1.40
EqualLogic-Dynamic This table contains NAS Cache information. TimeoutAll:60
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASCacheInfoEntry

eqlNASCacheInfoEntry 1.3.6.1.4.1.12740.18.1.40.1
An entry (row) containing NAS cache information.
OBJECT-TYPE    
  EqlNASCacheInfoEntry  

eqlNASCacheInfoIndex 1.3.6.1.4.1.12740.18.1.40.1.1
Cache index of the cached index.
OBJECT-TYPE    
  Unsigned32  

eqlNASCacheInfoCacheObjectName 1.3.6.1.4.1.12740.18.1.40.1.2
Name of the cached object.
OBJECT-TYPE    
  STRING Size(1..64)  

eqlNASCacheInfoCacheObjectExpiryTime 1.3.6.1.4.1.12740.18.1.40.1.3
Cache refresh time in seconds. A value of 0 means this is a persistent cache.
OBJECT-TYPE    
  Unsigned32  

eqlNASCacheInfoCacheObjectState 1.3.6.1.4.1.12740.18.1.40.1.4
Current cached object state.
OBJECT-TYPE    
  STRING Size(1..64)  

eqlNASCacheInfoAction 1.3.6.1.4.1.12740.18.1.40.1.5
Action on this NAS cache.
OBJECT-TYPE    
  INTEGER none(0), refresh-all(1), refresh(2), restart-agent(3)  

eqlNASReplHistoryTable 1.3.6.1.4.1.12740.18.1.41
EqualLogic-Dynamic table used to hold NAS replication history data. Used with FluidFS version 3.0 and later versions. For FluidFS version 2.0 the table eqlNASReplicationHistory is used instead.
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASReplHistoryEntry

eqlNASReplHistoryEntry 1.3.6.1.4.1.12740.18.1.41.1
An entry (row) containing the NAS Replication history information.
OBJECT-TYPE    
  EqlNASReplHistoryEntry  

eqlNASReplHistoryUniqueId 1.3.6.1.4.1.12740.18.1.41.1.1
Unique ID assigned by Fluid FS 3.0 software
OBJECT-TYPE    
  Unsigned32  

eqlNASReplHistoryEventTime 1.3.6.1.4.1.12740.18.1.41.1.2
Time when event was recorded by the FluidFS. Often the same as the end time.
OBJECT-TYPE    
  Integer32  

eqlNASReplHistorySourceContainerName 1.3.6.1.4.1.12740.18.1.41.1.3
Name of source NAS container being replicated.
OBJECT-TYPE    
  NASContainerNameType  

eqlNASReplHistorySourceClusterName 1.3.6.1.4.1.12740.18.1.41.1.4
Name of source cluster where source container exists. This is not currenlty required so if memory is limited, this could be deleted from the MIB.
OBJECT-TYPE    
  ClusterNameType  

eqlNASReplHistoryDestContainerName 1.3.6.1.4.1.12740.18.1.41.1.5
Name of destination NAS container receiving replication data
OBJECT-TYPE    
  NASContainerNameType  

eqlNASReplHistoryDestClusterName 1.3.6.1.4.1.12740.18.1.41.1.6
Name of destination cluster where destionation container exists
OBJECT-TYPE    
  ClusterNameType  

eqlNASReplHistoryStartTime 1.3.6.1.4.1.12740.18.1.41.1.7
Start time for replication
OBJECT-TYPE    
  Integer32  

eqlNASReplHistoryEndTime 1.3.6.1.4.1.12740.18.1.41.1.8
End time for replication
OBJECT-TYPE    
  Integer32  

eqlNASReplHistoryTransferredMb 1.3.6.1.4.1.12740.18.1.41.1.9
Number of megabytes transferred.
OBJECT-TYPE    
  Counter32  

eqlNASReplHistoryStatus 1.3.6.1.4.1.12740.18.1.41.1.10
The status of this replication relationship. Mainly use value 'finished' or 'failed'.
OBJECT-TYPE    
  EqlNASReplicationStatus  

eqlNASTaskTable 1.3.6.1.4.1.12740.18.1.42
EqualLogic-Persistent task table. A row in this table represents a task currently executing in the NAS.
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASTaskEntry

eqlNASTaskEntry 1.3.6.1.4.1.12740.18.1.42.1
A row in the table represents a task. Any given task will have multiple sub tasks. Each sub task involves executing a management operation. The system will execute each sub task one after another until the task is completed.
OBJECT-TYPE    
  EqlNASTaskEntry  

eqlNASTaskIndex 1.3.6.1.4.1.12740.18.1.42.1.1
This field specifies an index that uniquely identifies a task.
OBJECT-TYPE    
  Unsigned32  

eqlNASTaskRowStatus 1.3.6.1.4.1.12740.18.1.42.1.2
This field is used to manage the conceptual row.
OBJECT-TYPE    
  RowStatus  

eqlNASTaskType 1.3.6.1.4.1.12740.18.1.42.1.3
This field represents the type of the task.
OBJECT-TYPE    
  INTEGER resync(1), failback(2)  

eqlNASTaskContext 1.3.6.1.4.1.12740.18.1.42.1.4
A generic task context
OBJECT-TYPE    
  STRING Size(1..256)  

eqlNASTaskNumSubTasks 1.3.6.1.4.1.12740.18.1.42.1.5
Number of subtasks in this task.
OBJECT-TYPE    
  Unsigned32  

eqlNASTaskSubTaskInProgress 1.3.6.1.4.1.12740.18.1.42.1.6
Subtask that is currently in progress for this task.
OBJECT-TYPE    
  INTEGER none(0), resync-primaryContainerPromote(100), resync-primaryContainerReplicationDelete(110), resync-recoveryContainerReplicationConfigure(120), resync-recoveryContainerReplicate(130), resync-recoveryContainerSourcePromote(140), resync-recoveryContainerReplicationDelete(150), resync-primaryContainerReplicationConfigure(160), resync-recoveryContainerPromote(170), failback-primaryContainerPromote(300), failback-primaryContainerReplicationDelete(310), failback-recoveryContainerReplicationConfigure(320), failback-recoveryContainerDisableSchedules(330), failback-recoveryContainerReplicate(340), failback-recoveryContainerFinalReplication(350), failback-recoveryContainerPromote(360), failback-recoveryContainerReplicationDelete(370), failback-primaryContainerReplicationConfigure(380), complete(10000)  

eqlNASTaskSubtaskStatus 1.3.6.1.4.1.12740.18.1.42.1.7
Status of currently executing subtask.
OBJECT-TYPE    
  Unsigned32  

eqlNASTaskStatus 1.3.6.1.4.1.12740.18.1.42.1.8
set to true if user action is required for the task to proceed further.
OBJECT-TYPE    
  INTEGER user-action-required(1), in-progress(2), complete(3)  

eqlNASTaskUserAction 1.3.6.1.4.1.12740.18.1.42.1.9
user action on the task.
OBJECT-TYPE    
  INTEGER retry(1)  

eqlNASTaskStartTime 1.3.6.1.4.1.12740.18.1.42.1.10
time at which this task started represented as number of seconds since epoch.
OBJECT-TYPE    
  Counter32  

eqlNASTaskContainerReplInfoTable 1.3.6.1.4.1.12740.18.1.43
EqualLogic-Persistent TimeoutAll:60 This table is used to track the replication relationship on the NAS Container which has a NAS task
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASTaskContainerReplInfoEntry

eqlNASTaskContainerReplInfoEntry 1.3.6.1.4.1.12740.18.1.43.1
Tok_String
OBJECT-TYPE    
  EqlNASTaskContainerReplInfoEntry  

eqlNASTaskContainerReplInfoRowStatus 1.3.6.1.4.1.12740.18.1.43.1.1
The status of the row
OBJECT-TYPE    
  RowStatus  

eqlNASTaskContainerReplInfoRemoteFSId 1.3.6.1.4.1.12740.18.1.43.1.2
Unique Identifier for the remote container. This is the FSid.
OBJECT-TYPE    
  Unsigned32  

eqlNASTaskContainerReplInfoVolumeReplSiteIndex 1.3.6.1.4.1.12740.18.1.43.1.3
The value of eqliscsiVolumeReplSiteIndex to index into eqliscsiVolumeReplSiteTable.
OBJECT-TYPE    
  SiteIndex  

eqlNASTaskContainerReplInfoRemoteClusterName 1.3.6.1.4.1.12740.18.1.43.1.4
This field specifies the remote cluster name, which is the eqlApplianceName of the remote cluster.
OBJECT-TYPE    
  STRING Size(1..64)  

eqlNASTaskContainerReplInfoLocalFSName 1.3.6.1.4.1.12740.18.1.43.1.5
Name used to identify the local NAS Container. Contains only letters, digits and underscores. Must begin with either letter or an underscore.
OBJECT-TYPE    
  STRING Size(1..230)  

eqlNASTaskContainerReplInfoRemoteFSName 1.3.6.1.4.1.12740.18.1.43.1.6
Name used to identify the remote NAS Container. Contains only letters, digits and underscores. Must begin with either letter or an underscore.
OBJECT-TYPE    
  STRING Size(1..230)  

eqlNASTaskContainerReplInfoLocalClusterId 1.3.6.1.4.1.12740.18.1.43.1.7
Local Cluster Id.
OBJECT-TYPE    
  ClusterIdType  

eqlNASTaskContainerReplInfoTaskId 1.3.6.1.4.1.12740.18.1.43.1.8
This field specifies an Id that uniquely identifies a task.
OBJECT-TYPE    
  Unsigned32  

eqlNASLostContainerTable 1.3.6.1.4.1.12740.18.1.44
EqualLogic-Dynamic Appliance Table. This table contains a list of NAS Appliance configurations for containers lost during a configuration restore. TimeoutAll:60
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASLostContainerEntry

eqlNASLostContainerEntry 1.3.6.1.4.1.12740.18.1.44.1
An entry (row) containing NAS Lost Container info.
OBJECT-TYPE    
  EqlNASLostContainerEntry  

eqlNASLostContainerRowStatus 1.3.6.1.4.1.12740.18.1.44.1.1
Row status variable used to manage this row.
OBJECT-TYPE    
  RowStatus  

eqlNASLostContainerName 1.3.6.1.4.1.12740.18.1.44.1.2
Name used to identify NAS Container. Contains only letters, digits and underscores. Must begin with either letter or an underscore.
OBJECT-TYPE    
  STRING Size(1..230)  

eqlNASLostContainerCapacity 1.3.6.1.4.1.12740.18.1.44.1.3
Size of NAS Container in MB.
OBJECT-TYPE    
  Unsigned32  

eqlNASLostContainerUsedSpaceAlert 1.3.6.1.4.1.12740.18.1.44.1.4
Alert user when NAS container used space reaches certain % value of NAS container size.Default value is choosen from eqlNASApplianceConfigUsedSpaceAlert
OBJECT-TYPE    
  Unsigned32  

eqlNASLostContainerSnapshotUsedSpaceAlert 1.3.6.1.4.1.12740.18.1.44.1.5
Alert user when NAS container snapshot used space reaches certain % value of NAS container snapshot size.Default value is choosen from eqlNASApplianceConfigSnapSpaceAlert
OBJECT-TYPE    
  Unsigned32  

eqlNASSanStaticRouteTable 1.3.6.1.4.1.12740.18.1.45
EqualLogic-Dynamic This table is used to manage static route entries on NAS cluster. The static route entries are used to route SAN traffic from cluster members to gateways on the SAN network. TimeoutAll:60
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNASSanStaticRouteEntry

eqlNASSanStaticRouteEntry 1.3.6.1.4.1.12740.18.1.45.1
Tok_String
OBJECT-TYPE    
  EqlNASSanStaticRouteEntry  

eqlNASSanStaticRouteRowStatus 1.3.6.1.4.1.12740.18.1.45.1.1
The status of the row
OBJECT-TYPE    
  RowStatus  

eqlNASSanStaticRouteNetworkAddrType 1.3.6.1.4.1.12740.18.1.45.1.2
This field specifies the type of address (v4/v6) for the Network address of the static route.
OBJECT-TYPE    
  InetAddressType  

eqlNASSanStaticRouteNetworkAddr 1.3.6.1.4.1.12740.18.1.45.1.3
This field contains the Network IP address for the static route (e.g., 200.200.200.0)
OBJECT-TYPE    
  InetAddress  

eqlNASSanStaticRouteNetworkMaskType 1.3.6.1.4.1.12740.18.1.45.1.4
This field specifies the type (v4/v6) for the Network mask of the static route.
OBJECT-TYPE    
  InetAddressType  

eqlNASSanStaticRouteNetworkMask 1.3.6.1.4.1.12740.18.1.45.1.5
This field contains the Network mask for the static route (e.g., 255.255.255.0). The IP address type of the mask is assumed to be the same as that of the network address
OBJECT-TYPE    
  InetAddress  

eqlNASSanStaticRouteGatewayAddrType 1.3.6.1.4.1.12740.18.1.45.1.6
This field specifies the type of address (v4/v6) of the gateway IP address.
OBJECT-TYPE    
  InetAddressType  

eqlNASSanStaticRouteGatewayAddr 1.3.6.1.4.1.12740.18.1.45.1.7
This field contains the gateway IP address for the static route (e.g., 10.127.20.30)
OBJECT-TYPE    
  InetAddress