ELTEX-MES-LINKAGG-MIB

File: ELTEX-MES-LINKAGG-MIB.mib (3503 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-TC	SNMPv2-CONF
IF-MIB	Q-BRIDGE-MIB	IEEE8023-LAG-MIB
ELTEX-MES	RADLAN-TRUNK-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	Counter32
TimeTicks	DisplayString	MacAddress
TEXTUAL-CONVENTION	TruthValue	MODULE-COMPLIANCE
OBJECT-GROUP	InterfaceIndex	PortList
dot3adAggPortEntry	eltMesLinkAgg	rlDot3adAggBalanceEntry

Defined Types

EltAggPortEntry
SEQUENCE
	eltAggPortPassive	TruthValue

EltAggBalanceEntry
SEQUENCE
	eltAggBalanceMplsAware	TruthValue

Defined Values

eltMesLagMIB		1.3.6.1.4.1.35265.1.23.9.1
The Link Aggregation module IEEE 802.3ad extension.
MODULE-IDENTITY

eltMesLagMIBObjects		1.3.6.1.4.1.35265.1.23.9.1.1
OBJECT IDENTIFIER

eltMesLinkAggGlobal		1.3.6.1.4.1.35265.1.23.9.1.1.1
OBJECT IDENTIFIER

eltMesLinkAggPort		1.3.6.1.4.1.35265.1.23.9.1.1.2
OBJECT IDENTIFIER

eltAggPortTable		1.3.6.1.4.1.35265.1.23.9.1.1.2.1
A table that contains Link Aggregation Control configuration information about every Aggregation Port associated with this device. A row appears in this table for each physical port.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EltAggPortEntry

eltAggPortEntry		1.3.6.1.4.1.35265.1.23.9.1.1.2.1.1
A list of Link Aggregation Control configuration parameters for each Aggregation Port on this device.
Status: current	Access: not-accessible
OBJECT-TYPE
	EltAggPortEntry

eltAggPortPassive		1.3.6.1.4.1.35265.1.23.9.1.1.2.1.1.1
This value indicates wether port is LACP passive or active
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

eltAggBalanceTable		1.3.6.1.4.1.35265.1.23.9.1.1.2.2
A table that contains Eltex extension of balansing criterion used for the corresponding dot3adAggIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EltAggBalanceEntry

eltAggBalanceEntry		1.3.6.1.4.1.35265.1.23.9.1.1.2.2.1
A list of information for each dot3adAggIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	EltAggBalanceEntry

eltAggBalanceMplsAware		1.3.6.1.4.1.35265.1.23.9.1.1.2.2.1.1
If this value is TRUE, IP over MPLS traffic will be treated as IP traffic instead of as non-IP. Note that this setting will affect all device services, not only load balancing. Can't be TRUE if rlDot3adAggBalanceLayer equals 2.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor