ELTEX-MES-eltBrgMulticast-MIB

File: ELTEX-MES-eltBrgMulticast-MIB.mib (2556 bytes)

Imported modules

IF-MIB	SNMPv2-TC	Q-BRIDGE-MIB
SNMPv2-SMI	RADLAN-rlMacMulticast-MIB	ELTEX-MES
INET-ADDRESS-MIB

Imported symbols

InterfaceIndex	TruthValue	TEXTUAL-CONVENTION
RowStatus	VlanIndex	PortList
MODULE-IDENTITY	OBJECT-TYPE	rlIgmpMldSnoopVlanEntry
eltMesMacMulticast	InetAddress

Defined Types

EltIgmpMldSnoopVlanEntry
SEQUENCE
	eltIgmpMldSnoopVlanIsImmediateLeaveHostBased	TruthValue
	eltIgmpMldSnoopVlanCos	INTEGER
	eltIgmpMldSnoopVlanReplaceSourceIp	InetAddress

Defined Values

eltMesMldSnoop		1.3.6.1.4.1.35265.1.23.55.5
OBJECT IDENTIFIER

eltIgmpMldSnoopVlanTable		1.3.6.1.4.1.35265.1.23.55.5.5
The table lists the per vlan parameters.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EltIgmpMldSnoopVlanEntry

eltIgmpMldSnoopVlanEntry		1.3.6.1.4.1.35265.1.23.55.5.5.1
This table augments existing RADLAN table rlIgmpMldSnoopVlanTable
Status: current	Access: not-accessible
OBJECT-TYPE
	EltIgmpMldSnoopVlanEntry

eltIgmpMldSnoopVlanIsImmediateLeaveHostBased		1.3.6.1.4.1.35265.1.23.55.5.5.1.1
Enable/Disable host based immediate leave on this Vlan
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

eltIgmpMldSnoopVlanCos		1.3.6.1.4.1.35265.1.23.55.5.5.1.2
CoS value (0-7).
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..7 | 255

eltIgmpMldSnoopVlanReplaceSourceIp		1.3.6.1.4.1.35265.1.23.55.5.5.1.3
Before forwarding the report packet sent by the host, the source IP address in the packet will be replaced by this IP address. Default value of 0.0.0.0 means that the source IP address will not be replaced.
Status: current	Access: read-write
OBJECT-TYPE
	InetAddress

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor