ELTEX-MES-eltInterfaces

File: ELTEX-MES-eltInterfaces.mib (6387 bytes)

Imported modules

ELTEX-MES	IF-MIB	Q-BRIDGE-MIB
SNMPv2-SMI	RFC1155-SMI	SNMPv2-TC

Imported symbols

eltMesSwInterfaces	ifIndex	InterfaceIndex
InterfaceIndexOrZero	PortList	Unsigned32
Integer32	Counter32	MODULE-IDENTITY
OBJECT-TYPE	Counter	RowStatus

Defined Types

EltSwIfEntry
SEQUENCE
	eltSwIfIndex	INTEGER
	eltSwIfSfpOperationMode	INTEGER

EltSwIfUtilizationEntry
SEQUENCE
	eltSwIfUtilizationIfIndex	INTEGER
	eltSwIfUtilizationAverageTime	INTEGER
	eltSwIfUtilizationCurrentInPkts	Counter
	eltSwIfUtilizationCurrentInRate	Counter
	eltSwIfUtilizationCurrentOutPkts	Counter
	eltSwIfUtilizationCurrentOutRate	Counter
	eltSwIfUtilizationAverageInPkts	Counter
	eltSwIfUtilizationAverageInRate	Counter
	eltSwIfUtilizationAverageOutPkts	Counter
	eltSwIfUtilizationAverageOutRate	Counter

Defined Values

eltSwIfTable		1.3.6.1.4.1.35265.1.23.43.1
Switch media specific information and configuration of the device interfaces.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EltSwIfEntry

eltSwIfEntry		1.3.6.1.4.1.35265.1.23.43.1.1
Defines the contents of each line in the eltSwIfTable table.
Status: current	Access: not-accessible
OBJECT-TYPE
	EltSwIfEntry

eltSwIfIndex		1.3.6.1.4.1.35265.1.23.43.1.1.1
Index to the eltSwIfTable. The interface defined by a particular value of this index is the same interface as identified by the same value of ifIndex (MIB II).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltSwIfSfpOperationMode		1.3.6.1.4.1.35265.1.23.43.1.1.2
This variable indicates plugged in SFP transceiver operation mode.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	fiber(0), directAttach(1), copperSfp(2), unknown(3)

eltSwIfUtilizationTable		1.3.6.1.4.1.35265.1.23.43.2
Switch ports utilization configuration and information.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EltSwIfUtilizationEntry

eltSwIfUtilizationEntry		1.3.6.1.4.1.35265.1.23.43.2.1
Defines the contents of each line in the eltSwIfUtilizationTable table.
Status: current	Access: not-accessible
OBJECT-TYPE
	EltSwIfUtilizationEntry

eltSwIfUtilizationIfIndex		1.3.6.1.4.1.35265.1.23.43.2.1.1
A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltSwIfUtilizationAverageTime		1.3.6.1.4.1.35265.1.23.43.2.1.2
An average load time in seconds for which interface utilization is calculated.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

eltSwIfUtilizationCurrentInPkts		1.3.6.1.4.1.35265.1.23.43.2.1.3
The total number of all (UC, MC and BC) packets received on the interface during last 5 seconds.
Status: current	Access: read-only
OBJECT-TYPE
	Counter

eltSwIfUtilizationCurrentInRate		1.3.6.1.4.1.35265.1.23.43.2.1.4
The inbound rate in kbit/sec on the interface during last 5 seconds.
Status: current	Access: read-only
OBJECT-TYPE
	Counter

eltSwIfUtilizationCurrentOutPkts		1.3.6.1.4.1.35265.1.23.43.2.1.5
The total number of all (UC, MC and BC) packets sent out of the interface during last 5 seconds.
Status: current	Access: read-only
OBJECT-TYPE
	Counter

eltSwIfUtilizationCurrentOutRate		1.3.6.1.4.1.35265.1.23.43.2.1.6
The outbound rate in kbit/sec on the interface during last 5 seconds.
Status: current	Access: read-only
OBJECT-TYPE
	Counter

eltSwIfUtilizationAverageInPkts		1.3.6.1.4.1.35265.1.23.43.2.1.7
The total number of all (UC, MC and BC) packets received on the interface during configured load average time for this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter

eltSwIfUtilizationAverageInRate		1.3.6.1.4.1.35265.1.23.43.2.1.8
The inbound rate in kbit/sec on the interface during configured load average time for this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter

eltSwIfUtilizationAverageOutPkts		1.3.6.1.4.1.35265.1.23.43.2.1.9
The total number of all (UC, MC and BC) packets sent out of the interface during configured load average time for this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter

eltSwIfUtilizationAverageOutRate		1.3.6.1.4.1.35265.1.23.43.2.1.10
The outbound rate in kbit/sec on the interface during configured load average time for this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor